gw8260 MPC8260
+Cyril Chemparathy <cyril@ti.com>
+
+ tnetv107x_evm tnetv107x
+
Conn Clark <clark@esteem.com>
ESTEEM192E MPC8xx
mx31pdk_nand \
qong \
smdk6400 \
+ tnetv107x_evm \
"
#########################################################################
fi
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+tnetv107x_evm_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1176 tnetv107xevm ti tnetv107x
+
#========================================================================
# i386
#========================================================================
--- /dev/null
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS += sdb_board.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+.PHONY: all
+
+all: $(LIB)
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak *~ .depend
+
+#########################################################################
+# This is for $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+#
+
+TEXT_BASE = 0x83FC0000
--- /dev/null
+/*
+ * TNETV107X-EVM: Board initialization
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <linux/mtd/nand.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+#include <asm/io.h>
+#include <asm/mach-types.h>
+#include <asm/arch/nand_defs.h>
+#include <asm/arch/mux.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = {
+ { /* CS0 */
+ .mode = ASYNC_EMIF_MODE_NAND,
+ .wr_setup = 5,
+ .wr_strobe = 5,
+ .wr_hold = 2,
+ .rd_setup = 5,
+ .rd_strobe = 5,
+ .rd_hold = 2,
+ .turn_around = 5,
+ .width = ASYNC_EMIF_8,
+ },
+ { /* CS1 */
+ .mode = ASYNC_EMIF_MODE_NOR,
+ .wr_setup = 2,
+ .wr_strobe = 27,
+ .wr_hold = 4,
+ .rd_setup = 2,
+ .rd_strobe = 27,
+ .rd_hold = 4,
+ .turn_around = 2,
+ .width = ASYNC_EMIF_PRESERVE,
+ },
+ { /* CS2 */
+ .mode = ASYNC_EMIF_MODE_NOR,
+ .wr_setup = 2,
+ .wr_strobe = 27,
+ .wr_hold = 4,
+ .rd_setup = 2,
+ .rd_strobe = 27,
+ .rd_hold = 4,
+ .turn_around = 2,
+ .width = ASYNC_EMIF_PRESERVE,
+ },
+ { /* CS3 */
+ .mode = ASYNC_EMIF_MODE_NOR,
+ .wr_setup = 1,
+ .wr_strobe = 90,
+ .wr_hold = 3,
+ .rd_setup = 1,
+ .rd_strobe = 26,
+ .rd_hold = 3,
+ .turn_around = 1,
+ .width = ASYNC_EMIF_8,
+ },
+};
+
+static struct pll_init_data pll_config[] = {
+ {
+ .pll = ETH_PLL,
+ .internal_osc = 1,
+ .pll_freq = 500000000,
+ .div_freq = {
+ 5000000, 50000000, 125000000, 250000000, 25000000,
+ },
+ },
+};
+
+static const short sdio1_pins[] = {
+ TNETV107X_PIN_SDIO1_CLK_1, TNETV107X_PIN_SDIO1_CMD_1,
+ TNETV107X_PIN_SDIO1_DATA0_1, TNETV107X_PIN_SDIO1_DATA1_1,
+ TNETV107X_PIN_SDIO1_DATA2_1, TNETV107X_PIN_SDIO1_DATA3_1,
+ -1
+};
+
+static const short uart1_pins[] = {
+ TNETV107X_PIN_UART1_RD, TNETV107X_PIN_UART1_TD, -1
+};
+
+static const short ssp_pins[] = {
+ TNETV107X_PIN_SSP0_0, TNETV107X_PIN_SSP0_1, TNETV107X_PIN_SSP0_2,
+ TNETV107X_PIN_SSP1_0, TNETV107X_PIN_SSP1_1, TNETV107X_PIN_SSP1_2,
+ TNETV107X_PIN_SSP1_3, -1
+};
+
+int board_init(void)
+{
+#ifndef CONFIG_USE_IRQ
+ __raw_writel(0, INTC_GLB_EN); /* Global disable */
+ __raw_writel(0, INTC_HINT_EN); /* Disable host ints */
+ __raw_writel(0, INTC_EN_CLR0 + 0); /* Clear enable */
+ __raw_writel(0, INTC_EN_CLR0 + 4); /* Clear enable */
+ __raw_writel(0, INTC_EN_CLR0 + 8); /* Clear enable */
+#endif
+
+ gd->bd->bi_arch_number = MACH_TYPE_TNETV107X;
+ gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
+
+ init_plls(ARRAY_SIZE(pll_config), pll_config);
+
+ init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config);
+
+ mux_select_pin(TNETV107X_PIN_ASR_CS3);
+ mux_select_pins(sdio1_pins);
+ mux_select_pins(uart1_pins);
+ mux_select_pins(ssp_pins);
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ return 0;
+}
+
+#ifdef CONFIG_NAND_DAVINCI
+int board_nand_init(struct nand_chip *nand)
+{
+ davinci_nand_init(nand);
+
+ return 0;
+}
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com>
+ *
+ * Based on davinci_dvevm.h. Original Copyrights follow:
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/sizes.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/clock.h>
+
+/* Architecture, CPU, etc */
+#define CONFIG_ARM1176
+#define CONFIG_TNETV107X
+#define CONFIG_TNETV107X_EVM
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_SYS_UBOOT_BASE TEXT_BASE
+#define CONFIG_DISABLE_TCM
+#define CONFIG_PERIPORT_REMAP
+#define CONFIG_PERIPORT_BASE 0x2000000
+#define CONFIG_PERIPORT_SIZE 0x10
+#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM)
+
+#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE
+#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0)
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_PLL_SYS_EXT_FREQ 25000000
+#define CONFIG_PLL_TDM_EXT_FREQ 19200000
+#define CONFIG_PLL_ETH_EXT_FREQ 25000000
+
+/* Memory Info */
+#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024)
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE
+#define PHYS_SDRAM_1_SIZE 0x04000000
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024)
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_STACKSIZE (256*1024)
+
+/* Serial Driver Info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE
+#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1)
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Flash and environment info */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_ENV_SIZE (SZ_128K)
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_NAND_1BIT_ECC
+#define CONFIG_SYS_NAND_CS 2
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE
+#define CONFIG_SYS_CLE_MASK 0x10
+#define CONFIG_SYS_ALE_MASK 0x8
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_JFFS2_NAND
+#define NAND_MAX_CHIPS 1
+#define CONFIG_ENV_OFFSET 0x180000
+#define DEF_BOOTM ""
+
+/*
+ * davinci_nand is a bit of a misnomer since this particular EMIF block is
+ * commonly used across multiple TI devices. Unfortunately, this misnomer
+ * (amongst others) carries forward into the kernel too. Consequently, if we
+ * use a different device name here, the mtdparts variable won't be usable as
+ * a kernel command-line argument.
+ */
+#define MTDIDS_DEFAULT "nand0=davinci_nand.0"
+#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \
+ "1536k(uboot)ro," \
+ "128k(params)ro," \
+ "4m(kernel)," \
+ "-(filesystem)"
+
+/* General U-Boot configuration */
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_SYS_PROMPT "U-Boot > "
+#define CONFIG_SYS_CBSIZE 1024
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \
+ 0x700000)
+#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100)
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \
+ "root=/dev/mmcblk0p1 rw noinitrd"
+#define CONFIG_BOOTCOMMAND ""
+#define CONFIG_BOOTDELAY 1
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EDITENV
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ITEST
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_JFFS2
+
+#endif /* __CONFIG_H */
projects / oweals / u-boot.git / commitdiff