#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/crm_regs.h>
+#define VDDPU_MASK (0x1f << 9)
+
enum ldo_reg {
LDO_ARM,
LDO_SOC,
writew(enable, &wdog2->wmcr);
}
+static void imx_set_vddpu_power_down(void)
+{
+ struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
+ struct gpc_regs *gpc = (struct gpc_regs *)GPC_BASE_ADDR;
+
+ u32 reg;
+
+ /*
+ * Disable the brown out detection since we are going to be
+ * disabling the LDO.
+ */
+ reg = readl(&anatop->ana_misc2);
+ reg &= ~ANADIG_ANA_MISC2_REG1_BO_EN;
+ writel(reg, &anatop->ana_misc2);
+
+ /* need to power down xPU in GPC before turning off PU LDO */
+ reg = readl(&gpc->gpu_ctrl);
+ writel(reg | 0x1, &gpc->gpu_ctrl);
+
+ reg = readl(&gpc->ctrl);
+ writel(reg | 0x1, &gpc->ctrl);
+ while (readl(&gpc->ctrl) & 0x1)
+ ;
+
+ /* Mask the ANATOP brown out interrupt in the GPC. */
+ reg = readl(&gpc->imr4);
+ reg |= 0x80000000;
+ writel(reg, &gpc->imr4);
+
+ /* disable VDDPU */
+ writel(VDDPU_MASK, &anatop->reg_core_clr);
+
+ /* Clear the BO interrupt in the ANATOP. */
+ reg = readl(&anatop->ana_misc1);
+ reg |= 0x80000000;
+ writel(reg, &anatop->ana_misc1);
+}
+
int arch_cpu_init(void)
{
init_aips();
imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */
+ imx_set_vddpu_power_down();
#ifdef CONFIG_APBH_DMA
/* Start APBH DMA */
u16 wmcr; /* Miscellaneous Control */
};
+struct gpc_regs {
+ u32 ctrl; /* 0x000 */
+ u32 pgr; /* 0x004 */
+ u32 imr1; /* 0x008 */
+ u32 imr2; /* 0x00c */
+ u32 imr3; /* 0x010 */
+ u32 imr4; /* 0x014 */
+ u32 isr1; /* 0x018 */
+ u32 isr2; /* 0x01c */
+ u32 isr3; /* 0x020 */
+ u32 isr4; /* 0x024 */
+ u32 reserved1[0x86];
+ u32 gpu_ctrl; /* 0x260 */
+ u32 gpu_pupscr; /* 0x264 */
+ u32 gpu_pdnscr; /* 0x268 */
+ u32 gpu_sr; /* 0x26c */
+ u32 reserved2[0xc];
+ u32 cpu_ctrl; /* 0x2a0 */
+ u32 cpu_pupscr; /* 0x2a4 */
+ u32 cpu_pdnscr; /* 0x2a8 */
+ u32 cpu_sr; /* 0x2ac */
+};
+
#endif /* __ASSEMBLER__*/
#endif /* __ASM_ARCH_MX6_IMX_REGS_H__ */