Thierry Reding <thierry.reding@avionic-design.de>
- plutux Tegra2 (ARM7 & A9 Dual Core)
- medcom Tegra2 (ARM7 & A9 Dual Core)
- tec Tegra2 (ARM7 & A9 Dual Core)
+ plutux Tegra20 (ARM7 & A9 Dual Core)
+ medcom Tegra20 (ARM7 & A9 Dual Core)
+ tec Tegra20 (ARM7 & A9 Dual Core)
Christian Riesch <christian.riesch@omicron.at>
Manfred Rudigier <manfred.rudigier@omicron.at>
Tom Warren <twarren@nvidia.com>
- harmony Tegra2 (ARM7 & A9 Dual Core)
- seaboard Tegra2 (ARM7 & A9 Dual Core)
+ harmony Tegra20 (ARM7 & A9 Dual Core)
+ seaboard Tegra20 (ARM7 & A9 Dual Core)
Tom Warren <twarren@nvidia.com>
Stephen Warren <swarren@nvidia.com>
- ventana Tegra2 (ARM7 & A9 Dual Core)
- paz00 Tegra2 (ARM7 & A9 Dual Core)
- trimslice Tegra2 (ARM7 & A9 Dual Core)
- whistler Tegra2 (ARM7 & A9 Dual Core)
+ ventana Tegra20 (ARM7 & A9 Dual Core)
+ paz00 Tegra20 (ARM7 & A9 Dual Core)
+ trimslice Tegra20 (ARM7 & A9 Dual Core)
+ whistler Tegra20 (ARM7 & A9 Dual Core)
Stephen Warren <swarren@wwwdotorg.org>
orr r0, r0, #0xd3
msr cpsr,r0
-#if !defined(CONFIG_TEGRA2)
+#if !defined(CONFIG_TEGRA20)
/*
* Setup vector:
* (OMAP4 spl TEXT_BASE is not 32 byte aligned.
ldr r0, =_start
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
#endif
-#endif /* !Tegra2 */
+#endif /* !Tegra20 */
/* the mask ROM code should have PLL and others stable */
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
/*
* Move vector table
*/
-#if !defined(CONFIG_TEGRA2)
+#if !defined(CONFIG_TEGRA20)
#if !(defined(CONFIG_OMAP44XX) && defined(CONFIG_SPL_BUILD))
/* Set vector address in CP15 VBAR register */
ldr r0, =_start
add r0, r0, r9
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
#endif
-#endif /* !Tegra2 */
+#endif /* !Tegra20 */
ldr r0, _board_init_r_ofs
adr r1, _start
+++ /dev/null
-#
-# (C) Copyright 2010,2011 Nvidia Corporation.
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# The AVP is ARMv4T architecture so we must use special compiler
-# flags for any startup files it might use.
-CFLAGS_arch/arm/cpu/armv7/tegra2/ap20.o += -march=armv4t
-CFLAGS_arch/arm/cpu/armv7/tegra2/clock.o += -march=armv4t
-CFLAGS_arch/arm/cpu/armv7/tegra2/warmboot_avp.o += -march=armv4t
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(SOC).o
-
-SOBJS := lowlevel_init.o
-COBJS-y := ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
-COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
-COBJS-$(CONFIG_TEGRA_PMU) += pmu.o
-COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
-COBJS-$(CONFIG_TEGRA2_LP0) += crypto.o warmboot.o warmboot_avp.o
-COBJS-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
-
-COBJS := $(COBJS-y)
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
-* (C) Copyright 2010-2011
-* NVIDIA Corporation <www.nvidia.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#include <asm/io.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/ap20.h>
-#include <asm/arch/clk_rst.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/fuse.h>
-#include <asm/arch/gp_padctrl.h>
-#include <asm/arch/pmc.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/scu.h>
-#include <asm/arch/warmboot.h>
-#include <common.h>
-
-int tegra_get_chip_type(void)
-{
- struct apb_misc_gp_ctlr *gp;
- struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE;
- uint tegra_sku_id, rev;
-
- /*
- * This is undocumented, Chip ID is bits 15:8 of the register
- * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
- * Tegra30
- */
- gp = (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE;
- rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
-
- tegra_sku_id = readl(&fuse->sku_info) & 0xff;
-
- switch (rev) {
- case CHIPID_TEGRA2:
- switch (tegra_sku_id) {
- case SKU_ID_T20:
- return TEGRA_SOC_T20;
- case SKU_ID_T25SE:
- case SKU_ID_AP25:
- case SKU_ID_T25:
- case SKU_ID_AP25E:
- case SKU_ID_T25E:
- return TEGRA_SOC_T25;
- }
- break;
- }
- /* unknown sku id */
- return TEGRA_SOC_UNKNOWN;
-}
-
-/* Returns 1 if the current CPU executing is a Cortex-A9, else 0 */
-static int ap20_cpu_is_cortexa9(void)
-{
- u32 id = readb(NV_PA_PG_UP_BASE + PG_UP_TAG_0);
- return id == (PG_UP_TAG_0_PID_CPU & 0xff);
-}
-
-void init_pllx(void)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- struct clk_pll_simple *pll =
- &clkrst->crc_pll_simple[CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE];
- u32 reg;
-
- /* If PLLX is already enabled, just return */
- if (readl(&pll->pll_base) & PLL_ENABLE_MASK)
- return;
-
- /* Set PLLX_MISC */
- writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc);
-
- /* Use 12MHz clock here */
- reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT);
- reg |= 1000 << PLL_DIVN_SHIFT;
- writel(reg, &pll->pll_base);
-
- reg |= PLL_ENABLE_MASK;
- writel(reg, &pll->pll_base);
-
- reg &= ~PLL_BYPASS_MASK;
- writel(reg, &pll->pll_base);
-}
-
-static void enable_cpu_clock(int enable)
-{
- struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 clk;
-
- /*
- * NOTE:
- * Regardless of whether the request is to enable or disable the CPU
- * clock, every processor in the CPU complex except the master (CPU 0)
- * will have it's clock stopped because the AVP only talks to the
- * master. The AVP does not know (nor does it need to know) that there
- * are multiple processors in the CPU complex.
- */
-
- if (enable) {
- /* Initialize PLLX */
- init_pllx();
-
- /* Wait until all clocks are stable */
- udelay(PLL_STABILIZATION_DELAY);
-
- writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
- writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
- }
-
- /*
- * Read the register containing the individual CPU clock enables and
- * always stop the clock to CPU 1.
- */
- clk = readl(&clkrst->crc_clk_cpu_cmplx);
- clk |= 1 << CPU1_CLK_STP_SHIFT;
-
- /* Stop/Unstop the CPU clock */
- clk &= ~CPU0_CLK_STP_MASK;
- clk |= !enable << CPU0_CLK_STP_SHIFT;
- writel(clk, &clkrst->crc_clk_cpu_cmplx);
-
- clock_enable(PERIPH_ID_CPU);
-}
-
-static int is_cpu_powered(void)
-{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
-
- return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0;
-}
-
-static void remove_cpu_io_clamps(void)
-{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
- u32 reg;
-
- /* Remove the clamps on the CPU I/O signals */
- reg = readl(&pmc->pmc_remove_clamping);
- reg |= CPU_CLMP;
- writel(reg, &pmc->pmc_remove_clamping);
-
- /* Give I/O signals time to stabilize */
- udelay(IO_STABILIZATION_DELAY);
-}
-
-static void powerup_cpu(void)
-{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
- u32 reg;
- int timeout = IO_STABILIZATION_DELAY;
-
- if (!is_cpu_powered()) {
- /* Toggle the CPU power state (OFF -> ON) */
- reg = readl(&pmc->pmc_pwrgate_toggle);
- reg &= PARTID_CP;
- reg |= START_CP;
- writel(reg, &pmc->pmc_pwrgate_toggle);
-
- /* Wait for the power to come up */
- while (!is_cpu_powered()) {
- if (timeout-- == 0)
- printf("CPU failed to power up!\n");
- else
- udelay(10);
- }
-
- /*
- * Remove the I/O clamps from CPU power partition.
- * Recommended only on a Warm boot, if the CPU partition gets
- * power gated. Shouldn't cause any harm when called after a
- * cold boot according to HW, probably just redundant.
- */
- remove_cpu_io_clamps();
- }
-}
-
-static void enable_cpu_power_rail(void)
-{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
- u32 reg;
-
- reg = readl(&pmc->pmc_cntrl);
- reg |= CPUPWRREQ_OE;
- writel(reg, &pmc->pmc_cntrl);
-
- /*
- * The TI PMU65861C needs a 3.75ms delay between enabling
- * the power rail and enabling the CPU clock. This delay
- * between SM1EN and SM1 is for switching time + the ramp
- * up of the voltage to the CPU (VDD_CPU from PMU).
- */
- udelay(3750);
-}
-
-static void reset_A9_cpu(int reset)
-{
- /*
- * NOTE: Regardless of whether the request is to hold the CPU in reset
- * or take it out of reset, every processor in the CPU complex
- * except the master (CPU 0) will be held in reset because the
- * AVP only talks to the master. The AVP does not know that there
- * are multiple processors in the CPU complex.
- */
-
- /* Hold CPU 1 in reset, and CPU 0 if asked */
- reset_cmplx_set_enable(1, crc_rst_cpu | crc_rst_de | crc_rst_debug, 1);
- reset_cmplx_set_enable(0, crc_rst_cpu | crc_rst_de | crc_rst_debug,
- reset);
-
- /* Enable/Disable master CPU reset */
- reset_set_enable(PERIPH_ID_CPU, reset);
-}
-
-static void clock_enable_coresight(int enable)
-{
- u32 rst, src;
-
- clock_set_enable(PERIPH_ID_CORESIGHT, enable);
- reset_set_enable(PERIPH_ID_CORESIGHT, !enable);
-
- if (enable) {
- /*
- * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by
- * 1.5, giving an effective frequency of 144MHz.
- * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor
- * (bits 7:0), so 00000001b == 1.5 (n+1 + .5)
- */
- src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000);
- clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
-
- /* Unlock the CPU CoreSight interfaces */
- rst = 0xC5ACCE55;
- writel(rst, CSITE_CPU_DBG0_LAR);
- writel(rst, CSITE_CPU_DBG1_LAR);
- }
-}
-
-void start_cpu(u32 reset_vector)
-{
- /* Enable VDD_CPU */
- enable_cpu_power_rail();
-
- /* Hold the CPUs in reset */
- reset_A9_cpu(1);
-
- /* Disable the CPU clock */
- enable_cpu_clock(0);
-
- /* Enable CoreSight */
- clock_enable_coresight(1);
-
- /*
- * Set the entry point for CPU execution from reset,
- * if it's a non-zero value.
- */
- if (reset_vector)
- writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
-
- /* Enable the CPU clock */
- enable_cpu_clock(1);
-
- /* If the CPU doesn't already have power, power it up */
- powerup_cpu();
-
- /* Take the CPU out of reset */
- reset_A9_cpu(0);
-}
-
-
-void halt_avp(void)
-{
- for (;;) {
- writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \
- | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)),
- FLOW_CTLR_HALT_COP_EVENTS);
- }
-}
-
-void enable_scu(void)
-{
- struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
- u32 reg;
-
- /* If SCU already setup/enabled, return */
- if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
- return;
-
- /* Invalidate all ways for all processors */
- writel(0xFFFF, &scu->scu_inv_all);
-
- /* Enable SCU - bit 0 */
- reg = readl(&scu->scu_ctrl);
- reg |= SCU_CTRL_ENABLE;
- writel(reg, &scu->scu_ctrl);
-}
-
-static u32 get_odmdata(void)
-{
- /*
- * ODMDATA is stored in the BCT in IRAM by the BootROM.
- * The BCT start and size are stored in the BIT in IRAM.
- * Read the data @ bct_start + (bct_size - 12). This works
- * on T20 and T30 BCTs, which are locked down. If this changes
- * in new chips (T114, etc.), we can revisit this algorithm.
- */
-
- u32 bct_start, odmdata;
-
- bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR);
- odmdata = readl(bct_start + BCT_ODMDATA_OFFSET);
-
- return odmdata;
-}
-
-void init_pmc_scratch(void)
-{
- struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
- u32 odmdata;
- int i;
-
- /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */
- for (i = 0; i < 23; i++)
- writel(0, &pmc->pmc_scratch1+i);
-
- /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
- odmdata = get_odmdata();
- writel(odmdata, &pmc->pmc_scratch20);
-
-#ifdef CONFIG_TEGRA2_LP0
- /* save Sdram params to PMC 2, 4, and 24 for WB0 */
- warmboot_save_sdram_params();
-#endif
-}
-
-void tegra2_start(void)
-{
- struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
-
- /* If we are the AVP, start up the first Cortex-A9 */
- if (!ap20_cpu_is_cortexa9()) {
- /* enable JTAG */
- writel(0xC0, &pmt->pmt_cfg_ctl);
-
- /*
- * If we are ARM7 - give it a different stack. We are about to
- * start up the A9 which will want to use this one.
- */
- asm volatile("mov sp, %0\n"
- : : "r"(AVP_EARLY_BOOT_STACK_LIMIT));
-
- start_cpu((u32)_start);
- halt_avp();
- /* not reached */
- }
-
- /* Init PMC scratch memory */
- init_pmc_scratch();
-
- enable_scu();
-
- /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */
- asm volatile(
- "mrc p15, 0, r0, c1, c0, 1\n"
- "orr r0, r0, #0x41\n"
- "mcr p15, 0, r0, c1, c0, 1\n");
-
- /* FIXME: should have ap20's L2 disabled too? */
-}
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ap20.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/funcmux.h>
-#include <asm/arch/pmc.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/tegra2.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-enum {
- /* UARTs which we can enable */
- UARTA = 1 << 0,
- UARTB = 1 << 1,
- UARTD = 1 << 3,
- UART_COUNT = 4,
-};
-
-/*
- * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0,
- * so we are using this value to identify memory size.
- */
-
-unsigned int query_sdram_size(void)
-{
- struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
- u32 reg;
-
- reg = readl(&pmc->pmc_scratch20);
- debug("pmc->pmc_scratch20 (ODMData) = 0x%08x\n", reg);
-
- /* bits 31:28 in OdmData are used for RAM size */
- switch ((reg) >> 28) {
- case 1:
- return 0x10000000; /* 256 MB */
- case 2:
- default:
- return 0x20000000; /* 512 MB */
- case 3:
- return 0x40000000; /* 1GB */
- }
-}
-
-int dram_init(void)
-{
- /* We do not initialise DRAM here. We just query the size */
- gd->ram_size = query_sdram_size();
- return 0;
-}
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
- printf("Board: %s\n", sysinfo.board_string);
- return 0;
-}
-#endif /* CONFIG_DISPLAY_BOARDINFO */
-
-#ifdef CONFIG_ARCH_CPU_INIT
-/*
- * Note this function is executed by the ARM7TDMI AVP. It does not return
- * in this case. It is also called once the A9 starts up, but does nothing in
- * that case.
- */
-int arch_cpu_init(void)
-{
- /* Fire up the Cortex A9 */
- tegra2_start();
-
- /* We didn't do this init in start.S, so do it now */
- cpu_init_cp15();
-
- /* Initialize essential common plls */
- clock_early_init();
-
- return 0;
-}
-#endif
-
-static int uart_configs[] = {
-#if defined(CONFIG_TEGRA2_UARTA_UAA_UAB)
- FUNCMUX_UART1_UAA_UAB,
-#elif defined(CONFIG_TEGRA2_UARTA_GPU)
- FUNCMUX_UART1_GPU,
-#elif defined(CONFIG_TEGRA2_UARTA_SDIO1)
- FUNCMUX_UART1_SDIO1,
-#else
- FUNCMUX_UART1_IRRX_IRTX,
-#endif
- FUNCMUX_UART2_IRDA,
- -1,
- FUNCMUX_UART4_GMC,
- -1,
-};
-
-/**
- * Set up the specified uarts
- *
- * @param uarts_ids Mask containing UARTs to init (UARTx)
- */
-static void setup_uarts(int uart_ids)
-{
- static enum periph_id id_for_uart[] = {
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
- PERIPH_ID_UART3,
- PERIPH_ID_UART4,
- };
- size_t i;
-
- for (i = 0; i < UART_COUNT; i++) {
- if (uart_ids & (1 << i)) {
- enum periph_id id = id_for_uart[i];
-
- funcmux_select(id, uart_configs[i]);
- clock_ll_start_uart(id);
- }
- }
-}
-
-void board_init_uart_f(void)
-{
- int uart_ids = 0; /* bit mask of which UART ids to enable */
-
-#ifdef CONFIG_TEGRA2_ENABLE_UARTA
- uart_ids |= UARTA;
-#endif
-#ifdef CONFIG_TEGRA2_ENABLE_UARTB
- uart_ids |= UARTB;
-#endif
-#ifdef CONFIG_TEGRA2_ENABLE_UARTD
- uart_ids |= UARTD;
-#endif
- setup_uarts(uart_ids);
-}
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Tegra2 Clock control functions */
-
-#include <asm/io.h>
-#include <asm/arch/clk_rst.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/timer.h>
-#include <asm/arch/tegra2.h>
-#include <common.h>
-#include <div64.h>
-#include <fdtdec.h>
-
-/*
- * This is our record of the current clock rate of each clock. We don't
- * fill all of these in since we are only really interested in clocks which
- * we use as parents.
- */
-static unsigned pll_rate[CLOCK_ID_COUNT];
-
-/*
- * The oscillator frequency is fixed to one of four set values. Based on this
- * the other clocks are set up appropriately.
- */
-static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
- 13000000,
- 19200000,
- 12000000,
- 26000000,
-};
-
-/*
- * Clock types that we can use as a source. The Tegra2 has muxes for the
- * peripheral clocks, and in most cases there are four options for the clock
- * source. This gives us a clock 'type' and exploits what commonality exists
- * in the device.
- *
- * Letters are obvious, except for T which means CLK_M, and S which means the
- * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
- * datasheet) and PLL_M are different things. The former is the basic
- * clock supplied to the SOC from an external oscillator. The latter is the
- * memory clock PLL.
- *
- * See definitions in clock_id in the header file.
- */
-enum clock_type_id {
- CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
- CLOCK_TYPE_MCPA, /* and so on */
- CLOCK_TYPE_MCPT,
- CLOCK_TYPE_PCM,
- CLOCK_TYPE_PCMT,
- CLOCK_TYPE_PCMT16, /* CLOCK_TYPE_PCMT with 16-bit divider */
- CLOCK_TYPE_PCXTS,
- CLOCK_TYPE_PDCT,
-
- CLOCK_TYPE_COUNT,
- CLOCK_TYPE_NONE = -1, /* invalid clock type */
-};
-
-/* return 1 if a peripheral ID is in range */
-#define clock_type_id_isvalid(id) ((id) >= 0 && \
- (id) < CLOCK_TYPE_COUNT)
-
-char pllp_valid = 1; /* PLLP is set up correctly */
-
-enum {
- CLOCK_MAX_MUX = 4 /* number of source options for each clock */
-};
-
-/*
- * Clock source mux for each clock type. This just converts our enum into
- * a list of mux sources for use by the code. Note that CLOCK_TYPE_PCXTS
- * is special as it has 5 sources. Since it also has a different number of
- * bits in its register for the source, we just handle it with a special
- * case in the code.
- */
-#define CLK(x) CLOCK_ID_ ## x
-static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX] = {
- { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC) },
- { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO) },
- { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC) },
- { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE) },
- { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
- { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
- { CLK(PERIPH), CLK(CGENERAL), CLK(XCPU), CLK(OSC) },
- { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC) },
-};
-
-/*
- * Clock peripheral IDs which sadly don't match up with PERIPH_ID. This is
- * not in the header file since it is for purely internal use - we want
- * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
- * confusion bewteen PERIPH_ID_... and PERIPHC_...
- *
- * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
- * confusing.
- *
- * Note to SOC vendors: perhaps define a unified numbering for peripherals and
- * use it for reset, clock enable, clock source/divider and even pinmuxing
- * if you can.
- */
-enum periphc_internal_id {
- /* 0x00 */
- PERIPHC_I2S1,
- PERIPHC_I2S2,
- PERIPHC_SPDIF_OUT,
- PERIPHC_SPDIF_IN,
- PERIPHC_PWM,
- PERIPHC_SPI1,
- PERIPHC_SPI2,
- PERIPHC_SPI3,
-
- /* 0x08 */
- PERIPHC_XIO,
- PERIPHC_I2C1,
- PERIPHC_DVC_I2C,
- PERIPHC_TWC,
- PERIPHC_0c,
- PERIPHC_10, /* PERIPHC_SPI1, what is this really? */
- PERIPHC_DISP1,
- PERIPHC_DISP2,
-
- /* 0x10 */
- PERIPHC_CVE,
- PERIPHC_IDE0,
- PERIPHC_VI,
- PERIPHC_1c,
- PERIPHC_SDMMC1,
- PERIPHC_SDMMC2,
- PERIPHC_G3D,
- PERIPHC_G2D,
-
- /* 0x18 */
- PERIPHC_NDFLASH,
- PERIPHC_SDMMC4,
- PERIPHC_VFIR,
- PERIPHC_EPP,
- PERIPHC_MPE,
- PERIPHC_MIPI,
- PERIPHC_UART1,
- PERIPHC_UART2,
-
- /* 0x20 */
- PERIPHC_HOST1X,
- PERIPHC_21,
- PERIPHC_TVO,
- PERIPHC_HDMI,
- PERIPHC_24,
- PERIPHC_TVDAC,
- PERIPHC_I2C2,
- PERIPHC_EMC,
-
- /* 0x28 */
- PERIPHC_UART3,
- PERIPHC_29,
- PERIPHC_VI_SENSOR,
- PERIPHC_2b,
- PERIPHC_2c,
- PERIPHC_SPI4,
- PERIPHC_I2C3,
- PERIPHC_SDMMC3,
-
- /* 0x30 */
- PERIPHC_UART4,
- PERIPHC_UART5,
- PERIPHC_VDE,
- PERIPHC_OWR,
- PERIPHC_NOR,
- PERIPHC_CSITE,
-
- PERIPHC_COUNT,
-
- PERIPHC_NONE = -1,
-};
-
-/* return 1 if a periphc_internal_id is in range */
-#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
- (id) < PERIPHC_COUNT)
-
-/*
- * Clock type for each peripheral clock source. We put the name in each
- * record just so it is easy to match things up
- */
-#define TYPE(name, type) type
-static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
- /* 0x00 */
- TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
- TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
- TYPE(PERIPHC_PWM, CLOCK_TYPE_PCXTS),
- TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_SPI22, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_SPI3, CLOCK_TYPE_PCMT),
-
- /* 0x08 */
- TYPE(PERIPHC_XIO, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_TWC, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_DISP1, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_DISP2, CLOCK_TYPE_PDCT),
-
- /* 0x10 */
- TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_IDE0, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
-
- /* 0x18 */
- TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
-
- /* 0x20 */
- TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_HDMI, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
- TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
-
- /* 0x28 */
- TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
- TYPE(PERIPHC_SPI4, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
- TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
-
- /* 0x30 */
- TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
- TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
-};
-
-/*
- * This array translates a periph_id to a periphc_internal_id
- *
- * Not present/matched up:
- * uint vi_sensor; _VI_SENSOR_0, 0x1A8
- * SPDIF - which is both 0x08 and 0x0c
- *
- */
-#define NONE(name) (-1)
-#define OFFSET(name, value) PERIPHC_ ## name
-static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
- /* Low word: 31:0 */
- NONE(CPU),
- NONE(RESERVED1),
- NONE(RESERVED2),
- NONE(AC97),
- NONE(RTC),
- NONE(TMR),
- PERIPHC_UART1,
- PERIPHC_UART2, /* and vfir 0x68 */
-
- /* 0x08 */
- NONE(GPIO),
- PERIPHC_SDMMC2,
- NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
- PERIPHC_I2S1,
- PERIPHC_I2C1,
- PERIPHC_NDFLASH,
- PERIPHC_SDMMC1,
- PERIPHC_SDMMC4,
-
- /* 0x10 */
- PERIPHC_TWC,
- PERIPHC_PWM,
- PERIPHC_I2S2,
- PERIPHC_EPP,
- PERIPHC_VI,
- PERIPHC_G2D,
- NONE(USBD),
- NONE(ISP),
-
- /* 0x18 */
- PERIPHC_G3D,
- PERIPHC_IDE0,
- PERIPHC_DISP2,
- PERIPHC_DISP1,
- PERIPHC_HOST1X,
- NONE(VCP),
- NONE(RESERVED30),
- NONE(CACHE2),
-
- /* Middle word: 63:32 */
- NONE(MEM),
- NONE(AHBDMA),
- NONE(APBDMA),
- NONE(RESERVED35),
- NONE(KBC),
- NONE(STAT_MON),
- NONE(PMC),
- NONE(FUSE),
-
- /* 0x28 */
- NONE(KFUSE),
- NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
- PERIPHC_NOR,
- PERIPHC_SPI1,
- PERIPHC_SPI2,
- PERIPHC_XIO,
- PERIPHC_SPI3,
- PERIPHC_DVC_I2C,
-
- /* 0x30 */
- NONE(DSI),
- PERIPHC_TVO, /* also CVE 0x40 */
- PERIPHC_MIPI,
- PERIPHC_HDMI,
- PERIPHC_CSITE,
- PERIPHC_TVDAC,
- PERIPHC_I2C2,
- PERIPHC_UART3,
-
- /* 0x38 */
- NONE(RESERVED56),
- PERIPHC_EMC,
- NONE(USB2),
- NONE(USB3),
- PERIPHC_MPE,
- PERIPHC_VDE,
- NONE(BSEA),
- NONE(BSEV),
-
- /* Upper word 95:64 */
- NONE(SPEEDO),
- PERIPHC_UART4,
- PERIPHC_UART5,
- PERIPHC_I2C3,
- PERIPHC_SPI4,
- PERIPHC_SDMMC3,
- NONE(PCIE),
- PERIPHC_OWR,
-
- /* 0x48 */
- NONE(AFI),
- NONE(CORESIGHT),
- NONE(RESERVED74),
- NONE(AVPUCQ),
- NONE(RESERVED76),
- NONE(RESERVED77),
- NONE(RESERVED78),
- NONE(RESERVED79),
-
- /* 0x50 */
- NONE(RESERVED80),
- NONE(RESERVED81),
- NONE(RESERVED82),
- NONE(RESERVED83),
- NONE(IRAMA),
- NONE(IRAMB),
- NONE(IRAMC),
- NONE(IRAMD),
-
- /* 0x58 */
- NONE(CRAM2),
-};
-
-/*
- * Get the oscillator frequency, from the corresponding hardware configuration
- * field.
- */
-enum clock_osc_freq clock_get_osc_freq(void)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 reg;
-
- reg = readl(&clkrst->crc_osc_ctrl);
- return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
-}
-
-int clock_get_osc_bypass(void)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 reg;
-
- reg = readl(&clkrst->crc_osc_ctrl);
- return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
-}
-
-/* Returns a pointer to the registers of the given pll */
-static struct clk_pll *get_pll(enum clock_id clkid)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
-
- assert(clock_id_is_pll(clkid));
- return &clkrst->crc_pll[clkid];
-}
-
-int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
- u32 *divp, u32 *cpcon, u32 *lfcon)
-{
- struct clk_pll *pll = get_pll(clkid);
- u32 data;
-
- assert(clkid != CLOCK_ID_USB);
-
- /* Safety check, adds to code size but is small */
- if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
- return -1;
- data = readl(&pll->pll_base);
- *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- *divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
- *divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
- data = readl(&pll->pll_misc);
- *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
- *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
-
- return 0;
-}
-
-unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
- u32 divp, u32 cpcon, u32 lfcon)
-{
- struct clk_pll *pll = get_pll(clkid);
- u32 data;
-
- /*
- * We cheat by treating all PLL (except PLLU) in the same fashion.
- * This works only because:
- * - same fields are always mapped at same offsets, except DCCON
- * - DCCON is always 0, doesn't conflict
- * - M,N, P of PLLP values are ignored for PLLP
- */
- data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
- writel(data, &pll->pll_misc);
-
- data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
- (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
-
- if (clkid == CLOCK_ID_USB)
- data |= divp << PLLU_VCO_FREQ_SHIFT;
- else
- data |= divp << PLL_DIVP_SHIFT;
- writel(data, &pll->pll_base);
-
- /* calculate the stable time */
- return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
-}
-
-/* return 1 if a peripheral ID is in range and valid */
-static int clock_periph_id_isvalid(enum periph_id id)
-{
- if (id < PERIPH_ID_FIRST || id >= PERIPH_ID_COUNT)
- printf("Peripheral id %d out of range\n", id);
- else {
- switch (id) {
- case PERIPH_ID_RESERVED1:
- case PERIPH_ID_RESERVED2:
- case PERIPH_ID_RESERVED30:
- case PERIPH_ID_RESERVED35:
- case PERIPH_ID_RESERVED56:
- case PERIPH_ID_RESERVED74:
- case PERIPH_ID_RESERVED76:
- case PERIPH_ID_RESERVED77:
- case PERIPH_ID_RESERVED78:
- case PERIPH_ID_RESERVED79:
- case PERIPH_ID_RESERVED80:
- case PERIPH_ID_RESERVED81:
- case PERIPH_ID_RESERVED82:
- case PERIPH_ID_RESERVED83:
- printf("Peripheral id %d is reserved\n", id);
- break;
- default:
- return 1;
- }
- }
- return 0;
-}
-
-/* Returns a pointer to the clock source register for a peripheral */
-static u32 *get_periph_source_reg(enum periph_id periph_id)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- enum periphc_internal_id internal_id;
-
- assert(clock_periph_id_isvalid(periph_id));
- internal_id = periph_id_to_internal_id[periph_id];
- assert(internal_id != -1);
- return &clkrst->crc_clk_src[internal_id];
-}
-
-void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
- unsigned divisor)
-{
- u32 *reg = get_periph_source_reg(periph_id);
- u32 value;
-
- value = readl(reg);
-
- value &= ~OUT_CLK_SOURCE_MASK;
- value |= source << OUT_CLK_SOURCE_SHIFT;
-
- value &= ~OUT_CLK_DIVISOR_MASK;
- value |= divisor << OUT_CLK_DIVISOR_SHIFT;
-
- writel(value, reg);
-}
-
-void clock_ll_set_source(enum periph_id periph_id, unsigned source)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
- source << OUT_CLK_SOURCE_SHIFT);
-}
-
-/**
- * Given the parent's rate and the required rate for the children, this works
- * out the peripheral clock divider to use, in 7.1 binary format.
- *
- * @param divider_bits number of divider bits (8 or 16)
- * @param parent_rate clock rate of parent clock in Hz
- * @param rate required clock rate for this clock
- * @return divider which should be used
- */
-static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
- unsigned long rate)
-{
- u64 divider = parent_rate * 2;
- unsigned max_divider = 1 << divider_bits;
-
- divider += rate - 1;
- do_div(divider, rate);
-
- if ((s64)divider - 2 < 0)
- return 0;
-
- if ((s64)divider - 2 >= max_divider)
- return -1;
-
- return divider - 2;
-}
-
-/**
- * Given the parent's rate and the divider in 7.1 format, this works out the
- * resulting peripheral clock rate.
- *
- * @param parent_rate clock rate of parent clock in Hz
- * @param divider which should be used in 7.1 format
- * @return effective clock rate of peripheral
- */
-static unsigned long get_rate_from_divider(unsigned long parent_rate,
- int divider)
-{
- u64 rate;
-
- rate = (u64)parent_rate * 2;
- do_div(rate, divider + 2);
- return rate;
-}
-
-unsigned long clock_get_periph_rate(enum periph_id periph_id,
- enum clock_id parent)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- return get_rate_from_divider(pll_rate[parent],
- (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
-}
-
-/**
- * Find the best available 7.1 format divisor given a parent clock rate and
- * required child clock rate. This function assumes that a second-stage
- * divisor is available which can divide by powers of 2 from 1 to 256.
- *
- * @param divider_bits number of divider bits (8 or 16)
- * @param parent_rate clock rate of parent clock in Hz
- * @param rate required clock rate for this clock
- * @param extra_div value for the second-stage divisor (not set if this
- * function returns -1.
- * @return divider which should be used, or -1 if nothing is valid
- *
- */
-static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
- unsigned long rate, int *extra_div)
-{
- int shift;
- int best_divider = -1;
- int best_error = rate;
-
- /* try dividers from 1 to 256 and find closest match */
- for (shift = 0; shift <= 8 && best_error > 0; shift++) {
- unsigned divided_parent = parent_rate >> shift;
- int divider = clk_get_divider(divider_bits, divided_parent,
- rate);
- unsigned effective_rate = get_rate_from_divider(divided_parent,
- divider);
- int error = rate - effective_rate;
-
- /* Given a valid divider, look for the lowest error */
- if (divider != -1 && error < best_error) {
- best_error = error;
- *extra_div = 1 << shift;
- best_divider = divider;
- }
- }
-
- /* return what we found - *extra_div will already be set */
- return best_divider;
-}
-
-/**
- * Given a peripheral ID and the required source clock, this returns which
- * value should be programmed into the source mux for that peripheral.
- *
- * There is special code here to handle the one source type with 5 sources.
- *
- * @param periph_id peripheral to start
- * @param source PLL id of required parent clock
- * @param mux_bits Set to number of bits in mux register: 2 or 4
- * @param divider_bits Set to number of divider bits (8 or 16)
- * @return mux value (0-4, or -1 if not found)
- */
-static int get_periph_clock_source(enum periph_id periph_id,
- enum clock_id parent, int *mux_bits, int *divider_bits)
-{
- enum clock_type_id type;
- enum periphc_internal_id internal_id;
- int mux;
-
- assert(clock_periph_id_isvalid(periph_id));
-
- internal_id = periph_id_to_internal_id[periph_id];
- assert(periphc_internal_id_isvalid(internal_id));
-
- type = clock_periph_type[internal_id];
- assert(clock_type_id_isvalid(type));
-
- /*
- * Special cases here for the clock with a 4-bit source mux and I2C
- * with its 16-bit divisor
- */
- if (type == CLOCK_TYPE_PCXTS)
- *mux_bits = 4;
- else
- *mux_bits = 2;
- if (type == CLOCK_TYPE_PCMT16)
- *divider_bits = 16;
- else
- *divider_bits = 8;
-
- for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
- if (clock_source[type][mux] == parent)
- return mux;
-
- /*
- * Not found: it might be looking for the 'S' in CLOCK_TYPE_PCXTS
- * which is not in our table. If not, then they are asking for a
- * source which this peripheral can't access through its mux.
- */
- assert(type == CLOCK_TYPE_PCXTS);
- assert(parent == CLOCK_ID_SFROM32KHZ);
- if (type == CLOCK_TYPE_PCXTS && parent == CLOCK_ID_SFROM32KHZ)
- return 4; /* mux value for this clock */
-
- /* if we get here, either us or the caller has made a mistake */
- printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
- parent);
- return -1;
-}
-
-/**
- * Adjust peripheral PLL to use the given divider and source.
- *
- * @param periph_id peripheral to adjust
- * @param source Source number (0-3 or 0-7)
- * @param mux_bits Number of mux bits (2 or 4)
- * @param divider Required divider in 7.1 or 15.1 format
- * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
- * for this peripheral)
- */
-static int adjust_periph_pll(enum periph_id periph_id, int source,
- int mux_bits, unsigned divider)
-{
- u32 *reg = get_periph_source_reg(periph_id);
-
- clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
- divider << OUT_CLK_DIVISOR_SHIFT);
- udelay(1);
-
- /* work out the source clock and set it */
- if (source < 0)
- return -1;
- if (mux_bits == 4) {
- clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
- source << OUT_CLK_SOURCE4_SHIFT);
- } else {
- clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
- source << OUT_CLK_SOURCE_SHIFT);
- }
- udelay(2);
- return 0;
-}
-
-unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
- enum clock_id parent, unsigned rate, int *extra_div)
-{
- unsigned effective_rate;
- int mux_bits, divider_bits, source;
- int divider;
-
- /* work out the source clock and set it */
- source = get_periph_clock_source(periph_id, parent, &mux_bits,
- ÷r_bits);
-
- if (extra_div)
- divider = find_best_divider(divider_bits, pll_rate[parent],
- rate, extra_div);
- else
- divider = clk_get_divider(divider_bits, pll_rate[parent],
- rate);
- assert(divider >= 0);
- if (adjust_periph_pll(periph_id, source, mux_bits, divider))
- return -1U;
- debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
- get_periph_source_reg(periph_id),
- readl(get_periph_source_reg(periph_id)));
-
- /* Check what we ended up with. This shouldn't matter though */
- effective_rate = clock_get_periph_rate(periph_id, parent);
- if (extra_div)
- effective_rate /= *extra_div;
- if (rate != effective_rate)
- debug("Requested clock rate %u not honored (got %u)\n",
- rate, effective_rate);
- return effective_rate;
-}
-
-unsigned clock_start_periph_pll(enum periph_id periph_id,
- enum clock_id parent, unsigned rate)
-{
- unsigned effective_rate;
-
- reset_set_enable(periph_id, 1);
- clock_enable(periph_id);
-
- effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
- NULL);
-
- reset_set_enable(periph_id, 0);
- return effective_rate;
-}
-
-void clock_set_enable(enum periph_id periph_id, int enable)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
- u32 reg;
-
- /* Enable/disable the clock to this peripheral */
- assert(clock_periph_id_isvalid(periph_id));
- reg = readl(clk);
- if (enable)
- reg |= PERIPH_MASK(periph_id);
- else
- reg &= ~PERIPH_MASK(periph_id);
- writel(reg, clk);
-}
-
-void clock_enable(enum periph_id clkid)
-{
- clock_set_enable(clkid, 1);
-}
-
-void clock_disable(enum periph_id clkid)
-{
- clock_set_enable(clkid, 0);
-}
-
-void reset_set_enable(enum periph_id periph_id, int enable)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
- u32 reg;
-
- /* Enable/disable reset to the peripheral */
- assert(clock_periph_id_isvalid(periph_id));
- reg = readl(reset);
- if (enable)
- reg |= PERIPH_MASK(periph_id);
- else
- reg &= ~PERIPH_MASK(periph_id);
- writel(reg, reset);
-}
-
-void reset_periph(enum periph_id periph_id, int us_delay)
-{
- /* Put peripheral into reset */
- reset_set_enable(periph_id, 1);
- udelay(us_delay);
-
- /* Remove reset */
- reset_set_enable(periph_id, 0);
-
- udelay(us_delay);
-}
-
-void reset_cmplx_set_enable(int cpu, int which, int reset)
-{
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 mask;
-
- /* Form the mask, which depends on the cpu chosen. Tegra2 has 2 */
- assert(cpu >= 0 && cpu < 2);
- mask = which << cpu;
-
- /* either enable or disable those reset for that CPU */
- if (reset)
- writel(mask, &clkrst->crc_cpu_cmplx_set);
- else
- writel(mask, &clkrst->crc_cpu_cmplx_clr);
-}
-
-unsigned clock_get_rate(enum clock_id clkid)
-{
- struct clk_pll *pll;
- u32 base;
- u32 divm;
- u64 parent_rate;
- u64 rate;
-
- parent_rate = osc_freq[clock_get_osc_freq()];
- if (clkid == CLOCK_ID_OSC)
- return parent_rate;
-
- pll = get_pll(clkid);
- base = readl(&pll->pll_base);
-
- /* Oh for bf_unpack()... */
- rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
- divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
- if (clkid == CLOCK_ID_USB)
- divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
- else
- divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
- do_div(rate, divm);
- return rate;
-}
-
-/**
- * Set the output frequency you want for each PLL clock.
- * PLL output frequencies are programmed by setting their N, M and P values.
- * The governing equations are:
- * VCO = (Fi / m) * n, Fo = VCO / (2^p)
- * where Fo is the output frequency from the PLL.
- * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
- * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
- * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
- *
- * @param n PLL feedback divider(DIVN)
- * @param m PLL input divider(DIVN)
- * @param p post divider(DIVP)
- * @param cpcon base PLL charge pump(CPCON)
- * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
- * be overriden), 1 if PLL is already correct
- */
-static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
-{
- u32 base_reg;
- u32 misc_reg;
- struct clk_pll *pll;
-
- pll = get_pll(clkid);
-
- base_reg = readl(&pll->pll_base);
-
- /* Set BYPASS, m, n and p to PLL_BASE */
- base_reg &= ~PLL_DIVM_MASK;
- base_reg |= m << PLL_DIVM_SHIFT;
-
- base_reg &= ~PLL_DIVN_MASK;
- base_reg |= n << PLL_DIVN_SHIFT;
-
- base_reg &= ~PLL_DIVP_MASK;
- base_reg |= p << PLL_DIVP_SHIFT;
-
- if (clkid == CLOCK_ID_PERIPH) {
- /*
- * If the PLL is already set up, check that it is correct
- * and record this info for clock_verify() to check.
- */
- if (base_reg & PLL_BASE_OVRRIDE_MASK) {
- base_reg |= PLL_ENABLE_MASK;
- if (base_reg != readl(&pll->pll_base))
- pllp_valid = 0;
- return pllp_valid ? 1 : -1;
- }
- base_reg |= PLL_BASE_OVRRIDE_MASK;
- }
-
- base_reg |= PLL_BYPASS_MASK;
- writel(base_reg, &pll->pll_base);
-
- /* Set cpcon to PLL_MISC */
- misc_reg = readl(&pll->pll_misc);
- misc_reg &= ~PLL_CPCON_MASK;
- misc_reg |= cpcon << PLL_CPCON_SHIFT;
- writel(misc_reg, &pll->pll_misc);
-
- /* Enable PLL */
- base_reg |= PLL_ENABLE_MASK;
- writel(base_reg, &pll->pll_base);
-
- /* Disable BYPASS */
- base_reg &= ~PLL_BYPASS_MASK;
- writel(base_reg, &pll->pll_base);
-
- return 0;
-}
-
-void clock_ll_start_uart(enum periph_id periph_id)
-{
- /* Assert UART reset and enable clock */
- reset_set_enable(periph_id, 1);
- clock_enable(periph_id);
- clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
-
- /* wait for 2us */
- udelay(2);
-
- /* De-assert reset to UART */
- reset_set_enable(periph_id, 0);
-}
-
-#ifdef CONFIG_OF_CONTROL
-/*
- * Convert a device tree clock ID to our peripheral ID. They are mostly
- * the same but we are very cautious so we check that a valid clock ID is
- * provided.
- *
- * @param clk_id Clock ID according to tegra2 device tree binding
- * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
- */
-static enum periph_id clk_id_to_periph_id(int clk_id)
-{
- if (clk_id > 95)
- return PERIPH_ID_NONE;
-
- switch (clk_id) {
- case 1:
- case 2:
- case 7:
- case 10:
- case 20:
- case 30:
- case 35:
- case 49:
- case 56:
- case 74:
- case 76:
- case 77:
- case 78:
- case 79:
- case 80:
- case 81:
- case 82:
- case 83:
- case 91:
- case 95:
- return PERIPH_ID_NONE;
- default:
- return clk_id;
- }
-}
-
-int clock_decode_periph_id(const void *blob, int node)
-{
- enum periph_id id;
- u32 cell[2];
- int err;
-
- err = fdtdec_get_int_array(blob, node, "clocks", cell,
- ARRAY_SIZE(cell));
- if (err)
- return -1;
- id = clk_id_to_periph_id(cell[1]);
- assert(clock_periph_id_isvalid(id));
- return id;
-}
-#endif /* CONFIG_OF_CONTROL */
-
-int clock_verify(void)
-{
- struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
- u32 reg = readl(&pll->pll_base);
-
- if (!pllp_valid) {
- printf("Warning: PLLP %x is not correct\n", reg);
- return -1;
- }
- debug("PLLX %x is correct\n", reg);
- return 0;
-}
-
-void clock_early_init(void)
-{
- /*
- * PLLP output frequency set to 216MHz
- * PLLC output frequency set to 600Mhz
- *
- * TODO: Can we calculate these values instead of hard-coding?
- */
- switch (clock_get_osc_freq()) {
- case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
- clock_set_rate(CLOCK_ID_PERIPH, 432, 12, 1, 8);
- clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
- break;
-
- case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
- clock_set_rate(CLOCK_ID_PERIPH, 432, 26, 1, 8);
- clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
- break;
-
- case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
- clock_set_rate(CLOCK_ID_PERIPH, 432, 13, 1, 8);
- clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
- break;
- case CLOCK_OSC_FREQ_19_2:
- default:
- /*
- * These are not supported. It is too early to print a
- * message and the UART likely won't work anyway due to the
- * oscillator being wrong.
- */
- break;
- }
-}
-
-void clock_init(void)
-{
- pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
- pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
- pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
- pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
- pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
- debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
- debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
- debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
-}
+++ /dev/null
-/*
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * Derived from code (arch/arm/lib/reset.c) that is:
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * (C) Copyright 2004 Texas Insturments
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <common.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/pmc.h>
-
-static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc,
- char * const argv[])
-{
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
-
- puts("Entering RCM...\n");
- udelay(50000);
-
- pmc->pmc_scratch0 = 2;
- disable_interrupts();
- reset_cpu(0);
-
- return 0;
-}
-
-U_BOOT_CMD(
- enterrcm, 1, 0, do_enterrcm,
- "reset Tegra and enter USB Recovery Mode",
- ""
-);
+++ /dev/null
-#
-# (C) Copyright 2010,2011
-# NVIDIA Corporation <www.nvidia.com>
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build these
-# files with compatible flags
-ifdef CONFIG_TEGRA2
-CFLAGS_arch/arm/lib/board.o += -march=armv4t
-CFLAGS_arch/arm/lib/memset.o += -march=armv4t
-CFLAGS_lib/string.o += -march=armv4t
-CFLAGS_common/cmd_nvedit.o += -march=armv4t
-endif
-
-USE_PRIVATE_LIBGCC = yes
-
-CONFIG_ARCH_DEVICE_TREE := tegra20
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/errno.h>
-#include "crypto.h"
-#include "aes.h"
-
-static u8 zero_key[16];
-
-#define AES_CMAC_CONST_RB 0x87 /* from RFC 4493, Figure 2.2 */
-
-enum security_op {
- SECURITY_SIGN = 1 << 0, /* Sign the data */
- SECURITY_ENCRYPT = 1 << 1, /* Encrypt the data */
-};
-
-static void debug_print_vector(char *name, u32 num_bytes, u8 *data)
-{
- u32 i;
-
- debug("%s [%d] @0x%08x", name, num_bytes, (u32)data);
- for (i = 0; i < num_bytes; i++) {
- if (i % 16 == 0)
- debug(" = ");
- debug("%02x", data[i]);
- if ((i+1) % 16 != 0)
- debug(" ");
- }
- debug("\n");
-}
-
-/**
- * Apply chain data to the destination using EOR
- *
- * Each array is of length AES_AES_KEY_LENGTH.
- *
- * \param cbc_chain_data Chain data
- * \param src Source data
- * \param dst Destination data, which is modified here
- */
-static void apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst)
-{
- int i;
-
- for (i = 0; i < 16; i++)
- *dst++ = *src++ ^ *cbc_chain_data++;
-}
-
-/**
- * Encrypt some data with AES.
- *
- * \param key_schedule Expanded key to use
- * \param src Source data to encrypt
- * \param dst Destination buffer
- * \param num_aes_blocks Number of AES blocks to encrypt
- */
-static void encrypt_object(u8 *key_schedule, u8 *src, u8 *dst,
- u32 num_aes_blocks)
-{
- u8 tmp_data[AES_KEY_LENGTH];
- u8 *cbc_chain_data;
- u32 i;
-
- cbc_chain_data = zero_key; /* Convenient array of 0's for IV */
-
- for (i = 0; i < num_aes_blocks; i++) {
- debug("encrypt_object: block %d of %d\n", i, num_aes_blocks);
- debug_print_vector("AES Src", AES_KEY_LENGTH, src);
-
- /* Apply the chain data */
- apply_cbc_chain_data(cbc_chain_data, src, tmp_data);
- debug_print_vector("AES Xor", AES_KEY_LENGTH, tmp_data);
-
- /* encrypt the AES block */
- aes_encrypt(tmp_data, key_schedule, dst);
- debug_print_vector("AES Dst", AES_KEY_LENGTH, dst);
-
- /* Update pointers for next loop. */
- cbc_chain_data = dst;
- src += AES_KEY_LENGTH;
- dst += AES_KEY_LENGTH;
- }
-}
-
-/**
- * Shift a vector left by one bit
- *
- * \param in Input vector
- * \param out Output vector
- * \param size Length of vector in bytes
- */
-static void left_shift_vector(u8 *in, u8 *out, int size)
-{
- int carry = 0;
- int i;
-
- for (i = size - 1; i >= 0; i--) {
- out[i] = (in[i] << 1) | carry;
- carry = in[i] >> 7; /* get most significant bit */
- }
-}
-
-/**
- * Sign a block of data, putting the result into dst.
