D: Support for SSV ADNP/ESC1 (Nios Cyclone)
W: http://www.li-pro.net
+N: Dave Liu
+E: daveliu@freescale.com
+D: Support for MPC832x, MPC8360, MPC837x
+W: www.freescale.com
+
N: Raymond Lo
E: lo@routefree.com
D: Support for DOS partitions
Dave Liu <daveliu@freescale.com>
+ MPC832XEMDS MPC832x
MPC8360EMDS MPC8360
+ MPC837XEMDS MPC837x
Nye Liu <nyet@zumanetworks.com>
MPC8349ITXGP \
MPC8360EMDS \
MPC8360EMDS_ATM \
+ MPC837XEMDS \
sbc8349 \
TQM834x \
"
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
+MPC837XEMDS_config \
+MPC837XEMDS_HOST_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _HOST_,$@)" ] ; then \
+ echo -n "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
+
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
*/
#include <common.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#include <pci.h>
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#else
#include <asm/mmu.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_PQ_MDS_PIB)
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#include <common.h>
#include <pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
#include <asm/fsl_i2c.h>
#endif /* CONFIG_PCISLAVE */
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(hose[0].first_busno);
- tmp[1] = cpu_to_be32(hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = hose[0].first_busno;
- p[1] = hose[0].last_busno;
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(hose[0].first_busno);
+ tmp[1] = cpu_to_be32(hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
}
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#include <pci.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
}
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#ifdef CONFIG_MPC83XX_PCI2
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");
- if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#endif
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
- }
-
-#ifdef CONFIG_MPC83XX_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
}
-#endif
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#else
#include <asm/mmu.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#include <pci.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
}
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#ifdef CONFIG_MPC83XX_PCI2
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
- if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#endif
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
- }
-
-#ifdef CONFIG_MPC83XX_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
}
-#endif
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#else
#include <asm/mmu.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_PQ_MDS_PIB)
{0, 1, 3, 0, 2}, /* MDIO */
{0, 2, 1, 0, 1}, /* MDC */
+ {5, 0, 1, 0, 2}, /* UART2_SOUT */
+ {5, 1, 2, 0, 3}, /* UART2_CTS */
+ {5, 2, 1, 0, 1}, /* UART2_RTS */
+ {5, 3, 2, 0, 2}, /* UART2_SIN */
+
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
};
immr->sysconf.spridr == SPR_8360E_REV21)
bcsr[0xe] = 0x30;
+ /* Enable second UART */
+ bcsr[0x9] &= ~0x01;
+
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
+ const immap_t *immr = (immap_t *)CFG_IMMR;
+
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+ /*
+ * mpc8360ea pb mds errata 2: RGMII timing
+ * if on mpc8360ea rev. 2.1,
+ * change both ucc phy-connection-types from rgmii-id to rgmii-rxid
+ */
+ if (immr->sysconf.spridr == SPR_8360_REV21 ||
+ immr->sysconf.spridr == SPR_8360E_REV21) {
+ int nodeoffset;
+ const char *prop;
+ const char *path;
+
+ nodeoffset = fdt_path_offset(fdt, "/aliases");
+ if (nodeoffset >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+ /* fixup UCC 1 if using rgmii-id mode */
+ path = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (path) {
+ prop = fdt_getprop(blob, nodeoffset,
+ "phy-connection-type", 0);
+ if (prop && (strcmp(prop, "rgmii-id") == 0))
+ fdt_setprop(blob, nodeoffset, "phy-connection-type",
+ "rgmii-rxid", sizeof("rgmii-rxid"));
+ }
+#endif
+#if defined(CONFIG_HAS_ETH1)
+ /* fixup UCC 2 if using rgmii-id mode */
+ path = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (path) {
+ prop = fdt_getprop(blob, nodeoffset,
+ "phy-connection-type", 0);
+ if (prop && (strcmp(prop, "rgmii-id") == 0))
+ fdt_setprop(blob, nodeoffset, "phy-connection-type",
+ "rgmii-rxid", sizeof("rgmii-rxid"));
+ }
+#endif
+ }
+ }
}
#endif
#include <common.h>
#include <pci.h>
#include <i2c.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
+#include <fdt_support.h>
#endif
#include <asm/fsl_i2c.h>
#endif /* CONFIG_PCISLAVE */
#if defined(CONFIG_OF_LIBFDT)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(hose[0].first_busno);
- tmp[1] = cpu_to_be32(hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = hose[0].first_busno;
- p[1] = hose[0].last_busno;
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(hose[0].first_busno);
+ tmp[1] = cpu_to_be32(hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
}
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := $(BOARD).o pci.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC837xEMDS
+#
+
+TEXT_BASE = 0xFE000000
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * CREDITS: Kim Phillips contribute to LIBFDT code
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <spd.h>
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#endif
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#endif
+#if defined(CONFIG_PQ_MDS_PIB)
+#include "../common/pq-mds-pib.h"
+#endif
+
+int board_early_init_f(void)
+{
+ u8 *bcsr = (u8 *)CFG_BCSR;
+
+ /* Enable flash write */
+ bcsr[0x9] &= ~0x04;
+ /* Clear all of the interrupt of BCSR */
+ bcsr[0xe] = 0xff;
+
+ return 0;
+}
+
+int board_early_init_r(void)
+{
+#ifdef CONFIG_PQ_MDS_PIB
+ pib_init();
+#endif
+ return 0;
+}
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+extern void ddr_enable_ecc(unsigned int dram_size);
+#endif
+int fixed_sdram(void);
+
+long int initdram(int board_type)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = 0;
+
+ if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
+ return -1;
+
+#if defined(CONFIG_SPD_EEPROM)
+ msize = spd_sdram();
+#else
+ msize = fixed_sdram();
+#endif
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+ /* Initialize DDR ECC byte */
+ ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+
+ /* return total bus DDR size(bytes) */
+ return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ * fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+ volatile immap_t *im = (immap_t *) CFG_IMMR;
+ u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ u32 msize_log2 = __ilog2(msize);
+
+ im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
+
+#if (CFG_DDR_SIZE != 512)
+#warning Currenly any ddr size other than 512 is not supported
+#endif
+ im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+ udelay(50000);
+
+ im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+ udelay(1000);
+
+ im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+ udelay(1000);
+
+ im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CFG_DDR_MODE;
+ im->ddr.sdram_mode2 = CFG_DDR_MODE2;
+ im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ __asm__ __volatile__("sync");
+ udelay(1000);
+
+ im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+ udelay(2000);
+ return CFG_DDR_SIZE;
+}
+#endif /*!CFG_SPD_EEPROM */
+
+int checkboard(void)
+{
+ puts("Board: Freescale MPC837xEMDS\n");
+ return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+ ft_cpu_setup(blob, bd);
+#ifdef CONFIG_PCI
+ ft_pci_setup(blob, bd);
+#endif
+}
+#endif /* CONFIG_OF_BOARD_SETUP */
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <asm/mmu.h>
+#include <asm/io.h>
+#include <common.h>
+#include <mpc83xx.h>
+#include <pci.h>
+#include <i2c.h>
+#include <asm/fsl_i2c.h>
+
+#if defined(CONFIG_PCI)
+static struct pci_region pci_regions[] = {
+ {
+ bus_start: CFG_PCI_MEM_BASE,
+ phys_start: CFG_PCI_MEM_PHYS,
+ size: CFG_PCI_MEM_SIZE,
+ flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+ },
+ {
+ bus_start: CFG_PCI_MMIO_BASE,
+ phys_start: CFG_PCI_MMIO_PHYS,
+ size: CFG_PCI_MMIO_SIZE,
+ flags: PCI_REGION_MEM
+ },
+ {
+ bus_start: CFG_PCI_IO_BASE,
+ phys_start: CFG_PCI_IO_PHYS,
+ size: CFG_PCI_IO_SIZE,
+ flags: PCI_REGION_IO
+ }
+};
+
+void pci_init_board(void)
+{
+ volatile immap_t *immr = (volatile immap_t *)CFG_IMMR;
+ volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk;
+ volatile law83xx_t *pci_law = immr->sysconf.pcilaw;
+ struct pci_region *reg[] = { pci_regions };
+
+ /* Enable all 5 PCI_CLK_OUTPUTS */
+ clk->occr |= 0xf8000000;
+ udelay(2000);
+
+ /* Configure PCI Local Access Windows */
+ pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR;
+ pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB;
+
+ pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR;
+ pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB;
+
+ udelay(2000);
+
+ mpc83xx_pci_init(1, reg, 0);
+}
+#endif /* CONFIG_PCI */
#include <pci.h>
#include <asm/mpc8349_pci.h>
#include <i2c.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
+#include <fdt_support.h>
+#endif
DECLARE_GLOBAL_DATA_PTR;
}
-#ifdef CONFIG_OF_FLAT_TREE
-void
-ft_pci_setup(void *blob, bd_t *bd)
+#if defined(CONFIG_OF_LIBFDT)
+void ft_pci_setup(void *blob, bd_t *bd)
{
- u32 *p;
- int len;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
+ int nodeoffset;
+ int tmp[2];
+ const char *path;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
}
-
#ifdef CONFIG_MPC83XX_PCI2
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p != NULL) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
- }
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
#endif
+ }
}
-#endif /* CONFIG_OF_FLAT_TREE */
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_PCI */
#include <i2c.h>
#include <spd.h>
#include <miiphy.h>
-#include <command.h>
#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
+#if defined(CONFIG_OF_LIBFDT)
+#include <libfdt.h>
#endif
int fixed_sdram(void);
}
#endif
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-/*
- * ECC user commands
- */
-void ecc_print_status(void)
-{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
-
- printf("\nECC mode: %s\n\n", (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
- /* Interrupts */
- printf("Memory Error Interrupt Enable:\n");
- printf(" Multiple-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
- printf(" Single-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
- printf(" Memory Select Error Interrupt Enable: %d\n\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
- /* Error disable */
- printf("Memory Error Disable:\n");
- printf(" Multiple-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
