Please note that the environment is read-only until the monitor
has been relocated to RAM and a RAM copy of the environment has been
-created; also, when using EEPROM you will have to use getenv_f()
+created; also, when using EEPROM you will have to use env_get_f()
until then to read environment variables.
The environment is protected by a CRC32 checksum. Before the monitor
if ((value = (char **)va_arg(ap, uintptr_t)) == NULL)
return API_EINVAL;
- *value = getenv(name);
+ *value = env_get(name);
return 0;
}
r2 = (unsigned int)images->ft_addr;
} else {
r0 = 1;
- r2 = (unsigned int)getenv("bootargs");
+ r2 = (unsigned int)env_get("bootargs");
}
smp_set_core_boot_addr((unsigned long)kernel_entry, -1);
static unsigned long get_internval_val_mhz(void)
{
- char *interval = getenv(PLATFORM_CYCLE_ENV_VAR);
+ char *interval = env_get(PLATFORM_CYCLE_ENV_VAR);
/*
* interval is the number of platform cycles(MHz) between
* wake up events generated by EPU.
/* Subcommand: PREP */
static void boot_prep_linux(bootm_headers_t *images)
{
- char *commandline = getenv("bootargs");
+ char *commandline = env_get("bootargs");
if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) {
#ifdef CONFIG_OF_LIBFDT
#ifdef CONFIG_ARMV7_NONSEC
bool armv7_boot_nonsec(void)
{
- char *s = getenv("bootm_boot_mode");
+ char *s = env_get("bootm_boot_mode");
bool nonsec = armv7_boot_nonsec_default();
if (s && !strcmp(s, "sec"))
ulong addr = (ulong)kernel_entry | 1;
kernel_entry = (void *)addr;
#endif
- s = getenv("machid");
+ s = env_get("machid");
if (s) {
if (strict_strtoul(s, 16, &machid) < 0) {
debug("strict_strtoul failed!\n");
{
int i;
int ret;
- char const *panel = getenv("panel");
+ char const *panel = env_get("panel");
if (!panel) {
for (i = 0; i < display_count; i++) {
int ecc_test = 0;
u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
- env = getenv("ecc_test");
+ env = env_get("ecc_test");
if (env)
ecc_test = simple_strtol(env, NULL, 0);
char *env;
long ks2_debug = 0;
- env = getenv("ks2_debug");
+ env = env_get("ks2_debug");
if (env)
ks2_debug = simple_strtol(env, NULL, 0);
static void kw_sysrst_action(void)
{
int ret;
- char *s = getenv("sysrstcmd");
+ char *s = env_get("sysrstcmd");
if (!s) {
debug("Error.. %s failed, check sysrstcmd\n",
/*
* no action if sysrstdelay environment variable is not defined
*/
- s = getenv("sysrstdelay");
+ s = env_get("sysrstdelay");
if (s == NULL)
return;
{
const char *board_rev;
- board_rev = getenv("board_rev");
+ board_rev = env_get("board_rev");
if (board_rev == NULL)
printf("Warning: fastboot.board_rev: unknown board revision\n");
omap_die_id((unsigned int *)&die_id);
- if (!getenv("serial#")) {
+ if (!env_get("serial#")) {
snprintf(serial_string, sizeof(serial_string),
"%08x%08x", die_id[0], die_id[3]);
char *serial_string;
unsigned long long serial;
- serial_string = getenv("serial#");
+ serial_string = env_get("serial#");
if (serial_string) {
serial = simple_strtoull(serial_string, NULL, 16);
omap_die_id((unsigned int *)&die_id);
- if (!getenv("usbethaddr")) {
+ if (!env_get("usbethaddr")) {
/*
* Create a fake MAC address from the processor ID code.
* First byte is 0x02 to signify locally administered.
const u32 *prop;
/* Already a valid address in the environment? If so, keep it */
- if (getenv("ethaddr"))
+ if (env_get("ethaddr"))
return 0;
node = fdt_path_offset(nvtboot_blob, "/chosen");
char dtb_name[256];
int buf_len = sizeof(dtb_name);
- if (getenv("fdt_file"))
+ if (env_get("fdt_file"))
return 0; /* do nothing if it is already set */
compat = fdt_stringlist_get(gd->fdt_blob, 0, "compatible", 0, NULL);
{
char *s;
- if ((s = getenv("clocks_in_mhz")) != NULL) {
+ s = env_get("clocks_in_mhz");
+ if (s) {
/* convert all clock information to MHz */
kbd->bi_intfreq /= 1000000L;
kbd->bi_busfreq /= 1000000L;
{
/* First parameter is mapped to $r5 for kernel boot args */
void (*thekernel) (char *, ulong, ulong);
- char *commandline = getenv("bootargs");
+ char *commandline = env_get("bootargs");
ulong rd_data_start, rd_data_end;
/*
linux_cmdline_init();
- bootargs = getenv("bootargs");
+ bootargs = env_get("bootargs");
if (!bootargs)
return;
sprintf(env_buf, "0x%X", (uint) (gd->bd->bi_flashsize));
linux_env_set("flash_size", env_buf);
- cp = getenv("ethaddr");
+ cp = env_get("ethaddr");
if (cp)
linux_env_set("ethaddr", cp);
- cp = getenv("eth1addr");
+ cp = env_get("eth1addr");
if (cp)
linux_env_set("eth1addr", cp);
void (*theKernel)(int zero, int arch, uint params);
#ifdef CONFIG_CMDLINE_TAG
- char *commandline = getenv("bootargs");
+ char *commandline = env_get("bootargs");
#endif
/*
theKernel = (void (*)(int, int, uint))images->ep;
- s = getenv("machid");
+ s = env_get("machid");
if (s) {
machid = simple_strtoul(s, NULL, 16);
printf("Using machid 0x%x from environment\n", machid);
int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
{
void (*kernel)(int, int, int, char *) = (void *)images->ep;
- char *commandline = getenv("bootargs");
+ char *commandline = env_get("bootargs");
ulong initrd_start = images->rd_start;
ulong initrd_end = images->rd_end;
char *of_flat_tree = NULL;
* is not setup properly yet. Search for tdm entry in
* hwconfig.
*/
- ret = getenv_f("hwconfig", buffer, sizeof(buffer));
+ ret = env_get_f("hwconfig", buffer, sizeof(buffer));
if (ret > 0) {
tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
/* If tdm is defined in hwconfig, set law for tdm workaround */
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
/* Extract hwconfig from environment */
- ret = getenv_f("hwconfig", buffer, sizeof(buffer));
+ ret = env_get_f("hwconfig", buffer, sizeof(buffer));
if (ret > 0) {
/*
* If "en_cpc" is not defined in hwconfig then by default all
char *buf = NULL;
int n, res;
- n = getenv_f("hwconfig", buffer, sizeof(buffer));
+ n = env_get_f("hwconfig", buffer, sizeof(buffer));
if (n > 0)
buf = buffer;
#endif
#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
- spin = getenv("spin_table_compat");
+ spin = env_get("spin_table_compat");
if (spin && (*spin == 'n'))
spin_table_compat = 0;
else
#ifdef CONFIG_SYS_SRIO
srio_init();
#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
- char *s = getenv("bootmaster");
+ char *s = env_get("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
srio_boot_master(1);
* Extract hwconfig from environment.
* Search for tdm entry in hwconfig.
*/
- ret = getenv_f("hwconfig", buffer, sizeof(buffer));
+ ret = env_get_f("hwconfig", buffer, sizeof(buffer));
if (ret > 0)
tdm_hwconfig_enabled = hwconfig_f("tdm", buffer);
* Extract hwconfig from environment since we have not properly setup
* the environment but need it for ddr config params
*/
- if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+ if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
buf = buffer;
#endif
if (serdes_prtcl_map & (1 << NONE))
{
char *s;
- if ((s = getenv ("clocks_in_mhz")) != NULL) {
+ s = env_get("clocks_in_mhz");
+ if (s) {
/* convert all clock information to MHz */
kbd->bi_intfreq /= 1000000L;
kbd->bi_busfreq /= 1000000L;
char *cmdline = (char *)param + COMMAND_LINE;
/* PAGE_SIZE */
unsigned long size = images->ep - (unsigned long)param;
- char *bootargs = getenv("bootargs");
+ char *bootargs = env_get("bootargs");
/*
* allow the PREP bootm subcommand, it is required for bootm to work
/* Linux kernel command line */
cmdline = (char *)param + COMMAND_LINE;
- bootargs = getenv("bootargs");
+ bootargs = env_get("bootargs");
/* Clear zero page */
/* cppcheck-suppress nullPointer */
command_line[0] = '\0';
- env_command_line = getenv("bootargs");
+ env_command_line = env_get("bootargs");
/* set console= argument if we use a serial console */
if (!strstr(env_command_line, "console=")) {
- if (!strcmp(getenv("stdout"), "serial")) {
+ if (!strcmp(env_get("stdout"), "serial")) {
/* We seem to use serial console */
sprintf(command_line, "console=ttyS0,%s ",
- getenv("baudrate"));
+ env_get("baudrate"));
}
}
/* argv[1] holds the address of the bzImage */
s = argv[1];
} else {
- s = getenv("fileaddr");
+ s = env_get("fileaddr");
}
if (s)
{
struct bp_tag *params, *params_start;
ulong initrd_start, initrd_end;
- char *commandline = getenv("bootargs");
+ char *commandline = env_get("bootargs");
if (!(flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)))
return 0;
if (smac[2][0] == 0xFF) {
printf("\t<not found>\n");
} else {
- char *ret = getenv("ethaddr");
+ char *ret = env_get("ethaddr");
if (strcmp(ret, __stringify(CONFIG_ETHADDR)) == 0) {
env_set("ethaddr", smac[2]);
if (smac[1][0] == 0xFF) {
printf("\t<not found>\n");
} else {
- char *ret = getenv("eth1addr");
+ char *ret = env_get("eth1addr");
if (strcmp(ret, __stringify(CONFIG_ETH1ADDR)) == 0) {
env_set("eth1addr", smac[1]);
if (smac[0][0] == 0xFF) {
printf("\t<not found>\n");
} else {
- char *ret = getenv("eth2addr");
+ char *ret = env_get("eth2addr");
if (strcmp(ret, __stringify(CONFIG_ETH2ADDR)) == 0) {
env_set("eth2addr", smac[0]);
for (i = 0; i < GPIO_MAX_NUM; i++) {
sprintf(envname, "GPIO%d", i);
- val = getenv(envname);
+ val = env_get(envname);
if (val) {
char direction = toupper(val[0]);
char level = toupper(val[1]);
}
}
- val = getenv("PCIE_OFF");
+ val = env_get("PCIE_OFF");
if (val) {
gpio_direction_input(GPIO_PCIE1_EN);
gpio_direction_input(GPIO_PCIE2_EN);
gpio_direction_output(GPIO_PCIE2_EN, 1);
}
- val = getenv("SDHC_CDWP_OFF");
+ val = env_get("SDHC_CDWP_OFF");
if (!val) {
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
else
printf("NCT72(0x%x): ready\n", id2);
- kval = getenv("kernelargs");
+ kval = env_get("kernelargs");
mmc = find_mmc_device(0);
if (mmc)
get_arc_info();
if (kval) {
- sval = getenv("SERIAL");
+ sval = env_get("SERIAL");
if (sval) {
strcpy(newkernelargs, "SN=");
strcat(newkernelargs, sval);
u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK;
u32 rev = 0;
- s = getenv("maxcpuclk");
+ s = env_get("maxcpuclk");
if (s)
maxcpuclk = simple_strtoul(s, NULL, 10);
(size_t *)&dtbsize,
NULL, 0x20000, (u_char *)dtbaddr);
#else
- char *dtbname = getenv("dtb");
- char *dtbdev = getenv("dtbdev");
- char *dtbpart = getenv("dtbpart");
+ char *dtbname = env_get("dtb");
+ char *dtbdev = env_get("dtbdev");
+ char *dtbpart = env_get("dtbpart");
if (!dtbdev || !dtbpart || !dtbname) {
printf("%s: <dtbdev>/<dtbpart>/<dtb> missing.\n", __func__);
return -1;
char *name, char *altname,
char *suffix)
{
- char *envval = getenv(name);
+ char *envval = env_get(name);
if (0 != envval) {
lcd_printf("%s %s %s", prefix, envval, suffix);
} else if (0 != altname) {
- envval = getenv(altname);
+ envval = env_get(altname);
if (0 != envval)
lcd_printf("%s %s %s", prefix, envval, suffix);
} else {
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_FDT)
printf("<ethaddr> not set. trying DTB ... ");
mac = dtbmacaddr(0);
int enable;
enable = 1;
- s = getenv("watchdog");
+ s = env_get("watchdog");
if (s != NULL)
if ((strncmp(s, "off", 3) == 0) || (strncmp(s, "0", 1) == 0))
enable = 0;
unsigned long splash;
#endif
printf("Init Video as ");
- s = getenv("displaywidth");
+ s = env_get("displaywidth");
if (s != NULL)
display_width = simple_strtoul(s, NULL, 10);
else
display_width = 256;
- s = getenv("displayheight");
+ s = env_get("displayheight");
if (s != NULL)
display_height = simple_strtoul(s, NULL, 10);
else
vcxk_init(display_width, display_height);
#ifdef CONFIG_SPLASH_SCREEN
- s = getenv("splashimage");
+ s = env_get("splashimage");
if (s != NULL) {
splash = simple_strtoul(s, NULL, 16);
vcxk_acknowledge_wait();
{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
};
- if (getenv("fdt_noauto")) {
+ if (env_get("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
return 0;
}
{
init_fan();
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
uchar mac[6];
if (lacie_read_mac_address(mac) == 0)
eth_env_set_enetaddr("ethaddr", mac);
int misc_init_r(void)
{
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
uchar mac[6];
if (lacie_read_mac_address(mac) == 0)
eth_env_set_enetaddr("ethaddr", mac);
}
if (reboot_mode[0] > 0 && isascii(reboot_mode[0])) {
- if (!getenv("reboot-mode"))
+ if (!env_get("reboot-mode"))
env_set("reboot-mode", (char *)reboot_mode);
}
eth_env_set_enetaddr("ethaddr", mac_addr);
}
- if (!getenv("serial#")) {
+ if (!env_get("serial#")) {
len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial,
EFUSE_SN_SIZE);
if (len == EFUSE_SN_SIZE)
{
char *my_bootdelay;
char bootmode = 0;
- char const *panel = getenv("panel");
+ char const *panel = env_get("panel");
/*
* Check the boot-source. If booting from NOR Flash,
bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 1)) ? 1 : 0) << 2;
if (bootmode == 7) {
- my_bootdelay = getenv("nor_bootdelay");
+ my_bootdelay = env_get("nor_bootdelay");
if (my_bootdelay != NULL)
env_set("bootdelay", my_bootdelay);
else
const char *ETHADDR_NAME = "ethaddr";
struct udevice *bus, *dev;
- if (getenv(ETHADDR_NAME))
+ if (env_get(ETHADDR_NAME))
return 0;
if (uclass_get_device_by_seq(UCLASS_I2C, 1, &bus)) {
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
#ifdef CONFIG_REVISION_TAG
u32 get_board_rev(void)
{
- if (getenv("revision#") != NULL)
- return simple_strtoul(getenv("revision#"), NULL, 10);
+ if (env_get("revision#") != NULL)
+ return simple_strtoul(env_get("revision#"), NULL, 10);
return 0;
}
#endif
at91_set_A_periph(AT91_PIN_PE6, 1); /* power up */
/* Select the second timing index for board rev 2 */
- rev_str = getenv("board_rev");
+ rev_str = env_get("board_rev");
if (rev_str && !strncmp(rev_str, "2", 1)) {
struct udevice *dev;
* Set MAC address so we do not need to init Ethernet before Linux
* boot
*/
- env_str = getenv("ethaddr");
+ env_str = env_get("ethaddr");
if (env_str) {
struct at91_emac *emac = (struct at91_emac *)ATMEL_BASE_EMAC;
/* Parse MAC address */
&emac->sa2l);
writel((env_enetaddr[4] | env_enetaddr[5] << 8), &emac->sa2h);
- printf("MAC: %s\n", getenv("ethaddr"));
+ printf("MAC: %s\n", env_get("ethaddr"));
} else {
/* Not set in environment */
printf("MAC: not set\n");
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
int board_cfb_skip(void)
{
- return NULL != getenv("novideo");
+ return NULL != env_get("novideo");
}
static void setup_display(void)
char keypress[ARRAY_SIZE(buttons)+1];
numpressed = read_keys(keypress);
if (numpressed) {
- char *kbd_magic_keys = getenv("magic_keys");
+ char *kbd_magic_keys = env_get("magic_keys");
char *suffix;
/*
* loop over all magic keys
char *keys;
char magic[sizeof(kbd_magic_prefix) + 1];
sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
- keys = getenv(magic);
+ keys = env_get(magic);
if (keys) {
if (!strcmp(keys, keypress))
break;
char cmd_name[sizeof(kbd_command_prefix) + 1];
char *cmd;
sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
- cmd = getenv(cmd_name);
+ cmd = env_get(cmd_name);
if (cmd) {
env_set("preboot", cmd);
return;
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
debug("%s\n", __func__);
- if (!getenv("serial#"))
+ if (!env_get("serial#"))
g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
return 0;
}
int g_dnl_bind_fixup(struct usb_device_descriptor *dev, const char *name)
{
debug("%s\n", __func__);
- if (!getenv("serial#"))
+ if (!env_get("serial#"))
g_dnl_set_serialnumber(CONFIG_USB_SERIALNO);
return 0;
}
* Default MAC address comes from CONFIG_ETHADDR + DIP switches 1-6.