- *
- * \param key Input AES key, length AES_KEY_LENGTH
- * \param key_schedule Expanded key to use
- * \param src Source data of length 'num_aes_blocks' blocks
- * \param dst Destination buffer, length AES_KEY_LENGTH
- * \param num_aes_blocks Number of AES blocks to encrypt
- */
-static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst,
- u32 num_aes_blocks)
-{
- u8 tmp_data[AES_KEY_LENGTH];
- u8 left[AES_KEY_LENGTH];
- u8 k1[AES_KEY_LENGTH];
- u8 *cbc_chain_data;
- unsigned i;
-
- cbc_chain_data = zero_key; /* Convenient array of 0's for IV */
-
- /* compute K1 constant needed by AES-CMAC calculation */
- for (i = 0; i < AES_KEY_LENGTH; i++)
- tmp_data[i] = 0;
-
- encrypt_object(key_schedule, tmp_data, left, 1);
- debug_print_vector("AES(key, nonce)", AES_KEY_LENGTH, left);
-
- left_shift_vector(left, k1, sizeof(left));
- debug_print_vector("L", AES_KEY_LENGTH, left);
-
- if ((left[0] >> 7) != 0) /* get MSB of L */
- k1[AES_KEY_LENGTH-1] ^= AES_CMAC_CONST_RB;
- debug_print_vector("K1", AES_KEY_LENGTH, k1);
-
- /* compute the AES-CMAC value */
- for (i = 0; i < num_aes_blocks; i++) {
- /* Apply the chain data */
- apply_cbc_chain_data(cbc_chain_data, src, tmp_data);
-
- /* for the final block, XOR K1 into the IV */
- if (i == num_aes_blocks - 1)
- apply_cbc_chain_data(tmp_data, k1, tmp_data);
-
- /* encrypt the AES block */
- aes_encrypt(tmp_data, key_schedule, dst);
-
- debug("sign_obj: block %d of %d\n", i, num_aes_blocks);
- debug_print_vector("AES-CMAC Src", AES_KEY_LENGTH, src);
- debug_print_vector("AES-CMAC Xor", AES_KEY_LENGTH, tmp_data);
- debug_print_vector("AES-CMAC Dst", AES_KEY_LENGTH, dst);
-
- /* Update pointers for next loop. */
- cbc_chain_data = dst;
- src += AES_KEY_LENGTH;
- }
-
- debug_print_vector("AES-CMAC Hash", AES_KEY_LENGTH, dst);
-}
-
-/**
- * Encrypt and sign a block of data (depending on security mode).
- *
- * \param key Input AES key, length AES_KEY_LENGTH
- * \param oper Security operations mask to perform (enum security_op)
- * \param src Source data
- * \param length Size of source data
- * \param sig_dst Destination address for signature, AES_KEY_LENGTH bytes
- */
-static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src,
- u32 length, u8 *sig_dst)
-{
- u32 num_aes_blocks;
- u8 key_schedule[AES_EXPAND_KEY_LENGTH];
-
- debug("encrypt_and_sign: length = %d\n", length);
- debug_print_vector("AES key", AES_KEY_LENGTH, key);
-
- /*
- * The only need for a key is for signing/checksum purposes, so
- * if not encrypting, expand a key of 0s.
- */
- aes_expand_key(oper & SECURITY_ENCRYPT ? key : zero_key, key_schedule);
-
- num_aes_blocks = (length + AES_KEY_LENGTH - 1) / AES_KEY_LENGTH;
-
- if (oper & SECURITY_ENCRYPT) {
- /* Perform this in place, resulting in src being encrypted. */
- debug("encrypt_and_sign: begin encryption\n");
- encrypt_object(key_schedule, src, src, num_aes_blocks);
- debug("encrypt_and_sign: end encryption\n");
- }
-
- if (oper & SECURITY_SIGN) {
- /* encrypt the data, overwriting the result in signature. */
- debug("encrypt_and_sign: begin signing\n");
- sign_object(key, key_schedule, src, sig_dst, num_aes_blocks);
- debug("encrypt_and_sign: end signing\n");
- }
-
- return 0;
-}
-
-int sign_data_block(u8 *source, unsigned length, u8 *signature)
-{
- return encrypt_and_sign(zero_key, SECURITY_SIGN, source,
- length, signature);
-}
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _CRYPTO_H_
-#define _CRYPTO_H_
-
-/**
- * Sign a block of data
- *
- * \param source Source data
- * \param length Size of source data
- * \param signature Destination address for signature, AES_KEY_LENGTH bytes
- */
-int sign_data_block(u8 *source, unsigned length, u8 *signature);
-
-#endif /* #ifndef _CRYPTO_H_ */
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <fdtdec.h>
-#include <asm/io.h>
-#include <asm/arch/ap20.h>
-#include <asm/arch/apb_misc.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/emc.h>
-#include <asm/arch/tegra2.h>
-
-/*
- * The EMC registers have shadow registers. When the EMC clock is updated
- * in the clock controller, the shadow registers are copied to the active
- * registers, allowing glitchless memory bus frequency changes.
- * This function updates the shadow registers for a new clock frequency,
- * and relies on the clock lock on the emc clock to avoid races between
- * multiple frequency changes
- */
-
-/*
- * This table defines the ordering of the registers provided to
- * tegra_set_mmc()
- * TODO: Convert to fdt version once available
- */
-static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
- 0x2c, /* RC */
- 0x30, /* RFC */
- 0x34, /* RAS */
- 0x38, /* RP */
- 0x3c, /* R2W */
- 0x40, /* W2R */
- 0x44, /* R2P */
- 0x48, /* W2P */
- 0x4c, /* RD_RCD */
- 0x50, /* WR_RCD */
- 0x54, /* RRD */
- 0x58, /* REXT */
- 0x5c, /* WDV */
- 0x60, /* QUSE */
- 0x64, /* QRST */
- 0x68, /* QSAFE */
- 0x6c, /* RDV */
- 0x70, /* REFRESH */
- 0x74, /* BURST_REFRESH_NUM */
- 0x78, /* PDEX2WR */
- 0x7c, /* PDEX2RD */
- 0x80, /* PCHG2PDEN */
- 0x84, /* ACT2PDEN */
- 0x88, /* AR2PDEN */
- 0x8c, /* RW2PDEN */
- 0x90, /* TXSR */
- 0x94, /* TCKE */
- 0x98, /* TFAW */
- 0x9c, /* TRPAB */
- 0xa0, /* TCLKSTABLE */
- 0xa4, /* TCLKSTOP */
- 0xa8, /* TREFBW */
- 0xac, /* QUSE_EXTRA */
- 0x114, /* FBIO_CFG6 */
- 0xb0, /* ODT_WRITE */
- 0xb4, /* ODT_READ */
- 0x104, /* FBIO_CFG5 */
- 0x2bc, /* CFG_DIG_DLL */
- 0x2c0, /* DLL_XFORM_DQS */
- 0x2c4, /* DLL_XFORM_QUSE */
- 0x2e0, /* ZCAL_REF_CNT */
- 0x2e4, /* ZCAL_WAIT_CNT */
- 0x2a8, /* AUTO_CAL_INTERVAL */
- 0x2d0, /* CFG_CLKTRIM_0 */
- 0x2d4, /* CFG_CLKTRIM_1 */
- 0x2d8, /* CFG_CLKTRIM_2 */
-};
-
-struct emc_ctlr *emc_get_controller(const void *blob)
-{
- fdt_addr_t addr;
- int node;
-
- node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
- if (node > 0) {
- addr = fdtdec_get_addr(blob, node, "reg");
- if (addr != FDT_ADDR_T_NONE)
- return (struct emc_ctlr *)addr;
- }
- return NULL;
-}
-
-/* Error codes we use */
-enum {
- ERR_NO_EMC_NODE = -10,
- ERR_NO_EMC_REG,
- ERR_NO_FREQ,
- ERR_FREQ_NOT_FOUND,
- ERR_BAD_REGS,
- ERR_NO_RAM_CODE,
- ERR_RAM_CODE_NOT_FOUND,
-};
-
-/**
- * Find EMC tables for the given ram code.
- *
- * The tegra EMC binding has two options, one using the ram code and one not.
- * We detect which is in use by looking for the nvidia,use-ram-code property.
- * If this is not present, then the EMC tables are directly below 'node',
- * otherwise we select the correct emc-tables subnode based on the 'ram_code'
- * value.
- *
- * @param blob Device tree blob
- * @param node EMC node (nvidia,tegra20-emc compatible string)
- * @param ram_code RAM code to select (0-3, or -1 if unknown)
- * @return 0 if ok, otherwise a -ve ERR_ code (see enum above)
- */
-static int find_emc_tables(const void *blob, int node, int ram_code)
-{
- int need_ram_code;
- int depth;
- int offset;
-
- /* If we are using RAM codes, scan through the tables for our code */
- need_ram_code = fdtdec_get_bool(blob, node, "nvidia,use-ram-code");
- if (!need_ram_code)
- return node;
- if (ram_code == -1) {
- debug("%s: RAM code required but not supplied\n", __func__);
- return ERR_NO_RAM_CODE;
- }
-
- offset = node;
- depth = 0;
- do {
- /*
- * Sadly there is no compatible string so we cannot use
- * fdtdec_next_compatible_subnode().
- */
- offset = fdt_next_node(blob, offset, &depth);
- if (depth <= 0)
- break;
-
- /* Make sure this is a direct subnode */
- if (depth != 1)
- continue;
- if (strcmp("emc-tables", fdt_get_name(blob, offset, NULL)))
- continue;
-
- if (fdtdec_get_int(blob, offset, "nvidia,ram-code", -1)
- == ram_code)
- return offset;
- } while (1);
-
- debug("%s: Could not find tables for RAM code %d\n", __func__,
- ram_code);
- return ERR_RAM_CODE_NOT_FOUND;
-}
-
-/**
- * Decode the EMC node of the device tree, returning a pointer to the emc
- * controller and the table to be used for the given rate.
- *
- * @param blob Device tree blob
- * @param rate Clock speed of memory controller in Hz (=2x memory bus rate)
- * @param emcp Returns address of EMC controller registers
- * @param tablep Returns pointer to table to program into EMC. There are
- * TEGRA_EMC_NUM_REGS entries, destined for offsets as per the
- * emc_reg_addr array.
- * @return 0 if ok, otherwise a -ve error code which will allow someone to
- * figure out roughly what went wrong by looking at this code.
- */
-static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp,
- const u32 **tablep)
-{
- struct apb_misc_pp_ctlr *pp =
- (struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
- int ram_code;
- int depth;
- int node;
-
- ram_code = (readl(&pp->strapping_opt_a) & RAM_CODE_MASK)
- >> RAM_CODE_SHIFT;
- /*
- * The EMC clock rate is twice the bus rate, and the bus rate is
- * measured in kHz
- */
- rate = rate / 2 / 1000;
-
- node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
- if (node < 0) {
- debug("%s: No EMC node found in FDT\n", __func__);
- return ERR_NO_EMC_NODE;
- }
- *emcp = (struct emc_ctlr *)fdtdec_get_addr(blob, node, "reg");
- if (*emcp == (struct emc_ctlr *)FDT_ADDR_T_NONE) {
- debug("%s: No EMC node reg property\n", __func__);
- return ERR_NO_EMC_REG;
- }
-
- /* Work out the parent node which contains our EMC tables */
- node = find_emc_tables(blob, node, ram_code & 3);
- if (node < 0)
- return node;
-
- depth = 0;
- for (;;) {
- int node_rate;
-
- node = fdtdec_next_compatible_subnode(blob, node,
- COMPAT_NVIDIA_TEGRA20_EMC_TABLE, &depth);
- if (node < 0)
- break;
- node_rate = fdtdec_get_int(blob, node, "clock-frequency", -1);
- if (node_rate == -1) {
- debug("%s: Missing clock-frequency\n", __func__);
- return ERR_NO_FREQ; /* we expect this property */
- }
-
- if (node_rate == rate)
- break;
- }
- if (node < 0) {
- debug("%s: No node found for clock frequency %d\n", __func__,
- rate);
- return ERR_FREQ_NOT_FOUND;
- }
-
- *tablep = fdtdec_locate_array(blob, node, "nvidia,emc-registers",
- TEGRA_EMC_NUM_REGS);
- if (!*tablep) {
- debug("%s: node '%s' array missing / wrong size\n", __func__,
- fdt_get_name(blob, node, NULL));
- return ERR_BAD_REGS;
- }
-
- /* All seems well */
- return 0;
-}
-
-int tegra_set_emc(const void *blob, unsigned rate)
-{
- struct emc_ctlr *emc;
- const u32 *table;
- int err, i;
-
- err = decode_emc(blob, rate, &emc, &table);
- if (err) {
- debug("Warning: no valid EMC (%d), memory timings unset\n",
- err);
- return err;
- }
-
- debug("%s: Table found, setting EMC values as follows:\n", __func__);
- for (i = 0; i < TEGRA_EMC_NUM_REGS; i++) {
- u32 value = fdt32_to_cpu(table[i]);
- u32 addr = (uintptr_t)emc + emc_reg_addr[i];
-
- debug(" %#x: %#x\n", addr, value);
- writel(value, addr);
- }
-
- /* trigger emc with new settings */
- clock_adjust_periph_pll_div(PERIPH_ID_EMC, CLOCK_ID_MEMORY,
- clock_get_rate(CLOCK_ID_MEMORY), NULL);
- debug("EMC clock set to %lu\n",
- clock_get_periph_rate(PERIPH_ID_EMC, CLOCK_ID_MEMORY));
-
- return 0;
-}
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Tegra2 high-level function multiplexing */
-#include <common.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/funcmux.h>
-#include <asm/arch/pinmux.h>
-
-int funcmux_select(enum periph_id id, int config)
-{
- int bad_config = config != FUNCMUX_DEFAULT;
-
- switch (id) {
- case PERIPH_ID_UART1:
- switch (config) {
- case FUNCMUX_UART1_IRRX_IRTX:
- pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
- pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
- pinmux_tristate_disable(PINGRP_IRRX);
- pinmux_tristate_disable(PINGRP_IRTX);
- break;
- case FUNCMUX_UART1_UAA_UAB:
- pinmux_set_func(PINGRP_UAA, PMUX_FUNC_UARTA);
- pinmux_set_func(PINGRP_UAB, PMUX_FUNC_UARTA);
- pinmux_tristate_disable(PINGRP_UAA);
- pinmux_tristate_disable(PINGRP_UAB);
- bad_config = 0;
- break;
- case FUNCMUX_UART1_GPU:
- pinmux_set_func(PINGRP_GPU, PMUX_FUNC_UARTA);
- pinmux_tristate_disable(PINGRP_GPU);
- bad_config = 0;
- break;
- case FUNCMUX_UART1_SDIO1:
- pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_UARTA);
- pinmux_tristate_disable(PINGRP_SDIO1);
- bad_config = 0;
- break;
- }
- if (!bad_config) {
- /*
- * Tegra appears to boot with function UARTA pre-
- * selected on mux group SDB. If two mux groups are
- * both set to the same function, it's unclear which
- * group's pins drive the RX signals into the HW.
- * For UARTA, SDB certainly overrides group IRTX in
- * practice. To solve this, configure some alternative
- * function on SDB to avoid the conflict. Also, tri-
- * state the group to avoid driving any signal onto it
- * until we know what's connected.
- */
- pinmux_tristate_enable(PINGRP_SDB);
- pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
- }
- break;
-
- case PERIPH_ID_UART2:
- if (config == FUNCMUX_UART2_IRDA) {
- pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
- pinmux_tristate_disable(PINGRP_UAD);
- }
- break;
-
- case PERIPH_ID_UART4:
- if (config == FUNCMUX_UART4_GMC) {
- pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
- pinmux_tristate_disable(PINGRP_GMC);
- }
- break;
-
- case PERIPH_ID_DVC_I2C:
- /* there is only one selection, pinmux_config is ignored */
- if (config == FUNCMUX_DVC_I2CP) {
- pinmux_set_func(PINGRP_I2CP, PMUX_FUNC_I2C);
- pinmux_tristate_disable(PINGRP_I2CP);
- }
- break;
-
- case PERIPH_ID_I2C1:
- /* support pinmux_config of 0 for now, */
- if (config == FUNCMUX_I2C1_RM) {
- pinmux_set_func(PINGRP_RM, PMUX_FUNC_I2C);
- pinmux_tristate_disable(PINGRP_RM);
- }
- break;
- case PERIPH_ID_I2C2: /* I2C2 */
- switch (config) {
- case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */
- pinmux_set_func(PINGRP_DDC, PMUX_FUNC_I2C2);
- /* PTA to HDMI */
- pinmux_set_func(PINGRP_PTA, PMUX_FUNC_HDMI);
- pinmux_tristate_disable(PINGRP_DDC);
- break;
- case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */
- pinmux_set_func(PINGRP_PTA, PMUX_FUNC_I2C2);
- /* set DDC_SEL to RSVDx (RSVD2 works for now) */
- pinmux_set_func(PINGRP_DDC, PMUX_FUNC_RSVD2);
- pinmux_tristate_disable(PINGRP_PTA);
- bad_config = 0;
- break;
- }
- break;
- case PERIPH_ID_I2C3: /* I2C3 */
- /* support pinmux_config of 0 for now */
- if (config == FUNCMUX_I2C3_DTF) {
- pinmux_set_func(PINGRP_DTF, PMUX_FUNC_I2C3);
- pinmux_tristate_disable(PINGRP_DTF);
- }
- break;
-
- case PERIPH_ID_SDMMC1:
- if (config == FUNCMUX_SDMMC1_SDIO1_4BIT) {
- pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_SDIO1);
- pinmux_tristate_disable(PINGRP_SDIO1);
- }
- break;
-
- case PERIPH_ID_SDMMC2:
- if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) {
- pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
- pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2);
-
- pinmux_tristate_disable(PINGRP_DTA);
- pinmux_tristate_disable(PINGRP_DTD);
- }
- break;
-
- case PERIPH_ID_SDMMC3:
- switch (config) {
- case FUNCMUX_SDMMC3_SDB_SLXA_8BIT:
- pinmux_set_func(PINGRP_SLXA, PMUX_FUNC_SDIO3);
- pinmux_set_func(PINGRP_SLXC, PMUX_FUNC_SDIO3);
- pinmux_set_func(PINGRP_SLXD, PMUX_FUNC_SDIO3);
- pinmux_set_func(PINGRP_SLXK, PMUX_FUNC_SDIO3);
-
- pinmux_tristate_disable(PINGRP_SLXA);
- pinmux_tristate_disable(PINGRP_SLXC);
- pinmux_tristate_disable(PINGRP_SLXD);
- pinmux_tristate_disable(PINGRP_SLXK);
- /* fall through */
-
- case FUNCMUX_SDMMC3_SDB_4BIT:
- pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
- pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
- pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
-
- pinmux_tristate_disable(PINGRP_SDB);
- pinmux_tristate_disable(PINGRP_SDC);
- pinmux_tristate_disable(PINGRP_SDD);
- bad_config = 0;
- break;
- }
- break;
-
- case PERIPH_ID_SDMMC4:
- switch (config) {
- case FUNCMUX_SDMMC4_ATC_ATD_8BIT:
- pinmux_set_func(PINGRP_ATC, PMUX_FUNC_SDIO4);
- pinmux_set_func(PINGRP_ATD, PMUX_FUNC_SDIO4);
-
- pinmux_tristate_disable(PINGRP_ATC);
- pinmux_tristate_disable(PINGRP_ATD);
- break;
-
- case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT:
- pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
- pinmux_tristate_disable(PINGRP_GME);
- /* fall through */
-
- case FUNCMUX_SDMMC4_ATB_GMA_4_BIT:
- pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
- pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
-
- pinmux_tristate_disable(PINGRP_ATB);
- pinmux_tristate_disable(PINGRP_GMA);
- bad_config = 0;
- break;
- }
- break;
-
- case PERIPH_ID_KBC:
- if (config == FUNCMUX_DEFAULT) {
- enum pmux_pingrp grp[] = {PINGRP_KBCA, PINGRP_KBCB,
- PINGRP_KBCC, PINGRP_KBCD, PINGRP_KBCE,
- PINGRP_KBCF};
- int i;
-
- for (i = 0; i < ARRAY_SIZE(grp); i++) {
- pinmux_tristate_disable(grp[i]);
- pinmux_set_func(grp[i], PMUX_FUNC_KBC);
- pinmux_set_pullupdown(grp[i], PMUX_PULL_UP);
- }
- }
- break;
-
- case PERIPH_ID_USB2:
- if (config == FUNCMUX_USB2_ULPI) {
- pinmux_set_func(PINGRP_UAA, PMUX_FUNC_ULPI);
- pinmux_set_func(PINGRP_UAB, PMUX_FUNC_ULPI);
- pinmux_set_func(PINGRP_UDA, PMUX_FUNC_ULPI);
-
- pinmux_tristate_disable(PINGRP_UAA);
- pinmux_tristate_disable(PINGRP_UAB);
- pinmux_tristate_disable(PINGRP_UDA);
- }
- break;
-
- case PERIPH_ID_SPI1:
- if (config == FUNCMUX_SPI1_GMC_GMD) {
- pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
- pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
-
- pinmux_tristate_disable(PINGRP_GMC);
- pinmux_tristate_disable(PINGRP_GMD);
- }
- break;
-
- default:
- debug("%s: invalid periph_id %d", __func__, id);
- return -1;
- }
-
- if (bad_config) {
- debug("%s: invalid config %d for periph_id %d", __func__,
- config, id);
- return -1;
- }
-
- return 0;
-}
+++ /dev/null
-/*
- * SoC-specific setup info
- *
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <linux/linkage.h>
-
- .align 5
-ENTRY(reset_cpu)
- ldr r1, rstctl @ get addr for global reset
- @ reg
- ldr r3, [r1]
- orr r3, r3, #0x10
- str r3, [r1] @ force reset
- mov r0, r0
-_loop_forever:
- b _loop_forever
-rstctl:
- .word PRM_RSTCTRL
-ENDPROC(reset_cpu)
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Tegra2 pin multiplexing functions */
-
-#include <asm/io.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/pinmux.h>
-#include <common.h>
-
-
-/*
- * This defines the order of the pin mux control bits in the registers. For
- * some reason there is no correspendence between the tristate, pin mux and
- * pullup/pulldown registers.
- */
-enum pmux_ctlid {
- /* 0: APB_MISC_PP_PIN_MUX_CTL_A_0 */
- MUXCTL_UAA,
- MUXCTL_UAB,
- MUXCTL_UAC,
- MUXCTL_UAD,
- MUXCTL_UDA,
- MUXCTL_RESERVED5,
- MUXCTL_ATE,
- MUXCTL_RM,
-
- MUXCTL_ATB,
- MUXCTL_RESERVED9,
- MUXCTL_ATD,
- MUXCTL_ATC,
- MUXCTL_ATA,
- MUXCTL_KBCF,
- MUXCTL_KBCE,
- MUXCTL_SDMMC1,
-
- /* 16: APB_MISC_PP_PIN_MUX_CTL_B_0 */
- MUXCTL_GMA,
- MUXCTL_GMC,
- MUXCTL_HDINT,
- MUXCTL_SLXA,
- MUXCTL_OWC,
- MUXCTL_SLXC,
- MUXCTL_SLXD,
- MUXCTL_SLXK,
-
- MUXCTL_UCA,
- MUXCTL_UCB,
- MUXCTL_DTA,
- MUXCTL_DTB,
- MUXCTL_RESERVED28,
- MUXCTL_DTC,
- MUXCTL_DTD,
- MUXCTL_DTE,
-
- /* 32: APB_MISC_PP_PIN_MUX_CTL_C_0 */
- MUXCTL_DDC,
- MUXCTL_CDEV1,
- MUXCTL_CDEV2,
- MUXCTL_CSUS,
- MUXCTL_I2CP,
- MUXCTL_KBCA,
- MUXCTL_KBCB,
- MUXCTL_KBCC,
-
- MUXCTL_IRTX,
- MUXCTL_IRRX,
- MUXCTL_DAP1,
- MUXCTL_DAP2,
- MUXCTL_DAP3,
- MUXCTL_DAP4,
- MUXCTL_GMB,
- MUXCTL_GMD,
-
- /* 48: APB_MISC_PP_PIN_MUX_CTL_D_0 */
- MUXCTL_GME,
- MUXCTL_GPV,
- MUXCTL_GPU,
- MUXCTL_SPDO,
- MUXCTL_SPDI,
- MUXCTL_SDB,
- MUXCTL_SDC,
- MUXCTL_SDD,
-
- MUXCTL_SPIH,
- MUXCTL_SPIG,
- MUXCTL_SPIF,
- MUXCTL_SPIE,
- MUXCTL_SPID,
- MUXCTL_SPIC,
- MUXCTL_SPIB,
- MUXCTL_SPIA,
-
- /* 64: APB_MISC_PP_PIN_MUX_CTL_E_0 */
- MUXCTL_LPW0,
- MUXCTL_LPW1,
- MUXCTL_LPW2,
- MUXCTL_LSDI,
- MUXCTL_LSDA,
- MUXCTL_LSPI,
- MUXCTL_LCSN,
- MUXCTL_LDC,
-
- MUXCTL_LSCK,
- MUXCTL_LSC0,
- MUXCTL_LSC1,
- MUXCTL_LHS,
- MUXCTL_LVS,
- MUXCTL_LM0,
- MUXCTL_LM1,
- MUXCTL_LVP0,
-
- /* 80: APB_MISC_PP_PIN_MUX_CTL_F_0 */
- MUXCTL_LD0,
- MUXCTL_LD1,
- MUXCTL_LD2,
- MUXCTL_LD3,
- MUXCTL_LD4,
- MUXCTL_LD5,
- MUXCTL_LD6,
- MUXCTL_LD7,
-
- MUXCTL_LD8,
- MUXCTL_LD9,
- MUXCTL_LD10,
- MUXCTL_LD11,
- MUXCTL_LD12,
- MUXCTL_LD13,
- MUXCTL_LD14,
- MUXCTL_LD15,
-
- /* 96: APB_MISC_PP_PIN_MUX_CTL_G_0 */
- MUXCTL_LD16,
- MUXCTL_LD17,
- MUXCTL_LHP1,
- MUXCTL_LHP2,
- MUXCTL_LVP1,
- MUXCTL_LHP0,
- MUXCTL_RESERVED102,
- MUXCTL_LPP,
-
- MUXCTL_LDI,
- MUXCTL_PMC,
- MUXCTL_CRTP,
- MUXCTL_PTA,
- MUXCTL_RESERVED108,
- MUXCTL_KBCD,
- MUXCTL_GPU7,
- MUXCTL_DTF,
-
- MUXCTL_NONE = -1,
-};
-
-/*
- * And this defines the order of the pullup/pulldown controls which are again
- * in a different order
- */
-enum pmux_pullid {
- /* 0: APB_MISC_PP_PULLUPDOWN_REG_A_0 */
- PUCTL_ATA,
- PUCTL_ATB,
- PUCTL_ATC,
- PUCTL_ATD,
- PUCTL_ATE,
- PUCTL_DAP1,
- PUCTL_DAP2,
- PUCTL_DAP3,
-
- PUCTL_DAP4,
- PUCTL_DTA,
- PUCTL_DTB,
- PUCTL_DTC,
- PUCTL_DTD,
- PUCTL_DTE,
- PUCTL_DTF,
- PUCTL_GPV,
-
- /* 16: APB_MISC_PP_PULLUPDOWN_REG_B_0 */
- PUCTL_RM,
- PUCTL_I2CP,
- PUCTL_PTA,
- PUCTL_GPU7,
- PUCTL_KBCA,
- PUCTL_KBCB,
- PUCTL_KBCC,
- PUCTL_KBCD,
-
- PUCTL_SPDI,
- PUCTL_SPDO,
- PUCTL_GPSLXAU,
- PUCTL_CRTP,
- PUCTL_SLXC,
- PUCTL_SLXD,
- PUCTL_SLXK,
-
- /* 32: APB_MISC_PP_PULLUPDOWN_REG_C_0 */
- PUCTL_CDEV1,
- PUCTL_CDEV2,
- PUCTL_SPIA,
- PUCTL_SPIB,
- PUCTL_SPIC,
- PUCTL_SPID,
- PUCTL_SPIE,
- PUCTL_SPIF,
-
- PUCTL_SPIG,
- PUCTL_SPIH,
- PUCTL_IRTX,
- PUCTL_IRRX,
- PUCTL_GME,
- PUCTL_RESERVED45,
- PUCTL_XM2D,
- PUCTL_XM2C,
-
- /* 48: APB_MISC_PP_PULLUPDOWN_REG_D_0 */
- PUCTL_UAA,
- PUCTL_UAB,
- PUCTL_UAC,
- PUCTL_UAD,
- PUCTL_UCA,
- PUCTL_UCB,
- PUCTL_LD17,
- PUCTL_LD19_18,
-
- PUCTL_LD21_20,
- PUCTL_LD23_22,
- PUCTL_LS,
- PUCTL_LC,
- PUCTL_CSUS,
- PUCTL_DDRC,
- PUCTL_SDC,
- PUCTL_SDD,
-
- /* 64: APB_MISC_PP_PULLUPDOWN_REG_E_0 */
- PUCTL_KBCF,
- PUCTL_KBCE,
- PUCTL_PMCA,
- PUCTL_PMCB,
- PUCTL_PMCC,
- PUCTL_PMCD,
- PUCTL_PMCE,
- PUCTL_CK32,
-
- PUCTL_UDA,
- PUCTL_SDMMC1,
- PUCTL_GMA,
- PUCTL_GMB,
- PUCTL_GMC,
- PUCTL_GMD,
- PUCTL_DDC,
- PUCTL_OWC,
-
- PUCTL_NONE = -1
-};
-
-struct tegra_pingroup_desc {
- const char *name;
- enum pmux_func funcs[4];
- enum pmux_func func_safe;
- enum pmux_vddio vddio;
- enum pmux_ctlid ctl_id;
- enum pmux_pullid pull_id;
-};
-
-
-/* Converts a pmux_pingrp number to a tristate register: 0=A, 1=B, 2=C, 3=D */
-#define TRISTATE_REG(pmux_pingrp) ((pmux_pingrp) >> 5)
-
-/* Mask value for a tristate (within TRISTATE_REG(id)) */
-#define TRISTATE_MASK(pmux_pingrp) (1 << ((pmux_pingrp) & 0x1f))
-
-/* Converts a PUCTL id to a pull register: 0=A, 1=B...4=E */
-#define PULL_REG(pmux_pullid) ((pmux_pullid) >> 4)
-
-/* Converts a PUCTL id to a shift position */
-#define PULL_SHIFT(pmux_pullid) ((pmux_pullid << 1) & 0x1f)
-
-/* Converts a MUXCTL id to a ctl register: 0=A, 1=B...6=G */
-#define MUXCTL_REG(pmux_ctlid) ((pmux_ctlid) >> 4)
-
-/* Converts a MUXCTL id to a shift position */
-#define MUXCTL_SHIFT(pmux_ctlid) ((pmux_ctlid << 1) & 0x1f)
-
-/* Convenient macro for defining pin group properties */
-#define PINALL(pg_name, vdd, f0, f1, f2, f3, f_safe, mux, pupd) \
- { \
- .vddio = PMUX_VDDIO_ ## vdd, \
- .funcs = { \
- PMUX_FUNC_ ## f0, \
- PMUX_FUNC_ ## f1, \
- PMUX_FUNC_ ## f2, \
- PMUX_FUNC_ ## f3, \
- }, \
- .func_safe = PMUX_FUNC_ ## f_safe, \
- .ctl_id = mux, \
- .pull_id = pupd \
- }
-
-/* A normal pin group where the mux name and pull-up name match */
-#define PIN(pg_name, vdd, f0, f1, f2, f3, f_safe) \
- PINALL(pg_name, vdd, f0, f1, f2, f3, f_safe, \
- MUXCTL_ ## pg_name, PUCTL_ ## pg_name)
-
-/* A pin group where the pull-up name doesn't have a 1-1 mapping */
-#define PINP(pg_name, vdd, f0, f1, f2, f3, f_safe, pupd) \
- PINALL(pg_name, vdd, f0, f1, f2, f3, f_safe, \
- MUXCTL_ ## pg_name, PUCTL_ ## pupd)
-
-/* A pin group number which is not used */
-#define PIN_RESERVED \
- PIN(NONE, NONE, NONE, NONE, NONE, NONE, NONE)
-
-const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
- PIN(ATA, NAND, IDE, NAND, GMI, RSVD, IDE),
- PIN(ATB, NAND, IDE, NAND, GMI, SDIO4, IDE),
- PIN(ATC, NAND, IDE, NAND, GMI, SDIO4, IDE),
- PIN(ATD, NAND, IDE, NAND, GMI, SDIO4, IDE),
- PIN(CDEV1, AUDIO, OSC, PLLA_OUT, PLLM_OUT1, AUDIO_SYNC, OSC),
- PIN(CDEV2, AUDIO, OSC, AHB_CLK, APB_CLK, PLLP_OUT4, OSC),
- PIN(CSUS, VI, PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK,
- PLLC_OUT1),
- PIN(DAP1, AUDIO, DAP1, RSVD, GMI, SDIO2, DAP1),
-
- PIN(DAP2, AUDIO, DAP2, TWC, RSVD, GMI, DAP2),
- PIN(DAP3, BB, DAP3, RSVD, RSVD, RSVD, DAP3),
- PIN(DAP4, UART, DAP4, RSVD, GMI, RSVD, DAP4),
- PIN(DTA, VI, RSVD, SDIO2, VI, RSVD, RSVD4),
- PIN(DTB, VI, RSVD, RSVD, VI, SPI1, RSVD1),
- PIN(DTC, VI, RSVD, RSVD, VI, RSVD, RSVD1),
- PIN(DTD, VI, RSVD, SDIO2, VI, RSVD, RSVD1),
- PIN(DTE, VI, RSVD, RSVD, VI, SPI1, RSVD1),
-
- PINP(GPU, UART, PWM, UARTA, GMI, RSVD, RSVD4,
- GPSLXAU),
- PIN(GPV, SD, PCIE, RSVD, RSVD, RSVD, PCIE),
- PIN(I2CP, SYS, I2C, RSVD, RSVD, RSVD, RSVD4),
- PIN(IRTX, UART, UARTA, UARTB, GMI, SPI4, UARTB),
- PIN(IRRX, UART, UARTA, UARTB, GMI, SPI4, UARTB),
- PIN(KBCB, SYS, KBC, NAND, SDIO2, MIO, KBC),
- PIN(KBCA, SYS, KBC, NAND, SDIO2, EMC_TEST0_DLL, KBC),
- PINP(PMC, SYS, PWR_ON, PWR_INTR, RSVD, RSVD, PWR_ON, NONE),
-
- PIN(PTA, NAND, I2C2, HDMI, GMI, RSVD, RSVD4),
- PIN(RM, UART, I2C, RSVD, RSVD, RSVD, RSVD4),
- PIN(KBCE, SYS, KBC, NAND, OWR, RSVD, KBC),
- PIN(KBCF, SYS, KBC, NAND, TRACE, MIO, KBC),
- PIN(GMA, NAND, UARTE, SPI3, GMI, SDIO4, SPI3),
- PIN(GMC, NAND, UARTD, SPI4, GMI, SFLASH, SPI4),
- PIN(SDMMC1, BB, SDIO1, RSVD, UARTE, UARTA, RSVD2),
- PIN(OWC, SYS, OWR, RSVD, RSVD, RSVD, OWR),
-
- PIN(GME, NAND, RSVD, DAP5, GMI, SDIO4, GMI),
- PIN(SDC, SD, PWM, TWC, SDIO3, SPI3, TWC),
- PIN(SDD, SD, UARTA, PWM, SDIO3, SPI3, PWM),
- PIN_RESERVED,
- PINP(SLXA, SD, PCIE, SPI4, SDIO3, SPI2, PCIE, CRTP),
- PIN(SLXC, SD, SPDIF, SPI4, SDIO3, SPI2, SPI4),
- PIN(SLXD, SD, SPDIF, SPI4, SDIO3, SPI2, SPI4),
- PIN(SLXK, SD, PCIE, SPI4, SDIO3, SPI2, PCIE),
-
- PIN(SPDI, AUDIO, SPDIF, RSVD, I2C, SDIO2, RSVD2),
- PIN(SPDO, AUDIO, SPDIF, RSVD, I2C, SDIO2, RSVD2),
- PIN(SPIA, AUDIO, SPI1, SPI2, SPI3, GMI, GMI),
- PIN(SPIB, AUDIO, SPI1, SPI2, SPI3, GMI, GMI),
- PIN(SPIC, AUDIO, SPI1, SPI2, SPI3, GMI, GMI),
- PIN(SPID, AUDIO, SPI2, SPI1, SPI2_ALT, GMI, GMI),
- PIN(SPIE, AUDIO, SPI2, SPI1, SPI2_ALT, GMI, GMI),
- PIN(SPIF, AUDIO, SPI3, SPI1, SPI2, RSVD, RSVD4),
-
- PIN(SPIG, AUDIO, SPI3, SPI2, SPI2_ALT, I2C, SPI2_ALT),
- PIN(SPIH, AUDIO, SPI3, SPI2, SPI2_ALT, I2C, SPI2_ALT),
- PIN(UAA, BB, SPI3, MIPI_HS, UARTA, ULPI, MIPI_HS),
- PIN(UAB, BB, SPI2, MIPI_HS, UARTA, ULPI, MIPI_HS),
- PIN(UAC, BB, OWR, RSVD, RSVD, RSVD, RSVD4),
- PIN(UAD, UART, IRDA, SPDIF, UARTA, SPI4, SPDIF),
- PIN(UCA, UART, UARTC, RSVD, GMI, RSVD, RSVD4),
- PIN(UCB, UART, UARTC, PWM, GMI, RSVD, RSVD4),
-
- PIN_RESERVED,
- PIN(ATE, NAND, IDE, NAND, GMI, RSVD, IDE),
- PIN(KBCC, SYS, KBC, NAND, TRACE, EMC_TEST1_DLL, KBC),
- PIN_RESERVED,
- PIN_RESERVED,
- PIN(GMB, NAND, IDE, NAND, GMI, GMI_INT, GMI),
- PIN(GMD, NAND, RSVD, NAND, GMI, SFLASH, GMI),
- PIN(DDC, LCD, I2C2, RSVD, RSVD, RSVD, RSVD4),
-
- /* 64 */
- PINP(LD0, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD1, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD2, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD3, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD4, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD5, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD6, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD7, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
-
- PINP(LD8, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD9, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD10, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD11, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD12, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD13, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD14, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD15, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
-
- PINP(LD16, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
- PINP(LD17, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD17),
- PINP(LHP0, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD21_20),
- PINP(LHP1, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD19_18),
- PINP(LHP2, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD19_18),
- PINP(LVP0, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LC),
- PINP(LVP1, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD21_20),
- PINP(HDINT, LCD, HDMI, RSVD, RSVD, RSVD, HDMI , LC),
-
- PINP(LM0, LCD, DISPA, DISPB, SPI3, RSVD, RSVD4, LC),
- PINP(LM1, LCD, DISPA, DISPB, RSVD, CRT, RSVD3, LC),
- PINP(LVS, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LC),
- PINP(LSC0, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LC),
- PINP(LSC1, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
- PINP(LSCK, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
- PINP(LDC, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LS),
- PINP(LCSN, LCD, DISPA, DISPB, SPI3, RSVD, RSVD4, LS),
-
- /* 96 */
- PINP(LSPI, LCD, DISPA, DISPB, XIO, HDMI, DISPA, LC),
- PINP(LSDA, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
- PINP(LSDI, LCD, DISPA, DISPB, SPI3, RSVD, DISPA, LS),
- PINP(LPW0, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
- PINP(LPW1, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LS),
- PINP(LPW2, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
- PINP(LDI, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD23_22),
- PINP(LHS, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LC),
-
- PINP(LPP, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD23_22),
- PIN_RESERVED,
- PIN(KBCD, SYS, KBC, NAND, SDIO2, MIO, KBC),
- PIN(GPU7, SYS, RTCK, RSVD, RSVD, RSVD, RTCK),
- PIN(DTF, VI, I2C3, RSVD, VI, RSVD, RSVD4),
- PIN(UDA, BB, SPI1, RSVD, UARTD, ULPI, RSVD2),
- PIN(CRTP, LCD, CRT, RSVD, RSVD, RSVD, RSVD),
- PINP(SDB, SD, UARTA, PWM, SDIO3, SPI2, PWM, NONE),
-
- /* these pin groups only have pullup and pull down control */
- PINALL(CK32, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(DDRC, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(PMCA, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(PMCB, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(PMCC, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(PMCD, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(PMCE, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(XM2C, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
- PINALL(XM2D, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
- PUCTL_NONE),
-};
-
-void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
-{
- struct pmux_tri_ctlr *pmt =
- (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
- u32 *tri = &pmt->pmt_tri[TRISTATE_REG(pin)];
- u32 reg;
-
- reg = readl(tri);
- if (enable)
- reg |= TRISTATE_MASK(pin);
- else
- reg &= ~TRISTATE_MASK(pin);
- writel(reg, tri);
-}
-
-void pinmux_tristate_enable(enum pmux_pingrp pin)
-{
- pinmux_set_tristate(pin, 1);
-}
-
-void pinmux_tristate_disable(enum pmux_pingrp pin)
-{
- pinmux_set_tristate(pin, 0);
-}
-
-void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
-{
- struct pmux_tri_ctlr *pmt =
- (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
- enum pmux_pullid pull_id = tegra_soc_pingroups[pin].pull_id;
- u32 *pull = &pmt->pmt_pull[PULL_REG(pull_id)];
- u32 mask_bit;
- u32 reg;
- mask_bit = PULL_SHIFT(pull_id);
-
- reg = readl(pull);
- reg &= ~(0x3 << mask_bit);
- reg |= pupd << mask_bit;
- writel(reg, pull);
-}
-
-void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
-{
- struct pmux_tri_ctlr *pmt =
- (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
- enum pmux_ctlid mux_id = tegra_soc_pingroups[pin].ctl_id;
- u32 *muxctl = &pmt->pmt_ctl[MUXCTL_REG(mux_id)];
- u32 mask_bit;
- int i, mux = -1;
- u32 reg;
-
- assert(pmux_func_isvalid(func));
-
- /* Handle special values */
- if (func >= PMUX_FUNC_RSVD1) {
- mux = (func - PMUX_FUNC_RSVD1) & 0x3;
- } else {
- /* Search for the appropriate function */
- for (i = 0; i < 4; i++) {
- if (tegra_soc_pingroups[pin].funcs[i] == func) {
- mux = i;
- break;
- }
- }
- }
- assert(mux != -1);
-
- mask_bit = MUXCTL_SHIFT(mux_id);
- reg = readl(muxctl);
- reg &= ~(0x3 << mask_bit);
- reg |= mux << mask_bit;
- writel(reg, muxctl);
-}
-
-void pinmux_config_pingroup(struct pingroup_config *config)
-{
- enum pmux_pingrp pin = config->pingroup;
-
- pinmux_set_func(pin, config->func);
- pinmux_set_pullupdown(pin, config->pull);
- pinmux_set_tristate(pin, config->tristate);
-}
-
-void pinmux_config_table(struct pingroup_config *config, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- pinmux_config_pingroup(&config[i]);
-}
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <tps6586x.h>
-#include <asm/io.h>
-#include <asm/arch/ap20.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/tegra_i2c.h>
-#include <asm/arch/sys_proto.h>
-
-#define VDD_CORE_NOMINAL_T25 0x17 /* 1.3v */
-#define VDD_CPU_NOMINAL_T25 0x10 /* 1.125v */
-
-#define VDD_CORE_NOMINAL_T20 0x16 /* 1.275v */
-#define VDD_CPU_NOMINAL_T20 0x0f /* 1.1v */
-
-#define VDD_RELATION 0x02 /* 50mv */
-#define VDD_TRANSITION_STEP 0x06 /* 150mv */
-#define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */
-
-int pmu_set_nominal(void)
-{
- int core, cpu, bus;
-
- /* by default, the table has been filled with T25 settings */
- switch (tegra_get_chip_type()) {
- case TEGRA_SOC_T20:
- core = VDD_CORE_NOMINAL_T20;
- cpu = VDD_CPU_NOMINAL_T20;
- break;
- case TEGRA_SOC_T25:
- core = VDD_CORE_NOMINAL_T25;
- cpu = VDD_CPU_NOMINAL_T25;
- break;
- default:
- debug("%s: Unknown chip type\n", __func__);
- return -1;
- }
-
- bus = tegra_i2c_get_dvc_bus_num();
- if (bus == -1) {
- debug("%s: Cannot find DVC I2C bus\n", __func__);
- return -1;
- }
- tps6586x_init(bus);
- tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
- return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
- VDD_TRANSITION_RATE, VDD_RELATION);
-}
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CONFIG_DISPLAY_CPUINFO
-/* Print CPU information */
-int print_cpuinfo(void)
-{
- puts("TEGRA2\n");
-
- /* TBD: Add printf of major/minor rev info, stepping, etc. */
- return 0;
-}
-#endif /* CONFIG_DISPLAY_CPUINFO */
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * (C) Copyright 2008
- * Texas Instruments
- *
- * Richard Woodruff <r-woodruff2@ti.com>
- * Syed Moahmmed Khasim <khasim@ti.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/timer.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* counter runs at 1MHz */
-#define TIMER_CLK 1000000
-#define TIMER_LOAD_VAL 0xffffffff
-
-/* timer without interrupts */
-ulong get_timer(ulong base)
-{
- return get_timer_masked() - base;
-}
-
-/* delay x useconds */
-void __udelay(unsigned long usec)
-{
- long tmo = usec * (TIMER_CLK / 1000) / 1000;
- unsigned long now, last = timer_get_us();
-
- while (tmo > 0) {
- now = timer_get_us();
- if (last > now) /* count up timer overflow */
- tmo -= TIMER_LOAD_VAL - last + now;
- else
- tmo -= now - last;
- last = now;
- }
-}
-
-ulong get_timer_masked(void)
-{
- ulong now;
-
- /* current tick value */
- now = timer_get_us() / (TIMER_CLK / CONFIG_SYS_HZ);
-
- if (now >= gd->lastinc) /* normal mode (non roll) */
- /* move stamp forward with absolute diff ticks */
- gd->tbl += (now - gd->lastinc);
- else /* we have rollover of incrementer */
- gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLK / CONFIG_SYS_HZ))
- - gd->lastinc) + now;
- gd->lastinc = now;
- return gd->tbl;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return CONFIG_SYS_HZ;
-}
-
-unsigned long timer_get_us(void)
-{
- struct timerus *timer_base = (struct timerus *)NV_PA_TMRUS_BASE;
-
- return readl(&timer_base->cntr_1us);
-}
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm-generic/gpio.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/clk_rst.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/uart.h>
-#include <asm/arch/usb.h>
-#include <libfdt.h>
-#include <fdtdec.h>
-
-enum {
- USB_PORTS_MAX = 4, /* Maximum ports we allow */
-};
-
-/* Parameters we need for USB */
-enum {
- PARAM_DIVN, /* PLL FEEDBACK DIVIDer */
- PARAM_DIVM, /* PLL INPUT DIVIDER */
- PARAM_DIVP, /* POST DIVIDER (2^N) */
- PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */
- PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */
- PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */
- PARAM_STABLE_COUNT, /* PLL-U STABLE count */
- PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */
- PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */
- PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */
- PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */
-
- PARAM_COUNT
-};
-
-/* Possible port types (dual role mode) */
-enum dr_mode {
- DR_MODE_NONE = 0,
- DR_MODE_HOST, /* supports host operation */
- DR_MODE_DEVICE, /* supports device operation */
- DR_MODE_OTG, /* supports both */
-};
-
-/* Information about a USB port */
-struct fdt_usb {
- struct usb_ctlr *reg; /* address of registers in physical memory */
- unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */
- unsigned enabled:1; /* 1 to enable, 0 to disable */
- unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
- enum dr_mode dr_mode; /* dual role mode */
- enum periph_id periph_id;/* peripheral id */
- struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */
-};
-
-static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
-static unsigned port_count; /* Number of available ports */
-static int port_current; /* Current port (-1 = none) */
-
-/*
- * This table has USB timing parameters for each Oscillator frequency we
- * support. There are four sets of values:
- *
- * 1. PLLU configuration information (reference clock is osc/clk_m and
- * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
- *
- * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
- * ----------------------------------------------------------------------
- * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0)
- * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a)
- * Filter frequency (MHz) 1 4.8 6 2
- * CPCON 1100b 0011b 1100b 1100b
- * LFCON0 0 0 0 0
- *
- * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
- *
- * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
- * ---------------------------------------------------------------------------
- * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04)
- * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66)
- * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09)
- * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE)
- *
- * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
- * SessEnd. Each of these signals have their own debouncer and for each of
- * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
- * BIAS_DEBOUNCE_B).
- *
- * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
- * 0xffff -> No debouncing at all
- * <n> ms = <n> *1000 / (1/19.2MHz) / 4
- *
- * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
- * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0
- *
- * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
- * values, so we can keep those to default.
- *
- * 4. The 20 microsecond delay after bias cell operation.
- */
-static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
- /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
- { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
- { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
- { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
- { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
-};
-
-/* UTMIP Idle Wait Delay */
-static const u8 utmip_idle_wait_delay = 17;
-
-/* UTMIP Elastic limit */
-static const u8 utmip_elastic_limit = 16;
-
-/* UTMIP High Speed Sync Start Delay */
-static const u8 utmip_hs_sync_start_delay = 9;
-
-/* Put the port into host mode (this only works for OTG ports) */
-static void set_host_mode(struct fdt_usb *config)
-{
- if (config->dr_mode == DR_MODE_OTG) {
- /* Check whether remote host from USB1 is driving VBus */
- if (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)
- return;
-
- /*
- * If not driving, we set the GPIO to enable VBUS. We assume
- * that the pinmux is set up correctly for this.
- */
- if (fdt_gpio_isvalid(&config->vbus_gpio)) {
- fdtdec_setup_gpio(&config->vbus_gpio);
- gpio_direction_output(config->vbus_gpio.gpio, 1);
- debug("set_host_mode: GPIO %d high\n",
- config->vbus_gpio.gpio);
- }
- }
-}
-
-void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
-{
- /* Reset the USB controller with 2us delay */
- reset_periph(config->periph_id, 2);
-
- /*
- * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
- * base address
- */
- if (config->has_legacy_mode)
- setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
-
- /* Put UTMIP1/3 in reset */
- setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
- /* Enable the UTMIP PHY */
- if (config->utmi)
- setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
-
- /*
- * TODO: where do we take the USB1 out of reset? The old code would
- * take USB3 out of reset, but not USB1. This code doesn't do either.
- */
-}
-
-/* set up the USB controller with the parameters provided */
-static int init_usb_controller(struct fdt_usb *config,
- struct usb_ctlr *usbctlr, const u32 timing[])
-{
- u32 val;
- int loop_count;
-
- clock_enable(config->periph_id);
-
- /* Reset the usb controller */
- usbf_reset_controller(config, usbctlr);
-
- /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
- clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
- /* Follow the crystal clock disable by >100ns delay */
- udelay(1);
-
- /*
- * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
- * mux must be switched to actually use a_sess_vld threshold.