- printf(" Memory Select Error Disable: %d\n\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
- /* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08lx %08lx\n",
- ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
- printf("Memory Data Path Error Injection Mask ECC:\n");
- printf(" ECC Mirror Byte: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
- printf(" ECC Injection Enable: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
- printf(" ECC Error Injection Mask: 0x%02x\n\n",
- ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
- /* SBE counter/threshold */
- printf("Memory Single-Bit Error Management (0..255):\n");
- printf(" Single-Bit Error Threshold: %d\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
- printf(" Single-Bit Error Counter: %d\n\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
- /* Error detect */
- printf("Memory Error Detect:\n");
- printf(" Multiple Memory Errors: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
- printf(" Multiple-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
- printf(" Single-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
- printf(" Memory Select Error: %d\n\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
- /* Capture data */
- printf("Memory Error Address Capture: 0x%08lx\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08lx %08lx\n",
- ddr->capture_data_hi, ddr->capture_data_lo);
- printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
- ddr->capture_ecc & CAPTURE_ECC_ECE);
-
- printf("Memory Error Attributes Capture:\n");
- printf(" Data Beat Number: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >> ECC_CAPT_ATTR_BNUM_SHIFT);
- printf(" Transaction Size: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >> ECC_CAPT_ATTR_TSIZ_SHIFT);
- printf(" Transaction Source: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >> ECC_CAPT_ATTR_TSRC_SHIFT);
- printf(" Transaction Type: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >> ECC_CAPT_ATTR_TTYP_SHIFT);
- printf(" Error Information Valid: %d\n\n",
- ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile u32 val;
- u64 *addr, count, val64;
- register u64 *i;
-
- if (argc > 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- if (argc == 2) {
- if (strcmp(argv[1], "status") == 0) {
- ecc_print_status();
- return 0;
- } else if (strcmp(argv[1], "captureclear") == 0) {
- ddr->capture_address = 0;
- ddr->capture_data_hi = 0;
- ddr->capture_data_lo = 0;
- ddr->capture_ecc = 0;
- ddr->capture_attributes = 0;
- return 0;
- }
- }
-
- if (argc == 3) {
- if (strcmp(argv[1], "sbecnt") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "sbethr") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBET_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "errdisable") == 0) {
- val = ddr->err_disable;
-
- if (strcmp(argv[2], "+sbe") == 0) {
- val |= ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "+mbe") == 0) {
- val |= ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "+mse") == 0) {
- val |= ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "+all") == 0) {
- val |= (ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else if (strcmp(argv[2], "-sbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "-mbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "-mse") == 0) {
- val &= ~ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "-all") == 0) {
- val &= ~(ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else {
- printf("Incorrect err_disable field\n");
- return 1;
- }
-
- ddr->err_disable = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "errdetectclr") == 0) {
- val = ddr->err_detect;
-
- if (strcmp(argv[2], "mme") == 0) {
- val |= ECC_ERROR_DETECT_MME;
- } else if (strcmp(argv[2], "sbe") == 0) {
- val |= ECC_ERROR_DETECT_SBE;
- } else if (strcmp(argv[2], "mbe") == 0) {
- val |= ECC_ERROR_DETECT_MBE;
- } else if (strcmp(argv[2], "mse") == 0) {
- val |= ECC_ERROR_DETECT_MSE;
- } else if (strcmp(argv[2], "all") == 0) {
- val |= (ECC_ERROR_DETECT_MME |
- ECC_ERROR_DETECT_MBE |
- ECC_ERROR_DETECT_SBE |
- ECC_ERROR_DETECT_MSE);
- } else {
- printf("Incorrect err_detect field\n");
- return 1;
- }
-
- ddr->err_detect = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatahi") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_hi = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatalo") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_lo = val;
- return 0;
- } else if (strcmp(argv[1], "injectecc") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
- if (val > 0xff) {
- printf("Incorrect ECC inject mask, should be 0x00..0xff\n");
- return 1;
- }
- val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
- ddr->ecc_err_inject = val;
- return 0;
- } else if (strcmp(argv[1], "inject") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EIEN;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EIEN;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- return 0;
- } else if (strcmp(argv[1], "mirror") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EMB;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EMB;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- return 0;
- }
- }
-
- if (argc == 4) {
- if (strcmp(argv[1], "test") == 0) {
- addr = (u64 *)simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32)addr % 8) {
- printf("Address not alligned on double word boundary\n");
- return 1;
- }
-
- disable_interrupts();
- icache_disable();
-
- for (i = addr; i < addr + count; i++) {
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* write memory location injecting errors */
- *i = 0x1122334455667788ULL;
- __asm__ __volatile__ ("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* read data, this generates ECC error */
- val64 = *i;
- __asm__ __volatile__ ("sync");
-
- /* disable errors for ECC */
- ddr->err_disable |= ~ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* re-initialize memory, write the location again
- * NOT injecting errors this time */
- *i = 0xcafecafecafecafeULL;
- __asm__ __volatile__ ("sync");
-
- /* enable errors for ECC */
- ddr->err_disable &= ECC_ERROR_ENABLE;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
- }
-
- icache_enable();
- enable_interrupts();
-
- return 0;
- }
- }
-
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
-}
-
-U_BOOT_CMD(
- ecc, 4, 0, do_ecc,
- "ecc - support for DDR ECC features\n",
- "status - print out status info\n"
- "ecc captureclear - clear capture regs data\n"
- "ecc sbecnt <val> - set Single-Bit Error counter\n"
- "ecc sbethr <val> - set Single-Bit Threshold\n"
- "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
- " [-|+]sbe - Single-Bit Error\n"
- " [-|+]mbe - Multiple-Bit Error\n"
- " [-|+]mse - Memory Select Error\n"
- " [-|+]all - all errors\n"
- "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
- " mme - Multiple Memory Errors\n"
- " sbe - Single-Bit Error\n"
- " mbe - Multiple-Bit Error\n"
- " mse - Memory Select Error\n"
- " all - all errors\n"
- "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
- "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
- "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
- "ecc inject <en|dis> - enable/disable error injection\n"
- "ecc mirror <en|dis> - enable/disable mirror byte\n"
- "ecc test <addr> <cnt> - test mem region:\n"
- " - enables injects\n"
- " - writes pattern injecting errors\n"
- " - disables injects\n"
- " - reads pattern back, generates error\n"
- " - re-inits memory"
-);
-#endif /* if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD) */
-
-#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
+ ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
- ft_cpu_setup(blob, bd);
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
}
#endif
START = start.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- spd_sdram.o ecc.o qe_io.o pci.o
+ spd_sdram.o ecc.o qe_io.o pci.o fdt.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#include <command.h>
#include <mpc83xx.h>
#include <asm/processor.h>
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
-#include <fdt_support.h>
-#endif
DECLARE_GLOBAL_DATA_PTR;
printf("e300c3, ");
break;
+ case PVR_E300C4:
+ printf("e300c4, ");
+ break;
+
default:
printf("Unknown core, ");
}
case SPR_8313E_REV10:
puts("MPC8313E, ");
break;
+ case SPR_8315E_REV10:
+ puts("MPC8315E, ");
+ break;
+ case SPR_8315_REV10:
+ puts("MPC8315, ");
+ break;
+ case SPR_8314E_REV10:
+ puts("MPC8314E, ");
+ break;
+ case SPR_8314_REV10:
+ puts("MPC8314, ");
+ break;
+ case SPR_8379E_REV10:
+ puts("MPC8379E, ");
+ break;
+ case SPR_8379_REV10:
+ puts("MPC8379, ");
+ break;
+ case SPR_8378E_REV10:
+ puts("MPC8378E, ");
+ break;
+ case SPR_8378_REV10:
+ puts("MPC8378, ");
+ break;
+ case SPR_8377E_REV10:
+ puts("MPC8377E, ");
+ break;
+ case SPR_8377_REV10:
+ puts("MPC8377, ");
+ break;
default:
printf("Rev: Unknown revision number:%08x\n"
"Warning: Unsupported cpu revision!\n",spridr);
}
#endif
-#if defined(CONFIG_OF_LIBFDT)
-
-/*
- * "Setter" functions used to add/modify FDT entries.
- */
-static int fdt_set_eth0(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enetaddr, 6);
- }
- return 0;
-}
-#ifdef CONFIG_HAS_ETH1
-/* second onboard ethernet port */
-static int fdt_set_eth1(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enet1addr, 6);
- }
- return 0;
-}
-#endif
-#ifdef CONFIG_HAS_ETH2
-/* third onboard ethernet port */
-static int fdt_set_eth2(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enet2addr, 6);
- }
- return 0;
-}
-#endif
-#ifdef CONFIG_HAS_ETH3
-/* fourth onboard ethernet port */
-static int fdt_set_eth3(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- /* Fix it up if it exists, don't create it if it doesn't exist */
- if (fdt_get_property(blob, nodeoffset, name, 0)) {
- return fdt_setprop(blob, nodeoffset, name, bd->bi_enet3addr, 6);
- }
- return 0;
-}
-#endif
-
-static int fdt_set_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(bd->bi_busfreq);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-static int fdt_set_tbfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(OF_TBCLK);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-
-static int fdt_set_clockfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(gd->core_clk);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-#ifdef CONFIG_QE
-static int fdt_set_qe_busfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(gd->qe_clk);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-
-static int fdt_set_qe_brgfreq(void *blob, int nodeoffset, const char *name, bd_t *bd)
-{
- u32 tmp;
- /* Create or update the property */
- tmp = cpu_to_be32(gd->brg_clk);
- return fdt_setprop(blob, nodeoffset, name, &tmp, sizeof(tmp));
-}
-#endif
-
-/*
- * Fixups to the fdt.
- */
-static const struct {
- char *node;
- char *prop;
- int (*set_fn)(void *blob, int nodeoffset, const char *name, bd_t *bd);
-} fixup_props[] = {
- { "/cpus/" OF_CPU,
- "timebase-frequency",
- fdt_set_tbfreq
- },
- { "/cpus/" OF_CPU,
- "bus-frequency",
- fdt_set_busfreq
- },
- { "/cpus/" OF_CPU,
- "clock-frequency",
- fdt_set_clockfreq
- },
- { "/" OF_SOC,
- "bus-frequency",
- fdt_set_busfreq
- },
- { "/" OF_SOC "/serial@4500",
- "clock-frequency",
- fdt_set_busfreq
- },
- { "/" OF_SOC "/serial@4600",
- "clock-frequency",
- fdt_set_busfreq
- },
-#ifdef CONFIG_TSEC1
- { "/" OF_SOC "/ethernet@24000",
- "mac-address",
- fdt_set_eth0
- },
- { "/" OF_SOC "/ethernet@24000",
- "local-mac-address",
- fdt_set_eth0
- },
-#endif
-#ifdef CONFIG_TSEC2
- { "/" OF_SOC "/ethernet@25000",
- "mac-address",
- fdt_set_eth1
- },
- { "/" OF_SOC "/ethernet@25000",
- "local-mac-address",
- fdt_set_eth1
- },
-#endif
-#ifdef CONFIG_QE
- { "/" OF_QE,
- "brg-frequency",
- fdt_set_qe_brgfreq
- },
- { "/" OF_QE,
- "bus-frequency",
- fdt_set_qe_busfreq
- },
-#ifdef CONFIG_UEC_ETH1
-#if CFG_UEC1_UCC_NUM == 0 /* UCC1 */
- { "/" OF_QE "/ucc@2000",
- "mac-address",
- fdt_set_eth0
- },
- { "/" OF_QE "/ucc@2000",
- "local-mac-address",
- fdt_set_eth0
- },
-#elif CFG_UEC1_UCC_NUM == 2 /* UCC3 */
- { "/" OF_QE "/ucc@2200",
- "mac-address",
- fdt_set_eth0
- },
- { "/" OF_QE "/ucc@2200",
- "local-mac-address",
- fdt_set_eth0
- },
-#endif
-#endif /* CONFIG_UEC_ETH1 */
-#ifdef CONFIG_UEC_ETH2
-#if CFG_UEC2_UCC_NUM == 1 /* UCC2 */
- { "/" OF_QE "/ucc@3000",
- "mac-address",
- fdt_set_eth1
- },
- { "/" OF_QE "/ucc@3000",
- "local-mac-address",
- fdt_set_eth1
- },
-#elif CFG_UEC2_UCC_NUM == 3 /* UCC4 */
- { "/" OF_QE "/ucc@3200",
- "mac-address",
- fdt_set_eth1
- },
- { "/" OF_QE "/ucc@3200",
- "local-mac-address",
- fdt_set_eth1
- },
-#endif
-#endif /* CONFIG_UEC_ETH2 */
-#endif /* CONFIG_QE */
-};
-
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
- int nodeoffset;
- int err;
- int j;
-
- for (j = 0; j < (sizeof(fixup_props) / sizeof(fixup_props[0])); j++) {
- nodeoffset = fdt_path_offset(blob, fixup_props[j].node);
- if (nodeoffset >= 0) {
- err = fixup_props[j].set_fn(blob, nodeoffset,
- fixup_props[j].prop, bd);
- if (err < 0)
- debug("Problem setting %s = %s: %s\n",
- fixup_props[j].node, fixup_props[j].prop,
- fdt_strerror(err));
- } else {
- debug("Couldn't find %s: %s\n",
- fixup_props[j].node, fdt_strerror(nodeoffset));
- }
- }
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#elif defined(CONFIG_OF_FLAT_TREE)
-void
-ft_cpu_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
- ulong clock;
-
- clock = bd->bi_busfreq;
- p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
- p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len);
- if (p != NULL)
- *p = cpu_to_be32(clock);
-
-#ifdef CONFIG_TSEC1
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-#endif
-
-#ifdef CONFIG_TSEC2
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-
- p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-#endif
-
-#ifdef CONFIG_UEC_ETH1
-#if CFG_UEC1_UCC_NUM == 0 /* UCC1 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-#elif CFG_UEC1_UCC_NUM == 2 /* UCC3 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2200/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@2200/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enetaddr, 6);
-#endif
-#endif
-
-#ifdef CONFIG_UEC_ETH2
-#if CFG_UEC2_UCC_NUM == 1 /* UCC2 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-#elif CFG_UEC2_UCC_NUM == 3 /* UCC4 */
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3200/mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-
- p = ft_get_prop(blob, "/" OF_QE "/ucc@3200/local-mac-address", &len);
- if (p != NULL)
- memcpy(p, bd->bi_enet1addr, 6);
-#endif
-#endif
-}
-#endif
-
#if defined(CONFIG_DDR_ECC)
void dma_init(void)
{
/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#ifdef CFG_DDRCDR
im->sysconf.ddrcdr = CFG_DDRCDR;
#endif
+ /* Output buffer impedance register */
+#ifdef CFG_OBIR
+ im->sysconf.obir = CFG_OBIR;
+#endif
#ifdef CONFIG_QE
/* Config QE ioports */
--- /dev/null
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_OF_LIBFDT)
+
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
+ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
+ fdt_fixup_ethernet(blob, bd);
+#endif
+
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "timebase-frequency", (bd->bi_busfreq / 4), 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
+ "clock-frequency", gd->core_clk, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+ "bus-frequency", bd->bi_busfreq, 1);
+#ifdef CONFIG_QE
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+ "bus-frequency", gd->qe_clk, 1);
+ do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+ "brg-frequency", gd->brg_clk, 1);
+#endif
+
+#ifdef CFG_NS16550
+ do_fixup_by_compat_u32(blob, "ns16550",
+ "clock-frequency", bd->bi_busfreq, 1);
+#endif
+
+#ifdef CONFIG_CPM2
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
+ "current-speed", bd->bi_baudrate, 1);
+
+ do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
+ "clock-frequency", bd->bi_brgfreq, 1);
+#endif
+
+ fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}
+#endif /* CONFIG_OF_LIBFDT */
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
-#elif defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
+#include <fdt_support.h>
#endif
#include <asm/mpc8349_pci.h>
void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
- int err;
int tmp[2];
+ const char *path;
if (pci_num_buses < 1)
return;
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");
+ nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-
- if (pci_num_buses < 2)
- return;
-
- nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");
- if (nodeoffset >= 0) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- err = fdt_setprop(blob, nodeoffset, "bus-range",
- tmp, sizeof(tmp));
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- err = fdt_setprop(blob, nodeoffset, "clock-frequency",
- tmp, sizeof(tmp[0]));
- }
-}
-#elif CONFIG_OF_FLAT_TREE
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- u32 *p;
- int len;
-
- if (pci_num_buses < 1)
- return;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);
- if (p) {
- p[0] = pci_hose[0].first_busno;
- p[1] = pci_hose[0].last_busno;
- }
-
- if (pci_num_buses < 2)
- return;
-
- p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);
- if (p) {
- p[0] = pci_hose[1].first_busno;
- p[1] = pci_hose[1].last_busno;
+ path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
+
+ if (pci_num_buses < 2)
+ return;
+
+ path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
+ if (path) {
+ tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
+ tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
+ do_fixup_by_path(blob, path, "bus-range",
+ &tmp, sizeof(tmp), 1);
+
+ tmp[0] = cpu_to_be32(gd->pci_clk);
+ do_fixup_by_path(blob, path, "clock-frequency",
+ &tmp, sizeof(tmp[0]), 1);
+ }
}
}
-#endif /* CONFIG_OF_FLAT_TREE */
-
+#endif /* CONFIG_OF_LIBFDT */
#endif /* CONFIG_83XX_GENERIC_PCI */
/*
- * (C) Copyright 2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
*
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
if(spd.mem_type == SPD_MEMTYPE_DDR2) {
immap->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
}
+ udelay(50000);
#endif
/*
if (effective_data_rate == 266 || effective_data_rate == 333) {
cpo = 0x7; /* READ_LAT + 5/4 */
} else if (effective_data_rate == 400) {
- cpo = 0x9; /* READ_LAT + 7/4 */
+ cpo = 0x7; /* READ_LAT + 5/4 */
} else {
/* Automatic calibration */
cpo = 0x1f;
* SDRAM Cfg 2
*/
odt_cfg = 0;
+#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
if (odt_rd_cfg | odt_wr_cfg) {
odt_cfg = 0x2; /* ODT to IOs during reads */
}
+#endif
if (spd.mem_type == SPD_MEMTYPE_DDR2) {
ddr->sdram_cfg2 = (0
| (0 << 26) /* True DQS */
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
u32 lcrr;
u32 csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
u32 i2c1_clk;
#if !defined(CONFIG_MPC832X)
u32 i2c2_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ u32 tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ u32 sdhc_clk;
#endif
u32 enc_clk;
u32 lbiu_clk;
u32 qe_clk;
u32 brg_clk;
#endif
+#if defined(CONFIG_MPC837X)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ u32 sata_clk;
+#endif
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
return -1;
sccr = im->clk.sccr;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