*/
- char *s = getenv("ethaddr");
+ char *s = env_get("ethaddr");
if (s == 0) {
unsigned int x;
char s[] = __stringify(CONFIG_ETHBASE);
gpio_set_value(CL_SOM_AM57X_GPIO_PHY1_RST, 1);
mdelay(20);
- cpsw_phy_envval = getenv("cpsw_phy");
+ cpsw_phy_envval = env_get("cpsw_phy");
if (cpsw_phy_envval != NULL)
cpsw_act_phy = simple_strtoul(cpsw_phy_envval, NULL, 0);
{
int ret;
struct display_info_t *preset;
- char const *panel = getenv("displaytype");
+ char const *panel = env_get("displaytype");
if (!panel) /* Also accept panel for backward compatibility */
- panel = getenv("panel");
+ panel = env_get("panel");
if (!panel)
return -ENOENT;
{
struct prcm *prcm = (struct prcm *)PRCM_BASE;
char *custom_lcd;
- char *displaytype = getenv("displaytype");
+ char *displaytype = env_get("displaytype");
if (displaytype == NULL)
return;
lcd_def = env_parse_displaytype(displaytype);
/* If we did not recognize the preset, check if it's an env variable */
if (lcd_def == NONE) {
- custom_lcd = getenv(displaytype);
+ custom_lcd = env_get(displaytype);
if (custom_lcd == NULL || parse_customlcd(custom_lcd) < 0)
return;
}
return 0;
/* set level of MIPI if specified */
- lv_mipi = getenv("lv_mipi");
+ lv_mipi = env_get("lv_mipi");
if (lv_mipi)
return 0;
{
int i;
int ret;
- char const *panel = getenv("panel");
+ char const *panel = env_get("panel");
if (!panel) {
for (i = 0; i < ARRAY_SIZE(displays); i++) {
struct display_info_t const *dev = displays + i;
u32 maxcpuclk = CONFIG_DA850_EVM_MAX_CPU_CLK;
u32 rev = 0;
- s = getenv("maxcpuclk");
+ s = env_get("maxcpuclk");
if (s)
maxcpuclk = simple_strtoul(s, NULL, 10);
if ((REG(CHIP_REV_ID_REG) & 0x3f) == 0x10)
return;
- if (!strcmp(getenv("dspwake"), "no"))
+ if (!strcmp(env_get("dspwake"), "no"))
return;
*resetvect++ = 0x1E000; /* DSP Idle */
uint8_t tmp[20], addr[10];
- if (getenv("ethaddr") == NULL) {
+ if (env_get("ethaddr") == NULL) {
/* Read Ethernet MAC address from EEPROM */
if (dvevm_read_mac_address(addr)) {
/* Set Ethernet MAC address from EEPROM */
puts("Board: EtherCAN/2 Gateway");
break;
}
- if (getenv_f("serial#", str, sizeof(str)) > 0) {
+ if (env_get_f("serial#", str, sizeof(str)) > 0) {
puts(", serial# ");
puts(str);
}
{
char *str;
- char *serial = getenv("serial#");
+ char *serial = env_get("serial#");
if (serial) {
str = strchr(serial, '_');
if (str && (strlen(str) >= 4)) {
* In some cases this this needs to be set to 4.
* Check the user has set environment mdiv to 4 to change the divisor.
*/
- if ((str = getenv("mdiv")) && (strcmp(str, "4") == 0)) {
+ str = env_get("mdiv");
+ if (str && (strcmp(str, "4") == 0)) {
writel((readl(&pmc->mckr) & ~AT91_PMC_MDIV) |
AT91SAM9_PMC_MDIV_4, &pmc->mckr);
at91_clock_init(CONFIG_SYS_AT91_MAIN_CLOCK);
vid, vdd_target/10);
/* check override variable for overriding VDD */
- vdd_string = getenv("b4qds_vdd_mv");
+ vdd_string = env_get("b4qds_vdd_mv");
if (vdd_override == 0 && vdd_string &&
!strict_strtoul(vdd_string, 10, &vdd_string_override))
vdd_override = vdd_string_override;
* Extract hwconfig from environment since environment
* is not setup properly yet
*/
- getenv_f("hwconfig", buffer, sizeof(buffer));
+ env_get_f("hwconfig", buffer, sizeof(buffer));
buf = buffer;
if (hwconfig_subarg_cmp_f("fsl_b4860_serdes2",
/* Only initialize environment variables that are blank
* (i.e. have not yet been set)
*/
- if (!getenv(enetvar))
+ if (!env_get(enetvar))
env_set(enetvar, ethaddr);
}
}
vdd_target = vdd[vid];
/* check override variable for overriding VDD */
- vdd_string = getenv(CONFIG_VID_FLS_ENV);
+ vdd_string = env_get(CONFIG_VID_FLS_ENV);
if (vdd_override == 0 && vdd_string &&
!strict_strtoul(vdd_string, 10, &vdd_string_override))
vdd_override = vdd_string_override;
vdd_target = vdd[vid];
/* check override variable for overriding VDD */
- vdd_string = getenv(CONFIG_VID_FLS_ENV);
+ vdd_string = env_get(CONFIG_VID_FLS_ENV);
if (vdd_override == 0 && vdd_string &&
!strict_strtoul(vdd_string, 10, &vdd_string_override))
vdd_override = vdd_string_override;
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
char *env_hwconfig;
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
switch (serdes1_prtcl) {
case 0x07:
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
int *riser_phy_addr;
- char *env_hwconfig = getenv("hwconfig");
+ char *env_hwconfig = env_get("hwconfig");
if (hwconfig_f("xqsgmii", env_hwconfig))
riser_phy_addr = &xqsgii_riser_phy_addr[0];
unsigned int i;
char *env_hwconfig;
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
initialize_dpmac_to_slot();
val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
if (hwconfig_f("dspi", env_hwconfig) &&
DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
val = in_le32(dcfg_ccsr + DCFG_RCWSR13 / 4);
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
if (hwconfig_f("dspi", env_hwconfig) &&
DCFG_RCWSR13_DSPI == (val & (u32)(0xf << 8)))
static int is_pex_x2(void)
{
- const char *pex_x2 = getenv("pex_x2");
+ const char *pex_x2 = env_get("pex_x2");
if (pex_x2 && !strcmp(pex_x2, "yes"))
return 1;
char buffer[HWCONFIG_BUFFER_SIZE] = {0};
int esdhc_hwconfig_enabled = 0;
- if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+ if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
esdhc_hwconfig_enabled = hwconfig_f("esdhc", buffer);
if (esdhc_hwconfig_enabled == 0)
int board_video_skip(void)
{
int ret;
- char const *e = getenv("panel");
+ char const *e = env_get("panel");
if (e) {
if (strcmp(e, "claa") == 0) {
int board_video_skip(void)
{
int ret;
- char const *e = getenv("panel");
+ char const *e = env_get("panel");
if (e) {
if (strcmp(e, "seiko") == 0) {
#ifdef CONFIG_VSC7385_ENET
/* If a VSC7385 microcode image is present, then upload it. */
- if ((tmp = getenv("vscfw_addr")) != NULL) {
+ tmp = env_get("vscfw_addr");
+ if (tmp) {
vscfw_addr = simple_strtoul(tmp, NULL, 16);
printf("uploading VSC7385 microcode from %x\n", vscfw_addr);
if (vsc7385_upload_firmware((void *) vscfw_addr,
vdd_target = vdd[vid];
/* check override variable for overriding VDD */
- vdd_string = getenv("t4240qds_vdd_mv");
+ vdd_string = env_get("t4240qds_vdd_mv");
if (vdd_override == 0 && vdd_string &&
!strict_strtoul(vdd_string, 10, &vdd_string_override))
vdd_override = vdd_string_override;
char arg[10];
size_t len;
int i;
- int quiet = simple_strtol(getenv("quiet"), NULL, 10);
+ int quiet = simple_strtol(env_get("quiet"), NULL, 10);
if (board >= GW_UNKNOWN)
return;
#endif
/* default to the first detected enet dev */
- if (!getenv("ethprime")) {
+ if (!env_get("ethprime")) {
struct eth_device *dev = eth_get_dev_by_index(0);
if (dev) {
env_set("ethprime", dev->name);
- printf("set ethprime to %s\n", getenv("ethprime"));
+ printf("set ethprime to %s\n", env_get("ethprime"));
}
}
*/
void get_board_serial(struct tag_serialnr *serialnr)
{
- char *serial = getenv("serial#");
+ char *serial = env_get("serial#");
if (serial) {
serialnr->high = 0;
int quiet; /* Quiet or minimal output mode */
quiet = 0;
- p = getenv("quiet");
+ p = env_get("quiet");
if (p)
quiet = simple_strtol(p, NULL, 10);
else
for (i = 0; i < (sizeof(str)-1) && info->model[i]; i++)
str[i] = tolower(info->model[i]);
env_set("model", str);
- if (!getenv("fdt_file")) {
+ if (!env_get("fdt_file")) {
sprintf(fdt, "%s-%s.dtb", cputype, str);
env_set("fdt_file", fdt);
}
/* initialize env from EEPROM */
if (test_bit(EECONFIG_ETH0, info->config) &&
- !getenv("ethaddr")) {
+ !env_get("ethaddr")) {
eth_env_set_enetaddr("ethaddr", info->mac0);
}
if (test_bit(EECONFIG_ETH1, info->config) &&
- !getenv("eth1addr")) {
+ !env_get("eth1addr")) {
eth_env_set_enetaddr("eth1addr", info->mac1);
}
}
/* Set a non-initialized hwconfig based on board configuration */
- if (!strcmp(getenv("hwconfig"), "_UNKNOWN_")) {
+ if (!strcmp(env_get("hwconfig"), "_UNKNOWN_")) {
buf[0] = 0;
if (gpio_cfg[board_type].rs232_en)
strcat(buf, "rs232;");
int j;
sprintf(mac, "eth1addr");
- tmp = getenv(mac);
+ tmp = env_get(mac);
if (tmp) {
for (j = 0; j < 6; j++) {
mac_addr[j] = tmp ?
