config SYS_ICACHE_LINE_SIZE
default 32
+config SYS_TEXT_BASE
+ default 0x9c000000
+
choice
prompt "MediaTek MIPS SoC select"
config SOC_MT7628
bool "MT7628"
select MIPS_L1_CACHE_SHIFT_5
+ select MIPS_INIT_STACK_IN_SRAM
+ select MIPS_SRAM_INIT
+ select SYS_MIPS_CACHE_INIT_RAM_LOAD
select PINCTRL_MT7628
select MTK_SERIAL
select SYSRESET_RESETCTL
endchoice
-choice
- prompt "DDR2 size"
-
-config ONBOARD_DDR2_SIZE_256MBIT
- bool "256MBit (32MByte) total size"
- depends on BOOT_ROM
- help
- Use 256MBit (32MByte) of DDR total size
-
-config ONBOARD_DDR2_SIZE_512MBIT
- bool "512MBit (64MByte) total size"
- depends on BOOT_ROM
- help
- Use 512MBit (64MByte) of DDR total size
-
-config ONBOARD_DDR2_SIZE_1024MBIT
- bool "1024MBit (128MByte) total size"
- depends on BOOT_ROM
- help
- Use 1024MBit (128MByte) of DDR total size
-
-config ONBOARD_DDR2_SIZE_2048MBIT
- bool "2048MBit (256MByte) total size"
- depends on BOOT_ROM
- help
- Use 2048MBit (256MByte) of DDR total size
-
-endchoice
-
-choice
- prompt "DDR2 chip width"
-
-config ONBOARD_DDR2_CHIP_WIDTH_8BIT
- bool "8bit DDR chip width"
- depends on BOOT_ROM
- help
- Use DDR chips with 8bit width
-
-config ONBOARD_DDR2_CHIP_WIDTH_16BIT
- bool "16bit DDR chip width"
- depends on BOOT_ROM
- help
- Use DDR chips with 16bit width
-
-endchoice
-
-choice
- prompt "DDR2 bus width"
-
-config ONBOARD_DDR2_BUS_WIDTH_16BIT
- bool "16bit DDR bus width"
- depends on BOOT_ROM
- help
- Use 16bit DDR bus width
-
-config ONBOARD_DDR2_BUS_WIDTH_32BIT
- bool "32bit DDR bus width"
- depends on BOOT_ROM
- help
- Use 32bit DDR bus width
-
-endchoice
-
config SUPPORTS_BOOT_RAM
bool
# SPDX-License-Identifier: GPL-2.0+
obj-y += cpu.o
+obj-y += ddr_init.o
+obj-y += ddr_cal.o
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-obj-y += ddr_calibrate.o
-obj-y += lowlevel_init.o
-endif
+obj-$(CONFIG_SOC_MT7628) += mt7628/
*/
#include <common.h>
-#include <dm.h>
-#include <init.h>
#include <malloc.h>
-#include <ram.h>
-#include <wdt.h>
-#include <asm/io.h>
#include <linux/io.h>
#include <linux/sizes.h>
-#include "mt76xx.h"
-#define STR_LEN 6
-
-#ifdef CONFIG_BOOT_ROM
-int mach_cpu_init(void)
-{
- ddr_calibrate();
-
- return 0;
-}
-#endif
+DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
+#ifdef CONFIG_SKIP_LOWLEVEL_INIT
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, SZ_256M);
-
- return 0;
-}
-
-int print_cpuinfo(void)
-{
- static const char * const boot_str[] = { "PLL (3-Byte SPI Addr)",
- "PLL (4-Byte SPI Addr)",
- "XTAL (3-Byte SPI Addr)",
- "XTAL (4-Byte SPI Addr)" };
- const void *blob = gd->fdt_blob;
- void __iomem *sysc_base;
- char buf[STR_LEN + 1];
- fdt_addr_t base;
- fdt_size_t size;
- char *str;
- int node;
- u32 val;
-
- /* Get system controller base address */
- node = fdt_node_offset_by_compatible(blob, -1, "ralink,mt7620a-sysc");
- if (node < 0)
- return -FDT_ERR_NOTFOUND;
-
- base = fdtdec_get_addr_size_auto_noparent(blob, node, "reg",
- 0, &size, true);
- if (base == FDT_ADDR_T_NONE)
- return -EINVAL;
-
- sysc_base = ioremap_nocache(base, size);
-
- str = (char *)sysc_base + MT76XX_CHIPID_OFFS;
- snprintf(buf, STR_LEN + 1, "%s", str);
- val = readl(sysc_base + MT76XX_CHIP_REV_ID_OFFS);
- printf("CPU: %-*s Rev %ld.%ld - ", STR_LEN, buf,
- (val & GENMASK(11, 8)) >> 8, val & GENMASK(3, 0));
-
- val = (readl(sysc_base + MT76XX_SYSCFG0_OFFS) & GENMASK(3, 1)) >> 1;
- printf("Boot from %s\n", boot_str[val]);
+#endif
return 0;
}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <common.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <mach/mc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define COARSE_MIN_START 6
+#define FINE_MIN_START 15
+#define COARSE_MAX_START 7
+#define FINE_MAX_START 0
+
+#define NUM_OF_CACHELINE 128
+#define TEST_PAT_SIZE (NUM_OF_CACHELINE * CONFIG_SYS_CACHELINE_SIZE)
+
+#define INIT_DQS_VAL ((7 << DQS1_DELAY_COARSE_TUNING_S) | \
+ (4 << DQS1_DELAY_FINE_TUNING_S) | \
+ (7 << DQS0_DELAY_COARSE_TUNING_S) | \
+ (4 << DQS0_DELAY_FINE_TUNING_S))
+
+static inline void pref_op(int op, const volatile void *addr)
+{
+ __asm__ __volatile__("pref %0, 0(%1)" : : "i" (op), "r" (addr));
+}
+
+static inline int dqs_test_valid(void __iomem *memc, u32 memsize, u32 dqsval,
+ u32 bias)
+{
+ u32 *nca, *ca;
+ u32 off;
+ int i;
+
+ for (off = 0; off < memsize - TEST_PAT_SIZE; off += (memsize >> 6)) {
+ nca = (u32 *)KSEG1ADDR(off);
+ ca = (u32 *)KSEG0ADDR(off);
+
+ writel(INIT_DQS_VAL, memc + MEMCTL_DDR_DQS_DLY_REG);
+ wmb();
+
+ for (i = 0; i < TEST_PAT_SIZE / sizeof(u32); i++)
+ ca[i] = 0x1f1f1f1f;
+
+ for (i = 0; i < TEST_PAT_SIZE / sizeof(u32); i++)
+ nca[i] = (u32)nca + i + bias;
+
+ writel(dqsval, memc + MEMCTL_DDR_DQS_DLY_REG);
+ wmb();
+
+ for (i = 0; i < TEST_PAT_SIZE; i += CONFIG_SYS_CACHELINE_SIZE)
+ mips_cache(HIT_INVALIDATE_D, (u8 *)ca + i);
+ wmb();
+
+ for (i = 0; i < TEST_PAT_SIZE; i += CONFIG_SYS_CACHELINE_SIZE)
+ pref_op(0, (u8 *)ca + i);
+
+ for (i = 0; i < TEST_PAT_SIZE / sizeof(u32); i++) {
+ if (ca[i] != (u32)nca + i + bias)
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static inline u32 dqs_find_max(void __iomem *memc, u32 memsize, u32 initval,
+ u32 maxval, u32 shift, u32 regval)
+{
+ u32 fieldval = initval, dqsval;
+
+ do {
+ dqsval = regval | (fieldval << shift);
+
+ if (dqs_test_valid(memc, memsize, dqsval, 3))
+ break;
+
+ fieldval++;
+ } while (fieldval <= maxval);
+
+ return fieldval;
+}
+
+static inline u32 dqs_find_min(void __iomem *memc, u32 memsize, u32 initval,
+ u32 minval, u32 shift, u32 regval)
+{
+ u32 fieldval = initval, dqsval;
+
+ while (fieldval > minval) {
+ dqsval = regval | (fieldval << shift);
+
+ if (dqs_test_valid(memc, memsize, dqsval, 1)) {
+ fieldval++;
+ break;
+ }
+
+ fieldval--;
+ }
+
+ return fieldval;
+}
+
+void ddr_calibrate(void __iomem *memc, u32 memsize, u32 bw)
+{
+ u32 dqs_coarse_min, dqs_coarse_max, dqs_coarse_val;
+ u32 dqs_fine_min, dqs_fine_max, dqs_fine_val;
+ u32 dqs_coarse_min_limit, dqs_fine_min_limit;
+ u32 dlls, dqs_dll, ddr_cfg2_reg;
+ u32 dqs_dly_tmp, dqs_dly, test_dqs, shift;
+ u32 rem, mask;
+ int i;
+
+ /* Disable Self-refresh */
+ clrbits_32(memc + MEMCTL_DDR_SELF_REFRESH_REG, SR_AUTO_EN);
+
+ /* Save DDR_CFG2 and modify its DQS gating window */
+ ddr_cfg2_reg = readl(memc + MEMCTL_DDR_CFG2_REG);
+ mask = DQS0_GATING_WINDOW_M;
+ if (bw == IND_SDRAM_WIDTH_16BIT)
+ mask |= DQS1_GATING_WINDOW_M;
+ clrbits_32(memc + MEMCTL_DDR_CFG2_REG, mask);
+
+ /* Get minimum available DQS value */
+ dlls = readl(memc + MEMCTL_DLL_DBG_REG);
+ dlls = (dlls & MST_DLY_SEL_M) >> MST_DLY_SEL_S;
+
+ dqs_dll = dlls >> 4;
+ if (dqs_dll <= 8)
+ dqs_coarse_min_limit = 8 - dqs_dll;
+ else
+ dqs_coarse_min_limit = 0;
+
+ dqs_dll = dlls & 0xf;
+ if (dqs_dll <= 8)
+ dqs_fine_min_limit = 8 - dqs_dll;
+ else
+ dqs_fine_min_limit = 0;
+
+ /* Initial DQS register value */
+ dqs_dly = INIT_DQS_VAL;
+
+ /* Calibrate DQS0 and/or DQS1 */
+ for (i = 0; i < bw; i++) {
+ shift = i * 8;
+ dqs_dly &= ~(0xff << shift);
+
+ /* Find maximum DQS coarse-grain */
+ dqs_dly_tmp = dqs_dly | (0xf << shift);
+ dqs_coarse_max = dqs_find_max(memc, memsize, COARSE_MAX_START,
+ 0xf, 4 + shift, dqs_dly_tmp);
+
+ /* Find maximum DQS fine-grain */
+ dqs_dly_tmp = dqs_dly | (dqs_coarse_max << (4 + shift));
+ test_dqs = dqs_find_max(memc, memsize, FINE_MAX_START, 0xf,
+ shift, dqs_dly_tmp);
+
+ if (test_dqs == FINE_MAX_START) {
+ dqs_coarse_max--;
+ dqs_fine_max = 0xf;
+ } else {
+ dqs_fine_max = test_dqs - 1;
+ }
+
+ /* Find minimum DQS coarse-grain */
+ dqs_dly_tmp = dqs_dly;
+ dqs_coarse_min = dqs_find_min(memc, memsize, COARSE_MIN_START,
+ dqs_coarse_min_limit, 4 + shift,
+ dqs_dly_tmp);
+
+ /* Find minimum DQS fine-grain */
+ dqs_dly_tmp = dqs_dly | (dqs_coarse_min << (4 + shift));
+ test_dqs = dqs_find_min(memc, memsize, FINE_MIN_START,
+ dqs_fine_min_limit, shift, dqs_dly_tmp);
+
+ if (test_dqs == FINE_MIN_START + 1) {
+ dqs_coarse_min++;
+ dqs_fine_min = 0;
+ } else {
+ dqs_fine_min = test_dqs;
+ }
+
+ /* Calculate central DQS coarse/fine value */
+ dqs_coarse_val = (dqs_coarse_max + dqs_coarse_min) >> 1;
+ rem = (dqs_coarse_max + dqs_coarse_min) % 2;
+
+ dqs_fine_val = (rem * 4) + ((dqs_fine_max + dqs_fine_min) >> 1);
+ if (dqs_fine_val >= 0x10) {
+ dqs_coarse_val++;
+ dqs_fine_val -= 8;
+ }
+
+ /* Save current DQS value */
+ dqs_dly |= ((dqs_coarse_val << 4) | dqs_fine_val) << shift;
+ }
+
+ /* Set final DQS value */
+ writel(dqs_dly, memc + MEMCTL_DDR_DQS_DLY_REG);
+
+ /* Restore DDR_CFG2 */
+ writel(ddr_cfg2_reg, memc + MEMCTL_DDR_CFG2_REG);
+
+ /* Enable Self-refresh */
+ setbits_32(memc + MEMCTL_DDR_SELF_REFRESH_REG, SR_AUTO_EN);
+}
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Stefan Roese <sr@denx.de>
- *
- * This code is mostly based on the code extracted from this MediaTek
- * github repository:
- *
- * https://github.com/MediaTek-Labs/linkit-smart-uboot.git
- *
- * I was not able to find a specific license or other developers
- * copyrights here, so I can't add them here.
- *
- * Most functions in this file are copied from the MediaTek U-Boot
- * repository. Without any documentation, it was impossible to really
- * implement this differently. So its mostly a cleaned-up version of
- * the original code, with only support for the MT7628 / MT7688 SoC.
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <linux/io.h>
-#include <asm/cacheops.h>
-#include <asm/io.h>
-#include "mt76xx.h"
-
-#define NUM_OF_CACHELINE 128
-#define MIN_START 6
-#define MIN_FINE_START 0xf
-#define MAX_START 7
-#define MAX_FINE_START 0x0
-
-#define CPU_FRAC_DIV 1
-
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_256MBIT)
-#define DRAM_BUTTOM 0x02000000
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_512MBIT)
-#define DRAM_BUTTOM 0x04000000
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_1024MBIT)
-#define DRAM_BUTTOM 0x08000000
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_2048MBIT)
-#define DRAM_BUTTOM 0x10000000
-#endif
-
-static inline void cal_memcpy(void *src, void *dst, u32 size)
-{
- u8 *psrc = (u8 *)src;
- u8 *pdst = (u8 *)dst;
- int i;
-
- for (i = 0; i < size; i++, psrc++, pdst++)
- *pdst = *psrc;
-}
-
-static inline void cal_memset(void *src, u8 pat, u32 size)
-{
- u8 *psrc = (u8 *)src;
- int i;
-
- for (i = 0; i < size; i++, psrc++)
- *psrc = pat;
-}
-
-#define pref_op(hint, addr) \
- __asm__ __volatile__( \
- ".set push\n" \
- ".set noreorder\n" \
- "pref %0, %1\n" \
- ".set pop\n" \
- : \
- : "i" (hint), "R" (*(u8 *)(addr)))
-
-static inline void cal_patgen(u32 start_addr, u32 size, u32 bias)
-{
- u32 *addr = (u32 *)start_addr;
- int i;
-
- for (i = 0; i < size; i++)
- addr[i] = start_addr + i + bias;
-}
-
-static inline int test_loop(int k, int dqs, u32 test_dqs, u32 *coarse_dqs,
- u32 offs, u32 pat, u32 val)
-{
- u32 nc_addr;
- u32 *c_addr;
- int i;
-
- for (nc_addr = 0xa0000000;
- nc_addr < (0xa0000000 + DRAM_BUTTOM - NUM_OF_CACHELINE * 32);
- nc_addr += (DRAM_BUTTOM >> 6) + offs) {
- writel(0x00007474, (void *)MT76XX_MEMCTRL_BASE + 0x64);
- wmb(); /* Make sure store if finished */
-
- c_addr = (u32 *)(nc_addr & 0xdfffffff);
- cal_memset(((u8 *)c_addr), 0x1F, NUM_OF_CACHELINE * 32);
- cal_patgen(nc_addr, NUM_OF_CACHELINE * 8, pat);
-
- if (dqs > 0)
- writel(0x00000074 |
- (((k == 1) ? coarse_dqs[dqs] : test_dqs) << 12) |
- (((k == 0) ? val : test_dqs) << 8),
- (void *)MT76XX_MEMCTRL_BASE + 0x64);
- else
- writel(0x00007400 |
- (((k == 1) ? coarse_dqs[dqs] : test_dqs) << 4) |
- (((k == 0) ? val : test_dqs) << 0),
- (void *)MT76XX_MEMCTRL_BASE + 0x64);
- wmb(); /* Make sure store if finished */
-
- invalidate_dcache_range((u32)c_addr,
- (u32)c_addr +
- NUM_OF_CACHELINE * 32);
- wmb(); /* Make sure store if finished */
-
- for (i = 0; i < NUM_OF_CACHELINE * 8; i++) {
- if (i % 8 == 0)
- pref_op(0, &c_addr[i]);
- }
-
- for (i = 0; i < NUM_OF_CACHELINE * 8; i++) {
- if (c_addr[i] != nc_addr + i + pat)
- return -1;
- }
- }
-
- return 0;
-}
-
-void ddr_calibrate(void)
-{
- u32 min_coarse_dqs[2];
- u32 max_coarse_dqs[2];
- u32 min_fine_dqs[2];
- u32 max_fine_dqs[2];
- u32 coarse_dqs[2];
- u32 fine_dqs[2];
- int reg = 0, ddr_cfg2_reg;
- int flag;
- int i, k;
- int dqs = 0;
- u32 min_coarse_dqs_bnd, min_fine_dqs_bnd, coarse_dqs_dll, fine_dqs_dll;
- u32 val;
- u32 fdiv = 0, frac = 0;
-
- /* Setup clock to run at full speed */
- val = readl((void *)MT76XX_DYN_CFG0_REG);
- fdiv = (u32)((val >> 8) & 0x0F);
- if (CPU_FRAC_DIV < 1 || CPU_FRAC_DIV > 10)
- frac = val & 0x0f;
- else
- frac = CPU_FRAC_DIV;
-
- while (frac < fdiv) {
- val = readl((void *)MT76XX_DYN_CFG0_REG);
- fdiv = (val >> 8) & 0x0f;
- fdiv--;
- val &= ~(0x0f << 8);
- val |= (fdiv << 8);
- writel(val, (void *)MT76XX_DYN_CFG0_REG);
- udelay(500);
- val = readl((void *)MT76XX_DYN_CFG0_REG);
- fdiv = (val >> 8) & 0x0f;
- }
-
- clrbits_le32((void *)MT76XX_MEMCTRL_BASE + 0x10, BIT(4));
- ddr_cfg2_reg = readl((void *)MT76XX_MEMCTRL_BASE + 0x48);
- clrbits_le32((void *)MT76XX_MEMCTRL_BASE + 0x48,
- (0x3 << 28) | (0x3 << 26));
-
- min_coarse_dqs[0] = MIN_START;
- min_coarse_dqs[1] = MIN_START;
- min_fine_dqs[0] = MIN_FINE_START;
- min_fine_dqs[1] = MIN_FINE_START;
- max_coarse_dqs[0] = MAX_START;
- max_coarse_dqs[1] = MAX_START;
- max_fine_dqs[0] = MAX_FINE_START;
- max_fine_dqs[1] = MAX_FINE_START;
- dqs = 0;
-
- /* Add by KP, DQS MIN boundary */
- reg = readl((void *)MT76XX_MEMCTRL_BASE + 0x20);
- coarse_dqs_dll = (reg & 0xf00) >> 8;
- fine_dqs_dll = (reg & 0xf0) >> 4;
- if (coarse_dqs_dll <= 8)
- min_coarse_dqs_bnd = 8 - coarse_dqs_dll;
- else
- min_coarse_dqs_bnd = 0;
-
- if (fine_dqs_dll <= 8)
- min_fine_dqs_bnd = 8 - fine_dqs_dll;
- else
- min_fine_dqs_bnd = 0;
- /* DQS MIN boundary */
-
-DQS_CAL:
-
- for (k = 0; k < 2; k++) {
- u32 test_dqs;
-
- if (k == 0)
- test_dqs = MAX_START;
- else
- test_dqs = MAX_FINE_START;
-
- do {
- flag = test_loop(k, dqs, test_dqs, max_coarse_dqs,
- 0x400, 0x3, 0xf);
- if (flag == -1)
- break;
-
- test_dqs++;
- } while (test_dqs <= 0xf);
-
- if (k == 0) {
- max_coarse_dqs[dqs] = test_dqs;
- } else {
- test_dqs--;
-
- if (test_dqs == MAX_FINE_START - 1) {
- max_coarse_dqs[dqs]--;
- max_fine_dqs[dqs] = 0xf;
- } else {
- max_fine_dqs[dqs] = test_dqs;
- }
- }
- }
-
- for (k = 0; k < 2; k++) {
- u32 test_dqs;
-
- if (k == 0)
- test_dqs = MIN_START;
- else
- test_dqs = MIN_FINE_START;
-
- do {
- flag = test_loop(k, dqs, test_dqs, min_coarse_dqs,
- 0x480, 0x1, 0x0);
- if (k == 0) {
- if (flag == -1 ||
- test_dqs == min_coarse_dqs_bnd)
- break;
-
- test_dqs--;
-
- if (test_dqs < min_coarse_dqs_bnd)
- break;
- } else {
- if (flag == -1) {
- test_dqs++;
- break;
- } else if (test_dqs == min_fine_dqs_bnd) {
- break;
- }
-
- test_dqs--;
-
- if (test_dqs < min_fine_dqs_bnd)
- break;
- }
- } while (test_dqs >= 0);
-
- if (k == 0) {
- min_coarse_dqs[dqs] = test_dqs;
- } else {
- if (test_dqs == MIN_FINE_START + 1) {
- min_coarse_dqs[dqs]++;
- min_fine_dqs[dqs] = 0x0;
- } else {
- min_fine_dqs[dqs] = test_dqs;
- }
- }
- }
-
- if (dqs == 0) {
- dqs = 1;
- goto DQS_CAL;
- }
-
- for (i = 0; i < 2; i++) {
- u32 temp;
-
- coarse_dqs[i] = (max_coarse_dqs[i] + min_coarse_dqs[i]) >> 1;
- temp =
- (((max_coarse_dqs[i] + min_coarse_dqs[i]) % 2) * 4) +
- ((max_fine_dqs[i] + min_fine_dqs[i]) >> 1);
- if (temp >= 0x10) {
- coarse_dqs[i]++;
- fine_dqs[i] = (temp - 0x10) + 0x8;
- } else {
- fine_dqs[i] = temp;
- }
- }
- reg = (coarse_dqs[1] << 12) | (fine_dqs[1] << 8) |
- (coarse_dqs[0] << 4) | fine_dqs[0];
-
- clrbits_le32((void *)MT76XX_MEMCTRL_BASE + 0x10, BIT(4));
- writel(reg, (void *)MT76XX_MEMCTRL_BASE + 0x64);
- writel(ddr_cfg2_reg, (void *)MT76XX_MEMCTRL_BASE + 0x48);
- setbits_le32((void *)MT76XX_MEMCTRL_BASE + 0x10, BIT(4));
-
- for (i = 0; i < 2; i++)
- debug("[%02X%02X%02X%02X]", min_coarse_dqs[i],
- min_fine_dqs[i], max_coarse_dqs[i], max_fine_dqs[i]);
- debug("\nDDR Calibration DQS reg = %08X\n", reg);
-}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <common.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/sizes.h>
+#include <mach/ddr.h>
+#include <mach/mc.h>
+
+#define DDR_BW_TEST_PAT 0xaa5555aa
+
+static const u32 dram_size[] = {
+ [DRAM_8MB] = SZ_8M,
+ [DRAM_16MB] = SZ_16M,
+ [DRAM_32MB] = SZ_32M,
+ [DRAM_64MB] = SZ_64M,
+ [DRAM_128MB] = SZ_128M,
+ [DRAM_256MB] = SZ_256M,
+};
+
+static void dram_test_write(u32 addr, u32 val)
+{
+ volatile ulong *target = (volatile ulong *)(KSEG1 + addr);
+
+ sync();
+ *target = val;
+ sync();
+}
+
+static u32 dram_test_read(u32 addr)
+{
+ volatile ulong *target = (volatile ulong *)(KSEG1 + addr);
+ u32 val;
+
+ sync();
+ val = *target;
+ sync();
+
+ return val;
+}
+
+static int dram_addr_test_bit(u32 bit)
+{
+ u32 val;
+
+ dram_test_write(0, 0);
+ dram_test_write(BIT(bit), DDR_BW_TEST_PAT);
+ val = dram_test_read(0);
+
+ if (val == DDR_BW_TEST_PAT)
+ return 1;
+
+ return 0;
+}
+
+static void mc_ddr_init(void __iomem *memc, const struct mc_ddr_cfg *cfg,
+ u32 dq_dly, u32 dqs_dly, mc_reset_t mc_reset, u32 bw)
+{
+ u32 val;
+
+ mc_reset(1);
+ __udelay(200);
+ mc_reset(0);
+
+ clrbits_32(memc + MEMCTL_SDRAM_CFG1_REG, RBC_MAPPING);
+
+ writel(cfg->cfg2, memc + MEMCTL_DDR_CFG2_REG);
+ writel(cfg->cfg3, memc + MEMCTL_DDR_CFG3_REG);
+ writel(cfg->cfg4, memc + MEMCTL_DDR_CFG4_REG);
+ writel(dq_dly, memc + MEMCTL_DDR_DQ_DLY_REG);
+ writel(dqs_dly, memc + MEMCTL_DDR_DQS_DLY_REG);
+
+ writel(cfg->cfg0, memc + MEMCTL_DDR_CFG0_REG);
+
+ val = cfg->cfg1;
+ if (bw) {
+ val &= ~IND_SDRAM_WIDTH_M;
+ val |= (bw << IND_SDRAM_WIDTH_S) & IND_SDRAM_WIDTH_M;
+ }
+
+ writel(val, memc + MEMCTL_DDR_CFG1_REG);
+
+ clrsetbits_32(memc + MEMCTL_PWR_SAVE_CNT_REG, SR_TAR_CNT_M,
+ 1 << SR_TAR_CNT_S);
+
+ setbits_32(memc + MEMCTL_DDR_SELF_REFRESH_REG, SR_AUTO_EN);
+}
+
+void ddr1_init(struct mc_ddr_init_param *param)
+{
+ enum mc_dram_size sz;
+ u32 bw = 0;
+
+ /* First initialization, determine bus width */
+ mc_ddr_init(param->memc, ¶m->cfgs[DRAM_8MB], param->dq_dly,
+ param->dqs_dly, param->mc_reset, IND_SDRAM_WIDTH_16BIT);
+
+ /* Test bus width */
+ dram_test_write(0, DDR_BW_TEST_PAT);
+ if (dram_test_read(0) == DDR_BW_TEST_PAT)
+ bw = IND_SDRAM_WIDTH_16BIT;
+ else
+ bw = IND_SDRAM_WIDTH_8BIT;
+
+ /* Second initialization, determine DDR capacity */
+ mc_ddr_init(param->memc, ¶m->cfgs[DRAM_128MB], param->dq_dly,
+ param->dqs_dly, param->mc_reset, bw);
+
+ if (dram_addr_test_bit(9)) {
+ sz = DRAM_8MB;
+ } else {
+ if (dram_addr_test_bit(10)) {
+ if (dram_addr_test_bit(23))
+ sz = DRAM_16MB;
+ else
+ sz = DRAM_32MB;
+ } else {
+ if (dram_addr_test_bit(24))
+ sz = DRAM_64MB;
+ else
+ sz = DRAM_128MB;
+ }
+ }
+
+ /* Final initialization, with DDR calibration */
+ mc_ddr_init(param->memc, ¶m->cfgs[sz], param->dq_dly,
+ param->dqs_dly, param->mc_reset, bw);
+
+ /* Return actual DDR configuration */
+ param->memsize = dram_size[sz];
+ param->bus_width = bw;
+}
+
+void ddr2_init(struct mc_ddr_init_param *param)
+{
+ enum mc_dram_size sz;
+ u32 bw = 0;
+
+ /* First initialization, determine bus width */
+ mc_ddr_init(param->memc, ¶m->cfgs[DRAM_32MB], param->dq_dly,
+ param->dqs_dly, param->mc_reset, IND_SDRAM_WIDTH_16BIT);
+
+ /* Test bus width */
+ dram_test_write(0, DDR_BW_TEST_PAT);
+ if (dram_test_read(0) == DDR_BW_TEST_PAT)
+ bw = IND_SDRAM_WIDTH_16BIT;
+ else
+ bw = IND_SDRAM_WIDTH_8BIT;
+
+ /* Second initialization, determine DDR capacity */
+ mc_ddr_init(param->memc, ¶m->cfgs[DRAM_256MB], param->dq_dly,
+ param->dqs_dly, param->mc_reset, bw);
+
+ if (bw == IND_SDRAM_WIDTH_16BIT) {
+ if (dram_addr_test_bit(10)) {
+ sz = DRAM_32MB;
+ } else {
+ if (dram_addr_test_bit(24)) {
+ if (dram_addr_test_bit(27))
+ sz = DRAM_64MB;
+ else
+ sz = DRAM_128MB;
+ } else {
+ sz = DRAM_256MB;
+ }
+ }
+ } else {
+ if (dram_addr_test_bit(23)) {
+ sz = DRAM_32MB;
+ } else {
+ if (dram_addr_test_bit(24)) {
+ if (dram_addr_test_bit(27))
+ sz = DRAM_64MB;
+ else
+ sz = DRAM_128MB;
+ } else {
+ sz = DRAM_256MB;
+ }
+ }
+ }
+
+ /* Final initialization, with DDR calibration */
+ mc_ddr_init(param->memc, ¶m->cfgs[sz], param->dq_dly,
+ param->dqs_dly, param->mc_reset, bw);
+
+ /* Return actual DDR configuration */
+ param->memsize = dram_size[sz];
+ param->bus_width = bw;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#ifndef _MTMIPS_DDR_H_
+#define _MTMIPS_DDR_H_
+
+#include <linux/io.h>
+#include <linux/types.h>
+
+enum mc_dram_size {
+ DRAM_8MB,
+ DRAM_16MB,
+ DRAM_32MB,
+ DRAM_64MB,
+ DRAM_128MB,
+ DRAM_256MB,
+
+ __DRAM_SZ_MAX
+};
+
+struct mc_ddr_cfg {
+ u32 cfg0;
+ u32 cfg1;
+ u32 cfg2;
+ u32 cfg3;
+ u32 cfg4;
+};
+
+typedef void (*mc_reset_t)(int assert);
+
+struct mc_ddr_init_param {
+ void __iomem *memc;
+
+ u32 dq_dly;
+ u32 dqs_dly;
+
+ const struct mc_ddr_cfg *cfgs;
+ mc_reset_t mc_reset;
+
+ u32 memsize;
+ u32 bus_width;
+};
+
+void ddr1_init(struct mc_ddr_init_param *param);
+void ddr2_init(struct mc_ddr_init_param *param);
+void ddr_calibrate(void __iomem *memc, u32 memsize, u32 bw);
+
+#endif /* _MTMIPS_DDR_H_ */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#ifndef _MTMIPS_MC_H_
+#define _MTMIPS_MC_H_
+
+#define MEMCTL_SDRAM_CFG0_REG 0x00
+#define DIS_CLK_GT 0x80000000
+#define CLK_SLEW_S 29
+#define CLK_SLEW_M 0x60000000
+#define TWR 0x10000000
+#define TMRD_S 24
+#define TMRD_M 0xf000000
+#define TRFC_S 20
+#define TRFC_M 0xf00000
+#define TCAS_S 16
+#define TCAS_M 0x30000
+#define TRAS_S 12
+#define TRAS_M 0xf000
+#define TRCD_S 8
+#define TRCD_M 0x300
+#define TRC_S 4
+#define TRC_M 0xf0
+#define TRP_S 0
+#define TRP_M 0x03
+
+#define MEMCTL_SDRAM_CFG1_REG 0x04
+#define SDRAM_INIT_START 0x80000000
+#define SDRAM_INIT_DONE 0x40000000
+#define RBC_MAPPING 0x20000000
+#define PWR_DOWN_EN 0x10000000
+#define PWR_DOWN_MODE 0x8000000
+#define SDRAM_WIDTH 0x1000000
+#define NUMCOLS_S 20
+#define NUMCOLS_M 0x300000
+#define NUMROWS_S 16
+#define NUMROWS_M 0x30000
+#define TREFR_S 0
+#define TREFR_M 0xffff
+
+#define MEMCTL_DDR_SELF_REFRESH_REG 0x10
+#define ODT_SRC_SEL_S 24
+#define ODT_SRC_SEL_M 0xf000000
+#define ODT_OFF_DLY_S 20
+#define ODT_OFF_DLY_M 0xf00000
+#define ODT_ON_DLY_S 16
+#define ODT_ON_DLY_M 0xf0000
+#define SR_AUTO_EN 0x10
+#define SRACK_B 0x02
+#define SRREQ_B 0x01
+
+#define MEMCTL_PWR_SAVE_CNT_REG 0x14
+#define PD_CNT_S 24
+#define PD_CNT_M 0xff000000
+#define SR_TAR_CNT_S 0
+#define SR_TAR_CNT_M 0xffffff
+
+#define MEMCTL_DLL_DBG_REG 0x20
+#define TDC_STABLE_S 12
+#define TDC_STABLE_M 0x3f000
+#define MST_DLY_SEL_S 4
+#define MST_DLY_SEL_M 0xff0
+#define CURR_STATE_S 1
+#define CURR_STATE_M 0x06
+#define ADLL_LOCK_DONE 0x01
+
+#define MEMCTL_DDR_CFG0_REG 0x40
+#define T_RRD_S 28
+#define T_RRD_M 0xf0000000
+#define T_RAS_S 23
+#define T_RAS_M 0xf800000
+#define T_RP_S 19
+#define T_RP_M 0x780000
+#define T_RFC_S 13
+#define T_RFC_M 0x7e000
+#define T_REFI_S 0
+#define T_REFI_M 0x1fff
+
+#define MEMCTL_DDR_CFG1_REG 0x44
+#define T_WTR_S 28
+#define T_WTR_M 0xf0000000
+#define T_RTP_S 24
+#define T_RTP_M 0xf000000
+#define USER_DATA_WIDTH 0x200000
+#define IND_SDRAM_SIZE_S 18
+#define IND_SDRAM_SIZE_M 0x1c0000
+#define IND_SDRAM_SIZE_8MB 1
+#define IND_SDRAM_SIZE_16MB 2
+#define IND_SDRAM_SIZE_32MB 3
+#define IND_SDRAM_SIZE_64MB 4
+#define IND_SDRAM_SIZE_128MB 5
+#define IND_SDRAM_SIZE_256MB 6
+#define IND_SDRAM_WIDTH_S 16
+#define IND_SDRAM_WIDTH_M 0x30000
+#define IND_SDRAM_WIDTH_8BIT 1
+#define IND_SDRAM_WIDTH_16BIT 2
+#define EXT_BANK_S 14
+#define EXT_BANK_M 0xc000
+#define TOTAL_SDRAM_WIDTH_S 12
+#define TOTAL_SDRAM_WIDTH_M 0x3000
+#define T_WR_S 8
+#define T_WR_M 0xf00
+#define T_MRD_S 4
+#define T_MRD_M 0xf0
+#define T_RCD_S 0
+#define T_RCD_M 0x0f
+
+#define MEMCTL_DDR_CFG2_REG 0x48
+#define REGE 0x80000000
+#define DDR2_MODE 0x40000000
+#define DQS0_GATING_WINDOW_S 28
+#define DQS0_GATING_WINDOW_M 0x30000000
+#define DQS1_GATING_WINDOW_S 26
+#define DQS1_GATING_WINDOW_M 0xc000000
+#define PD 0x1000
+#define WR_S 9
+#define WR_M 0xe00
+#define DLLRESET 0x100
+#define TESTMODE 0x80
+#define CAS_LATENCY_S 4
+#define CAS_LATENCY_M 0x70
+#define BURST_TYPE 0x08
+#define BURST_LENGTH_S 0
+#define BURST_LENGTH_M 0x07
+
+#define MEMCTL_DDR_CFG3_REG 0x4c
+#define Q_OFF 0x1000
+#define RDOS 0x800
+#define DIS_DIFF_DQS 0x400
+#define OCD_S 7
+#define OCD_M 0x380
+#define RTT1 0x40
+#define ADDITIVE_LATENCY_S 3
+#define ADDITIVE_LATENCY_M 0x38
+#define RTT0 0x04
+#define DS 0x02
+#define DLL 0x01
+
+#define MEMCTL_DDR_CFG4_REG 0x50
+#define FAW_S 0
+#define FAW_M 0x0f
+
+#define MEMCTL_DDR_DQ_DLY_REG 0x60
+#define DQ1_DELAY_SEL_S 24
+#define DQ1_DELAY_SEL_M 0xff000000
+#define DQ0_DELAY_SEL_S 16
+#define DQ0_DELAY_SEL_M 0xff0000
+#define DQ1_DELAY_COARSE_TUNING_S 12
+#define DQ1_DELAY_COARSE_TUNING_M 0xf000
+#define DQ1_DELAY_FINE_TUNING_S 8
+#define DQ1_DELAY_FINE_TUNING_M 0xf00
+#define DQ0_DELAY_COARSE_TUNING_S 4
+#define DQ0_DELAY_COARSE_TUNING_M 0xf0
+#define DQ0_DELAY_FINE_TUNING_S 0
+#define DQ0_DELAY_FINE_TUNING_M 0x0f
+
+#define MEMCTL_DDR_DQS_DLY_REG 0x64
+#define DQS1_DELAY_SEL_S 24
+#define DQS1_DELAY_SEL_M 0xff000000
+#define DQS0_DELAY_SEL_S 16
+#define DQS0_DELAY_SEL_M 0xff0000
+#define DQS1_DELAY_COARSE_TUNING_S 12
+#define DQS1_DELAY_COARSE_TUNING_M 0xf000
+#define DQS1_DELAY_FINE_TUNING_S 8
+#define DQS1_DELAY_FINE_TUNING_M 0xf00
+#define DQS0_DELAY_COARSE_TUNING_S 4
+#define DQS0_DELAY_COARSE_TUNING_M 0xf0
+#define DQS0_DELAY_FINE_TUNING_S 0
+#define DQS0_DELAY_FINE_TUNING_M 0x0f
+
+#define MEMCTL_DDR_DLL_SLV_REG 0x68
+#define DLL_SLV_UPDATE_MODE 0x100
+#define DQS_DLY_SEL_EN 0x80
+#define DQ_DLY_SEL_EN 0x01
+
+#endif /* _MTMIPS_MC_H_ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (c) 2018 Stefan Roese <sr@denx.de>
- *
- * This code is mostly based on the code extracted from this MediaTek
- * github repository:
- *
- * https://github.com/MediaTek-Labs/linkit-smart-uboot.git
- *
- * I was not able to find a specific license or other developers
- * copyrights here, so I can't add them here.
- */
-
-#include <config.h>
-#include <asm/regdef.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/asm.h>
-#include "mt76xx.h"
-
-#ifndef BIT
-#define BIT(nr) (1 << (nr))
-#endif
-
-#define DELAY_USEC(us) ((us) / 100)
-
-#define DDR_CFG1_CHIP_WIDTH_MASK (0x3 << 16)
-#define DDR_CFG1_BUS_WIDTH_MASK (0x3 << 12)
-
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_256MBIT)
-#define DDR_CFG1_SIZE_VAL 0x222e2323
-#define DDR_CFG4_SIZE_VAL 7
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_512MBIT)
-#define DDR_CFG1_SIZE_VAL 0x22322323
-#define DDR_CFG4_SIZE_VAL 9
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_1024MBIT)
-#define DDR_CFG1_SIZE_VAL 0x22362323
-#define DDR_CFG4_SIZE_VAL 9
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_SIZE_2048MBIT)
-#define DDR_CFG1_SIZE_VAL 0x223a2323
-#define DDR_CFG4_SIZE_VAL 9
-#endif
-
-#if defined(CONFIG_ONBOARD_DDR2_CHIP_WIDTH_8BIT)
-#define DDR_CFG1_CHIP_WIDTH_VAL (0x1 << 16)
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT)
-#define DDR_CFG1_CHIP_WIDTH_VAL (0x2 << 16)
-#endif
-
-#if defined(CONFIG_ONBOARD_DDR2_BUS_WIDTH_16BIT)
-#define DDR_CFG1_BUS_WIDTH_VAL (0x2 << 12)
-#endif
-#if defined(CONFIG_ONBOARD_DDR2_BUS_WIDTH_32BIT)
-#define DDR_CFG1_BUS_WIDTH_VAL (0x3 << 12)
-#endif
-
- .set noreorder
-
-LEAF(lowlevel_init)
-
- /* Load base addresses as physical addresses for later usage */
- li s0, CKSEG1ADDR(MT76XX_SYSCTL_BASE)
- li s1, CKSEG1ADDR(MT76XX_MEMCTRL_BASE)
- li s2, CKSEG1ADDR(MT76XX_RGCTRL_BASE)
-
- /* polling CPLL is ready */
- li t1, DELAY_USEC(1000000)
- la t5, MT76XX_ROM_STATUS_REG
-1:
- lw t2, 0(t5)
- andi t2, t2, 0x1
- bnez t2, CPLL_READY
- subu t1, t1, 1
- bgtz t1, 1b
- nop
- la t0, MT76XX_CLKCFG0_REG
- lw t3, 0(t0)
- ori t3, t3, 0x1
- sw t3, 0(t0)
- b CPLL_DONE
- nop
-CPLL_READY:
- la t0, MT76XX_CLKCFG0_REG
- lw t1, 0(t0)
- li t2, ~0x0c
- and t1, t1, t2
- ori t1, t1, 0xc
- sw t1, 0(t0)
- la t0, MT76XX_DYN_CFG0_REG
- lw t3, 0(t0)
- li t5, ~((0x0f << 8) | (0x0f << 0))
- and t3, t3, t5
- li t5, (10 << 8) | (1 << 0)
- or t3, t3, t5
- sw t3, 0(t0)
- la t0, MT76XX_CLKCFG0_REG
- lw t3, 0(t0)
- li t4, ~0x0F
- and t3, t3, t4
- ori t3, t3, 0xc
- sw t3, 0(t0)
- lw t3, 0(t0)
- ori t3, t3, 0x08
- sw t3, 0(t0)
-
-CPLL_DONE:
- /* Reset MC */
- lw t2, 0x34(s0)
- ori t2, BIT(10)
- sw t2, 0x34(s0)
- nop
-
- /*
- * SDR and DDR initialization: delay 200us
- */
- li t0, DELAY_USEC(200 + 40)
- li t1, 0x1
-1:
- sub t0, t0, t1
- bnez t0, 1b
- nop
-
- /* set DRAM IO PAD for MT7628IC */
- /* DDR LDO Enable */
- lw t4, 0x100(s2)
- li t2, BIT(31)
- or t4, t4, t2
- sw t4, 0x100(s2)
- lw t4, 0x10c(s2)
- j LDO_1P8V
- nop
-LDO_1P8V:
- li t2, ~BIT(6)
- and t4, t4, t2
- sw t4, 0x10c(s2)
- j DDRLDO_SOFT_START
-LDO_2P5V:
- /* suppose external DDR1 LDO 2.5V */
- li t2, BIT(6)
- or t4, t4, t2
- sw t4, 0x10c(s2)
-
-DDRLDO_SOFT_START:
- lw t2, 0x10c(s2)
- li t3, BIT(16)
- or t2, t2, t3
- sw t2, 0x10c(s2)
- li t3, DELAY_USEC(250*50)
-LDO_DELAY:
- subu t3, t3, 1
- bnez t3, LDO_DELAY
- nop
-
- lw t2, 0x10c(s2)
- li t3, BIT(18)
- or t2, t2, t3
- sw t2, 0x10c(s2)
-
-SET_RG_BUCK_FPWM:
- lw t2, 0x104(s2)
- ori t2, t2, BIT(10)
- sw t2, 0x104(s2)
-
-DDR_PAD_CFG:
- /* clean CLK PAD */
- lw t2, 0x704(s2)
- li t8, 0xfffff0f0
- and t2, t2, t8
- /* clean CMD PAD */
- lw t3, 0x70c(s2)
- li t8, 0xfffff0f0
- and t3, t3, t8
- /* clean DQ IPAD */
- lw t4, 0x710(s2)
- li t8, 0xfffff8ff
- and t4, t4, t8
- /* clean DQ OPAD */
- lw t5, 0x714(s2)
- li t8, 0xfffff0f0
- and t5, t5, t8
- /* clean DQS IPAD */
- lw t6, 0x718(s2)
- li t8, 0xfffff8ff
- and t6, t6, t8
- /* clean DQS OPAD */
- lw t7, 0x71c(s2)
- li t8, 0xfffff0f0
- and t7, t7, t8
-
- lw t9, 0xc(s0)
- srl t9, t9, 16
- andi t9, t9, 0x1
- bnez t9, MT7628_AN_DDR1_PAD
-MT7628_KN_PAD:
- li t8, 0x00000303
- or t2, t2, t8
- or t3, t3, t8
- or t5, t5, t8
- or t7, t7, t8
- li t8, 0x00000000
- or t4, t4, t8
- or t6, t6, t8
- j SET_PAD_CFG
-MT7628_AN_DDR1_PAD:
- lw t1, 0x10(s0)
- andi t1, t1, 0x1
- beqz t1, MT7628_AN_DDR2_PAD
- li t8, 0x00000c0c
- or t2, t2, t8
- li t8, 0x00000202
- or t3, t3, t8
- li t8, 0x00000707
- or t5, t5, t8
- li t8, 0x00000c0c
- or t7, t7, t8
- li t8, 0x00000000
- or t4, t4, t8
- or t6, t6, t8
- j SET_PAD_CFG
-MT7628_AN_DDR2_PAD:
- li t8, 0x00000c0c
- or t2, t2, t8
- li t8, 0x00000202
- or t3, t3, t8
- li t8, 0x00000404
- or t5, t5, t8
- li t8, 0x00000c0c
- or t7, t7, t8
- li t8, 0x00000000 /* ODT off */
- or t4, t4, t8
- or t6, t6, t8
-
-SET_PAD_CFG:
- sw t2, 0x704(s2)
- sw t3, 0x70c(s2)
- sw t4, 0x710(s2)
- sw t5, 0x714(s2)
- sw t6, 0x718(s2)
- sw t7, 0x71c(s2)
-
- /*
- * DDR initialization: reset pin to 0
- */
- lw t2, 0x34(s0)
- and t2, ~BIT(10)
- sw t2, 0x34(s0)
- nop
-
- /*
- * DDR initialization: wait til reg DDR_CFG1 bit 21 equal to 1 (ready)
- */
-DDR_READY:
- li t1, DDR_CFG1_REG
- lw t0, 0(t1)
- nop
- and t2, t0, BIT(21)
- beqz t2, DDR_READY
- nop
-
- /*
- * DDR initialization
- *
- * Only DDR2 supported right now. DDR2 support can be added, once
- * boards using it will get added to mainline U-Boot.
- */
- li t1, DDR_CFG2_REG
- lw t0, 0(t1)
- nop
- and t0, ~BIT(30)
- and t0, ~(7 << 4)
- or t0, (4 << 4)
- or t0, BIT(30)
- or t0, BIT(11)
- sw t0, 0(t1)
- nop
-
- li t1, DDR_CFG3_REG
- lw t2, 0(t1)
- /* Disable ODT; reference board ok, ev board fail */
- and t2, ~BIT(6)
- or t2, BIT(2)
- li t0, DDR_CFG4_REG
- lw t1, 0(t0)
- li t2, ~(0x01f | 0x0f0)
- and t1, t1, t2
- ori t1, t1, DDR_CFG4_SIZE_VAL
- sw t1, 0(t0)
- nop
-
- /*
- * DDR initialization: config size and width on reg DDR_CFG1
- */
- li t6, DDR_CFG1_SIZE_VAL
-
- and t6, ~DDR_CFG1_CHIP_WIDTH_MASK
- or t6, DDR_CFG1_CHIP_WIDTH_VAL
-
- /* CONFIG DDR_CFG1[13:12] about TOTAL WIDTH */
- and t6, ~DDR_CFG1_BUS_WIDTH_MASK
- or t6, DDR_CFG1_BUS_WIDTH_VAL
-
- li t5, DDR_CFG1_REG
- sw t6, 0(t5)
- nop
-
- /*
- * DDR: enable self auto refresh for power saving
- * enable it by default for both RAM and ROM version (for CoC)
- */
- lw t1, 0x14(s1)
- nop
- and t1, 0xff000000
- or t1, 0x01
- sw t1, 0x14(s1)
- nop
- lw t1, 0x10(s1)
- nop
- or t1, 0x10
- sw t1, 0x10(s1)
- nop
-
- jr ra
- nop
- END(lowlevel_init)
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+
+obj-y += lowlevel_init.o
+obj-y += init.o
+obj-y += ddr.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <common.h>
+#include <asm/addrspace.h>
+#include <linux/bitops.h>
+#include <linux/sizes.h>
+#include <linux/io.h>
+#include <mach/ddr.h>
+#include <mach/mc.h>
+#include "mt7628.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* DDR2 DQ_DLY */
+#define DDR2_DQ_DLY \
+ ((0x8 << DQ1_DELAY_COARSE_TUNING_S) | \
+ (0x2 << DQ1_DELAY_FINE_TUNING_S) | \
+ (0x8 << DQ0_DELAY_COARSE_TUNING_S) | \
+ (0x2 << DQ0_DELAY_FINE_TUNING_S))
+
+/* DDR2 DQS_DLY */
+#define DDR2_DQS_DLY \
+ ((0x8 << DQS1_DELAY_COARSE_TUNING_S) | \
+ (0x3 << DQS1_DELAY_FINE_TUNING_S) | \
+ (0x8 << DQS0_DELAY_COARSE_TUNING_S) | \
+ (0x3 << DQS0_DELAY_FINE_TUNING_S))
+
+const struct mc_ddr_cfg ddr1_cfgs_200mhz[] = {
+ [DRAM_8MB] = { 0x34A1EB94, 0x20262324, 0x28000033, 0x00000002, 0x00000000 },
+ [DRAM_16MB] = { 0x34A1EB94, 0x202A2324, 0x28000033, 0x00000002, 0x00000000 },
+ [DRAM_32MB] = { 0x34A1E5CA, 0x202E2324, 0x28000033, 0x00000002, 0x00000000 },
+ [DRAM_64MB] = { 0x3421E5CA, 0x20322324, 0x28000033, 0x00000002, 0x00000000 },
+ [DRAM_128MB] = { 0x241B05CA, 0x20362334, 0x28000033, 0x00000002, 0x00000000 },
+};
+
+const struct mc_ddr_cfg ddr1_cfgs_160mhz[] = {
+ [DRAM_8MB] = { 0x239964A1, 0x20262323, 0x00000033, 0x00000002, 0x00000000 },
+ [DRAM_16MB] = { 0x239964A1, 0x202A2323, 0x00000033, 0x00000002, 0x00000000 },
+ [DRAM_32MB] = { 0x239964A1, 0x202E2323, 0x00000033, 0x00000002, 0x00000000 },
+ [DRAM_64MB] = { 0x239984A1, 0x20322323, 0x00000033, 0x00000002, 0x00000000 },
+ [DRAM_128MB] = { 0x239AB4A1, 0x20362333, 0x00000033, 0x00000002, 0x00000000 },
+};
+
+const struct mc_ddr_cfg ddr2_cfgs_200mhz[] = {
+ [DRAM_32MB] = { 0x2519E2E5, 0x222E2323, 0x68000C43, 0x00000452, 0x0000000A },
+ [DRAM_64MB] = { 0x249AA2E5, 0x22322323, 0x68000C43, 0x00000452, 0x0000000A },
+ [DRAM_128MB] = { 0x249B42E5, 0x22362323, 0x68000C43, 0x00000452, 0x0000000A },
+ [DRAM_256MB] = { 0x249CE2E5, 0x223A2323, 0x68000C43, 0x00000452, 0x0000000A },
+};
+
+const struct mc_ddr_cfg ddr2_cfgs_160mhz[] = {
+ [DRAM_32MB] = { 0x23918250, 0x222E2322, 0x40000A43, 0x00000452, 0x00000006 },
+ [DRAM_64MB] = { 0x239A2250, 0x22322322, 0x40000A43, 0x00000452, 0x00000008 },
+ [DRAM_128MB] = { 0x2392A250, 0x22362322, 0x40000A43, 0x00000452, 0x00000008 },
+ [DRAM_256MB] = { 0x24140250, 0x223A2322, 0x40000A43, 0x00000452, 0x00000008 },
+};
+
+static void mt7628_memc_reset(int assert)
+{
+ void __iomem *sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
+
+ if (assert)
+ setbits_32(sysc + SYSCTL_RSTCTL_REG, MC_RST);
+ else
+ clrbits_32(sysc + SYSCTL_RSTCTL_REG, MC_RST);
+}
+
+static void mt7628_ddr_pad_ldo_config(int ddr_type, int pkg_type)
+{
+ void __iomem *rgc = ioremap_nocache(RGCTL_BASE, RGCTL_SIZE);
+ u32 ck_pad1, cmd_pad1, dq_pad0, dq_pad1, dqs_pad0, dqs_pad1;
+
+ setbits_32(rgc + RGCTL_PMU_G0_REG, PMU_CFG_EN);
+
+ if (ddr_type == DRAM_DDR1)
+ setbits_32(rgc + RGCTL_PMU_G3_REG, RG_DDRLDO_VOSEL);
+ else
+ clrbits_32(rgc + RGCTL_PMU_G3_REG, RG_DDRLDO_VOSEL);
+
+ setbits_32(rgc + RGCTL_PMU_G3_REG, NI_DDRLDO_EN);
+
+ __udelay(250 * 50);
+
+ setbits_32(rgc + RGCTL_PMU_G3_REG, NI_DDRLDO_STB);
+ setbits_32(rgc + RGCTL_PMU_G1_REG, RG_BUCK_FPWM);
+
+ ck_pad1 = readl(rgc + RGCTL_DDR_PAD_CK_G1_REG);
+ cmd_pad1 = readl(rgc + RGCTL_DDR_PAD_CMD_G1_REG);
+ dq_pad0 = readl(rgc + RGCTL_DDR_PAD_DQ_G0_REG);
+ dq_pad1 = readl(rgc + RGCTL_DDR_PAD_DQ_G1_REG);
+ dqs_pad0 = readl(rgc + RGCTL_DDR_PAD_DQS_G0_REG);
+ dqs_pad1 = readl(rgc + RGCTL_DDR_PAD_DQS_G1_REG);
+
+ ck_pad1 &= ~(DRVP_M | DRVN_M);
+ cmd_pad1 &= ~(DRVP_M | DRVN_M);
+ dq_pad0 &= ~RTT_M;
+ dq_pad1 &= ~(DRVP_M | DRVN_M);
+ dqs_pad0 &= ~RTT_M;
+ dqs_pad1 &= ~(DRVP_M | DRVN_M);
+
+ if (pkg_type == PKG_ID_KN) {
+ ck_pad1 |= (3 << DRVP_S) | (3 << DRVN_S);
+ cmd_pad1 |= (3 << DRVP_S) | (3 << DRVN_S);
+ dq_pad1 |= (3 << DRVP_S) | (3 << DRVN_S);
+ dqs_pad1 |= (3 << DRVP_S) | (3 << DRVN_S);
+ } else {
+ ck_pad1 |= (12 << DRVP_S) | (12 << DRVN_S);
+ cmd_pad1 |= (2 << DRVP_S) | (2 << DRVN_S);
+ dqs_pad1 |= (12 << DRVP_S) | (12 << DRVN_S);
+ if (ddr_type == DRAM_DDR1)
+ dq_pad1 |= (7 << DRVP_S) | (7 << DRVN_S);
+ else
+ dq_pad1 |= (4 << DRVP_S) | (4 << DRVN_S);
+ }
+
+ writel(ck_pad1, rgc + RGCTL_DDR_PAD_CK_G1_REG);
+ writel(cmd_pad1, rgc + RGCTL_DDR_PAD_CMD_G1_REG);
+ writel(dq_pad0, rgc + RGCTL_DDR_PAD_DQ_G0_REG);
+ writel(dq_pad1, rgc + RGCTL_DDR_PAD_DQ_G1_REG);
+ writel(dqs_pad0, rgc + RGCTL_DDR_PAD_DQS_G0_REG);
+ writel(dqs_pad1, rgc + RGCTL_DDR_PAD_DQS_G1_REG);
+}
+
+void mt7628_ddr_init(void)
+{
+ void __iomem *sysc;
+ int ddr_type, pkg_type, lspd;
+ struct mc_ddr_init_param param;
+
+ sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
+ ddr_type = readl(sysc + SYSCTL_SYSCFG0_REG) & DRAM_TYPE;
+ pkg_type = !!(readl(sysc + SYSCTL_CHIP_REV_ID_REG) & PKG_ID);
+ lspd = readl(sysc + SYSCTL_CLKCFG0_REG) &
+ (CPU_PLL_FROM_BBP | CPU_PLL_FROM_XTAL);
+
+ mt7628_memc_reset(1);
+ __udelay(200);
+
+ mt7628_ddr_pad_ldo_config(ddr_type, pkg_type);
+
+ param.memc = ioremap_nocache(MEMCTL_BASE, MEMCTL_SIZE);
+ param.dq_dly = DDR2_DQ_DLY;
+ param.dqs_dly = DDR2_DQS_DLY;
+ param.mc_reset = mt7628_memc_reset;
+ param.memsize = 0;
+ param.bus_width = 0;
+
+ if (pkg_type == PKG_ID_KN)
+ ddr_type = DRAM_DDR1;
+
+ if (ddr_type == DRAM_DDR1) {
+ if (lspd)
+ param.cfgs = ddr1_cfgs_160mhz;
+ else
+ param.cfgs = ddr1_cfgs_200mhz;
+ ddr1_init(¶m);
+ } else {
+ if (lspd)
+ param.cfgs = ddr2_cfgs_160mhz;
+ else
+ param.cfgs = ddr2_cfgs_200mhz;
+ ddr2_init(¶m);
+ }
+
+ ddr_calibrate(param.memc, param.memsize, param.bus_width);
+
+ gd->ram_size = param.memsize;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <dm/uclass.h>
+#include <dt-bindings/clock/mt7628-clk.h>
+#include <linux/io.h>
+#include "mt7628.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void set_init_timer_freq(void)
+{
+ void __iomem *sysc;
+ u32 bs, val, timer_freq_post;
+
+ sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
+
+ /* We can't use the clk driver as the DM has not been initialized yet */
+ bs = readl(sysc + SYSCTL_SYSCFG0_REG);
+ if ((bs & XTAL_FREQ_SEL) == XTAL_25MHZ) {
+ gd->arch.timer_freq = 25000000;
+ timer_freq_post = 575000000;
+ } else {
+ gd->arch.timer_freq = 40000000;
+ timer_freq_post = 580000000;
+ }
+
+ val = readl(sysc + SYSCTL_CLKCFG0_REG);
+ if (!(val & (CPU_PLL_FROM_BBP | CPU_PLL_FROM_XTAL)))
+ gd->arch.timer_freq = timer_freq_post;
+}
+
+void mt7628_init(void)
+{
+ set_init_timer_freq();
+
+ mt7628_ddr_init();
+}
+
+int print_cpuinfo(void)
+{
+ void __iomem *sysc;
+ struct udevice *clkdev;
+ u32 val, ver, eco, pkg, ddr, chipmode, ee;
+ ulong cpu_clk, bus_clk, xtal_clk, timer_freq;
+ struct clk clk;
+ int ret;
+
+ sysc = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
+
+ val = readl(sysc + SYSCTL_CHIP_REV_ID_REG);
+ ver = (val & VER_M) >> VER_S;
+ eco = (val & ECO_M) >> ECO_S;
+ pkg = !!(val & PKG_ID);
+
+ val = readl(sysc + SYSCTL_SYSCFG0_REG);
+ ddr = val & DRAM_TYPE;
+ chipmode = (val & CHIP_MODE_M) >> CHIP_MODE_S;
+
+ val = readl(sysc + SYSCTL_EFUSE_CFG_REG);
+ ee = val & EFUSE_MT7688;
+
+ printf("CPU: MediaTek MT%u%c ver:%u eco:%u\n",
+ ee ? 7688 : 7628, pkg ? 'A' : 'K', ver, eco);
+
+ printf("Boot: DDR%s, SPI-NOR %u-Byte Addr, CPU clock from %s\n",
+ ddr ? "" : "2", chipmode & 0x01 ? 4 : 3,
+ chipmode & 0x02 ? "XTAL" : "CPLL");
+
+ ret = uclass_get_device_by_driver(UCLASS_CLK, DM_GET_DRIVER(mt7628_clk),
+ &clkdev);
+ if (ret)
+ return ret;
+
+ clk.dev = clkdev;
+
+ clk.id = CLK_CPU;
+ cpu_clk = clk_get_rate(&clk);
+
+ clk.id = CLK_SYS;
+ bus_clk = clk_get_rate(&clk);
+
+ clk.id = CLK_XTAL;
+ xtal_clk = clk_get_rate(&clk);
+
+ clk.id = CLK_MIPS_CNT;
+ timer_freq = clk_get_rate(&clk);
+
+ /* Set final timer frequency */
+ if (timer_freq)
+ gd->arch.timer_freq = timer_freq;
+
+ printf("Clock: CPU: %luMHz, Bus: %luMHz, XTAL: %luMHz\n",
+ cpu_clk / 1000000, bus_clk / 1000000, xtal_clk / 1000000);
+
+ return 0;
+}
+
+ulong notrace get_tbclk(void)
+{
+ return gd->arch.timer_freq;
+}
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <config.h>
+#include <asm-offsets.h>
+#include <asm/cacheops.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/asm.h>
+#include "mt7628.h"
+
+/* Set temporary stack address range */
+#ifndef CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_SP_OFFSET)
+#endif
+
+#define CACHE_STACK_SIZE 0x4000
+#define CACHE_STACK_BASE (CONFIG_SYS_INIT_SP_ADDR - CACHE_STACK_SIZE)
+
+#define DELAY_USEC(us) ((58 * (us)) / 3)
+
+ .set noreorder
+
+LEAF(mips_sram_init)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ /* Setup CPU PLL */
+ li t0, DELAY_USEC(1000000)
+ li t1, KSEG1ADDR(SYSCTL_BASE + SYSCTL_ROM_STATUS_REG)
+ li t2, KSEG1ADDR(SYSCTL_BASE + SYSCTL_CLKCFG0_REG)
+
+_check_rom_status:
+ lw t3, 0(t1)
+ andi t3, t3, 1
+ bnez t3, _rom_normal
+ subu t0, t0, 1
+ bnez t0, _check_rom_status
+ nop
+
+ lw t3, 0(t2)
+ ori t3, (CPU_PLL_FROM_BBP | CPU_PLL_FROM_XTAL)
+ xori t3, CPU_PLL_FROM_BBP
+ b _cpu_pll_done
+ nop
+
+_rom_normal:
+ lw t3, 0(t2)
+ ori t3, (CPU_PLL_FROM_BBP | CPU_PLL_FROM_XTAL | \
+ DIS_BBP_SLEEP | EN_BBP_CLK)
+ xori t3, (CPU_PLL_FROM_BBP | CPU_PLL_FROM_XTAL)
+
+_cpu_pll_done:
+ sw t3, 0(t2)
+
+ li t2, KSEG1ADDR(RBUSCTL_BASE + RBUSCTL_DYN_CFG0_REG)
+ lw t3, 0(t2)
+ ori t3, t3, (CPU_FDIV_M | CPU_FFRAC_M)
+ xori t3, t3, (CPU_FDIV_M | CPU_FFRAC_M)
+ ori t3, t3, ((1 << CPU_FDIV_S) | (1 << CPU_FFRAC_S))
+ sw t3, 0(t2)
+
+ /* Clear WST & SPR bits in ErrCtl */
+ mfc0 t0, CP0_ECC
+ ins t0, zero, 30, 2
+ mtc0 t0, CP0_ECC
+ ehb
+
+ /* Simply initialize I-Cache */
+ li a0, 0
+ li a1, CONFIG_SYS_ICACHE_SIZE
+
+ mtc0 zero, CP0_TAGLO /* Zero to DDataLo */
+
+1: cache INDEX_STORE_TAG_I, 0(a0)
+ addiu a0, CONFIG_SYS_ICACHE_LINE_SIZE
