Active arm armv7 u8500 st-ericsson snowball snowball - Mathieu Poirier <mathieu.poirier@linaro.org>
Active arm armv7 u8500 st-ericsson u8500 u8500_href - -
Active arm armv7 vf610 freescale vf610twr vf610twr vf610twr:IMX_CONFIG=board/freescale/vf610twr/imximage.cfg Alison Wang <b18965@freescale.com>
-Active arm armv7 zynq xilinx zynq zynq - Michal Simek <monstr@monstr.eu>
-Active arm armv7 zynq xilinx zynq zynq_dcc zynq:ZYNQ_DCC Michal Simek <monstr@monstr.eu>
Active arm armv7:arm720t tegra114 nvidia dalmore dalmore - Tom Warren <twarren@nvidia.com>
Active arm armv7:arm720t tegra20 avionic-design medcom-wide medcom-wide - Alban Bedel <alban.bedel@avionic-design.de>
Active arm armv7:arm720t tegra20 avionic-design plutux plutux - Alban Bedel <alban.bedel@avionic-design.de>
--- /dev/null
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Common configuration options for all Zynq boards.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_COMMON_H
+#define __CONFIG_ZYNQ_COMMON_H
+
+/* High Level configuration Options */
+#define CONFIG_ARMV7
+#define CONFIG_ZYNQ
+
+/* CPU clock */
+#ifndef CONFIG_CPU_FREQ_HZ
+# define CONFIG_CPU_FREQ_HZ 800000000
+#endif
+
+/* Cache options */
+#define CONFIG_CMD_CACHE
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+#define CONFIG_SYS_L2CACHE_OFF
+#ifndef CONFIG_SYS_L2CACHE_OFF
+# define CONFIG_SYS_L2_PL310
+# define CONFIG_SYS_PL310_BASE 0xf8f02000
+#endif
+
+/* Serial drivers */
+#define CONFIG_BAUDRATE 115200
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/* Zynq Serial driver */
+#define CONFIG_ZYNQ_SERIAL_UART1
+#ifdef CONFIG_ZYNQ_SERIAL_UART0
+# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
+#endif
+
+#ifdef CONFIG_ZYNQ_SERIAL_UART1
+# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000
+# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE
+# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000
+#endif
+
+#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
+# define CONFIG_ZYNQ_SERIAL
+#endif
+
+/* DCC driver */
+#if defined(CONFIG_ZYNQ_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#endif
+
+/* Ethernet driver */
+#define CONFIG_ZYNQ_GEM0
+#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
+#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
+# define CONFIG_NET_MULTI
+# define CONFIG_ZYNQ_GEM
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MARVELL
+#endif
+
+#define CONFIG_ZYNQ_SPI
+/* SPI */
+#ifdef CONFIG_ZYNQ_SPI
+# define CONFIG_SPI_FLASH
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_CMD_SF
+#endif
+
+/* NOR */
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_ZYNQ_SDHCI0
+/* MMC */
+#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_MMC
+# define CONFIG_GENERIC_MMC
+# define CONFIG_SDHCI
+# define CONFIG_ZYNQ_SDHCI
+# define CONFIG_CMD_MMC
+# define CONFIG_CMD_FAT
+# define CONFIG_SUPPORT_VFAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_ZYNQ_I2C0
+/* I2C */
+#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
+# define CONFIG_CMD_I2C
+# define CONFIG_SYS_I2C
+# define CONFIG_SYS_I2C_ZYNQ
+# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
+# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
+#endif
+
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+
+/* Environment */
+#define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_LOAD_ADDR 0
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_PROMPT "zynq-uboot> "
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Physical Memory map */
+#define CONFIG_SYS_TEXT_BASE 0
+
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_SDRAM_SIZE 0x40000000
+
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
+
+#define CONFIG_SYS_MALLOC_LEN 0x400000
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Enable the PL to be downloaded */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_ZYNQPL
+#define CONFIG_CMD_FPGA
+
+/* Open Firmware flat tree */
+#define CONFIG_OF_LIBFDT
+
+/* FIT support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
+
+/* Boot FreeBSD/vxWorks from an ELF image */
+#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
+# define CONFIG_API
