KERNEL_PATCHVER:=$(KERNEL_TESTING_PATCHVER)
endif
-LINUX_VERSION-4.14 = .202
+LINUX_VERSION-4.14 = .209
-LINUX_KERNEL_HASH-4.14.202 = a0e1cee699f874a78b879652e90d5d35fda4782a50f47bf2b3844896ee532976
+LINUX_KERNEL_HASH-4.14.209 = 67a114697352783152b00e472de78649f91665cbf600e062d749123f29704cd0
remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
-@@ -1463,7 +1463,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
+@@ -1464,7 +1464,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE
config SERIAL_AR933X
tristate "AR933X serial port support"
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
-@@ -2001,7 +2001,8 @@ static const struct usb_device_id option
+@@ -2011,7 +2011,8 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) },
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1903,6 +1903,13 @@ config TRIM_UNUSED_KSYMS
+@@ -1904,6 +1904,13 @@ config TRIM_UNUSED_KSYMS
If unsure, or if you need to build out-of-tree modules, say N.
+#endif
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1009,6 +1009,10 @@ config RELAY
+@@ -1010,6 +1010,10 @@ config RELAY
If unsure, say N.
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1081,6 +1081,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
+@@ -1082,6 +1082,17 @@ config SYSCTL_ARCH_UNALIGN_ALLOW
the unaligned access emulation.
see arch/parisc/kernel/unaligned.c for reference
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
-@@ -199,6 +199,7 @@ config PPC
+@@ -200,6 +200,7 @@ config PPC
select HAVE_IOREMAP_PROT
select HAVE_IRQ_EXIT_ON_IRQ_STACK
select HAVE_KERNEL_GZIP
#include <linux/uaccess.h>
#include "br_private.h"
-@@ -346,6 +350,28 @@ static const struct ethtool_ops br_ethto
+@@ -347,6 +351,28 @@ static const struct ethtool_ops br_ethto
.get_link = ethtool_op_get_link,
};
static const struct net_device_ops br_netdev_ops = {
.ndo_open = br_dev_open,
.ndo_stop = br_dev_stop,
-@@ -373,6 +399,9 @@ static const struct net_device_ops br_ne
+@@ -374,6 +400,9 @@ static const struct net_device_ops br_ne
.ndo_bridge_setlink = br_setlink,
.ndo_bridge_dellink = br_dellink,
.ndo_features_check = passthru_features_check,
--- a/init/Kconfig
+++ b/init/Kconfig
-@@ -1427,6 +1427,15 @@ config EMBEDDED
+@@ -1428,6 +1428,15 @@ config EMBEDDED
an embedded system so certain expert options are available
for configuration.
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
+@@ -1936,6 +1936,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
The command-line arguments provided by the boot loader will be
appended to the the device tree bootargs property.
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
-@@ -1168,6 +1168,7 @@ static int sfp_remove(struct platform_de
+@@ -1169,6 +1169,7 @@ static int sfp_remove(struct platform_de
static const struct of_device_id sfp_of_match[] = {
{ .compatible = "sff,sfp", },
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -96,6 +96,33 @@
+@@ -100,6 +100,33 @@
status = "okay";
};
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -93,9 +93,31 @@
+@@ -97,9 +97,31 @@
cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
marvell,pad-type = "sd";
vqmmc-supply = <&vcc_sd_reg1>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -123,25 +123,9 @@
+@@ -127,25 +127,9 @@
flash@0 {
reg = <0>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -153,7 +153,7 @@
+@@ -157,7 +157,7 @@
dsa,member = <0 0>;
--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -79,6 +79,8 @@
+@@ -83,6 +83,8 @@
/* J9 */
&pcie0 {
status = "okay";