case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
case BOOT_DEVICE_MMC2_2:
-#if defined(CONFIG_SPL_FAT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT)
return MMCSD_MODE_FS;
#elif defined(CONFIG_SUPPORT_EMMC_BOOT)
return MMCSD_MODE_EMMCBOOT;
#endif
/* Everything else use filesystem if available */
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
return MMCSD_MODE_FS;
#else
return MMCSD_MODE_RAW;
select USE_TINY_PRINTF
imply NAND_OMAP_GPMC
imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
+ imply SPL_FS_FAT
imply SPL_GPIO_SUPPORT
imply SPL_I2C_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
imply NAND_OMAP_GPMC
imply SPL_DISPLAY_PRINT
imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
+ imply SPL_FS_FAT
imply SPL_GPIO_SUPPORT
imply SPL_I2C_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
imply SPL_DISPLAY_PRINT
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
+ imply SPL_FS_FAT
imply SPL_GPIO_SUPPORT
imply SPL_I2C_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
imply SPL_DM_SEQ_ALIAS
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
+ imply SPL_FS_FAT
imply SPL_GPIO_SUPPORT
imply SPL_I2C_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
imply SPI_FLASH_BAR
imply SPL_ENV_SUPPORT
imply SPL_EXT_SUPPORT
- imply SPL_FAT_SUPPORT
+ imply SPL_FS_FAT
imply SPL_GPIO_SUPPORT
imply SPL_I2C_SUPPORT
imply SPL_LIBCOMMON_SUPPORT
#ifdef CONFIG_SPL_MMC_SUPPORT
u32 spl_boot_mode(const u32 boot_device)
{
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
return MMCSD_MODE_FS;
#else
return MMCSD_MODE_RAW;
#ifdef CONFIG_SPL_MMC_SUPPORT
u32 spl_boot_mode(const u32 boot_device)
{
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
return MMCSD_MODE_FS;
#else
return MMCSD_MODE_RAW;
#ifdef CONFIG_SPL_MMC_SUPPORT
u32 spl_boot_mode(const u32 boot_device)
{
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
return MMCSD_MODE_FS;
#else
return MMCSD_MODE_RAW;
config SPL_LDSCRIPT
default "arch/arm/mach-zynq/u-boot-spl.lds"
-config SPL_FAT_SUPPORT
+config SPL_FS_FAT
default y
config SPL_LIBCOMMON_SUPPORT
if ARCH_ZYNQMP
-config SPL_FAT_SUPPORT
+config SPL_FS_FAT
default y
config SPL_LIBCOMMON_SUPPORT
filesystem from within SPL. Support for the underlying block
device (e.g. MMC or USB) must be enabled separately.
-config SPL_FAT_SUPPORT
+config SPL_FS_FAT
bool "Support FAT filesystems"
select FS_FAT
help
obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
obj-$(CONFIG_$(SPL_TPL_)OPTEE) += spl_optee.o
obj-$(CONFIG_$(SPL_TPL_)USB_SUPPORT) += spl_usb.o
-obj-$(CONFIG_$(SPL_TPL_)FAT_SUPPORT) += spl_fat.o
+obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
obj-$(CONFIG_$(SPL_TPL_)EXT_SUPPORT) += spl_ext.o
obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o
obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
{
int err = -ENOSYS;
-#ifdef CONFIG_SPL_FAT_SUPPORT
+#ifdef CONFIG_SPL_FS_FAT
if (!spl_start_uboot()) {
err = spl_load_image_fat_os(spl_image, mmc_get_blk_desc(mmc),
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION);
#endif
#endif
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
err = -ENOENT;
#endif
u32 __weak spl_boot_mode(const u32 boot_device)
{
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
return MMCSD_MODE_FS;
#elif defined(CONFIG_SUPPORT_EMMC_BOOT)
return MMCSD_MODE_EMMCBOOT;
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_VERBOSE=y
CONFIG_ISW_ENTRY_ADDR=0x40301950
# CONFIG_SPL_MMC_SUPPORT is not set
CONFIG_SPL=y
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_LOCALVERSION="-EETS-1.0.0"
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SERIES=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SHC_ICT=y
CONFIG_SERIES=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SHC_NETBOOT=y
CONFIG_SERIES=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SHC_SDBOOT=y
