Blackfin: use on-chip syscontrol() rom function when available
authorMike Frysinger <vapier@gentoo.org>
Sun, 1 Jun 2008 05:29:57 +0000 (01:29 -0400)
committerMike Frysinger <vapier@gentoo.org>
Fri, 6 Feb 2009 02:25:28 +0000 (21:25 -0500)
Newer Blackfin's have an on-chip rom with a syscontrol() function that needs
to be used to properly program the memory and voltage settings as it will
include (possibly critical) factory tested bias values.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
cpu/blackfin/initcode.c

index 6091f8cef194a1b06fc7c248ccbf6fc995efac2f..7facdc3df93b0bdb2bb6ae4ba31784a655226725 100644 (file)
@@ -216,7 +216,7 @@ static inline void serial_putc(char c)
 # define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ)
 #endif
 
-__attribute__((saveall))
+BOOTROM_CALLED_FUNC_ATTR
 void initcode(ADI_BOOT_DATA *bootstruct)
 {
        uint32_t old_baud = serial_init();
@@ -267,34 +267,50 @@ void initcode(ADI_BOOT_DATA *bootstruct)
        bfin_write_SIC_IWR(1);
 #endif
 
-       serial_putc('L');
+       /* With newer bootroms, we use the helper function to set up
+        * the memory controller.  Older bootroms lacks such helpers
+        * so we do it ourselves.
+        */
+       if (BOOTROM_CAPS_SYSCONTROL) {
+               serial_putc('S');
 
-       bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
+               ADI_SYSCTRL_VALUES memory_settings;
+               memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL;
+               memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL;
+               memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL;
+               memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL;
+               syscontrol(SYSCTRL_WRITE | SYSCTRL_VRCTL | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT |
+                       (CONFIG_VR_CTL_VAL & FREQ_MASK ? SYSCTRL_INTVOLTAGE : SYSCTRL_EXTVOLTAGE), &memory_settings, NULL);
+       } else {
+               serial_putc('L');
 
-       serial_putc('A');
+               bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
 
-       /* Only reprogram when needed to avoid triggering unnecessary
-        * PLL relock sequences.
-        */
-       if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) {
-               serial_putc('!');
-               bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
-               asm("idle;");
-       }
+               serial_putc('A');
 
-       serial_putc('C');
+               /* Only reprogram when needed to avoid triggering unnecessary
+                * PLL relock sequences.
+                */
+               if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) {
+                       serial_putc('!');
+                       bfin_write_VR_CTL(CONFIG_VR_CTL_VAL);
+                       asm("idle;");
+               }
 
-       bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
+               serial_putc('C');
 
-       serial_putc('K');
+               bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL);
 
-       /* Only reprogram when needed to avoid triggering unnecessary
-        * PLL relock sequences.
-        */
-       if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
-               serial_putc('!');
-               bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
-               asm("idle;");
+               serial_putc('K');
+
+               /* Only reprogram when needed to avoid triggering unnecessary
+                * PLL relock sequences.
+                */
+               if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
+                       serial_putc('!');
+                       bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
+                       asm("idle;");
+               }
        }
 
        /* Since we've changed the SCLK above, we may need to update