case 0:
tsec1_clk = 0;
break;
default:
/* unkown SCCR_TSEC1CM value */
- return -4;
+ return -2;
}
switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
break;
default:
/* unkown SCCR_USBDRCM value */
- return -8;
+ return -3;
}
#endif
-#if defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
case 0:
tsec2_clk = 0;
break;
default:
/* unkown SCCR_TSEC2CM value */
- return -5;
+ return -4;
}
+#elif defined(CONFIG_MPC8313)
+ tsec2_clk = tsec1_clk;
- i2c1_clk = tsec2_clk;
+ if (!(sccr & SCCR_TSEC1ON))
+ tsec1_clk = 0;
+ if (!(sccr & SCCR_TSEC2ON))
+ tsec2_clk = 0;
+#endif
+#if defined(CONFIG_MPC834X)
switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
case 0:
usbmph_clk = 0;
break;
default:
/* unkown SCCR_USBMPHCM value */
- return -7;
+ return -5;
}
if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
* USB DR clock is not disabled then
* USB MPH & USB DR must have the same rate
*/
- return -9;
+ return -6;
+ }
+#endif
+ switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+ case 0:
+ enc_clk = 0;
+ break;
+ case 1:
+ enc_clk = csb_clk;
+ break;
+ case 2:
+ enc_clk = csb_clk / 2;
+ break;
+ case 3:
+ enc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_ENCCM value */
+ return -7;
}
-#elif defined(CONFIG_MPC831X)
- tsec2_clk = tsec1_clk;
- if (!(sccr & SCCR_TSEC1ON))
- tsec1_clk = 0;
- if (!(sccr & SCCR_TSEC2ON))
- tsec2_clk = 0;
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
+ case 0:
+ sdhc_clk = 0;
+ break;
+ case 1:
+ sdhc_clk = csb_clk;
+ break;
+ case 2:
+ sdhc_clk = csb_clk / 2;
+ break;
+ case 3:
+ sdhc_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SDHCCM value */
+ return -8;
+ }
+#endif
+#if defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
+ case 0:
+ tdm_clk = 0;
+ break;
+ case 1:
+ tdm_clk = csb_clk;
+ break;
+ case 2:
+ tdm_clk = csb_clk / 2;
+ break;
+ case 3:
+ tdm_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_TDMCM value */
+ return -8;
+ }
#endif
-#if !defined(CONFIG_MPC834X)
+#if defined(CONFIG_MPC834X)
+ i2c1_clk = tsec2_clk;
+#elif defined(CONFIG_MPC8360)
i2c1_clk = csb_clk;
+#elif defined(CONFIG_MPC832X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC831X)
+ i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC837X)
+ i2c1_clk = sdhc_clk;
#endif
#if !defined(CONFIG_MPC832X)
- i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
+ i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
#endif
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
+#if defined(CONFIG_MPC837X)
+ switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
case 0:
- enc_clk = 0;
+ pciexp1_clk = 0;
break;
case 1:
- enc_clk = csb_clk;
+ pciexp1_clk = csb_clk;
break;
case 2:
- enc_clk = csb_clk / 2;
+ pciexp1_clk = csb_clk / 2;
break;
case 3:
- enc_clk = csb_clk / 3;
+ pciexp1_clk = csb_clk / 3;
break;
default:
- /* unkown SCCR_ENCCM value */
- return -6;
+ /* unkown SCCR_PCIEXP1CM value */
+ return -9;
+ }
+
+ switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
+ case 0:
+ pciexp2_clk = 0;
+ break;
+ case 1:
+ pciexp2_clk = csb_clk;
+ break;
+ case 2:
+ pciexp2_clk = csb_clk / 2;
+ break;
+ case 3:
+ pciexp2_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_PCIEXP2CM value */
+ return -10;
}
+#endif
+
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
+ case 0:
+ sata_clk = 0;
+ break;
+ case 1:
+ sata_clk = csb_clk;
+ break;
+ case 2:
+ sata_clk = csb_clk / 2;
+ break;
+ case 3:
+ sata_clk = csb_clk / 3;
+ break;
+ default:
+ /* unkown SCCR_SATA1CM value */
+ return -11;
+ }
+#endif
lbiu_clk = csb_clk *
(1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
break;
default:
/* unknown lcrr */
- return -10;
+ return -12;
}
ddr_clk = csb_clk *
break;
default:
/* unkown core to csb ratio */
- return -12;
+ return -13;
}
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
#endif
gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
gd->tsec1_clk = tsec1_clk;
gd->tsec2_clk = tsec2_clk;
gd->usbdr_clk = usbdr_clk;
#endif
#if defined(CONFIG_MPC834X)
gd->usbmph_clk = usbmph_clk;
+#endif
+#if defined(CONFIG_MPC8315)
+ gd->tdm_clk = tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->sdhc_clk = sdhc_clk;
#endif
gd->core_clk = core_clk;
gd->i2c1_clk = i2c1_clk;
#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
gd->qe_clk = qe_clk;
gd->brg_clk = brg_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ gd->pciexp1_clk = pciexp1_clk;
+ gd->pciexp2_clk = pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ gd->sata_clk = sata_clk;
#endif
gd->pci_clk = pci_sync_in;
gd->cpu_clk = gd->core_clk;
#if !defined(CONFIG_MPC832X)
printf(" I2C2: %4d MHz\n", gd->i2c2_clk / 1000000);
#endif
-#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC8315)
+ printf(" TDM: %4d MHz\n", gd->tdm_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC837X)
+ printf(" SDHC: %4d MHz\n", gd->sdhc_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
printf(" TSEC1: %4d MHz\n", gd->tsec1_clk / 1000000);
printf(" TSEC2: %4d MHz\n", gd->tsec2_clk / 1000000);
printf(" USB DR: %4d MHz\n", gd->usbdr_clk / 1000000);
#endif
#if defined(CONFIG_MPC834X)
printf(" USB MPH: %4d MHz\n", gd->usbmph_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC837X)
+ printf(" PCIEXP1: %4d MHz\n", gd->pciexp1_clk / 1000000);
+ printf(" PCIEXP2: %4d MHz\n", gd->pciexp2_clk / 1000000);
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ printf(" SATA: %4d MHz\n", gd->sata_clk / 1000000);
#endif
return 0;
}
--- /dev/null
+Freescale MPC837xEMDS Board
+-----------------------------------------
+1. Board Switches and Jumpers
+1.0 There are four Dual-In-Line Packages(DIP) Switches on MPC837xEMDS board
+ For some reason, the HW designers describe the switch settings
+ in terms of 0 and 1, and then map that to physical switches where
+ the label "On" refers to logic 0 and "Off" is logic 1.
+
+ Switch bits are numbered 1 through, like, 4 6 8 or 10, but the
+ bits may contribute to signals that are numbered based at 0,
+ and some of those signals may be high-bit-number-0 too. Heed
+ well the names and labels and do not get confused.
+
+ "Off" == 1
+ "On" == 0
+
+ SW4[8] is the bit labled 8 on Switch 4.
+ SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
+ SW2[1:8]= 0000_0001 refers to bits labeled 1 through 7 is set as "On"
+ and bits labeled 8 is set as "Off".
+
+1.1 For the MPC837xEMDS Processor Board
+
+ First, make sure the board default setting is consistent with the
+ document shipped with your board. Then apply the following setting:
+ SW3[1-8]= 0011_0000 (BOOTSEQ, ROMLOC setting)
+ SW4[1-8]= 0000_0110 (core PLL setting)
+ SW5[1-8]= 1001_1000 (system PLL, boot up from low end of flash)
+ SW6[1-8]= 0000_1000 (HRCW is read from NOR FLASH)
+ SW7[1-8]= 0110_1101 (TSEC1/2 interface setting - RGMII)
+ J3 2-3, TSEC1 LVDD1 with 2.5V
+ J6 2-3, TSEC2 LVDD2 with 2.5V
+ J9 2-3, CLKIN from osc on board
+ J10 removed, CS0 connect to NOR flash; when mounted, CS0 connect to NAND
+ J11 removed, Hardware Reset Configuration Word load from FLASH(NOR or NAND)
+ mounted, HRCW load from BCSR.
+
+ on board Oscillator: 66M
+
+2. Memory Map
+
+2.1. The memory map should look pretty much like this:
+
+ 0x0000_0000 0x7fff_ffff DDR 2G
+ 0x8000_0000 0x8fff_ffff PCI MEM prefetch 256M
+ 0x9000_0000 0x9fff_ffff PCI MEM non-prefetch 256M
+ 0xc000_0000 0xdfff_ffff Empty 512M
+ 0xe000_0000 0xe00f_ffff Int Mem Reg Space 1M
+ 0xe010_0000 0xe02f_ffff Empty 2M
+ 0xe030_0000 0xe03f_ffff PCI IO 1M
+ 0xe040_0000 0xe05f_ffff Empty 2M
+ 0xe060_0000 0xe060_8000 NAND Flash 32K
+ 0xf400_0000 0xf7ff_ffff Empty 64M
+ 0xf800_0000 0xf800_7fff BCSR on CS1 32K
+ 0xfe00_0000 0xffff_ffff NOR Flash on CS0 32M
+
+3. Definitions
+
+3.1 Explanation of NEW definitions in:
+
+ include/configs/MPC837XEMDS.h
+
+ CONFIG_MPC83XX MPC83xx family for both MPC837x and MPC8360
+ CONFIG_MPC837X MPC837x specific
+ CONFIG_MPC837XEMDS MPC837XEMDS board specific
+
+4. Compilation
+
+ Assuming you're using BASH shell:
+
+ export CROSS_COMPILE=your-cross-compile-prefix
+ cd u-boot
+ make distclean
+ make MPC837XEMDS_config
+ make
+
+5. Downloading and Flashing Images
+
+5.0 Download over serial line using Kermit:
+
+ loadb
+ [Drop to kermit:
+ ^\c
+ send <u-boot-bin-image>
+ c
+ ]
+
+
+ Or via tftp:
+
+ tftp 40000 u-boot.bin
+
+5.1 Reflash U-boot Image using U-boot
+
+ tftp 40000 u-boot.bin
+ protect off fe000000 fe1fffff
+ erase fe000000 fe1fffff
+
+ cp.b 40000 fe000000 xxxx
+
+You have to supply the correct byte count with 'xxxx' from the TFTP result log.
