powerpc/85xx: Rework P1_P2_RDB pci_init_board to use common FSL PCIe code
authorKumar Gala <galak@kernel.crashing.org>
Fri, 17 Dec 2010 16:42:01 +0000 (10:42 -0600)
committerKumar Gala <galak@kernel.crashing.org>
Fri, 14 Jan 2011 07:32:20 +0000 (01:32 -0600)
Remove duplicated code in P1_P2_RDB boards and utilize the common
fsl_pcie_init_board().  We also now dynamically setup the LAWs for PCI
controllers based on which PCIe controllers are enabled.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
board/freescale/p1_p2_rdb/law.c
board/freescale/p1_p2_rdb/pci.c
include/configs/P1_P2_RDB.h

index 1320d5da041be62e4a73a569c3ec76710045d759..4c80fa6ed4150ce32e7f28a0101f9c4ceaf34931 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
 
 struct law_entry law_table[] = {
        SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_16M, LAW_TRGT_IF_LBC),
-       SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_1),
-       SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1),
-       SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCIE_2),
-       SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_2),
        SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_128K, LAW_TRGT_IF_LBC),
        SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
 };
index 2034459b66e2552142a7df7204d8562678a78d68..bd1a91e313aaff877e032ed3b4f08ca087a30b11 100644 (file)
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif
-
 void pci_init_board(void)
 {
-       volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-       struct fsl_pci_info pci_info[2];
-       u32 devdisr, pordevsr;
-       int first_free_busno = 0;
-       int num = 0;
-
-       int pcie_ep, pcie_configured;
-
-       devdisr = in_be32(&gur->devdisr);
-       pordevsr = in_be32(&gur->pordevsr);
-
-       puts("\n");
-#ifdef CONFIG_PCIE2
-       pcie_configured = is_serdes_configured(PCIE2);
-
-       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-               SET_STD_PCIE_INFO(pci_info[num], 2);
-               pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
-               printf("PCIE2: connected to Slot 1 as %s (base addr %lx)\n",
-                       pcie_ep ? "Endpoint" : "Root Complex",
-                       pci_info[num].regs);
-               first_free_busno = fsl_pci_init_port(&pci_info[num++],
-                                       &pcie2_hose, first_free_busno);
-       } else {
-               printf("PCIE2: disabled\n");
-       }
-       puts("\n");
-#else
-       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE1
-       pcie_configured = is_serdes_configured(PCIE1);
-
-       if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
-               SET_STD_PCIE_INFO(pci_info[num], 1);
-               pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
-               printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
-                       pcie_ep ? "Endpoint" : "Root Complex",
-                       pci_info[num].regs);
-               first_free_busno = fsl_pci_init_port(&pci_info[num++],
-                                       &pcie1_hose, first_free_busno);
-       } else {
-               printf("PCIE1: disabled\n");
-       }
-       puts("\n");
-#else
-       setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
-#endif
+       fsl_pcie_init_board(0);
 }
 
 void ft_pci_board_setup(void *blob)
index d479a0985baa5a0043340aed3279d5718a267b09..6862e6db9fdb78e081a02bac49f427466f60893b 100644 (file)
@@ -358,6 +358,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 
 /* controller 2, Slot 2, tgtid 2, Base address 9000 */
+#define CONFIG_SYS_PCIE2_NAME          "Slot 1"
 #define CONFIG_SYS_PCIE2_MEM_VIRT      0xa0000000
 #define CONFIG_SYS_PCIE2_MEM_BUS       0xa0000000
 #define CONFIG_SYS_PCIE2_MEM_PHYS      0xa0000000
@@ -368,6 +369,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00010000      /* 64k */
 
 /* controller 1, Slot 1, tgtid 1, Base address a000 */
+#define CONFIG_SYS_PCIE1_NAME          "Slot 2"
 #define CONFIG_SYS_PCIE1_MEM_VIRT      0xc0000000
 #define CONFIG_SYS_PCIE1_MEM_BUS       0xc0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS      0xc0000000