This parameter will later be used to verify OTG ports.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
*/
static char ohci_inited = 0;
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
u32 pin_func;
u32 sys_freqctrl, sys_clksrc;
*/
static char ohci_inited = 0;
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
/* Set the USB Clock */
*/
static char ohci_inited = 0;
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
memset (&gohci, 0, sizeof (ohci_t));
memset (&urb_priv, 0, sizeof (urb_priv_t));
/* init uhci
*/
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
unsigned char temp;
ambapp_ahbdev ahbdev;
/* init uhci
*/
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
unsigned char temp;
int busdevfunc;
for (i = 0; i < CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
/* init low_level USB */
printf("USB%d: ", i);
- if (usb_lowlevel_init(i, &ctrl)) {
+ if (usb_lowlevel_init(i, USB_INIT_HOST, &ctrl)) {
puts("lowlevel init failed\n");
continue;
}
if (driver->speed != USB_SPEED_FULL && driver->speed != USB_SPEED_HIGH)
return -EINVAL;
- ret = usb_lowlevel_init(0, (void **)&controller.ctrl);
+ ret = usb_lowlevel_init(0, USB_INIT_DEVICE, (void **)&controller.ctrl);
if (ret)
return ret;
return ehci_hcd_stop(index);
}
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
uint32_t reg;
uint32_t cmd;
return 0;
}
-int usb_lowlevel_init(int index, void **controller))
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller))
{
struct isp116x *isp116x = &isp116x_dev;
*/
static char ohci_inited = 0;
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
#ifdef CONFIG_PCI_OHCI
pci_dev_t pdev;
*/
static char ohci_inited = 0;
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
return 0;
}
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
struct r8a66597 *r8a66597 = &gr8a66597;
return 1;
}
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
root_hub_devnum = 0;
sl811_hc_reset();
* @param index index to the host controller data structure
* @return pointer to the intialised controller
*/
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
uint32_t val;
uint32_t val2;
return submit_urb(&hcd, urb);
}
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
u8 power;
void *mbase;
/*
* This function initializes the usb controller module.
*/
-int usb_lowlevel_init(int index, void **controller)
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
u8 power;
u32 timeout;
defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI)
-int usb_lowlevel_init(int index, void **controller);
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
int usb_lowlevel_stop(int index);
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,