#define CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT (0)
#define CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT (0)
#define CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT (0)
-#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (3)
-#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (3)
-#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (12)
+#define CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT (511)
+#define CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT (511)
+#define CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT (15)
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK (1)
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK (1)
#define CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK (1)
/* Peripheral PLL */
#define CONFIG_HPS_PERPLLGRP_VCO_DENOM (1)
-#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (79)
+#define CONFIG_HPS_PERPLLGRP_VCO_NUMER (39)
/*
* To tell where is the VCOs source:
* 0 = EOSC1
*/
#define CONFIG_HPS_PERPLLGRP_VCO_PSRC (0)
#define CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT (3)
-#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (3)
-#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (1)
+#define CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT (511)
+#define CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT (511)
#define CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT (4)
#define CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT (4)
-#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (9)
+#define CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT (511)
#define CONFIG_HPS_PERPLLGRP_DIV_USBCLK (0)
-#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (0)
+#define CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK (4)
#define CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK (1)
#define CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK (1)
#define CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK (6249)
#define CONFIG_HPS_PERPLLGRP_SRC_QSPI (1)
/* SDRAM PLL */
-#ifdef CONFIG_SOCFPGA_ARRIA5
-/* Arria V SDRAM will run at 533MHz while Cyclone V still at 400MHz
- * This if..else... is not required if generated by tools */
#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (2)
-#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (127)
-#else
-#define CONFIG_HPS_SDRPLLGRP_VCO_DENOM (0)
-#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (31)
-#endif /* CONFIG_SOCFPGA_ARRIA5 */
+#define CONFIG_HPS_SDRPLLGRP_VCO_NUMER (79)
/*
* To tell where is the VCOs source:
/* Info for driver */
#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
-#define CONFIG_HPS_CLK_OSC2_HZ 0
+#define CONFIG_HPS_CLK_OSC2_HZ (25000000)
#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
-#ifdef CONFIG_SOCFPGA_ARRIA5
-/* The if..else... is not required if generated by tools */
-#define CONFIG_HPS_CLK_SDRVCO_HZ (1066000000)
-#else
-#define CONFIG_HPS_CLK_SDRVCO_HZ (800000000)
-#endif
+#define CONFIG_HPS_CLK_SDRVCO_HZ (666666666)
#define CONFIG_HPS_CLK_EMAC0_HZ (250000000)
#define CONFIG_HPS_CLK_EMAC1_HZ (250000000)
#define CONFIG_HPS_CLK_USBCLK_HZ (200000000)