- */
- if (fdt_gpio_isvalid(&config->vbus_gpio)) {
- clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
- VBUS_SENSE_CTL_MASK,
- VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
- }
-
- /*
- * PLL Delay CONFIGURATION settings. The following parameters control
- * the bring up of the plls.
- */
- val = readl(&usbctlr->utmip_misc_cfg1);
- clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
- timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
- clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
- timing[PARAM_ACTIVE_DELAY_COUNT] <<
- UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
- writel(val, &usbctlr->utmip_misc_cfg1);
-
- /* Set PLL enable delay count and crystal frequency count */
- val = readl(&usbctlr->utmip_pll_cfg1);
- clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
- timing[PARAM_ENABLE_DELAY_COUNT] <<
- UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
- clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
- timing[PARAM_XTAL_FREQ_COUNT] <<
- UTMIP_XTAL_FREQ_COUNT_SHIFT);
- writel(val, &usbctlr->utmip_pll_cfg1);
-
- /* Setting the tracking length time */
- clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
- UTMIP_BIAS_PDTRK_COUNT_MASK,
- timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
-
- /* Program debounce time for VBUS to become valid */
- clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
- UTMIP_DEBOUNCE_CFG0_MASK,
- timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
-
- setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
-
- /* Disable battery charge enabling bit */
- setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
-
- clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
- setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
-
- /*
- * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
- * Setting these fields, together with default values of the
- * other fields, results in programming the registers below as
- * follows:
- * UTMIP_HSRX_CFG0 = 0x9168c000
- * UTMIP_HSRX_CFG1 = 0x13
- */
-
- /* Set PLL enable delay count and Crystal frequency count */
- val = readl(&usbctlr->utmip_hsrx_cfg0);
- clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
- utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
- clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
- utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
- writel(val, &usbctlr->utmip_hsrx_cfg0);
-
- /* Configure the UTMIP_HS_SYNC_START_DLY */
- clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
- UTMIP_HS_SYNC_START_DLY_MASK,
- utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
-
- /* Preceed the crystal clock disable by >100ns delay. */
- udelay(1);
-
- /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
- setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
-
- /* Finished the per-controller init. */
-
- /* De-assert UTMIP_RESET to bring out of reset. */
- clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
-
- /* Wait for the phy clock to become valid in 100 ms */
- for (loop_count = 100000; loop_count != 0; loop_count--) {
- if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
- break;
- udelay(1);
- }
- if (!loop_count)
- return -1;
-
- return 0;
-}
-
-static void power_up_port(struct usb_ctlr *usbctlr)
-{
- /* Deassert power down state */
- clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
- UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
- clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
- UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
-}
-
-static void config_clock(const u32 timing[])
-{
- clock_start_pll(CLOCK_ID_USB,
- timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
- timing[PARAM_CPCON], timing[PARAM_LFCON]);
-}
-
-/**
- * Add a new USB port to the list of available ports.
- *
- * @param config USB port configuration
- * @return 0 if ok, -1 if error (too many ports)
- */
-static int add_port(struct fdt_usb *config, const u32 timing[])
-{
- struct usb_ctlr *usbctlr = config->reg;
-
- if (port_count == USB_PORTS_MAX) {
- debug("tegrausb: Cannot register more than %d ports\n",
- USB_PORTS_MAX);
- return -1;
- }
- if (init_usb_controller(config, usbctlr, timing)) {
- debug("tegrausb: Cannot init port\n");
- return -1;
- }
- if (config->utmi) {
- /* Disable ICUSB FS/LS transceiver */
- clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
-
- /* Select UTMI parallel interface */
- clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
- PTS_UTMI << PTS_SHIFT);
- clrbits_le32(&usbctlr->port_sc1, STS);
- power_up_port(usbctlr);
- }
- port[port_count++] = *config;
-
- return 0;
-}
-
-int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor)
-{
- struct usb_ctlr *usbctlr;
-
- if (portnum >= port_count)
- return -1;
- tegrausb_stop_port();
- set_host_mode(&port[portnum]);
-
- usbctlr = port[portnum].reg;
- *hccr = (u32)&usbctlr->cap_length;
- *hcor = (u32)&usbctlr->usb_cmd;
- port_current = portnum;
- return 0;
-}
-
-int tegrausb_stop_port(void)
-{
- struct usb_ctlr *usbctlr;
-
- if (port_current == -1)
- return -1;
-
- usbctlr = port[port_current].reg;
-
- /* Stop controller */
- writel(0, &usbctlr->usb_cmd);
- udelay(1000);
-
- /* Initiate controller reset */
- writel(2, &usbctlr->usb_cmd);
- udelay(1000);
- port_current = -1;
- return 0;
-}
-
-int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz,
- struct fdt_usb *config)
-{
- const char *phy, *mode;
-
- config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
- mode = fdt_getprop(blob, node, "dr_mode", NULL);
- if (mode) {
- if (0 == strcmp(mode, "host"))
- config->dr_mode = DR_MODE_HOST;
- else if (0 == strcmp(mode, "peripheral"))
- config->dr_mode = DR_MODE_DEVICE;
- else if (0 == strcmp(mode, "otg"))
- config->dr_mode = DR_MODE_OTG;
- else {
- debug("%s: Cannot decode dr_mode '%s'\n", __func__,
- mode);
- return -FDT_ERR_NOTFOUND;
- }
- } else {
- config->dr_mode = DR_MODE_HOST;
- }
-
- phy = fdt_getprop(blob, node, "phy_type", NULL);
- config->utmi = phy && 0 == strcmp("utmi", phy);
- config->enabled = fdtdec_get_is_enabled(blob, node);
- config->has_legacy_mode = fdtdec_get_bool(blob, node,
- "nvidia,has-legacy-mode");
- config->periph_id = clock_decode_periph_id(blob, node);
- if (config->periph_id == PERIPH_ID_NONE) {
- debug("%s: Missing/invalid peripheral ID\n", __func__);
- return -FDT_ERR_NOTFOUND;
- }
- fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
- debug("enabled=%d, legacy_mode=%d, utmi=%d, periph_id=%d, vbus=%d, "
- "dr_mode=%d\n", config->enabled, config->has_legacy_mode,
- config->utmi, config->periph_id, config->vbus_gpio.gpio,
- config->dr_mode);
-
- return 0;
-}
-
-int board_usb_init(const void *blob)
-{
- struct fdt_usb config;
- unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
- enum clock_osc_freq freq;
- int node_list[USB_PORTS_MAX];
- int node, count, i;
-
- /* Set up the USB clocks correctly based on our oscillator frequency */
- freq = clock_get_osc_freq();
- config_clock(usb_pll[freq]);
-
- /* count may return <0 on error */
- count = fdtdec_find_aliases_for_id(blob, "usb",
- COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
- for (i = 0; i < count; i++) {
- debug("USB %d: ", i);
- node = node_list[i];
- if (!node)
- continue;
- if (fdt_decode_usb(blob, node, osc_freq, &config)) {
- debug("Cannot decode USB node %s\n",
- fdt_get_name(blob, node, NULL));
- return -1;
- }
-
- if (add_port(&config, usb_pll[freq]))
- return -1;
- set_host_mode(&config);
- }
- port_current = -1;
-
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2010 - 2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-#include <asm/arch/ap20.h>
-#include <asm/arch/clk_rst.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/pmc.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/fuse.h>
-#include <asm/arch/emc.h>
-#include <asm/arch/gp_padctrl.h>
-#include <asm/arch/warmboot.h>
-#include <asm/arch/sdram_param.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_TEGRA_CLOCK_SCALING
-#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA2_LP0"
-#endif
-
-/*
- * This is the place in SRAM where the SDRAM parameters are stored. There
- * are 4 blocks, one for each RAM code
- */
-#define SDRAM_PARAMS_BASE (AP20_BASE_PA_SRAM + 0x188)
-
-/* TODO: If we later add support for the Misc GP controller, refactor this */
-union xm2cfga_reg {
- struct {
- u32 reserved0:2;
- u32 hsm_en:1;
- u32 reserved1:2;
- u32 preemp_en:1;
- u32 vref_en:1;
- u32 reserved2:5;
- u32 cal_drvdn:5;
- u32 reserved3:3;
- u32 cal_drvup:5;
- u32 reserved4:3;
- u32 cal_drvdn_slwr:2;
- u32 cal_drvup_slwf:2;
- };
- u32 word;
-};
-
-union xm2cfgd_reg {
- struct {
- u32 reserved0:2;
- u32 hsm_en:1;
- u32 schmt_en:1;
- u32 lpmd:2;
- u32 vref_en:1;
- u32 reserved1:5;
- u32 cal_drvdn:5;
- u32 reserved2:3;
- u32 cal_drvup:5;
- u32 reserved3:3;
- u32 cal_drvdn_slwr:2;
- u32 cal_drvup_slwf:2;
- };
- u32 word;
-};
-
-/*
- * TODO: This register is not documented in the TRM yet. We could move this
- * into the EMC and give it a proper interface, but not while it is
- * undocumented.
- */
-union fbio_spare_reg {
- struct {
- u32 reserved:24;
- u32 cfg_wb0:8;
- };
- u32 word;
-};
-
-/* We pack the resume information into these unions for later */
-union scratch2_reg {
- struct {
- u32 pllm_base_divm:5;
- u32 pllm_base_divn:10;
- u32 pllm_base_divp:3;
- u32 pllm_misc_lfcon:4;
- u32 pllm_misc_cpcon:4;
- u32 gp_xm2cfga_padctrl_preemp:1;
- u32 gp_xm2cfgd_padctrl_schmt:1;
- u32 osc_ctrl_xobp:1;
- u32 memory_type:3;
- };
- u32 word;
-};
-
-union scratch4_reg {
- struct {
- u32 emc_clock_divider:8;
- u32 pllm_stable_time:8;
- u32 pllx_stable_time:8;
- u32 emc_fbio_spare_cfg_wb0:8;
- };
- u32 word;
-};
-
-union scratch24_reg {
- struct {
- u32 emc_auto_cal_wait:8;
- u32 emc_pin_program_wait:8;
- u32 warmboot_wait:8;
- u32 reserved:8;
- };
- u32 word;
-};
-
-int warmboot_save_sdram_params(void)
-{
- u32 ram_code;
- struct sdram_params sdram;
- struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
- struct apb_misc_gp_ctlr *gp =
- (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE;
- struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob);
- union scratch2_reg scratch2;
- union scratch4_reg scratch4;
- union scratch24_reg scratch24;
- union xm2cfga_reg xm2cfga;
- union xm2cfgd_reg xm2cfgd;
- union fbio_spare_reg fbio_spare;
-
- /* get ram code that is used as index to array sdram_params in BCT */
- ram_code = (readl(&pmt->pmt_strap_opt_a) >>
- STRAP_OPT_A_RAM_CODE_SHIFT) & 3;
- memcpy(&sdram,
- (char *)((struct sdram_params *)SDRAM_PARAMS_BASE + ram_code),
- sizeof(sdram));
-
- xm2cfga.word = readl(&gp->xm2cfga);
- xm2cfgd.word = readl(&gp->xm2cfgd);
-
- scratch2.word = 0;
- scratch2.osc_ctrl_xobp = clock_get_osc_bypass();
-
- /* Get the memory PLL settings */
- {
- u32 divm, divn, divp, cpcon, lfcon;
-
- if (clock_ll_read_pll(CLOCK_ID_MEMORY, &divm, &divn, &divp,
- &cpcon, &lfcon))
- return -1;
- scratch2.pllm_base_divm = divm;
- scratch2.pllm_base_divn = divn;
- scratch2.pllm_base_divp = divp;
- scratch2.pllm_misc_cpcon = cpcon;
- scratch2.pllm_misc_lfcon = lfcon;
- }
-
- scratch2.gp_xm2cfga_padctrl_preemp = xm2cfga.preemp_en;
- scratch2.gp_xm2cfgd_padctrl_schmt = xm2cfgd.schmt_en;
- scratch2.memory_type = sdram.memory_type;
- writel(scratch2.word, &pmc->pmc_scratch2);
-
- /* collect data from various sources for pmc_scratch4 */
- fbio_spare.word = readl(&emc->fbio_spare);
- scratch4.word = 0;
- scratch4.emc_fbio_spare_cfg_wb0 = fbio_spare.cfg_wb0;
- scratch4.emc_clock_divider = sdram.emc_clock_divider;
- scratch4.pllm_stable_time = -1;
- scratch4.pllx_stable_time = -1;
- writel(scratch4.word, &pmc->pmc_scratch4);
-
- /* collect various data from sdram for pmc_scratch24 */
- scratch24.word = 0;
- scratch24.emc_pin_program_wait = sdram.emc_pin_program_wait;
- scratch24.emc_auto_cal_wait = sdram.emc_auto_cal_wait;
- scratch24.warmboot_wait = sdram.warm_boot_wait;
- writel(scratch24.word, &pmc->pmc_scratch24);
-
- return 0;
-}
-
-static u32 get_major_version(void)
-{
- u32 major_id;
- struct apb_misc_gp_ctlr *gp =
- (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE;
-
- major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >>
- HIDREV_MAJORPREV_SHIFT;
- return major_id;
-}
-
-static int is_production_mode_fuse_set(struct fuse_regs *fuse)
-{
- return readl(&fuse->production_mode);
-}
-
-static int is_odm_production_mode_fuse_set(struct fuse_regs *fuse)
-{
- return readl(&fuse->security_mode);
-}
-
-static int is_failure_analysis_mode(struct fuse_regs *fuse)
-{
- return readl(&fuse->fa);
-}
-
-static int ap20_is_odm_production_mode(void)
-{
- struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE;
-
- if (!is_failure_analysis_mode(fuse) &&
- is_odm_production_mode_fuse_set(fuse))
- return 1;
- else
- return 0;
-}
-
-static int ap20_is_production_mode(void)
-{
- struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE;
-
- if (get_major_version() == 0)
- return 1;
-
- if (!is_failure_analysis_mode(fuse) &&
- is_production_mode_fuse_set(fuse) &&
- !is_odm_production_mode_fuse_set(fuse))
- return 1;
- else
- return 0;
-}
-
-static enum fuse_operating_mode fuse_get_operation_mode(void)
-{
- u32 chip_id;
- struct apb_misc_gp_ctlr *gp =
- (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE;
-
- chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >>
- HIDREV_CHIPID_SHIFT;
- if (chip_id == CHIPID_TEGRA2) {
- if (ap20_is_odm_production_mode()) {
- printf("!! odm_production_mode is not supported !!\n");
- return MODE_UNDEFINED;
- } else
- if (ap20_is_production_mode())
- return MODE_PRODUCTION;
- else
- return MODE_UNDEFINED;
- }
- return MODE_UNDEFINED;
-}
-
-static void determine_crypto_options(int *is_encrypted, int *is_signed,
- int *use_zero_key)
-{
- switch (fuse_get_operation_mode()) {
- case MODE_PRODUCTION:
- *is_encrypted = 0;
- *is_signed = 1;
- *use_zero_key = 1;
- break;
- case MODE_UNDEFINED:
- default:
- *is_encrypted = 0;
- *is_signed = 0;
- *use_zero_key = 0;
- break;
- }
-}
-
-static int sign_wb_code(u32 start, u32 length, int use_zero_key)
-{
- int err;
- u8 *source; /* Pointer to source */
- u8 *hash;
-
- /* Calculate AES block parameters. */
- source = (u8 *)(start + offsetof(struct wb_header, random_aes_block));
- length -= offsetof(struct wb_header, random_aes_block);
- hash = (u8 *)(start + offsetof(struct wb_header, hash));
- err = sign_data_block(source, length, hash);
-
- return err;
-}
-
-int warmboot_prepare_code(u32 seg_address, u32 seg_length)
-{
- int err = 0;
- u32 length; /* length of the signed/encrypt code */
- struct wb_header *dst_header; /* Pointer to dest WB header */
- int is_encrypted; /* Segment is encrypted */
- int is_signed; /* Segment is signed */
- int use_zero_key; /* Use key of all zeros */
-
- /* Determine crypto options. */
- determine_crypto_options(&is_encrypted, &is_signed, &use_zero_key);
-
- /* Get the actual code limits. */
- length = roundup(((u32)wb_end - (u32)wb_start), 16);
-
- /*
- * The region specified by seg_address must be in SDRAM and must be
- * nonzero in length.
- */
- if (seg_length == 0 || seg_address < NV_PA_SDRAM_BASE ||
- seg_address + seg_length >= NV_PA_SDRAM_BASE + gd->ram_size) {
- err = -EFAULT;
- goto fail;
- }
-
- /* Things must be 16-byte aligned. */
- if ((seg_length & 0xF) || (seg_address & 0xF)) {
- err = -EINVAL;
- goto fail;
- }
-
- /* Will the code fit? (destination includes wb_header + wb code) */
- if (seg_length < (length + sizeof(struct wb_header))) {
- err = -EINVAL;
- goto fail;
- }
-
- dst_header = (struct wb_header *)seg_address;
- memset((char *)dst_header, 0, sizeof(struct wb_header));
-
- /* Populate the random_aes_block as requested. */
- {
- u32 *aes_block = (u32 *)&(dst_header->random_aes_block);
- u32 *end = (u32 *)(((u32)aes_block) +
- sizeof(dst_header->random_aes_block));
-
- do {
- *aes_block++ = 0;
- } while (aes_block < end);
- }
-
- /* Populate the header. */
- dst_header->length_insecure = length + sizeof(struct wb_header);
- dst_header->length_secure = length + sizeof(struct wb_header);
- dst_header->destination = AP20_WB_RUN_ADDRESS;
- dst_header->entry_point = AP20_WB_RUN_ADDRESS;
- dst_header->code_length = length;
-
- if (is_encrypted) {
- printf("!!!! Encryption is not supported !!!!\n");
- dst_header->length_insecure = 0;
- err = -EACCES;
- goto fail;
- } else
- /* copy the wb code directly following dst_header. */
- memcpy((char *)(dst_header+1), (char *)wb_start, length);
-
- if (is_signed)
- err = sign_wb_code(seg_address, dst_header->length_insecure,
- use_zero_key);
-
-fail:
- if (err)
- printf("Warning: warmboot code copy failed (error=%d)\n", err);
-
- return err;
-}
+++ /dev/null
-/*
- * (C) Copyright 2010 - 2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/arch/ap20.h>
-#include <asm/arch/clk_rst.h>
-#include <asm/arch/clock.h>
-#include <asm/arch/flow.h>
-#include <asm/arch/pinmux.h>
-#include <asm/arch/pmc.h>
-#include <asm/arch/tegra2.h>
-#include <asm/arch/warmboot.h>
-#include "warmboot_avp.h"
-
-#define DEBUG_RESET_CORESIGHT
-
-void wb_start(void)
-{
- struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
- struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
- struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
- struct clk_rst_ctlr *clkrst =
- (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- union osc_ctrl_reg osc_ctrl;
- union pllx_base_reg pllx_base;
- union pllx_misc_reg pllx_misc;
- union scratch3_reg scratch3;
- u32 reg;
-
- /* enable JTAG & TBE */
- writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &pmt->pmt_cfg_ctl);
-
- /* Are we running where we're supposed to be? */
- asm volatile (
- "adr %0, wb_start;" /* reg: wb_start address */
- : "=r"(reg) /* output */
- /* no input, no clobber list */
- );
-
- if (reg != AP20_WB_RUN_ADDRESS)
- goto do_reset;
-
- /* Are we running with AVP? */
- if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP)
- goto do_reset;
-
-#ifdef DEBUG_RESET_CORESIGHT
- /* Assert CoreSight reset */
- reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
- reg |= SWR_CSITE_RST;
- writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
-#endif
-
- /* TODO: Set the drive strength - maybe make this a board parameter? */
- osc_ctrl.word = readl(&clkrst->crc_osc_ctrl);
- osc_ctrl.xofs = 4;
- osc_ctrl.xoe = 1;
- writel(osc_ctrl.word, &clkrst->crc_osc_ctrl);
-
- /* Power up the CPU complex if necessary */
- if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) {
- reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START;
- writel(reg, &pmc->pmc_pwrgate_toggle);
- while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU))
- ;
- }
-
- /* Remove the I/O clamps from the CPU power partition. */
- reg = readl(&pmc->pmc_remove_clamping);
- reg |= CPU_CLMP;
- writel(reg, &pmc->pmc_remove_clamping);
-
- reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP;
- writel(reg, &flow->halt_cop_events);
-
- /* Assert CPU complex reset */
- reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
- reg |= CPU_RST;
- writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
-
- /* Hold both CPUs in reset */
- reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 |
- CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1;
- writel(reg, &clkrst->crc_cpu_cmplx_set);
-
- /* Halt CPU1 at the flow controller for uni-processor configurations */
- writel(EVENT_MODE_STOP, &flow->halt_cpu1_events);
-
- /*
- * Set the CPU reset vector. SCRATCH41 contains the physical
- * address of the CPU-side restoration code.
- */
- reg = readl(&pmc->pmc_scratch41);
- writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR);
-
- /* Select CPU complex clock source */
- writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
-
- /* Start the CPU0 clock and stop the CPU1 clock */
- reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN |
- CPU_CMPLX_CPU1_CLK_STP_STOP;
- writel(reg, &clkrst->crc_clk_cpu_cmplx);
-
- /* Enable the CPU complex clock */
- reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
- reg |= CLK_ENB_CPU;
- writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
-
- /* Make sure the resets were held for at least 2 microseconds */
- reg = readl(TIMER_USEC_CNTR);
- while (readl(TIMER_USEC_CNTR) <= (reg + 2))
- ;
-
-#ifdef DEBUG_RESET_CORESIGHT
- /*
- * De-assert CoreSight reset.
- * NOTE: We're leaving the CoreSight clock on the oscillator for
- * now. It will be restored to its original clock source
- * when the CPU-side restoration code runs.
- */
- reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
- reg &= ~SWR_CSITE_RST;
- writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
-#endif
-
- /* Unlock the CPU CoreSight interfaces */
- reg = 0xC5ACCE55;
- writel(reg, CSITE_CPU_DBG0_LAR);
- writel(reg, CSITE_CPU_DBG1_LAR);
-
- /*
- * Sample the microsecond timestamp again. This is the time we must
- * use when returning from LP0 for PLL stabilization delays.
- */
- reg = readl(TIMER_USEC_CNTR);
- writel(reg, &pmc->pmc_scratch1);
-
- pllx_base.word = 0;
- pllx_misc.word = 0;
- scratch3.word = readl(&pmc->pmc_scratch3);
-
- /* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */
- reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1;
-
- /*
- * According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and
- * USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz.
- *
- * reg is used to calculate the pllx freq, which is used to determine if
- * to set dccon or not.
- */
- if (reg > 26)
- reg = 19;
-
- /* PLLX_BASE.PLLX_DIVM */
- if (scratch3.pllx_base_divm == reg)
- reg = 0;
- else
- reg = 1;
-
- /* PLLX_BASE.PLLX_DIVN */
- pllx_base.divn = scratch3.pllx_base_divn;
- reg = scratch3.pllx_base_divn << reg;
-
- /* PLLX_BASE.PLLX_DIVP */
- pllx_base.divp = scratch3.pllx_base_divp;
- reg = reg >> scratch3.pllx_base_divp;
-
- pllx_base.bypass = 1;
-
- /* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */
- if (reg > 600)
- pllx_misc.dccon = 1;
-
- /* PLLX_MISC_LFCON */
- pllx_misc.lfcon = scratch3.pllx_misc_lfcon;
-
- /* PLLX_MISC_CPCON */
- pllx_misc.cpcon = scratch3.pllx_misc_cpcon;
-
- writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc);
- writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
-
- pllx_base.enable = 1;
- writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
- pllx_base.bypass = 0;
- writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
-
- writel(0, flow->halt_cpu_events);
-
- reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0;
- writel(reg, &clkrst->crc_cpu_cmplx_clr);
-
- reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE |
- PLLM_OUT1_RATIO_VAL_8;
- writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out);
-
- reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 |
- SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 |
- SCLK_SYS_STATE_IDLE;
- writel(reg, &clkrst->crc_sclk_brst_pol);
-
- /* avp_resume: no return after the write */
- reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
- reg &= ~CPU_RST;
- writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
-
- /* avp_halt: */
-avp_halt:
- reg = EVENT_MODE_STOP | EVENT_JTAG;
- writel(reg, flow->halt_cop_events);
- goto avp_halt;
-
-do_reset:
- /*
- * Execution comes here if something goes wrong. The chip is reset and
- * a cold boot is performed.
- */
- writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
- goto do_reset;
-}
-
-/*
- * wb_end() is a dummy function, and must be directly following wb_start(),
- * and is used to calculate the size of wb_start().
- */
-void wb_end(void)
-{
-}
+++ /dev/null
-/*
- * (C) Copyright 2010, 2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _WARMBOOT_AVP_H_
-#define _WARMBOOT_AVP_H_
-
-#define TEGRA_DEV_L 0
-#define TEGRA_DEV_H 1
-#define TEGRA_DEV_U 2
-
-#define SIMPLE_PLLX (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE)
-#define SIMPLE_PLLE (CLOCK_ID_EPCI - CLOCK_ID_FIRST_SIMPLE)
-
-#define TIMER_USEC_CNTR (NV_PA_TMRUS_BASE + 0)
-#define TIMER_USEC_CFG (NV_PA_TMRUS_BASE + 4)
-
-#define USEC_CFG_DIVISOR_MASK 0xffff
-
-#define CONFIG_CTL_TBE (1 << 7)
-#define CONFIG_CTL_JTAG (1 << 6)
-
-#define CPU_RST (1 << 0)
-#define CLK_ENB_CPU (1 << 0)
-#define SWR_TRIG_SYS_RST (1 << 2)
-#define SWR_CSITE_RST (1 << 9)
-
-#define PWRGATE_STATUS_CPU (1 << 0)
-#define PWRGATE_TOGGLE_PARTID_CPU (0 << 0)
-#define PWRGATE_TOGGLE_START (1 << 8)
-
-#define CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 (3 << 0)
-#define CPU_CMPLX_CPU0_CLK_STP_STOP (1 << 8)
-#define CPU_CMPLX_CPU0_CLK_STP_RUN (0 << 8)
-#define CPU_CMPLX_CPU1_CLK_STP_STOP (1 << 9)
-#define CPU_CMPLX_CPU1_CLK_STP_RUN (0 << 9)
-
-#define CPU_CMPLX_CPURESET0 (1 << 0)
-#define CPU_CMPLX_CPURESET1 (1 << 1)
-#define CPU_CMPLX_DERESET0 (1 << 4)
-#define CPU_CMPLX_DERESET1 (1 << 5)
-#define CPU_CMPLX_DBGRESET0 (1 << 12)
-#define CPU_CMPLX_DBGRESET1 (1 << 13)
-
-#define PLLM_OUT1_RSTN_RESET_DISABLE (1 << 0)
-#define PLLM_OUT1_CLKEN_ENABLE (1 << 1)
-#define PLLM_OUT1_RATIO_VAL_8 (8 << 8)
-
-#define SCLK_SYS_STATE_IDLE (1 << 28)
-#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 (7 << 12)
-#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 (7 << 8)
-#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1 (7 << 4)
-#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 (7 << 0)
-
-#define EVENT_ZERO_VAL_20 (20 << 0)
-#define EVENT_MSEC (1 << 24)
-#define EVENT_JTAG (1 << 28)
-#define EVENT_MODE_STOP (2 << 29)
-
-#define CCLK_PLLP_BURST_POLICY 0x20004444
-
-#endif
--- /dev/null
+#
+# (C) Copyright 2010,2011 Nvidia Corporation.
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# The AVP is ARMv4T architecture so we must use special compiler
+# flags for any startup files it might use.
+CFLAGS_arch/arm/cpu/armv7/tegra20/ap20.o += -march=armv4t
+CFLAGS_arch/arm/cpu/armv7/tegra20/clock.o += -march=armv4t
+CFLAGS_arch/arm/cpu/armv7/tegra20/warmboot_avp.o += -march=armv4t
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+SOBJS := lowlevel_init.o
+COBJS-y := ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o
+COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+COBJS-$(CONFIG_TEGRA_PMU) += pmu.o
+COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o
+COBJS-$(CONFIG_TEGRA20_LP0) += crypto.o warmboot.o warmboot_avp.o
+COBJS-$(CONFIG_CMD_ENTERRCM) += cmd_enterrcm.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+* (C) Copyright 2010-2011
+* NVIDIA Corporation <www.nvidia.com>
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <asm/io.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/fuse.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/scu.h>
+#include <asm/arch/warmboot.h>
+#include <common.h>
+
+int tegra_get_chip_type(void)
+{
+ struct apb_misc_gp_ctlr *gp;
+ struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+ uint tegra_sku_id, rev;
+
+ /*
+ * This is undocumented, Chip ID is bits 15:8 of the register
+ * APB_MISC + 0x804, and has value 0x20 for Tegra20, 0x30 for
+ * Tegra30
+ */
+ gp = (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+ rev = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> HIDREV_CHIPID_SHIFT;
+
+ tegra_sku_id = readl(&fuse->sku_info) & 0xff;
+
+ switch (rev) {
+ case CHIPID_TEGRA20:
+ switch (tegra_sku_id) {
+ case SKU_ID_T20:
+ return TEGRA_SOC_T20;
+ case SKU_ID_T25SE:
+ case SKU_ID_AP25:
+ case SKU_ID_T25:
+ case SKU_ID_AP25E:
+ case SKU_ID_T25E:
+ return TEGRA_SOC_T25;
+ }
+ break;
+ }
+ /* unknown sku id */
+ return TEGRA_SOC_UNKNOWN;
+}
+
+/* Returns 1 if the current CPU executing is a Cortex-A9, else 0 */
+static int ap20_cpu_is_cortexa9(void)
+{
+ u32 id = readb(NV_PA_PG_UP_BASE + PG_UP_TAG_0);
+ return id == (PG_UP_TAG_0_PID_CPU & 0xff);
+}
+
+void init_pllx(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ struct clk_pll_simple *pll =
+ &clkrst->crc_pll_simple[CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE];
+ u32 reg;
+
+ /* If PLLX is already enabled, just return */
+ if (readl(&pll->pll_base) & PLL_ENABLE_MASK)
+ return;
+
+ /* Set PLLX_MISC */
+ writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc);
+
+ /* Use 12MHz clock here */
+ reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT);
+ reg |= 1000 << PLL_DIVN_SHIFT;
+ writel(reg, &pll->pll_base);
+
+ reg |= PLL_ENABLE_MASK;
+ writel(reg, &pll->pll_base);
+
+ reg &= ~PLL_BYPASS_MASK;
+ writel(reg, &pll->pll_base);
+}
+
+static void enable_cpu_clock(int enable)
+{
+ struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 clk;
+
+ /*
+ * NOTE:
+ * Regardless of whether the request is to enable or disable the CPU
+ * clock, every processor in the CPU complex except the master (CPU 0)
+ * will have it's clock stopped because the AVP only talks to the
+ * master. The AVP does not know (nor does it need to know) that there
+ * are multiple processors in the CPU complex.
+ */
+
+ if (enable) {
+ /* Initialize PLLX */
+ init_pllx();
+
+ /* Wait until all clocks are stable */
+ udelay(PLL_STABILIZATION_DELAY);
+
+ writel(CCLK_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+ writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
+ }
+
+ /*
+ * Read the register containing the individual CPU clock enables and
+ * always stop the clock to CPU 1.
+ */
+ clk = readl(&clkrst->crc_clk_cpu_cmplx);
+ clk |= 1 << CPU1_CLK_STP_SHIFT;
+
+ /* Stop/Unstop the CPU clock */
+ clk &= ~CPU0_CLK_STP_MASK;
+ clk |= !enable << CPU0_CLK_STP_SHIFT;
+ writel(clk, &clkrst->crc_clk_cpu_cmplx);
+
+ clock_enable(PERIPH_ID_CPU);
+}
+
+static int is_cpu_powered(void)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+
+ return (readl(&pmc->pmc_pwrgate_status) & CPU_PWRED) ? 1 : 0;
+}
+
+static void remove_cpu_io_clamps(void)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ u32 reg;
+
+ /* Remove the clamps on the CPU I/O signals */
+ reg = readl(&pmc->pmc_remove_clamping);
+ reg |= CPU_CLMP;
+ writel(reg, &pmc->pmc_remove_clamping);
+
+ /* Give I/O signals time to stabilize */
+ udelay(IO_STABILIZATION_DELAY);
+}
+
+static void powerup_cpu(void)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ u32 reg;
+ int timeout = IO_STABILIZATION_DELAY;
+
+ if (!is_cpu_powered()) {
+ /* Toggle the CPU power state (OFF -> ON) */
+ reg = readl(&pmc->pmc_pwrgate_toggle);
+ reg &= PARTID_CP;
+ reg |= START_CP;
+ writel(reg, &pmc->pmc_pwrgate_toggle);
+
+ /* Wait for the power to come up */
+ while (!is_cpu_powered()) {
+ if (timeout-- == 0)
+ printf("CPU failed to power up!\n");
+ else
+ udelay(10);
+ }
+
+ /*
+ * Remove the I/O clamps from CPU power partition.
+ * Recommended only on a Warm boot, if the CPU partition gets
+ * power gated. Shouldn't cause any harm when called after a
+ * cold boot according to HW, probably just redundant.
+ */
+ remove_cpu_io_clamps();
+ }
+}
+
+static void enable_cpu_power_rail(void)
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ u32 reg;
+
+ reg = readl(&pmc->pmc_cntrl);
+ reg |= CPUPWRREQ_OE;
+ writel(reg, &pmc->pmc_cntrl);
+
+ /*
+ * The TI PMU65861C needs a 3.75ms delay between enabling
+ * the power rail and enabling the CPU clock. This delay
+ * between SM1EN and SM1 is for switching time + the ramp
+ * up of the voltage to the CPU (VDD_CPU from PMU).
+ */
+ udelay(3750);
+}
+
+static void reset_A9_cpu(int reset)
+{
+ /*
+ * NOTE: Regardless of whether the request is to hold the CPU in reset
+ * or take it out of reset, every processor in the CPU complex
+ * except the master (CPU 0) will be held in reset because the
+ * AVP only talks to the master. The AVP does not know that there
+ * are multiple processors in the CPU complex.
+ */
+
+ /* Hold CPU 1 in reset, and CPU 0 if asked */
+ reset_cmplx_set_enable(1, crc_rst_cpu | crc_rst_de | crc_rst_debug, 1);
+ reset_cmplx_set_enable(0, crc_rst_cpu | crc_rst_de | crc_rst_debug,
+ reset);
+
+ /* Enable/Disable master CPU reset */
+ reset_set_enable(PERIPH_ID_CPU, reset);
+}
+
+static void clock_enable_coresight(int enable)
+{
+ u32 rst, src;
+
+ clock_set_enable(PERIPH_ID_CORESIGHT, enable);
+ reset_set_enable(PERIPH_ID_CORESIGHT, !enable);
+
+ if (enable) {
+ /*
+ * Put CoreSight on PLLP_OUT0 (216 MHz) and divide it down by
+ * 1.5, giving an effective frequency of 144MHz.
+ * Set PLLP_OUT0 [bits31:30 = 00], and use a 7.1 divisor
+ * (bits 7:0), so 00000001b == 1.5 (n+1 + .5)
+ */
+ src = CLK_DIVIDER(NVBL_PLLP_KHZ, 144000);
+ clock_ll_set_source_divisor(PERIPH_ID_CSI, 0, src);
+
+ /* Unlock the CPU CoreSight interfaces */
+ rst = 0xC5ACCE55;
+ writel(rst, CSITE_CPU_DBG0_LAR);
+ writel(rst, CSITE_CPU_DBG1_LAR);
+ }
+}
+
+void start_cpu(u32 reset_vector)
+{
+ /* Enable VDD_CPU */
+ enable_cpu_power_rail();
+
+ /* Hold the CPUs in reset */
+ reset_A9_cpu(1);
+
+ /* Disable the CPU clock */
+ enable_cpu_clock(0);
+
+ /* Enable CoreSight */
+ clock_enable_coresight(1);
+
+ /*
+ * Set the entry point for CPU execution from reset,
+ * if it's a non-zero value.
+ */
+ if (reset_vector)
+ writel(reset_vector, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+ /* Enable the CPU clock */
+ enable_cpu_clock(1);
+
+ /* If the CPU doesn't already have power, power it up */
+ powerup_cpu();
+
+ /* Take the CPU out of reset */
+ reset_A9_cpu(0);
+}
+
+
+void halt_avp(void)
+{
+ for (;;) {
+ writel((HALT_COP_EVENT_JTAG | HALT_COP_EVENT_IRQ_1 \
+ | HALT_COP_EVENT_FIQ_1 | (FLOW_MODE_STOP<<29)),
+ FLOW_CTLR_HALT_COP_EVENTS);
+ }
+}
+
+void enable_scu(void)
+{
+ struct scu_ctlr *scu = (struct scu_ctlr *)NV_PA_ARM_PERIPHBASE;
+ u32 reg;
+
+ /* If SCU already setup/enabled, return */
+ if (readl(&scu->scu_ctrl) & SCU_CTRL_ENABLE)
+ return;
+
+ /* Invalidate all ways for all processors */
+ writel(0xFFFF, &scu->scu_inv_all);
+
+ /* Enable SCU - bit 0 */
+ reg = readl(&scu->scu_ctrl);
+ reg |= SCU_CTRL_ENABLE;
+ writel(reg, &scu->scu_ctrl);
+}
+
+static u32 get_odmdata(void)
+{
+ /*
+ * ODMDATA is stored in the BCT in IRAM by the BootROM.
+ * The BCT start and size are stored in the BIT in IRAM.
+ * Read the data @ bct_start + (bct_size - 12). This works
+ * on T20 and T30 BCTs, which are locked down. If this changes
+ * in new chips (T114, etc.), we can revisit this algorithm.
+ */
+
+ u32 bct_start, odmdata;
+
+ bct_start = readl(AP20_BASE_PA_SRAM + NVBOOTINFOTABLE_BCTPTR);
+ odmdata = readl(bct_start + BCT_ODMDATA_OFFSET);
+
+ return odmdata;
+}
+
+void init_pmc_scratch(void)
+{
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ u32 odmdata;
+ int i;
+
+ /* SCRATCH0 is initialized by the boot ROM and shouldn't be cleared */
+ for (i = 0; i < 23; i++)
+ writel(0, &pmc->pmc_scratch1+i);
+
+ /* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
+ odmdata = get_odmdata();
+ writel(odmdata, &pmc->pmc_scratch20);
+
+#ifdef CONFIG_TEGRA20_LP0
+ /* save Sdram params to PMC 2, 4, and 24 for WB0 */
+ warmboot_save_sdram_params();
+#endif
+}
+
+void tegra20_start(void)
+{
+ struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+
+ /* If we are the AVP, start up the first Cortex-A9 */
+ if (!ap20_cpu_is_cortexa9()) {
+ /* enable JTAG */
+ writel(0xC0, &pmt->pmt_cfg_ctl);
+
+ /*
+ * If we are ARM7 - give it a different stack. We are about to
+ * start up the A9 which will want to use this one.
+ */
+ asm volatile("mov sp, %0\n"
+ : : "r"(AVP_EARLY_BOOT_STACK_LIMIT));
+
+ start_cpu((u32)_start);
+ halt_avp();
+ /* not reached */
+ }
+
+ /* Init PMC scratch memory */
+ init_pmc_scratch();
+
+ enable_scu();
+
+ /* enable SMP mode and FW for CPU0, by writing to Auxiliary Ctl reg */
+ asm volatile(
+ "mrc p15, 0, r0, c1, c0, 1\n"
+ "orr r0, r0, #0x41\n"
+ "mcr p15, 0, r0, c1, c0, 1\n");
+
+ /* FIXME: should have ap20's L2 disabled too? */
+}
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/tegra20.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+enum {
+ /* UARTs which we can enable */
+ UARTA = 1 << 0,
+ UARTB = 1 << 1,
+ UARTD = 1 << 3,
+ UART_COUNT = 4,
+};
+
+/*
+ * Boot ROM initializes the odmdata in APBDEV_PMC_SCRATCH20_0,
+ * so we are using this value to identify memory size.
+ */
+
+unsigned int query_sdram_size(void)
+{
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ u32 reg;
+
+ reg = readl(&pmc->pmc_scratch20);
+ debug("pmc->pmc_scratch20 (ODMData) = 0x%08x\n", reg);
+
+ /* bits 31:28 in OdmData are used for RAM size */
+ switch ((reg) >> 28) {
+ case 1:
+ return 0x10000000; /* 256 MB */
+ case 2:
+ default:
+ return 0x20000000; /* 512 MB */
+ case 3:
+ return 0x40000000; /* 1GB */
+ }
+}
+
+int dram_init(void)
+{
+ /* We do not initialise DRAM here. We just query the size */
+ gd->ram_size = query_sdram_size();
+ return 0;
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("Board: %s\n", sysinfo.board_string);
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_BOARDINFO */
+
+#ifdef CONFIG_ARCH_CPU_INIT
+/*
+ * Note this function is executed by the ARM7TDMI AVP. It does not return
+ * in this case. It is also called once the A9 starts up, but does nothing in
+ * that case.
+ */
+int arch_cpu_init(void)
+{
+ /* Fire up the Cortex A9 */
+ tegra20_start();
+
+ /* We didn't do this init in start.S, so do it now */
+ cpu_init_cp15();
+
+ /* Initialize essential common plls */
+ clock_early_init();
+
+ return 0;
+}
+#endif
+
+static int uart_configs[] = {
+#if defined(CONFIG_TEGRA20_UARTA_UAA_UAB)
+ FUNCMUX_UART1_UAA_UAB,
+#elif defined(CONFIG_TEGRA20_UARTA_GPU)
+ FUNCMUX_UART1_GPU,
+#elif defined(CONFIG_TEGRA20_UARTA_SDIO1)
+ FUNCMUX_UART1_SDIO1,
+#else
+ FUNCMUX_UART1_IRRX_IRTX,
+#endif
+ FUNCMUX_UART2_IRDA,
+ -1,
+ FUNCMUX_UART4_GMC,
+ -1,
+};
+
+/**
+ * Set up the specified uarts
+ *
+ * @param uarts_ids Mask containing UARTs to init (UARTx)
+ */
+static void setup_uarts(int uart_ids)
+{
+ static enum periph_id id_for_uart[] = {
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+ PERIPH_ID_UART3,
+ PERIPH_ID_UART4,
+ };
+ size_t i;
+
+ for (i = 0; i < UART_COUNT; i++) {
+ if (uart_ids & (1 << i)) {
+ enum periph_id id = id_for_uart[i];
+
+ funcmux_select(id, uart_configs[i]);
+ clock_ll_start_uart(id);
+ }
+ }
+}
+
+void board_init_uart_f(void)
+{
+ int uart_ids = 0; /* bit mask of which UART ids to enable */
+
+#ifdef CONFIG_TEGRA20_ENABLE_UARTA
+ uart_ids |= UARTA;
+#endif
+#ifdef CONFIG_TEGRA20_ENABLE_UARTB
+ uart_ids |= UARTB;
+#endif
+#ifdef CONFIG_TEGRA20_ENABLE_UARTD
+ uart_ids |= UARTD;
+#endif
+ setup_uarts(uart_ids);
+}
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra20 Clock control functions */
+
+#include <asm/io.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/tegra20.h>
+#include <common.h>
+#include <div64.h>
+#include <fdtdec.h>
+
+/*
+ * This is our record of the current clock rate of each clock. We don't
+ * fill all of these in since we are only really interested in clocks which
+ * we use as parents.
+ */
+static unsigned pll_rate[CLOCK_ID_COUNT];
+
+/*
+ * The oscillator frequency is fixed to one of four set values. Based on this
+ * the other clocks are set up appropriately.
+ */
+static unsigned osc_freq[CLOCK_OSC_FREQ_COUNT] = {
+ 13000000,
+ 19200000,
+ 12000000,
+ 26000000,
+};
+
+/*
+ * Clock types that we can use as a source. The Tegra20 has muxes for the
+ * peripheral clocks, and in most cases there are four options for the clock
+ * source. This gives us a clock 'type' and exploits what commonality exists
+ * in the device.
+ *
+ * Letters are obvious, except for T which means CLK_M, and S which means the
+ * clock derived from 32KHz. Beware that CLK_M (also called OSC in the
+ * datasheet) and PLL_M are different things. The former is the basic
+ * clock supplied to the SOC from an external oscillator. The latter is the
+ * memory clock PLL.
+ *
+ * See definitions in clock_id in the header file.
+ */
+enum clock_type_id {
+ CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
+ CLOCK_TYPE_MCPA, /* and so on */
+ CLOCK_TYPE_MCPT,
+ CLOCK_TYPE_PCM,
+ CLOCK_TYPE_PCMT,
+ CLOCK_TYPE_PCMT16, /* CLOCK_TYPE_PCMT with 16-bit divider */
+ CLOCK_TYPE_PCXTS,
+ CLOCK_TYPE_PDCT,
+
+ CLOCK_TYPE_COUNT,
+ CLOCK_TYPE_NONE = -1, /* invalid clock type */
+};
+
+/* return 1 if a peripheral ID is in range */
+#define clock_type_id_isvalid(id) ((id) >= 0 && \
+ (id) < CLOCK_TYPE_COUNT)
+
+char pllp_valid = 1; /* PLLP is set up correctly */
+
+enum {
+ CLOCK_MAX_MUX = 4 /* number of source options for each clock */
+};
+
+/*
+ * Clock source mux for each clock type. This just converts our enum into
+ * a list of mux sources for use by the code. Note that CLOCK_TYPE_PCXTS
+ * is special as it has 5 sources. Since it also has a different number of
+ * bits in its register for the source, we just handle it with a special
+ * case in the code.
+ */
+#define CLK(x) CLOCK_ID_ ## x
+static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX] = {
+ { CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC) },
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO) },
+ { CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC) },
+ { CLK(PERIPH), CLK(CGENERAL), CLK(XCPU), CLK(OSC) },
+ { CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC) },
+};
+
+/*
+ * Clock peripheral IDs which sadly don't match up with PERIPH_ID. This is
+ * not in the header file since it is for purely internal use - we want
+ * callers to use the PERIPH_ID for all access to peripheral clocks to avoid
+ * confusion bewteen PERIPH_ID_... and PERIPHC_...
+ *
+ * We don't call this CLOCK_PERIPH_ID or PERIPH_CLOCK_ID as it would just be
+ * confusing.
+ *
+ * Note to SOC vendors: perhaps define a unified numbering for peripherals and
+ * use it for reset, clock enable, clock source/divider and even pinmuxing
+ * if you can.