+ bne a0, a1, 1b
+ nop
+
+ /* Simply initialize D-Cache */
+ li a0, 0
+ li a1, CONFIG_SYS_DCACHE_SIZE
+
+ mtc0 zero, CP0_TAGLO, 2
+
+2: cache INDEX_STORE_TAG_D, 0(a0)
+ addiu a0, CONFIG_SYS_DCACHE_LINE_SIZE
+ bne a0, a1, 2b
+ nop
+
+ /* Set KSEG0 Cachable */
+ mfc0 t0, CP0_CONFIG
+ and t0, t0, MIPS_CONF_IMPL
+ or t0, t0, CONF_CM_CACHABLE_NONCOHERENT
+ mtc0 t0, CP0_CONFIG
+ ehb
+
+ /* Lock D-Cache */
+ PTR_LI a0, CACHE_STACK_BASE /* D-Cache lock base */
+ li a1, CACHE_STACK_SIZE /* D-Cache lock size */
+ li a2, 0x1ffff800 /* Mask of DTagLo[PTagLo] */
+
+3:
+ /* Lock one cacheline */
+ and t0, a0, a2
+ ori t0, 0xe0 /* Valid & Dirty & Lock bits */
+ mtc0 t0, CP0_TAGLO, 2 /* Write to DTagLo */
+ ehb
+ cache INDEX_STORE_TAG_D, 0(a0)
+
+ addiu a0, CONFIG_SYS_DCACHE_LINE_SIZE
+ sub a1, CONFIG_SYS_DCACHE_LINE_SIZE
+ bnez a1, 3b
+ nop
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+ jr ra
+ nop
+ END(mips_sram_init)
+
+NESTED(lowlevel_init, 0, ra)
+ /* Save ra and do real lowlevel initialization */
+ move s0, ra
+
+ PTR_LA t9, mt7628_init
+ jalr t9
+ nop
+
+ move ra, s0
+
+#if CONFIG_IS_ENABLED(INIT_STACK_WITHOUT_MALLOC_F)
+ /* Set malloc base */
+ li t0, (CONFIG_SYS_INIT_SP_ADDR + 15) & (~15)
+ PTR_S t0, GD_MALLOC_BASE(k0) # gd->malloc_base offset
+#endif
+
+ /* Write back data in locked cache to DRAM */
+ PTR_LI a0, CACHE_STACK_BASE /* D-Cache unlock base */
+ li a1, CACHE_STACK_SIZE /* D-Cache unlock size */
+
+1:
+ cache HIT_WRITEBACK_INV_D, 0(a0)
+ addiu a0, CONFIG_SYS_DCACHE_LINE_SIZE
+ sub a1, CONFIG_SYS_DCACHE_LINE_SIZE
+ bnez a1, 1b
+ nop
+
+ /* Set KSEG0 Uncached */
+ mfc0 t0, CP0_CONFIG
+ and t0, t0, MIPS_CONF_IMPL
+ or t0, t0, CONF_CM_UNCACHED
+ mtc0 t0, CP0_CONFIG
+ ehb
+
+ jr ra
+ nop
+ END(lowlevel_init)
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 MediaTek Inc.
+ *
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#ifndef _MT7628_H_
+#define _MT7628_H_
+
+#define SYSCTL_BASE 0x10000000
+#define SYSCTL_SIZE 0x100
+#define MEMCTL_BASE 0x10000300
+#define MEMCTL_SIZE 0x100
+#define RBUSCTL_BASE 0x10000400
+#define RBUSCTL_SIZE 0x100
+#define RGCTL_BASE 0x10001000
+#define RGCTL_SIZE 0x800
+
+#define SYSCTL_EFUSE_CFG_REG 0x08
+#define EFUSE_MT7688 0x100000
+
+#define SYSCTL_CHIP_REV_ID_REG 0x0c
+#define PKG_ID 0x10000
+#define PKG_ID_AN 1
+#define PKG_ID_KN 0
+#define VER_S 8
+#define VER_M 0xf00
+#define ECO_S 0
+#define ECO_M 0x0f
+
+#define SYSCTL_SYSCFG0_REG 0x10
+#define XTAL_FREQ_SEL 0x40
+#define XTAL_40MHZ 1
+#define XTAL_25MHZ 0
+#define CHIP_MODE_S 1
+#define CHIP_MODE_M 0x0e
+#define DRAM_TYPE 0x01
+#define DRAM_DDR1 1
+#define DRAM_DDR2 0
+
+#define SYSCTL_ROM_STATUS_REG 0x28
+
+#define SYSCTL_CLKCFG0_REG 0x2c
+#define DIS_BBP_SLEEP 0x08
+#define EN_BBP_CLK 0x04
+#define CPU_PLL_FROM_BBP 0x02
+#define CPU_PLL_FROM_XTAL 0x01
+
+#define SYSCTL_RSTCTL_REG 0x34
+#define MC_RST 0x400
+
+#define SYSCTL_AGPIO_CFG_REG 0x3c
+#define EPHY_GPIO_AIO_EN_S 17
+#define EPHY_GPIO_AIO_EN_M 0x1e0000
+
+#define SYSCTL_GPIO_MODE1_REG 0x60
+#define UART2_MODE_S 26
+#define UART2_MODE_M 0xc000000
+#define UART1_MODE_S 24
+#define UART1_MODE_M 0x3000000
+#define UART0_MODE_S 8
+#define UART0_MODE_M 0x300
+#define SPIS_MODE_S 2
+#define SPIS_MODE_M 0x0c
+
+#define RBUSCTL_DYN_CFG0_REG 0x40
+#define CPU_FDIV_S 8
+#define CPU_FDIV_M 0xf00
+#define CPU_FFRAC_S 0
+#define CPU_FFRAC_M 0x0f
+
+#define RGCTL_PMU_G0_REG 0x100
+#define PMU_CFG_EN 0x80000000
+
+#define RGCTL_PMU_G1_REG 0x104
+#define RG_BUCK_FPWM 0x02
+
+#define RGCTL_PMU_G3_REG 0x10c
+#define NI_DDRLDO_STB 0x40000
+#define NI_DDRLDO_EN 0x10000
+#define RG_DDRLDO_VOSEL 0x40
+
+#define RGCTL_DDR_PAD_CK_G0_REG 0x700
+#define RGCTL_DDR_PAD_CMD_G0_REG 0x708
+#define RGCTL_DDR_PAD_DQ_G0_REG 0x710
+#define RGCTL_DDR_PAD_DQS_G0_REG 0x718
+#define RTT_S 8
+#define RTT_M 0x700
+
+#define RGCTL_DDR_PAD_CK_G1_REG 0x704
+#define RGCTL_DDR_PAD_CMD_G1_REG 0x70c
+#define RGCTL_DDR_PAD_DQ_G1_REG 0x714
+#define RGCTL_DDR_PAD_DQS_G1_REG 0x71c
+#define DRVP_S 0
+#define DRVP_M 0x0f
+#define DRVN_S 8
+#define DRVN_M 0xf00
+
+#ifndef __ASSEMBLY__
+void mt7628_ddr_init(void);
+#endif
+
+#endif /* _MT7628_H_ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2018 Stefan Roese <sr@denx.de>
- */
-
-#ifndef __MT76XX_H
-#define __MT76XX_H
-
-#define MT76XX_SYSCTL_BASE 0x10000000
-
-#define MT76XX_CHIPID_OFFS 0x00
-#define MT76XX_CHIP_REV_ID_OFFS 0x0c
-#define MT76XX_SYSCFG0_OFFS 0x10
-
-#define MT76XX_MEMCTRL_BASE (MT76XX_SYSCTL_BASE + 0x0300)
-#define MT76XX_RGCTRL_BASE (MT76XX_SYSCTL_BASE + 0x1000)
-
-#define MT76XX_ROM_STATUS_REG (MT76XX_SYSCTL_BASE + 0x0028)
-#define MT76XX_CLKCFG0_REG (MT76XX_SYSCTL_BASE + 0x002c)
-#define MT76XX_DYN_CFG0_REG (MT76XX_SYSCTL_BASE + 0x0440)
-
-#define DDR_CFG1_REG (MT76XX_MEMCTRL_BASE + 0x44)
-#define DDR_CFG2_REG (MT76XX_MEMCTRL_BASE + 0x48)
-#define DDR_CFG3_REG (MT76XX_MEMCTRL_BASE + 0x4c)
-#define DDR_CFG4_REG (MT76XX_MEMCTRL_BASE + 0x50)
-
-#ifndef __ASSEMBLY__
-/* Prototypes */
-void ddr_calibrate(void);
-#endif
-
-#endif
CONFIG_ENV_OFFSET_REDUND=0xB0000
CONFIG_ARCH_MTMIPS=y
CONFIG_BOOT_ROM=y
-CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
-CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ARCH_MTMIPS=y
CONFIG_BOARD_LINKIT_SMART_7688=y
CONFIG_BOOT_ROM=y
-CONFIG_ONBOARD_DDR2_SIZE_1024MBIT=y
-CONFIG_ONBOARD_DDR2_CHIP_WIDTH_16BIT=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
projects / oweals / u-boot.git / commitdiff