{ "sst,w25q256", MTD_DEV_TYPE_NOR, }, /* SPI flash */
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
};
- const char *model = getenv("model");
- const char *display = getenv("display");
+ const char *model = env_get("model");
+ const char *display = env_get("display");
int i;
char rev = 0;
}
}
- if (getenv("fdt_noauto")) {
+ if (env_get("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
return 0;
}
printf(" Adjusting FDT per EEPROM for %s...\n", model);
/* board serial number */
- fdt_setprop(blob, 0, "system-serial", getenv("serial#"),
- strlen(getenv("serial#")) + 1);
+ fdt_setprop(blob, 0, "system-serial", env_get("serial#"),
+ strlen(env_get("serial#")) + 1);
/* board (model contains model from device-tree) */
fdt_setprop(blob, 0, "board", info->model,
strlen((const char *)info->model) + 1);
/* set desired digital video capture format */
- ft_sethdmiinfmt(blob, getenv("hdmiinfmt"));
+ ft_sethdmiinfmt(blob, env_get("hdmiinfmt"));
/*
* Board model specific fixups
}
#if defined(CONFIG_CMD_PCI)
- if (!getenv("nopcifixup"))
+ if (!env_get("nopcifixup"))
ft_board_pci_fixup(blob, bd);
#endif
* remove nodes by alias path if EEPROM config tells us the
* peripheral is not loaded on the board.
*/
- if (getenv("fdt_noconfig")) {
+ if (env_get("fdt_noconfig")) {
puts(" Skiping periperhal config (fdt_noconfig defined)\n");
return 0;
}
#ifdef CONFIG_SPL_ENV_SUPPORT
env_init();
env_load();
- debug("boot_os=%s\n", getenv("boot_os"));
+ debug("boot_os=%s\n", env_get("boot_os"));
if (getenv_yesno("boot_os") == 1)
ret = 0;
#else
char *hexprog;
struct key_program *prog;
- cmd = getenv("loadkeyprogram");
+ cmd = env_get("loadkeyprogram");
if (!cmd || run_command(cmd, 0))
return 1;
- hexprog = getenv("keyprogram");
+ hexprog = env_get("keyprogram");
if (decode_hexstr(hexprog, &binprog))
return 1;
int checkboard(void)
{
- char *s = getenv("serial#");
+ char *s = env_get("serial#");
bool hw_type_cat = pca9698_get_value(0x20, 20);
puts("Board: ");
int checkboard(void)
{
- char *s = getenv("serial#");
+ char *s = env_get("serial#");
bool hw_type_cat = pca9698_get_value(0x20, 18);
puts("Board: ");
goto failure;
/* run "prepboot" from env to get "mmcdev" set */
- cptr = getenv("prepboot");
+ cptr = env_get("prepboot");
if (cptr && !run_command(cptr, 0))
- mmcdev = getenv("mmcdev");
+ mmcdev = env_get("mmcdev");
if (!mmcdev)
goto failure;
- cptr = getenv("ramdiskimage");
+ cptr = env_get("ramdiskimage");
if (cptr)
image_path = cptr;
#ifdef CONFIG_TRAILBLAZER
int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- return run_command(getenv("bootcmd"), flag);
+ return run_command(env_get("bootcmd"), flag);
}
int board_early_init_r(void)
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("eth1addr")) {
+ if (!env_get("eth1addr")) {
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("eth1addr", mac_addr);
}
static int check_mmc_autodetect(void)
{
- char *autodetect_str = getenv("mmcautodetect");
+ char *autodetect_str = env_get("mmcautodetect");
if ((autodetect_str != NULL) &&
(strcmp(autodetect_str, "yes") == 0)) {
boot_choice = readl(HB_SREG_A9_BOOT_SRC_STAT) & 0xff;
sprintf(envbuffer, "bootcmd%d", boot_choice);
- if (getenv(envbuffer)) {
+ if (env_get(envbuffer)) {
sprintf(envbuffer, "run bootcmd%d", boot_choice);
env_set("bootcmd", envbuffer);
} else
int board_late_init(void)
{
- if (!getenv("serial#"))
+ if (!env_get("serial#"))
assign_serial();
- if (!getenv("hardware_id"))
+ if (!env_get("hardware_id"))
assign_hardware_id();
return 0;
env_set("pnvramaddr", (char *)buf);
/* try to read rootfssize (ram image) from environment */
- p = getenv("rootfssize");
+ p = env_get("rootfssize");
if (p != NULL)
strict_strtoul(p, 16, &rootfssize);
pram = (rootfssize + CONFIG_KM_RESERVED_PRAM + CONFIG_KM_PHRAM +
}
/* now try to read values from environment if available */
- p = getenv("boardid");
+ p = env_get("boardid");
if (p != NULL)
rc = strict_strtoul(p, 16, &envbid);
- p = getenv("hwkey");
+ p = env_get("hwkey");
if (p != NULL)
rc = strict_strtoul(p, 16, &envhwkey);
* BoardId/HWkey not available in the environment, so try the
* environment variable for BoardId/HWkey list
*/
- char *bidhwklist = getenv("boardIdListHex");
+ char *bidhwklist = env_get("boardIdListHex");
if (bidhwklist) {
int found = 0;
#if defined(CONFIG_POST)
testpin = post_hotkeys_pressed();
#endif
- s = getenv("test_bank");
+ s = env_get("test_bank");
/* when test_bank is not set, act as if testpin is not asserted */
testboot = (testpin != 0) && (s);
if (verbose) {
GET_STRING("IVM_Symbol", IVM_POS_SYMBOL_ONLY, 8)
GET_STRING("IVM_DeviceName", IVM_POS_SHORT_TEXT, 64)
- tmp = (unsigned char *) getenv("IVM_DeviceName");
+ tmp = (unsigned char *)env_get("IVM_DeviceName");
if (tmp) {
int len = strlen((char *)tmp);
int i = 0;
#if defined(CONFIG_KM_MGCOGE3UN)
char *wait_for_ne;
u8 dip_switch = kw_gpio_get_value(KM_FLASH_ERASE_ENABLE);
- wait_for_ne = getenv("waitforne");
+ wait_for_ne = env_get("waitforne");
if ((wait_for_ne != NULL) && (dip_switch == 0)) {
if (strcmp(wait_for_ne, "true") == 0) {
unsigned char mac_addr[6];
/* get the mac addr from env */
- tmp = getenv("ethaddr");
+ tmp = env_get("ethaddr");
if (!tmp) {
printf("ethaddr env variable not defined\n");
return;
int ret;
/* If 'ethaddr' is already set, do nothing. */
- if (getenv("ethaddr"))
+ if (env_get("ethaddr"))
return 0;
/* EEPROM is at bus 2. */
}
if (reboot_mode[0] > 0 && isascii(reboot_mode[0])) {
- if (!getenv("reboot-mode"))
+ if (!env_get("reboot-mode"))
env_set("reboot-mode", (char *)reboot_mode);
}
return 1;
env_init();
- ret = getenv_f("boot_os", s, sizeof(s));
+ ret = env_get_f("boot_os", s, sizeof(s));
if ((ret != -1) && (strcmp(s, "no") == 0))
return 1;
* recovery_status = <any value> -> start SWUpdate
*
*/
- ret = getenv_f("recovery_status", s, sizeof(s));
+ ret = env_get_f("recovery_status", s, sizeof(s));
if (ret != -1)
return 1;
gd->bd->bi_arch_number = board->machine_id;
/* If the user has not set fdtimage, set the default */
- if (!getenv("fdtimage"))
+ if (!env_get("fdtimage"))
env_set("fdtimage", board->fdtfile);
}
int checkboard(void)
{
char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
+ int i = env_get_f("serial#", buf, sizeof(buf));
u32 config0 = read_c0_prid();
if ((config0 & 0xff0000) == PRID_COMP_LEGACY
params->u.core.rootdev = 0x0;
/* append omap atag only if env setup_omap_atag is set to 1 */
- str = getenv("setup_omap_atag");
+ str = env_get("setup_omap_atag");
if (!str || str[0] != '1')
return;
- str = getenv("setup_console_atag");
+ str = env_get("setup_console_atag");
if (str && str[0] == '1')
setup_console_atag = 1;
else
setup_console_atag = 0;
- setup_boot_reason_atag = getenv("setup_boot_reason_atag");
- setup_boot_mode_atag = getenv("setup_boot_mode_atag");
+ setup_boot_reason_atag = env_get("setup_boot_reason_atag");
+ setup_boot_mode_atag = env_get("setup_boot_mode_atag");
params = *in_params;
t = (struct tag_omap *)¶ms->u;
{
const char *fdtfile;
- if (getenv("fdtfile"))
+ if (env_get("fdtfile"))
return;
fdtfile = model->fdtfile;
*/
static void set_fdt_addr(void)
{
- if (getenv("fdt_addr"))
+ if (env_get("fdt_addr"))
return;
if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC)
if (!model->has_onboard_eth)
return;
- if (getenv("usbethaddr"))
+ if (env_get("usbethaddr"))
return;
BCM2835_MBOX_INIT_HDR(msg);
eth_env_set_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
- if (!getenv("ethaddr"))
- env_set("ethaddr", getenv("usbethaddr"));
+ if (!env_get("ethaddr"))
+ env_set("ethaddr", env_get("usbethaddr"));
return;
}
int ret;
char serial_string[17] = { 0 };
- if (getenv("serial#"))
+ if (env_get("serial#"))
return;
BCM2835_MBOX_INIT_HDR(msg);
if (board_is_odroidxu4())
return info;
- return getenv("dfu_alt_system");
+ return env_get("dfu_alt_system");
}
char *get_dfu_alt_boot(char *interface, char *devstr)
#ifdef CONFIG_SET_DFU_ALT_INFO
char *get_dfu_alt_system(char *interface, char *devstr)
{
- return getenv("dfu_alt_system");
+ return env_get("dfu_alt_system");
}
char *get_dfu_alt_boot(char *interface, char *devstr)
/* just to get secound mac address */
imx_get_mac_from_fuse(1, eth1addr);
- if (!getenv("eth1addr") && is_valid_ethaddr(eth1addr))
+ if (!env_get("eth1addr") && is_valid_ethaddr(eth1addr))
eth_env_set_enetaddr("eth1addr", eth1addr);
imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads));
}
/* If 'unit_serial' is already set, do nothing. */
- if (!getenv("unit_serial")) {
+ if (!env_get("unit_serial")) {
/* This field is Big Endian ! */
serial = (data[0x54] << 24) | (data[0x55] << 16) |
(data[0x56] << 8) | (data[0x57] << 0);
env_set("unit_serial", str);
}
- if (!getenv("unit_ident")) {
+ if (!env_get("unit_ident")) {
memset(str, 0, sizeof(str));
memcpy(str, &data[0x2e], 18);
env_set("unit_ident", str);
}
/* Set ethernet address from EEPROM. */
- if (!getenv("ethaddr") && is_valid_ethaddr(&data[0x62]))
+ if (!env_get("ethaddr") && is_valid_ethaddr(&data[0x62]))
eth_env_set_enetaddr("ethaddr", &data[0x62]);
return 0;
char *ptr_env;
/* If button is not found we take default */
- ptr_env = getenv(envname);
+ ptr_env = env_get(envname);
if (NULL == ptr_env) {
gpio = def;
} else {
strcat(str_tmp, num);
/* If env var is not found we stop */
- ptr_env = getenv(str_tmp);
+ ptr_env = env_get(str_tmp);
if (NULL == ptr_env)
break;
char *kern_size;
char *kern_size_fb;
- partitionset_active = getenv("partitionset_active");
+ partitionset_active = env_get("partitionset_active");
if (partitionset_active) {
if (partitionset_active[0] == 'A')
env_set("partitionset_active", "B");
return -ENOENT;
}
- rootfs = getenv("rootfs");
- rootfs_fallback = getenv("rootfs_fallback");
+ rootfs = env_get("rootfs");
+ rootfs_fallback = env_get("rootfs_fallback");
env_set("rootfs", rootfs_fallback);
env_set("rootfs_fallback", rootfs);
- kern_size = getenv("kernel_size");
- kern_size_fb = getenv("kernel_size_fallback");
+ kern_size = env_get("kernel_size");
+ kern_size_fb = env_get("kernel_size_fallback");
env_set("kernel_size", kern_size_fb);
env_set("kernel_size_fallback", kern_size);
- kern_off = getenv("kernel_Off");
- kern_off_fb = getenv("kernel_Off_fallback");
+ kern_off = env_get("kernel_Off");
+ kern_off_fb = env_get("kernel_Off_fallback");
env_set("kernel_Off", kern_off_fb);
env_set("kernel_Off_fallback", kern_off);
unsigned long boot_retry = 0;
char boot_buf[10];
- upgrade_available = simple_strtoul(getenv("upgrade_available"), NULL,
+ upgrade_available = simple_strtoul(env_get("upgrade_available"), NULL,
10);
if (upgrade_available) {