+ */
+enum periphc_internal_id {
+ /* 0x00 */
+ PERIPHC_I2S1,
+ PERIPHC_I2S2,
+ PERIPHC_SPDIF_OUT,
+ PERIPHC_SPDIF_IN,
+ PERIPHC_PWM,
+ PERIPHC_SPI1,
+ PERIPHC_SPI2,
+ PERIPHC_SPI3,
+
+ /* 0x08 */
+ PERIPHC_XIO,
+ PERIPHC_I2C1,
+ PERIPHC_DVC_I2C,
+ PERIPHC_TWC,
+ PERIPHC_0c,
+ PERIPHC_10, /* PERIPHC_SPI1, what is this really? */
+ PERIPHC_DISP1,
+ PERIPHC_DISP2,
+
+ /* 0x10 */
+ PERIPHC_CVE,
+ PERIPHC_IDE0,
+ PERIPHC_VI,
+ PERIPHC_1c,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC2,
+ PERIPHC_G3D,
+ PERIPHC_G2D,
+
+ /* 0x18 */
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC4,
+ PERIPHC_VFIR,
+ PERIPHC_EPP,
+ PERIPHC_MPE,
+ PERIPHC_MIPI,
+ PERIPHC_UART1,
+ PERIPHC_UART2,
+
+ /* 0x20 */
+ PERIPHC_HOST1X,
+ PERIPHC_21,
+ PERIPHC_TVO,
+ PERIPHC_HDMI,
+ PERIPHC_24,
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_EMC,
+
+ /* 0x28 */
+ PERIPHC_UART3,
+ PERIPHC_29,
+ PERIPHC_VI_SENSOR,
+ PERIPHC_2b,
+ PERIPHC_2c,
+ PERIPHC_SPI4,
+ PERIPHC_I2C3,
+ PERIPHC_SDMMC3,
+
+ /* 0x30 */
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_VDE,
+ PERIPHC_OWR,
+ PERIPHC_NOR,
+ PERIPHC_CSITE,
+
+ PERIPHC_COUNT,
+
+ PERIPHC_NONE = -1,
+};
+
+/* return 1 if a periphc_internal_id is in range */
+#define periphc_internal_id_isvalid(id) ((id) >= 0 && \
+ (id) < PERIPHC_COUNT)
+
+/*
+ * Clock type for each peripheral clock source. We put the name in each
+ * record just so it is easy to match things up
+ */
+#define TYPE(name, type) type
+static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
+ /* 0x00 */
+ TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
+ TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PCM),
+ TYPE(PERIPHC_PWM, CLOCK_TYPE_PCXTS),
+ TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SPI22, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SPI3, CLOCK_TYPE_PCMT),
+
+ /* 0x08 */
+ TYPE(PERIPHC_XIO, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C1, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_DVC_I2C, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_TWC, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPI1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_DISP1, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_DISP2, CLOCK_TYPE_PDCT),
+
+ /* 0x10 */
+ TYPE(PERIPHC_CVE, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_IDE0, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_G3D, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_G2D, CLOCK_TYPE_MCPA),
+
+ /* 0x18 */
+ TYPE(PERIPHC_NDFLASH, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VFIR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_EPP, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MPE, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_MIPI, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART1, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART2, CLOCK_TYPE_PCMT),
+
+ /* 0x20 */
+ TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVO, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_HDMI, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_TVDAC, CLOCK_TYPE_PDCT),
+ TYPE(PERIPHC_I2C2, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPT),
+
+ /* 0x28 */
+ TYPE(PERIPHC_UART3, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_VI, CLOCK_TYPE_MCPA),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_NONE, CLOCK_TYPE_NONE),
+ TYPE(PERIPHC_SPI4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_I2C3, CLOCK_TYPE_PCMT16),
+ TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PCMT),
+
+ /* 0x30 */
+ TYPE(PERIPHC_UART4, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_UART5, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_VDE, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_OWR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_NOR, CLOCK_TYPE_PCMT),
+ TYPE(PERIPHC_CSITE, CLOCK_TYPE_PCMT),
+};
+
+/*
+ * This array translates a periph_id to a periphc_internal_id
+ *
+ * Not present/matched up:
+ * uint vi_sensor; _VI_SENSOR_0, 0x1A8
+ * SPDIF - which is both 0x08 and 0x0c
+ *
+ */
+#define NONE(name) (-1)
+#define OFFSET(name, value) PERIPHC_ ## name
+static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
+ /* Low word: 31:0 */
+ NONE(CPU),
+ NONE(RESERVED1),
+ NONE(RESERVED2),
+ NONE(AC97),
+ NONE(RTC),
+ NONE(TMR),
+ PERIPHC_UART1,
+ PERIPHC_UART2, /* and vfir 0x68 */
+
+ /* 0x08 */
+ NONE(GPIO),
+ PERIPHC_SDMMC2,
+ NONE(SPDIF), /* 0x08 and 0x0c, unclear which to use */
+ PERIPHC_I2S1,
+ PERIPHC_I2C1,
+ PERIPHC_NDFLASH,
+ PERIPHC_SDMMC1,
+ PERIPHC_SDMMC4,
+
+ /* 0x10 */
+ PERIPHC_TWC,
+ PERIPHC_PWM,
+ PERIPHC_I2S2,
+ PERIPHC_EPP,
+ PERIPHC_VI,
+ PERIPHC_G2D,
+ NONE(USBD),
+ NONE(ISP),
+
+ /* 0x18 */
+ PERIPHC_G3D,
+ PERIPHC_IDE0,
+ PERIPHC_DISP2,
+ PERIPHC_DISP1,
+ PERIPHC_HOST1X,
+ NONE(VCP),
+ NONE(RESERVED30),
+ NONE(CACHE2),
+
+ /* Middle word: 63:32 */
+ NONE(MEM),
+ NONE(AHBDMA),
+ NONE(APBDMA),
+ NONE(RESERVED35),
+ NONE(KBC),
+ NONE(STAT_MON),
+ NONE(PMC),
+ NONE(FUSE),
+
+ /* 0x28 */
+ NONE(KFUSE),
+ NONE(SBC1), /* SBC1, 0x34, is this SPI1? */
+ PERIPHC_NOR,
+ PERIPHC_SPI1,
+ PERIPHC_SPI2,
+ PERIPHC_XIO,
+ PERIPHC_SPI3,
+ PERIPHC_DVC_I2C,
+
+ /* 0x30 */
+ NONE(DSI),
+ PERIPHC_TVO, /* also CVE 0x40 */
+ PERIPHC_MIPI,
+ PERIPHC_HDMI,
+ PERIPHC_CSITE,
+ PERIPHC_TVDAC,
+ PERIPHC_I2C2,
+ PERIPHC_UART3,
+
+ /* 0x38 */
+ NONE(RESERVED56),
+ PERIPHC_EMC,
+ NONE(USB2),
+ NONE(USB3),
+ PERIPHC_MPE,
+ PERIPHC_VDE,
+ NONE(BSEA),
+ NONE(BSEV),
+
+ /* Upper word 95:64 */
+ NONE(SPEEDO),
+ PERIPHC_UART4,
+ PERIPHC_UART5,
+ PERIPHC_I2C3,
+ PERIPHC_SPI4,
+ PERIPHC_SDMMC3,
+ NONE(PCIE),
+ PERIPHC_OWR,
+
+ /* 0x48 */
+ NONE(AFI),
+ NONE(CORESIGHT),
+ NONE(RESERVED74),
+ NONE(AVPUCQ),
+ NONE(RESERVED76),
+ NONE(RESERVED77),
+ NONE(RESERVED78),
+ NONE(RESERVED79),
+
+ /* 0x50 */
+ NONE(RESERVED80),
+ NONE(RESERVED81),
+ NONE(RESERVED82),
+ NONE(RESERVED83),
+ NONE(IRAMA),
+ NONE(IRAMB),
+ NONE(IRAMC),
+ NONE(IRAMD),
+
+ /* 0x58 */
+ NONE(CRAM2),
+};
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+}
+
+int clock_get_osc_bypass(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ return (reg & OSC_XOBP_MASK) >> OSC_XOBP_SHIFT;
+}
+
+/* Returns a pointer to the registers of the given pll */
+static struct clk_pll *get_pll(enum clock_id clkid)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+
+ assert(clock_id_is_pll(clkid));
+ return &clkrst->crc_pll[clkid];
+}
+
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+ u32 *divp, u32 *cpcon, u32 *lfcon)
+{
+ struct clk_pll *pll = get_pll(clkid);
+ u32 data;
+
+ assert(clkid != CLOCK_ID_USB);
+
+ /* Safety check, adds to code size but is small */
+ if (!clock_id_is_pll(clkid) || clkid == CLOCK_ID_USB)
+ return -1;
+ data = readl(&pll->pll_base);
+ *divm = (data & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+ *divn = (data & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT;
+ *divp = (data & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ data = readl(&pll->pll_misc);
+ *cpcon = (data & PLL_CPCON_MASK) >> PLL_CPCON_SHIFT;
+ *lfcon = (data & PLL_LFCON_MASK) >> PLL_LFCON_SHIFT;
+
+ return 0;
+}
+
+unsigned long clock_start_pll(enum clock_id clkid, u32 divm, u32 divn,
+ u32 divp, u32 cpcon, u32 lfcon)
+{
+ struct clk_pll *pll = get_pll(clkid);
+ u32 data;
+
+ /*
+ * We cheat by treating all PLL (except PLLU) in the same fashion.
+ * This works only because:
+ * - same fields are always mapped at same offsets, except DCCON
+ * - DCCON is always 0, doesn't conflict
+ * - M,N, P of PLLP values are ignored for PLLP
+ */
+ data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
+ writel(data, &pll->pll_misc);
+
+ data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
+ (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
+
+ if (clkid == CLOCK_ID_USB)
+ data |= divp << PLLU_VCO_FREQ_SHIFT;
+ else
+ data |= divp << PLL_DIVP_SHIFT;
+ writel(data, &pll->pll_base);
+
+ /* calculate the stable time */
+ return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+}
+
+/* return 1 if a peripheral ID is in range and valid */
+static int clock_periph_id_isvalid(enum periph_id id)
+{
+ if (id < PERIPH_ID_FIRST || id >= PERIPH_ID_COUNT)
+ printf("Peripheral id %d out of range\n", id);
+ else {
+ switch (id) {
+ case PERIPH_ID_RESERVED1:
+ case PERIPH_ID_RESERVED2:
+ case PERIPH_ID_RESERVED30:
+ case PERIPH_ID_RESERVED35:
+ case PERIPH_ID_RESERVED56:
+ case PERIPH_ID_RESERVED74:
+ case PERIPH_ID_RESERVED76:
+ case PERIPH_ID_RESERVED77:
+ case PERIPH_ID_RESERVED78:
+ case PERIPH_ID_RESERVED79:
+ case PERIPH_ID_RESERVED80:
+ case PERIPH_ID_RESERVED81:
+ case PERIPH_ID_RESERVED82:
+ case PERIPH_ID_RESERVED83:
+ printf("Peripheral id %d is reserved\n", id);
+ break;
+ default:
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* Returns a pointer to the clock source register for a peripheral */
+static u32 *get_periph_source_reg(enum periph_id periph_id)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ enum periphc_internal_id internal_id;
+
+ assert(clock_periph_id_isvalid(periph_id));
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(internal_id != -1);
+ return &clkrst->crc_clk_src[internal_id];
+}
+
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+ unsigned divisor)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+ u32 value;
+
+ value = readl(reg);
+
+ value &= ~OUT_CLK_SOURCE_MASK;
+ value |= source << OUT_CLK_SOURCE_SHIFT;
+
+ value &= ~OUT_CLK_DIVISOR_MASK;
+ value |= divisor << OUT_CLK_DIVISOR_SHIFT;
+
+ writel(value, reg);
+}
+
+void clock_ll_set_source(enum periph_id periph_id, unsigned source)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+ source << OUT_CLK_SOURCE_SHIFT);
+}
+
+/**
+ * Given the parent's rate and the required rate for the children, this works
+ * out the peripheral clock divider to use, in 7.1 binary format.
+ *
+ * @param divider_bits number of divider bits (8 or 16)
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param rate required clock rate for this clock
+ * @return divider which should be used
+ */
+static int clk_get_divider(unsigned divider_bits, unsigned long parent_rate,
+ unsigned long rate)
+{
+ u64 divider = parent_rate * 2;
+ unsigned max_divider = 1 << divider_bits;
+
+ divider += rate - 1;
+ do_div(divider, rate);
+
+ if ((s64)divider - 2 < 0)
+ return 0;
+
+ if ((s64)divider - 2 >= max_divider)
+ return -1;
+
+ return divider - 2;
+}
+
+/**
+ * Given the parent's rate and the divider in 7.1 format, this works out the
+ * resulting peripheral clock rate.
+ *
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param divider which should be used in 7.1 format
+ * @return effective clock rate of peripheral
+ */
+static unsigned long get_rate_from_divider(unsigned long parent_rate,
+ int divider)
+{
+ u64 rate;
+
+ rate = (u64)parent_rate * 2;
+ do_div(rate, divider + 2);
+ return rate;
+}
+
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+ enum clock_id parent)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ return get_rate_from_divider(pll_rate[parent],
+ (readl(reg) & OUT_CLK_DIVISOR_MASK) >> OUT_CLK_DIVISOR_SHIFT);
+}
+
+/**
+ * Find the best available 7.1 format divisor given a parent clock rate and
+ * required child clock rate. This function assumes that a second-stage
+ * divisor is available which can divide by powers of 2 from 1 to 256.
+ *
+ * @param divider_bits number of divider bits (8 or 16)
+ * @param parent_rate clock rate of parent clock in Hz
+ * @param rate required clock rate for this clock
+ * @param extra_div value for the second-stage divisor (not set if this
+ * function returns -1.
+ * @return divider which should be used, or -1 if nothing is valid
+ *
+ */
+static int find_best_divider(unsigned divider_bits, unsigned long parent_rate,
+ unsigned long rate, int *extra_div)
+{
+ int shift;
+ int best_divider = -1;
+ int best_error = rate;
+
+ /* try dividers from 1 to 256 and find closest match */
+ for (shift = 0; shift <= 8 && best_error > 0; shift++) {
+ unsigned divided_parent = parent_rate >> shift;
+ int divider = clk_get_divider(divider_bits, divided_parent,
+ rate);
+ unsigned effective_rate = get_rate_from_divider(divided_parent,
+ divider);
+ int error = rate - effective_rate;
+
+ /* Given a valid divider, look for the lowest error */
+ if (divider != -1 && error < best_error) {
+ best_error = error;
+ *extra_div = 1 << shift;
+ best_divider = divider;
+ }
+ }
+
+ /* return what we found - *extra_div will already be set */
+ return best_divider;
+}
+
+/**
+ * Given a peripheral ID and the required source clock, this returns which
+ * value should be programmed into the source mux for that peripheral.
+ *
+ * There is special code here to handle the one source type with 5 sources.
+ *
+ * @param periph_id peripheral to start
+ * @param source PLL id of required parent clock
+ * @param mux_bits Set to number of bits in mux register: 2 or 4
+ * @param divider_bits Set to number of divider bits (8 or 16)
+ * @return mux value (0-4, or -1 if not found)
+ */
+static int get_periph_clock_source(enum periph_id periph_id,
+ enum clock_id parent, int *mux_bits, int *divider_bits)
+{
+ enum clock_type_id type;
+ enum periphc_internal_id internal_id;
+ int mux;
+
+ assert(clock_periph_id_isvalid(periph_id));
+
+ internal_id = periph_id_to_internal_id[periph_id];
+ assert(periphc_internal_id_isvalid(internal_id));
+
+ type = clock_periph_type[internal_id];
+ assert(clock_type_id_isvalid(type));
+
+ /*
+ * Special cases here for the clock with a 4-bit source mux and I2C
+ * with its 16-bit divisor
+ */
+ if (type == CLOCK_TYPE_PCXTS)
+ *mux_bits = 4;
+ else
+ *mux_bits = 2;
+ if (type == CLOCK_TYPE_PCMT16)
+ *divider_bits = 16;
+ else
+ *divider_bits = 8;
+
+ for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
+ if (clock_source[type][mux] == parent)
+ return mux;
+
+ /*
+ * Not found: it might be looking for the 'S' in CLOCK_TYPE_PCXTS
+ * which is not in our table. If not, then they are asking for a
+ * source which this peripheral can't access through its mux.
+ */
+ assert(type == CLOCK_TYPE_PCXTS);
+ assert(parent == CLOCK_ID_SFROM32KHZ);
+ if (type == CLOCK_TYPE_PCXTS && parent == CLOCK_ID_SFROM32KHZ)
+ return 4; /* mux value for this clock */
+
+ /* if we get here, either us or the caller has made a mistake */
+ printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
+ parent);
+ return -1;
+}
+
+/**
+ * Adjust peripheral PLL to use the given divider and source.
+ *
+ * @param periph_id peripheral to adjust
+ * @param source Source number (0-3 or 0-7)
+ * @param mux_bits Number of mux bits (2 or 4)
+ * @param divider Required divider in 7.1 or 15.1 format
+ * @return 0 if ok, -1 on error (requesting a parent clock which is not valid
+ * for this peripheral)
+ */
+static int adjust_periph_pll(enum periph_id periph_id, int source,
+ int mux_bits, unsigned divider)
+{
+ u32 *reg = get_periph_source_reg(periph_id);
+
+ clrsetbits_le32(reg, OUT_CLK_DIVISOR_MASK,
+ divider << OUT_CLK_DIVISOR_SHIFT);
+ udelay(1);
+
+ /* work out the source clock and set it */
+ if (source < 0)
+ return -1;
+ if (mux_bits == 4) {
+ clrsetbits_le32(reg, OUT_CLK_SOURCE4_MASK,
+ source << OUT_CLK_SOURCE4_SHIFT);
+ } else {
+ clrsetbits_le32(reg, OUT_CLK_SOURCE_MASK,
+ source << OUT_CLK_SOURCE_SHIFT);
+ }
+ udelay(2);
+ return 0;
+}
+
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate, int *extra_div)
+{
+ unsigned effective_rate;
+ int mux_bits, divider_bits, source;
+ int divider;
+
+ /* work out the source clock and set it */
+ source = get_periph_clock_source(periph_id, parent, &mux_bits,
+ ÷r_bits);
+
+ if (extra_div)
+ divider = find_best_divider(divider_bits, pll_rate[parent],
+ rate, extra_div);
+ else
+ divider = clk_get_divider(divider_bits, pll_rate[parent],
+ rate);
+ assert(divider >= 0);
+ if (adjust_periph_pll(periph_id, source, mux_bits, divider))
+ return -1U;
+ debug("periph %d, rate=%d, reg=%p = %x\n", periph_id, rate,
+ get_periph_source_reg(periph_id),
+ readl(get_periph_source_reg(periph_id)));
+
+ /* Check what we ended up with. This shouldn't matter though */
+ effective_rate = clock_get_periph_rate(periph_id, parent);
+ if (extra_div)
+ effective_rate /= *extra_div;
+ if (rate != effective_rate)
+ debug("Requested clock rate %u not honored (got %u)\n",
+ rate, effective_rate);
+ return effective_rate;
+}
+
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate)
+{
+ unsigned effective_rate;
+
+ reset_set_enable(periph_id, 1);
+ clock_enable(periph_id);
+
+ effective_rate = clock_adjust_periph_pll_div(periph_id, parent, rate,
+ NULL);
+
+ reset_set_enable(periph_id, 0);
+ return effective_rate;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+ u32 reg;
+
+ /* Enable/disable the clock to this peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ reg = readl(clk);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, clk);
+}
+
+void clock_enable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 1);
+}
+
+void clock_disable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 0);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+ u32 reg;
+
+ /* Enable/disable reset to the peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ reg = readl(reset);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, reset);
+}
+
+void reset_periph(enum periph_id periph_id, int us_delay)
+{
+ /* Put peripheral into reset */
+ reset_set_enable(periph_id, 1);
+ udelay(us_delay);
+
+ /* Remove reset */
+ reset_set_enable(periph_id, 0);
+
+ udelay(us_delay);
+}
+
+void reset_cmplx_set_enable(int cpu, int which, int reset)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 mask;
+
+ /* Form the mask, which depends on the cpu chosen. Tegra20 has 2 */
+ assert(cpu >= 0 && cpu < 2);
+ mask = which << cpu;
+
+ /* either enable or disable those reset for that CPU */
+ if (reset)
+ writel(mask, &clkrst->crc_cpu_cmplx_set);
+ else
+ writel(mask, &clkrst->crc_cpu_cmplx_clr);
+}
+
+unsigned clock_get_rate(enum clock_id clkid)
+{
+ struct clk_pll *pll;
+ u32 base;
+ u32 divm;
+ u64 parent_rate;
+ u64 rate;
+
+ parent_rate = osc_freq[clock_get_osc_freq()];
+ if (clkid == CLOCK_ID_OSC)
+ return parent_rate;
+
+ pll = get_pll(clkid);
+ base = readl(&pll->pll_base);
+
+ /* Oh for bf_unpack()... */
+ rate = parent_rate * ((base & PLL_DIVN_MASK) >> PLL_DIVN_SHIFT);
+ divm = (base & PLL_DIVM_MASK) >> PLL_DIVM_SHIFT;
+ if (clkid == CLOCK_ID_USB)
+ divm <<= (base & PLLU_VCO_FREQ_MASK) >> PLLU_VCO_FREQ_SHIFT;
+ else
+ divm <<= (base & PLL_DIVP_MASK) >> PLL_DIVP_SHIFT;
+ do_div(rate, divm);
+ return rate;
+}
+
+/**
+ * Set the output frequency you want for each PLL clock.
+ * PLL output frequencies are programmed by setting their N, M and P values.
+ * The governing equations are:
+ * VCO = (Fi / m) * n, Fo = VCO / (2^p)
+ * where Fo is the output frequency from the PLL.
+ * Example: Set the output frequency to 216Mhz(Fo) with 12Mhz OSC(Fi)
+ * 216Mhz = ((12Mhz / m) * n) / (2^p) so n=432,m=12,p=1
+ * Please see Tegra TRM section 5.3 to get the detail for PLL Programming
+ *
+ * @param n PLL feedback divider(DIVN)
+ * @param m PLL input divider(DIVN)
+ * @param p post divider(DIVP)
+ * @param cpcon base PLL charge pump(CPCON)
+ * @return 0 if ok, -1 on error (the requested PLL is incorrect and cannot
+ * be overriden), 1 if PLL is already correct
+ */
+static int clock_set_rate(enum clock_id clkid, u32 n, u32 m, u32 p, u32 cpcon)
+{
+ u32 base_reg;
+ u32 misc_reg;
+ struct clk_pll *pll;
+
+ pll = get_pll(clkid);
+
+ base_reg = readl(&pll->pll_base);
+
+ /* Set BYPASS, m, n and p to PLL_BASE */
+ base_reg &= ~PLL_DIVM_MASK;
+ base_reg |= m << PLL_DIVM_SHIFT;
+
+ base_reg &= ~PLL_DIVN_MASK;
+ base_reg |= n << PLL_DIVN_SHIFT;
+
+ base_reg &= ~PLL_DIVP_MASK;
+ base_reg |= p << PLL_DIVP_SHIFT;
+
+ if (clkid == CLOCK_ID_PERIPH) {
+ /*
+ * If the PLL is already set up, check that it is correct
+ * and record this info for clock_verify() to check.
+ */
+ if (base_reg & PLL_BASE_OVRRIDE_MASK) {
+ base_reg |= PLL_ENABLE_MASK;
+ if (base_reg != readl(&pll->pll_base))
+ pllp_valid = 0;
+ return pllp_valid ? 1 : -1;
+ }
+ base_reg |= PLL_BASE_OVRRIDE_MASK;
+ }
+
+ base_reg |= PLL_BYPASS_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ /* Set cpcon to PLL_MISC */
+ misc_reg = readl(&pll->pll_misc);
+ misc_reg &= ~PLL_CPCON_MASK;
+ misc_reg |= cpcon << PLL_CPCON_SHIFT;
+ writel(misc_reg, &pll->pll_misc);
+
+ /* Enable PLL */
+ base_reg |= PLL_ENABLE_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ /* Disable BYPASS */
+ base_reg &= ~PLL_BYPASS_MASK;
+ writel(base_reg, &pll->pll_base);
+
+ return 0;
+}
+
+void clock_ll_start_uart(enum periph_id periph_id)
+{
+ /* Assert UART reset and enable clock */
+ reset_set_enable(periph_id, 1);
+ clock_enable(periph_id);
+ clock_ll_set_source(periph_id, 0); /* UARTx_CLK_SRC = 00, PLLP_OUT0 */
+
+ /* wait for 2us */
+ udelay(2);
+
+ /* De-assert reset to UART */
+ reset_set_enable(periph_id, 0);
+}
+
+#ifdef CONFIG_OF_CONTROL
+/*
+ * Convert a device tree clock ID to our peripheral ID. They are mostly
+ * the same but we are very cautious so we check that a valid clock ID is
+ * provided.
+ *
+ * @param clk_id Clock ID according to tegra20 device tree binding
+ * @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
+ */
+static enum periph_id clk_id_to_periph_id(int clk_id)
+{
+ if (clk_id > 95)
+ return PERIPH_ID_NONE;
+
+ switch (clk_id) {
+ case 1:
+ case 2:
+ case 7:
+ case 10:
+ case 20:
+ case 30:
+ case 35:
+ case 49:
+ case 56:
+ case 74:
+ case 76:
+ case 77:
+ case 78:
+ case 79:
+ case 80:
+ case 81:
+ case 82:
+ case 83:
+ case 91:
+ case 95:
+ return PERIPH_ID_NONE;
+ default:
+ return clk_id;
+ }
+}
+
+int clock_decode_periph_id(const void *blob, int node)
+{
+ enum periph_id id;
+ u32 cell[2];
+ int err;
+
+ err = fdtdec_get_int_array(blob, node, "clocks", cell,
+ ARRAY_SIZE(cell));
+ if (err)
+ return -1;
+ id = clk_id_to_periph_id(cell[1]);
+ assert(clock_periph_id_isvalid(id));
+ return id;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+int clock_verify(void)
+{
+ struct clk_pll *pll = get_pll(CLOCK_ID_PERIPH);
+ u32 reg = readl(&pll->pll_base);
+
+ if (!pllp_valid) {
+ printf("Warning: PLLP %x is not correct\n", reg);
+ return -1;
+ }
+ debug("PLLX %x is correct\n", reg);
+ return 0;
+}
+
+void clock_early_init(void)
+{
+ /*
+ * PLLP output frequency set to 216MHz
+ * PLLC output frequency set to 600Mhz
+ *
+ * TODO: Can we calculate these values instead of hard-coding?
+ */
+ switch (clock_get_osc_freq()) {
+ case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 432, 12, 1, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
+ break;
+
+ case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 432, 26, 1, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
+ break;
+
+ case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
+ clock_set_rate(CLOCK_ID_PERIPH, 432, 13, 1, 8);
+ clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
+ break;
+ case CLOCK_OSC_FREQ_19_2:
+ default:
+ /*
+ * These are not supported. It is too early to print a
+ * message and the UART likely won't work anyway due to the
+ * oscillator being wrong.
+ */
+ break;
+ }
+}
+
+void clock_init(void)
+{
+ pll_rate[CLOCK_ID_MEMORY] = clock_get_rate(CLOCK_ID_MEMORY);
+ pll_rate[CLOCK_ID_PERIPH] = clock_get_rate(CLOCK_ID_PERIPH);
+ pll_rate[CLOCK_ID_CGENERAL] = clock_get_rate(CLOCK_ID_CGENERAL);
+ pll_rate[CLOCK_ID_OSC] = clock_get_rate(CLOCK_ID_OSC);
+ pll_rate[CLOCK_ID_SFROM32KHZ] = 32768;
+ debug("Osc = %d\n", pll_rate[CLOCK_ID_OSC]);
+ debug("PLLM = %d\n", pll_rate[CLOCK_ID_MEMORY]);
+ debug("PLLP = %d\n", pll_rate[CLOCK_ID_PERIPH]);
+}
--- /dev/null
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Derived from code (arch/arm/lib/reset.c) that is:
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * (C) Copyright 2004
+ * DAVE Srl
+ * http://www.dave-tech.it
+ * http://www.wawnet.biz
+ * mailto:info@wawnet.biz
+ *
+ * (C) Copyright 2004 Texas Insturments
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/pmc.h>
+
+static int do_enterrcm(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+
+ puts("Entering RCM...\n");
+ udelay(50000);
+
+ pmc->pmc_scratch0 = 2;
+ disable_interrupts();
+ reset_cpu(0);
+
+ return 0;
+}
+
+U_BOOT_CMD(
+ enterrcm, 1, 0, do_enterrcm,
+ "reset Tegra and enter USB Recovery Mode",
+ ""
+);
--- /dev/null
+#
+# (C) Copyright 2010,2011
+# NVIDIA Corporation <www.nvidia.com>
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+# Tegra has an ARMv4T CPU which runs board_init_f(), so we must build these
+# files with compatible flags
+ifdef CONFIG_TEGRA20
+CFLAGS_arch/arm/lib/board.o += -march=armv4t
+CFLAGS_arch/arm/lib/memset.o += -march=armv4t
+CFLAGS_lib/string.o += -march=armv4t
+CFLAGS_common/cmd_nvedit.o += -march=armv4t
+endif
+
+USE_PRIVATE_LIBGCC = yes
+
+CONFIG_ARCH_DEVICE_TREE := tegra20
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include "crypto.h"
+#include "aes.h"
+
+static u8 zero_key[16];
+
+#define AES_CMAC_CONST_RB 0x87 /* from RFC 4493, Figure 2.2 */
+
+enum security_op {
+ SECURITY_SIGN = 1 << 0, /* Sign the data */
+ SECURITY_ENCRYPT = 1 << 1, /* Encrypt the data */
+};
+
+static void debug_print_vector(char *name, u32 num_bytes, u8 *data)
+{
+ u32 i;
+
+ debug("%s [%d] @0x%08x", name, num_bytes, (u32)data);
+ for (i = 0; i < num_bytes; i++) {
+ if (i % 16 == 0)
+ debug(" = ");
+ debug("%02x", data[i]);
+ if ((i+1) % 16 != 0)
+ debug(" ");
+ }
+ debug("\n");
+}
+
+/**
+ * Apply chain data to the destination using EOR
+ *
+ * Each array is of length AES_AES_KEY_LENGTH.
+ *
+ * \param cbc_chain_data Chain data
+ * \param src Source data
+ * \param dst Destination data, which is modified here
+ */
+static void apply_cbc_chain_data(u8 *cbc_chain_data, u8 *src, u8 *dst)
+{
+ int i;
+
+ for (i = 0; i < 16; i++)
+ *dst++ = *src++ ^ *cbc_chain_data++;
+}
+
+/**
+ * Encrypt some data with AES.
+ *
+ * \param key_schedule Expanded key to use
+ * \param src Source data to encrypt
+ * \param dst Destination buffer
+ * \param num_aes_blocks Number of AES blocks to encrypt
+ */
+static void encrypt_object(u8 *key_schedule, u8 *src, u8 *dst,
+ u32 num_aes_blocks)
+{
+ u8 tmp_data[AES_KEY_LENGTH];
+ u8 *cbc_chain_data;
+ u32 i;
+
+ cbc_chain_data = zero_key; /* Convenient array of 0's for IV */
+
+ for (i = 0; i < num_aes_blocks; i++) {
+ debug("encrypt_object: block %d of %d\n", i, num_aes_blocks);
+ debug_print_vector("AES Src", AES_KEY_LENGTH, src);
+
+ /* Apply the chain data */
+ apply_cbc_chain_data(cbc_chain_data, src, tmp_data);
+ debug_print_vector("AES Xor", AES_KEY_LENGTH, tmp_data);
+
+ /* encrypt the AES block */
+ aes_encrypt(tmp_data, key_schedule, dst);
+ debug_print_vector("AES Dst", AES_KEY_LENGTH, dst);
+
+ /* Update pointers for next loop. */
+ cbc_chain_data = dst;
+ src += AES_KEY_LENGTH;
+ dst += AES_KEY_LENGTH;
+ }
+}
+
+/**
+ * Shift a vector left by one bit
+ *
+ * \param in Input vector
+ * \param out Output vector
+ * \param size Length of vector in bytes
+ */
+static void left_shift_vector(u8 *in, u8 *out, int size)
+{
+ int carry = 0;
+ int i;
+
+ for (i = size - 1; i >= 0; i--) {
+ out[i] = (in[i] << 1) | carry;
+ carry = in[i] >> 7; /* get most significant bit */
+ }
+}
+
+/**
+ * Sign a block of data, putting the result into dst.
+ *
+ * \param key Input AES key, length AES_KEY_LENGTH
+ * \param key_schedule Expanded key to use
+ * \param src Source data of length 'num_aes_blocks' blocks
+ * \param dst Destination buffer, length AES_KEY_LENGTH
+ * \param num_aes_blocks Number of AES blocks to encrypt
+ */
+static void sign_object(u8 *key, u8 *key_schedule, u8 *src, u8 *dst,
+ u32 num_aes_blocks)
+{
+ u8 tmp_data[AES_KEY_LENGTH];
+ u8 left[AES_KEY_LENGTH];
+ u8 k1[AES_KEY_LENGTH];
+ u8 *cbc_chain_data;
+ unsigned i;
+
+ cbc_chain_data = zero_key; /* Convenient array of 0's for IV */
+
+ /* compute K1 constant needed by AES-CMAC calculation */
+ for (i = 0; i < AES_KEY_LENGTH; i++)
+ tmp_data[i] = 0;
+
+ encrypt_object(key_schedule, tmp_data, left, 1);
+ debug_print_vector("AES(key, nonce)", AES_KEY_LENGTH, left);
+
+ left_shift_vector(left, k1, sizeof(left));
+ debug_print_vector("L", AES_KEY_LENGTH, left);
+
+ if ((left[0] >> 7) != 0) /* get MSB of L */
+ k1[AES_KEY_LENGTH-1] ^= AES_CMAC_CONST_RB;
+ debug_print_vector("K1", AES_KEY_LENGTH, k1);
+
+ /* compute the AES-CMAC value */
+ for (i = 0; i < num_aes_blocks; i++) {
+ /* Apply the chain data */
+ apply_cbc_chain_data(cbc_chain_data, src, tmp_data);
+
+ /* for the final block, XOR K1 into the IV */
+ if (i == num_aes_blocks - 1)
+ apply_cbc_chain_data(tmp_data, k1, tmp_data);
+
+ /* encrypt the AES block */
+ aes_encrypt(tmp_data, key_schedule, dst);
+
+ debug("sign_obj: block %d of %d\n", i, num_aes_blocks);
+ debug_print_vector("AES-CMAC Src", AES_KEY_LENGTH, src);
+ debug_print_vector("AES-CMAC Xor", AES_KEY_LENGTH, tmp_data);
+ debug_print_vector("AES-CMAC Dst", AES_KEY_LENGTH, dst);
+
+ /* Update pointers for next loop. */
+ cbc_chain_data = dst;
+ src += AES_KEY_LENGTH;
+ }
+
+ debug_print_vector("AES-CMAC Hash", AES_KEY_LENGTH, dst);
+}
+
+/**
+ * Encrypt and sign a block of data (depending on security mode).
+ *
+ * \param key Input AES key, length AES_KEY_LENGTH
+ * \param oper Security operations mask to perform (enum security_op)
+ * \param src Source data
+ * \param length Size of source data
+ * \param sig_dst Destination address for signature, AES_KEY_LENGTH bytes
+ */
+static int encrypt_and_sign(u8 *key, enum security_op oper, u8 *src,
+ u32 length, u8 *sig_dst)
+{
+ u32 num_aes_blocks;
+ u8 key_schedule[AES_EXPAND_KEY_LENGTH];
+
+ debug("encrypt_and_sign: length = %d\n", length);
+ debug_print_vector("AES key", AES_KEY_LENGTH, key);
+
+ /*
+ * The only need for a key is for signing/checksum purposes, so
+ * if not encrypting, expand a key of 0s.
+ */
+ aes_expand_key(oper & SECURITY_ENCRYPT ? key : zero_key, key_schedule);
+
+ num_aes_blocks = (length + AES_KEY_LENGTH - 1) / AES_KEY_LENGTH;
+
+ if (oper & SECURITY_ENCRYPT) {
+ /* Perform this in place, resulting in src being encrypted. */
+ debug("encrypt_and_sign: begin encryption\n");
+ encrypt_object(key_schedule, src, src, num_aes_blocks);
+ debug("encrypt_and_sign: end encryption\n");
+ }
+
+ if (oper & SECURITY_SIGN) {
+ /* encrypt the data, overwriting the result in signature. */
+ debug("encrypt_and_sign: begin signing\n");
+ sign_object(key, key_schedule, src, sig_dst, num_aes_blocks);
+ debug("encrypt_and_sign: end signing\n");
+ }
+
+ return 0;
+}
+
+int sign_data_block(u8 *source, unsigned length, u8 *signature)
+{
+ return encrypt_and_sign(zero_key, SECURITY_SIGN, source,
+ length, signature);
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010 - 2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CRYPTO_H_
+#define _CRYPTO_H_
+
+/**
+ * Sign a block of data
+ *
+ * \param source Source data
+ * \param length Size of source data
+ * \param signature Destination address for signature, AES_KEY_LENGTH bytes
+ */
+int sign_data_block(u8 *source, unsigned length, u8 *signature);
+
+#endif /* #ifndef _CRYPTO_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/apb_misc.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/emc.h>
+#include <asm/arch/tegra20.h>
+
+/*
+ * The EMC registers have shadow registers. When the EMC clock is updated
+ * in the clock controller, the shadow registers are copied to the active
+ * registers, allowing glitchless memory bus frequency changes.
+ * This function updates the shadow registers for a new clock frequency,
+ * and relies on the clock lock on the emc clock to avoid races between
+ * multiple frequency changes
+ */
+
+/*
+ * This table defines the ordering of the registers provided to
+ * tegra_set_mmc()
+ * TODO: Convert to fdt version once available
+ */
+static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
+ 0x2c, /* RC */
+ 0x30, /* RFC */
+ 0x34, /* RAS */
+ 0x38, /* RP */
+ 0x3c, /* R2W */
+ 0x40, /* W2R */
+ 0x44, /* R2P */
+ 0x48, /* W2P */
+ 0x4c, /* RD_RCD */
+ 0x50, /* WR_RCD */
+ 0x54, /* RRD */
+ 0x58, /* REXT */
+ 0x5c, /* WDV */
+ 0x60, /* QUSE */
+ 0x64, /* QRST */
+ 0x68, /* QSAFE */
+ 0x6c, /* RDV */
+ 0x70, /* REFRESH */
+ 0x74, /* BURST_REFRESH_NUM */
+ 0x78, /* PDEX2WR */
+ 0x7c, /* PDEX2RD */
+ 0x80, /* PCHG2PDEN */
+ 0x84, /* ACT2PDEN */
+ 0x88, /* AR2PDEN */
+ 0x8c, /* RW2PDEN */
+ 0x90, /* TXSR */
+ 0x94, /* TCKE */
+ 0x98, /* TFAW */
+ 0x9c, /* TRPAB */
+ 0xa0, /* TCLKSTABLE */
+ 0xa4, /* TCLKSTOP */
+ 0xa8, /* TREFBW */
+ 0xac, /* QUSE_EXTRA */
+ 0x114, /* FBIO_CFG6 */
+ 0xb0, /* ODT_WRITE */
+ 0xb4, /* ODT_READ */
+ 0x104, /* FBIO_CFG5 */
+ 0x2bc, /* CFG_DIG_DLL */
+ 0x2c0, /* DLL_XFORM_DQS */
+ 0x2c4, /* DLL_XFORM_QUSE */
+ 0x2e0, /* ZCAL_REF_CNT */
+ 0x2e4, /* ZCAL_WAIT_CNT */
+ 0x2a8, /* AUTO_CAL_INTERVAL */
+ 0x2d0, /* CFG_CLKTRIM_0 */
+ 0x2d4, /* CFG_CLKTRIM_1 */
+ 0x2d8, /* CFG_CLKTRIM_2 */
+};
+
+struct emc_ctlr *emc_get_controller(const void *blob)
+{
+ fdt_addr_t addr;
+ int node;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
+ if (node > 0) {
+ addr = fdtdec_get_addr(blob, node, "reg");
+ if (addr != FDT_ADDR_T_NONE)
+ return (struct emc_ctlr *)addr;
+ }
+ return NULL;
+}
+
+/* Error codes we use */
+enum {
+ ERR_NO_EMC_NODE = -10,
+ ERR_NO_EMC_REG,
+ ERR_NO_FREQ,
+ ERR_FREQ_NOT_FOUND,
+ ERR_BAD_REGS,
+ ERR_NO_RAM_CODE,
+ ERR_RAM_CODE_NOT_FOUND,
+};
+
+/**
+ * Find EMC tables for the given ram code.
+ *
+ * The tegra EMC binding has two options, one using the ram code and one not.
+ * We detect which is in use by looking for the nvidia,use-ram-code property.
+ * If this is not present, then the EMC tables are directly below 'node',
+ * otherwise we select the correct emc-tables subnode based on the 'ram_code'
+ * value.
+ *
+ * @param blob Device tree blob
+ * @param node EMC node (nvidia,tegra20-emc compatible string)
+ * @param ram_code RAM code to select (0-3, or -1 if unknown)
+ * @return 0 if ok, otherwise a -ve ERR_ code (see enum above)
+ */
+static int find_emc_tables(const void *blob, int node, int ram_code)
+{
+ int need_ram_code;
+ int depth;
+ int offset;
+
+ /* If we are using RAM codes, scan through the tables for our code */
+ need_ram_code = fdtdec_get_bool(blob, node, "nvidia,use-ram-code");
+ if (!need_ram_code)
+ return node;
+ if (ram_code == -1) {
+ debug("%s: RAM code required but not supplied\n", __func__);
+ return ERR_NO_RAM_CODE;
+ }
+
+ offset = node;
+ depth = 0;
+ do {
+ /*
+ * Sadly there is no compatible string so we cannot use
+ * fdtdec_next_compatible_subnode().
+ */
+ offset = fdt_next_node(blob, offset, &depth);
+ if (depth <= 0)
+ break;
+
+ /* Make sure this is a direct subnode */
+ if (depth != 1)
+ continue;
+ if (strcmp("emc-tables", fdt_get_name(blob, offset, NULL)))
+ continue;
+
+ if (fdtdec_get_int(blob, offset, "nvidia,ram-code", -1)
+ == ram_code)
+ return offset;
+ } while (1);
+
+ debug("%s: Could not find tables for RAM code %d\n", __func__,
+ ram_code);
+ return ERR_RAM_CODE_NOT_FOUND;
+}
+
+/**
+ * Decode the EMC node of the device tree, returning a pointer to the emc
+ * controller and the table to be used for the given rate.
+ *
+ * @param blob Device tree blob
+ * @param rate Clock speed of memory controller in Hz (=2x memory bus rate)
+ * @param emcp Returns address of EMC controller registers
+ * @param tablep Returns pointer to table to program into EMC. There are
+ * TEGRA_EMC_NUM_REGS entries, destined for offsets as per the
+ * emc_reg_addr array.
+ * @return 0 if ok, otherwise a -ve error code which will allow someone to
+ * figure out roughly what went wrong by looking at this code.
+ */
+static int decode_emc(const void *blob, unsigned rate, struct emc_ctlr **emcp,
+ const u32 **tablep)
+{
+ struct apb_misc_pp_ctlr *pp =
+ (struct apb_misc_pp_ctlr *)NV_PA_APB_MISC_BASE;
+ int ram_code;
+ int depth;
+ int node;
+
+ ram_code = (readl(&pp->strapping_opt_a) & RAM_CODE_MASK)
+ >> RAM_CODE_SHIFT;
+ /*
+ * The EMC clock rate is twice the bus rate, and the bus rate is
+ * measured in kHz
+ */
+ rate = rate / 2 / 1000;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_EMC);
+ if (node < 0) {
+ debug("%s: No EMC node found in FDT\n", __func__);
+ return ERR_NO_EMC_NODE;
+ }
+ *emcp = (struct emc_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ if (*emcp == (struct emc_ctlr *)FDT_ADDR_T_NONE) {
+ debug("%s: No EMC node reg property\n", __func__);
+ return ERR_NO_EMC_REG;
+ }
+
+ /* Work out the parent node which contains our EMC tables */
+ node = find_emc_tables(blob, node, ram_code & 3);
+ if (node < 0)
+ return node;
+
+ depth = 0;
+ for (;;) {
+ int node_rate;
+
+ node = fdtdec_next_compatible_subnode(blob, node,
+ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, &depth);
+ if (node < 0)
+ break;
+ node_rate = fdtdec_get_int(blob, node, "clock-frequency", -1);
+ if (node_rate == -1) {
+ debug("%s: Missing clock-frequency\n", __func__);
+ return ERR_NO_FREQ; /* we expect this property */
+ }
+
+ if (node_rate == rate)
+ break;
+ }
+ if (node < 0) {
+ debug("%s: No node found for clock frequency %d\n", __func__,
+ rate);
+ return ERR_FREQ_NOT_FOUND;
+ }
+
+ *tablep = fdtdec_locate_array(blob, node, "nvidia,emc-registers",
+ TEGRA_EMC_NUM_REGS);
+ if (!*tablep) {
+ debug("%s: node '%s' array missing / wrong size\n", __func__,
+ fdt_get_name(blob, node, NULL));
+ return ERR_BAD_REGS;
+ }
+
+ /* All seems well */
+ return 0;
+}
+
+int tegra_set_emc(const void *blob, unsigned rate)
+{
+ struct emc_ctlr *emc;
+ const u32 *table;
+ int err, i;
+
+ err = decode_emc(blob, rate, &emc, &table);
+ if (err) {
+ debug("Warning: no valid EMC (%d), memory timings unset\n",
+ err);
+ return err;
+ }
+
+ debug("%s: Table found, setting EMC values as follows:\n", __func__);
+ for (i = 0; i < TEGRA_EMC_NUM_REGS; i++) {
+ u32 value = fdt32_to_cpu(table[i]);
+ u32 addr = (uintptr_t)emc + emc_reg_addr[i];
+
+ debug(" %#x: %#x\n", addr, value);
+ writel(value, addr);
+ }
+
+ /* trigger emc with new settings */
+ clock_adjust_periph_pll_div(PERIPH_ID_EMC, CLOCK_ID_MEMORY,
+ clock_get_rate(CLOCK_ID_MEMORY), NULL);
+ debug("EMC clock set to %lu\n",
+ clock_get_periph_rate(PERIPH_ID_EMC, CLOCK_ID_MEMORY));
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra20 high-level function multiplexing */
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+
+int funcmux_select(enum periph_id id, int config)
+{
+ int bad_config = config != FUNCMUX_DEFAULT;
+
+ switch (id) {
+ case PERIPH_ID_UART1:
+ switch (config) {
+ case FUNCMUX_UART1_IRRX_IRTX:
+ pinmux_set_func(PINGRP_IRRX, PMUX_FUNC_UARTA);
+ pinmux_set_func(PINGRP_IRTX, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_IRRX);
+ pinmux_tristate_disable(PINGRP_IRTX);
+ break;
+ case FUNCMUX_UART1_UAA_UAB:
+ pinmux_set_func(PINGRP_UAA, PMUX_FUNC_UARTA);
+ pinmux_set_func(PINGRP_UAB, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_UAA);
+ pinmux_tristate_disable(PINGRP_UAB);
+ bad_config = 0;
+ break;
+ case FUNCMUX_UART1_GPU:
+ pinmux_set_func(PINGRP_GPU, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_GPU);
+ bad_config = 0;
+ break;
+ case FUNCMUX_UART1_SDIO1:
+ pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_UARTA);
+ pinmux_tristate_disable(PINGRP_SDIO1);
+ bad_config = 0;
+ break;
+ }
+ if (!bad_config) {
+ /*
+ * Tegra appears to boot with function UARTA pre-
+ * selected on mux group SDB. If two mux groups are
+ * both set to the same function, it's unclear which
+ * group's pins drive the RX signals into the HW.
+ * For UARTA, SDB certainly overrides group IRTX in
+ * practice. To solve this, configure some alternative
+ * function on SDB to avoid the conflict. Also, tri-
+ * state the group to avoid driving any signal onto it
+ * until we know what's connected.
+ */
+ pinmux_tristate_enable(PINGRP_SDB);
+ pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
+ }
+ break;
+
+ case PERIPH_ID_UART2:
+ if (config == FUNCMUX_UART2_IRDA) {
+ pinmux_set_func(PINGRP_UAD, PMUX_FUNC_IRDA);
+ pinmux_tristate_disable(PINGRP_UAD);
+ }
+ break;
+
+ case PERIPH_ID_UART4:
+ if (config == FUNCMUX_UART4_GMC) {
+ pinmux_set_func(PINGRP_GMC, PMUX_FUNC_UARTD);
+ pinmux_tristate_disable(PINGRP_GMC);
+ }
+ break;
+
+ case PERIPH_ID_DVC_I2C:
+ /* there is only one selection, pinmux_config is ignored */
+ if (config == FUNCMUX_DVC_I2CP) {
+ pinmux_set_func(PINGRP_I2CP, PMUX_FUNC_I2C);
+ pinmux_tristate_disable(PINGRP_I2CP);
+ }
+ break;
+
+ case PERIPH_ID_I2C1:
+ /* support pinmux_config of 0 for now, */
+ if (config == FUNCMUX_I2C1_RM) {
+ pinmux_set_func(PINGRP_RM, PMUX_FUNC_I2C);
+ pinmux_tristate_disable(PINGRP_RM);
+ }
+ break;
+ case PERIPH_ID_I2C2: /* I2C2 */
+ switch (config) {
+ case FUNCMUX_I2C2_DDC: /* DDC pin group, select I2C2 */
+ pinmux_set_func(PINGRP_DDC, PMUX_FUNC_I2C2);
+ /* PTA to HDMI */
+ pinmux_set_func(PINGRP_PTA, PMUX_FUNC_HDMI);
+ pinmux_tristate_disable(PINGRP_DDC);
+ break;
+ case FUNCMUX_I2C2_PTA: /* PTA pin group, select I2C2 */
+ pinmux_set_func(PINGRP_PTA, PMUX_FUNC_I2C2);
+ /* set DDC_SEL to RSVDx (RSVD2 works for now) */
+ pinmux_set_func(PINGRP_DDC, PMUX_FUNC_RSVD2);
+ pinmux_tristate_disable(PINGRP_PTA);
+ bad_config = 0;
+ break;
+ }
+ break;
+ case PERIPH_ID_I2C3: /* I2C3 */
+ /* support pinmux_config of 0 for now */
+ if (config == FUNCMUX_I2C3_DTF) {
+ pinmux_set_func(PINGRP_DTF, PMUX_FUNC_I2C3);
+ pinmux_tristate_disable(PINGRP_DTF);
+ }
+ break;
+
+ case PERIPH_ID_SDMMC1:
+ if (config == FUNCMUX_SDMMC1_SDIO1_4BIT) {
+ pinmux_set_func(PINGRP_SDIO1, PMUX_FUNC_SDIO1);
+ pinmux_tristate_disable(PINGRP_SDIO1);
+ }
+ break;
+
+ case PERIPH_ID_SDMMC2:
+ if (config == FUNCMUX_SDMMC2_DTA_DTD_8BIT) {
+ pinmux_set_func(PINGRP_DTA, PMUX_FUNC_SDIO2);
+ pinmux_set_func(PINGRP_DTD, PMUX_FUNC_SDIO2);
+
+ pinmux_tristate_disable(PINGRP_DTA);
+ pinmux_tristate_disable(PINGRP_DTD);
+ }
+ break;
+
+ case PERIPH_ID_SDMMC3:
+ switch (config) {
+ case FUNCMUX_SDMMC3_SDB_SLXA_8BIT:
+ pinmux_set_func(PINGRP_SLXA, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SLXC, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SLXD, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SLXK, PMUX_FUNC_SDIO3);
+
+ pinmux_tristate_disable(PINGRP_SLXA);
+ pinmux_tristate_disable(PINGRP_SLXC);
+ pinmux_tristate_disable(PINGRP_SLXD);
+ pinmux_tristate_disable(PINGRP_SLXK);
+ /* fall through */
+
+ case FUNCMUX_SDMMC3_SDB_4BIT:
+ pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
+ pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
+
+ pinmux_tristate_disable(PINGRP_SDB);
+ pinmux_tristate_disable(PINGRP_SDC);
+ pinmux_tristate_disable(PINGRP_SDD);
+ bad_config = 0;
+ break;
+ }
+ break;
+
+ case PERIPH_ID_SDMMC4:
+ switch (config) {
+ case FUNCMUX_SDMMC4_ATC_ATD_8BIT:
+ pinmux_set_func(PINGRP_ATC, PMUX_FUNC_SDIO4);
+ pinmux_set_func(PINGRP_ATD, PMUX_FUNC_SDIO4);
+
+ pinmux_tristate_disable(PINGRP_ATC);
+ pinmux_tristate_disable(PINGRP_ATD);
+ break;
+
+ case FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT:
+ pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
+ pinmux_tristate_disable(PINGRP_GME);
+ /* fall through */
+
+ case FUNCMUX_SDMMC4_ATB_GMA_4_BIT:
+ pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
+ pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
+
+ pinmux_tristate_disable(PINGRP_ATB);
+ pinmux_tristate_disable(PINGRP_GMA);
+ bad_config = 0;
+ break;
+ }
+ break;
+
+ case PERIPH_ID_KBC:
+ if (config == FUNCMUX_DEFAULT) {
+ enum pmux_pingrp grp[] = {PINGRP_KBCA, PINGRP_KBCB,
+ PINGRP_KBCC, PINGRP_KBCD, PINGRP_KBCE,
+ PINGRP_KBCF};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(grp); i++) {
+ pinmux_tristate_disable(grp[i]);
+ pinmux_set_func(grp[i], PMUX_FUNC_KBC);
+ pinmux_set_pullupdown(grp[i], PMUX_PULL_UP);
+ }
+ }
+ break;
+
+ case PERIPH_ID_USB2:
+ if (config == FUNCMUX_USB2_ULPI) {
+ pinmux_set_func(PINGRP_UAA, PMUX_FUNC_ULPI);
+ pinmux_set_func(PINGRP_UAB, PMUX_FUNC_ULPI);
+ pinmux_set_func(PINGRP_UDA, PMUX_FUNC_ULPI);
+
+ pinmux_tristate_disable(PINGRP_UAA);
+ pinmux_tristate_disable(PINGRP_UAB);
+ pinmux_tristate_disable(PINGRP_UDA);
+ }
+ break;
+
+ case PERIPH_ID_SPI1:
+ if (config == FUNCMUX_SPI1_GMC_GMD) {
+ pinmux_set_func(PINGRP_GMC, PMUX_FUNC_SFLASH);
+ pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
+
+ pinmux_tristate_disable(PINGRP_GMC);
+ pinmux_tristate_disable(PINGRP_GMD);
+ }
+ break;
+
+ default:
+ debug("%s: invalid periph_id %d", __func__, id);
+ return -1;
+ }
+
+ if (bad_config) {
+ debug("%s: invalid config %d for periph_id %d", __func__,
+ config, id);
+ return -1;
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * SoC-specific setup info
+ *
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <linux/linkage.h>
+
+ .align 5
+ENTRY(reset_cpu)
+ ldr r1, rstctl @ get addr for global reset
+ @ reg
+ ldr r3, [r1]
+ orr r3, r3, #0x10
+ str r3, [r1] @ force reset
+ mov r0, r0
+_loop_forever:
+ b _loop_forever
+rstctl:
+ .word PRM_RSTCTRL
+ENDPROC(reset_cpu)
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra20 pin multiplexing functions */
+
+#include <asm/io.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/pinmux.h>
+#include <common.h>
+
+
+/*
+ * This defines the order of the pin mux control bits in the registers. For
+ * some reason there is no correspendence between the tristate, pin mux and
+ * pullup/pulldown registers.
+ */
+enum pmux_ctlid {
+ /* 0: APB_MISC_PP_PIN_MUX_CTL_A_0 */
+ MUXCTL_UAA,
+ MUXCTL_UAB,
+ MUXCTL_UAC,
+ MUXCTL_UAD,
+ MUXCTL_UDA,
+ MUXCTL_RESERVED5,
+ MUXCTL_ATE,
+ MUXCTL_RM,
+
+ MUXCTL_ATB,
+ MUXCTL_RESERVED9,
+ MUXCTL_ATD,
+ MUXCTL_ATC,
+ MUXCTL_ATA,
+ MUXCTL_KBCF,
+ MUXCTL_KBCE,
+ MUXCTL_SDMMC1,
+
+ /* 16: APB_MISC_PP_PIN_MUX_CTL_B_0 */
+ MUXCTL_GMA,
+ MUXCTL_GMC,
+ MUXCTL_HDINT,
+ MUXCTL_SLXA,
+ MUXCTL_OWC,
+ MUXCTL_SLXC,
+ MUXCTL_SLXD,
+ MUXCTL_SLXK,
+
+ MUXCTL_UCA,
+ MUXCTL_UCB,
+ MUXCTL_DTA,
+ MUXCTL_DTB,
+ MUXCTL_RESERVED28,
+ MUXCTL_DTC,
+ MUXCTL_DTD,
+ MUXCTL_DTE,
+
+ /* 32: APB_MISC_PP_PIN_MUX_CTL_C_0 */
+ MUXCTL_DDC,
+ MUXCTL_CDEV1,
+ MUXCTL_CDEV2,
+ MUXCTL_CSUS,
+ MUXCTL_I2CP,
+ MUXCTL_KBCA,
+ MUXCTL_KBCB,
+ MUXCTL_KBCC,
+
+ MUXCTL_IRTX,
+ MUXCTL_IRRX,
+ MUXCTL_DAP1,
+ MUXCTL_DAP2,
+ MUXCTL_DAP3,
+ MUXCTL_DAP4,
+ MUXCTL_GMB,
+ MUXCTL_GMD,
+
+ /* 48: APB_MISC_PP_PIN_MUX_CTL_D_0 */
+ MUXCTL_GME,
+ MUXCTL_GPV,
+ MUXCTL_GPU,
+ MUXCTL_SPDO,
+ MUXCTL_SPDI,
+ MUXCTL_SDB,
+ MUXCTL_SDC,
+ MUXCTL_SDD,
+
+ MUXCTL_SPIH,
+ MUXCTL_SPIG,
+ MUXCTL_SPIF,
+ MUXCTL_SPIE,
+ MUXCTL_SPID,
+ MUXCTL_SPIC,
+ MUXCTL_SPIB,
+ MUXCTL_SPIA,
+
+ /* 64: APB_MISC_PP_PIN_MUX_CTL_E_0 */
+ MUXCTL_LPW0,
+ MUXCTL_LPW1,
+ MUXCTL_LPW2,
+ MUXCTL_LSDI,
+ MUXCTL_LSDA,
+ MUXCTL_LSPI,
+ MUXCTL_LCSN,
+ MUXCTL_LDC,
+
+ MUXCTL_LSCK,
+ MUXCTL_LSC0,
+ MUXCTL_LSC1,
+ MUXCTL_LHS,
+ MUXCTL_LVS,
+ MUXCTL_LM0,
+ MUXCTL_LM1,
+ MUXCTL_LVP0,
+
+ /* 80: APB_MISC_PP_PIN_MUX_CTL_F_0 */
+ MUXCTL_LD0,
+ MUXCTL_LD1,
+ MUXCTL_LD2,
+ MUXCTL_LD3,
+ MUXCTL_LD4,
+ MUXCTL_LD5,
+ MUXCTL_LD6,
+ MUXCTL_LD7,
+
+ MUXCTL_LD8,
+ MUXCTL_LD9,
+ MUXCTL_LD10,
+ MUXCTL_LD11,
+ MUXCTL_LD12,
+ MUXCTL_LD13,
+ MUXCTL_LD14,
+ MUXCTL_LD15,
+
+ /* 96: APB_MISC_PP_PIN_MUX_CTL_G_0 */
+ MUXCTL_LD16,
+ MUXCTL_LD17,
+ MUXCTL_LHP1,
+ MUXCTL_LHP2,
+ MUXCTL_LVP1,
+ MUXCTL_LHP0,
+ MUXCTL_RESERVED102,
+ MUXCTL_LPP,
+
+ MUXCTL_LDI,
+ MUXCTL_PMC,
+ MUXCTL_CRTP,
+ MUXCTL_PTA,
+ MUXCTL_RESERVED108,
+ MUXCTL_KBCD,
+ MUXCTL_GPU7,
+ MUXCTL_DTF,
+
+ MUXCTL_NONE = -1,
+};
+
+/*
+ * And this defines the order of the pullup/pulldown controls which are again
+ * in a different order
+ */
+enum pmux_pullid {
+ /* 0: APB_MISC_PP_PULLUPDOWN_REG_A_0 */
+ PUCTL_ATA,
+ PUCTL_ATB,
+ PUCTL_ATC,
+ PUCTL_ATD,
+ PUCTL_ATE,
+ PUCTL_DAP1,
+ PUCTL_DAP2,
+ PUCTL_DAP3,
+
+ PUCTL_DAP4,
+ PUCTL_DTA,
+ PUCTL_DTB,
+ PUCTL_DTC,
+ PUCTL_DTD,
+ PUCTL_DTE,
+ PUCTL_DTF,
+ PUCTL_GPV,
+
+ /* 16: APB_MISC_PP_PULLUPDOWN_REG_B_0 */
+ PUCTL_RM,
+ PUCTL_I2CP,
+ PUCTL_PTA,
+ PUCTL_GPU7,
+ PUCTL_KBCA,
+ PUCTL_KBCB,
+ PUCTL_KBCC,
+ PUCTL_KBCD,
+
+ PUCTL_SPDI,
+ PUCTL_SPDO,
+ PUCTL_GPSLXAU,
+ PUCTL_CRTP,
+ PUCTL_SLXC,
+ PUCTL_SLXD,
+ PUCTL_SLXK,
+
+ /* 32: APB_MISC_PP_PULLUPDOWN_REG_C_0 */
+ PUCTL_CDEV1,
+ PUCTL_CDEV2,
+ PUCTL_SPIA,
+ PUCTL_SPIB,
+ PUCTL_SPIC,
+ PUCTL_SPID,
+ PUCTL_SPIE,
+ PUCTL_SPIF,
+
+ PUCTL_SPIG,
+ PUCTL_SPIH,
+ PUCTL_IRTX,
+ PUCTL_IRRX,
+ PUCTL_GME,
+ PUCTL_RESERVED45,
+ PUCTL_XM2D,
+ PUCTL_XM2C,
+
+ /* 48: APB_MISC_PP_PULLUPDOWN_REG_D_0 */
+ PUCTL_UAA,
+ PUCTL_UAB,
+ PUCTL_UAC,
+ PUCTL_UAD,
+ PUCTL_UCA,
+ PUCTL_UCB,
+ PUCTL_LD17,
+ PUCTL_LD19_18,
+
+ PUCTL_LD21_20,
+ PUCTL_LD23_22,
+ PUCTL_LS,
+ PUCTL_LC,
+ PUCTL_CSUS,
+ PUCTL_DDRC,
+ PUCTL_SDC,
+ PUCTL_SDD,
+
+ /* 64: APB_MISC_PP_PULLUPDOWN_REG_E_0 */
+ PUCTL_KBCF,
+ PUCTL_KBCE,
+ PUCTL_PMCA,
+ PUCTL_PMCB,
+ PUCTL_PMCC,
+ PUCTL_PMCD,
+ PUCTL_PMCE,
+ PUCTL_CK32,
+
+ PUCTL_UDA,
+ PUCTL_SDMMC1,
+ PUCTL_GMA,
+ PUCTL_GMB,
+ PUCTL_GMC,
+ PUCTL_GMD,
+ PUCTL_DDC,
+ PUCTL_OWC,
+
+ PUCTL_NONE = -1
+};
+
+struct tegra_pingroup_desc {
+ const char *name;
+ enum pmux_func funcs[4];
+ enum pmux_func func_safe;
+ enum pmux_vddio vddio;
+ enum pmux_ctlid ctl_id;
+ enum pmux_pullid pull_id;
+};
+
+
+/* Converts a pmux_pingrp number to a tristate register: 0=A, 1=B, 2=C, 3=D */
+#define TRISTATE_REG(pmux_pingrp) ((pmux_pingrp) >> 5)
+
+/* Mask value for a tristate (within TRISTATE_REG(id)) */
+#define TRISTATE_MASK(pmux_pingrp) (1 << ((pmux_pingrp) & 0x1f))
+
+/* Converts a PUCTL id to a pull register: 0=A, 1=B...4=E */
+#define PULL_REG(pmux_pullid) ((pmux_pullid) >> 4)
+
+/* Converts a PUCTL id to a shift position */
+#define PULL_SHIFT(pmux_pullid) ((pmux_pullid << 1) & 0x1f)
+
+/* Converts a MUXCTL id to a ctl register: 0=A, 1=B...6=G */
+#define MUXCTL_REG(pmux_ctlid) ((pmux_ctlid) >> 4)
+
+/* Converts a MUXCTL id to a shift position */
+#define MUXCTL_SHIFT(pmux_ctlid) ((pmux_ctlid << 1) & 0x1f)
+
+/* Convenient macro for defining pin group properties */
+#define PINALL(pg_name, vdd, f0, f1, f2, f3, f_safe, mux, pupd) \
+ { \
+ .vddio = PMUX_VDDIO_ ## vdd, \
+ .funcs = { \
+ PMUX_FUNC_ ## f0, \
+ PMUX_FUNC_ ## f1, \
+ PMUX_FUNC_ ## f2, \
+ PMUX_FUNC_ ## f3, \
+ }, \
+ .func_safe = PMUX_FUNC_ ## f_safe, \
+ .ctl_id = mux, \
+ .pull_id = pupd \
+ }
+
+/* A normal pin group where the mux name and pull-up name match */
+#define PIN(pg_name, vdd, f0, f1, f2, f3, f_safe) \
+ PINALL(pg_name, vdd, f0, f1, f2, f3, f_safe, \
+ MUXCTL_ ## pg_name, PUCTL_ ## pg_name)
+
+/* A pin group where the pull-up name doesn't have a 1-1 mapping */
+#define PINP(pg_name, vdd, f0, f1, f2, f3, f_safe, pupd) \
+ PINALL(pg_name, vdd, f0, f1, f2, f3, f_safe, \
+ MUXCTL_ ## pg_name, PUCTL_ ## pupd)
+
+/* A pin group number which is not used */
+#define PIN_RESERVED \
+ PIN(NONE, NONE, NONE, NONE, NONE, NONE, NONE)
+
+const struct tegra_pingroup_desc tegra_soc_pingroups[PINGRP_COUNT] = {
+ PIN(ATA, NAND, IDE, NAND, GMI, RSVD, IDE),
+ PIN(ATB, NAND, IDE, NAND, GMI, SDIO4, IDE),
+ PIN(ATC, NAND, IDE, NAND, GMI, SDIO4, IDE),
+ PIN(ATD, NAND, IDE, NAND, GMI, SDIO4, IDE),
+ PIN(CDEV1, AUDIO, OSC, PLLA_OUT, PLLM_OUT1, AUDIO_SYNC, OSC),
+ PIN(CDEV2, AUDIO, OSC, AHB_CLK, APB_CLK, PLLP_OUT4, OSC),
+ PIN(CSUS, VI, PLLC_OUT1, PLLP_OUT2, PLLP_OUT3, VI_SENSOR_CLK,
+ PLLC_OUT1),
+ PIN(DAP1, AUDIO, DAP1, RSVD, GMI, SDIO2, DAP1),
+
+ PIN(DAP2, AUDIO, DAP2, TWC, RSVD, GMI, DAP2),
+ PIN(DAP3, BB, DAP3, RSVD, RSVD, RSVD, DAP3),
+ PIN(DAP4, UART, DAP4, RSVD, GMI, RSVD, DAP4),
+ PIN(DTA, VI, RSVD, SDIO2, VI, RSVD, RSVD4),
+ PIN(DTB, VI, RSVD, RSVD, VI, SPI1, RSVD1),
+ PIN(DTC, VI, RSVD, RSVD, VI, RSVD, RSVD1),
+ PIN(DTD, VI, RSVD, SDIO2, VI, RSVD, RSVD1),
+ PIN(DTE, VI, RSVD, RSVD, VI, SPI1, RSVD1),
+
+ PINP(GPU, UART, PWM, UARTA, GMI, RSVD, RSVD4,
+ GPSLXAU),
+ PIN(GPV, SD, PCIE, RSVD, RSVD, RSVD, PCIE),
+ PIN(I2CP, SYS, I2C, RSVD, RSVD, RSVD, RSVD4),
+ PIN(IRTX, UART, UARTA, UARTB, GMI, SPI4, UARTB),
+ PIN(IRRX, UART, UARTA, UARTB, GMI, SPI4, UARTB),
+ PIN(KBCB, SYS, KBC, NAND, SDIO2, MIO, KBC),
+ PIN(KBCA, SYS, KBC, NAND, SDIO2, EMC_TEST0_DLL, KBC),
+ PINP(PMC, SYS, PWR_ON, PWR_INTR, RSVD, RSVD, PWR_ON, NONE),
+
+ PIN(PTA, NAND, I2C2, HDMI, GMI, RSVD, RSVD4),
+ PIN(RM, UART, I2C, RSVD, RSVD, RSVD, RSVD4),
+ PIN(KBCE, SYS, KBC, NAND, OWR, RSVD, KBC),
+ PIN(KBCF, SYS, KBC, NAND, TRACE, MIO, KBC),
+ PIN(GMA, NAND, UARTE, SPI3, GMI, SDIO4, SPI3),
+ PIN(GMC, NAND, UARTD, SPI4, GMI, SFLASH, SPI4),
+ PIN(SDMMC1, BB, SDIO1, RSVD, UARTE, UARTA, RSVD2),
+ PIN(OWC, SYS, OWR, RSVD, RSVD, RSVD, OWR),
+
+ PIN(GME, NAND, RSVD, DAP5, GMI, SDIO4, GMI),
+ PIN(SDC, SD, PWM, TWC, SDIO3, SPI3, TWC),
+ PIN(SDD, SD, UARTA, PWM, SDIO3, SPI3, PWM),
+ PIN_RESERVED,
+ PINP(SLXA, SD, PCIE, SPI4, SDIO3, SPI2, PCIE, CRTP),
+ PIN(SLXC, SD, SPDIF, SPI4, SDIO3, SPI2, SPI4),
+ PIN(SLXD, SD, SPDIF, SPI4, SDIO3, SPI2, SPI4),
+ PIN(SLXK, SD, PCIE, SPI4, SDIO3, SPI2, PCIE),
+
+ PIN(SPDI, AUDIO, SPDIF, RSVD, I2C, SDIO2, RSVD2),
+ PIN(SPDO, AUDIO, SPDIF, RSVD, I2C, SDIO2, RSVD2),
+ PIN(SPIA, AUDIO, SPI1, SPI2, SPI3, GMI, GMI),
+ PIN(SPIB, AUDIO, SPI1, SPI2, SPI3, GMI, GMI),
+ PIN(SPIC, AUDIO, SPI1, SPI2, SPI3, GMI, GMI),
+ PIN(SPID, AUDIO, SPI2, SPI1, SPI2_ALT, GMI, GMI),
+ PIN(SPIE, AUDIO, SPI2, SPI1, SPI2_ALT, GMI, GMI),
+ PIN(SPIF, AUDIO, SPI3, SPI1, SPI2, RSVD, RSVD4),
+
+ PIN(SPIG, AUDIO, SPI3, SPI2, SPI2_ALT, I2C, SPI2_ALT),
+ PIN(SPIH, AUDIO, SPI3, SPI2, SPI2_ALT, I2C, SPI2_ALT),
+ PIN(UAA, BB, SPI3, MIPI_HS, UARTA, ULPI, MIPI_HS),
+ PIN(UAB, BB, SPI2, MIPI_HS, UARTA, ULPI, MIPI_HS),
+ PIN(UAC, BB, OWR, RSVD, RSVD, RSVD, RSVD4),
+ PIN(UAD, UART, IRDA, SPDIF, UARTA, SPI4, SPDIF),
+ PIN(UCA, UART, UARTC, RSVD, GMI, RSVD, RSVD4),
+ PIN(UCB, UART, UARTC, PWM, GMI, RSVD, RSVD4),
+
+ PIN_RESERVED,
+ PIN(ATE, NAND, IDE, NAND, GMI, RSVD, IDE),
+ PIN(KBCC, SYS, KBC, NAND, TRACE, EMC_TEST1_DLL, KBC),
+ PIN_RESERVED,
+ PIN_RESERVED,
+ PIN(GMB, NAND, IDE, NAND, GMI, GMI_INT, GMI),
+ PIN(GMD, NAND, RSVD, NAND, GMI, SFLASH, GMI),
+ PIN(DDC, LCD, I2C2, RSVD, RSVD, RSVD, RSVD4),
+
+ /* 64 */
+ PINP(LD0, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD1, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD2, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD3, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD4, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD5, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD6, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD7, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+
+ PINP(LD8, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD9, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD10, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD11, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD12, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD13, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD14, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD15, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+
+ PINP(LD16, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LD17),
+ PINP(LD17, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD17),
+ PINP(LHP0, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD21_20),
+ PINP(LHP1, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD19_18),
+ PINP(LHP2, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD19_18),
+ PINP(LVP0, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LC),
+ PINP(LVP1, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD21_20),
+ PINP(HDINT, LCD, HDMI, RSVD, RSVD, RSVD, HDMI , LC),
+
+ PINP(LM0, LCD, DISPA, DISPB, SPI3, RSVD, RSVD4, LC),
+ PINP(LM1, LCD, DISPA, DISPB, RSVD, CRT, RSVD3, LC),
+ PINP(LVS, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LC),
+ PINP(LSC0, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LC),
+ PINP(LSC1, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
+ PINP(LSCK, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
+ PINP(LDC, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LS),
+ PINP(LCSN, LCD, DISPA, DISPB, SPI3, RSVD, RSVD4, LS),
+
+ /* 96 */
+ PINP(LSPI, LCD, DISPA, DISPB, XIO, HDMI, DISPA, LC),
+ PINP(LSDA, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
+ PINP(LSDI, LCD, DISPA, DISPB, SPI3, RSVD, DISPA, LS),
+ PINP(LPW0, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
+ PINP(LPW1, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LS),
+ PINP(LPW2, LCD, DISPA, DISPB, SPI3, HDMI, DISPA, LS),
+ PINP(LDI, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD23_22),
+ PINP(LHS, LCD, DISPA, DISPB, XIO, RSVD, RSVD4, LC),
+
+ PINP(LPP, LCD, DISPA, DISPB, RSVD, RSVD, RSVD4, LD23_22),
+ PIN_RESERVED,
+ PIN(KBCD, SYS, KBC, NAND, SDIO2, MIO, KBC),
+ PIN(GPU7, SYS, RTCK, RSVD, RSVD, RSVD, RTCK),
+ PIN(DTF, VI, I2C3, RSVD, VI, RSVD, RSVD4),
+ PIN(UDA, BB, SPI1, RSVD, UARTD, ULPI, RSVD2),
+ PIN(CRTP, LCD, CRT, RSVD, RSVD, RSVD, RSVD),
+ PINP(SDB, SD, UARTA, PWM, SDIO3, SPI2, PWM, NONE),
+
+ /* these pin groups only have pullup and pull down control */
+ PINALL(CK32, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(DDRC, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(PMCA, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(PMCB, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(PMCC, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(PMCD, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(PMCE, SYS, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(XM2C, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+ PINALL(XM2D, DDR, RSVD, RSVD, RSVD, RSVD, RSVD, MUXCTL_NONE,
+ PUCTL_NONE),
+};
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *tri = &pmt->pmt_tri[TRISTATE_REG(pin)];
+ u32 reg;
+
+ reg = readl(tri);
+ if (enable)
+ reg |= TRISTATE_MASK(pin);
+ else
+ reg &= ~TRISTATE_MASK(pin);
+ writel(reg, tri);
+}
+
+void pinmux_tristate_enable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 1);
+}
+
+void pinmux_tristate_disable(enum pmux_pingrp pin)
+{
+ pinmux_set_tristate(pin, 0);
+}
+
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ enum pmux_pullid pull_id = tegra_soc_pingroups[pin].pull_id;
+ u32 *pull = &pmt->pmt_pull[PULL_REG(pull_id)];
+ u32 mask_bit;
+ u32 reg;
+ mask_bit = PULL_SHIFT(pull_id);
+
+ reg = readl(pull);
+ reg &= ~(0x3 << mask_bit);
+ reg |= pupd << mask_bit;
+ writel(reg, pull);
+}
+
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func)
+{
+ struct pmux_tri_ctlr *pmt =
+ (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ enum pmux_ctlid mux_id = tegra_soc_pingroups[pin].ctl_id;
+ u32 *muxctl = &pmt->pmt_ctl[MUXCTL_REG(mux_id)];
+ u32 mask_bit;
+ int i, mux = -1;
+ u32 reg;
+
+ assert(pmux_func_isvalid(func));
+
+ /* Handle special values */
+ if (func >= PMUX_FUNC_RSVD1) {
+ mux = (func - PMUX_FUNC_RSVD1) & 0x3;
+ } else {
+ /* Search for the appropriate function */
+ for (i = 0; i < 4; i++) {
+ if (tegra_soc_pingroups[pin].funcs[i] == func) {
+ mux = i;
+ break;
+ }
+ }
+ }
+ assert(mux != -1);
+
+ mask_bit = MUXCTL_SHIFT(mux_id);
+ reg = readl(muxctl);
+ reg &= ~(0x3 << mask_bit);
+ reg |= mux << mask_bit;
+ writel(reg, muxctl);
+}
+
+void pinmux_config_pingroup(struct pingroup_config *config)
+{
+ enum pmux_pingrp pin = config->pingroup;
+
+ pinmux_set_func(pin, config->func);
+ pinmux_set_pullupdown(pin, config->pull);
+ pinmux_set_tristate(pin, config->tristate);
+}
+
+void pinmux_config_table(struct pingroup_config *config, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ pinmux_config_pingroup(&config[i]);
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <tps6586x.h>
+#include <asm/io.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/tegra_i2c.h>
+#include <asm/arch/sys_proto.h>
+
+#define VDD_CORE_NOMINAL_T25 0x17 /* 1.3v */
+#define VDD_CPU_NOMINAL_T25 0x10 /* 1.125v */
+
+#define VDD_CORE_NOMINAL_T20 0x16 /* 1.275v */
+#define VDD_CPU_NOMINAL_T20 0x0f /* 1.1v */
+
+#define VDD_RELATION 0x02 /* 50mv */
+#define VDD_TRANSITION_STEP 0x06 /* 150mv */
+#define VDD_TRANSITION_RATE 0x06 /* 3.52mv/us */
+
+int pmu_set_nominal(void)
+{
+ int core, cpu, bus;
+
+ /* by default, the table has been filled with T25 settings */
+ switch (tegra_get_chip_type()) {
+ case TEGRA_SOC_T20:
+ core = VDD_CORE_NOMINAL_T20;
+ cpu = VDD_CPU_NOMINAL_T20;
+ break;
+ case TEGRA_SOC_T25:
+ core = VDD_CORE_NOMINAL_T25;
+ cpu = VDD_CPU_NOMINAL_T25;
+ break;
+ default:
+ debug("%s: Unknown chip type\n", __func__);
+ return -1;
+ }
+
+ bus = tegra_i2c_get_dvc_bus_num();
+ if (bus == -1) {
+ debug("%s: Cannot find DVC I2C bus\n", __func__);
+ return -1;
+ }
+ tps6586x_init(bus);
+ tps6586x_set_pwm_mode(TPS6586X_PWM_SM1);
+ return tps6586x_adjust_sm0_sm1(core, cpu, VDD_TRANSITION_STEP,
+ VDD_TRANSITION_RATE, VDD_RELATION);
+}
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+/* Print CPU information */
+int print_cpuinfo(void)
+{
+ puts("TEGRA20\n");
+
+ /* TBD: Add printf of major/minor rev info, stepping, etc. */
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * (C) Copyright 2008
+ * Texas Instruments
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Moahmmed Khasim <khasim@ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* counter runs at 1MHz */
+#define TIMER_CLK 1000000
+#define TIMER_LOAD_VAL 0xffffffff
+
+/* timer without interrupts */
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/* delay x useconds */
+void __udelay(unsigned long usec)
+{
+ long tmo = usec * (TIMER_CLK / 1000) / 1000;
+ unsigned long now, last = timer_get_us();
+
+ while (tmo > 0) {
+ now = timer_get_us();
+ if (last > now) /* count up timer overflow */
+ tmo -= TIMER_LOAD_VAL - last + now;
+ else
+ tmo -= now - last;
+ last = now;
+ }
+}
+
+ulong get_timer_masked(void)
+{
+ ulong now;
+
+ /* current tick value */
+ now = timer_get_us() / (TIMER_CLK / CONFIG_SYS_HZ);
+
+ if (now >= gd->lastinc) /* normal mode (non roll) */
+ /* move stamp forward with absolute diff ticks */
+ gd->tbl += (now - gd->lastinc);
+ else /* we have rollover of incrementer */
+ gd->tbl += ((TIMER_LOAD_VAL / (TIMER_CLK / CONFIG_SYS_HZ))
+ - gd->lastinc) + now;
+ gd->lastinc = now;
+ return gd->tbl;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
+
+unsigned long timer_get_us(void)
+{
+ struct timerus *timer_base = (struct timerus *)NV_PA_TMRUS_BASE;
+
+ return readl(&timer_base->cntr_1us);
+}
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/uart.h>
+#include <asm/arch/usb.h>
+#include <libfdt.h>
+#include <fdtdec.h>
+
+enum {
+ USB_PORTS_MAX = 4, /* Maximum ports we allow */
+};
+
+/* Parameters we need for USB */
+enum {
+ PARAM_DIVN, /* PLL FEEDBACK DIVIDer */
+ PARAM_DIVM, /* PLL INPUT DIVIDER */
+ PARAM_DIVP, /* POST DIVIDER (2^N) */
+ PARAM_CPCON, /* BASE PLLC CHARGE Pump setup ctrl */
+ PARAM_LFCON, /* BASE PLLC LOOP FILter setup ctrl */
+ PARAM_ENABLE_DELAY_COUNT, /* PLL-U Enable Delay Count */
+ PARAM_STABLE_COUNT, /* PLL-U STABLE count */
+ PARAM_ACTIVE_DELAY_COUNT, /* PLL-U Active delay count */
+ PARAM_XTAL_FREQ_COUNT, /* PLL-U XTAL frequency count */
+ PARAM_DEBOUNCE_A_TIME, /* 10MS DELAY for BIAS_DEBOUNCE_A */
+ PARAM_BIAS_TIME, /* 20US DELAY AFter bias cell op */
+
+ PARAM_COUNT
+};
+
+/* Possible port types (dual role mode) */
+enum dr_mode {
+ DR_MODE_NONE = 0,
+ DR_MODE_HOST, /* supports host operation */
+ DR_MODE_DEVICE, /* supports device operation */
+ DR_MODE_OTG, /* supports both */
+};
+
+/* Information about a USB port */
+struct fdt_usb {
+ struct usb_ctlr *reg; /* address of registers in physical memory */
+ unsigned utmi:1; /* 1 if port has external tranceiver, else 0 */
+ unsigned enabled:1; /* 1 to enable, 0 to disable */
+ unsigned has_legacy_mode:1; /* 1 if this port has legacy mode */
+ enum dr_mode dr_mode; /* dual role mode */
+ enum periph_id periph_id;/* peripheral id */
+ struct fdt_gpio_state vbus_gpio; /* GPIO for vbus enable */
+};
+
+static struct fdt_usb port[USB_PORTS_MAX]; /* List of valid USB ports */
+static unsigned port_count; /* Number of available ports */
+static int port_current; /* Current port (-1 = none) */
+
+/*
+ * This table has USB timing parameters for each Oscillator frequency we
+ * support. There are four sets of values:
+ *
+ * 1. PLLU configuration information (reference clock is osc/clk_m and
+ * PLLU-FOs are fixed at 12MHz/60MHz/480MHz).
+ *
+ * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
+ * ----------------------------------------------------------------------
+ * DIVN 960 (0x3c0) 200 (0c8) 960 (3c0h) 960 (3c0)
+ * DIVM 13 (0d) 4 (04) 12 (0c) 26 (1a)
+ * Filter frequency (MHz) 1 4.8 6 2
+ * CPCON 1100b 0011b 1100b 1100b
+ * LFCON0 0 0 0 0
+ *
+ * 2. PLL CONFIGURATION & PARAMETERS for different clock generators:
+ *
+ * Reference frequency 13.0MHz 19.2MHz 12.0MHz 26.0MHz
+ * ---------------------------------------------------------------------------
+ * PLLU_ENABLE_DLY_COUNT 02 (0x02) 03 (03) 02 (02) 04 (04)
+ * PLLU_STABLE_COUNT 51 (33) 75 (4B) 47 (2F) 102 (66)
+ * PLL_ACTIVE_DLY_COUNT 05 (05) 06 (06) 04 (04) 09 (09)
+ * XTAL_FREQ_COUNT 127 (7F) 187 (BB) 118 (76) 254 (FE)
+ *
+ * 3. Debounce values IdDig, Avalid, Bvalid, VbusValid, VbusWakeUp, and
+ * SessEnd. Each of these signals have their own debouncer and for each of
+ * those one out of two debouncing times can be chosen (BIAS_DEBOUNCE_A or
+ * BIAS_DEBOUNCE_B).
+ *
+ * The values of DEBOUNCE_A and DEBOUNCE_B are calculated as follows:
+ * 0xffff -> No debouncing at all
+ * <n> ms = <n> *1000 / (1/19.2MHz) / 4
+ *
+ * So to program a 1 ms debounce for BIAS_DEBOUNCE_A, we have:
+ * BIAS_DEBOUNCE_A[15:0] = 1000 * 19.2 / 4 = 4800 = 0x12c0
+ *
+ * We need to use only DebounceA for BOOTROM. We don't need the DebounceB
+ * values, so we can keep those to default.
+ *
+ * 4. The 20 microsecond delay after bias cell operation.
+ */
+static const unsigned usb_pll[CLOCK_OSC_FREQ_COUNT][PARAM_COUNT] = {
+ /* DivN, DivM, DivP, CPCON, LFCON, Delays Debounce, Bias */
+ { 0x3C0, 0x0D, 0x00, 0xC, 0, 0x02, 0x33, 0x05, 0x7F, 0x7EF4, 5 },
+ { 0x0C8, 0x04, 0x00, 0x3, 0, 0x03, 0x4B, 0x06, 0xBB, 0xBB80, 7 },
+ { 0x3C0, 0x0C, 0x00, 0xC, 0, 0x02, 0x2F, 0x04, 0x76, 0x7530, 5 },
+ { 0x3C0, 0x1A, 0x00, 0xC, 0, 0x04, 0x66, 0x09, 0xFE, 0xFDE8, 9 }
+};
+
+/* UTMIP Idle Wait Delay */
+static const u8 utmip_idle_wait_delay = 17;
+
+/* UTMIP Elastic limit */
+static const u8 utmip_elastic_limit = 16;
+
+/* UTMIP High Speed Sync Start Delay */
+static const u8 utmip_hs_sync_start_delay = 9;
+
+/* Put the port into host mode (this only works for OTG ports) */
+static void set_host_mode(struct fdt_usb *config)
+{
+ if (config->dr_mode == DR_MODE_OTG) {
+ /* Check whether remote host from USB1 is driving VBus */
+ if (readl(&config->reg->phy_vbus_sensors) & VBUS_VLD_STS)
+ return;
+
+ /*
+ * If not driving, we set the GPIO to enable VBUS. We assume
+ * that the pinmux is set up correctly for this.
+ */
+ if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ fdtdec_setup_gpio(&config->vbus_gpio);
+ gpio_direction_output(config->vbus_gpio.gpio, 1);
+ debug("set_host_mode: GPIO %d high\n",
+ config->vbus_gpio.gpio);
+ }
+ }
+}
+
+void usbf_reset_controller(struct fdt_usb *config, struct usb_ctlr *usbctlr)
+{
+ /* Reset the USB controller with 2us delay */
+ reset_periph(config->periph_id, 2);
+
+ /*
+ * Set USB1_NO_LEGACY_MODE to 1, Registers are accessible under
+ * base address
+ */
+ if (config->has_legacy_mode)
+ setbits_le32(&usbctlr->usb1_legacy_ctrl, USB1_NO_LEGACY_MODE);
+
+ /* Put UTMIP1/3 in reset */
+ setbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+ /* Enable the UTMIP PHY */
+ if (config->utmi)
+ setbits_le32(&usbctlr->susp_ctrl, UTMIP_PHY_ENB);
+
+ /*
+ * TODO: where do we take the USB1 out of reset? The old code would
+ * take USB3 out of reset, but not USB1. This code doesn't do either.
+ */
+}
+
+/* set up the USB controller with the parameters provided */
+static int init_usb_controller(struct fdt_usb *config,
+ struct usb_ctlr *usbctlr, const u32 timing[])
+{
+ u32 val;
+ int loop_count;
+
+ clock_enable(config->periph_id);
+
+ /* Reset the usb controller */
+ usbf_reset_controller(config, usbctlr);
+
+ /* Stop crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN low */
+ clrbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+ /* Follow the crystal clock disable by >100ns delay */
+ udelay(1);
+
+ /*
+ * To Use the A Session Valid for cable detection logic, VBUS_WAKEUP
+ * mux must be switched to actually use a_sess_vld threshold.
+ */
+ if (fdt_gpio_isvalid(&config->vbus_gpio)) {
+ clrsetbits_le32(&usbctlr->usb1_legacy_ctrl,
+ VBUS_SENSE_CTL_MASK,
+ VBUS_SENSE_CTL_A_SESS_VLD << VBUS_SENSE_CTL_SHIFT);
+ }
+
+ /*
+ * PLL Delay CONFIGURATION settings. The following parameters control
+ * the bring up of the plls.
+ */
+ val = readl(&usbctlr->utmip_misc_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_STABLE_COUNT_MASK,
+ timing[PARAM_STABLE_COUNT] << UTMIP_PLLU_STABLE_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_PLL_ACTIVE_DLY_COUNT_MASK,
+ timing[PARAM_ACTIVE_DELAY_COUNT] <<
+ UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_misc_cfg1);
+
+ /* Set PLL enable delay count and crystal frequency count */
+ val = readl(&usbctlr->utmip_pll_cfg1);
+ clrsetbits_le32(&val, UTMIP_PLLU_ENABLE_DLY_COUNT_MASK,
+ timing[PARAM_ENABLE_DELAY_COUNT] <<
+ UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_XTAL_FREQ_COUNT_MASK,
+ timing[PARAM_XTAL_FREQ_COUNT] <<
+ UTMIP_XTAL_FREQ_COUNT_SHIFT);
+ writel(val, &usbctlr->utmip_pll_cfg1);
+
+ /* Setting the tracking length time */
+ clrsetbits_le32(&usbctlr->utmip_bias_cfg1,
+ UTMIP_BIAS_PDTRK_COUNT_MASK,
+ timing[PARAM_BIAS_TIME] << UTMIP_BIAS_PDTRK_COUNT_SHIFT);
+
+ /* Program debounce time for VBUS to become valid */
+ clrsetbits_le32(&usbctlr->utmip_debounce_cfg0,
+ UTMIP_DEBOUNCE_CFG0_MASK,
+ timing[PARAM_DEBOUNCE_A_TIME] << UTMIP_DEBOUNCE_CFG0_SHIFT);
+
+ setbits_le32(&usbctlr->utmip_tx_cfg0, UTMIP_FS_PREAMBLE_J);
+
+ /* Disable battery charge enabling bit */
+ setbits_le32(&usbctlr->utmip_bat_chrg_cfg0, UTMIP_PD_CHRG);
+
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_XCVR_LSBIAS_SE);
+ setbits_le32(&usbctlr->utmip_spare_cfg0, FUSE_SETUP_SEL);
+
+ /*
+ * Configure the UTMIP_IDLE_WAIT and UTMIP_ELASTIC_LIMIT
+ * Setting these fields, together with default values of the
+ * other fields, results in programming the registers below as
+ * follows:
+ * UTMIP_HSRX_CFG0 = 0x9168c000
+ * UTMIP_HSRX_CFG1 = 0x13
+ */
+
+ /* Set PLL enable delay count and Crystal frequency count */
+ val = readl(&usbctlr->utmip_hsrx_cfg0);
+ clrsetbits_le32(&val, UTMIP_IDLE_WAIT_MASK,
+ utmip_idle_wait_delay << UTMIP_IDLE_WAIT_SHIFT);
+ clrsetbits_le32(&val, UTMIP_ELASTIC_LIMIT_MASK,
+ utmip_elastic_limit << UTMIP_ELASTIC_LIMIT_SHIFT);
+ writel(val, &usbctlr->utmip_hsrx_cfg0);
+
+ /* Configure the UTMIP_HS_SYNC_START_DLY */
+ clrsetbits_le32(&usbctlr->utmip_hsrx_cfg1,
+ UTMIP_HS_SYNC_START_DLY_MASK,
+ utmip_hs_sync_start_delay << UTMIP_HS_SYNC_START_DLY_SHIFT);
+
+ /* Preceed the crystal clock disable by >100ns delay. */
+ udelay(1);
+
+ /* Resuscitate crystal clock by setting UTMIP_PHY_XTAL_CLOCKEN */
+ setbits_le32(&usbctlr->utmip_misc_cfg1, UTMIP_PHY_XTAL_CLOCKEN);
+
+ /* Finished the per-controller init. */
+
+ /* De-assert UTMIP_RESET to bring out of reset. */
+ clrbits_le32(&usbctlr->susp_ctrl, UTMIP_RESET);
+
+ /* Wait for the phy clock to become valid in 100 ms */
+ for (loop_count = 100000; loop_count != 0; loop_count--) {
+ if (readl(&usbctlr->susp_ctrl) & USB_PHY_CLK_VALID)
+ break;
+ udelay(1);
+ }
+ if (!loop_count)
+ return -1;
+
+ return 0;
+}
+
+static void power_up_port(struct usb_ctlr *usbctlr)
+{
+ /* Deassert power down state */
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg0, UTMIP_FORCE_PD_POWERDOWN |
+ UTMIP_FORCE_PD2_POWERDOWN | UTMIP_FORCE_PDZI_POWERDOWN);
+ clrbits_le32(&usbctlr->utmip_xcvr_cfg1, UTMIP_FORCE_PDDISC_POWERDOWN |
+ UTMIP_FORCE_PDCHRP_POWERDOWN | UTMIP_FORCE_PDDR_POWERDOWN);
+}
+
+static void config_clock(const u32 timing[])
+{
+ clock_start_pll(CLOCK_ID_USB,
+ timing[PARAM_DIVM], timing[PARAM_DIVN], timing[PARAM_DIVP],
+ timing[PARAM_CPCON], timing[PARAM_LFCON]);
+}
+
+/**
+ * Add a new USB port to the list of available ports.
+ *
+ * @param config USB port configuration
+ * @return 0 if ok, -1 if error (too many ports)
+ */
+static int add_port(struct fdt_usb *config, const u32 timing[])
+{
+ struct usb_ctlr *usbctlr = config->reg;
+
+ if (port_count == USB_PORTS_MAX) {
+ debug("tegrausb: Cannot register more than %d ports\n",
+ USB_PORTS_MAX);
+ return -1;
+ }
+ if (init_usb_controller(config, usbctlr, timing)) {
+ debug("tegrausb: Cannot init port\n");
+ return -1;
+ }
+ if (config->utmi) {
+ /* Disable ICUSB FS/LS transceiver */
+ clrbits_le32(&usbctlr->icusb_ctrl, IC_ENB1);
+
+ /* Select UTMI parallel interface */
+ clrsetbits_le32(&usbctlr->port_sc1, PTS_MASK,
+ PTS_UTMI << PTS_SHIFT);
+ clrbits_le32(&usbctlr->port_sc1, STS);
+ power_up_port(usbctlr);
+ }
+ port[port_count++] = *config;
+
+ return 0;
+}
+
+int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor)
+{
+ struct usb_ctlr *usbctlr;
+
+ if (portnum >= port_count)
+ return -1;
+ tegrausb_stop_port();
+ set_host_mode(&port[portnum]);
+
+ usbctlr = port[portnum].reg;
+ *hccr = (u32)&usbctlr->cap_length;
+ *hcor = (u32)&usbctlr->usb_cmd;
+ port_current = portnum;
+ return 0;
+}
+
+int tegrausb_stop_port(void)
+{
+ struct usb_ctlr *usbctlr;
+
+ if (port_current == -1)
+ return -1;
+
+ usbctlr = port[port_current].reg;
+
+ /* Stop controller */
+ writel(0, &usbctlr->usb_cmd);
+ udelay(1000);
+
+ /* Initiate controller reset */
+ writel(2, &usbctlr->usb_cmd);
+ udelay(1000);
+ port_current = -1;
+ return 0;
+}
+
+int fdt_decode_usb(const void *blob, int node, unsigned osc_frequency_mhz,
+ struct fdt_usb *config)
+{
+ const char *phy, *mode;
+
+ config->reg = (struct usb_ctlr *)fdtdec_get_addr(blob, node, "reg");
+ mode = fdt_getprop(blob, node, "dr_mode", NULL);
+ if (mode) {
+ if (0 == strcmp(mode, "host"))
+ config->dr_mode = DR_MODE_HOST;
+ else if (0 == strcmp(mode, "peripheral"))
+ config->dr_mode = DR_MODE_DEVICE;
+ else if (0 == strcmp(mode, "otg"))
+ config->dr_mode = DR_MODE_OTG;
+ else {
+ debug("%s: Cannot decode dr_mode '%s'\n", __func__,
+ mode);
+ return -FDT_ERR_NOTFOUND;
+ }
+ } else {
+ config->dr_mode = DR_MODE_HOST;
+ }
+
+ phy = fdt_getprop(blob, node, "phy_type", NULL);
+ config->utmi = phy && 0 == strcmp("utmi", phy);
+ config->enabled = fdtdec_get_is_enabled(blob, node);
+ config->has_legacy_mode = fdtdec_get_bool(blob, node,
+ "nvidia,has-legacy-mode");
+ config->periph_id = clock_decode_periph_id(blob, node);
+ if (config->periph_id == PERIPH_ID_NONE) {
+ debug("%s: Missing/invalid peripheral ID\n", __func__);
+ return -FDT_ERR_NOTFOUND;
+ }
+ fdtdec_decode_gpio(blob, node, "nvidia,vbus-gpio", &config->vbus_gpio);
+ debug("enabled=%d, legacy_mode=%d, utmi=%d, periph_id=%d, vbus=%d, "
+ "dr_mode=%d\n", config->enabled, config->has_legacy_mode,
+ config->utmi, config->periph_id, config->vbus_gpio.gpio,
+ config->dr_mode);
+
+ return 0;
+}
+
+int board_usb_init(const void *blob)
+{
+ struct fdt_usb config;
+ unsigned osc_freq = clock_get_rate(CLOCK_ID_OSC);
+ enum clock_osc_freq freq;
+ int node_list[USB_PORTS_MAX];
+ int node, count, i;
+
+ /* Set up the USB clocks correctly based on our oscillator frequency */
+ freq = clock_get_osc_freq();
+ config_clock(usb_pll[freq]);
+
+ /* count may return <0 on error */
+ count = fdtdec_find_aliases_for_id(blob, "usb",
+ COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
+ for (i = 0; i < count; i++) {
+ debug("USB %d: ", i);
+ node = node_list[i];
+ if (!node)
+ continue;
+ if (fdt_decode_usb(blob, node, osc_freq, &config)) {
+ debug("Cannot decode USB node %s\n",
+ fdt_get_name(blob, node, NULL));
+ return -1;
+ }
+
+ if (add_port(&config, usb_pll[freq]))
+ return -1;
+ set_host_mode(&config);
+ }
+ port_current = -1;
+
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2010 - 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/fuse.h>
+#include <asm/arch/emc.h>
+#include <asm/arch/gp_padctrl.h>
+#include <asm/arch/warmboot.h>
+#include <asm/arch/sdram_param.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_TEGRA_CLOCK_SCALING
+#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA20_LP0"
+#endif
+
+/*
+ * This is the place in SRAM where the SDRAM parameters are stored. There
+ * are 4 blocks, one for each RAM code
+ */
+#define SDRAM_PARAMS_BASE (AP20_BASE_PA_SRAM + 0x188)
+
+/* TODO: If we later add support for the Misc GP controller, refactor this */
+union xm2cfga_reg {
+ struct {
+ u32 reserved0:2;
+ u32 hsm_en:1;
+ u32 reserved1:2;
+ u32 preemp_en:1;
+ u32 vref_en:1;
+ u32 reserved2:5;
+ u32 cal_drvdn:5;
+ u32 reserved3:3;
+ u32 cal_drvup:5;
+ u32 reserved4:3;
+ u32 cal_drvdn_slwr:2;
+ u32 cal_drvup_slwf:2;
+ };
+ u32 word;
+};
+
+union xm2cfgd_reg {
+ struct {
+ u32 reserved0:2;
+ u32 hsm_en:1;
+ u32 schmt_en:1;
+ u32 lpmd:2;
+ u32 vref_en:1;
+ u32 reserved1:5;
+ u32 cal_drvdn:5;
+ u32 reserved2:3;
+ u32 cal_drvup:5;
+ u32 reserved3:3;
+ u32 cal_drvdn_slwr:2;
+ u32 cal_drvup_slwf:2;
+ };
+ u32 word;
+};
+
+/*
+ * TODO: This register is not documented in the TRM yet. We could move this
+ * into the EMC and give it a proper interface, but not while it is
+ * undocumented.
