#endif /* CFG_FLASH_PROTECTION */
+/*-----------------------------------------------------------------------
+ * Reverse the order of the erase regions in the CFI QRY structure.
+ * This is needed for chips that are either a) correctly detected as
+ * top-boot, or b) buggy.
+ */
+static void cfi_reverse_geometry(struct cfi_qry *qry)
+{
+ unsigned int i, j;
+ u32 tmp;
+
+ for (i = 0, j = qry->num_erase_regions - 1; i < j; i++, j--) {
+ tmp = qry->erase_region_info[i];
+ qry->erase_region_info[i] = qry->erase_region_info[j];
+ qry->erase_region_info[j] = tmp;
+ }
+}
/*-----------------------------------------------------------------------
* read jedec ids from device and set corresponding fields in info struct
*
* Note: assume cfi->vendor, cfi->portwidth and cfi->chipwidth are correct
*
-*/
+ */
+static void cmdset_intel_read_jedec_ids(flash_info_t *info)
+{
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
+ udelay(1000); /* some flash are slow to respond */
+ info->manufacturer_id = flash_read_uchar (info,
+ FLASH_OFFSET_MANUFACTURER_ID);
+ info->device_id = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID);
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+}
+
+static int cmdset_intel_init(flash_info_t *info, struct cfi_qry *qry)
+{
+ info->cmd_reset = FLASH_CMD_RESET;
+
+ cmdset_intel_read_jedec_ids(info);
+ flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+#ifdef CFG_FLASH_PROTECTION
+ /* read legacy lock/unlock bit from intel flash */
+ if (info->ext_addr) {
+ info->legacy_unlock = flash_read_uchar (info,
+ info->ext_addr + 5) & 0x08;
+ }
+#endif
+
+ return 0;
+}
+
+static void cmdset_amd_read_jedec_ids(flash_info_t *info)
+{
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+ flash_unlock_seq(info, 0);
+ flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
+ udelay(1000); /* some flash are slow to respond */
+ info->manufacturer_id = flash_read_uchar (info,
+ FLASH_OFFSET_MANUFACTURER_ID);
+ info->device_id = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID);
+ if (info->device_id == 0x7E) {
+ /* AMD 3-byte (expanded) device ids */
+ info->device_id2 = flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID2);
+ info->device_id2 <<= 8;
+ info->device_id2 |= flash_read_uchar (info,
+ FLASH_OFFSET_DEVICE_ID3);
+ }
+ flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+}
+
+static int cmdset_amd_init(flash_info_t *info, struct cfi_qry *qry)
+{
+ info->cmd_reset = AMD_CMD_RESET;
+
+ cmdset_amd_read_jedec_ids(info);
+ flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
+
+ /* check if flash geometry needs reversal */
+ if (qry->num_erase_regions > 1) {
+ /* reverse geometry if top boot part */
+ if (info->cfi_version < 0x3131) {
+ /* CFI < 1.1, try to guess from device id */
+ if ((info->device_id & 0x80) != 0)
+ cfi_reverse_geometry(qry);
+ } else if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
+ /* CFI >= 1.1, deduct from top/bottom flag */
+ /* note: ext_addr is valid since cfi_version > 0 */
+ cfi_reverse_geometry(qry);
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_FLASH_CFI_LEGACY
static void flash_read_jedec_ids (flash_info_t * info)
{
info->manufacturer_id = 0;
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
- flash_write_cmd(info, 0, 0, FLASH_CMD_READ_ID);
- udelay(1000); /* some flash are slow to respond */
- info->manufacturer_id = flash_read_uchar (info,
- FLASH_OFFSET_MANUFACTURER_ID);
- info->device_id = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID);
- flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ flash_read_jedec_ids_intel(info);
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
- flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
- flash_unlock_seq(info, 0);
- flash_write_cmd(info, 0, info->addr_unlock1, FLASH_CMD_READ_ID);
- udelay(1000); /* some flash are slow to respond */
- info->manufacturer_id = flash_read_uchar (info,
- FLASH_OFFSET_MANUFACTURER_ID);
- info->device_id = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID);
- if (info->device_id == 0x7E) {
- /* AMD 3-byte (expanded) device ids */
- info->device_id2 = flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID2);
- info->device_id2 <<= 8;
- info->device_id2 |= flash_read_uchar (info,
- FLASH_OFFSET_DEVICE_ID3);
- }
- flash_write_cmd(info, 0, 0, AMD_CMD_RESET);
+ flash_read_jedec_ids_amd(info);
break;
default:
break;
}
}
-#ifdef CONFIG_FLASH_CFI_LEGACY
/*-----------------------------------------------------------------------
* Call board code to request info about non-CFI flash.