+
+6. Notes
+ 1) The console baudrate for MPC837XEMDS is 115200bps.
return MIIM_CIS8204_EPHYCON_INIT;
}
+uint mii_m88e1111s_setmode(uint mii_reg, struct tsec_private *priv)
+{
+ uint mii_data = read_phy_reg(priv, mii_reg);
+
+ if (priv->flags & TSEC_REDUCED)
+ mii_data = (mii_data & 0xfff0) | 0x000b;
+ return mii_data;
+}
+
/* Initialized required registers to appropriate values, zeroing
* those we don't care about (unless zero is bad, in which case,
* choose a more appropriate value)
(struct phy_cmd[]){ /* config */
/* Reset and configure the PHY */
{MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
+ {0x1b, 0x848f, &mii_m88e1111s_setmode},
{0x14, 0x0cd2, NULL}, /* Delay RGMII TX and RX */
{MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
{MIIM_ANAR, MIIM_ANAR_INIT, NULL},
};
#endif
+#ifdef CONFIG_UEC_ETH3
+static uec_info_t eth3_uec_info = {
+ .uf_info = {
+ .ucc_num = CFG_UEC3_UCC_NUM,
+ .rx_clock = CFG_UEC3_RX_CLK,
+ .tx_clock = CFG_UEC3_TX_CLK,
+ .eth_type = CFG_UEC3_ETH_TYPE,
+ },
+ .num_threads_tx = UEC_NUM_OF_THREADS_4,
+ .num_threads_rx = UEC_NUM_OF_THREADS_4,
+ .riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
+ .tx_bd_ring_len = 16,
+ .rx_bd_ring_len = 16,
+ .phy_address = CFG_UEC3_PHY_ADDR,
+ .enet_interface = CFG_UEC3_INTERFACE_MODE,
+};
+#endif
+
static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
{
uec_t *uec_regs;
} else if (index == 1) {
#ifdef CONFIG_UEC_ETH2
uec_info = ð2_uec_info;
+#endif
+ } else if (index == 2) {
+#ifdef CONFIG_UEC_ETH3
+ uec_info = ð3_uec_info;
#endif
} else {
printf("%s: index is illegal.\n", __FUNCTION__);
#if defined(CONFIG_MPC83XX)
/* There are other clocks in the MPC83XX */
u32 csb_clk;
-#if defined (CONFIG_MPC834X) || defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC834X) || defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
u32 tsec1_clk;
u32 tsec2_clk;
u32 usbdr_clk;
#if defined (CONFIG_MPC834X)
u32 usbmph_clk;
#endif /* CONFIG_MPC834X */
+#if defined(CONFIG_MPC815)
+ u32 tdm_clk;
+#endif
+#if defined(CONFIG_MPC837X)
+ u32 sdhc_clk;
+#endif
u32 core_clk;
u32 i2c1_clk;
u32 i2c2_clk;
u32 lclk_clk;
u32 ddr_clk;
u32 pci_clk;
+#if defined(CONFIG_MPC837X)
+ u32 pciexp1_clk;
+ u32 pciexp2_clk;
+#endif
+#if defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+ u32 sata_clk;
+#endif
#if defined(CONFIG_MPC8360)
u32 ddr_sec_clk;
#endif /* CONFIG_MPC8360 */
/*
- * (C) Copyright 2004-2006 Freescale Semiconductor, Inc.
+ * (C) Copyright 2004-2007 Freescale Semiconductor, Inc.
*
* MPC83xx Internal Memory Map
*
u8 res6[0x0C];
u32 ddrcdr; /* DDR Control Driver Register */
u32 ddrdsr; /* DDR Debug Status Register */
- u8 res7[0xD0];
+ u32 obir; /* Output Buffer Impedance Register */
+ u8 res7[0xCC];
} sysconf83xx_t;
/*
u8 fixme[0x10000];
} security83xx_t;
+/*
+ * PCI Express
+ */
+typedef struct pex83xx {
+ u8 fixme[0x1000];
+} pex83xx_t;
+
+/*
+ * SATA
+ */
+typedef struct sata83xx {
+ u8 fixme[0x1000];
+} sata83xx_t;
+
+/*
+ * eSDHC
+ */
+typedef struct sdhc83xx {
+ u8 fixme[0x1000];
+} sdhc83xx_t;
+
+/*
+ * SerDes
+ */
+typedef struct serdes83xx {
+ u8 fixme[0x100];
+} serdes83xx_t;
+
+/*
+ * On Chip ROM
+ */
+typedef struct rom83xx {
+ u8 mem[0x10000];
+} rom83xx_t;
+
+/*
+ * TDM
+ */
+typedef struct tdm83xx {
+ u8 fixme[0x200];
+} tdm83xx_t;
+
+/*
+ * TDM DMAC
+ */
+typedef struct tdmdmac83xx {
+ u8 fixme[0x2000];
+} tdmdmac83xx_t;
+
#if defined(CONFIG_MPC834X)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
u8 res7[0xC0000];
} immap_t;
-#elif defined(CONFIG_MPC831X)
+#elif defined(CONFIG_MPC8313)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
u8 res7[0xC0000];
} immap_t;
+#elif defined(CONFIG_MPC8315)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[1]; /* General purpose I/O module */
+ u8 res0[0x1300];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi83xx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0xa00];
+ pex83xx_t pciexp[2]; /* PCI Express Controller */
+ u8 res6[0xb000];
+ tdm83xx_t tdm; /* TDM Controller */
+ u8 res7[0x1e00];
+ sata83xx_t sata[2]; /* SATA Controller */
+ u8 res8[0x9000];
+ usb83xx_t usb[1]; /* USB DR Controller */
+ tsec83xx_t tsec[2];
+ u8 res9[0x6000];
+ tdmdmac83xx_t tdmdmac; /* TDM DMAC */
+ u8 res10[0x2000];
+ security83xx_t security;
+ u8 res11[0xA3000];
+ serdes83xx_t serdes[1]; /* SerDes Registers */
+ u8 res12[0x1CF00];
+} immap_t;
+
+#elif defined(CONFIG_MPC837X)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[2]; /* General purpose I/O module */
+ u8 res0[0x1200];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi83xx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0xa00];
+ pex83xx_t pciexp[2]; /* PCI Express Controller */
+ u8 res6[0xd000];
+ sata83xx_t sata[4]; /* SATA Controller */
+ u8 res7[0x7000];
+ usb83xx_t usb[1]; /* USB DR Controller */
+ tsec83xx_t tsec[2];
+ u8 res8[0x8000];
+ sdhc83xx_t sdhc; /* SDHC Controller */
+ u8 res9[0x1000];
+ security83xx_t security;
+ u8 res10[0xA3000];
+ serdes83xx_t serdes[2]; /* SerDes Registers */
+ u8 res11[0xCE00];
+ rom83xx_t rom; /* On Chip ROM */
+} immap_t;
+
#elif defined(CONFIG_MPC8360)
typedef struct immap {
sysconf83xx_t sysconf; /* System configuration */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8313@0"
-#define OF_SOC "soc8313@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8313@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* Serial Port
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#undef CFG_RAMBOOT
#endif
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8323@0"
-#define OF_SOC "soc8323@e0000000"
-#define OF_QE "qe@e0100000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
#undef CFG_RAMBOOT
#endif
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8323@0"
-#define OF_SOC "soc8323@e0000000"
-#define OF_QE "qe@e0100000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8323@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8349@0"
-#define OF_SOC "soc8349@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
*/
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
#define CFG_ENV_SIZE 0x2000
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
-#define CONFIG_OF_BOARD_SETUP
-
-#define OF_CPU "PowerPC,8349@0"
-#define OF_SOC "soc8349@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/*
* PCI
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
#define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + (4 * CFG_ENV_SECT_SIZE))
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH /* Flash is not usable now */
#undef CFG_RAMBOOT
#endif
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT 1
-#undef CONFIG_OF_FLAT_TREE
#define CONFIG_OF_BOARD_SETUP 1
-#define CONFIG_OF_HAS_BD_T 1
-#define CONFIG_OF_HAS_UBOOT_ENV 1
-
-#define OF_CPU "PowerPC,8360@0"
-#define OF_SOC "soc8360@e0000000"
-#define OF_QE "qe@e0100000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8360@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support */
#ifndef CFG_RAMBOOT
#define CFG_ENV_IS_IN_FLASH 1
- #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
- #define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000
#define CFG_ENV_SIZE 0x2000
#else
#define CFG_NO_FLASH 1 /* Flash is not usable now */
--- /dev/null
+/*
+ * Copyright (C) 2007 Freescale Semiconductor, Inc.