+ */
+union fbio_spare_reg {
+ struct {
+ u32 reserved:24;
+ u32 cfg_wb0:8;
+ };
+ u32 word;
+};
+
+/* We pack the resume information into these unions for later */
+union scratch2_reg {
+ struct {
+ u32 pllm_base_divm:5;
+ u32 pllm_base_divn:10;
+ u32 pllm_base_divp:3;
+ u32 pllm_misc_lfcon:4;
+ u32 pllm_misc_cpcon:4;
+ u32 gp_xm2cfga_padctrl_preemp:1;
+ u32 gp_xm2cfgd_padctrl_schmt:1;
+ u32 osc_ctrl_xobp:1;
+ u32 memory_type:3;
+ };
+ u32 word;
+};
+
+union scratch4_reg {
+ struct {
+ u32 emc_clock_divider:8;
+ u32 pllm_stable_time:8;
+ u32 pllx_stable_time:8;
+ u32 emc_fbio_spare_cfg_wb0:8;
+ };
+ u32 word;
+};
+
+union scratch24_reg {
+ struct {
+ u32 emc_auto_cal_wait:8;
+ u32 emc_pin_program_wait:8;
+ u32 warmboot_wait:8;
+ u32 reserved:8;
+ };
+ u32 word;
+};
+
+int warmboot_save_sdram_params(void)
+{
+ u32 ram_code;
+ struct sdram_params sdram;
+ struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct apb_misc_gp_ctlr *gp =
+ (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+ struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob);
+ union scratch2_reg scratch2;
+ union scratch4_reg scratch4;
+ union scratch24_reg scratch24;
+ union xm2cfga_reg xm2cfga;
+ union xm2cfgd_reg xm2cfgd;
+ union fbio_spare_reg fbio_spare;
+
+ /* get ram code that is used as index to array sdram_params in BCT */
+ ram_code = (readl(&pmt->pmt_strap_opt_a) >>
+ STRAP_OPT_A_RAM_CODE_SHIFT) & 3;
+ memcpy(&sdram,
+ (char *)((struct sdram_params *)SDRAM_PARAMS_BASE + ram_code),
+ sizeof(sdram));
+
+ xm2cfga.word = readl(&gp->xm2cfga);
+ xm2cfgd.word = readl(&gp->xm2cfgd);
+
+ scratch2.word = 0;
+ scratch2.osc_ctrl_xobp = clock_get_osc_bypass();
+
+ /* Get the memory PLL settings */
+ {
+ u32 divm, divn, divp, cpcon, lfcon;
+
+ if (clock_ll_read_pll(CLOCK_ID_MEMORY, &divm, &divn, &divp,
+ &cpcon, &lfcon))
+ return -1;
+ scratch2.pllm_base_divm = divm;
+ scratch2.pllm_base_divn = divn;
+ scratch2.pllm_base_divp = divp;
+ scratch2.pllm_misc_cpcon = cpcon;
+ scratch2.pllm_misc_lfcon = lfcon;
+ }
+
+ scratch2.gp_xm2cfga_padctrl_preemp = xm2cfga.preemp_en;
+ scratch2.gp_xm2cfgd_padctrl_schmt = xm2cfgd.schmt_en;
+ scratch2.memory_type = sdram.memory_type;
+ writel(scratch2.word, &pmc->pmc_scratch2);
+
+ /* collect data from various sources for pmc_scratch4 */
+ fbio_spare.word = readl(&emc->fbio_spare);
+ scratch4.word = 0;
+ scratch4.emc_fbio_spare_cfg_wb0 = fbio_spare.cfg_wb0;
+ scratch4.emc_clock_divider = sdram.emc_clock_divider;
+ scratch4.pllm_stable_time = -1;
+ scratch4.pllx_stable_time = -1;
+ writel(scratch4.word, &pmc->pmc_scratch4);
+
+ /* collect various data from sdram for pmc_scratch24 */
+ scratch24.word = 0;
+ scratch24.emc_pin_program_wait = sdram.emc_pin_program_wait;
+ scratch24.emc_auto_cal_wait = sdram.emc_auto_cal_wait;
+ scratch24.warmboot_wait = sdram.warm_boot_wait;
+ writel(scratch24.word, &pmc->pmc_scratch24);
+
+ return 0;
+}
+
+static u32 get_major_version(void)
+{
+ u32 major_id;
+ struct apb_misc_gp_ctlr *gp =
+ (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+
+ major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >>
+ HIDREV_MAJORPREV_SHIFT;
+ return major_id;
+}
+
+static int is_production_mode_fuse_set(struct fuse_regs *fuse)
+{
+ return readl(&fuse->production_mode);
+}
+
+static int is_odm_production_mode_fuse_set(struct fuse_regs *fuse)
+{
+ return readl(&fuse->security_mode);
+}
+
+static int is_failure_analysis_mode(struct fuse_regs *fuse)
+{
+ return readl(&fuse->fa);
+}
+
+static int ap20_is_odm_production_mode(void)
+{
+ struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+
+ if (!is_failure_analysis_mode(fuse) &&
+ is_odm_production_mode_fuse_set(fuse))
+ return 1;
+ else
+ return 0;
+}
+
+static int ap20_is_production_mode(void)
+{
+ struct fuse_regs *fuse = (struct fuse_regs *)TEGRA20_FUSE_BASE;
+
+ if (get_major_version() == 0)
+ return 1;
+
+ if (!is_failure_analysis_mode(fuse) &&
+ is_production_mode_fuse_set(fuse) &&
+ !is_odm_production_mode_fuse_set(fuse))
+ return 1;
+ else
+ return 0;
+}
+
+static enum fuse_operating_mode fuse_get_operation_mode(void)
+{
+ u32 chip_id;
+ struct apb_misc_gp_ctlr *gp =
+ (struct apb_misc_gp_ctlr *)TEGRA20_APB_MISC_GP_BASE;
+
+ chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >>
+ HIDREV_CHIPID_SHIFT;
+ if (chip_id == CHIPID_TEGRA20) {
+ if (ap20_is_odm_production_mode()) {
+ printf("!! odm_production_mode is not supported !!\n");
+ return MODE_UNDEFINED;
+ } else
+ if (ap20_is_production_mode())
+ return MODE_PRODUCTION;
+ else
+ return MODE_UNDEFINED;
+ }
+ return MODE_UNDEFINED;
+}
+
+static void determine_crypto_options(int *is_encrypted, int *is_signed,
+ int *use_zero_key)
+{
+ switch (fuse_get_operation_mode()) {
+ case MODE_PRODUCTION:
+ *is_encrypted = 0;
+ *is_signed = 1;
+ *use_zero_key = 1;
+ break;
+ case MODE_UNDEFINED:
+ default:
+ *is_encrypted = 0;
+ *is_signed = 0;
+ *use_zero_key = 0;
+ break;
+ }
+}
+
+static int sign_wb_code(u32 start, u32 length, int use_zero_key)
+{
+ int err;
+ u8 *source; /* Pointer to source */
+ u8 *hash;
+
+ /* Calculate AES block parameters. */
+ source = (u8 *)(start + offsetof(struct wb_header, random_aes_block));
+ length -= offsetof(struct wb_header, random_aes_block);
+ hash = (u8 *)(start + offsetof(struct wb_header, hash));
+ err = sign_data_block(source, length, hash);
+
+ return err;
+}
+
+int warmboot_prepare_code(u32 seg_address, u32 seg_length)
+{
+ int err = 0;
+ u32 length; /* length of the signed/encrypt code */
+ struct wb_header *dst_header; /* Pointer to dest WB header */
+ int is_encrypted; /* Segment is encrypted */
+ int is_signed; /* Segment is signed */
+ int use_zero_key; /* Use key of all zeros */
+
+ /* Determine crypto options. */
+ determine_crypto_options(&is_encrypted, &is_signed, &use_zero_key);
+
+ /* Get the actual code limits. */
+ length = roundup(((u32)wb_end - (u32)wb_start), 16);
+
+ /*
+ * The region specified by seg_address must be in SDRAM and must be
+ * nonzero in length.
+ */
+ if (seg_length == 0 || seg_address < NV_PA_SDRAM_BASE ||
+ seg_address + seg_length >= NV_PA_SDRAM_BASE + gd->ram_size) {
+ err = -EFAULT;
+ goto fail;
+ }
+
+ /* Things must be 16-byte aligned. */
+ if ((seg_length & 0xF) || (seg_address & 0xF)) {
+ err = -EINVAL;
+ goto fail;
+ }
+
+ /* Will the code fit? (destination includes wb_header + wb code) */
+ if (seg_length < (length + sizeof(struct wb_header))) {
+ err = -EINVAL;
+ goto fail;
+ }
+
+ dst_header = (struct wb_header *)seg_address;
+ memset((char *)dst_header, 0, sizeof(struct wb_header));
+
+ /* Populate the random_aes_block as requested. */
+ {
+ u32 *aes_block = (u32 *)&(dst_header->random_aes_block);
+ u32 *end = (u32 *)(((u32)aes_block) +
+ sizeof(dst_header->random_aes_block));
+
+ do {
+ *aes_block++ = 0;
+ } while (aes_block < end);
+ }
+
+ /* Populate the header. */
+ dst_header->length_insecure = length + sizeof(struct wb_header);
+ dst_header->length_secure = length + sizeof(struct wb_header);
+ dst_header->destination = AP20_WB_RUN_ADDRESS;
+ dst_header->entry_point = AP20_WB_RUN_ADDRESS;
+ dst_header->code_length = length;
+
+ if (is_encrypted) {
+ printf("!!!! Encryption is not supported !!!!\n");
+ dst_header->length_insecure = 0;
+ err = -EACCES;
+ goto fail;
+ } else
+ /* copy the wb code directly following dst_header. */
+ memcpy((char *)(dst_header+1), (char *)wb_start, length);
+
+ if (is_signed)
+ err = sign_wb_code(seg_address, dst_header->length_insecure,
+ use_zero_key);
+
+fail:
+ if (err)
+ printf("Warning: warmboot code copy failed (error=%d)\n", err);
+
+ return err;
+}
--- /dev/null
+/*
+ * (C) Copyright 2010 - 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/flow.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/tegra20.h>
+#include <asm/arch/warmboot.h>
+#include "warmboot_avp.h"
+
+#define DEBUG_RESET_CORESIGHT
+
+void wb_start(void)
+{
+ struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
+ struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE;
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ union osc_ctrl_reg osc_ctrl;
+ union pllx_base_reg pllx_base;
+ union pllx_misc_reg pllx_misc;
+ union scratch3_reg scratch3;
+ u32 reg;
+
+ /* enable JTAG & TBE */
+ writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &pmt->pmt_cfg_ctl);
+
+ /* Are we running where we're supposed to be? */
+ asm volatile (
+ "adr %0, wb_start;" /* reg: wb_start address */
+ : "=r"(reg) /* output */
+ /* no input, no clobber list */
+ );
+
+ if (reg != AP20_WB_RUN_ADDRESS)
+ goto do_reset;
+
+ /* Are we running with AVP? */
+ if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP)
+ goto do_reset;
+
+#ifdef DEBUG_RESET_CORESIGHT
+ /* Assert CoreSight reset */
+ reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
+ reg |= SWR_CSITE_RST;
+ writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
+#endif
+
+ /* TODO: Set the drive strength - maybe make this a board parameter? */
+ osc_ctrl.word = readl(&clkrst->crc_osc_ctrl);
+ osc_ctrl.xofs = 4;
+ osc_ctrl.xoe = 1;
+ writel(osc_ctrl.word, &clkrst->crc_osc_ctrl);
+
+ /* Power up the CPU complex if necessary */
+ if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) {
+ reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START;
+ writel(reg, &pmc->pmc_pwrgate_toggle);
+ while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU))
+ ;
+ }
+
+ /* Remove the I/O clamps from the CPU power partition. */
+ reg = readl(&pmc->pmc_remove_clamping);
+ reg |= CPU_CLMP;
+ writel(reg, &pmc->pmc_remove_clamping);
+
+ reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP;
+ writel(reg, &flow->halt_cop_events);
+
+ /* Assert CPU complex reset */
+ reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
+ reg |= CPU_RST;
+ writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+
+ /* Hold both CPUs in reset */
+ reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 |
+ CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1;
+ writel(reg, &clkrst->crc_cpu_cmplx_set);
+
+ /* Halt CPU1 at the flow controller for uni-processor configurations */
+ writel(EVENT_MODE_STOP, &flow->halt_cpu1_events);
+
+ /*
+ * Set the CPU reset vector. SCRATCH41 contains the physical
+ * address of the CPU-side restoration code.
+ */
+ reg = readl(&pmc->pmc_scratch41);
+ writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR);
+
+ /* Select CPU complex clock source */
+ writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol);
+
+ /* Start the CPU0 clock and stop the CPU1 clock */
+ reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN |
+ CPU_CMPLX_CPU1_CLK_STP_STOP;
+ writel(reg, &clkrst->crc_clk_cpu_cmplx);
+
+ /* Enable the CPU complex clock */
+ reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
+ reg |= CLK_ENB_CPU;
+ writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]);
+
+ /* Make sure the resets were held for at least 2 microseconds */
+ reg = readl(TIMER_USEC_CNTR);
+ while (readl(TIMER_USEC_CNTR) <= (reg + 2))
+ ;
+
+#ifdef DEBUG_RESET_CORESIGHT
+ /*
+ * De-assert CoreSight reset.
+ * NOTE: We're leaving the CoreSight clock on the oscillator for
+ * now. It will be restored to its original clock source
+ * when the CPU-side restoration code runs.
+ */
+ reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]);
+ reg &= ~SWR_CSITE_RST;
+ writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]);
+#endif
+
+ /* Unlock the CPU CoreSight interfaces */
+ reg = 0xC5ACCE55;
+ writel(reg, CSITE_CPU_DBG0_LAR);
+ writel(reg, CSITE_CPU_DBG1_LAR);
+
+ /*
+ * Sample the microsecond timestamp again. This is the time we must
+ * use when returning from LP0 for PLL stabilization delays.
+ */
+ reg = readl(TIMER_USEC_CNTR);
+ writel(reg, &pmc->pmc_scratch1);
+
+ pllx_base.word = 0;
+ pllx_misc.word = 0;
+ scratch3.word = readl(&pmc->pmc_scratch3);
+
+ /* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */
+ reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1;
+
+ /*
+ * According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and
+ * USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz.
+ *
+ * reg is used to calculate the pllx freq, which is used to determine if
+ * to set dccon or not.
+ */
+ if (reg > 26)
+ reg = 19;
+
+ /* PLLX_BASE.PLLX_DIVM */
+ if (scratch3.pllx_base_divm == reg)
+ reg = 0;
+ else
+ reg = 1;
+
+ /* PLLX_BASE.PLLX_DIVN */
+ pllx_base.divn = scratch3.pllx_base_divn;
+ reg = scratch3.pllx_base_divn << reg;
+
+ /* PLLX_BASE.PLLX_DIVP */
+ pllx_base.divp = scratch3.pllx_base_divp;
+ reg = reg >> scratch3.pllx_base_divp;
+
+ pllx_base.bypass = 1;
+
+ /* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */
+ if (reg > 600)
+ pllx_misc.dccon = 1;
+
+ /* PLLX_MISC_LFCON */
+ pllx_misc.lfcon = scratch3.pllx_misc_lfcon;
+
+ /* PLLX_MISC_CPCON */
+ pllx_misc.cpcon = scratch3.pllx_misc_cpcon;
+
+ writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc);
+ writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+
+ pllx_base.enable = 1;
+ writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+ pllx_base.bypass = 0;
+ writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base);
+
+ writel(0, flow->halt_cpu_events);
+
+ reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0;
+ writel(reg, &clkrst->crc_cpu_cmplx_clr);
+
+ reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE |
+ PLLM_OUT1_RATIO_VAL_8;
+ writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out);
+
+ reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 |
+ SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 |
+ SCLK_SYS_STATE_IDLE;
+ writel(reg, &clkrst->crc_sclk_brst_pol);
+
+ /* avp_resume: no return after the write */
+ reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]);
+ reg &= ~CPU_RST;
+ writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+
+ /* avp_halt: */
+avp_halt:
+ reg = EVENT_MODE_STOP | EVENT_JTAG;
+ writel(reg, flow->halt_cop_events);
+ goto avp_halt;
+
+do_reset:
+ /*
+ * Execution comes here if something goes wrong. The chip is reset and
+ * a cold boot is performed.
+ */
+ writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]);
+ goto do_reset;
+}
+
+/*
+ * wb_end() is a dummy function, and must be directly following wb_start(),
+ * and is used to calculate the size of wb_start().
+ */
+void wb_end(void)
+{
+}
--- /dev/null
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _WARMBOOT_AVP_H_
+#define _WARMBOOT_AVP_H_
+
+#define TEGRA_DEV_L 0
+#define TEGRA_DEV_H 1
+#define TEGRA_DEV_U 2
+
+#define SIMPLE_PLLX (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE)
+#define SIMPLE_PLLE (CLOCK_ID_EPCI - CLOCK_ID_FIRST_SIMPLE)
+
+#define TIMER_USEC_CNTR (NV_PA_TMRUS_BASE + 0)
+#define TIMER_USEC_CFG (NV_PA_TMRUS_BASE + 4)
+
+#define USEC_CFG_DIVISOR_MASK 0xffff
+
+#define CONFIG_CTL_TBE (1 << 7)
+#define CONFIG_CTL_JTAG (1 << 6)
+
+#define CPU_RST (1 << 0)
+#define CLK_ENB_CPU (1 << 0)
+#define SWR_TRIG_SYS_RST (1 << 2)
+#define SWR_CSITE_RST (1 << 9)
+
+#define PWRGATE_STATUS_CPU (1 << 0)
+#define PWRGATE_TOGGLE_PARTID_CPU (0 << 0)
+#define PWRGATE_TOGGLE_START (1 << 8)
+
+#define CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 (3 << 0)
+#define CPU_CMPLX_CPU0_CLK_STP_STOP (1 << 8)
+#define CPU_CMPLX_CPU0_CLK_STP_RUN (0 << 8)
+#define CPU_CMPLX_CPU1_CLK_STP_STOP (1 << 9)
+#define CPU_CMPLX_CPU1_CLK_STP_RUN (0 << 9)
+
+#define CPU_CMPLX_CPURESET0 (1 << 0)
+#define CPU_CMPLX_CPURESET1 (1 << 1)
+#define CPU_CMPLX_DERESET0 (1 << 4)
+#define CPU_CMPLX_DERESET1 (1 << 5)
+#define CPU_CMPLX_DBGRESET0 (1 << 12)
+#define CPU_CMPLX_DBGRESET1 (1 << 13)
+
+#define PLLM_OUT1_RSTN_RESET_DISABLE (1 << 0)
+#define PLLM_OUT1_CLKEN_ENABLE (1 << 1)
+#define PLLM_OUT1_RATIO_VAL_8 (8 << 8)
+
+#define SCLK_SYS_STATE_IDLE (1 << 28)
+#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 (7 << 12)
+#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 (7 << 8)
+#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1 (7 << 4)
+#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 (7 << 0)
+
+#define EVENT_ZERO_VAL_20 (20 << 0)
+#define EVENT_MSEC (1 << 24)
+#define EVENT_JTAG (1 << 28)
+#define EVENT_MODE_STOP (2 << 29)
+
+#define CCLK_PLLP_BURST_POLICY 0x20004444
+
+#endif
+++ /dev/null
-/*
- * (C) Copyright 2010-2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <asm/types.h>
-
-/* Stabilization delays, in usec */
-#define PLL_STABILIZATION_DELAY (300)
-#define IO_STABILIZATION_DELAY (1000)
-
-#define NVBL_PLLP_KHZ (216000)
-
-#define PLLX_ENABLED (1 << 30)
-#define CCLK_BURST_POLICY 0x20008888
-#define SUPER_CCLK_DIVIDER 0x80000000
-
-/* Calculate clock fractional divider value from ref and target frequencies */
-#define CLK_DIVIDER(REF, FREQ) ((((REF) * 2) / FREQ) - 2)
-
-/* Calculate clock frequency value from reference and clock divider value */
-#define CLK_FREQUENCY(REF, REG) (((REF) * 2) / (REG + 2))
-
-/* AVP/CPU ID */
-#define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */
-#define PG_UP_TAG_0 0x0
-
-#define CORESIGHT_UNLOCK 0xC5ACCE55;
-
-/* AP20-Specific Base Addresses */
-
-/* AP20 Base physical address of SDRAM. */
-#define AP20_BASE_PA_SDRAM 0x00000000
-/* AP20 Base physical address of internal SRAM. */
-#define AP20_BASE_PA_SRAM 0x40000000
-/* AP20 Size of internal SRAM (256KB). */
-#define AP20_BASE_PA_SRAM_SIZE 0x00040000
-/* AP20 Base physical address of flash. */
-#define AP20_BASE_PA_NOR_FLASH 0xD0000000
-/* AP20 Base physical address of boot information table. */
-#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM
-
-/*
- * Super-temporary stacks for EXTREMELY early startup. The values chosen for
- * these addresses must be valid on ALL SOCs because this value is used before
- * we are able to differentiate between the SOC types.
- *
- * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its
- * stack is placed below the AVP stack. Once the CPU stack has been moved,
- * the AVP is free to use the IRAM the CPU stack previously occupied if
- * it should need to do so.
- *
- * NOTE: In multi-processor CPU complex configurations, each processor will have
- * its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a
- * limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a
- * stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous
- * CPU.
- */
-
-/* Common AVP early boot stack limit */
-#define AVP_EARLY_BOOT_STACK_LIMIT \
- (AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2))
-/* Common AVP early boot stack size */
-#define AVP_EARLY_BOOT_STACK_SIZE 0x1000
-/* Common CPU early boot stack limit */
-#define CPU_EARLY_BOOT_STACK_LIMIT \
- (AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE)
-/* Common CPU early boot stack size */
-#define CPU_EARLY_BOOT_STACK_SIZE 0x1000
-
-#define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100)
-#define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0)
-#define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0)
-
-#define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4)
-#define FLOW_MODE_STOP 2
-#define HALT_COP_EVENT_JTAG (1 << 28)
-#define HALT_COP_EVENT_IRQ_1 (1 << 11)
-#define HALT_COP_EVENT_FIQ_1 (1 << 9)
-
-/* Start up the tegra2 SOC */
-void tegra2_start(void);
-
-/* This is the main entry into U-Boot, used by the Cortex-A9 */
-extern void _start(void);
-
-/**
- * Works out the SOC type used for clocks settings
- *
- * @return SOC type - see TEGRA_SOC...
- */
-int tegra_get_chip_type(void);
+++ /dev/null
-/*
- * Copyright (c) 2012 The Chromium OS Authors.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _GP_PADCTRL_H_
-#define _GP_PADCTRL_H_
-
-/* APB_MISC_PP registers */
-struct apb_misc_pp_ctlr {
- u32 reserved0[2];
- u32 strapping_opt_a;/* 0x08: APB_MISC_PP_STRAPPING_OPT_A */
-};
-
-/* bit fields definitions for APB_MISC_PP_STRAPPING_OPT_A register */
-#define RAM_CODE_SHIFT 4
-#define RAM_CODE_MASK (0xf << RAM_CODE_SHIFT)
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA_BOARD_H_
-#define _TEGRA_BOARD_H_
-
-/* Setup UARTs for the board according to the selected config */
-void board_init_uart_f(void);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _CLK_RST_H_
-#define _CLK_RST_H_
-
-/* PLL registers - there are several PLLs in the clock controller */
-struct clk_pll {
- uint pll_base; /* the control register */
- uint pll_out; /* output control */
- uint reserved;
- uint pll_misc; /* other misc things */
-};
-
-/* PLL registers - there are several PLLs in the clock controller */
-struct clk_pll_simple {
- uint pll_base; /* the control register */
- uint pll_misc; /* other misc things */
-};
-
-/*
- * Most PLLs use the clk_pll structure, but some have a simpler two-member
- * structure for which we use clk_pll_simple. The reason for this non-
- * othogonal setup is not stated.
- */
-enum {
- TEGRA_CLK_PLLS = 6, /* Number of normal PLLs */
- TEGRA_CLK_SIMPLE_PLLS = 3, /* Number of simple PLLs */
- TEGRA_CLK_REGS = 3, /* Number of clock enable registers */
- TEGRA_CLK_SOURCES = 64, /* Number of peripheral clock sources */
-};
-
-/* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */
-struct clk_rst_ctlr {
- uint crc_rst_src; /* _RST_SOURCE_0,0x00 */
- uint crc_rst_dev[TEGRA_CLK_REGS]; /* _RST_DEVICES_L/H/U_0 */
- uint crc_clk_out_enb[TEGRA_CLK_REGS]; /* _CLK_OUT_ENB_L/H/U_0 */
- uint crc_reserved0; /* reserved_0, 0x1C */
- uint crc_cclk_brst_pol; /* _CCLK_BURST_POLICY_0,0x20 */
- uint crc_super_cclk_div; /* _SUPER_CCLK_DIVIDER_0,0x24 */
- uint crc_sclk_brst_pol; /* _SCLK_BURST_POLICY_0, 0x28 */
- uint crc_super_sclk_div; /* _SUPER_SCLK_DIVIDER_0,0x2C */
- uint crc_clk_sys_rate; /* _CLK_SYSTEM_RATE_0, 0x30 */
- uint crc_prog_dly_clk; /* _PROG_DLY_CLK_0, 0x34 */
- uint crc_aud_sync_clk_rate; /* _AUDIO_SYNC_CLK_RATE_0,0x38 */
- uint crc_reserved1; /* reserved_1, 0x3C */
- uint crc_cop_clk_skip_plcy; /* _COP_CLK_SKIP_POLICY_0,0x40 */
- uint crc_clk_mask_arm; /* _CLK_MASK_ARM_0, 0x44 */
- uint crc_misc_clk_enb; /* _MISC_CLK_ENB_0, 0x48 */
- uint crc_clk_cpu_cmplx; /* _CLK_CPU_CMPLX_0, 0x4C */
- uint crc_osc_ctrl; /* _OSC_CTRL_0, 0x50 */
- uint crc_pll_lfsr; /* _PLL_LFSR_0, 0x54 */
- uint crc_osc_freq_det; /* _OSC_FREQ_DET_0, 0x58 */
- uint crc_osc_freq_det_stat; /* _OSC_FREQ_DET_STATUS_0,0x5C */
- uint crc_reserved2[8]; /* reserved_2[8], 0x60-7C */
-
- struct clk_pll crc_pll[TEGRA_CLK_PLLS]; /* PLLs from 0x80 to 0xdc */
-
- /* PLLs from 0xe0 to 0xf4 */
- struct clk_pll_simple crc_pll_simple[TEGRA_CLK_SIMPLE_PLLS];
-
- uint crc_reserved10; /* _reserved_10, 0xF8 */
- uint crc_reserved11; /* _reserved_11, 0xFC */
-
- uint crc_clk_src[TEGRA_CLK_SOURCES]; /*_I2S1_0... 0x100-1fc */
- uint crc_reserved20[80]; /* 0x200-33C */
- uint crc_cpu_cmplx_set; /* _CPU_CMPLX_SET_0, 0x340 */
- uint crc_cpu_cmplx_clr; /* _CPU_CMPLX_CLR_0, 0x344 */
-};
-
-/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
-#define CPU1_CLK_STP_SHIFT 9
-
-#define CPU0_CLK_STP_SHIFT 8
-#define CPU0_CLK_STP_MASK (1U << CPU0_CLK_STP_SHIFT)
-
-/* CLK_RST_CONTROLLER_PLLx_BASE_0 */
-#define PLL_BYPASS_SHIFT 31
-#define PLL_BYPASS_MASK (1U << PLL_BYPASS_SHIFT)
-
-#define PLL_ENABLE_SHIFT 30
-#define PLL_ENABLE_MASK (1U << PLL_ENABLE_SHIFT)
-
-#define PLL_BASE_OVRRIDE_MASK (1U << 28)
-
-#define PLL_DIVP_SHIFT 20
-#define PLL_DIVP_MASK (7U << PLL_DIVP_SHIFT)
-
-#define PLL_DIVN_SHIFT 8
-#define PLL_DIVN_MASK (0x3ffU << PLL_DIVN_SHIFT)
-
-#define PLL_DIVM_SHIFT 0
-#define PLL_DIVM_MASK (0x1f << PLL_DIVM_SHIFT)
-
-/* CLK_RST_CONTROLLER_PLLx_MISC_0 */
-#define PLL_CPCON_SHIFT 8
-#define PLL_CPCON_MASK (15U << PLL_CPCON_SHIFT)
-
-#define PLL_LFCON_SHIFT 4
-#define PLL_LFCON_MASK (15U << PLL_LFCON_SHIFT)
-
-#define PLLU_VCO_FREQ_SHIFT 20
-#define PLLU_VCO_FREQ_MASK (1U << PLLU_VCO_FREQ_SHIFT)
-
-/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
-#define OSC_FREQ_SHIFT 30
-#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT)
-#define OSC_XOBP_SHIFT 1
-#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT)
-
-/*
- * CLK_RST_CONTROLLER_CLK_SOURCE_x_OUT_0 - the mask here is normally 8 bits
- * but can be 16. We could use knowledge we have to restrict the mask in
- * the 8-bit cases (the divider_bits value returned by
- * get_periph_clock_source()) but it does not seem worth it since the code
- * already checks the ranges of values it is writing, in clk_get_divider().
- */
-#define OUT_CLK_DIVISOR_SHIFT 0
-#define OUT_CLK_DIVISOR_MASK (0xffff << OUT_CLK_DIVISOR_SHIFT)
-
-#define OUT_CLK_SOURCE_SHIFT 30
-#define OUT_CLK_SOURCE_MASK (3U << OUT_CLK_SOURCE_SHIFT)
-
-#define OUT_CLK_SOURCE4_SHIFT 28
-#define OUT_CLK_SOURCE4_MASK (15U << OUT_CLK_SOURCE4_SHIFT)
-
-#endif /* CLK_RST_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Tegra2 clock control functions */
-
-#ifndef _CLOCK_H
-#define _CLOCK_H
-
-/* Set of oscillator frequencies supported in the internal API. */
-enum clock_osc_freq {
- /* All in MHz, so 13_0 is 13.0MHz */
- CLOCK_OSC_FREQ_13_0,
- CLOCK_OSC_FREQ_19_2,
- CLOCK_OSC_FREQ_12_0,
- CLOCK_OSC_FREQ_26_0,
-
- CLOCK_OSC_FREQ_COUNT,
-};
-
-/* The PLLs supported by the hardware */
-enum clock_id {
- CLOCK_ID_FIRST,
- CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
- CLOCK_ID_MEMORY,
- CLOCK_ID_PERIPH,
- CLOCK_ID_AUDIO,
- CLOCK_ID_USB,
- CLOCK_ID_DISPLAY,
-
- /* now the simple ones */
- CLOCK_ID_FIRST_SIMPLE,
- CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
- CLOCK_ID_EPCI,
- CLOCK_ID_SFROM32KHZ,
-
- /* These are the base clocks (inputs to the Tegra SOC) */
- CLOCK_ID_32KHZ,
- CLOCK_ID_OSC,
-
- CLOCK_ID_COUNT, /* number of clocks */
- CLOCK_ID_NONE = -1,
-};
-
-/* The clocks supported by the hardware */
-enum periph_id {
- PERIPH_ID_FIRST,
-
- /* Low word: 31:0 */
- PERIPH_ID_CPU = PERIPH_ID_FIRST,
- PERIPH_ID_RESERVED1,
- PERIPH_ID_RESERVED2,
- PERIPH_ID_AC97,
- PERIPH_ID_RTC,
- PERIPH_ID_TMR,
- PERIPH_ID_UART1,
- PERIPH_ID_UART2,
-
- /* 8 */
- PERIPH_ID_GPIO,
- PERIPH_ID_SDMMC2,
- PERIPH_ID_SPDIF,
- PERIPH_ID_I2S1,
- PERIPH_ID_I2C1,
- PERIPH_ID_NDFLASH,
- PERIPH_ID_SDMMC1,
- PERIPH_ID_SDMMC4,
-
- /* 16 */
- PERIPH_ID_TWC,
- PERIPH_ID_PWM,
- PERIPH_ID_I2S2,
- PERIPH_ID_EPP,
- PERIPH_ID_VI,
- PERIPH_ID_2D,
- PERIPH_ID_USBD,
- PERIPH_ID_ISP,
-
- /* 24 */
- PERIPH_ID_3D,
- PERIPH_ID_IDE,
- PERIPH_ID_DISP2,
- PERIPH_ID_DISP1,
- PERIPH_ID_HOST1X,
- PERIPH_ID_VCP,
- PERIPH_ID_RESERVED30,
- PERIPH_ID_CACHE2,
-
- /* Middle word: 63:32 */
- PERIPH_ID_MEM,
- PERIPH_ID_AHBDMA,
- PERIPH_ID_APBDMA,
- PERIPH_ID_RESERVED35,
- PERIPH_ID_KBC,
- PERIPH_ID_STAT_MON,
- PERIPH_ID_PMC,
- PERIPH_ID_FUSE,
-
- /* 40 */
- PERIPH_ID_KFUSE,
- PERIPH_ID_SBC1,
- PERIPH_ID_SNOR,
- PERIPH_ID_SPI1,
- PERIPH_ID_SBC2,
- PERIPH_ID_XIO,
- PERIPH_ID_SBC3,
- PERIPH_ID_DVC_I2C,
-
- /* 48 */
- PERIPH_ID_DSI,
- PERIPH_ID_TVO,
- PERIPH_ID_MIPI,
- PERIPH_ID_HDMI,
- PERIPH_ID_CSI,
- PERIPH_ID_TVDAC,
- PERIPH_ID_I2C2,
- PERIPH_ID_UART3,
-
- /* 56 */
- PERIPH_ID_RESERVED56,
- PERIPH_ID_EMC,
- PERIPH_ID_USB2,
- PERIPH_ID_USB3,
- PERIPH_ID_MPE,
- PERIPH_ID_VDE,
- PERIPH_ID_BSEA,
- PERIPH_ID_BSEV,
-
- /* Upper word 95:64 */
- PERIPH_ID_SPEEDO,
- PERIPH_ID_UART4,
- PERIPH_ID_UART5,
- PERIPH_ID_I2C3,
- PERIPH_ID_SBC4,
- PERIPH_ID_SDMMC3,
- PERIPH_ID_PCIE,
- PERIPH_ID_OWR,
-
- /* 72 */
- PERIPH_ID_AFI,
- PERIPH_ID_CORESIGHT,
- PERIPH_ID_RESERVED74,
- PERIPH_ID_AVPUCQ,
- PERIPH_ID_RESERVED76,
- PERIPH_ID_RESERVED77,
- PERIPH_ID_RESERVED78,
- PERIPH_ID_RESERVED79,
-
- /* 80 */
- PERIPH_ID_RESERVED80,
- PERIPH_ID_RESERVED81,
- PERIPH_ID_RESERVED82,
- PERIPH_ID_RESERVED83,
- PERIPH_ID_IRAMA,
- PERIPH_ID_IRAMB,
- PERIPH_ID_IRAMC,
- PERIPH_ID_IRAMD,
-
- /* 88 */
- PERIPH_ID_CRAM2,
-
- PERIPH_ID_COUNT,
- PERIPH_ID_NONE = -1,
-};
-
-/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */
-#define PERIPH_REG(id) ((id) >> 5)
-
-/* Mask value for a clock (within PERIPH_REG(id)) */
-#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
-
-/* return 1 if a PLL ID is in range, and not a simple PLL */
-#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && \
- (id) < CLOCK_ID_FIRST_SIMPLE)
-
-/* PLL stabilization delay in usec */
-#define CLOCK_PLL_STABLE_DELAY_US 300
-
-/* return the current oscillator clock frequency */
-enum clock_osc_freq clock_get_osc_freq(void);
-
-/**
- * Start PLL using the provided configuration parameters.
- *
- * @param id clock id
- * @param divm input divider
- * @param divn feedback divider
- * @param divp post divider 2^n
- * @param cpcon charge pump setup control
- * @param lfcon loop filter setup control
- *
- * @returns monotonic time in us that the PLL will be stable
- */
-unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn,
- u32 divp, u32 cpcon, u32 lfcon);
-
-/**
- * Read low-level parameters of a PLL.
- *
- * @param id clock id to read (note: USB is not supported)
- * @param divm returns input divider
- * @param divn returns feedback divider
- * @param divp returns post divider 2^n
- * @param cpcon returns charge pump setup control
- * @param lfcon returns loop filter setup control
- *
- * @returns 0 if ok, -1 on error (invalid clock id)
- */
-int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
- u32 *divp, u32 *cpcon, u32 *lfcon);
-
-/*
- * Enable a clock
- *
- * @param id clock id
- */
-void clock_enable(enum periph_id clkid);
-
-/*
- * Disable a clock
- *
- * @param id clock id
- */
-void clock_disable(enum periph_id clkid);
-
-/*
- * Set whether a clock is enabled or disabled.
- *
- * @param id clock id
- * @param enable 1 to enable, 0 to disable
- */
-void clock_set_enable(enum periph_id clkid, int enable);
-
-/**
- * Reset a peripheral. This puts it in reset, waits for a delay, then takes
- * it out of reset and waits for th delay again.
- *
- * @param periph_id peripheral to reset
- * @param us_delay time to delay in microseconds
- */
-void reset_periph(enum periph_id periph_id, int us_delay);
-
-/**
- * Put a peripheral into or out of reset.
- *
- * @param periph_id peripheral to reset
- * @param enable 1 to put into reset, 0 to take out of reset
- */
-void reset_set_enable(enum periph_id periph_id, int enable);
-
-
-/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */
-enum crc_reset_id {
- /* Things we can hold in reset for each CPU */
- crc_rst_cpu = 1,
- crc_rst_de = 1 << 2, /* What is de? */
- crc_rst_watchdog = 1 << 3,
- crc_rst_debug = 1 << 4,
-};
-
-/**
- * Put parts of the CPU complex into or out of reset.\
- *
- * @param cpu cpu number (0 or 1 on Tegra2)
- * @param which which parts of the complex to affect (OR of crc_reset_id)
- * @param reset 1 to assert reset, 0 to de-assert
- */
-void reset_cmplx_set_enable(int cpu, int which, int reset);
-
-/**
- * Set the source for a peripheral clock. This plus the divisor sets the
- * clock rate. You need to look up the datasheet to see the meaning of the
- * source parameter as it changes for each peripheral.
- *
- * Warning: This function is only for use pre-relocation. Please use
- * clock_start_periph_pll() instead.
- *
- * @param periph_id peripheral to adjust
- * @param source source clock (0, 1, 2 or 3)
- */
-void clock_ll_set_source(enum periph_id periph_id, unsigned source);
-
-/**
- * Set the source and divisor for a peripheral clock. This sets the
- * clock rate. You need to look up the datasheet to see the meaning of the
- * source parameter as it changes for each peripheral.
- *
- * Warning: This function is only for use pre-relocation. Please use
- * clock_start_periph_pll() instead.
- *
- * @param periph_id peripheral to adjust
- * @param source source clock (0, 1, 2 or 3)
- * @param divisor divisor value to use
- */
-void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
- unsigned divisor);
-
-/**
- * Start a peripheral PLL clock at the given rate. This also resets the
- * peripheral.
- *
- * @param periph_id peripheral to start
- * @param parent PLL id of required parent clock
- * @param rate Required clock rate in Hz
- * @return rate selected in Hz, or -1U if something went wrong
- */
-unsigned clock_start_periph_pll(enum periph_id periph_id,
- enum clock_id parent, unsigned rate);
-
-/**
- * Returns the rate of a peripheral clock in Hz. Since the caller almost
- * certainly knows the parent clock (having just set it) we require that
- * this be passed in so we don't need to work it out.
- *
- * @param periph_id peripheral to start
- * @param parent PLL id of parent clock (used to calculate rate, you
- * must know this!)
- * @return clock rate of peripheral in Hz
- */
-unsigned long clock_get_periph_rate(enum periph_id periph_id,
- enum clock_id parent);
-
-/**
- * Adjust peripheral PLL clock to the given rate. This does not reset the
- * peripheral. If a second stage divisor is not available, pass NULL for
- * extra_div. If it is available, then this parameter will return the
- * divisor selected (which will be a power of 2 from 1 to 256).
- *
- * @param periph_id peripheral to start
- * @param parent PLL id of required parent clock
- * @param rate Required clock rate in Hz
- * @param extra_div value for the second-stage divisor (NULL if one is
- not available)
- * @return rate selected in Hz, or -1U if something went wrong
- */
-unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
- enum clock_id parent, unsigned rate, int *extra_div);
-
-/**
- * Returns the clock rate of a specified clock, in Hz.
- *
- * @param parent PLL id of clock to check
- * @return rate of clock in Hz
- */
-unsigned clock_get_rate(enum clock_id clkid);
-
-/**
- * Start up a UART using low-level calls
- *
- * Prior to relocation clock_start_periph_pll() cannot be called. This
- * function provides a way to set up a UART using low-level calls which
- * do not require BSS.
- *
- * @param periph_id Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1)
- */
-void clock_ll_start_uart(enum periph_id periph_id);
-
-/**
- * Decode a peripheral ID from a device tree node.
- *
- * This works by looking up the peripheral's 'clocks' node and reading out
- * the second cell, which is the clock number / peripheral ID.
- *
- * @param blob FDT blob to use
- * @param node Node to look at
- * @return peripheral ID, or PERIPH_ID_NONE if none
- */
-enum periph_id clock_decode_periph_id(const void *blob, int node);
-
-/**
- * Checks if the oscillator bypass is enabled (XOBP bit)
- *
- * @return 1 if bypass is enabled, 0 if not
- */
-int clock_get_osc_bypass(void);
-
-/*
- * Checks that clocks are valid and prints a warning if not
- *
- * @return 0 if ok, -1 on error
- */
-int clock_verify(void);
-
-/* Initialize the clocks */
-void clock_init(void);
-
-/* Initialize the PLLs */
-void clock_early_init(void);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ARCH_EMC_H_
-#define _ARCH_EMC_H_
-
-#include <asm/types.h>
-
-#define TEGRA_EMC_NUM_REGS 46
-
-/* EMC Registers */
-struct emc_ctlr {
- u32 cfg; /* 0x00: EMC_CFG */
- u32 reserved0[3]; /* 0x04 ~ 0x0C */
- u32 adr_cfg; /* 0x10: EMC_ADR_CFG */
- u32 adr_cfg1; /* 0x14: EMC_ADR_CFG_1 */
- u32 reserved1[2]; /* 0x18 ~ 0x18 */
- u32 refresh_ctrl; /* 0x20: EMC_REFCTRL */
- u32 pin; /* 0x24: EMC_PIN */
- u32 timing_ctrl; /* 0x28: EMC_TIMING_CONTROL */
- u32 rc; /* 0x2C: EMC_RC */
- u32 rfc; /* 0x30: EMC_RFC */
- u32 ras; /* 0x34: EMC_RAS */
- u32 rp; /* 0x38: EMC_RP */
- u32 r2w; /* 0x3C: EMC_R2W */
- u32 w2r; /* 0x40: EMC_W2R */
- u32 r2p; /* 0x44: EMC_R2P */
- u32 w2p; /* 0x48: EMC_W2P */
- u32 rd_rcd; /* 0x4C: EMC_RD_RCD */
- u32 wd_rcd; /* 0x50: EMC_WD_RCD */
- u32 rrd; /* 0x54: EMC_RRD */
- u32 rext; /* 0x58: EMC_REXT */
- u32 wdv; /* 0x5C: EMC_WDV */
- u32 quse; /* 0x60: EMC_QUSE */
- u32 qrst; /* 0x64: EMC_QRST */
- u32 qsafe; /* 0x68: EMC_QSAFE */
- u32 rdv; /* 0x6C: EMC_RDV */
- u32 refresh; /* 0x70: EMC_REFRESH */
- u32 burst_refresh_num; /* 0x74: EMC_BURST_REFRESH_NUM */
- u32 pdex2wr; /* 0x78: EMC_PDEX2WR */
- u32 pdex2rd; /* 0x7c: EMC_PDEX2RD */
- u32 pchg2pden; /* 0x80: EMC_PCHG2PDEN */
- u32 act2pden; /* 0x84: EMC_ACT2PDEN */
- u32 ar2pden; /* 0x88: EMC_AR2PDEN */
- u32 rw2pden; /* 0x8C: EMC_RW2PDEN */
- u32 txsr; /* 0x90: EMC_TXSR */
- u32 tcke; /* 0x94: EMC_TCKE */
- u32 tfaw; /* 0x98: EMC_TFAW */
- u32 trpab; /* 0x9C: EMC_TRPAB */
- u32 tclkstable; /* 0xA0: EMC_TCLKSTABLE */
- u32 tclkstop; /* 0xA4: EMC_TCLKSTOP */
- u32 trefbw; /* 0xA8: EMC_TREFBW */
- u32 quse_extra; /* 0xAC: EMC_QUSE_EXTRA */
- u32 odt_write; /* 0xB0: EMC_ODT_WRITE */
- u32 odt_read; /* 0xB4: EMC_ODT_READ */
- u32 reserved2[5]; /* 0xB8 ~ 0xC8 */
- u32 mrs; /* 0xCC: EMC_MRS */
- u32 emrs; /* 0xD0: EMC_EMRS */
- u32 ref; /* 0xD4: EMC_REF */
- u32 pre; /* 0xD8: EMC_PRE */
- u32 nop; /* 0xDC: EMC_NOP */
- u32 self_ref; /* 0xE0: EMC_SELF_REF */
- u32 dpd; /* 0xE4: EMC_DPD */
- u32 mrw; /* 0xE8: EMC_MRW */
- u32 mrr; /* 0xEC: EMC_MRR */
- u32 reserved3; /* 0xF0: */
- u32 fbio_cfg1; /* 0xF4: EMC_FBIO_CFG1 */
- u32 fbio_dqsib_dly; /* 0xF8: EMC_FBIO_DQSIB_DLY */
- u32 fbio_dqsib_dly_msb; /* 0xFC: EMC_FBIO_DQSIB_DLY_MSG */
- u32 fbio_spare; /* 0x100: SBIO_SPARE */
- /* There are more registers ... */
-};
-
-/**
- * Set up the EMC for the given rate. The timing parameters are retrieved
- * from the device tree "nvidia,tegra20-emc" node and its
- * "nvidia,tegra20-emc-table" sub-nodes.
- *
- * @param blob Device tree blob
- * @param rate Clock speed of memory controller in Hz (=2x memory bus rate)
- * @return 0 if ok, else -ve error code (look in emc.c to decode it)
- */
-int tegra_set_emc(const void *blob, unsigned rate);
-
-/**
- * Get a pointer to the EMC controller from the device tree.
- *
- * @param blob Device tree blob
- * @return pointer to EMC controller
- */
-struct emc_ctlr *emc_get_controller(const void *blob);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010, 2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _FLOW_H_
-#define _FLOW_H_
-
-struct flow_ctlr {
- u32 halt_cpu_events;
- u32 halt_cop_events;
- u32 cpu_csr;
- u32 cop_csr;
- u32 halt_cpu1_events;
- u32 cpu1_csr;
-};
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Tegra2 high-level function multiplexing */
-
-#ifndef __FUNCMUX_H
-#define __FUNCMUX_H
-
-/* Configs supported by the func mux */
-enum {
- FUNCMUX_DEFAULT = 0, /* default config */
-
- /* UART configs */
- FUNCMUX_UART1_IRRX_IRTX = 0,
- FUNCMUX_UART1_UAA_UAB,
- FUNCMUX_UART1_GPU,
- FUNCMUX_UART1_SDIO1,
- FUNCMUX_UART2_IRDA = 0,
- FUNCMUX_UART4_GMC = 0,
-
- /* I2C configs */
- FUNCMUX_DVC_I2CP = 0,
- FUNCMUX_I2C1_RM = 0,
- FUNCMUX_I2C2_DDC = 0,
- FUNCMUX_I2C2_PTA,
- FUNCMUX_I2C3_DTF = 0,
-
- /* SDMMC configs */
- FUNCMUX_SDMMC1_SDIO1_4BIT = 0,
- FUNCMUX_SDMMC2_DTA_DTD_8BIT = 0,
- FUNCMUX_SDMMC3_SDB_4BIT = 0,
- FUNCMUX_SDMMC3_SDB_SLXA_8BIT,
- FUNCMUX_SDMMC4_ATC_ATD_8BIT = 0,
- FUNCMUX_SDMMC4_ATB_GMA_4_BIT,
- FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT,
-
- /* USB configs */
- FUNCMUX_USB2_ULPI = 0,
-
- /* Serial Flash configs */
- FUNCMUX_SPI1_GMC_GMD = 0,
-};
-
-/**
- * Select a config for a particular peripheral.
- *
- * Each peripheral can operate through a number of configurations,
- * which are sets of pins that it uses to bring out its signals.
- * The basic config is 0, and higher numbers indicate different
- * pinmux settings to bring the peripheral out on other pins,
- *
- * This function also disables tristate for the function's pins,
- * so that they operate in normal mode.
- *
- * @param id Peripheral id
- * @param config Configuration to use (FUNCMUX_...), 0 for default
- * @return 0 if ok, -1 on error (e.g. incorrect id or config)
- */
-int funcmux_select(enum periph_id id, int config);
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _FUSE_H_
-#define _FUSE_H_
-
-/* FUSE registers */
-struct fuse_regs {
- u32 reserved0[64]; /* 0x00 - 0xFC: */
- u32 production_mode; /* 0x100: FUSE_PRODUCTION_MODE */
- u32 reserved1[3]; /* 0x104 - 0x10c: */
- u32 sku_info; /* 0x110 */
- u32 reserved2[13]; /* 0x114 - 0x144: */
- u32 fa; /* 0x148: FUSE_FA */
- u32 reserved3[21]; /* 0x14C - 0x19C: */
- u32 security_mode; /* 0x1A0: FUSE_SECURITY_MODE */
-};
-
-#endif /* ifndef _FUSE_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _GP_PADCTRL_H_
-#define _GP_PADCTRL_H_
-
-/* APB_MISC_GP and padctrl registers */
-struct apb_misc_gp_ctlr {
- u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */
- u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */
- u32 reserved0[22]; /* 0x08 - 0x5C: */
- u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */
- u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
- u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
- u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
- u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
- u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
- u32 cdevcfg1; /* 0x78: APB_MISC_GP_CDEV1CFGPADCTRL */
- u32 cdevcfg2; /* 0x7C: APB_MISC_GP_CDEV2CFGPADCTRL */
- u32 csuscfg; /* 0x80: APB_MISC_GP_CSUSCFGPADCTRL */
- u32 dap1cfg; /* 0x84: APB_MISC_GP_DAP1CFGPADCTRL */
- u32 dap2cfg; /* 0x88: APB_MISC_GP_DAP2CFGPADCTRL */
- u32 dap3cfg; /* 0x8C: APB_MISC_GP_DAP3CFGPADCTRL */
- u32 dap4cfg; /* 0x90: APB_MISC_GP_DAP4CFGPADCTRL */
- u32 dbgcfg; /* 0x94: APB_MISC_GP_DBGCFGPADCTRL */
- u32 lcdcfg1; /* 0x98: APB_MISC_GP_LCDCFG1PADCTRL */
- u32 lcdcfg2; /* 0x9C: APB_MISC_GP_LCDCFG2PADCTRL */
- u32 sdmmc2_cfg; /* 0xA0: APB_MISC_GP_SDMMC2CFGPADCTRL */
- u32 sdmmc3_cfg; /* 0xA4: APB_MISC_GP_SDMMC3CFGPADCTRL */
- u32 spicfg; /* 0xA8: APB_MISC_GP_SPICFGPADCTRL */
- u32 uaacfg; /* 0xAC: APB_MISC_GP_UAACFGPADCTRL */
- u32 uabcfg; /* 0xB0: APB_MISC_GP_UABCFGPADCTRL */
- u32 uart2cfg; /* 0xB4: APB_MISC_GP_UART2CFGPADCTRL */
- u32 uart3cfg; /* 0xB8: APB_MISC_GP_UART3CFGPADCTRL */
- u32 vicfg1; /* 0xBC: APB_MISC_GP_VICFG1PADCTRL */
- u32 vicfg2; /* 0xC0: APB_MISC_GP_VICFG2PADCTRL */
- u32 xm2cfga; /* 0xC4: APB_MISC_GP_XM2CFGAPADCTRL */
- u32 xm2cfgc; /* 0xC8: APB_MISC_GP_XM2CFGCPADCTRL */
- u32 xm2cfgd; /* 0xCC: APB_MISC_GP_XM2CFGDPADCTRL */
- u32 xm2clkcfg; /* 0xD0: APB_MISC_GP_XM2CLKCFGPADCTRL */
- u32 memcomp; /* 0xD4: APB_MISC_GP_MEMCOMPPADCTRL */
-};
-
-/* bit fields definitions for APB_MISC_GP_HIDREV register */
-#define HIDREV_CHIPID_SHIFT 8
-#define HIDREV_CHIPID_MASK (0xff << HIDREV_CHIPID_SHIFT)
-#define HIDREV_MAJORPREV_SHIFT 4
-#define HIDREV_MAJORPREV_MASK (0xf << HIDREV_MAJORPREV_SHIFT)
-
-/* CHIPID field returned from APB_MISC_GP_HIDREV register */
-#define CHIPID_TEGRA2 0x20
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2011, Google Inc. All rights reserved.
- * See file CREDITS for list of people who contributed to this
- * project.
- * Portions Copyright 2011-2012 NVIDIA Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA_GPIO_H_
-#define _TEGRA_GPIO_H_
-
-/*
- * The Tegra 2x GPIO controller has 224 GPIOs arranged in 7 banks of 4 ports,
- * each with 8 GPIOs.
- */
-#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */
-#define TEGRA_GPIO_BANKS 7 /* number of banks */
-#define MAX_NUM_GPIOS (TEGRA_GPIO_PORTS * TEGRA_GPIO_BANKS * 8)
-#define GPIO_NAME_SIZE 20 /* gpio_request max label len */
-
-/* GPIO Controller registers for a single bank */
-struct gpio_ctlr_bank {
- uint gpio_config[TEGRA_GPIO_PORTS];
- uint gpio_dir_out[TEGRA_GPIO_PORTS];
- uint gpio_out[TEGRA_GPIO_PORTS];
- uint gpio_in[TEGRA_GPIO_PORTS];
- uint gpio_int_status[TEGRA_GPIO_PORTS];
- uint gpio_int_enable[TEGRA_GPIO_PORTS];
- uint gpio_int_level[TEGRA_GPIO_PORTS];
- uint gpio_int_clear[TEGRA_GPIO_PORTS];
-};
-
-struct gpio_ctlr {
- struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
-};
-
-#define GPIO_BANK(x) ((x) >> 5)
-#define GPIO_PORT(x) (((x) >> 3) & 0x3)
-#define GPIO_FULLPORT(x) ((x) >> 3)
-#define GPIO_BIT(x) ((x) & 0x7)
-
-enum gpio_pin {
- GPIO_PA0 = 0, /* pin 0 */
- GPIO_PA1,
- GPIO_PA2,
- GPIO_PA3,
- GPIO_PA4,
- GPIO_PA5,
- GPIO_PA6,
- GPIO_PA7,
- GPIO_PB0, /* pin 8 */
- GPIO_PB1,
- GPIO_PB2,
- GPIO_PB3,
- GPIO_PB4,
- GPIO_PB5,
- GPIO_PB6,
- GPIO_PB7,
- GPIO_PC0, /* pin 16 */
- GPIO_PC1,
- GPIO_PC2,
- GPIO_PC3,
- GPIO_PC4,
- GPIO_PC5,
- GPIO_PC6,
- GPIO_PC7,
- GPIO_PD0, /* pin 24 */
- GPIO_PD1,
- GPIO_PD2,
- GPIO_PD3,
- GPIO_PD4,
- GPIO_PD5,
- GPIO_PD6,
- GPIO_PD7,
- GPIO_PE0, /* pin 32 */
- GPIO_PE1,
- GPIO_PE2,
- GPIO_PE3,
- GPIO_PE4,
- GPIO_PE5,
- GPIO_PE6,
- GPIO_PE7,
- GPIO_PF0, /* pin 40 */
- GPIO_PF1,
- GPIO_PF2,
- GPIO_PF3,
- GPIO_PF4,
- GPIO_PF5,
- GPIO_PF6,
- GPIO_PF7,
- GPIO_PG0, /* pin 48 */
- GPIO_PG1,
- GPIO_PG2,
- GPIO_PG3,
- GPIO_PG4,
- GPIO_PG5,
- GPIO_PG6,
- GPIO_PG7,
- GPIO_PH0, /* pin 56 */
- GPIO_PH1,
- GPIO_PH2,
- GPIO_PH3,
- GPIO_PH4,
- GPIO_PH5,
- GPIO_PH6,
- GPIO_PH7,
- GPIO_PI0, /* pin 64 */
- GPIO_PI1,
- GPIO_PI2,
- GPIO_PI3,
- GPIO_PI4,
- GPIO_PI5,
- GPIO_PI6,
- GPIO_PI7,
- GPIO_PJ0, /* pin 72 */
- GPIO_PJ1,
- GPIO_PJ2,
- GPIO_PJ3,
- GPIO_PJ4,
- GPIO_PJ5,
- GPIO_PJ6,
- GPIO_PJ7,
- GPIO_PK0, /* pin 80 */
- GPIO_PK1,
- GPIO_PK2,
- GPIO_PK3,
- GPIO_PK4,
- GPIO_PK5,
- GPIO_PK6,
- GPIO_PK7,
- GPIO_PL0, /* pin 88 */
- GPIO_PL1,
- GPIO_PL2,
- GPIO_PL3,
- GPIO_PL4,
- GPIO_PL5,
- GPIO_PL6,
- GPIO_PL7,
- GPIO_PM0, /* pin 96 */
- GPIO_PM1,
- GPIO_PM2,
- GPIO_PM3,
- GPIO_PM4,
- GPIO_PM5,
- GPIO_PM6,
- GPIO_PM7,
- GPIO_PN0, /* pin 104 */
- GPIO_PN1,
- GPIO_PN2,
- GPIO_PN3,
- GPIO_PN4,
- GPIO_PN5,
- GPIO_PN6,
- GPIO_PN7,
- GPIO_PO0, /* pin 112 */
- GPIO_PO1,
- GPIO_PO2,
- GPIO_PO3,
- GPIO_PO4,
- GPIO_PO5,
- GPIO_PO6,
- GPIO_PO7,
- GPIO_PP0, /* pin 120 */
- GPIO_PP1,
- GPIO_PP2,
- GPIO_PP3,
- GPIO_PP4,
- GPIO_PP5,
- GPIO_PP6,
- GPIO_PP7,
- GPIO_PQ0, /* pin 128 */
- GPIO_PQ1,
- GPIO_PQ2,
- GPIO_PQ3,
- GPIO_PQ4,
- GPIO_PQ5,
- GPIO_PQ6,
- GPIO_PQ7,
- GPIO_PR0, /* pin 136 */
- GPIO_PR1,
- GPIO_PR2,
- GPIO_PR3,
- GPIO_PR4,
- GPIO_PR5,
- GPIO_PR6,
- GPIO_PR7,
- GPIO_PS0, /* pin 144 */
- GPIO_PS1,
- GPIO_PS2,
- GPIO_PS3,
- GPIO_PS4,
- GPIO_PS5,
- GPIO_PS6,
- GPIO_PS7,
- GPIO_PT0, /* pin 152 */
- GPIO_PT1,
- GPIO_PT2,
- GPIO_PT3,
- GPIO_PT4,
- GPIO_PT5,
- GPIO_PT6,
- GPIO_PT7,
- GPIO_PU0, /* pin 160 */
- GPIO_PU1,
- GPIO_PU2,
- GPIO_PU3,
- GPIO_PU4,
- GPIO_PU5,
- GPIO_PU6,
- GPIO_PU7,
- GPIO_PV0, /* pin 168 */
- GPIO_PV1,
- GPIO_PV2,
- GPIO_PV3,
- GPIO_PV4,
- GPIO_PV5,
- GPIO_PV6,
- GPIO_PV7,
- GPIO_PW0, /* pin 176 */
- GPIO_PW1,
- GPIO_PW2,
- GPIO_PW3,
- GPIO_PW4,
- GPIO_PW5,
- GPIO_PW6,
- GPIO_PW7,
- GPIO_PX0, /* pin 184 */
- GPIO_PX1,
- GPIO_PX2,
- GPIO_PX3,
- GPIO_PX4,
- GPIO_PX5,
- GPIO_PX6,
- GPIO_PX7,
- GPIO_PY0, /* pin 192 */
- GPIO_PY1,
- GPIO_PY2,
- GPIO_PY3,
- GPIO_PY4,
- GPIO_PY5,
- GPIO_PY6,
- GPIO_PY7,
- GPIO_PZ0, /* pin 200 */
- GPIO_PZ1,
- GPIO_PZ2,
- GPIO_PZ3,
- GPIO_PZ4,
- GPIO_PZ5,
- GPIO_PZ6,
- GPIO_PZ7,
- GPIO_PAA0, /* pin 208 */
- GPIO_PAA1,
- GPIO_PAA2,
- GPIO_PAA3,
- GPIO_PAA4,
- GPIO_PAA5,
- GPIO_PAA6,
- GPIO_PAA7,
- GPIO_PBB0, /* pin 216 */
- GPIO_PBB1,
- GPIO_PBB2,
- GPIO_PBB3,
- GPIO_PBB4,
- GPIO_PBB5,
- GPIO_PBB6,
- GPIO_PBB7, /* pin 223 */
-};
-
-/*
- * Tegra2-specific GPIO API
- */
-
-void gpio_info(void);
-
-#define gpio_status() gpio_info()
-#endif /* TEGRA_GPIO_H_ */
+++ /dev/null
-/*
- * Copyright (c) 2011, Google Inc. All rights reserved.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA2_MMC_H_
-#define _TEGRA2_MMC_H_
-
-int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
-
-#endif /* TEGRA2_MMC_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PINMUX_H_
-#define _PINMUX_H_
-
-/*
- * Pin groups which we adjust. There are three basic attributes of each pin
- * group which use this enum:
- *
- * - function
- * - pullup / pulldown
- * - tristate or normal
- */
-enum pmux_pingrp {
- /* APB_MISC_PP_TRISTATE_REG_A_0 */
- PINGRP_ATA,
- PINGRP_ATB,
- PINGRP_ATC,
- PINGRP_ATD,
- PINGRP_CDEV1,
- PINGRP_CDEV2,
- PINGRP_CSUS,
- PINGRP_DAP1,
-
- PINGRP_DAP2,
- PINGRP_DAP3,
- PINGRP_DAP4,
- PINGRP_DTA,
- PINGRP_DTB,
- PINGRP_DTC,
- PINGRP_DTD,
- PINGRP_DTE,
-
- PINGRP_GPU,
- PINGRP_GPV,
- PINGRP_I2CP,
- PINGRP_IRTX,
- PINGRP_IRRX,
- PINGRP_KBCB,
- PINGRP_KBCA,
- PINGRP_PMC,
-
- PINGRP_PTA,
- PINGRP_RM,
- PINGRP_KBCE,
- PINGRP_KBCF,
- PINGRP_GMA,
- PINGRP_GMC,
- PINGRP_SDIO1,
- PINGRP_OWC,
-
- /* 32: APB_MISC_PP_TRISTATE_REG_B_0 */
- PINGRP_GME,
- PINGRP_SDC,
- PINGRP_SDD,
- PINGRP_RESERVED0,
- PINGRP_SLXA,
- PINGRP_SLXC,
- PINGRP_SLXD,
- PINGRP_SLXK,
-
- PINGRP_SPDI,
- PINGRP_SPDO,
- PINGRP_SPIA,
- PINGRP_SPIB,
- PINGRP_SPIC,
- PINGRP_SPID,
- PINGRP_SPIE,
- PINGRP_SPIF,
-
- PINGRP_SPIG,
- PINGRP_SPIH,
- PINGRP_UAA,
- PINGRP_UAB,
- PINGRP_UAC,
- PINGRP_UAD,
- PINGRP_UCA,
- PINGRP_UCB,
-
- PINGRP_RESERVED1,
- PINGRP_ATE,
- PINGRP_KBCC,
- PINGRP_RESERVED2,
- PINGRP_RESERVED3,
- PINGRP_GMB,
- PINGRP_GMD,
- PINGRP_DDC,
-
- /* 64: APB_MISC_PP_TRISTATE_REG_C_0 */
- PINGRP_LD0,
- PINGRP_LD1,
- PINGRP_LD2,
- PINGRP_LD3,
- PINGRP_LD4,
- PINGRP_LD5,
- PINGRP_LD6,
- PINGRP_LD7,
-
- PINGRP_LD8,
- PINGRP_LD9,
- PINGRP_LD10,
- PINGRP_LD11,
- PINGRP_LD12,
- PINGRP_LD13,
- PINGRP_LD14,
- PINGRP_LD15,
-
- PINGRP_LD16,
- PINGRP_LD17,
- PINGRP_LHP0,
- PINGRP_LHP1,
- PINGRP_LHP2,
- PINGRP_LVP0,
- PINGRP_LVP1,
- PINGRP_HDINT,
-
- PINGRP_LM0,
- PINGRP_LM1,
- PINGRP_LVS,
- PINGRP_LSC0,
- PINGRP_LSC1,
- PINGRP_LSCK,
- PINGRP_LDC,
- PINGRP_LCSN,
-
- /* 96: APB_MISC_PP_TRISTATE_REG_D_0 */
- PINGRP_LSPI,
- PINGRP_LSDA,
- PINGRP_LSDI,
- PINGRP_LPW0,
- PINGRP_LPW1,
- PINGRP_LPW2,
- PINGRP_LDI,
- PINGRP_LHS,
-
- PINGRP_LPP,
- PINGRP_RESERVED4,
- PINGRP_KBCD,
- PINGRP_GPU7,
- PINGRP_DTF,
- PINGRP_UDA,
- PINGRP_CRTP,
- PINGRP_SDB,
-
- /* these pin groups only have pullup and pull down control */
- PINGRP_FIRST_NO_MUX,
- PINGRP_CK32 = PINGRP_FIRST_NO_MUX,
- PINGRP_DDRC,
- PINGRP_PMCA,
- PINGRP_PMCB,
- PINGRP_PMCC,
- PINGRP_PMCD,
- PINGRP_PMCE,
- PINGRP_XM2C,
- PINGRP_XM2D,
-
- PINGRP_COUNT,
-};
-
-/*
- * Functions which can be assigned to each of the pin groups. The values here
- * bear no relation to the values programmed into pinmux registers and are
- * purely a convenience. The translation is done through a table search.
- */
-enum pmux_func {
- PMUX_FUNC_AHB_CLK,
- PMUX_FUNC_APB_CLK,
- PMUX_FUNC_AUDIO_SYNC,
- PMUX_FUNC_CRT,
- PMUX_FUNC_DAP1,
- PMUX_FUNC_DAP2,
- PMUX_FUNC_DAP3,
- PMUX_FUNC_DAP4,
- PMUX_FUNC_DAP5,
- PMUX_FUNC_DISPA,
- PMUX_FUNC_DISPB,
- PMUX_FUNC_EMC_TEST0_DLL,
- PMUX_FUNC_EMC_TEST1_DLL,
- PMUX_FUNC_GMI,
- PMUX_FUNC_GMI_INT,
- PMUX_FUNC_HDMI,
- PMUX_FUNC_I2C,
- PMUX_FUNC_I2C2,
- PMUX_FUNC_I2C3,
- PMUX_FUNC_IDE,
- PMUX_FUNC_IRDA,
- PMUX_FUNC_KBC,
- PMUX_FUNC_MIO,
- PMUX_FUNC_MIPI_HS,
- PMUX_FUNC_NAND,
- PMUX_FUNC_OSC,
- PMUX_FUNC_OWR,
- PMUX_FUNC_PCIE,
- PMUX_FUNC_PLLA_OUT,
- PMUX_FUNC_PLLC_OUT1,
- PMUX_FUNC_PLLM_OUT1,
- PMUX_FUNC_PLLP_OUT2,
- PMUX_FUNC_PLLP_OUT3,
- PMUX_FUNC_PLLP_OUT4,
- PMUX_FUNC_PWM,
- PMUX_FUNC_PWR_INTR,
- PMUX_FUNC_PWR_ON,
- PMUX_FUNC_RTCK,
- PMUX_FUNC_SDIO1,
- PMUX_FUNC_SDIO2,
- PMUX_FUNC_SDIO3,
- PMUX_FUNC_SDIO4,
- PMUX_FUNC_SFLASH,
- PMUX_FUNC_SPDIF,
- PMUX_FUNC_SPI1,
- PMUX_FUNC_SPI2,
- PMUX_FUNC_SPI2_ALT,
- PMUX_FUNC_SPI3,
- PMUX_FUNC_SPI4,
- PMUX_FUNC_TRACE,
- PMUX_FUNC_TWC,
- PMUX_FUNC_UARTA,
- PMUX_FUNC_UARTB,
- PMUX_FUNC_UARTC,
- PMUX_FUNC_UARTD,
- PMUX_FUNC_UARTE,
- PMUX_FUNC_ULPI,
- PMUX_FUNC_VI,
- PMUX_FUNC_VI_SENSOR_CLK,
- PMUX_FUNC_XIO,
- PMUX_FUNC_SAFE,
-
- /* These don't have a name, but can be used in the table */
- PMUX_FUNC_RSVD1,
- PMUX_FUNC_RSVD2,
- PMUX_FUNC_RSVD3,
- PMUX_FUNC_RSVD4,
- PMUX_FUNC_RSVD, /* Not valid and should not be used */
-
- PMUX_FUNC_COUNT,
-
- PMUX_FUNC_NONE = -1,
-};
-
-/* return 1 if a pmux_func is in range */
-#define pmux_func_isvalid(func) ((func) >= 0 && (func) < PMUX_FUNC_COUNT && \
- (func) != PMUX_FUNC_RSVD)
-
-/* The pullup/pulldown state of a pin group */
-enum pmux_pull {
- PMUX_PULL_NORMAL = 0,
- PMUX_PULL_DOWN,
- PMUX_PULL_UP,
-};
-
-/* Defines whether a pin group is tristated or in normal operation */
-enum pmux_tristate {
- PMUX_TRI_NORMAL = 0,
- PMUX_TRI_TRISTATE = 1,
-};
-
-/* Available power domains used by pin groups */
-enum pmux_vddio {
- PMUX_VDDIO_BB = 0,
- PMUX_VDDIO_LCD,
- PMUX_VDDIO_VI,
- PMUX_VDDIO_UART,
- PMUX_VDDIO_DDR,
- PMUX_VDDIO_NAND,
- PMUX_VDDIO_SYS,
- PMUX_VDDIO_AUDIO,
- PMUX_VDDIO_SD,
-
- PMUX_VDDIO_NONE
-};
-
-enum {
- PMUX_TRISTATE_REGS = 4,
- PMUX_MUX_REGS = 7,
- PMUX_PULL_REGS = 5,
-};
-
-/* APB MISC Pin Mux and Tristate (APB_MISC_PP_) registers */
-struct pmux_tri_ctlr {
- uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */
- uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */
- uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */
- uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */
- uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */
- uint pmt_tri[PMUX_TRISTATE_REGS];/* _TRI_STATE_REG_A/B/C/D_0 14-20 */
- uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */
-
- uint pmt_reserved[22]; /* ABP_MISC_PP_ reserved offs 28-7C */
-
- uint pmt_ctl[PMUX_MUX_REGS]; /* _PIN_MUX_CTL_A-G_0, offset 80 */
- uint pmt_reserved4; /* ABP_MISC_PP_ reserved offset 9c */
- uint pmt_pull[PMUX_PULL_REGS]; /* APB_MISC_PP_PULLUPDOWN_REG_A-E */
-};
-
-/*
- * This defines the configuration for a pin, including the function assigned,
- * pull up/down settings and tristate settings. Having set up one of these
- * you can call pinmux_config_pingroup() to configure a pin in one step. Also
- * available is pinmux_config_table() to configure a list of pins.
- */
-struct pingroup_config {
- enum pmux_pingrp pingroup; /* pin group PINGRP_... */
- enum pmux_func func; /* function to assign FUNC_... */
- enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/
- enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */
-};
-
-/* Set a pin group to tristate */
-void pinmux_tristate_enable(enum pmux_pingrp pin);
-
-/* Set a pin group to normal (non tristate) */
-void pinmux_tristate_disable(enum pmux_pingrp pin);
-
-/* Set the pull up/down feature for a pin group */
-void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
-
-/* Set the mux function for a pin group */
-void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
-
-/* Set the complete configuration for a pin group */
-void pinmux_config_pingroup(struct pingroup_config *config);
-
-void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
-
-/**
- * Configuure a list of pin groups
- *
- * @param config List of config items
- * @param len Number of config items in list
- */
-void pinmux_config_table(struct pingroup_config *config, int len);
-
-#endif /* PINMUX_H */
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _PMC_H_
-#define _PMC_H_
-
-/* Power Management Controller (APBDEV_PMC_) registers */
-struct pmc_ctlr {
- uint pmc_cntrl; /* _CNTRL_0, offset 00 */
- uint pmc_sec_disable; /* _SEC_DISABLE_0, offset 04 */
- uint pmc_pmc_swrst; /* _PMC_SWRST_0, offset 08 */
- uint pmc_wake_mask; /* _WAKE_MASK_0, offset 0C */
- uint pmc_wake_lvl; /* _WAKE_LVL_0, offset 10 */
- uint pmc_wake_status; /* _WAKE_STATUS_0, offset 14 */
- uint pmc_sw_wake_status; /* _SW_WAKE_STATUS_0, offset 18 */
- uint pmc_dpd_pads_oride; /* _DPD_PADS_ORIDE_0, offset 1C */
- uint pmc_dpd_sample; /* _DPD_PADS_SAMPLE_0, offset 20 */
- uint pmc_dpd_enable; /* _DPD_PADS_ENABLE_0, offset 24 */
- uint pmc_pwrgate_timer_off; /* _PWRGATE_TIMER_OFF_0, offset 28 */
- uint pmc_pwrgate_timer_on; /* _PWRGATE_TIMER_ON_0, offset 2C */
- uint pmc_pwrgate_toggle; /* _PWRGATE_TOGGLE_0, offset 30 */
- uint pmc_remove_clamping; /* _REMOVE_CLAMPING_CMD_0, offset 34 */
- uint pmc_pwrgate_status; /* _PWRGATE_STATUS_0, offset 38 */
- uint pmc_pwrgood_timer; /* _PWRGOOD_TIMER_0, offset 3C */
- uint pmc_blink_timer; /* _BLINK_TIMER_0, offset 40 */
- uint pmc_no_iopower; /* _NO_IOPOWER_0, offset 44 */
- uint pmc_pwr_det; /* _PWR_DET_0, offset 48 */
- uint pmc_pwr_det_latch; /* _PWR_DET_LATCH_0, offset 4C */
-
- uint pmc_scratch0; /* _SCRATCH0_0, offset 50 */
- uint pmc_scratch1; /* _SCRATCH1_0, offset 54 */
- uint pmc_scratch2; /* _SCRATCH2_0, offset 58 */
- uint pmc_scratch3; /* _SCRATCH3_0, offset 5C */
- uint pmc_scratch4; /* _SCRATCH4_0, offset 60 */
- uint pmc_scratch5; /* _SCRATCH5_0, offset 64 */
- uint pmc_scratch6; /* _SCRATCH6_0, offset 68 */
- uint pmc_scratch7; /* _SCRATCH7_0, offset 6C */
- uint pmc_scratch8; /* _SCRATCH8_0, offset 70 */
- uint pmc_scratch9; /* _SCRATCH9_0, offset 74 */
- uint pmc_scratch10; /* _SCRATCH10_0, offset 78 */
- uint pmc_scratch11; /* _SCRATCH11_0, offset 7C */
- uint pmc_scratch12; /* _SCRATCH12_0, offset 80 */
- uint pmc_scratch13; /* _SCRATCH13_0, offset 84 */
- uint pmc_scratch14; /* _SCRATCH14_0, offset 88 */
- uint pmc_scratch15; /* _SCRATCH15_0, offset 8C */
- uint pmc_scratch16; /* _SCRATCH16_0, offset 90 */
- uint pmc_scratch17; /* _SCRATCH17_0, offset 94 */
- uint pmc_scratch18; /* _SCRATCH18_0, offset 98 */
- uint pmc_scratch19; /* _SCRATCH19_0, offset 9C */
- uint pmc_scratch20; /* _SCRATCH20_0, offset A0 */
- uint pmc_scratch21; /* _SCRATCH21_0, offset A4 */
- uint pmc_scratch22; /* _SCRATCH22_0, offset A8 */
- uint pmc_scratch23; /* _SCRATCH23_0, offset AC */
-
- uint pmc_secure_scratch0; /* _SECURE_SCRATCH0_0, offset B0 */
- uint pmc_secure_scratch1; /* _SECURE_SCRATCH1_0, offset B4 */
- uint pmc_secure_scratch2; /* _SECURE_SCRATCH2_0, offset B8 */
- uint pmc_secure_scratch3; /* _SECURE_SCRATCH3_0, offset BC */
- uint pmc_secure_scratch4; /* _SECURE_SCRATCH4_0, offset C0 */
- uint pmc_secure_scratch5; /* _SECURE_SCRATCH5_0, offset C4 */
-
- uint pmc_cpupwrgood_timer; /* _CPUPWRGOOD_TIMER_0, offset C8 */
- uint pmc_cpupwroff_timer; /* _CPUPWROFF_TIMER_0, offset CC */
- uint pmc_pg_mask; /* _PG_MASK_0, offset D0 */
- uint pmc_pg_mask_1; /* _PG_MASK_1_0, offset D4 */
- uint pmc_auto_wake_lvl; /* _AUTO_WAKE_LVL_0, offset D8 */
- uint pmc_auto_wake_lvl_mask; /* _AUTO_WAKE_LVL_MASK_0, offset DC */
- uint pmc_wake_delay; /* _WAKE_DELAY_0, offset E0 */
- uint pmc_pwr_det_val; /* _PWR_DET_VAL_0, offset E4 */
- uint pmc_ddr_pwr; /* _DDR_PWR_0, offset E8 */
- uint pmc_usb_debounce_del; /* _USB_DEBOUNCE_DEL_0, offset EC */
- uint pmc_usb_ao; /* _USB_AO_0, offset F0 */
- uint pmc_crypto_op; /* _CRYPTO_OP__0, offset F4 */
- uint pmc_pllp_wb0_override; /* _PLLP_WB0_OVERRIDE_0, offset F8 */
-
- uint pmc_scratch24; /* _SCRATCH24_0, offset FC */
- uint pmc_scratch25; /* _SCRATCH24_0, offset 100 */
- uint pmc_scratch26; /* _SCRATCH24_0, offset 104 */
- uint pmc_scratch27; /* _SCRATCH24_0, offset 108 */
- uint pmc_scratch28; /* _SCRATCH24_0, offset 10C */
- uint pmc_scratch29; /* _SCRATCH24_0, offset 110 */
- uint pmc_scratch30; /* _SCRATCH24_0, offset 114 */
- uint pmc_scratch31; /* _SCRATCH24_0, offset 118 */
- uint pmc_scratch32; /* _SCRATCH24_0, offset 11C */
- uint pmc_scratch33; /* _SCRATCH24_0, offset 120 */
- uint pmc_scratch34; /* _SCRATCH24_0, offset 124 */
- uint pmc_scratch35; /* _SCRATCH24_0, offset 128 */
- uint pmc_scratch36; /* _SCRATCH24_0, offset 12C */
- uint pmc_scratch37; /* _SCRATCH24_0, offset 130 */
- uint pmc_scratch38; /* _SCRATCH24_0, offset 134 */
- uint pmc_scratch39; /* _SCRATCH24_0, offset 138 */
- uint pmc_scratch40; /* _SCRATCH24_0, offset 13C */
- uint pmc_scratch41; /* _SCRATCH24_0, offset 140 */
- uint pmc_scratch42; /* _SCRATCH24_0, offset 144 */
-
- uint pmc_bo_mirror0; /* _BOUNDOUT_MIRROR0_0, offset 148 */
- uint pmc_bo_mirror1; /* _BOUNDOUT_MIRROR1_0, offset 14C */
- uint pmc_bo_mirror2; /* _BOUNDOUT_MIRROR2_0, offset 150 */
- uint pmc_sys_33v_en; /* _SYS_33V_EN_0, offset 154 */
- uint pmc_bo_mirror_access; /* _BOUNDOUT_MIRROR_ACCESS_0, off158 */
- uint pmc_gate; /* _GATE_0, offset 15C */
-};
-
-#define CPU_PWRED 1
-#define CPU_CLMP 1
-
-#define PARTID_CP 0xFFFFFFF8
-#define START_CP (1 << 8)
-
-#define CPUPWRREQ_OE (1 << 16)
-
-#endif /* PMC_H */
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ARCH_PMU_H_
-#define _ARCH_PMU_H_
-
-/* Set core and CPU voltages to nominal levels */
-int pmu_set_nominal(void);
-
-#endif /* _ARCH_PMU_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SCU_H_
-#define _SCU_H_
-
-/* ARM Snoop Control Unit (SCU) registers */
-struct scu_ctlr {
- uint scu_ctrl; /* SCU Control Register, offset 00 */
- uint scu_cfg; /* SCU Config Register, offset 04 */
- uint scu_cpu_pwr_stat; /* SCU CPU Power Status Register, offset 08 */
- uint scu_inv_all; /* SCU Invalidate All Register, offset 0C */
- uint scu_reserved0[12]; /* reserved, offset 10-3C */
- uint scu_filt_start; /* SCU Filtering Start Address Reg, offset 40 */
- uint scu_filt_end; /* SCU Filtering End Address Reg, offset 44 */
- uint scu_reserved1[2]; /* reserved, offset 48-4C */
- uint scu_acc_ctl; /* SCU Access Control Register, offset 50 */
- uint scu_ns_acc_ctl; /* SCU Non-secure Access Cntrl Reg, offset 54 */
-};
-
-#define SCU_CTRL_ENABLE (1 << 0)
-
-#endif /* SCU_H */
+++ /dev/null
-/*
- * (C) Copyright 2010, 2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SDRAM_PARAM_H_
-#define _SDRAM_PARAM_H_
-
-/*
- * Defines the number of 32-bit words provided in each set of SDRAM parameters
- * for arbitration configuration data.
- */
-#define BCT_SDRAM_ARB_CONFIG_WORDS 27
-
-enum memory_type {
- MEMORY_TYPE_NONE = 0,
- MEMORY_TYPE_DDR,
- MEMORY_TYPE_LPDDR,
- MEMORY_TYPE_DDR2,
- MEMORY_TYPE_LPDDR2,
- MEMORY_TYPE_NUM,
- MEMORY_TYPE_FORCE32 = 0x7FFFFFFF
-};
-
-/* Defines the SDRAM parameter structure */
-struct sdram_params {
- enum memory_type memory_type;
- u32 pllm_charge_pump_setup_control;
- u32 pllm_loop_filter_setup_control;
- u32 pllm_input_divider;
- u32 pllm_feedback_divider;
- u32 pllm_post_divider;
- u32 pllm_stable_time;
- u32 emc_clock_divider;
- u32 emc_auto_cal_interval;
- u32 emc_auto_cal_config;
- u32 emc_auto_cal_wait;
- u32 emc_pin_program_wait;
- u32 emc_rc;
- u32 emc_rfc;
- u32 emc_ras;
- u32 emc_rp;
- u32 emc_r2w;
- u32 emc_w2r;
- u32 emc_r2p;
- u32 emc_w2p;
- u32 emc_rd_rcd;
- u32 emc_wr_rcd;
- u32 emc_rrd;
- u32 emc_rext;
- u32 emc_wdv;
- u32 emc_quse;
- u32 emc_qrst;
- u32 emc_qsafe;
- u32 emc_rdv;
- u32 emc_refresh;
- u32 emc_burst_refresh_num;
- u32 emc_pdex2wr;
- u32 emc_pdex2rd;
- u32 emc_pchg2pden;
- u32 emc_act2pden;
- u32 emc_ar2pden;
- u32 emc_rw2pden;
- u32 emc_txsr;
- u32 emc_tcke;
- u32 emc_tfaw;
- u32 emc_trpab;
- u32 emc_tclkstable;
- u32 emc_tclkstop;
- u32 emc_trefbw;
- u32 emc_quseextra;
- u32 emc_fbioc_fg1;
- u32 emc_fbio_dqsib_dly;
- u32 emc_fbio_dqsib_dly_msb;
- u32 emc_fbio_quse_dly;
- u32 emc_fbio_quse_dly_msb;
- u32 emc_fbio_cfg5;
- u32 emc_fbio_cfg6;
- u32 emc_fbio_spare;
- u32 emc_mrs;
- u32 emc_emrs;
- u32 emc_mrw1;
- u32 emc_mrw2;
- u32 emc_mrw3;
- u32 emc_mrw_reset_command;
- u32 emc_mrw_reset_init_wait;
- u32 emc_adr_cfg;
- u32 emc_adr_cfg1;
- u32 emc_emem_cfg;
- u32 emc_low_latency_config;
- u32 emc_cfg;
- u32 emc_cfg2;
- u32 emc_dbg;
- u32 ahb_arbitration_xbar_ctrl;
- u32 emc_cfg_dig_dll;
- u32 emc_dll_xform_dqs;
- u32 emc_dll_xform_quse;
- u32 warm_boot_wait;
- u32 emc_ctt_term_ctrl;
- u32 emc_odt_write;
- u32 emc_odt_read;
- u32 emc_zcal_ref_cnt;
- u32 emc_zcal_wait_cnt;
- u32 emc_zcal_mrw_cmd;
- u32 emc_mrs_reset_dll;
- u32 emc_mrw_zq_init_dev0;
- u32 emc_mrw_zq_init_dev1;
- u32 emc_mrw_zq_init_wait;
- u32 emc_mrs_reset_dll_wait;
- u32 emc_emrs_emr2;
- u32 emc_emrs_emr3;
- u32 emc_emrs_ddr2_dll_enable;
- u32 emc_mrs_ddr2_dll_reset;
- u32 emc_emrs_ddr2_ocd_calib;
- u32 emc_edr2_wait;
- u32 emc_cfg_clktrim0;
- u32 emc_cfg_clktrim1;
- u32 emc_cfg_clktrim2;
- u32 pmc_ddr_pwr;
- u32 apb_misc_gp_xm2cfga_padctrl;
- u32 apb_misc_gp_xm2cfgc_padctrl;
- u32 apb_misc_gp_xm2cfgc_padctrl2;
- u32 apb_misc_gp_xm2cfgd_padctrl;
- u32 apb_misc_gp_xm2cfgd_padctrl2;
- u32 apb_misc_gp_xm2clkcfg_padctrl;
- u32 apb_misc_gp_xm2comp_padctrl;
- u32 apb_misc_gp_xm2vttgen_padctrl;
- u32 arbitration_config[BCT_SDRAM_ARB_CONFIG_WORDS];
-};
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SYS_PROTO_H_
-#define _SYS_PROTO_H_
-
-struct tegra2_sysinfo {
- char *board_string;
-};
-
-void invalidate_dcache(void);
-
-extern const struct tegra2_sysinfo sysinfo;
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA2_H_
-#define _TEGRA2_H_
-
-#define NV_PA_SDRAM_BASE 0x00000000
-#define NV_PA_ARM_PERIPHBASE 0x50040000
-#define NV_PA_PG_UP_BASE 0x60000000
-#define NV_PA_TMRUS_BASE 0x60005010
-#define NV_PA_CLK_RST_BASE 0x60006000
-#define NV_PA_FLOW_BASE 0x60007000
-#define NV_PA_GPIO_BASE 0x6000D000
-#define NV_PA_EVP_BASE 0x6000F000
-#define NV_PA_APB_MISC_BASE 0x70000000
-#define TEGRA2_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800)
-#define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000)
-#define NV_PA_APB_UARTB_BASE (NV_PA_APB_MISC_BASE + 0x6040)
-#define NV_PA_APB_UARTC_BASE (NV_PA_APB_MISC_BASE + 0x6200)
-#define NV_PA_APB_UARTD_BASE (NV_PA_APB_MISC_BASE + 0x6300)
-#define NV_PA_APB_UARTE_BASE (NV_PA_APB_MISC_BASE + 0x6400)
-#define TEGRA2_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380)
-#define TEGRA2_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400)
-#define TEGRA2_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800)
-#define NV_PA_CSITE_BASE 0x70040000
-#define TEGRA_USB1_BASE 0xC5000000
-#define TEGRA_USB3_BASE 0xC5008000
-#define TEGRA_USB_ADDR_MASK 0xFFFFC000
-
-#define TEGRA2_SDRC_CS0 NV_PA_SDRAM_BASE
-#define LOW_LEVEL_SRAM_STACK 0x4000FFFC
-#define EARLY_AVP_STACK (NV_PA_SDRAM_BASE + 0x20000)
-#define EARLY_CPU_STACK (EARLY_AVP_STACK - 4096)
-#define PG_UP_TAG_AVP 0xAAAAAAAA
-
-#ifndef __ASSEMBLY__
-struct timerus {
- unsigned int cntr_1us;
-};
-
-/* Address at which WB code runs, it must not overlap Bootrom's IRAM usage */
-#define AP20_WB_RUN_ADDRESS 0x40020000
-
-#define NVBOOTINFOTABLE_BCTSIZE 0x38 /* BCT size in BIT in IRAM */
-#define NVBOOTINFOTABLE_BCTPTR 0x3C /* BCT pointer in BIT in IRAM */
-#define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */
-
-/* These are the available SKUs (product types) for Tegra */
-enum {
- SKU_ID_T20 = 0x8,
- SKU_ID_T25SE = 0x14,
- SKU_ID_AP25 = 0x17,
- SKU_ID_T25 = 0x18,
- SKU_ID_AP25E = 0x1b,
- SKU_ID_T25E = 0x1c,
-};
-
-/* These are the SOC categories that affect clocking */
-enum {
- TEGRA_SOC_T20,
- TEGRA_SOC_T25,
-
- TEGRA_SOC_COUNT,
- TEGRA_SOC_UNKNOWN = -1,
-};
-
-#else /* __ASSEMBLY__ */
-#define PRM_RSTCTRL TEGRA2_PMC_BASE
-#endif
-
-#endif /* TEGRA2_H */
+++ /dev/null
-/*
- * NVIDIA Tegra2 I2C controller
- *
- * Copyright 2010-2011 NVIDIA Corporation
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA_I2C_H_
-#define _TEGRA_I2C_H_
-
-#include <asm/types.h>
-
-enum {
- I2C_TIMEOUT_USEC = 10000, /* Wait time for completion */
- I2C_FIFO_DEPTH = 8, /* I2C fifo depth */
-};
-
-enum i2c_transaction_flags {
- I2C_IS_WRITE = 0x1, /* for I2C write operation */
- I2C_IS_10_BIT_ADDRESS = 0x2, /* for 10-bit I2C slave address */
- I2C_USE_REPEATED_START = 0x4, /* for repeat start */
- I2C_NO_ACK = 0x8, /* for slave that won't generate ACK */
- I2C_SOFTWARE_CONTROLLER = 0x10, /* for I2C transfer using GPIO */
- I2C_NO_STOP = 0x20,
-};
-
-/* Contians the I2C transaction details */
-struct i2c_trans_info {
- /* flags to indicate the transaction details */
- enum i2c_transaction_flags flags;
- u32 address; /* I2C slave device address */
- u32 num_bytes; /* number of bytes to be transferred */
- /*
- * Send/receive buffer. For the I2C send operation this buffer should
- * be filled with the data to be sent to the slave device. For the I2C
- * receive operation this buffer is filled with the data received from
- * the slave device.
- */
- u8 *buf;
- int is_10bit_address;
-};
-
-struct i2c_control {
- u32 tx_fifo;
- u32 rx_fifo;
- u32 packet_status;
- u32 fifo_control;
- u32 fifo_status;
- u32 int_mask;
- u32 int_status;
-};
-
-struct dvc_ctlr {
- u32 ctrl1; /* 00: DVC_CTRL_REG1 */
- u32 ctrl2; /* 04: DVC_CTRL_REG2 */
- u32 ctrl3; /* 08: DVC_CTRL_REG3 */
- u32 status; /* 0C: DVC_STATUS_REG */
- u32 ctrl; /* 10: DVC_I2C_CTRL_REG */
- u32 addr_data; /* 14: DVC_I2C_ADDR_DATA_REG */
- u32 reserved_0[2]; /* 18: */
- u32 req; /* 20: DVC_REQ_REGISTER */
- u32 addr_data3; /* 24: DVC_I2C_ADDR_DATA_REG_3 */
- u32 reserved_1[6]; /* 28: */
- u32 cnfg; /* 40: DVC_I2C_CNFG */
- u32 cmd_addr0; /* 44: DVC_I2C_CMD_ADDR0 */
- u32 cmd_addr1; /* 48: DVC_I2C_CMD_ADDR1 */
- u32 cmd_data1; /* 4C: DVC_I2C_CMD_DATA1 */
- u32 cmd_data2; /* 50: DVC_I2C_CMD_DATA2 */
- u32 reserved_2[2]; /* 54: */
- u32 i2c_status; /* 5C: DVC_I2C_STATUS */
- struct i2c_control control; /* 60 ~ 78 */
-};
-
-struct i2c_ctlr {
- u32 cnfg; /* 00: I2C_I2C_CNFG */
- u32 cmd_addr0; /* 04: I2C_I2C_CMD_ADDR0 */
- u32 cmd_addr1; /* 08: I2C_I2C_CMD_DATA1 */
- u32 cmd_data1; /* 0C: I2C_I2C_CMD_DATA2 */
- u32 cmd_data2; /* 10: DVC_I2C_CMD_DATA2 */
- u32 reserved_0[2]; /* 14: */
- u32 status; /* 1C: I2C_I2C_STATUS */
- u32 sl_cnfg; /* 20: I2C_I2C_SL_CNFG */
- u32 sl_rcvd; /* 24: I2C_I2C_SL_RCVD */
- u32 sl_status; /* 28: I2C_I2C_SL_STATUS */
- u32 sl_addr1; /* 2C: I2C_I2C_SL_ADDR1 */
- u32 sl_addr2; /* 30: I2C_I2C_SL_ADDR2 */
- u32 reserved_1[2]; /* 34: */
- u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */
- u32 reserved_2[4]; /* 40: */
- struct i2c_control control; /* 50 ~ 68 */
-};
-
-/* bit fields definitions for IO Packet Header 1 format */
-#define PKT_HDR1_PROTOCOL_SHIFT 4
-#define PKT_HDR1_PROTOCOL_MASK (0xf << PKT_HDR1_PROTOCOL_SHIFT)
-#define PKT_HDR1_CTLR_ID_SHIFT 12
-#define PKT_HDR1_CTLR_ID_MASK (0xf << PKT_HDR1_CTLR_ID_SHIFT)
-#define PKT_HDR1_PKT_ID_SHIFT 16
-#define PKT_HDR1_PKT_ID_MASK (0xff << PKT_HDR1_PKT_ID_SHIFT)
-#define PROTOCOL_TYPE_I2C 1
-
-/* bit fields definitions for IO Packet Header 2 format */
-#define PKT_HDR2_PAYLOAD_SIZE_SHIFT 0
-#define PKT_HDR2_PAYLOAD_SIZE_MASK (0xfff << PKT_HDR2_PAYLOAD_SIZE_SHIFT)
-
-/* bit fields definitions for IO Packet Header 3 format */
-#define PKT_HDR3_READ_MODE_SHIFT 19
-#define PKT_HDR3_READ_MODE_MASK (1 << PKT_HDR3_READ_MODE_SHIFT)
-#define PKT_HDR3_SLAVE_ADDR_SHIFT 0
-#define PKT_HDR3_SLAVE_ADDR_MASK (0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT)
-
-#define DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT 26
-#define DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK \
- (1 << DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT)
-
-/* I2C_CNFG */
-#define I2C_CNFG_NEW_MASTER_FSM_SHIFT 11
-#define I2C_CNFG_NEW_MASTER_FSM_MASK (1 << I2C_CNFG_NEW_MASTER_FSM_SHIFT)
-#define I2C_CNFG_PACKET_MODE_SHIFT 10
-#define I2C_CNFG_PACKET_MODE_MASK (1 << I2C_CNFG_PACKET_MODE_SHIFT)
-
-/* I2C_SL_CNFG */
-#define I2C_SL_CNFG_NEWSL_SHIFT 2
-#define I2C_SL_CNFG_NEWSL_MASK (1 << I2C_SL_CNFG_NEWSL_SHIFT)
-
-/* I2C_FIFO_STATUS */
-#define TX_FIFO_FULL_CNT_SHIFT 0
-#define TX_FIFO_FULL_CNT_MASK (0xf << TX_FIFO_FULL_CNT_SHIFT)
-#define TX_FIFO_EMPTY_CNT_SHIFT 4
-#define TX_FIFO_EMPTY_CNT_MASK (0xf << TX_FIFO_EMPTY_CNT_SHIFT)
-
-/* I2C_INTERRUPT_STATUS */
-#define I2C_INT_XFER_COMPLETE_SHIFT 7
-#define I2C_INT_XFER_COMPLETE_MASK (1 << I2C_INT_XFER_COMPLETE_SHIFT)
-#define I2C_INT_NO_ACK_SHIFT 3
-#define I2C_INT_NO_ACK_MASK (1 << I2C_INT_NO_ACK_SHIFT)
-#define I2C_INT_ARBITRATION_LOST_SHIFT 2
-#define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT)
-
-/**
- * Returns the bus number of the DVC controller
- *
- * @return number of bus, or -1 if there is no DVC active
- */
-int tegra_i2c_get_dvc_bus_num(void);
-
-#endif
+++ /dev/null
-/*
- * NVIDIA Tegra2 SPI-FLASH controller
- *
- * Copyright 2010-2012 NVIDIA Corporation
- *
- * This software may be used and distributed according to the
- * terms of the GNU Public License, Version 2, incorporated
- * herein by reference.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA_SPI_H_
-#define _TEGRA_SPI_H_
-
-#include <asm/types.h>
-
-struct spi_tegra {
- u32 command; /* SPI_COMMAND_0 register */
- u32 status; /* SPI_STATUS_0 register */
- u32 rx_cmp; /* SPI_RX_CMP_0 register */
- u32 dma_ctl; /* SPI_DMA_CTL_0 register */
- u32 tx_fifo; /* SPI_TX_FIFO_0 register */
- u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */
- u32 rx_fifo; /* SPI_RX_FIFO_0 register */
-};
-
-#define SPI_CMD_GO (1 << 30)
-#define SPI_CMD_ACTIVE_SCLK_SHIFT 26
-#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
-#define SPI_CMD_CK_SDA (1 << 21)
-#define SPI_CMD_ACTIVE_SDA_SHIFT 18
-#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT)
-#define SPI_CMD_CS_POL (1 << 16)
-#define SPI_CMD_TXEN (1 << 15)
-#define SPI_CMD_RXEN (1 << 14)
-#define SPI_CMD_CS_VAL (1 << 13)
-#define SPI_CMD_CS_SOFT (1 << 12)
-#define SPI_CMD_CS_DELAY (1 << 9)
-#define SPI_CMD_CS3_EN (1 << 8)
-#define SPI_CMD_CS2_EN (1 << 7)
-#define SPI_CMD_CS1_EN (1 << 6)
-#define SPI_CMD_CS0_EN (1 << 5)
-#define SPI_CMD_BIT_LENGTH (1 << 4)
-#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F
-
-#define SPI_STAT_BSY (1 << 31)
-#define SPI_STAT_RDY (1 << 30)
-#define SPI_STAT_RXF_FLUSH (1 << 29)
-#define SPI_STAT_TXF_FLUSH (1 << 28)
-#define SPI_STAT_RXF_UNR (1 << 27)
-#define SPI_STAT_TXF_OVF (1 << 26)
-#define SPI_STAT_RXF_EMPTY (1 << 25)
-#define SPI_STAT_RXF_FULL (1 << 24)
-#define SPI_STAT_TXF_EMPTY (1 << 23)
-#define SPI_STAT_TXF_FULL (1 << 22)
-#define SPI_STAT_SEL_TXRX_N (1 << 16)
-#define SPI_STAT_CUR_BLKCNT (1 << 15)
-
-#define SPI_TIMEOUT 1000
-#define TEGRA2_SPI_MAX_FREQ 52000000
-
-#endif /* _TEGRA_SPI_H_ */
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Tegra2 timer functions */
-
-#ifndef _TEGRA2_TIMER_H
-#define _TEGRA2_TIMER_H
-
-/* returns the current monotonic timer value in microseconds */
-unsigned long timer_get_us(void);
-
-#endif
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _UART_SPI_SWITCH_H
-#define _UART_SPI_SWITCH_H
-
-#if defined(CONFIG_SPI_UART_SWITCH)
-/*
- * Signal that we are about to use the UART. This unfortunate hack is
- * required by Seaboard, which cannot use its console and SPI at the same
- * time! If the board file provides this, the board config will declare it.
- * Let this be a lesson for others.
- */
-void pinmux_select_uart(void);
-
-/*
- * Signal that we are about the use the SPI bus.