CONFIG_SERIES=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_BAV_VERSION=1
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_BAV_VERSION=2
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=1
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_CMD_HDMIDETECT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_EXTRA_OPTIONS="REV1"
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_EXTRA_OPTIONS="REV3"
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC"
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xf8020000
CONFIG_DEBUG_UART_CLOCK=82000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xf8020000
CONFIG_DEBUG_UART_CLOCK=82000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xf8020000
CONFIG_DEBUG_UART_CLOCK=83000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xf8020000
CONFIG_DEBUG_UART_CLOCK=83000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xfc00c000
CONFIG_DEBUG_UART_CLOCK=100000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_DEBUG_UART_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xfc00c000
CONFIG_DEBUG_UART_CLOCK=88000000
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y
CONFIG_SPL=y
CONFIG_IDENT_STRING="socfpga_stratix10"
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_BOOTDELAY=5
CONFIG_SPL_SPI_LOAD=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
-CONFIG_SPL_FAT_SUPPORT=y
+CONFIG_SPL_FS_FAT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SPL=y
CONFIG_DEBUG_UART_BASE=0xff000000
CONFIG_DEBUG_UART_CLOCK=100000000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
# CONFIG_SPL_LIBDISK_SUPPORT is not set
CONFIG_ZYNQMP_USB=y
CONFIG_DEBUG_UART=y
CONFIG_DEBUG_UART_CLOCK=50000000
CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011"
CONFIG_SPL_STACK_R_ADDR=0x200000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_DEBUG_UART_CLOCK=50000000
CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM011 x16"
CONFIG_SPL_STACK_R_ADDR=0x200000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM012"
CONFIG_SPL_STACK_R_ADDR=0x200000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" Xilinx Zynq ZC770 XM013"
CONFIG_SPL_STACK_R_ADDR=0x200000
-# CONFIG_SPL_FAT_SUPPORT is not set
+# CONFIG_SPL_FS_FAT is not set
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SPL_SERIAL_SUPPORT (drivers/serial/libserial.o)
CONFIG_SPL_SPI_FLASH_SUPPORT (drivers/mtd/spi/libspi_flash.o)
CONFIG_SPL_SPI_SUPPORT (drivers/spi/libspi.o)
-CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
+CONFIG_SPL_FS_FAT (fs/fat/libfat.o)
CONFIG_SPL_EXT_SUPPORT
CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o)
CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o)
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_FS_LOADER) += fs.o
-obj-$(CONFIG_SPL_FAT_SUPPORT) += fat/
+obj-$(CONFIG_SPL_FS_FAT) += fat/
obj-$(CONFIG_SPL_EXT_SUPPORT) += ext4/
else
obj-y += fs.o
#endif
/* Define the payload for FAT/EXT support */
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
# ifdef CONFIG_OF_CONTROL
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
# else
#endif
/* Define the payload for FAT/EXT support */
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
# ifdef CONFIG_OF_CONTROL
# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
# else
/* SPL SDMMC boot support */
#ifdef CONFIG_SPL_MMC_SUPPORT
-#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_EXT_SUPPORT)
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
#endif
*/
#ifdef CONFIG_SPL_BUILD
# define part_print_ptr(x) NULL
-# if defined(CONFIG_SPL_EXT_SUPPORT) || defined(CONFIG_SPL_FAT_SUPPORT) || \
+# if defined(CONFIG_SPL_EXT_SUPPORT) || defined(CONFIG_SPL_FS_FAT) || \
defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION)
# define part_get_info_ptr(x) x
# else