cm-t35: update config file
authorIgor Grinberg <grinberg@compulab.co.il>
Mon, 22 Apr 2013 01:06:55 +0000 (01:06 +0000)
committerTom Rini <trini@ti.com>
Fri, 10 May 2013 12:25:56 +0000 (08:25 -0400)
Several minor updates to the cm-t35 config file.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
include/configs/cm_t35.h

index 726714dd2118f8c193d8921406c385d3adf15d5d..c6e357a8ceb350412211cefcec17e60e1809f54d 100644 (file)
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2                /* EXT2 Support                 */
 #define CONFIG_CMD_FAT         /* FAT support                  */
-#define CONFIG_CMD_JFFS2       /* JFFS2 Support                */
 #define CONFIG_CMD_MTDPARTS    /* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE      /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT         "nand0=nand"
 #define MTDPARTS_DEFAULT       "mtdparts=nand:512k(x-loader),"\
-                               "1920k(u-boot),128k(u-boot-env),"\
+                               "1920k(u-boot),256k(u-boot-env),"\
                                "4m(kernel),-(fs)"
 
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1               /* Max number of NAND */
                                                        /* devices */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV               "nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET       0x680000
-#define CONFIG_JFFS2_PART_SIZE         0xf980000       /* size of jffs2 */
-                                                       /* partition */
-
 /* Environment information */
 #define CONFIG_BOOTDELAY               10
 #define CONFIG_ZERO_BOOTDELAY_CHECK
        "defaultdisplay=dvi\0" \
        "mmcdev=0\0" \
        "mmcroot=/dev/mmcblk0p2 rw\0" \
-       "mmcrootfstype=ext3 rootwait\0" \
+       "mmcrootfstype=ext4 rootwait\0" \
        "nandroot=/dev/mtdblock4 rw\0" \
-       "nandrootfstype=jffs2\0" \
+       "nandrootfstype=ubifs\0" \
        "mmcargs=setenv bootargs console=${console} " \
                "mpurate=${mpurate} " \
                "vram=${vram} " \
                "bootm ${loadaddr}\0" \
        "nandboot=echo Booting from nand ...; " \
                "run nandargs; " \
-               "nand read ${loadaddr} 280000 400000; " \
+               "nand read ${loadaddr} 2a0000 400000; " \
                "bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \