at91: use C structs for AT91 OHCI code
authorMatthias Fuchs <matthias.fuchs@esd.eu>
Thu, 25 Mar 2010 13:30:13 +0000 (14:30 +0100)
committertrix <trix@windriver.com>
Sat, 3 Apr 2010 20:24:27 +0000 (15:24 -0500)
This patch is part of migrating the AT91 support towards
using C struct for all SOC access.

It removes one more CONFIG_AT91_LEGACY warning.

at91_pmc.h needs cleanup after migration of the drivers
has been done.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
drivers/usb/host/ohci-at91.c
include/asm-arm/arch-at91/at91_pmc.h

index 29f3ba186adc5449420c86e860235c9a880f3a82..b2e03bc58bcf87892198213637c579aa49e2056c 100644 (file)
 
 #if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 
-#ifndef CONFIG_AT91_LEGACY
-#define CONFIG_AT91_LEGACY
-#warning Please update to use C structur SoC access !
-#endif
-
 #include <asm/arch/hardware.h>
 #include <asm/arch/io.h>
 #include <asm/arch/at91_pmc.h>
 
 int usb_cpu_init(void)
 {
+       at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE;
 
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
     defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20) || \
     defined(CONFIG_AT91SAM9261)
        /* Enable PLLB */
-       at91_sys_write(AT91_CKGR_PLLBR, get_pllb_init());
-       while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
+       writel(get_pllb_init(), &pmc->pllbr);
+       while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB)
                ;
 #endif
 
        /* Enable USB host clock. */
-       at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_UHP);
+       writel(1 << AT91_ID_UHP, &pmc->pcer);
 #ifdef CONFIG_AT91SAM9261
-       at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP | AT91_PMC_HCK0);
+       writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scer);
 #else
-       at91_sys_write(AT91_PMC_SCER, AT91_PMC_UHP);
+       writel(AT91_PMC_UHP, &pmc->scer);
 #endif
 
        return 0;
@@ -60,19 +56,21 @@ int usb_cpu_init(void)
 
 int usb_cpu_stop(void)
 {
+       at91_pmc_t *pmc = (at91_pmc_t *)AT91_PMC_BASE;
+
        /* Disable USB host clock. */
-       at91_sys_write(AT91_PMC_PCDR, 1 << AT91_ID_UHP);
+       writel(1 << AT91_ID_UHP, &pmc->pcdr);
 #ifdef CONFIG_AT91SAM9261
-       at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP | AT91_PMC_HCK0);
+       writel(AT91_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr);
 #else
-       at91_sys_write(AT91_PMC_SCDR, AT91_PMC_UHP);
+       writel(AT91_PMC_UHP, &pmc->scdr);
 #endif
 
 #if defined(CONFIG_AT91CAP9) || defined(CONFIG_AT91SAM9260) || \
     defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G20)
        /* Disable PLLB */
-       at91_sys_write(AT91_CKGR_PLLBR, 0);
-       while ((at91_sys_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != 0)
+       writel(0, &pmc->pllbr);
+       while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0)
                ;
 #endif
 
index 680fe33270d54f87ef5f95573fa9467dc53458bd..5b1a85d051479416f8400ac96193ace31635b902 100644 (file)
@@ -108,11 +108,12 @@ typedef struct at91_pmc {
 #define AT91_PMC_IXR_PCKRDY3           0x00000800
 
 #ifdef CONFIG_AT91_LEGACY
-
 #define        AT91_PMC_SCER           (AT91_PMC + 0x00)       /* System Clock Enable Register */
 #define        AT91_PMC_SCDR           (AT91_PMC + 0x04)       /* System Clock Disable Register */
 
 #define        AT91_PMC_SCSR           (AT91_PMC + 0x08)       /* System Clock Status Register */
+#endif
+
 #define                AT91_PMC_PCK            (1 <<  0)               /* Processor Clock */
 #define                AT91RM9200_PMC_UDP      (1 <<  1)               /* USB Devcice Port Clock [AT91RM9200 only] */
 #define                AT91RM9200_PMC_MCKUDP   (1 <<  2)               /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
@@ -128,27 +129,34 @@ typedef struct at91_pmc {
 #define                AT91_PMC_HCK0           (1 << 16)               /* AHB Clock (USB host) [AT91SAM9261 only] */
 #define                AT91_PMC_HCK1           (1 << 17)               /* AHB Clock (LCD) [AT91SAM9261 only] */
 
+#ifdef CONFIG_AT91_LEGACY
 #define        AT91_PMC_PCER           (AT91_PMC + 0x10)       /* Peripheral Clock Enable Register */
 #define        AT91_PMC_PCDR           (AT91_PMC + 0x14)       /* Peripheral Clock Disable Register */
 #define        AT91_PMC_PCSR           (AT91_PMC + 0x18)       /* Peripheral Clock Status Register */
 
 #define        AT91_CKGR_UCKR          (AT91_PMC + 0x1C)       /* UTMI Clock Register [SAM9RL, CAP9] */
+#endif
+
 #define                AT91_PMC_UPLLEN         (1   << 16)             /* UTMI PLL Enable */
 #define                AT91_PMC_UPLLCOUNT      (0xf << 20)             /* UTMI PLL Start-up Time */
 #define                AT91_PMC_BIASEN         (1   << 24)             /* UTMI BIAS Enable */
 #define                AT91_PMC_BIASCOUNT      (0xf << 28)             /* UTMI PLL Start-up Time */
 
+#ifdef CONFIG_AT91_LEGACY
 #define        AT91_CKGR_MOR           (AT91_PMC + 0x20)       /* Main Oscillator Register [not on SAM9RL] */
+#endif
 #define                AT91_PMC_MOSCEN         (1    << 0)             /* Main Oscillator Enable */
 #define                AT91_PMC_OSCBYPASS      (1    << 1)             /* Oscillator Bypass [SAM9x, CAP9] */
 #define                AT91_PMC_OSCOUNT        (0xff << 8)             /* Main Oscillator Start-up Time */
-
+#ifdef CONFIG_AT91_LEGACY
 #define        AT91_CKGR_MCFR          (AT91_PMC + 0x24)       /* Main Clock Frequency Register */
+#endif
 #define                AT91_PMC_MAINF          (0xffff <<  0)          /* Main Clock Frequency */
 #define                AT91_PMC_MAINRDY        (1      << 16)          /* Main Clock Ready */
-
+#ifdef CONFIG_AT91_LEGACY
 #define        AT91_CKGR_PLLAR         (AT91_PMC + 0x28)       /* PLL A Register */
 #define        AT91_CKGR_PLLBR         (AT91_PMC + 0x2c)       /* PLL B Register */
+#endif
 #define                AT91_PMC_DIV            (0xff  <<  0)           /* Divider */
 #define                AT91_PMC_PLLCOUNT       (0x3f  <<  8)           /* PLL Counter */
 #define                AT91_PMC_OUT            (3     << 14)           /* PLL Clock Frequency Range */
@@ -160,7 +168,9 @@ typedef struct at91_pmc {
 #define                AT91_PMC_USB96M         (1     << 28)           /* Divider by 2 Enable (PLLB only) */
 #define                AT91_PMC_PLLA_WR_ERRATA (1     << 29)           /* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
 
+#ifdef CONFIG_AT91_LEGACY
 #define        AT91_PMC_MCKR           (AT91_PMC + 0x30)       /* Master Clock Register */
+#endif
 #define                AT91_PMC_CSS            (3 <<  0)               /* Master Clock Selection */
 #define                        AT91_PMC_CSS_SLOW               (0 << 0)
 #define                        AT91_PMC_CSS_MAIN               (1 << 0)
@@ -188,11 +198,13 @@ typedef struct at91_pmc {
 #define                        AT91_PMC_PDIV_1                 (0 << 12)
 #define                        AT91_PMC_PDIV_2                 (1 << 12)
 
+#ifdef CONFIG_AT91_LEGACY
 #define        AT91_PMC_PCKR(n)        (AT91_PMC + 0x40 + ((n) * 4))   /* Programmable Clock 0-3 Registers */
 
 #define        AT91_PMC_IER            (AT91_PMC + 0x60)       /* Interrupt Enable Register */
 #define        AT91_PMC_IDR            (AT91_PMC + 0x64)       /* Interrupt Disable Register */
 #define        AT91_PMC_SR             (AT91_PMC + 0x68)       /* Status Register */
+#endif
 #define                AT91_PMC_MOSCS          (1 <<  0)               /* MOSCS Flag */
 #define                AT91_PMC_LOCKA          (1 <<  1)               /* PLLA Lock */
 #define                AT91_PMC_LOCKB          (1 <<  2)               /* PLLB Lock */
@@ -203,12 +215,13 @@ typedef struct at91_pmc {
 #define                AT91_PMC_PCK1RDY        (1 <<  9)               /* Programmable Clock 1 */
 #define                AT91_PMC_PCK2RDY        (1 << 10)               /* Programmable Clock 2 */
 #define                AT91_PMC_PCK3RDY        (1 << 11)               /* Programmable Clock 3 */
+#ifdef CONFIG_AT91_LEGACY
 #define        AT91_PMC_IMR            (AT91_PMC + 0x6c)       /* Interrupt Mask Register */
 
 #define AT91_PMC_PROT          (AT91_PMC + 0xe4)       /* Protect Register [AT91CAP9 revC only] */
+#endif
 #define                AT91_PMC_PROTKEY        0x504d4301      /* Activation Code */
-
+#ifdef CONFIG_AT91_LEGACY
 #define AT91_PMC_VER           (AT91_PMC + 0xfc)       /* PMC Module Version [AT91CAP9 only] */
-
 #endif /* CONFIG_AT91_LEGACY */
 #endif