+# define CONFIG_CMD_ELF
+# define CONFIG_SYS_MMC_MAX_DEVICE 1
+#endif
+
+/* Commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+
+#endif /* __CONFIG_ZYNQ_COMMON_H */
+++ /dev/null
-/*
- * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_ZYNQ_H
-#define __CONFIG_ZYNQ_H
-
-/* High Level configuration Options */
-#define CONFIG_ARMV7
-#define CONFIG_ZYNQ
-
-/* CPU clock */
-#ifndef CONFIG_CPU_FREQ_HZ
-# define CONFIG_CPU_FREQ_HZ 800000000
-#endif
-
-/* Cache options */
-#define CONFIG_CMD_CACHE
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-#define CONFIG_SYS_L2CACHE_OFF
-#ifndef CONFIG_SYS_L2CACHE_OFF
-# define CONFIG_SYS_L2_PL310
-# define CONFIG_SYS_PL310_BASE 0xf8f02000
-#endif
-
-/* Serial drivers */
-#define CONFIG_BAUDRATE 115200
-/* The following table includes the supported baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE \
- {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
-
-/* Zynq Serial driver */
-#define CONFIG_ZYNQ_SERIAL_UART1
-#ifdef CONFIG_ZYNQ_SERIAL_UART0
-# define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0000000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
-#endif
-
-#ifdef CONFIG_ZYNQ_SERIAL_UART1
-# define CONFIG_ZYNQ_SERIAL_BASEADDR1 0xE0001000
-# define CONFIG_ZYNQ_SERIAL_BAUDRATE1 CONFIG_BAUDRATE
-# define CONFIG_ZYNQ_SERIAL_CLOCK1 50000000
-#endif
-
-#if defined(CONFIG_ZYNQ_SERIAL_UART0) || defined(CONFIG_ZYNQ_SERIAL_UART1)
-# define CONFIG_ZYNQ_SERIAL
-#endif
-
-/* DCC driver */
-#if defined(CONFIG_ZYNQ_DCC)
-# define CONFIG_ARM_DCC
-# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
-#endif
-
-/* Ethernet driver */
-#define CONFIG_ZYNQ_GEM0
-#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7
-#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
-# define CONFIG_NET_MULTI
-# define CONFIG_ZYNQ_GEM
-# define CONFIG_MII
-# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-# define CONFIG_PHYLIB
-# define CONFIG_PHY_MARVELL
-#endif
-
-#define CONFIG_ZYNQ_SPI
-/* SPI */
-#ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
-# define CONFIG_SPI_FLASH_SST
-# define CONFIG_CMD_SF
-#endif
-
-/* NOR */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ZYNQ_SDHCI0
-/* MMC */
-#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
-# define CONFIG_MMC
-# define CONFIG_GENERIC_MMC
-# define CONFIG_SDHCI
-# define CONFIG_ZYNQ_SDHCI
-# define CONFIG_CMD_MMC
-# define CONFIG_CMD_FAT
-# define CONFIG_SUPPORT_VFAT
-# define CONFIG_CMD_EXT2
-# define CONFIG_DOS_PARTITION
-#endif
-
-#define CONFIG_ZYNQ_I2C0
-/* I2C */
-#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
-# define CONFIG_CMD_I2C
-# define CONFIG_SYS_I2C
-# define CONFIG_SYS_I2C_ZYNQ
-# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
-# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
-#endif
-
-#define CONFIG_BOOTP_SERVERIP
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_MAY_FAIL
-
-/* Environment */
-#define CONFIG_ENV_SIZE 0x10000 /* Env. sector size */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_LOAD_ADDR 0
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_PROMPT "zynq-uboot> "
-#define CONFIG_SYS_HUSH_PARSER
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* Physical Memory map */
-#define CONFIG_SYS_TEXT_BASE 0
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define CONFIG_SYS_SDRAM_BASE 0
-#define CONFIG_SYS_SDRAM_SIZE 0x40000000
-
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
-
-#define CONFIG_SYS_MALLOC_LEN 0x400000
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-/* Enable the PL to be downloaded */
-#define CONFIG_FPGA
-#define CONFIG_FPGA_XILINX
-#define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
-
-/* Open Firmware flat tree */
-#define CONFIG_OF_LIBFDT
-
-/* FIT support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
-
-/* Boot FreeBSD/vxWorks from an ELF image */
-#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
-# define CONFIG_API
-# define CONFIG_CMD_ELF
-# define CONFIG_SYS_MMC_MAX_DEVICE 1
-#endif
-
-/* Commands */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#endif /* __CONFIG_ZYNQ_H */
projects / oweals / u-boot.git / commitdiff