- boot_retry = simple_strtoul(getenv("boot_retries"), NULL, 10);
+ boot_retry = simple_strtoul(env_get("boot_retries"), NULL, 10);
boot_retry++;
sprintf(boot_buf, "%lx", boot_retry);
env_set("boot_retries", boot_buf);
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
char buf[64];
int f;
- int i = getenv_f("serial#", buf, sizeof(buf));
+ int i = env_get_f("serial#", buf, sizeof(buf));
#ifdef CONFIG_PCI
char *src;
#endif
printf ("hwmon IC init failed\n");
if (flag) {
- param = getenv("brightness");
+ param = env_get("brightness");
rc = param ? simple_strtol(param, NULL, 10) : -1;
if (rc < 0)
rc = DEFAULT_BRIGHTNESS;
char serialno[25];
uint32_t u_id_low, u_id_mid, u_id_high;
- if (!getenv("serial#")) {
+ if (!env_get("serial#")) {
u_id_low = readl(&STM32_U_ID->u_id_low);
u_id_mid = readl(&STM32_U_ID->u_id_mid);
u_id_high = readl(&STM32_U_ID->u_id_high);
char *serial_string;
unsigned long long serial;
- serial_string = getenv("serial#");
+ serial_string = env_get("serial#");
if (serial_string) {
serial = simple_strtoull(serial_string, NULL, 16);
else
sprintf(ethaddr, "eth%daddr", i);
- if (getenv(ethaddr))
+ if (env_get(ethaddr))
continue;
/* Non OUI / registered MAC address */
eth_env_set_enetaddr(ethaddr, mac_addr);
}
- if (!getenv("serial#")) {
+ if (!env_get("serial#")) {
snprintf(serial_string, sizeof(serial_string),
"%08x%08x", sid[0], sid[3]);
udelay(5000);
#endif
- e = getenv("gs_base_board");
+ e = env_get("gs_base_board");
if (e != NULL) {
if (strcmp(e, "G283") == 0) {
int key = gpio_get_value(IMX_GPIO_NR(2, 29));
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("eth1addr")) {
+ if (!env_get("eth1addr")) {
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("eth1addr", mac_addr);
}
omap_die_id_display();
- eth_addr = getenv("ethaddr");
+ eth_addr = env_get("ethaddr");
if (eth_addr)
return 0;
if (ret)
return 0;
- eth_addr = getenv("ethaddr");
+ eth_addr = env_get("ethaddr");
if (!eth_addr)
TAM3517_READ_MAC_FROM_EEPROM(&info);
fb = (void *)0x88000000;
- s = getenv("panel");
+ s = env_get("panel");
if (s) {
index = simple_strtoul(s, NULL, 10);
if (index < ARRAY_SIZE(lcd_cfg))
{
#if CONFIG_IS_ENABLED(CMD_NET)
int ret;
- const char *cpuid = getenv("cpuid#");
+ const char *cpuid = env_get("cpuid#");
u8 hash[SHA256_SUM_LEN];
int size = sizeof(hash);
u8 mac_addr[6];
/* Only generate a MAC address, if none is set in the environment */
- if (getenv("ethaddr"))
+ if (env_get("ethaddr"))
return;
if (!cpuid) {
char *serial_string;
u64 serial = 0;
- serial_string = getenv("serial#");
+ serial_string = env_get("serial#");
if (serial_string)
serial = simple_strtoull(serial_string, NULL, 16);
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("eth1addr")) {
+ if (!env_get("eth1addr")) {
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("eth1addr", mac_addr);
}
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
puts("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("ethaddr", mac_addr);
mac_addr[4] = mac_lo & 0xFF;
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
- if (!getenv("eth1addr")) {
+ if (!env_get("eth1addr")) {
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("eth1addr", mac_addr);
}
mac_addr[4] = (mac_lo & 0xFF00) >> 8;
mac_addr[5] = mac_lo & 0xFF;
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
mac_addr[4] = (mac_lo & 0xFF00) >> 8;
mac_addr[5] = mac_lo & 0xFF;
- if (!getenv("eth1addr")) {
+ if (!env_get("eth1addr")) {
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("eth1addr", mac_addr);
}
mac_addr[4] = (mac_lo & 0xFF00) >> 8;
mac_addr[5] = mac_lo & 0xFF;
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
mac_addr[4] = (mac_lo & 0xFF00) >> 8;
mac_addr[5] = mac_lo & 0xFF;
- if (!getenv("eth1addr")) {
+ if (!env_get("eth1addr")) {
if (is_valid_ethaddr(mac_addr))
eth_env_set_enetaddr("eth1addr", mac_addr);
}
char *env;
int res = -1;
- env = getenv(env_name);
+ env = env_get(env_name);
if (env)
res = simple_strtol(env, NULL, 0);
u32 ddr3a_size;
int unitrd_fixup = 0;
- env = getenv("mem_lpae");
+ env = env_get("mem_lpae");
lpae = env && simple_strtol(env, NULL, 0);
- env = getenv("uinitrd_fixup");
+ env = env_get("uinitrd_fixup");
unitrd_fixup = env && simple_strtol(env, NULL, 0);
ddr3a_size = 0;
}
/* reserve memory at start of bank */
- env = getenv("mem_reserve_head");
+ env = env_get("mem_reserve_head");
if (env) {
start[0] += ustrtoul(env, &endp, 0);
size[0] -= ustrtoul(env, &endp, 0);
}
- env = getenv("mem_reserve");
+ env = env_get("mem_reserve");
if (env)
size[0] -= ustrtoul(env, &endp, 0);
char *env;
u64 *reserve_start;
- env = getenv("mem_lpae");
+ env = env_get("mem_lpae");
lpae = env && simple_strtol(env, NULL, 0);
if (lpae) {
setup_iomux_dce_uart();
/* if using the default device tree, use version for V1.0 HW */
- fdt_env = getenv("fdt_file");
+ fdt_env = env_get("fdt_file");
if ((fdt_env != NULL) && (strcmp(FDT_FILE, fdt_env) == 0)) {
env_set("fdt_file", FDT_FILE_V1_0);
printf("patching fdt_file to " FDT_FILE_V1_0 "\n");
len = cli_readline(message);
it = console_buffer[0];
- soc = getenv("soc");
+ soc = env_get("soc");
if (!strcmp("mx6", soc)) {
#ifdef CONFIG_MACH_TYPE
if (it == 'y' || it == 'Y')
/* Only initialize environment variables that are blank
* (i.e. have not yet been set)
*/
- if (!getenv(enetvar))
+ if (!env_get(enetvar))
env_set(enetvar, ethaddr);
}
}
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
- if (!getenv("ethaddr")) {
+ if (!env_get("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
if (is_valid_ethaddr(mac_addr))
i2c_write(0x2c, 0x01, 1, &enable_backlight, 1);
/* set display contrast */
- display_contrast_str = getenv("fwopt_dispcontrast");
+ display_contrast_str = env_get("fwopt_dispcontrast");
if (display_contrast_str)
display_contrast = simple_strtoul(display_contrast_str,
NULL, 10);
/* Display board specific information */
puts(" ");
- i = getenv_f("board_rev", buf, sizeof(buf));
+ i = env_get_f("board_rev", buf, sizeof(buf));
if (i > 0)
printf("Rev %s, ", buf);
- i = getenv_f("serial#", buf, sizeof(buf));
+ i = env_get_f("serial#", buf, sizeof(buf));
if (i > 0)
printf("Serial# %s, ", buf);
- i = getenv_f("board_cfg", buf, sizeof(buf));
+ i = env_get_f("board_cfg", buf, sizeof(buf));
if (i > 0)
printf("Cfg %s", buf);
puts("\n");
* and default boot_targets
*/
new_targets = calloc(1, strlen(mode) +
- strlen(getenv("boot_targets")) + 2);
+ strlen(env_get("boot_targets")) + 2);
- sprintf(new_targets, "%s %s", mode, getenv("boot_targets"));
+ sprintf(new_targets, "%s %s", mode, env_get("boot_targets"));
env_set("boot_targets", new_targets);
return 0;
sprintf(name, "eth%iaddr", idx);
else
strcpy(name, "ethaddr");
- val = getenv(name);
+ val = env_get(name);
if (!val)
val = "(not set)";
printf("%-12s= %s\n", name, val);
} while (dev);
printf("current eth = %s\n", eth_get_name());
- printf("ip_addr = %s\n", getenv("ipaddr"));
+ printf("ip_addr = %s\n", env_get("ipaddr"));
}
#endif
#if defined(CONFIG_HAS_ETH5)
print_eth(5);
#endif
- printf("IP addr = %s\n", getenv("ipaddr"));
+ printf("IP addr = %s\n", env_get("ipaddr"));
#endif
}
int bootm_maybe_autostart(cmd_tbl_t *cmdtp, const char *cmd)
{
- const char *ep = getenv("autostart");
+ const char *ep = env_get("autostart");
if (ep && !strcmp(ep, "yes")) {
char *local_args[2];
#if defined(CONFIG_CMD_BOOTD)
int do_bootd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- return run_command(getenv("bootcmd"), flag);
+ return run_command(env_get("bootcmd"), flag);
}
U_BOOT_CMD(
return NULL;
sprintf(name, "bootmenu_%d", n);
- return getenv(name);
+ return env_get(name);
}
static void bootmenu_print_entry(void *data)
delay_str = argv[1];
if (!delay_str)
- delay_str = getenv("bootmenu_delay");
+ delay_str = env_get("bootmenu_delay");
if (delay_str)
delay = (int)simple_strtol(delay_str, NULL, 10);
struct mtdids id;
ulong addr;
- addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
+ addr = simple_strtoul(env_get("cramfsaddr"), NULL, 16);
/* hack! */
/* cramfs_* only supports NOR flash chips */
part.offset = (u64)(uintptr_t) map_sysmem(addr - OFFSET_ADJUSTMENT, 0);
/* pre-set Boot file name */
- if ((filename = getenv("bootfile")) == NULL) {
+ filename = env_get("bootfile");
+ if (!filename)
filename = "uImage";
- }
if (argc == 2) {
filename = argv[1];
struct mtdids id;
ulong addr;
- addr = simple_strtoul(getenv("cramfsaddr"), NULL, 16);
+ addr = simple_strtoul(env_get("cramfsaddr"), NULL, 16);
/* hack! */
/* cramfs_* only supports NOR flash chips */
unsigned long addr; /* Address of the ELF image */
unsigned long rc; /* Return value from user code */
char *sload = NULL;
- const char *ep = getenv("autostart");
+ const char *ep = env_get("autostart");
int rcode = 0;
/* Consume 'bootelf' */
* (LOCAL_MEM_LOCAL_ADRS + BOOT_LINE_OFFSET) as defined by
* VxWorks BSP. For example, on PowerPC it defaults to 0x4200.
*/
- tmp = getenv("bootaddr");
+ tmp = env_get("bootaddr");
if (!tmp) {
printf("## VxWorks bootline address not specified\n");
} else {
* parameter. If it is not defined, we may be able to
* construct the info.
*/
- bootline = getenv("bootargs");
+ bootline = env_get("bootargs");
if (bootline) {
memcpy((void *)bootaddr, bootline,
max(strlen(bootline), (size_t)255));
flush_cache(bootaddr, max(strlen(bootline),
(size_t)255));
} else {
- tmp = getenv("bootdev");
+ tmp = env_get("bootdev");
if (tmp) {
strcpy(build_buf, tmp);
ptr = strlen(tmp);
} else
printf("## VxWorks boot device not specified\n");
- tmp = getenv("bootfile");
+ tmp = env_get("bootfile");
if (tmp)
ptr += sprintf(build_buf + ptr,
"host:%s ", tmp);
* The following parameters are only needed if 'bootdev'
* is an ethernet device, otherwise they are optional.
*/
- tmp = getenv("ipaddr");
+ tmp = env_get("ipaddr");
if (tmp) {
ptr += sprintf(build_buf + ptr, "e=%s", tmp);
- tmp = getenv("netmask");
+ tmp = env_get("netmask");
if (tmp) {
u32 mask = getenv_ip("netmask").s_addr;
ptr += sprintf(build_buf + ptr,
}
}
- tmp = getenv("serverip");
+ tmp = env_get("serverip");
if (tmp)
ptr += sprintf(build_buf + ptr, "h=%s ", tmp);
- tmp = getenv("gatewayip");
+ tmp = env_get("gatewayip");
if (tmp)
ptr += sprintf(build_buf + ptr, "g=%s ", tmp);
- tmp = getenv("hostname");
+ tmp = env_get("hostname");
if (tmp)
ptr += sprintf(build_buf + ptr, "tn=%s ", tmp);
- tmp = getenv("othbootargs");
+ tmp = env_get("othbootargs");
if (tmp) {
strcpy(build_buf + ptr, tmp);
ptr += strlen(tmp);
* Since E820 information is critical to the kernel, if we don't
* specify these in the environments, use a default one.