* board_flash_get_legacy needs to fill in at least:
uchar num_erase_regions;
int erase_region_size;
int erase_region_count;
- int geometry_reversed = 0;
struct cfi_qry qry;
info->ext_addr = 0;
info->ext_addr = le16_to_cpu(qry.p_adr);
num_erase_regions = qry.num_erase_regions;
- flash_read_jedec_ids (info);
- flash_write_cmd (info, 0, info->cfi_offset, FLASH_CMD_CFI);
-
if (info->ext_addr) {
info->cfi_version = (ushort) flash_read_uchar (info,
info->ext_addr + 3) << 8;
info->cfi_version |= (ushort) flash_read_uchar (info,
info->ext_addr + 4);
}
+
#ifdef DEBUG
flash_printqry (&qry);
#endif
+
switch (info->vendor) {
case CFI_CMDSET_INTEL_STANDARD:
case CFI_CMDSET_INTEL_EXTENDED:
- default:
- info->cmd_reset = FLASH_CMD_RESET;
-#ifdef CFG_FLASH_PROTECTION
- /* read legacy lock/unlock bit from intel flash */
- if (info->ext_addr) {
- info->legacy_unlock = flash_read_uchar (info,
- info->ext_addr + 5) & 0x08;
- }
-#endif
+ cmdset_intel_init(info, &qry);
break;
case CFI_CMDSET_AMD_STANDARD:
case CFI_CMDSET_AMD_EXTENDED:
- info->cmd_reset = AMD_CMD_RESET;
- /* check if flash geometry needs reversal */
- if (num_erase_regions <= 1)
- break;
- /* reverse geometry if top boot part */
- if (info->cfi_version < 0x3131) {
- /* CFI < 1.1, try to guess from device id */
- if ((info->device_id & 0x80) != 0) {
- geometry_reversed = 1;
- }
- break;
- }
- /* CFI >= 1.1, deduct from top/bottom flag */
- /* note: ext_addr is valid since cfi_version > 0 */
- if (flash_read_uchar(info, info->ext_addr + 0xf) == 3) {
- geometry_reversed = 1;
- }
+ cmdset_amd_init(info, &qry);
break;
+ default:
+ printf("CFI: Unknown command set 0x%x\n",
+ info->vendor);
+ /*
+ * Unfortunately, this means we don't know how
+ * to get the chip back to Read mode. Might
+ * as well try an Intel-style reset...
+ */
+ flash_write_cmd(info, 0, 0, FLASH_CMD_RESET);
+ return 0;
}
debug ("manufacturer is %d\n", info->vendor);
sect_cnt = 0;
sector = base;
for (i = 0; i < num_erase_regions; i++) {
- unsigned int region = i;
-
if (i > NUM_ERASE_REGIONS) {
printf ("%d erase regions found, only %d used\n",
num_erase_regions, NUM_ERASE_REGIONS);
break;
}
- if (geometry_reversed)
- region = num_erase_regions - 1 - i;
- tmp = le32_to_cpu(qry.erase_region_info[region]);
- debug("erase region %u: 0x%08lx\n", region, tmp);
+ tmp = le32_to_cpu(qry.erase_region_info[i]);
+ debug("erase region %u: 0x%08lx\n", i, tmp);
erase_region_count = (tmp & 0xffff) + 1;
tmp >>= 16;