+ * Dave Liu <daveliu@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300 1 /* E300 family */
+#define CONFIG_MPC83XX 1 /* MPC83XX family */
+#define CONFIG_MPC837X 1 /* MPC837X CPU specific */
+#define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */
+
+/*
+ * System Clock Setup
+ */
+#ifdef CONFIG_PCISLAVE
+#define CONFIG_83XX_PCICLK 66000000 /* in HZ */
+#else
+#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#define CONFIG_SYS_CLK_FREQ 66000000
+#endif
+
+/*
+ * Hardware Reset Configuration Word
+ * if CLKIN is 66MHz, then
+ * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz
+ */
+#define CFG_HRCW_LOW (\
+ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+ HRCWL_DDR_TO_SCB_CLK_1X1 |\
+ HRCWL_SVCOD_DIV_2 |\
+ HRCWL_CSB_TO_CLKIN_6X1 |\
+ HRCWL_CORE_TO_CSB_1_5X1)
+
+#ifdef CONFIG_PCISLAVE
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_AGENT |\
+ HRCWH_PCI1_ARBITER_DISABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0XFFF00100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LDP_CLEAR)
+#else
+#define CFG_HRCW_HIGH (\
+ HRCWH_PCI_HOST |\
+ HRCWH_PCI1_ARBITER_ENABLE |\
+ HRCWH_CORE_ENABLE |\
+ HRCWH_FROM_0X00000100 |\
+ HRCWH_BOOTSEQ_DISABLE |\
+ HRCWH_SW_WATCHDOG_DISABLE |\
+ HRCWH_ROM_LOC_LOCAL_16BIT |\
+ HRCWH_RL_EXT_LEGACY |\
+ HRCWH_TSEC1M_IN_RGMII |\
+ HRCWH_TSEC2M_IN_RGMII |\
+ HRCWH_BIG_ENDIAN |\
+ HRCWH_LDP_CLEAR)
+#endif
+
+/*
+ * eTSEC Clock Config
+ */
+#define CFG_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */
+#define CFG_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */
+
+/*
+ * System IO Config
+ */
+#define CFG_SICRH 0x00000000
+#define CFG_SICRL 0x00000000
+
+/*
+ * Output Buffer Impedance
+ */
+#define CFG_OBIR 0x31100000
+
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */
+#define CONFIG_BOARD_EARLY_INIT_R
+
+/*
+ * IMMR new address
+ */
+#define CFG_IMMR 0xE0000000
+
+/*
+ * DDR Setup
+ */
+#define CFG_DDR_BASE 0x00000000 /* DDR is system memory */
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05
+#define CFG_83XX_DDR_USES_CS0
+#define CFG_DDRCDR_VALUE 0x80080001 /* ODT 150ohm on SoC */
+
+#undef CONFIG_DDR_ECC /* support DDR ECC function */
+#undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */
+
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */
+#define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */
+
+#if defined(CONFIG_SPD_EEPROM)
+#define SPD_EEPROM_ADDRESS 0x51 /* I2C address of DDR SODIMM SPD */
+#else
+/*
+ * Manually set up DDR parameters
+ * WHITE ELECTRONIC DESGGNS - W3HG64M72EEU403PD4 SO-DIMM
+ * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5
+ */
+#define CFG_DDR_SIZE 512 /* MB */
+#define CFG_DDR_CS0_BNDS 0x0000001f
+#define CFG_DDR_CS0_CONFIG ( CSCONFIG_EN \
+ | 0x00010000 /* ODT_WR to CSn */ \
+ | CSCONFIG_ROW_BIT_14 | CSCONFIG_COL_BIT_10 )
+ /* 0x80010202 */
+#define CFG_DDR_TIMING_3 0x00000000
+#define CFG_DDR_TIMING_0 ( ( 0 << TIMING_CFG0_RWT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_RRT_SHIFT ) \
+ | ( 0 << TIMING_CFG0_WWT_SHIFT ) \
+ | ( 6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT ) \
+ | ( 8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT ) \
+ | ( 2 << TIMING_CFG0_MRS_CYC_SHIFT ) )
+ /* 0x00620802 */
+#define CFG_DDR_TIMING_1 ( ( 3 << TIMING_CFG1_PRETOACT_SHIFT ) \
+ | ( 9 << TIMING_CFG1_ACTTOPRE_SHIFT ) \
+ | ( 3 << TIMING_CFG1_ACTTORW_SHIFT ) \
+ | ( 5 << TIMING_CFG1_CASLAT_SHIFT ) \
+ | (13 << TIMING_CFG1_REFREC_SHIFT ) \
+ | ( 3 << TIMING_CFG1_WRREC_SHIFT ) \
+ | ( 2 << TIMING_CFG1_ACTTOACT_SHIFT ) \
+ | ( 2 << TIMING_CFG1_WRTORD_SHIFT ) )
+ /* 0x3935d322 */
+#define CFG_DDR_TIMING_2 ( ( 2 << TIMING_CFG2_ADD_LAT_SHIFT ) \
+ | ( 6 << TIMING_CFG2_CPO_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT ) \
+ | ( 4 << TIMING_CFG2_RD_TO_PRE_SHIFT ) \
+ | ( 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT ) \
+ | ( 3 << TIMING_CFG2_CKE_PLS_SHIFT ) \
+ | ( 8 << TIMING_CFG2_FOUR_ACT_SHIFT) )
+ /* 0x231088c8 */
+#define CFG_DDR_INTERVAL ( ( 0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT ) \
+ | ( 0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT ) )
+ /* 0x03E00100 */
+#define CFG_DDR_SDRAM_CFG 0x43000000
+#define CFG_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */
+#define CFG_DDR_MODE ( ( 0x0450 << SDRAM_MODE_ESD_SHIFT ) \
+ | ( 0x1432 << SDRAM_MODE_SD_SHIFT ) )
+ /* ODT 150ohm CL=3, AL=2 on SDRAM */
+#define CFG_DDR_MODE2 0x00000000
+#endif
+
+/*
+ * Memory test
+ */
+#undef CFG_DRAM_TEST /* memory test, takes time */
+#define CFG_MEMTEST_START 0x00040000 /* memtest region */
+#define CFG_MEMTEST_END 0x00140000
+
+/*
+ * The reserved memory
+ */
+#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef CFG_RAMBOOT
+#endif
+
+/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
+
+/*
+ * Initial RAM Base Address Setup
+ */
+#define CFG_INIT_RAM_LOCK 1
+#define CFG_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */
+#define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM */
+#define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8)
+#define CFG_LBC_LBCR 0x00000000
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI /* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER /* use the CFI driver */
+#define CFG_FLASH_BASE 0xFE000000 /* FLASH base address */
+#define CFG_FLASH_SIZE 32 /* max FLASH size is 32M */
+
+#define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */
+
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | /* Flash Base address */ \
+ (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
+ BR_V) /* valid */
+#define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+ OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+ OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
+#define CFG_MAX_FLASH_SECT 256 /* max sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
+
+/*
+ * BCSR on the Local Bus
+ */
+#define CFG_BCSR 0xF8000000
+#define CFG_LBLAWBAR1_PRELIM CFG_BCSR /* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */
+
+#define CFG_BR1_PRELIM (CFG_BCSR | 0x00000801) /* Port size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM 0xFFFFE9f7 /* length 32K */
+
+/*
+ * NAND Flash on the Local Bus
+ */
+#define CFG_NAND_BASE 0xE0600000 /* 0xE0600000 */
+#define CFG_BR3_PRELIM ( CFG_NAND_BASE \
+ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
+ | BR_PS_8 /* Port Size = 8 bit */ \
+ | BR_MS_FCM /* MSEL = FCM */ \
+ | BR_V ) /* valid */
+#define CFG_OR3_PRELIM ( 0xFFFF8000 /* length 32K */ \
+ | OR_FCM_CSCT \
+ | OR_FCM_CST \
+ | OR_FCM_CHT \
+ | OR_FCM_SCY_1 \
+ | OR_FCM_TRLX \
+ | OR_FCM_EHTR )
+ /* 0xFFFF8396 */
+
+#define CFG_LBLAWBAR3_PRELIM CFG_NAND_BASE
+#define CFG_LBLAWAR3_PRELIM 0x8000000E /* 32KB */
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX 1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE 1
+#define CFG_NS16550_CLK get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CFG_NS16550_COM1 (CFG_IMMR+0x4500)
+#define CFG_NS16550_COM2 (CFG_IMMR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* Pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT 1
+#define CONFIG_OF_BOARD_SETUP 1
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
+
+/* I2C */
+#define CONFIG_HARD_I2C /* I2C with hardware support */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#define CONFIG_FSL_I2C
+#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
+#define CFG_I2C_SLAVE 0x7F
+#define CFG_I2C_NOPROBES {0x51} /* Don't probe these addrs */
+#define CFG_I2C_OFFSET 0x3000
+#define CFG_I2C2_OFFSET 0x3100
+
+/*
+ * Config on-board RTC
+ */
+#define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */
+#define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI_MEM_BASE 0x80000000
+#define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BASE
+#define CFG_PCI_MEM_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_MMIO_BASE 0x90000000
+#define CFG_PCI_MMIO_PHYS CFG_PCI_MMIO_BASE
+#define CFG_PCI_MMIO_SIZE 0x10000000 /* 256M */
+#define CFG_PCI_IO_BASE 0xE0300000
+#define CFG_PCI_IO_PHYS 0xE0300000
+#define CFG_PCI_IO_SIZE 0x100000 /* 1M */
+
+#define CFG_PCI_SLV_MEM_LOCAL CFG_SDRAM_BASE
+#define CFG_PCI_SLV_MEM_BUS 0x00000000
+#define CFG_PCI_SLV_MEM_SIZE 0x80000000
+
+#ifdef CONFIG_PCI
+#define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */
+#define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
+#endif /* CONFIG_PCI */
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI 1
+#endif
+
+/*
+ * TSEC
+ */
+#define CONFIG_TSEC_ENET /* TSEC ethernet support */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMR+CFG_TSEC2_OFFSET)
+
+/*
+ * TSEC ethernet configuration
+ */
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_TSEC1 1
+#define CONFIG_TSEC1_NAME "eTSEC0"
+#define CONFIG_TSEC2 1
+#define CONFIG_TSEC2_NAME "eTSEC1"
+#define TSEC1_PHY_ADDR 2
+#define TSEC2_PHY_ADDR 3
+#define TSEC1_PHYIDX 0
+#define TSEC2_PHYIDX 0
+#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME "eTSEC1"
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+ #define CFG_ENV_IS_IN_FLASH 1
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+ #define CFG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
+ #define CFG_ENV_SIZE 0x2000
+#else
+ #define CFG_NO_FLASH 1 /* Flash is not usable now */
+ #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */
+ #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000)
+ #define CFG_ENV_SIZE 0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+
+#if defined(CONFIG_PCI)
+ #define CONFIG_CMD_PCI
+#endif
+
+#if defined(CFG_RAMBOOT)
+ #undef CONFIG_CMD_ENV
+ #undef CONFIG_CMD_LOADS
+#endif
+
+#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_LOAD_ADDR 0x2000000 /* default load address */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if defined(CONFIG_CMD_KGDB)
+ #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+ #define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Core HID Setup
+ */
+#define CFG_HID0_INIT 0x000000000
+#define CFG_HID0_FINAL HID0_ENABLE_MACHINE_CHECK
+#define CFG_HID2 HID2_HBE
+
+/*
+ * Cache Config
+ */
+#define CFG_DCACHE_SIZE 32768
+#define CFG_CACHELINE_SIZE 32
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value */
+#endif
+
+/*
+ * MMU Setup
+ */
+
+/* DDR: cache cacheable */
+#define CFG_SDRAM_LOWER CFG_SDRAM_BASE
+#define CFG_SDRAM_UPPER (CFG_SDRAM_BASE + 0x10000000)
+
+#define CFG_IBAT0L (CFG_SDRAM_LOWER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U (CFG_SDRAM_LOWER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT0L CFG_IBAT0L
+#define CFG_DBAT0U CFG_IBAT0U
+
+#define CFG_IBAT1L (CFG_SDRAM_UPPER | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U (CFG_SDRAM_UPPER | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT1L CFG_IBAT1L
+#define CFG_DBAT1U CFG_IBAT1U
+
+/* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */
+#define CFG_IBAT2L (CFG_IMMR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U (CFG_IMMR | BATU_BL_8M | BATU_VS | BATU_VP)
+#define CFG_DBAT2L CFG_IBAT2L
+#define CFG_DBAT2U CFG_IBAT2U
+
+/* BCSR: cache-inhibit and guarded */
+#define CFG_IBAT3L (CFG_BCSR | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT3U (CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT3L CFG_IBAT3L
+#define CFG_DBAT3U CFG_IBAT3U
+
+/* FLASH: icache cacheable, but dcache-inhibit and guarded */
+#define CFG_IBAT4L (CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U (CFG_FLASH_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_DBAT4L (CFG_FLASH_BASE | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_DBAT4U CFG_IBAT4U
+
+/* Stack in dcache: cacheable, no memory coherence */
+#define CFG_IBAT5L (CFG_INIT_RAM_ADDR | BATL_PP_10)
+#define CFG_IBAT5U (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+#define CFG_DBAT5L CFG_IBAT5L
+#define CFG_DBAT5U CFG_IBAT5U
+
+#ifdef CONFIG_PCI
+/* PCI MEM space: cacheable */
+#define CFG_IBAT6L (CFG_PCI_MEM_PHYS | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U (CFG_PCI_MEM_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+/* PCI MMIO space: cache-inhibit and guarded */
+#define CFG_IBAT7L (CFG_PCI_MMIO_PHYS | BATL_PP_10 | \
+ BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT7U (CFG_PCI_MMIO_PHYS | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#else
+#define CFG_IBAT6L (0)
+#define CFG_IBAT6U (0)
+#define CFG_IBAT7L (0)
+#define CFG_IBAT7U (0)
+#define CFG_DBAT6L CFG_IBAT6L
+#define CFG_DBAT6U CFG_IBAT6U
+#define CFG_DBAT7L CFG_IBAT7L
+#define CFG_DBAT7U CFG_IBAT7U
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_HAS_ETH0
+#define CONFIG_ETHADDR 00:E0:0C:00:83:79
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR 00:E0:0C:00:83:78
+#endif
+
+#define CONFIG_BAUDRATE 115200
+
+#define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
+#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "consoledev=ttyS0\0" \
+ "ramdiskaddr=1000000\0" \
+ "ramdiskfile=ramfs.83xx\0" \
+ "fdtaddr=400000\0" \
+ "fdtfile=mpc837xemds.dtb\0" \
+ ""
+
+#define CONFIG_NFSBOOTCOMMAND \
+ "setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$serverip:$rootpath " \
+ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND \
+ "setenv bootargs root=/dev/ram rw " \
+ "console=$consoledev,$baudrate $othbootargs;" \
+ "tftp $ramdiskaddr $ramdiskfile;" \
+ "tftp $loadaddr $bootfile;" \
+ "tftp $fdtaddr $fdtfile;" \
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+
+#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
+
+#endif /* __CONFIG_H */
#endif
/* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE 1
+#define CONFIG_OF_LIBFDT 1
#define CONFIG_OF_BOARD_SETUP 1
-
-#define OF_CPU "PowerPC,8349@0"
-#define OF_SOC "soc8349@e0000000"
-#define OF_TBCLK (bd->bi_busfreq / 4)
-#define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500"
+#define CONFIG_OF_STDOUT_VIA_ALIAS 1
/* I2C */
#define CONFIG_HARD_I2C /* I2C with hardware support*/
#define CONFIG_CMD_PING
#if defined(CONFIG_PCI)
- #define CONFG_CMD_PCI
+ #define CONFIG_CMD_PCI
#endif
#if defined(CFG_RAMBOOT)
/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
#define SPR_8321E_REV11 0x80660011
#define SPR_8321_REV11 0x80670011
-#define SPR_8311_REV10 0x80B30010
-#define SPR_8311E_REV10 0x80B20010
-#define SPR_8313_REV10 0x80B10010
#define SPR_8313E_REV10 0x80B00010
+#define SPR_8313_REV10 0x80B10010
+#define SPR_8311E_REV10 0x80B20010
+#define SPR_8311_REV10 0x80B30010
+#define SPR_8315E_REV10 0x80B40010
+#define SPR_8315_REV10 0x80B50010
+#define SPR_8314E_REV10 0x80B60010
+#define SPR_8314_REV10 0x80B70010
+
+#define SPR_8379E_REV10 0x80C20010
+#define SPR_8379_REV10 0x80C30010
+#define SPR_8378E_REV10 0x80C40010
+#define SPR_8378_REV10 0x80C50010
+#define SPR_8377E_REV10 0x80C60010
+#define SPR_8377_REV10 0x80C70010
/* SPCR - System Priority Configuration Register
*/
#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */
#define SPCR_TSEC2EP_SHIFT (31-31)
-#elif defined(CONFIG_MPC831X)
-/* SPCR bits - MPC831x specific */
+#elif defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+/* SPCR bits - MPC831x and MPC837x specific */
#define SPCR_TSECDP 0x00003000 /* TSEC data priority */
#define SPCR_TSECDP_SHIFT (31-19)
#define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */
#define SICRL_URT_CTPR 0x06000000
#define SICRL_IRQ_CTPR 0x00C00000
-#elif defined(CONFIG_MPC831X)
-/* SICRL bits - MPC831x specific */
+#elif defined(CONFIG_MPC8313)
+/* SICRL bits - MPC8313 specific */
#define SICRL_LBC 0x30000000
#define SICRL_UART 0x0C000000
#define SICRL_SPI_A 0x03000000
#define SICRL_ETSEC1_A 0x0000000C
#define SICRL_ETSEC2_A 0x00000003
-/* SICRH bits - MPC831x specific */
+/* SICRH bits - MPC8313 specific */
#define SICRH_INTR_A 0x02000000
#define SICRH_INTR_B 0x00C00000
#define SICRH_IIC 0x00300000
#define SICRH_TSOBI1 0x00000002
#define SICRH_TSOBI2 0x00000001
+#elif defined(CONFIG_MPC8315)
+/* SICRL bits - MPC8315 specific */
+#define SICRL_DMA_CH0 0xc0000000
+#define SICRL_DMA_SPI 0x30000000
+#define SICRL_UART 0x0c000000
+#define SICRL_IRQ4 0x02000000
+#define SICRL_IRQ5 0x01800000
+#define SICRL_IRQ6_7 0x00400000
+#define SICRL_IIC1 0x00300000
+#define SICRL_TDM 0x000c0000
+#define SICRL_TDM_SHARED 0x00030000
+#define SICRL_PCI_A 0x0000c000
+#define SICRL_ELBC_A 0x00003000
+#define SICRL_ETSEC1_A 0x000000c0
+#define SICRL_ETSEC1_B 0x00000030
+#define SICRL_ETSEC1_C 0x0000000c
+#define SICRL_TSEXPOBI 0x00000001
+
+/* SICRH bits - MPC8315 specific */
+#define SICRH_GPIO_0 0xc0000000
+#define SICRH_GPIO_1 0x30000000
+#define SICRH_GPIO_2 0x0c000000
+#define SICRH_GPIO_3 0x03000000
+#define SICRH_GPIO_4 0x00c00000