*/
- tmp = getenv("e820data");
+ tmp = env_get("e820data");
if (tmp)
data = (struct e820entry *)simple_strtoul(tmp, NULL, 16);
else
data = (struct e820entry *)VXWORKS_E820_DATA_ADDR;
- tmp = getenv("e820info");
+ tmp = env_get("e820info");
if (tmp)
info = (struct e820info *)simple_strtoul(tmp, NULL, 16);
else
int op, dev = FPGA_INVALID_DEVICE;
size_t data_size = 0;
void *fpga_data = NULL;
- char *devstr = getenv("fpga");
- char *datastr = getenv("fpgadata");
+ char *devstr = env_get("fpga");
+ char *datastr = env_get("fpgadata");
int rc = FPGA_FAIL;
int wrong_parms = 0;
#if defined(CONFIG_FIT)
memset(s + strlen(s) - 1, '\0', 1);
memmove(s, s + 2, strlen(s) - 1);
- e = getenv(s);
+ e = env_get(s);
if (e == NULL) {
#ifdef CONFIG_RANDOM_UUID
debug("%s unset. ", str);
gen_rand_uuid_str(uuid_str, UUID_STR_FORMAT_GUID);
env_set(s, uuid_str);
- e = getenv(s);
+ e = env_get(s);
if (e) {
debug("Set to random.\n");
ret = 0;
section = argv[1];
file_address = (char *)simple_strtoul(
- argc < 3 ? getenv("loadaddr") : argv[2], NULL, 16);
+ argc < 3 ? env_get("loadaddr") : argv[2], NULL, 16);
file_size = (size_t)simple_strtoul(
- argc < 4 ? getenv("filesize") : argv[3], NULL, 16);
+ argc < 4 ? env_get("filesize") : argv[3], NULL, 16);
return ini_parse(file_address, file_size, ini_handler, (void *)section);
}
i++;
}
s[i] = 0;
- return getenv((const char *)&s[2]);
+ return env_get((const char *)&s[2]);
} else {
return s;
}
ulong offset = load_addr;
/* pre-set Boot file name */
- if ((filename = getenv("bootfile")) == NULL) {
+ filename = env_get("bootfile");
+ if (!filename)
filename = "uImage";
- }
if (argc == 2) {
filename = argv[1];
load_baudrate = current_baudrate = gd->baudrate;
#endif
- if (((env_echo = getenv("loads_echo")) != NULL) && (*env_echo == '1')) {
+ env_echo = env_get("loads_echo");
+ if (env_echo && *env_echo == '1')
do_echo = 1;
- } else {
+ else
do_echo = 0;
- }
#ifdef CONFIG_SYS_LOADS_BAUD_CHANGE
if (argc >= 2) {
offset = CONFIG_SYS_LOAD_ADDR;
/* pre-set offset from $loadaddr */
- if ((s = getenv("loadaddr")) != NULL) {
+ s = env_get("loadaddr");
+ if (s)
offset = simple_strtoul(s, NULL, 16);
- }
load_baudrate = current_baudrate = gd->baudrate;
#endif
/* Set up log version */
- if ((s = getenv ("logversion")) != NULL)
+ s = env_get("logversion");
+ if (s)
log_version = (int)simple_strtoul(s, NULL, 10);
if (log_version == 2)
log->v2.start = log->v2.con;
/* Initialize default loglevel if present */
- if ((s = getenv ("loglevel")) != NULL)
+ s = env_get("loglevel");
+ if (s)
console_loglevel = (int)simple_strtoul(s, NULL, 10);
gd->flags |= GD_FLG_LOGINIT;
if (strlen(verify_str) == 32)
vsum_str = verify_str;
else {
- vsum_str = getenv(verify_str);
+ vsum_str = env_get(verify_str);
if (vsum_str == NULL || strlen(vsum_str) != 32)
return 1;
}
static const char *getenv_mtdparts(char *buf)
{
if (gd->flags & GD_FLG_ENV_READY)
- return getenv("mtdparts");
- if (getenv_f("mtdparts", buf, MTDPARTS_MAXLEN) != -1)
+ return env_get("mtdparts");
+ if (env_get_f("mtdparts", buf, MTDPARTS_MAXLEN) != -1)
return buf;
return NULL;
}
}
/* get variables */
- ids = getenv("mtdids");
+ ids = env_get("mtdids");
parts = getenv_mtdparts(tmp_parts);
- current_partition = getenv("partition");
+ current_partition = env_get("partition");
/* save it for later parsing, cannot rely on current partition pointer
* as 'partition' variable may be updated during init */
current_mtd_partnum = pnum;
current_save();
}
- } else if (getenv("partition") == NULL) {
+ } else if (env_get("partition") == NULL) {
debug("no partition variable set, setting...\n");
current_save();
}
const char *addr_str;
unsigned long addr;
- addr_str = getenv("loadaddr");
+ addr_str = env_get("loadaddr");
if (addr_str)
addr = simple_strtoul(addr_str, NULL, 16);
else
#else
int quiet = 0;
#endif
- const char *quiet_str = getenv("quiet");
+ const char *quiet_str = env_get("quiet");
int dev = nand_curr_device;
int repeat = flag & CMD_FLAG_REPEAT;
switch (argc) {
case 1:
addr = CONFIG_SYS_LOAD_ADDR;
- boot_device = getenv("bootdevice");
+ boot_device = env_get("bootdevice");
break;
case 2:
addr = simple_strtoul(argv[1], NULL, 16);
- boot_device = getenv("bootdevice");
+ boot_device = env_get("bootdevice");
break;
case 3:
addr = simple_strtoul(argv[1], NULL, 16);
ulong addr;
/* pre-set load_addr */
- s = getenv("loadaddr");
+ s = env_get("loadaddr");
if (s != NULL)
load_addr = simple_strtoul(s, NULL, 16);
}
}
- toff = getenv("timeoffset");
+ toff = env_get("timeoffset");
if (toff == NULL)
net_ntp_time_offset = 0;
else
ulong value;
char *endp;
- s = getenv(varname);
+ s = env_get(varname);
if (s)
value = simple_strtoul(s, &endp, 16);
if (!s || endp == s)
return 1;
/* Set read buffer to initial value or empty sting */
- init_val = getenv(argv[1]);
+ init_val = env_get(argv[1]);
if (init_val)
snprintf(buffer, CONFIG_SYS_CBSIZE, "%s", init_val);
else
* return address of storage for that variable,
* or NULL if not found
*/
-char *getenv(const char *name)
+char *env_get(const char *name)
{
if (gd->flags & GD_FLG_ENV_READY) { /* after import into hashtable */
ENTRY e, *ep;
}
/* restricted capabilities before import */
- if (getenv_f(name, (char *)(gd->env_buf), sizeof(gd->env_buf)) > 0)
+ if (env_get_f(name, (char *)(gd->env_buf), sizeof(gd->env_buf)) > 0)
return (char *)(gd->env_buf);
return NULL;
/*
* Look up variable from environment for restricted C runtime env.
*/
-int getenv_f(const char *name, char *buf, unsigned len)
+int env_get_f(const char *name, char *buf, unsigned len)
{
int i, nxt;
ulong getenv_ulong(const char *name, int base, ulong default_val)
{
/*
- * We can use getenv() here, even before relocation, since the
+ * We can use env_get() here, even before relocation, since the
* environment variable value is an integer and thus short.
*/
- const char *str = getenv(name);
+ const char *str = env_get(name);
return str ? simple_strtoul(str, NULL, base) : default_val;
}
static bool is_pxe;
/*
- * Like getenv, but prints an error if envvar isn't defined in the
- * environment. It always returns what getenv does, so it can be used in
- * place of getenv without changing error handling otherwise.
+ * Like env_get, but prints an error if envvar isn't defined in the
+ * environment. It always returns what env_get does, so it can be used in
+ * place of env_get without changing error handling otherwise.
*/
static char *from_env(const char *envvar)
{
char *ret;
- ret = getenv(envvar);
+ ret = env_get(envvar);
if (!ret)
printf("missing environment variable: %s\n", envvar);
}
bootm_argv[2] = initrd_str;
- strcpy(bootm_argv[2], getenv("ramdisk_addr_r"));
+ strcpy(bootm_argv[2], env_get("ramdisk_addr_r"));
strcat(bootm_argv[2], ":");
- strcat(bootm_argv[2], getenv("filesize"));
+ strcat(bootm_argv[2], env_get("filesize"));
}
if (get_relfile_envaddr(cmdtp, label->kernel, "kernel_addr_r") < 0) {
if (label->ipappend & 0x1) {
sprintf(ip_str, " ip=%s:%s:%s:%s",
- getenv("ipaddr"), getenv("serverip"),
- getenv("gatewayip"), getenv("netmask"));
+ env_get("ipaddr"), env_get("serverip"),
+ env_get("gatewayip"), env_get("netmask"));
}
#ifdef CONFIG_CMD_NET
printf("append: %s\n", finalbootargs);
}
- bootm_argv[1] = getenv("kernel_addr_r");
+ bootm_argv[1] = env_get("kernel_addr_r");
/*
* fdt usage is optional:
*
* Scenario 3: fdt blob is not available.
*/
- bootm_argv[3] = getenv("fdt_addr_r");
+ bootm_argv[3] = env_get("fdt_addr_r");
/* if fdt label is defined then get fdt from server */
if (bootm_argv[3]) {
} else if (label->fdtdir) {
char *f1, *f2, *f3, *f4, *slash;
- f1 = getenv("fdtfile");
+ f1 = env_get("fdtfile");
if (f1) {
f2 = "";
f3 = "";
* or the boot scripts should set $fdtfile
* before invoking "pxe" or "sysboot".
*/
- f1 = getenv("soc");
+ f1 = env_get("soc");
f2 = "-";
- f3 = getenv("board");
+ f3 = env_get("board");
f4 = ".dtb";
}
}
if (!bootm_argv[3])
- bootm_argv[3] = getenv("fdt_addr");
+ bootm_argv[3] = env_get("fdt_addr");
if (bootm_argv[3]) {
if (!bootm_argv[2])
}
if (argc < 6)
- filename = getenv("bootfile");
+ filename = env_get("bootfile");
else {
filename = argv[5];
env_set("bootfile", filename);
void *load_addr;
void *initrd_addr;
- env = getenv("loadaddr");
+ env = env_get("loadaddr");
load_addr = env ?
(void *)simple_strtoul(env, NULL, 16) :
#ifdef CONFIG_LOADADDR
NULL;
#endif
- env = getenv("ramdiskaddr");
+ env = env_get("ramdiskaddr");
initrd_addr = env ?
(void *)simple_strtoul(env, NULL, 16) :
#ifdef CONFIG_RAMDISK_ADDR
switch (argc) {
case 3:
- addr_str = getenv("loadaddr");
+ addr_str = env_get("loadaddr");
if (addr_str != NULL) {
addr = simple_strtoul (addr_str, NULL, 16);
} else {
addr = CONFIG_SYS_LOAD_ADDR;
}
- filename = getenv ("bootfile");
+ filename = env_get("bootfile");
count = 0;
break;
case 4:
addr = simple_strtoul (argv[3], NULL, 16);
- filename = getenv ("bootfile");
+ filename = env_get("bootfile");
count = 0;
break;
case 5:
}
if (t == NULL) {
- value = getenv(name);
+ value = env_get(name);
if (value == NULL) {
printf("## Error: variable \"%s\" not defined\n", name);
count = 0;
addr = simple_strtoul(argv[3], NULL, 16);
- filename = getenv("bootfile");
+ filename = env_get("bootfile");
switch (argc) {
case 3:
- addr_str = getenv("loadaddr");
+ addr_str = env_get("loadaddr");
if (addr_str != NULL)
addr = simple_strtoul(addr_str, NULL, 16);
else
static int passwd_abort(uint64_t etime)
{
- const char *sha_env_str = getenv("bootstopkeysha256");
+ const char *sha_env_str = env_get("bootstopkeysha256");
u8 sha_env[SHA256_SUM_LEN];
u8 sha[SHA256_SUM_LEN];
char presskey[MAX_DELAY_STOP_STR];
int retry;
}
delaykey[] = {
- { .str = getenv("bootdelaykey"), .retry = 1 },
- { .str = getenv("bootstopkey"), .retry = 0 },
+ { .str = env_get("bootdelaykey"), .retry = 1 },
+ { .str = env_get("bootstopkey"), .retry = 0 },
};
char presskey[MAX_DELAY_STOP_STR];
bootlimit = getenv_ulong("bootlimit", 10, 0);
#endif /* CONFIG_BOOTCOUNT_LIMIT */
- s = getenv("bootdelay");
+ s = env_get("bootdelay");
bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
#ifdef CONFIG_OF_CONTROL
#ifdef CONFIG_POST
if (gd->flags & GD_FLG_POSTFAIL) {
- s = getenv("failbootcmd");
+ s = env_get("failbootcmd");
} else
#endif /* CONFIG_POST */
#ifdef CONFIG_BOOTCOUNT_LIMIT
if (bootlimit && (bootcount > bootlimit)) {
printf("Warning: Bootlimit (%u) exceeded. Using altbootcmd.\n",
(unsigned)bootlimit);
- s = getenv("altbootcmd");
+ s = env_get("altbootcmd");
} else
#endif /* CONFIG_BOOTCOUNT_LIMIT */
- s = getenv("bootcmd");
+ s = env_get("bootcmd");
process_fdt_options(gd->fdt_blob);
stored_bootdelay = bootdelay;
#ifdef CONFIG_MENUKEY
if (menukey == CONFIG_MENUKEY) {
- s = getenv("menucmd");
+ s = env_get("menucmd");
if (s)
run_command_list(s, -1, 0);
}
{
char *buf;
const char *env_val;
- char *cmdline = getenv("bootargs");
+ char *cmdline = env_get("bootargs");
int want_silent;
/*
#ifdef CONFIG_TRACE
/* Pretend to run the OS, then run a user command */
if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) {
- char *cmd_list = getenv("fakegocmd");
+ char *cmd_list = env_get("fakegocmd");
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO,
images, boot_fn);
int (*appl)(int, char *const[]);
/* Don't start if "autostart" is set to "no" */
- s = getenv("autostart");
+ s = env_get("autostart");
if ((s != NULL) && !strcmp(s, "no")) {
env_set_hex("filesize", images->os.image_len);
return 0;
cmdline = malloc(len);
copy_args(cmdline, argc, argv, ' ');
} else {
- cmdline = getenv("bootargs");
+ cmdline = env_get("bootargs");
if (cmdline == NULL)
cmdline = "";
}
#endif
/* See README.plan9 */
- s = getenv("confaddr");
+ s = env_get("confaddr");
if (s != NULL) {
char *confaddr = (char *)simple_strtoul(s, NULL, 16);
if (argc > 0) {
copy_args(confaddr, argc, argv, '\n');
} else {
- s = getenv("bootargs");
+ s = env_get("bootargs");
if (s != NULL)
strcpy(confaddr, s);
}
ret = fdt_add_subnode(*of_flat_tree, 0, "chosen");
if ((ret >= 0 || ret == -FDT_ERR_EXISTS)) {
- bootline = getenv("bootargs");
+ bootline = env_get("bootargs");
if (bootline) {
ret = fdt_find_and_setprop(*of_flat_tree,
"/chosen", "bootargs",
*/
void bootretry_init_cmd_timeout(void)
{
- char *s = getenv("bootretry");
+ char *s = env_get("bootretry");
if (s != NULL)
retry_time = (int)simple_strtol(s, NULL, 10);
for (i = 1; i < argc; ++i) {
char *arg;
- arg = getenv(argv[i]);
+ arg = env_get(argv[i]);
if (arg == NULL) {
printf("## Error: \"%s\" not defined\n", argv[i]);
return 1;
{
char *newdir;
if (child->argv[1] == NULL)
- newdir = getenv("HOME");
+ newdir = env_get("HOME");
else
newdir = child->argv[1];
if (chdir(newdir)) {
#ifndef CONFIG_FEATURE_SH_FANCY_PROMPT
PS1 = NULL;
#else
- PS1 = getenv("PS1");
+ PS1 = env_get("PS1");
if(PS1==0)
PS1 = "\\w \\$ ";
#endif
#ifdef CONFIG_CMDLINE_PS_SUPPORT
if (i->promptmode == 1)
- ps_prompt = getenv("PS1");
+ ps_prompt = env_get("PS1");
else
- ps_prompt = getenv("PS2");
+ ps_prompt = env_get("PS2");
if (ps_prompt)
prompt = ps_prompt;
#endif
name=strdup(s);
#ifdef __U_BOOT__
- if (getenv(name) != NULL) {
+ if (env_get(name) != NULL) {
printf ("ERROR: "
"There is a global environment variable with the same name.\n");
free(name);
}
}
- p = getenv(src);
+ p = env_get(src);
if (!p)
p = get_local_var(src);
static void update_ifs_map(void)
{
/* char *ifs and char map[256] are both globals. */
- ifs = (uchar *)getenv("IFS");
+ ifs = (uchar *)env_get("IFS");
if (ifs == NULL) ifs=(uchar *)" \t\n";
/* Precompute a list of 'flow through' behavior so it can be treated
* quickly up front. Computation is necessary because of IFS.
envname[i] = 0;
/* Get its value */
- envval = getenv(envname);
+ envval = env_get(envname);
/* Copy into the line if it exists */
if (envval != NULL)
* WARNING:
*
* We must create a temporary copy of the command since the command we get
- * may be the result from getenv(), which returns a pointer directly to
+ * may be the result from env_get(), which returns a pointer directly to
* the environment data, which may change magicly when the command we run
* creates or modifies environment variables (like "bootp" does).
*/
static void console_update_silent(void)
{
#ifdef CONFIG_SILENT_CONSOLE
- if (getenv("silent") != NULL)
+ if (env_get("silent") != NULL)
gd->flags |= GD_FLG_SILENT;
else
gd->flags &= ~GD_FLG_SILENT;
/* stdin stdout and stderr are in environment */
/* scan for it */
- stdinname = getenv("stdin");
- stdoutname = getenv("stdout");
- stderrname = getenv("stderr");
+ stdinname = env_get("stdin");
+ stdoutname = env_get("stdout");
+ stderrname = env_get("stderr");
if (OVERWRITE_CONSOLE == 0) { /* if not overwritten by config switch */
inputdev = search_device(DEV_FLAGS_INPUT, stdinname);
* console to serial console in this case or suppress it if
* "silent" mode was requested.
*/
- if (getenv("splashimage") != NULL) {
+ if (env_get("splashimage") != NULL) {
if (!(gd->flags & GD_FLG_SILENT))
outputdev = search_device (DEV_FLAGS_OUTPUT, "serial");
}
/* check for alias */
strcpy(env_alias_name, "fastboot_partition_alias_");
strncat(env_alias_name, name, 32);
- aliased_part_name = getenv(env_alias_name);
+ aliased_part_name = env_get(env_alias_name);
if (aliased_part_name != NULL)
ret = part_get_info_by_name(dev_desc,
aliased_part_name, info);
return err;
}
- serial = getenv("serial#");
+ serial = env_get("serial#");
if (serial) {
err = fdt_setprop(fdt, 0, "serial-number", serial,
strlen(serial) + 1);
if (nodeoffset < 0)
return nodeoffset;
- str = getenv("bootargs");
+ str = env_get("bootargs");
if (str) {
err = fdt_setprop(fdt, nodeoffset, "bootargs", str,
strlen(str) + 1);
} else {
continue;
}
- tmp = getenv(mac);
+ tmp = env_get(mac);
if (!tmp)
continue;
if (strlen(verify_str) == digits)
vsum_str = verify_str;
else {
- vsum_str = getenv(verify_str);
+ vsum_str = env_get(verify_str);
if (vsum_str == NULL || strlen(vsum_str) != digits) {
printf("Expected %d hex digits in env var\n",
digits);
"and before environment is ready\n");
return NULL;
}
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
}
if (env_hwconfig) {
len += strlen(hdr->cmdline);
}
- char *bootargs = getenv("bootargs");
+ char *bootargs = env_get("bootargs");
if (bootargs)
len += strlen(bootargs);
of_len = *of_size + CONFIG_SYS_FDT_PAD;
/* If fdt_high is set use it to select the relocation address */
- fdt_high = getenv("fdt_high");
+ fdt_high = env_get("fdt_high");
if (fdt_high) {
void *desired_addr = (void *)simple_strtoul(fdt_high, NULL, 16);
ulong getenv_bootm_low(void)
{
- char *s = getenv("bootm_low");
+ char *s = env_get("bootm_low");
if (s) {
ulong tmp = simple_strtoul(s, NULL, 16);
return tmp;
{
phys_size_t tmp, size;
phys_addr_t start;
- char *s = getenv("bootm_size");
+ char *s = env_get("bootm_size");
if (s) {
tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
return tmp;
size = gd->bd->bi_memsize;
#endif
- s = getenv("bootm_low");
+ s = env_get("bootm_low");
if (s)
tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
else
phys_size_t getenv_bootm_mapsize(void)
{
phys_size_t tmp;
- char *s = getenv("bootm_mapsize");
+ char *s = env_get("bootm_mapsize");
if (s) {
tmp = (phys_size_t)simple_strtoull(s, NULL, 16);
return tmp;
ulong initrd_high;
int initrd_copy_to_ram = 1;
- if ((s = getenv("initrd_high")) != NULL) {
+ s = env_get("initrd_high");
+ if (s) {
/* a value of "no" or a similar string will act like 0,
* turning the "load high" feature off. This is intentional.
*/
if (cmdline == NULL)
return -1;
- if ((s = getenv("bootargs")) == NULL)
+ s = env_get("bootargs");
+ if (!s)
s = "";
strcpy(cmdline, s);
/* Paint the logo and retrieve LCD base address */
debug("[LCD] Drawing the logo...\n");
if (do_splash) {
- s = getenv("splashimage");
+ s = env_get("splashimage");
if (s) {
do_splash = 0;
addr = simple_strtoul(s, NULL, 16);
#ifdef CONFIG_PREBOOT
char *p;
- p = getenv("preboot");
+ p = env_get("preboot");
if (p != NULL) {
# ifdef CONFIG_AUTOBOOT_KEYED
int prev = disable_ctrlc(1); /* disable Control C checking */
needed in SPL as it has a much simpler task with less
configuration. But some boards use this to support 'Falcon' boot
on EXT2 and FAT, where SPL boots directly into Linux without
- starting U-Boot first. Enabling this option will make getenv()
+ starting U-Boot first. Enabling this option will make env_get()
and env_set() available in SPL.
config SPL_SAVEENV
/* set default environment */
set_default_env(0);
- str_env = getenv(dfu_alt_info);
+ str_env = env_get(dfu_alt_info);
if (!str_env) {
error("\"dfu_alt_info\" env variable not defined!\n");
return -EINVAL;
return -1;
}
#if defined(CONFIG_SPL_ENV_SUPPORT)
- file = getenv("falcon_args_file");
+ file = env_get("falcon_args_file");
if (file) {
err = ext4fs_open(file, &filelen);
if (err < 0) {
file, err);
goto defaults;
}
- file = getenv("falcon_image_file");
+ file = env_get("falcon_image_file");
if (file) {
err = spl_load_image_ext(spl_image, block_dev,
partition, file);
return err;
#if defined(CONFIG_SPL_ENV_SUPPORT) && defined(CONFIG_SPL_OS_BOOT)
- file = getenv("falcon_args_file");
+ file = env_get("falcon_args_file");
if (file) {
err = file_fat_read(file, (void *)CONFIG_SYS_SPL_ARGS_ADDR, 0);
if (err <= 0) {
file, err);
goto defaults;
}
- file = getenv("falcon_image_file");
+ file = env_get("falcon_image_file");
if (file) {
err = spl_load_image_fat(spl_image, block_dev,
partition, file);
#ifdef CONFIG_SPLASH_SCREEN_ALIGN
void splash_get_pos(int *x, int *y)
{
- char *s = getenv("splashpos");
+ char *s = env_get("splashpos");
if (!s)
return;
loff_t actread;
char *splash_file;
- splash_file = getenv("splashfile");
+ splash_file = env_get("splashfile");
if (!splash_file)
splash_file = SPLASH_SOURCE_DEFAULT_FILE_NAME;
if (!locations || size == 0)
return NULL;
- env_splashsource = getenv("splashsource");
+ env_splashsource = env_get("splashsource");
if (env_splashsource == NULL)
return &locations[0];
char *env_splashimage_value;
u32 bmp_load_addr;
- env_splashimage_value = getenv("splashimage");
+ env_splashimage_value = env_get("splashimage");
if (env_splashimage_value == NULL)
return -ENOENT;
/* save used globals and env variable */
saved_timeout_msecs = tftp_timeout_ms;
saved_timeout_count = tftp_timeout_count_max;
- saved_netretry = strdup(getenv("netretry"));
+ saved_netretry = strdup(env_get("netretry"));
saved_bootfile = strdup(net_boot_file_name);
/* set timeouts for auto-update */
printf("Auto-update from TFTP: ");
/* get the file name of the update file */
- filename = getenv(UPDATE_FILE_ENV);
+ filename = env_get(UPDATE_FILE_ENV);
if (filename == NULL) {
printf("failed, env. variable '%s' not found\n",
UPDATE_FILE_ENV);
printf("trying update file '%s'\n", filename);
/* get load address of downloaded update file */
- if ((env_addr = getenv("loadaddr")) != NULL)
+ env_addr = env_get("loadaddr");
+ if (env_addr)
addr = simple_strtoul(env_addr, NULL, 16);
else
addr = CONFIG_UPDATE_LOAD_ADDR;
* but allow this time to be increased via env variable as some
* devices break the spec and require longer warm-up times
*/
- env = getenv("usb_pgood_delay");
+ env = env_get("usb_pgood_delay");
if (env)
pgood_delay = max(pgood_delay,
(unsigned)simple_strtol(env, NULL, 0));
if (error)
return error;
- stdinname = getenv("stdin");
+ stdinname = env_get("stdin");
#if CONFIG_IS_ENABLED(CONSOLE_MUX)
error = iomux_doenv(stdin, stdinname);
if (error)
if (stdio_deregister_dev(dev, force) != 0)
return 1;
#if CONFIG_IS_ENABLED(CONSOLE_MUX)
- if (iomux_doenv(stdin, getenv("stdin")) != 0)
+ if (iomux_doenv(stdin, env_get("stdin")) != 0)
return 1;
#endif
#ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
goto err;
}
#if CONFIG_IS_ENABLED(CONSOLE_MUX)
- if (iomux_doenv(stdin, getenv("stdin"))) {
+ if (iomux_doenv(stdin, env_get("stdin"))) {
ret = -ENOLINK;
goto err;
}
/* If no dev_part_str, use bootdevice environment variable */
if (!dev_part_str || !strlen(dev_part_str) ||
!strcmp(dev_part_str, "-"))
- dev_part_str = getenv("bootdevice");
+ dev_part_str = env_get("bootdevice");
/* If still no dev_part_str, it's an error */
if (!dev_part_str) {
int limit;
char *s;
- s = getenv("amiga_scanlimit");
+ s = env_get("amiga_scanlimit");
if (s)
limit = simple_strtoul(s, NULL, 10);
else
int limit;
char *s;
- s = getenv("amiga_scanlimit");
+ s = env_get("amiga_scanlimit");
if (s)
limit = simple_strtoul(s, NULL, 10);
else
#define CTLR_INTLV_MASK 0x20000000
/* Perform build-in test on memory. Three-way interleaving is not yet
* supported by this code. */
- if (getenv_f("ddr_bist", buffer, CONFIG_SYS_CBSIZE) >= 0) {
+ if (env_get_f("ddr_bist", buffer, CONFIG_SYS_CBSIZE) >= 0) {
puts("Running BIST test. This will take a while...");
cs0_config = ddr_in32(&ddr->cs0_config);
cs0_bnds = ddr_in32(&ddr->cs0_bnds);
{
char buffer[CONFIG_SYS_CBSIZE];
- if (getenv_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0)
+ if (env_get_f("ddr_interactive", buffer, CONFIG_SYS_CBSIZE) >= 0)
return 1;
return 0;
};
if (var_is_set) {
- if (getenv_f("ddr_interactive", buffer2, CONFIG_SYS_CBSIZE) > 0) {
+ if (env_get_f("ddr_interactive", buffer2,
+ CONFIG_SYS_CBSIZE) > 0)
p = buffer2;
- } else {
+ else
var_is_set = 0;
- }
}
/*
* Use our own stack based buffer before relocation to allow accessing longer
* hwconfig strings that might be in the environment before we've relocated.
* This is pretty fragile on both the use of stack and if the buffer is big
- * enough. However we will get a warning from getenv_f for the later.
+ * enough. However we will get a warning from env_get_f() for the latter.
*/
/* Board-specific functions defined in each board's ddr.c */
* Extract hwconfig from environment since we have not properly setup
* the environment but need it for ddr config params
*/
- if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+ if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
buf = buffer;
#if defined(CONFIG_SYS_FSL_DDR3) || \
* Extract hwconfig from environment since we have not properly setup
* the environment but need it for ddr config params
*/
- if (getenv_f("hwconfig", buffer, sizeof(buffer)) > 0)
+ if (env_get_f("hwconfig", buffer, sizeof(buffer)) > 0)
buf = buffer;
/* if hwconfig is not enabled, or "sdram" is not defined, use spd */
#ifdef CONFIG_SET_DFU_ALT_INFO
set_dfu_alt_info(interface, devstr);
#endif
- str_env = getenv("dfu_alt_info");
+ str_env = env_get("dfu_alt_info");
if (!str_env) {
error("\"dfu_alt_info\" env variable not defined!\n");
return -EINVAL;
if (dfu_buf != NULL)
return dfu_buf;
- s = getenv("dfu_bufsiz");
+ s = env_get("dfu_bufsiz");
if (s)
dfu_buf_size = (unsigned long)simple_strtol(s, NULL, 0);
{
char *s;
- s = getenv("dfu_hash_algo");
+ s = env_get("dfu_hash_algo");
if (!s)
return NULL;
}
if (op != DFU_OP_WRITE) {
- str_env = getenv("filesize");
+ str_env = env_get("filesize");
if (str_env == NULL) {
puts("dfu: Wrong file size!\n");
return -1;
/* Init keyboard device (default US layout) */
keymap = KBD_US;
- penv = getenv("keymap");
+ penv = env_get("keymap");
if (penv != NULL) {
if (strncmp(penv, "de", 3) == 0)
keymap = KBD_GER;
error = stdio_register(dev);
/* check if this is the standard input device */
- if (!error && strcmp(getenv("stdin"), dev->name) == 0) {
+ if (!error && strcmp(env_get("stdin"), dev->name) == 0) {
/* reassign the console */
if (OVERWRITE_CONSOLE ||
console_assign(stdin, dev->name))
#ifdef CONFIG_SYS_FLASH_PROTECTION
/* read environment from EEPROM */
char s[64];
- getenv_f("unlock", s, sizeof(s));
+ env_get_f("unlock", s, sizeof(s));
#endif
#ifdef CONFIG_CFI_FLASH /* for driver model */
sprintf(mac, "eth%daddr", fec->dev_id);
else
strcpy(mac, "ethaddr");
- if (!getenv(mac))
+ if (!env_get(mac))
eth_env_set_enetaddr(mac, ethaddr);
}
return ret;
* Extract hwconfig from environment since environment
* is not setup yet
*/
- getenv_f("hwconfig", buffer, sizeof(buffer));
+ env_get_f("hwconfig", buffer, sizeof(buffer));
buf = buffer;
/* check if XFI interface enable in hwconfig for 10g */
return;
/* If the environment variable is not set, then exit silently */
- p = getenv("fman_ucode");
+ p = env_get("fman_ucode");
if (!p)
return;
{
unsigned long timeout_ms = CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS;
- char *timeout_ms_env_var = getenv(MC_BOOT_TIMEOUT_ENV_VAR);
+ char *timeout_ms_env_var = env_get(MC_BOOT_TIMEOUT_ENV_VAR);
if (timeout_ms_env_var) {
timeout_ms = simple_strtoul(timeout_ms_env_var, NULL, 10);
{
unsigned long dram_block_size = CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE;
- char *dram_block_size_env_var = getenv(MC_MEM_SIZE_ENV_VAR);
+ char *dram_block_size_env_var = env_get(MC_MEM_SIZE_ENV_VAR);
if (dram_block_size_env_var) {
dram_block_size = simple_strtoul(dram_block_size_env_var, NULL,
* address info properly. Without MAC addresses, the MC code
* can not properly initialize the DPC.
*/
- mc_boot_env_var = getenv(MC_BOOT_ENV_VAR);
+ mc_boot_env_var = env_get(MC_BOOT_ENV_VAR);
if (mc_boot_env_var)
run_command_list(mc_boot_env_var, -1, 0);
#endif /* CONFIG_FSL_MC_ENET */
/* update only when the environment has changed */
if (env_changed_id != env_id) {
- if (getenv("ncip")) {
+ if (env_get("ncip")) {
nc_ip = getenv_ip("ncip");
if (!nc_ip.s_addr)
return -1; /* ncip is 0.0.0.0 */
- p = strchr(getenv("ncip"), ':');
+ p = strchr(env_get("ncip"), ':');
if (p != NULL) {
nc_out_port = simple_strtoul(p + 1, NULL, 10);
nc_in_port = nc_out_port;
nc_ip.s_addr = ~0; /* ncip is not set, so broadcast */
}
- p = getenv("ncoutport");
+ p = env_get("ncoutport");
if (p != NULL)
nc_out_port = simple_strtoul(p, NULL, 10);
- p = getenv("ncinport");
+ p = env_get("ncinport");
if (p != NULL)
nc_in_port = simple_strtoul(p, NULL, 10);
if (ret)
return ret;
- if (getenv("disable_giga"))
+ if (env_get("disable_giga"))
features &= ~(SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full);
/* force master mode for 1000BaseT due to chip errata */
return ret;
/* add an option to disable the gigabit feature of this PHY */
- if (getenv("disable_giga")) {
+ if (env_get("disable_giga")) {
unsigned features;
unsigned bmcr;
#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
/* boot from PCIE --master */
- char *s = getenv("bootmaster");
+ char *s = env_get("bootmaster");
char pcie[6];
sprintf(pcie, "PCIE%d", pci_info->pci_num);
#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
} else {
/* boot from PCIE --master releases slave's core 0 */
- char *s = getenv("bootmaster");
+ char *s = env_get("bootmaster");
char pcie[6];
sprintf(pcie, "PCIE%d", pci_info->pci_num);
if (!gd->pcidelay_done) {
/* wait "pcidelay" ms (if defined)... */
- s = getenv("pcidelay");
+ s = env_get("pcidelay");
if (s) {
int val = simple_strtoul(s, NULL, 10);
for (i = 0; i < val; i++)
hose_head = NULL;
/* allow env to disable pci init/enum */
- if (getenv("pcidisable") != NULL)
+ if (env_get("pcidisable") != NULL)
return;
/* now call board specific pci_init()... */
/*
* Only skip configuration if "pciconfighost" is not set
*/
- if (getenv("pciconfighost") == NULL)
+ if (env_get("pciconfighost") == NULL)
return 1;
#else
return 1;
void rtc_reset(void)
{
uchar *const data = rtc_validate();
- char const *const s = getenv("rtccal");
+ char const *const s = env_get("rtccal");
if (!data)
return;
int snlen;
/* Ger seiral number */
- if (!(sn = getenv("serial#"))) {
+ sn = env_get("serial#");
+ if (!sn)
sn = "000000000000";
- }
snlen = strlen(sn);
if (snlen > sizeof(serial_number) - 1) {
printf ("Warning: serial number %s is too long (%d > %lu)\n",
/* Decide on which type of UDC device to be.
*/
-
- if(!(tt = getenv("usbtty"))) {
+ tt = env_get("usbtty");
+ if (!tt)
tt = "generic";
- }
usbtty_init_terminal_type(strcmp(tt,"cdc_acm"));
/* prepare buffers... */
if ((ep != 0) && (udc_device->device_state < STATE_ADDRESSED))
return;
- tt = getenv("usbtty");
+ tt = env_get("usbtty");
if (!tt)
tt = "generic";
strlcpy(host_addr, CONFIG_USBNET_HOST_ADDR, sizeof(host_addr));
#endif
/* Check if the user overruled the MAC addresses */
- if (getenv("usbnet_devaddr"))
- strlcpy(dev_addr, getenv("usbnet_devaddr"),
+ if (env_get("usbnet_devaddr"))
+ strlcpy(dev_addr, env_get("usbnet_devaddr"),
sizeof(dev_addr));
- if (getenv("usbnet_hostaddr"))
- strlcpy(host_addr, getenv("usbnet_hostaddr"),
+ if (env_get("usbnet_hostaddr"))
+ strlcpy(host_addr, env_get("usbnet_hostaddr"),
sizeof(host_addr));
if (!is_eth_addr_valid(dev_addr)) {
gadget = dev->gadget;
usb_gadget_connect(gadget);
- if (getenv("cdc_connect_timeout"))
- timeout = simple_strtoul(getenv("cdc_connect_timeout"),
+ if (env_get("cdc_connect_timeout"))
+ timeout = simple_strtoul(env_get("cdc_connect_timeout"),
NULL, 10) * CONFIG_SYS_HZ;
ts = get_timer(0);
while (!dev->network_started) {
cdev->req->context = f_dfu;
- s = getenv("serial#");
+ s = env_get("serial#");
if (s)
g_dnl_set_serialnumber((char *)s);
f->hs_descriptors = fb_hs_function;
}
- s = getenv("serial#");
+ s = env_get("serial#");
if (s)
g_dnl_set_serialnumber((char *)s);
sprintf(str_num, "0x%08x", CONFIG_FASTBOOT_BUF_SIZE);
strncat(response, str_num, chars_left);
} else if (!strcmp_l1("serialno", cmd)) {
- s = getenv("serial#");
+ s = env_get("serial#");
if (s)
strncat(response, s, chars_left);
else
}
sprintf(envstr, "fastboot.%s", cmd);
- s = getenv(envstr);
+ s = env_get(envstr);
if (s) {
strncat(response, s, chars_left);
} else {
"phy_type", &len);
#endif
else
- phy_type = getenv("usb_phy_type");
+ phy_type = env_get("usb_phy_type");
if (!phy_type) {
#ifdef CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
/* get video mode via environment */
- if ((penv = getenv ("videomode")) != NULL) {
+ penv = env_get("videomode");
+ if (penv) {
/* deceide if it is a string */
if (penv[0] <= '9') {
videomode = (int) simple_strtoul (penv, NULL, 16);
splash_get_pos(&video_logo_xpos, &video_logo_ypos);
#ifdef CONFIG_SPLASH_SCREEN
- s = getenv("splashimage");
+ s = env_get("splashimage");
if (s != NULL) {
ret = splash_screen_prepare();
if (ret < 0)
tmp = 0;
videomode = 0x310;
/* get video mode via environment */
- if ((penv = getenv ("videomode")) != NULL) {
+ penv = env_get("videomode");
+ if (penv) {
/* decide if it is a string */
if (penv[0] <= '9') {
videomode = (int) simple_strtoul (penv, NULL, 16);
videomode = CONFIG_SYS_DEFAULT_VIDEO_MODE;
/* get video mode via environment */
- penv = getenv("videomode");
+ penv = env_get("videomode");
if (penv) {
/* decide if it is a string */
if (penv[0] <= '9') {
puts("Video: ");
/* Suck display configuration from "videomode" variable */
- penv = getenv("videomode");
+ penv = env_get("videomode");
if (!penv) {
puts("MXSFB: 'videomode' variable not set!\n");
return NULL;
/* first search for the environment containing the real param string */
s = penv;
- if ((p = getenv (s)) != NULL)
+ p = env_get(s);
+ if (p)
s = p;
/*
int video_get_video_mode(unsigned int *xres, unsigned int *yres,
unsigned int *depth, unsigned int *freq, const char **options)
{
- char *p = getenv("video-mode");
+ char *p = env_get("video-mode");
if (!p)
return 0;
int ret = 1;
if (first_call) {
- callback_list = getenv(ENV_CALLBACK_VAR);
+ callback_list = env_get(ENV_CALLBACK_VAR);
first_call = 0;
}
*/
int getenv_yesno(const char *var)
{
- char *s = getenv(var);
+ char *s = env_get(var);
if (s == NULL)
return -1;
/* Pretend that the image is bad. */
gd->flags &= ~GD_FLG_ENV_READY;
gd->env_valid = 0;
- ret_val = getenv(name);
+ ret_val = env_get(name);
gd->env_valid = really_valid;
gd->flags = real_gd_flags;
return ret_val;
#include "fw_env.h"
#include <env_attr.h>
#include <env_flags.h>
-#define getenv fw_getenv
+#define env_get fw_getenv
#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
#else
#include <common.h>
*/
enum env_flags_vartype env_flags_get_type(const char *name)
{
- const char *flags_list = getenv(ENV_FLAGS_VAR);
+ const char *flags_list = env_get(ENV_FLAGS_VAR);
char flags[ENV_FLAGS_ATTR_MAX_LEN + 1];
if (env_flags_lookup(flags_list, name, flags))
*/
enum env_flags_varaccess env_flags_get_varaccess(const char *name)
{
- const char *flags_list = getenv(ENV_FLAGS_VAR);
+ const char *flags_list = env_get(ENV_FLAGS_VAR);
char flags[ENV_FLAGS_ATTR_MAX_LEN + 1];
if (env_flags_lookup(flags_list, name, flags))
int ret = 1;
if (first_call) {
- flags_list = getenv(ENV_FLAGS_VAR);
+ flags_list = env_get(ENV_FLAGS_VAR);
first_call = 0;
}
/* look in the ".flags" and static for a reference to this variable */
if (ep == argv[3] || *ep != '\0')
return CMD_RET_USAGE;
} else {
- addr_str = getenv("loadaddr");
+ addr_str = env_get("loadaddr");
if (addr_str != NULL)
addr = simple_strtoul(addr_str, NULL, 16);
else
if (argc >= 5) {
filename = argv[4];
} else {
- filename = getenv("bootfile");
+ filename = env_get("bootfile");
if (!filename) {
puts("** No boot file defined **\n");
return 1;
EXPORT_FUNC(vprintf, int, vprintf, const char *, va_list)
EXPORT_FUNC(do_reset, int, do_reset, cmd_tbl_t *,
int , int , char * const [])
- EXPORT_FUNC(getenv, char *, getenv, const char*)
+ EXPORT_FUNC(env_get, char *, env_get, const char*)
EXPORT_FUNC(env_set, int, env_set, const char *, const char *)
EXPORT_FUNC(simple_strtoul, unsigned long, simple_strtoul,
const char *, char **, unsigned int)
struct device_node *of_root;
#endif
struct jt_funcs *jt; /* jump table */
- char env_buf[32]; /* buffer for getenv() before reloc. */
+ char env_buf[32]; /* buffer for env_get() before reloc. */
#ifdef CONFIG_TRACE
void *trace_buff; /* The trace buffer */
#endif
void env_relocate (void);
int envmatch (uchar *, int);
-/* Avoid unfortunate conflict with libc's getenv() */
-#ifdef CONFIG_SANDBOX
-#define getenv uboot_getenv
-#endif
-char *getenv (const char *);
-int getenv_f (const char *name, char *buf, unsigned len);
+/**
+ * env_get() - Look up the value of an environment variable
+ *
+ * In U-Boot proper this can be called before relocation (which is when the
+ * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that
+ * case this function calls env_get_f().