+#define SICRH_GPIO_5 0x00300000
+#define SICRH_GPIO_6 0x000c0000
+#define SICRH_GPIO_7 0x00030000
+#define SICRH_GPIO_8 0x0000c000
+#define SICRH_GPIO_9 0x00003000
+#define SICRH_GPIO_10 0x00000c00
+#define SICRH_GPIO_11 0x00000300
+#define SICRH_ETSEC2_A 0x000000c0
+#define SICRH_TSOBI1 0x00000002
+#define SICRH_TSOBI2 0x00000001
+
+#elif defined(CONFIG_MPC837X)
+/* SICRL bits - MPC837x specific */
+#define SICRL_USB_A 0xC0000000
+#define SICRL_USB_B 0x30000000
+#define SICRL_UART 0x0C000000
+#define SICRL_GPIO_A 0x02000000
+#define SICRL_GPIO_B 0x01000000
+#define SICRL_GPIO_C 0x00800000
+#define SICRL_GPIO_D 0x00400000
+#define SICRL_GPIO_E 0x00200000
+#define SICRL_GPIO_F 0x00180000
+#define SICRL_GPIO_G 0x00040000
+#define SICRL_GPIO_H 0x00020000
+#define SICRL_GPIO_I 0x00010000
+#define SICRL_GPIO_J 0x00008000
+#define SICRL_GPIO_K 0x00004000
+#define SICRL_GPIO_L 0x00003000
+#define SICRL_DMA_A 0x00000800
+#define SICRL_DMA_B 0x00000400
+#define SICRL_DMA_C 0x00000200
+#define SICRL_DMA_D 0x00000100
+#define SICRL_DMA_E 0x00000080
+#define SICRL_DMA_F 0x00000040
+#define SICRL_DMA_G 0x00000020
+#define SICRL_DMA_H 0x00000010
+#define SICRL_DMA_I 0x00000008
+#define SICRL_DMA_J 0x00000004
+#define SICRL_LDP_A 0x00000002
+#define SICRL_LDP_B 0x00000001
+
+/* SICRH bits - MPC837x specific */
+#define SICRH_DDR 0x80000000
+#define SICRH_TSEC1_A 0x10000000
+#define SICRH_TSEC1_B 0x08000000
+#define SICRH_TSEC2_A 0x00400000
+#define SICRH_TSEC2_B 0x00200000
+#define SICRH_TSEC2_C 0x00100000
+#define SICRH_TSEC2_D 0x00080000
+#define SICRH_TSEC2_E 0x00040000
+#define SICRH_TMR 0x00010000
+#define SICRH_GPIO2_A 0x00008000
+#define SICRH_GPIO2_B 0x00004000
+#define SICRH_GPIO2_C 0x00002000
+#define SICRH_GPIO2_D 0x00001000
+#define SICRH_GPIO2_E 0x00000C00
+#define SICRH_GPIO2_F 0x00000300
+#define SICRH_GPIO2_G 0x000000C0
+#define SICRH_GPIO2_H 0x00000030
+#define SICRH_SPI 0x00000003
#endif
/* SWCRR - System Watchdog Control Register
#define HRCWL_CE_TO_PLL_1X29 0x0000001D
#define HRCWL_CE_TO_PLL_1X30 0x0000001E
#define HRCWL_CE_TO_PLL_1X31 0x0000001F
+
+#elif defined(CONFIG_MPC837X) || defined(CONFIG_MPC8315)
+#define HRCWL_SVCOD 0x30000000
+#define HRCWL_SVCOD_SHIFT 28
+#define HRCWL_SVCOD_DIV_4 0x00000000
+#define HRCWL_SVCOD_DIV_8 0x10000000
+#define HRCWL_SVCOD_DIV_2 0x20000000
+#define HRCWL_SVCOD_DIV_1 0x30000000
#endif
/* HRCWH - Hardware Reset Configuration Word High
#if defined(CONFIG_MPC834X)
#define HRCWH_ROM_LOC_PCI2 0x00200000
#endif
+#if defined(CONIFG_MPC837X)
+#define HRCWH_ROM_LOC_ON_CHIP_ROM 0x00300000
+#endif
#define HRCWH_ROM_LOC_LOCAL_8BIT 0x00500000
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
-#if defined(CONFIG_MPC831X)
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000
#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
/* RSR - Reset Status Register
*/
+#if defined(CONFIG_MPC831X) || defined(CONFIG_MPC837X)
+#define RSR_RSTSRC 0xF0000000 /* Reset source */
+#define RSR_RSTSRC_SHIFT 28
+#else
#define RSR_RSTSRC 0xE0000000 /* Reset source */
#define RSR_RSTSRC_SHIFT 29
+#endif
#define RSR_BSF 0x00010000 /* Boot seq. fail */
#define RSR_BSF_SHIFT 16
#define RSR_SWSR 0x00002000 /* software soft reset */
#define SCCR_PCICM 0x00010000
#define SCCR_PCICM_SHIFT 16
-/* SCCR bits - MPC8349 specific */
-#ifdef CONFIG_MPC834X
+#if defined(CONFIG_MPC834X)
+/* SCCR bits - MPC834x specific */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
#define SCCR_TSEC1CM_0 0x00000000
#define SCCR_TSEC2CM_2 0x20000000
#define SCCR_TSEC2CM_3 0x30000000
-#elif defined(CONFIG_MPC831X)
+/* The MPH must have the same clock ratio as DR, unless its clock disabled */
+#define SCCR_USBMPHCM 0x00c00000
+#define SCCR_USBMPHCM_SHIFT 22
+#define SCCR_USBDRCM 0x00300000
+#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBCM 0x00f00000
+#define SCCR_USBCM_SHIFT 20
+#define SCCR_USBCM_0 0x00000000
+#define SCCR_USBCM_1 0x00500000
+#define SCCR_USBCM_2 0x00A00000
+#define SCCR_USBCM_3 0x00F00000
+
+#elif defined(CONFIG_MPC8313)
/* TSEC1 bits are for TSEC2 as well */
#define SCCR_TSEC1CM 0xc0000000
#define SCCR_TSEC1CM_SHIFT 30
#define SCCR_TSEC2ON 0x10000000
#define SCCR_TSEC2ON_SHIFT 28
-#endif
+#define SCCR_USBDRCM 0x00300000
+#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00100000
+#define SCCR_USBDRCM_2 0x00200000
+#define SCCR_USBDRCM_3 0x00300000
+
+#elif defined(CONFIG_MPC8315)
+/* SCCR bits - MPC8315 specific */
+#define SCCR_TSEC1CM 0xc0000000
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_0 0x00000000
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
+
+#define SCCR_TSEC2CM 0x30000000
+#define SCCR_TSEC2CM_SHIFT 28
+#define SCCR_TSEC2CM_0 0x00000000
+#define SCCR_TSEC2CM_1 0x10000000
+#define SCCR_TSEC2CM_2 0x20000000
+#define SCCR_TSEC2CM_3 0x30000000
-#define SCCR_USBMPHCM 0x00c00000
-#define SCCR_USBMPHCM_SHIFT 22
#define SCCR_USBDRCM 0x00300000
#define SCCR_USBDRCM_SHIFT 20
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00100000
+#define SCCR_USBDRCM_2 0x00200000
+#define SCCR_USBDRCM_3 0x00300000
+
+#define SCCR_PCIEXP1CM 0x00080000
+#define SCCR_PCIEXP2CM 0x00040000
+
+#define SCCR_SATA1CM 0x0000c000
+#define SCCR_SATA1CM_SHIFT 14
+#define SCCR_SATACM 0x0000f000
+#define SCCR_SATACM_SHIFT 8
+#define SCCR_SATACM_0 0x00000000
+#define SCCR_SATACM_1 0x00005000
+#define SCCR_SATACM_2 0x0000a000
+#define SCCR_SATACM_3 0x0000f000
+
+#define SCCR_TDMCM 0x000000c0
+#define SCCR_TDMCM_SHIFT 6
+#define SCCR_TDMCM_0 0x00000000
+#define SCCR_TDMCM_1 0x00000040
+#define SCCR_TDMCM_2 0x00000080
+#define SCCR_TDMCM_3 0x000000c0
+
+#elif defined(CONFIG_MPC837X)
+/* SCCR bits - MPC837x specific */
+#define SCCR_TSEC1CM 0xc0000000
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_0 0x00000000
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
-#define SCCR_USBCM_0 0x00000000
-#define SCCR_USBCM_1 0x00500000
-#define SCCR_USBCM_2 0x00A00000
-#define SCCR_USBCM_3 0x00F00000
+#define SCCR_TSEC2CM 0x30000000
+#define SCCR_TSEC2CM_SHIFT 28
+#define SCCR_TSEC2CM_0 0x00000000
+#define SCCR_TSEC2CM_1 0x10000000
+#define SCCR_TSEC2CM_2 0x20000000
+#define SCCR_TSEC2CM_3 0x30000000
+
+#define SCCR_SDHCCM 0x0c000000
+#define SCCR_SDHCCM_SHIFT 26
+#define SCCR_SDHCCM_0 0x00000000
+#define SCCR_SDHCCM_1 0x04000000
+#define SCCR_SDHCCM_2 0x08000000
+#define SCCR_SDHCCM_3 0x0c000000
+
+#define SCCR_USBDRCM 0x00c00000
+#define SCCR_USBDRCM_SHIFT 22
+#define SCCR_USBDRCM_0 0x00000000
+#define SCCR_USBDRCM_1 0x00400000
+#define SCCR_USBDRCM_2 0x00800000
+#define SCCR_USBDRCM_3 0x00c00000
+
+#define SCCR_PCIEXP1CM 0x00300000
+#define SCCR_PCIEXP1CM_SHIFT 20
+#define SCCR_PCIEXP1CM_0 0x00000000
+#define SCCR_PCIEXP1CM_1 0x00100000
+#define SCCR_PCIEXP1CM_2 0x00200000
+#define SCCR_PCIEXP1CM_3 0x00300000
+
+#define SCCR_PCIEXP2CM 0x000c0000
+#define SCCR_PCIEXP2CM_SHIFT 18
+#define SCCR_PCIEXP2CM_0 0x00000000
+#define SCCR_PCIEXP2CM_1 0x00040000
+#define SCCR_PCIEXP2CM_2 0x00080000
+#define SCCR_PCIEXP2CM_3 0x000c0000
+
+/* All of the four SATA controllers must have the same clock ratio */
+#define SCCR_SATA1CM 0x000000c0
+#define SCCR_SATA1CM_SHIFT 6
+#define SCCR_SATACM 0x000000ff
+#define SCCR_SATACM_SHIFT 0
+#define SCCR_SATACM_0 0x00000000
+#define SCCR_SATACM_1 0x00000055
+#define SCCR_SATACM_2 0x000000aa
+#define SCCR_SATACM_3 0x000000ff
+#endif
/* CSn_BDNS - Chip Select memory Bounds Register
*/
#define BR_MS_UPMA 0x00000080 /* UPMA */
#define BR_MS_UPMB 0x000000A0 /* UPMB */
#define BR_MS_UPMC 0x000000C0 /* UPMC */
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832X)
+#if !defined(CONFIG_MPC834X)
#define BR_ATOM 0x0000000C
#define BR_ATOM_SHIFT 2
#endif
#if defined(CONFIG_MPC834X)
#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_V)
-#elif defined(CONFIG_MPC8360)
+#else
#define BR_RES ~(BR_BA | BR_PS | BR_DECC | BR_WP | BR_MSEL | BR_ATOM | BR_V)
#endif
#define LTESR_CS 0x00080000
#define LTESR_CC 0x00000001
-/* DDR Control Driver Register
+/* DDRCDR - DDR Control Driver Register
*/
#define DDRCDR_EN 0x40000000
#define DDRCDR_PZ 0x3C000000
#if defined(CONFIG_UEC_ETH2)
uec_initialize(1);
#endif
+#if defined(CONFIG_UEC_ETH3)
+ uec_initialize(2);
+#endif
#if defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
fec_initialize(bis);
projects / oweals / u-boot.git / commitdiff