+ *
+ * @varname: Variable to look up
+ * @return value of variable, or NULL if not found
+ */
+char *env_get(const char *varname);
+
+/**
+ * env_get_f() - Look up the value of an environment variable (early)
+ *
+ * This function is called from env_get() if the environment has not been
+ * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will
+ * support reading the value (slowly) and some will not.
+ *
+ * @varname: Variable to look up
+ * @return value of variable, or NULL if not found
+ */
+int env_get_f(const char *name, char *buf, unsigned len);
+
ulong getenv_ulong(const char *name, int base, ulong default_val);
/**
#include <net.h>
static inline struct in_addr getenv_ip(char *var)
{
- return string_to_ip(getenv(var));
+ return string_to_ip(env_get(var));
}
int pcmcia_init (void);
int vprintf(const char *, va_list);
unsigned long simple_strtoul(const char *cp, char **endp, unsigned int base);
int strict_strtoul(const char *cp, unsigned int base, unsigned long *res);
-char *getenv (const char *name);
+char *env_get(const char *name);
int env_set(const char *varname, const char *value);
long simple_strtol(const char *cp, char **endp, unsigned int base);
int strcmp(const char *cs, const char *ct);
bd_t *kbd;
#endif
- int verify; /* getenv("verify")[0] != 'n' */
+ int verify; /* env_get("verify")[0] != 'n' */
#define BOOTM_STATE_START (0x00000001)
#define BOOTM_STATE_FINDOS (0x00000002)
{
struct smbios_type1 *t = (struct smbios_type1 *)*current;
int len = sizeof(struct smbios_type1);
- char *serial_str = getenv("serial#");
+ char *serial_str = env_get("serial#");
memset(t, 0, sizeof(struct smbios_type1));
fill_smbios_header(t, SMBIOS_SYSTEM_INFORMATION, len, handle);
static u8 *add_vci(u8 *e)
{
char *vci = NULL;
- char *env_vci = getenv("bootp_vci");
+ char *env_vci = env_get("bootp_vci");
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING)
vci = CONFIG_SPL_NET_VCI_STRING;
*e++ = tmp & 0xff;
}
#if defined(CONFIG_BOOTP_SEND_HOSTNAME)
- hostname = getenv("hostname");
+ hostname = env_get("hostname");
if (hostname) {
int hostnamelen = strlen(hostname);
clientarch = CONFIG_BOOTP_PXE_CLIENTARCH;
#endif
- if (getenv("bootp_arch"))
+ if (env_get("bootp_arch"))
clientarch = getenv_ulong("bootp_arch", 16, clientarch);
if (clientarch > 0) {
*e++ = 0; /* minor revision */
#ifdef CONFIG_LIB_UUID
- uuid = getenv("pxeuuid");
+ uuid = env_get("pxeuuid");
if (uuid) {
if (uuid_str_valid(uuid)) {
dhcp_state = INIT;
#endif
- ep = getenv("bootpretryperiod");
+ ep = env_get("bootpretryperiod");
if (ep != NULL)
time_taken_max = simple_strtoul(ep, NULL, 10);
else
int eth_init(void)
{
- char *ethact = getenv("ethact");
- char *ethrotate = getenv("ethrotate");
+ char *ethact = env_get("ethact");
+ char *ethrotate = env_get("ethrotate");
struct udevice *current = NULL;
struct udevice *old_current;
int ret = -ENODEV;
printf("No ethernet found.\n");
bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
} else {
- char *ethprime = getenv("ethprime");
+ char *ethprime = env_get("ethprime");
struct udevice *prime_dev = NULL;
if (ethprime)
int eth_getenv_enetaddr(const char *name, uchar *enetaddr)
{
- eth_parse_enetaddr(getenv(name), enetaddr);
+ eth_parse_enetaddr(env_get(name), enetaddr);
return is_valid_ethaddr(enetaddr);
}
char *skip_state;
sprintf(enetvar, index ? "eth%dmacskip" : "ethmacskip", index);
- skip_state = getenv(enetvar);
+ skip_state = env_get(enetvar);
return skip_state != NULL;
}
void eth_current_changed(void)
{
- char *act = getenv("ethact");
+ char *act = env_get("ethact");
char *ethrotate;
/*
* ethernet device if uc_priv->current == NULL. This is not what
* we want when 'ethrotate' variable is 'no'.
*/
- ethrotate = getenv("ethrotate");
+ ethrotate = env_get("ethrotate");
if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0))
return;
* Do not rotate between network interfaces when
* 'ethrotate' variable is set to 'no'.
*/
- ethrotate = getenv("ethrotate");
+ ethrotate = env_get("ethrotate");
if ((ethrotate != NULL) && (strcmp(ethrotate, "no") == 0))
return;
env_id = get_env_id();
if ((act == NULL) || (env_changed_id != env_id)) {
- act = getenv("ethact");
+ act = env_get("ethact");
env_changed_id = env_id;
}
if (act == NULL) {
- char *ethprime = getenv("ethprime");
+ char *ethprime = env_get("ethprime");
void *dev = NULL;
if (ethprime)
bootstage_error(BOOTSTAGE_ID_NET_ETH_START);
} else {
struct eth_device *dev = eth_devices;
- char *ethprime = getenv("ethprime");
+ char *ethprime = env_get("ethprime");
bootstage_mark(BOOTSTAGE_ID_NET_ETH_INIT);
do {
void net_auto_load(void)
{
#if defined(CONFIG_CMD_NFS)
- const char *s = getenv("autoload");
+ const char *s = env_get("autoload");
if (s != NULL && strcmp(s, "NFS") == 0) {
/*
unsigned long retrycnt = 0;
int ret;
- nretry = getenv("netretry");
+ nretry = env_get("netretry");
if (nretry) {
if (!strcmp(nretry, "yes"))
retry_forever = 1;
ushort getenv_vlan(char *var)
{
- return string_to_vlan(getenv(var));
+ return string_to_vlan(env_get(var));
}
* TFTP protocol has a minimal timeout of 1 second.
*/
- ep = getenv("tftpblocksize");
+ ep = env_get("tftpblocksize");
if (ep != NULL)
tftp_block_size_option = simple_strtol(ep, NULL, 10);
- ep = getenv("tftptimeout");
+ ep = env_get("tftptimeout");
if (ep != NULL)
timeout_ms = simple_strtol(ep, NULL, 10);
timeout_ms = 1000;
}
- ep = getenv("tftptimeoutcountmax");
+ ep = env_get("tftptimeoutcountmax");
if (ep != NULL)
tftp_timeout_count_max = simple_strtol(ep, NULL, 10);
tftp_our_port = 1024 + (get_timer(0) % 3072);
#ifdef CONFIG_TFTP_PORT
- ep = getenv("tftpdstp");
+ ep = env_get("tftpdstp");
if (ep != NULL)
tftp_remote_port = simple_strtol(ep, NULL, 10);
- ep = getenv("tftpsrcp");
+ ep = env_get("tftpsrcp");
if (ep != NULL)
tftp_our_port = simple_strtol(ep, NULL, 10);
#endif
int i, j;
for (i = 0; i < varnum; i++) {
- if (getenv_f(var[i], list, sizeof(list)) <= 0)
+ if (env_get_f(var[i], list, sizeof(list)) <= 0)
continue;
for (j = 0; j < post_list_size; j++)
/* commands separated by \n */
run_command_list("setenv list 1\n setenv list ${list}1", -1, 0);
- assert(!strcmp("11", getenv("list")));
+ assert(!strcmp("11", env_get("list")));
/* command followed by \n and nothing else */
run_command_list("setenv list 1${list}\n", -1, 0);
- assert(!strcmp("111", getenv("list")));
+ assert(!strcmp("111", env_get("list")));
/* a command string with \0 in it. Stuff after \0 should be ignored */
run_command("setenv list", 0);
run_command_list(test_cmd, sizeof(test_cmd), 0);
- assert(!strcmp("123", getenv("list")));
+ assert(!strcmp("123", env_get("list")));
/*
* a command list where we limit execution to only the first command
*/
run_command_list("setenv list 1\n setenv list ${list}2; "
"setenv list ${list}3", strlen("setenv list 1"), 0);
- assert(!strcmp("1", getenv("list")));
+ assert(!strcmp("1", env_get("list")));
assert(run_command("false", 0) == 1);
assert(run_command("echo", 0) == 0);
#ifdef CONFIG_HUSH_PARSER
run_command("setenv foo 'setenv black 1\nsetenv adder 2'", 0);
run_command("run foo", 0);
- assert(getenv("black") != NULL);
- assert(!strcmp("1", getenv("black")));
- assert(getenv("adder") != NULL);
- assert(!strcmp("2", getenv("adder")));
+ assert(env_get("black") != NULL);
+ assert(!strcmp("1", env_get("black")));
+ assert(env_get("adder") != NULL);
+ assert(!strcmp("2", env_get("adder")));
#endif
assert(run_command("", 0) == 0);
env_set("ethact", "eth@10002000");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10002000", getenv("ethact"));
+ ut_asserteq_str("eth@10002000", env_get("ethact"));
env_set("ethact", "eth@10003000");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10003000", getenv("ethact"));
+ ut_asserteq_str("eth@10003000", env_get("ethact"));
env_set("ethact", "eth@10004000");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10004000", getenv("ethact"));
+ ut_asserteq_str("eth@10004000", env_get("ethact"));
return 0;
}
net_ping_ip = string_to_ip("1.1.2.2");
env_set("ethact", "eth0");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10002000", getenv("ethact"));
+ ut_asserteq_str("eth@10002000", env_get("ethact"));
env_set("ethact", "eth1");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10004000", getenv("ethact"));
+ ut_asserteq_str("eth@10004000", env_get("ethact"));
/* Expected to fail since eth2 is not defined in the device tree */
env_set("ethact", "eth2");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10002000", getenv("ethact"));
+ ut_asserteq_str("eth@10002000", env_get("ethact"));
env_set("ethact", "eth5");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10003000", getenv("ethact"));
+ ut_asserteq_str("eth@10003000", env_get("ethact"));
return 0;
}
env_set("ethact", NULL);
env_set("ethprime", "eth5");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10003000", getenv("ethact"));
+ ut_asserteq_str("eth@10003000", env_get("ethact"));
/* Expected to be "eth@10002000" because it is first */
env_set("ethact", NULL);
env_set("ethprime", NULL);
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10002000", getenv("ethact"));
+ ut_asserteq_str("eth@10002000", env_get("ethact"));
return 0;
}
ut_assertok(device_remove(dev[i], DM_REMOVE_NORMAL));
/* Invalidate MAC address */
- strcpy(ethaddr[i], getenv(addrname[i]));
+ strcpy(ethaddr[i], env_get(addrname[i]));
/* Must disable access protection for ethaddr before clearing */
env_set(".flags", addrname[i]);
env_set(addrname[i], NULL);
/* Make sure that the default is to rotate to the next interface */
env_set("ethact", "eth@10004000");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10002000", getenv("ethact"));
+ ut_asserteq_str("eth@10002000", env_get("ethact"));
/* If ethrotate is no, then we should fail on a bad MAC */
env_set("ethact", "eth@10004000");
env_set("ethrotate", "no");
ut_asserteq(-EINVAL, net_loop(PING));
- ut_asserteq_str("eth@10004000", getenv("ethact"));
+ ut_asserteq_str("eth@10004000", env_get("ethact"));
return 0;
}
/* Make sure we can skip invalid devices */
env_set("ethact", "eth@10004000");
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10004000", getenv("ethact"));
+ ut_asserteq_str("eth@10004000", env_get("ethact"));
/* Make sure we can handle device name which is not eth# */
env_set("ethact", "sbe5");
ut_assertok(net_loop(PING));
- ut_asserteq_str("sbe5", getenv("ethact"));
+ ut_asserteq_str("sbe5", env_get("ethact"));
return 0;
}
net_ping_ip = string_to_ip("1.1.2.2");
/* Invalidate eth1's MAC address */
- strcpy(ethaddr, getenv("eth1addr"));
+ strcpy(ethaddr, env_get("eth1addr"));
/* Must disable access protection for eth1addr before clearing */
env_set(".flags", "eth1addr");
env_set("eth1addr", NULL);
if (!retval) {
/* Invalidate eth0's MAC address */
- strcpy(ethaddr, getenv("ethaddr"));
+ strcpy(ethaddr, env_get("ethaddr"));
/* Must disable access protection for ethaddr before clearing */
env_set(".flags", "ethaddr");
env_set("ethaddr", NULL);
env_set("netretry", "yes");
sandbox_eth_skip_timeout();
ut_assertok(net_loop(PING));
- ut_asserteq_str("eth@10002000", getenv("ethact"));
+ ut_asserteq_str("eth@10002000", env_get("ethact"));
/*
* eth1 is disabled and netretry is no, so the ping should fail and the
env_set("netretry", "no");
sandbox_eth_skip_timeout();
ut_asserteq(-ETIMEDOUT, net_loop(PING));
- ut_asserteq_str("eth@10004000", getenv("ethact"));
+ ut_asserteq_str("eth@10004000", env_get("ethact"));
return 0;
}
projects / oweals / u-boot.git / commitdiff