- */
-void pinmux_select_spi(void);
-
-#else /* not CONFIG_SPI_UART_SWITCH */
-
-static inline void pinmux_select_uart(void) {}
-static inline void pinmux_select_spi(void) {}
-
-#endif
-
-#endif
+++ /dev/null
-/*
- * (C) Copyright 2010,2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _UART_H_
-#define _UART_H_
-
-/* UART registers */
-struct uart_ctlr {
- uint uart_thr_dlab_0; /* UART_THR_DLAB_0_0, offset 00 */
- uint uart_ier_dlab_0; /* UART_IER_DLAB_0_0, offset 04 */
- uint uart_iir_fcr; /* UART_IIR_FCR_0, offset 08 */
- uint uart_lcr; /* UART_LCR_0, offset 0C */
- uint uart_mcr; /* UART_MCR_0, offset 10 */
- uint uart_lsr; /* UART_LSR_0, offset 14 */
- uint uart_msr; /* UART_MSR_0, offset 18 */
- uint uart_spr; /* UART_SPR_0, offset 1C */
- uint uart_irda_csr; /* UART_IRDA_CSR_0, offset 20 */
- uint uart_reserved[6]; /* Reserved, unused, offset 24-38*/
- uint uart_asr; /* UART_ASR_0, offset 3C */
-};
-
-#define NVRM_PLLP_FIXED_FREQ_KHZ 216000
-#define NV_DEFAULT_DEBUG_BAUD 115200
-
-#define UART_FCR_TRIGGER_3 0x30 /* Mask for trigger set at 3 */
-
-#endif /* UART_H */
+++ /dev/null
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _TEGRA_USB_H_
-#define _TEGRA_USB_H_
-
-
-/* USB Controller (USBx_CONTROLLER_) regs */
-struct usb_ctlr {
- /* 0x000 */
- uint id;
- uint reserved0;
- uint host;
- uint device;
-
- /* 0x010 */
- uint txbuf;
- uint rxbuf;
- uint reserved1[2];
-
- /* 0x020 */
- uint reserved2[56];
-
- /* 0x100 */
- u16 cap_length;
- u16 hci_version;
- uint hcs_params;
- uint hcc_params;
- uint reserved3[5];
-
- /* 0x120 */
- uint dci_version;
- uint dcc_params;
- uint reserved4[6];
-
- /* 0x140 */
- uint usb_cmd;
- uint usb_sts;
- uint usb_intr;
- uint frindex;
-
- /* 0x150 */
- uint reserved5;
- uint periodic_list_base;
- uint async_list_addr;
- uint async_tt_sts;
-
- /* 0x160 */
- uint burst_size;
- uint tx_fill_tuning;
- uint reserved6; /* is this port_sc1 on some controllers? */
- uint icusb_ctrl;
-
- /* 0x170 */
- uint ulpi_viewport;
- uint reserved7;
- uint endpt_nak;
- uint endpt_nak_enable;
-
- /* 0x180 */
- uint reserved;
- uint port_sc1;
- uint reserved8[6];
-
- /* 0x1a0 */
- uint reserved9;
- uint otgsc;
- uint usb_mode;
- uint endpt_setup_stat;
-
- /* 0x1b0 */
- uint reserved10[20];
-
- /* 0x200 */
- uint reserved11[0x80];
-
- /* 0x400 */
- uint susp_ctrl;
- uint phy_vbus_sensors;
- uint phy_vbus_wakeup_id;
- uint phy_alt_vbus_sys;
-
- /* 0x410 */
- uint usb1_legacy_ctrl;
- uint reserved12[3];
-
- /* 0x420 */
- uint reserved13[56];
-
- /* 0x500 */
- uint reserved14[64 * 3];
-
- /* 0x800 */
- uint utmip_pll_cfg0;
- uint utmip_pll_cfg1;
- uint utmip_xcvr_cfg0;
- uint utmip_bias_cfg0;
-
- /* 0x810 */
- uint utmip_hsrx_cfg0;
- uint utmip_hsrx_cfg1;
- uint utmip_fslsrx_cfg0;
- uint utmip_fslsrx_cfg1;
-
- /* 0x820 */
- uint utmip_tx_cfg0;
- uint utmip_misc_cfg0;
- uint utmip_misc_cfg1;
- uint utmip_debounce_cfg0;
-
- /* 0x830 */
- uint utmip_bat_chrg_cfg0;
- uint utmip_spare_cfg0;
- uint utmip_xcvr_cfg1;
- uint utmip_bias_cfg1;
-};
-
-
-/* USB1_LEGACY_CTRL */
-#define USB1_NO_LEGACY_MODE 1
-
-#define VBUS_SENSE_CTL_SHIFT 1
-#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT)
-#define VBUS_SENSE_CTL_VBUS_WAKEUP 0
-#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1
-#define VBUS_SENSE_CTL_AB_SESS_VLD 2
-#define VBUS_SENSE_CTL_A_SESS_VLD 3
-
-/* USBx_IF_USB_SUSP_CTRL_0 */
-#define UTMIP_PHY_ENB (1 << 12)
-#define UTMIP_RESET (1 << 11)
-#define USB_PHY_CLK_VALID (1 << 7)
-
-/* USBx_UTMIP_MISC_CFG1 */
-#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
-#define UTMIP_PLLU_STABLE_COUNT_MASK \
- (0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
-#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18
-#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \
- (0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
-#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30)
-
-/* USBx_UTMIP_PLL_CFG1_0 */
-#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
-#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
- (0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
-#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
-#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
-
-/* USBx_UTMIP_BIAS_CFG1_0 */
-#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
-#define UTMIP_BIAS_PDTRK_COUNT_MASK \
- (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
-
-#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
-#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
-
-/* USBx_UTMIP_TX_CFG0_0 */
-#define UTMIP_FS_PREAMBLE_J (1 << 19)
-
-/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
-#define UTMIP_PD_CHRG 1
-
-/* USBx_UTMIP_XCVR_CFG0_0 */
-#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
-
-/* USBx_UTMIP_SPARE_CFG0_0 */
-#define FUSE_SETUP_SEL (1 << 3)
-
-/* USBx_UTMIP_HSRX_CFG0_0 */
-#define UTMIP_IDLE_WAIT_SHIFT 15
-#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT)
-#define UTMIP_ELASTIC_LIMIT_SHIFT 10
-#define UTMIP_ELASTIC_LIMIT_MASK \
- (0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
-
-/* USBx_UTMIP_HSRX_CFG0_1 */
-#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
-#define UTMIP_HS_SYNC_START_DLY_MASK \
- (0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
-
-/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
-#define IC_ENB1 (1 << 3)
-
-/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
-#define PTS_SHIFT 30
-#define PTS_MASK (3U << PTS_SHIFT)
-#define PTS_UTMI 0
-#define PTS_RESERVED 1
-#define PTS_ULP 2
-#define PTS_ICUSB_SER 3
-
-#define STS (1 << 29)
-
-/* USBx_UTMIP_XCVR_CFG0_0 */
-#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
-#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
-#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
-
-/* USBx_UTMIP_XCVR_CFG1_0 */
-#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
-#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
-#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
-
-/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
-#define VBUS_VLD_STS (1 << 26)
-
-
-/* Change the USB host port into host mode */
-void usb_set_host_mode(void);
-
-/* Setup USB on the board */
-int board_usb_init(const void *blob);
-
-/**
- * Start up the given port number (ports are numbered from 0 on each board).
- * This returns values for the appropriate hccr and hcor addresses to use for
- * USB EHCI operations.
- *
- * @param portnum port number to start
- * @param hccr returns start address of EHCI HCCR registers
- * @param hcor returns start address of EHCI HCOR registers
- * @return 0 if ok, -1 on error (generally invalid port number)
- */
-int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor);
-
-/**
- * Stop the current port
- *
- * @return 0 if ok, -1 if no port was active
- */
-int tegrausb_stop_port(void);
-
-#endif /* _TEGRA_USB_H_ */
+++ /dev/null
-/*
- * (C) Copyright 2010, 2011
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _WARM_BOOT_H_
-#define _WARM_BOOT_H_
-
-#define STRAP_OPT_A_RAM_CODE_SHIFT 4
-#define STRAP_OPT_A_RAM_CODE_MASK (0xf << STRAP_OPT_A_RAM_CODE_SHIFT)
-
-/* Defines the supported operating modes */
-enum fuse_operating_mode {
- MODE_PRODUCTION = 3,
- MODE_UNDEFINED,
-};
-
-/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */
-enum {
- HASH_LENGTH = 4
-};
-
-/* Defines the storage for a hash value (128 bits) */
-struct hash {
- u32 hash[HASH_LENGTH];
-};
-
-/*
- * Defines the code header information for the boot rom.
- *
- * The code immediately follows the code header.
- *
- * Note that the code header needs to be 16 bytes aligned to preserve
- * the alignment of relevant data for hash and decryption computations without
- * requiring extra copies to temporary memory areas.
- */
-struct wb_header {
- u32 length_insecure; /* length of the code header */
- u32 reserved[3];
- struct hash hash; /* hash of header+code, starts next field*/
- struct hash random_aes_block; /* a data block to aid security. */
- u32 length_secure; /* length of the code header */
- u32 destination; /* destination address to put the wb code */
- u32 entry_point; /* execution address of the wb code */
- u32 code_length; /* length of the code */
-};
-
-/*
- * The warm boot code needs direct access to these registers since it runs in
- * SRAM and cannot call other U-Boot code.
- */
-union osc_ctrl_reg {
- struct {
- u32 xoe:1;
- u32 xobp:1;
- u32 reserved0:2;
- u32 xofs:6;
- u32 reserved1:2;
- u32 xods:5;
- u32 reserved2:3;
- u32 oscfi_spare:8;
- u32 pll_ref_div:2;
- u32 osc_freq:2;
- };
- u32 word;
-};
-
-union pllx_base_reg {
- struct {
- u32 divm:5;
- u32 reserved0:3;
- u32 divn:10;
- u32 reserved1:2;
- u32 divp:3;
- u32 reserved2:4;
- u32 lock:1;
- u32 reserved3:1;
- u32 ref_dis:1;
- u32 enable:1;
- u32 bypass:1;
- };
- u32 word;
-};
-
-union pllx_misc_reg {
- struct {
- u32 vcocon:4;
- u32 lfcon:4;
- u32 cpcon:4;
- u32 lock_sel:6;
- u32 reserved0:1;
- u32 lock_enable:1;
- u32 reserved1:1;
- u32 dccon:1;
- u32 pts:2;
- u32 reserved2:6;
- u32 out1_div_byp:1;
- u32 out1_inv_clk:1;
- };
- u32 word;
-};
-
-/*
- * TODO: This register is not documented in the TRM yet. We could move this
- * into the EMC and give it a proper interface, but not while it is
- * undocumented.
- */
-union scratch3_reg {
- struct {
- u32 pllx_base_divm:5;
- u32 pllx_base_divn:10;
- u32 pllx_base_divp:3;
- u32 pllx_misc_lfcon:4;
- u32 pllx_misc_cpcon:4;
- };
- u32 word;
-};
-
-
-/**
- * Save warmboot memory settings for a later resume
- *
- * @return 0 if ok, -1 on error
- */
-int warmboot_save_sdram_params(void);
-
-int warmboot_prepare_code(u32 seg_address, u32 seg_length);
-int sign_data_block(u8 *source, u32 length, u8 *signature);
-void wb_start(void); /* Start of WB assembly code */
-void wb_end(void); /* End of WB assembly code */
-
-#endif
--- /dev/null
+/*
+ * (C) Copyright 2010-2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <asm/types.h>
+
+/* Stabilization delays, in usec */
+#define PLL_STABILIZATION_DELAY (300)
+#define IO_STABILIZATION_DELAY (1000)
+
+#define NVBL_PLLP_KHZ (216000)
+
+#define PLLX_ENABLED (1 << 30)
+#define CCLK_BURST_POLICY 0x20008888
+#define SUPER_CCLK_DIVIDER 0x80000000
+
+/* Calculate clock fractional divider value from ref and target frequencies */
+#define CLK_DIVIDER(REF, FREQ) ((((REF) * 2) / FREQ) - 2)
+
+/* Calculate clock frequency value from reference and clock divider value */
+#define CLK_FREQUENCY(REF, REG) (((REF) * 2) / (REG + 2))
+
+/* AVP/CPU ID */
+#define PG_UP_TAG_0_PID_CPU 0x55555555 /* CPU aka "a9" aka "mpcore" */
+#define PG_UP_TAG_0 0x0
+
+#define CORESIGHT_UNLOCK 0xC5ACCE55;
+
+/* AP20-Specific Base Addresses */
+
+/* AP20 Base physical address of SDRAM. */
+#define AP20_BASE_PA_SDRAM 0x00000000
+/* AP20 Base physical address of internal SRAM. */
+#define AP20_BASE_PA_SRAM 0x40000000
+/* AP20 Size of internal SRAM (256KB). */
+#define AP20_BASE_PA_SRAM_SIZE 0x00040000
+/* AP20 Base physical address of flash. */
+#define AP20_BASE_PA_NOR_FLASH 0xD0000000
+/* AP20 Base physical address of boot information table. */
+#define AP20_BASE_PA_BOOT_INFO AP20_BASE_PA_SRAM
+
+/*
+ * Super-temporary stacks for EXTREMELY early startup. The values chosen for
+ * these addresses must be valid on ALL SOCs because this value is used before
+ * we are able to differentiate between the SOC types.
+ *
+ * NOTE: The since CPU's stack will eventually be moved from IRAM to SDRAM, its
+ * stack is placed below the AVP stack. Once the CPU stack has been moved,
+ * the AVP is free to use the IRAM the CPU stack previously occupied if
+ * it should need to do so.
+ *
+ * NOTE: In multi-processor CPU complex configurations, each processor will have
+ * its own stack of size CPU_EARLY_BOOT_STACK_SIZE. CPU 0 will have a
+ * limit of CPU_EARLY_BOOT_STACK_LIMIT. Each successive CPU will have a
+ * stack limit that is CPU_EARLY_BOOT_STACK_SIZE less then the previous
+ * CPU.
+ */
+
+/* Common AVP early boot stack limit */
+#define AVP_EARLY_BOOT_STACK_LIMIT \
+ (AP20_BASE_PA_SRAM + (AP20_BASE_PA_SRAM_SIZE/2))
+/* Common AVP early boot stack size */
+#define AVP_EARLY_BOOT_STACK_SIZE 0x1000
+/* Common CPU early boot stack limit */
+#define CPU_EARLY_BOOT_STACK_LIMIT \
+ (AVP_EARLY_BOOT_STACK_LIMIT - AVP_EARLY_BOOT_STACK_SIZE)
+/* Common CPU early boot stack size */
+#define CPU_EARLY_BOOT_STACK_SIZE 0x1000
+
+#define EXCEP_VECTOR_CPU_RESET_VECTOR (NV_PA_EVP_BASE + 0x100)
+#define CSITE_CPU_DBG0_LAR (NV_PA_CSITE_BASE + 0x10FB0)
+#define CSITE_CPU_DBG1_LAR (NV_PA_CSITE_BASE + 0x12FB0)
+
+#define FLOW_CTLR_HALT_COP_EVENTS (NV_PA_FLOW_BASE + 4)
+#define FLOW_MODE_STOP 2
+#define HALT_COP_EVENT_JTAG (1 << 28)
+#define HALT_COP_EVENT_IRQ_1 (1 << 11)
+#define HALT_COP_EVENT_FIQ_1 (1 << 9)
+
+/* Start up the tegra20 SOC */
+void tegra20_start(void);
+
+/* This is the main entry into U-Boot, used by the Cortex-A9 */
+extern void _start(void);
+
+/**
+ * Works out the SOC type used for clocks settings
+ *
+ * @return SOC type - see TEGRA_SOC...
+ */
+int tegra_get_chip_type(void);
--- /dev/null
+/*
+ * Copyright (c) 2012 The Chromium OS Authors.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _GP_PADCTRL_H_
+#define _GP_PADCTRL_H_
+
+/* APB_MISC_PP registers */
+struct apb_misc_pp_ctlr {
+ u32 reserved0[2];
+ u32 strapping_opt_a;/* 0x08: APB_MISC_PP_STRAPPING_OPT_A */
+};
+
+/* bit fields definitions for APB_MISC_PP_STRAPPING_OPT_A register */
+#define RAM_CODE_SHIFT 4
+#define RAM_CODE_MASK (0xf << RAM_CODE_SHIFT)
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_BOARD_H_
+#define _TEGRA_BOARD_H_
+
+/* Setup UARTs for the board according to the selected config */
+void board_init_uart_f(void);
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _CLK_RST_H_
+#define _CLK_RST_H_
+
+/* PLL registers - there are several PLLs in the clock controller */
+struct clk_pll {
+ uint pll_base; /* the control register */
+ uint pll_out; /* output control */
+ uint reserved;
+ uint pll_misc; /* other misc things */
+};
+
+/* PLL registers - there are several PLLs in the clock controller */
+struct clk_pll_simple {
+ uint pll_base; /* the control register */
+ uint pll_misc; /* other misc things */
+};
+
+/*
+ * Most PLLs use the clk_pll structure, but some have a simpler two-member
+ * structure for which we use clk_pll_simple. The reason for this non-
+ * othogonal setup is not stated.
+ */
+enum {
+ TEGRA_CLK_PLLS = 6, /* Number of normal PLLs */
+ TEGRA_CLK_SIMPLE_PLLS = 3, /* Number of simple PLLs */
+ TEGRA_CLK_REGS = 3, /* Number of clock enable registers */
+ TEGRA_CLK_SOURCES = 64, /* Number of peripheral clock sources */
+};
+
+/* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */
+struct clk_rst_ctlr {
+ uint crc_rst_src; /* _RST_SOURCE_0,0x00 */
+ uint crc_rst_dev[TEGRA_CLK_REGS]; /* _RST_DEVICES_L/H/U_0 */
+ uint crc_clk_out_enb[TEGRA_CLK_REGS]; /* _CLK_OUT_ENB_L/H/U_0 */
+ uint crc_reserved0; /* reserved_0, 0x1C */
+ uint crc_cclk_brst_pol; /* _CCLK_BURST_POLICY_0,0x20 */
+ uint crc_super_cclk_div; /* _SUPER_CCLK_DIVIDER_0,0x24 */
+ uint crc_sclk_brst_pol; /* _SCLK_BURST_POLICY_0, 0x28 */
+ uint crc_super_sclk_div; /* _SUPER_SCLK_DIVIDER_0,0x2C */
+ uint crc_clk_sys_rate; /* _CLK_SYSTEM_RATE_0, 0x30 */
+ uint crc_prog_dly_clk; /* _PROG_DLY_CLK_0, 0x34 */
+ uint crc_aud_sync_clk_rate; /* _AUDIO_SYNC_CLK_RATE_0,0x38 */
+ uint crc_reserved1; /* reserved_1, 0x3C */
+ uint crc_cop_clk_skip_plcy; /* _COP_CLK_SKIP_POLICY_0,0x40 */
+ uint crc_clk_mask_arm; /* _CLK_MASK_ARM_0, 0x44 */
+ uint crc_misc_clk_enb; /* _MISC_CLK_ENB_0, 0x48 */
+ uint crc_clk_cpu_cmplx; /* _CLK_CPU_CMPLX_0, 0x4C */
+ uint crc_osc_ctrl; /* _OSC_CTRL_0, 0x50 */
+ uint crc_pll_lfsr; /* _PLL_LFSR_0, 0x54 */
+ uint crc_osc_freq_det; /* _OSC_FREQ_DET_0, 0x58 */
+ uint crc_osc_freq_det_stat; /* _OSC_FREQ_DET_STATUS_0,0x5C */
+ uint crc_reserved2[8]; /* reserved_2[8], 0x60-7C */
+
+ struct clk_pll crc_pll[TEGRA_CLK_PLLS]; /* PLLs from 0x80 to 0xdc */
+
+ /* PLLs from 0xe0 to 0xf4 */
+ struct clk_pll_simple crc_pll_simple[TEGRA_CLK_SIMPLE_PLLS];
+
+ uint crc_reserved10; /* _reserved_10, 0xF8 */
+ uint crc_reserved11; /* _reserved_11, 0xFC */
+
+ uint crc_clk_src[TEGRA_CLK_SOURCES]; /*_I2S1_0... 0x100-1fc */
+ uint crc_reserved20[80]; /* 0x200-33C */
+ uint crc_cpu_cmplx_set; /* _CPU_CMPLX_SET_0, 0x340 */
+ uint crc_cpu_cmplx_clr; /* _CPU_CMPLX_CLR_0, 0x344 */
+};
+
+/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
+#define CPU1_CLK_STP_SHIFT 9
+
+#define CPU0_CLK_STP_SHIFT 8
+#define CPU0_CLK_STP_MASK (1U << CPU0_CLK_STP_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLx_BASE_0 */
+#define PLL_BYPASS_SHIFT 31
+#define PLL_BYPASS_MASK (1U << PLL_BYPASS_SHIFT)
+
+#define PLL_ENABLE_SHIFT 30
+#define PLL_ENABLE_MASK (1U << PLL_ENABLE_SHIFT)
+
+#define PLL_BASE_OVRRIDE_MASK (1U << 28)
+
+#define PLL_DIVP_SHIFT 20
+#define PLL_DIVP_MASK (7U << PLL_DIVP_SHIFT)
+
+#define PLL_DIVN_SHIFT 8
+#define PLL_DIVN_MASK (0x3ffU << PLL_DIVN_SHIFT)
+
+#define PLL_DIVM_SHIFT 0
+#define PLL_DIVM_MASK (0x1f << PLL_DIVM_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLx_MISC_0 */
+#define PLL_CPCON_SHIFT 8
+#define PLL_CPCON_MASK (15U << PLL_CPCON_SHIFT)
+
+#define PLL_LFCON_SHIFT 4
+#define PLL_LFCON_MASK (15U << PLL_LFCON_SHIFT)
+
+#define PLLU_VCO_FREQ_SHIFT 20
+#define PLLU_VCO_FREQ_MASK (1U << PLLU_VCO_FREQ_SHIFT)
+
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT 30
+#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT)
+#define OSC_XOBP_SHIFT 1
+#define OSC_XOBP_MASK (1U << OSC_XOBP_SHIFT)
+
+/*
+ * CLK_RST_CONTROLLER_CLK_SOURCE_x_OUT_0 - the mask here is normally 8 bits
+ * but can be 16. We could use knowledge we have to restrict the mask in
+ * the 8-bit cases (the divider_bits value returned by
+ * get_periph_clock_source()) but it does not seem worth it since the code
+ * already checks the ranges of values it is writing, in clk_get_divider().
+ */
+#define OUT_CLK_DIVISOR_SHIFT 0
+#define OUT_CLK_DIVISOR_MASK (0xffff << OUT_CLK_DIVISOR_SHIFT)
+
+#define OUT_CLK_SOURCE_SHIFT 30
+#define OUT_CLK_SOURCE_MASK (3U << OUT_CLK_SOURCE_SHIFT)
+
+#define OUT_CLK_SOURCE4_SHIFT 28
+#define OUT_CLK_SOURCE4_MASK (15U << OUT_CLK_SOURCE4_SHIFT)
+
+#endif /* CLK_RST_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra2 clock control functions */
+
+#ifndef _CLOCK_H
+#define _CLOCK_H
+
+/* Set of oscillator frequencies supported in the internal API. */
+enum clock_osc_freq {
+ /* All in MHz, so 13_0 is 13.0MHz */
+ CLOCK_OSC_FREQ_13_0,
+ CLOCK_OSC_FREQ_19_2,
+ CLOCK_OSC_FREQ_12_0,
+ CLOCK_OSC_FREQ_26_0,
+
+ CLOCK_OSC_FREQ_COUNT,
+};
+
+/* The PLLs supported by the hardware */
+enum clock_id {
+ CLOCK_ID_FIRST,
+ CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
+ CLOCK_ID_MEMORY,
+ CLOCK_ID_PERIPH,
+ CLOCK_ID_AUDIO,
+ CLOCK_ID_USB,
+ CLOCK_ID_DISPLAY,
+
+ /* now the simple ones */
+ CLOCK_ID_FIRST_SIMPLE,
+ CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
+ CLOCK_ID_EPCI,
+ CLOCK_ID_SFROM32KHZ,
+
+ /* These are the base clocks (inputs to the Tegra SOC) */
+ CLOCK_ID_32KHZ,
+ CLOCK_ID_OSC,
+
+ CLOCK_ID_COUNT, /* number of clocks */
+ CLOCK_ID_NONE = -1,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+ PERIPH_ID_FIRST,
+
+ /* Low word: 31:0 */
+ PERIPH_ID_CPU = PERIPH_ID_FIRST,
+ PERIPH_ID_RESERVED1,
+ PERIPH_ID_RESERVED2,
+ PERIPH_ID_AC97,
+ PERIPH_ID_RTC,
+ PERIPH_ID_TMR,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+
+ /* 8 */
+ PERIPH_ID_GPIO,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SPDIF,
+ PERIPH_ID_I2S1,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_NDFLASH,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC4,
+
+ /* 16 */
+ PERIPH_ID_TWC,
+ PERIPH_ID_PWM,
+ PERIPH_ID_I2S2,
+ PERIPH_ID_EPP,
+ PERIPH_ID_VI,
+ PERIPH_ID_2D,
+ PERIPH_ID_USBD,
+ PERIPH_ID_ISP,
+
+ /* 24 */
+ PERIPH_ID_3D,
+ PERIPH_ID_IDE,
+ PERIPH_ID_DISP2,
+ PERIPH_ID_DISP1,
+ PERIPH_ID_HOST1X,
+ PERIPH_ID_VCP,
+ PERIPH_ID_RESERVED30,
+ PERIPH_ID_CACHE2,
+
+ /* Middle word: 63:32 */
+ PERIPH_ID_MEM,
+ PERIPH_ID_AHBDMA,
+ PERIPH_ID_APBDMA,
+ PERIPH_ID_RESERVED35,
+ PERIPH_ID_KBC,
+ PERIPH_ID_STAT_MON,
+ PERIPH_ID_PMC,
+ PERIPH_ID_FUSE,
+
+ /* 40 */
+ PERIPH_ID_KFUSE,
+ PERIPH_ID_SBC1,
+ PERIPH_ID_SNOR,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SBC2,
+ PERIPH_ID_XIO,
+ PERIPH_ID_SBC3,
+ PERIPH_ID_DVC_I2C,
+
+ /* 48 */
+ PERIPH_ID_DSI,
+ PERIPH_ID_TVO,
+ PERIPH_ID_MIPI,
+ PERIPH_ID_HDMI,
+ PERIPH_ID_CSI,
+ PERIPH_ID_TVDAC,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_UART3,
+
+ /* 56 */
+ PERIPH_ID_RESERVED56,
+ PERIPH_ID_EMC,
+ PERIPH_ID_USB2,
+ PERIPH_ID_USB3,
+ PERIPH_ID_MPE,
+ PERIPH_ID_VDE,
+ PERIPH_ID_BSEA,
+ PERIPH_ID_BSEV,
+
+ /* Upper word 95:64 */
+ PERIPH_ID_SPEEDO,
+ PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
+ PERIPH_ID_I2C3,
+ PERIPH_ID_SBC4,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_PCIE,
+ PERIPH_ID_OWR,
+
+ /* 72 */
+ PERIPH_ID_AFI,
+ PERIPH_ID_CORESIGHT,
+ PERIPH_ID_RESERVED74,
+ PERIPH_ID_AVPUCQ,
+ PERIPH_ID_RESERVED76,
+ PERIPH_ID_RESERVED77,
+ PERIPH_ID_RESERVED78,
+ PERIPH_ID_RESERVED79,
+
+ /* 80 */
+ PERIPH_ID_RESERVED80,
+ PERIPH_ID_RESERVED81,
+ PERIPH_ID_RESERVED82,
+ PERIPH_ID_RESERVED83,
+ PERIPH_ID_IRAMA,
+ PERIPH_ID_IRAMB,
+ PERIPH_ID_IRAMC,
+ PERIPH_ID_IRAMD,
+
+ /* 88 */
+ PERIPH_ID_CRAM2,
+
+ PERIPH_ID_COUNT,
+ PERIPH_ID_NONE = -1,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */
+#define PERIPH_REG(id) ((id) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range, and not a simple PLL */
+#define clock_id_is_pll(id) ((id) >= CLOCK_ID_FIRST && \
+ (id) < CLOCK_ID_FIRST_SIMPLE)
+
+/* PLL stabilization delay in usec */
+#define CLOCK_PLL_STABLE_DELAY_US 300
+
+/* return the current oscillator clock frequency */
+enum clock_osc_freq clock_get_osc_freq(void);
+
+/**
+ * Start PLL using the provided configuration parameters.
+ *
+ * @param id clock id
+ * @param divm input divider
+ * @param divn feedback divider
+ * @param divp post divider 2^n
+ * @param cpcon charge pump setup control
+ * @param lfcon loop filter setup control
+ *
+ * @returns monotonic time in us that the PLL will be stable
+ */
+unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn,
+ u32 divp, u32 cpcon, u32 lfcon);
+
+/**
+ * Read low-level parameters of a PLL.
+ *
+ * @param id clock id to read (note: USB is not supported)
+ * @param divm returns input divider
+ * @param divn returns feedback divider
+ * @param divp returns post divider 2^n
+ * @param cpcon returns charge pump setup control
+ * @param lfcon returns loop filter setup control
+ *
+ * @returns 0 if ok, -1 on error (invalid clock id)
+ */
+int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
+ u32 *divp, u32 *cpcon, u32 *lfcon);
+
+/*
+ * Enable a clock
+ *
+ * @param id clock id
+ */
+void clock_enable(enum periph_id clkid);
+
+/*
+ * Disable a clock
+ *
+ * @param id clock id
+ */
+void clock_disable(enum periph_id clkid);
+
+/*
+ * Set whether a clock is enabled or disabled.
+ *
+ * @param id clock id
+ * @param enable 1 to enable, 0 to disable
+ */
+void clock_set_enable(enum periph_id clkid, int enable);
+
+/**
+ * Reset a peripheral. This puts it in reset, waits for a delay, then takes
+ * it out of reset and waits for th delay again.
+ *
+ * @param periph_id peripheral to reset
+ * @param us_delay time to delay in microseconds
+ */
+void reset_periph(enum periph_id periph_id, int us_delay);
+
+/**
+ * Put a peripheral into or out of reset.
+ *
+ * @param periph_id peripheral to reset
+ * @param enable 1 to put into reset, 0 to take out of reset
+ */
+void reset_set_enable(enum periph_id periph_id, int enable);
+
+
+/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */
+enum crc_reset_id {
+ /* Things we can hold in reset for each CPU */
+ crc_rst_cpu = 1,
+ crc_rst_de = 1 << 2, /* What is de? */
+ crc_rst_watchdog = 1 << 3,
+ crc_rst_debug = 1 << 4,
+};
+
+/**
+ * Put parts of the CPU complex into or out of reset.\
+ *
+ * @param cpu cpu number (0 or 1 on Tegra2)
+ * @param which which parts of the complex to affect (OR of crc_reset_id)
+ * @param reset 1 to assert reset, 0 to de-assert
+ */
+void reset_cmplx_set_enable(int cpu, int which, int reset);
+
+/**
+ * Set the source for a peripheral clock. This plus the divisor sets the
+ * clock rate. You need to look up the datasheet to see the meaning of the
+ * source parameter as it changes for each peripheral.
+ *
+ * Warning: This function is only for use pre-relocation. Please use
+ * clock_start_periph_pll() instead.
+ *
+ * @param periph_id peripheral to adjust
+ * @param source source clock (0, 1, 2 or 3)
+ */
+void clock_ll_set_source(enum periph_id periph_id, unsigned source);
+
+/**
+ * Set the source and divisor for a peripheral clock. This sets the
+ * clock rate. You need to look up the datasheet to see the meaning of the
+ * source parameter as it changes for each peripheral.
+ *
+ * Warning: This function is only for use pre-relocation. Please use
+ * clock_start_periph_pll() instead.
+ *
+ * @param periph_id peripheral to adjust
+ * @param source source clock (0, 1, 2 or 3)
+ * @param divisor divisor value to use
+ */
+void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
+ unsigned divisor);
+
+/**
+ * Start a peripheral PLL clock at the given rate. This also resets the
+ * peripheral.
+ *
+ * @param periph_id peripheral to start
+ * @param parent PLL id of required parent clock
+ * @param rate Required clock rate in Hz
+ * @return rate selected in Hz, or -1U if something went wrong
+ */
+unsigned clock_start_periph_pll(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate);
+
+/**
+ * Returns the rate of a peripheral clock in Hz. Since the caller almost
+ * certainly knows the parent clock (having just set it) we require that
+ * this be passed in so we don't need to work it out.
+ *
+ * @param periph_id peripheral to start
+ * @param parent PLL id of parent clock (used to calculate rate, you
+ * must know this!)
+ * @return clock rate of peripheral in Hz
+ */
+unsigned long clock_get_periph_rate(enum periph_id periph_id,
+ enum clock_id parent);
+
+/**
+ * Adjust peripheral PLL clock to the given rate. This does not reset the
+ * peripheral. If a second stage divisor is not available, pass NULL for
+ * extra_div. If it is available, then this parameter will return the
+ * divisor selected (which will be a power of 2 from 1 to 256).
+ *
+ * @param periph_id peripheral to start
+ * @param parent PLL id of required parent clock
+ * @param rate Required clock rate in Hz
+ * @param extra_div value for the second-stage divisor (NULL if one is
+ not available)
+ * @return rate selected in Hz, or -1U if something went wrong
+ */
+unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
+ enum clock_id parent, unsigned rate, int *extra_div);
+
+/**
+ * Returns the clock rate of a specified clock, in Hz.
+ *
+ * @param parent PLL id of clock to check
+ * @return rate of clock in Hz
+ */
+unsigned clock_get_rate(enum clock_id clkid);
+
+/**
+ * Start up a UART using low-level calls
+ *
+ * Prior to relocation clock_start_periph_pll() cannot be called. This
+ * function provides a way to set up a UART using low-level calls which
+ * do not require BSS.
+ *
+ * @param periph_id Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1)
+ */
+void clock_ll_start_uart(enum periph_id periph_id);
+
+/**
+ * Decode a peripheral ID from a device tree node.
+ *
+ * This works by looking up the peripheral's 'clocks' node and reading out
+ * the second cell, which is the clock number / peripheral ID.
+ *
+ * @param blob FDT blob to use
+ * @param node Node to look at
+ * @return peripheral ID, or PERIPH_ID_NONE if none
+ */
+enum periph_id clock_decode_periph_id(const void *blob, int node);
+
+/**
+ * Checks if the oscillator bypass is enabled (XOBP bit)
+ *
+ * @return 1 if bypass is enabled, 0 if not
+ */
+int clock_get_osc_bypass(void);
+
+/*
+ * Checks that clocks are valid and prints a warning if not
+ *
+ * @return 0 if ok, -1 on error
+ */
+int clock_verify(void);
+
+/* Initialize the clocks */
+void clock_init(void);
+
+/* Initialize the PLLs */
+void clock_early_init(void);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ARCH_EMC_H_
+#define _ARCH_EMC_H_
+
+#include <asm/types.h>
+
+#define TEGRA_EMC_NUM_REGS 46
+
+/* EMC Registers */
+struct emc_ctlr {
+ u32 cfg; /* 0x00: EMC_CFG */
+ u32 reserved0[3]; /* 0x04 ~ 0x0C */
+ u32 adr_cfg; /* 0x10: EMC_ADR_CFG */
+ u32 adr_cfg1; /* 0x14: EMC_ADR_CFG_1 */
+ u32 reserved1[2]; /* 0x18 ~ 0x18 */
+ u32 refresh_ctrl; /* 0x20: EMC_REFCTRL */
+ u32 pin; /* 0x24: EMC_PIN */
+ u32 timing_ctrl; /* 0x28: EMC_TIMING_CONTROL */
+ u32 rc; /* 0x2C: EMC_RC */
+ u32 rfc; /* 0x30: EMC_RFC */
+ u32 ras; /* 0x34: EMC_RAS */
+ u32 rp; /* 0x38: EMC_RP */
+ u32 r2w; /* 0x3C: EMC_R2W */
+ u32 w2r; /* 0x40: EMC_W2R */
+ u32 r2p; /* 0x44: EMC_R2P */
+ u32 w2p; /* 0x48: EMC_W2P */
+ u32 rd_rcd; /* 0x4C: EMC_RD_RCD */
+ u32 wd_rcd; /* 0x50: EMC_WD_RCD */
+ u32 rrd; /* 0x54: EMC_RRD */
+ u32 rext; /* 0x58: EMC_REXT */
+ u32 wdv; /* 0x5C: EMC_WDV */
+ u32 quse; /* 0x60: EMC_QUSE */
+ u32 qrst; /* 0x64: EMC_QRST */
+ u32 qsafe; /* 0x68: EMC_QSAFE */
+ u32 rdv; /* 0x6C: EMC_RDV */
+ u32 refresh; /* 0x70: EMC_REFRESH */
+ u32 burst_refresh_num; /* 0x74: EMC_BURST_REFRESH_NUM */
+ u32 pdex2wr; /* 0x78: EMC_PDEX2WR */
+ u32 pdex2rd; /* 0x7c: EMC_PDEX2RD */
+ u32 pchg2pden; /* 0x80: EMC_PCHG2PDEN */
+ u32 act2pden; /* 0x84: EMC_ACT2PDEN */
+ u32 ar2pden; /* 0x88: EMC_AR2PDEN */
+ u32 rw2pden; /* 0x8C: EMC_RW2PDEN */
+ u32 txsr; /* 0x90: EMC_TXSR */
+ u32 tcke; /* 0x94: EMC_TCKE */
+ u32 tfaw; /* 0x98: EMC_TFAW */
+ u32 trpab; /* 0x9C: EMC_TRPAB */
+ u32 tclkstable; /* 0xA0: EMC_TCLKSTABLE */
+ u32 tclkstop; /* 0xA4: EMC_TCLKSTOP */
+ u32 trefbw; /* 0xA8: EMC_TREFBW */
+ u32 quse_extra; /* 0xAC: EMC_QUSE_EXTRA */
+ u32 odt_write; /* 0xB0: EMC_ODT_WRITE */
+ u32 odt_read; /* 0xB4: EMC_ODT_READ */
+ u32 reserved2[5]; /* 0xB8 ~ 0xC8 */
+ u32 mrs; /* 0xCC: EMC_MRS */
+ u32 emrs; /* 0xD0: EMC_EMRS */
+ u32 ref; /* 0xD4: EMC_REF */
+ u32 pre; /* 0xD8: EMC_PRE */
+ u32 nop; /* 0xDC: EMC_NOP */
+ u32 self_ref; /* 0xE0: EMC_SELF_REF */
+ u32 dpd; /* 0xE4: EMC_DPD */
+ u32 mrw; /* 0xE8: EMC_MRW */
+ u32 mrr; /* 0xEC: EMC_MRR */
+ u32 reserved3; /* 0xF0: */
+ u32 fbio_cfg1; /* 0xF4: EMC_FBIO_CFG1 */
+ u32 fbio_dqsib_dly; /* 0xF8: EMC_FBIO_DQSIB_DLY */
+ u32 fbio_dqsib_dly_msb; /* 0xFC: EMC_FBIO_DQSIB_DLY_MSG */
+ u32 fbio_spare; /* 0x100: SBIO_SPARE */
+ /* There are more registers ... */
+};
+
+/**
+ * Set up the EMC for the given rate. The timing parameters are retrieved
+ * from the device tree "nvidia,tegra20-emc" node and its
+ * "nvidia,tegra20-emc-table" sub-nodes.
+ *
+ * @param blob Device tree blob
+ * @param rate Clock speed of memory controller in Hz (=2x memory bus rate)
+ * @return 0 if ok, else -ve error code (look in emc.c to decode it)
+ */
+int tegra_set_emc(const void *blob, unsigned rate);
+
+/**
+ * Get a pointer to the EMC controller from the device tree.
+ *
+ * @param blob Device tree blob
+ * @return pointer to EMC controller
+ */
+struct emc_ctlr *emc_get_controller(const void *blob);
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _FLOW_H_
+#define _FLOW_H_
+
+struct flow_ctlr {
+ u32 halt_cpu_events;
+ u32 halt_cop_events;
+ u32 cpu_csr;
+ u32 cop_csr;
+ u32 halt_cpu1_events;
+ u32 cpu1_csr;
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra20 high-level function multiplexing */
+
+#ifndef __FUNCMUX_H
+#define __FUNCMUX_H
+
+/* Configs supported by the func mux */
+enum {
+ FUNCMUX_DEFAULT = 0, /* default config */
+
+ /* UART configs */
+ FUNCMUX_UART1_IRRX_IRTX = 0,
+ FUNCMUX_UART1_UAA_UAB,
+ FUNCMUX_UART1_GPU,
+ FUNCMUX_UART1_SDIO1,
+ FUNCMUX_UART2_IRDA = 0,
+ FUNCMUX_UART4_GMC = 0,
+
+ /* I2C configs */
+ FUNCMUX_DVC_I2CP = 0,
+ FUNCMUX_I2C1_RM = 0,
+ FUNCMUX_I2C2_DDC = 0,
+ FUNCMUX_I2C2_PTA,
+ FUNCMUX_I2C3_DTF = 0,
+
+ /* SDMMC configs */
+ FUNCMUX_SDMMC1_SDIO1_4BIT = 0,
+ FUNCMUX_SDMMC2_DTA_DTD_8BIT = 0,
+ FUNCMUX_SDMMC3_SDB_4BIT = 0,
+ FUNCMUX_SDMMC3_SDB_SLXA_8BIT,
+ FUNCMUX_SDMMC4_ATC_ATD_8BIT = 0,
+ FUNCMUX_SDMMC4_ATB_GMA_4_BIT,
+ FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT,
+
+ /* USB configs */
+ FUNCMUX_USB2_ULPI = 0,
+
+ /* Serial Flash configs */
+ FUNCMUX_SPI1_GMC_GMD = 0,
+};
+
+/**
+ * Select a config for a particular peripheral.
+ *
+ * Each peripheral can operate through a number of configurations,
+ * which are sets of pins that it uses to bring out its signals.
+ * The basic config is 0, and higher numbers indicate different
+ * pinmux settings to bring the peripheral out on other pins,
+ *
+ * This function also disables tristate for the function's pins,
+ * so that they operate in normal mode.
+ *
+ * @param id Peripheral id
+ * @param config Configuration to use (FUNCMUX_...), 0 for default
+ * @return 0 if ok, -1 on error (e.g. incorrect id or config)
+ */
+int funcmux_select(enum periph_id id, int config);
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _FUSE_H_
+#define _FUSE_H_
+
+/* FUSE registers */
+struct fuse_regs {
+ u32 reserved0[64]; /* 0x00 - 0xFC: */
+ u32 production_mode; /* 0x100: FUSE_PRODUCTION_MODE */
+ u32 reserved1[3]; /* 0x104 - 0x10c: */
+ u32 sku_info; /* 0x110 */
+ u32 reserved2[13]; /* 0x114 - 0x144: */
+ u32 fa; /* 0x148: FUSE_FA */
+ u32 reserved3[21]; /* 0x14C - 0x19C: */
+ u32 security_mode; /* 0x1A0: FUSE_SECURITY_MODE */
+};
+
+#endif /* ifndef _FUSE_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _GP_PADCTRL_H_
+#define _GP_PADCTRL_H_
+
+/* APB_MISC_GP and padctrl registers */
+struct apb_misc_gp_ctlr {
+ u32 modereg; /* 0x00: APB_MISC_GP_MODEREG */
+ u32 hidrev; /* 0x04: APB_MISC_GP_HIDREV */
+ u32 reserved0[22]; /* 0x08 - 0x5C: */
+ u32 emu_revid; /* 0x60: APB_MISC_GP_EMU_REVID */
+ u32 xactor_scratch; /* 0x64: APB_MISC_GP_XACTOR_SCRATCH */
+ u32 aocfg1; /* 0x68: APB_MISC_GP_AOCFG1PADCTRL */
+ u32 aocfg2; /* 0x6c: APB_MISC_GP_AOCFG2PADCTRL */
+ u32 atcfg1; /* 0x70: APB_MISC_GP_ATCFG1PADCTRL */
+ u32 atcfg2; /* 0x74: APB_MISC_GP_ATCFG2PADCTRL */
+ u32 cdevcfg1; /* 0x78: APB_MISC_GP_CDEV1CFGPADCTRL */
+ u32 cdevcfg2; /* 0x7C: APB_MISC_GP_CDEV2CFGPADCTRL */
+ u32 csuscfg; /* 0x80: APB_MISC_GP_CSUSCFGPADCTRL */
+ u32 dap1cfg; /* 0x84: APB_MISC_GP_DAP1CFGPADCTRL */
+ u32 dap2cfg; /* 0x88: APB_MISC_GP_DAP2CFGPADCTRL */
+ u32 dap3cfg; /* 0x8C: APB_MISC_GP_DAP3CFGPADCTRL */
+ u32 dap4cfg; /* 0x90: APB_MISC_GP_DAP4CFGPADCTRL */
+ u32 dbgcfg; /* 0x94: APB_MISC_GP_DBGCFGPADCTRL */
+ u32 lcdcfg1; /* 0x98: APB_MISC_GP_LCDCFG1PADCTRL */
+ u32 lcdcfg2; /* 0x9C: APB_MISC_GP_LCDCFG2PADCTRL */
+ u32 sdmmc2_cfg; /* 0xA0: APB_MISC_GP_SDMMC2CFGPADCTRL */
+ u32 sdmmc3_cfg; /* 0xA4: APB_MISC_GP_SDMMC3CFGPADCTRL */
+ u32 spicfg; /* 0xA8: APB_MISC_GP_SPICFGPADCTRL */
+ u32 uaacfg; /* 0xAC: APB_MISC_GP_UAACFGPADCTRL */
+ u32 uabcfg; /* 0xB0: APB_MISC_GP_UABCFGPADCTRL */
+ u32 uart2cfg; /* 0xB4: APB_MISC_GP_UART2CFGPADCTRL */
+ u32 uart3cfg; /* 0xB8: APB_MISC_GP_UART3CFGPADCTRL */
+ u32 vicfg1; /* 0xBC: APB_MISC_GP_VICFG1PADCTRL */
+ u32 vicfg2; /* 0xC0: APB_MISC_GP_VICFG2PADCTRL */
+ u32 xm2cfga; /* 0xC4: APB_MISC_GP_XM2CFGAPADCTRL */
+ u32 xm2cfgc; /* 0xC8: APB_MISC_GP_XM2CFGCPADCTRL */
+ u32 xm2cfgd; /* 0xCC: APB_MISC_GP_XM2CFGDPADCTRL */
+ u32 xm2clkcfg; /* 0xD0: APB_MISC_GP_XM2CLKCFGPADCTRL */
+ u32 memcomp; /* 0xD4: APB_MISC_GP_MEMCOMPPADCTRL */
+};
+
+/* bit fields definitions for APB_MISC_GP_HIDREV register */
+#define HIDREV_CHIPID_SHIFT 8
+#define HIDREV_CHIPID_MASK (0xff << HIDREV_CHIPID_SHIFT)
+#define HIDREV_MAJORPREV_SHIFT 4
+#define HIDREV_MAJORPREV_MASK (0xf << HIDREV_MAJORPREV_SHIFT)
+
+/* CHIPID field returned from APB_MISC_GP_HIDREV register */
+#define CHIPID_TEGRA20 0x20
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011, Google Inc. All rights reserved.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ * Portions Copyright 2011-2012 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_GPIO_H_
+#define _TEGRA_GPIO_H_
+
+/*
+ * The Tegra 2x GPIO controller has 224 GPIOs arranged in 7 banks of 4 ports,
+ * each with 8 GPIOs.
+ */
+#define TEGRA_GPIO_PORTS 4 /* number of ports per bank */
+#define TEGRA_GPIO_BANKS 7 /* number of banks */
+#define MAX_NUM_GPIOS (TEGRA_GPIO_PORTS * TEGRA_GPIO_BANKS * 8)
+#define GPIO_NAME_SIZE 20 /* gpio_request max label len */
+
+/* GPIO Controller registers for a single bank */
+struct gpio_ctlr_bank {
+ uint gpio_config[TEGRA_GPIO_PORTS];
+ uint gpio_dir_out[TEGRA_GPIO_PORTS];
+ uint gpio_out[TEGRA_GPIO_PORTS];
+ uint gpio_in[TEGRA_GPIO_PORTS];
+ uint gpio_int_status[TEGRA_GPIO_PORTS];
+ uint gpio_int_enable[TEGRA_GPIO_PORTS];
+ uint gpio_int_level[TEGRA_GPIO_PORTS];
+ uint gpio_int_clear[TEGRA_GPIO_PORTS];
+};
+
+struct gpio_ctlr {
+ struct gpio_ctlr_bank gpio_bank[TEGRA_GPIO_BANKS];
+};
+
+#define GPIO_BANK(x) ((x) >> 5)
+#define GPIO_PORT(x) (((x) >> 3) & 0x3)
+#define GPIO_FULLPORT(x) ((x) >> 3)
+#define GPIO_BIT(x) ((x) & 0x7)
+
+enum gpio_pin {
+ GPIO_PA0 = 0, /* pin 0 */
+ GPIO_PA1,
+ GPIO_PA2,
+ GPIO_PA3,
+ GPIO_PA4,
+ GPIO_PA5,
+ GPIO_PA6,
+ GPIO_PA7,
+ GPIO_PB0, /* pin 8 */
+ GPIO_PB1,
+ GPIO_PB2,
+ GPIO_PB3,
+ GPIO_PB4,
+ GPIO_PB5,
+ GPIO_PB6,
+ GPIO_PB7,
+ GPIO_PC0, /* pin 16 */
+ GPIO_PC1,
+ GPIO_PC2,
+ GPIO_PC3,
+ GPIO_PC4,
+ GPIO_PC5,
+ GPIO_PC6,
+ GPIO_PC7,
+ GPIO_PD0, /* pin 24 */
+ GPIO_PD1,
+ GPIO_PD2,
+ GPIO_PD3,
+ GPIO_PD4,
+ GPIO_PD5,
+ GPIO_PD6,
+ GPIO_PD7,
+ GPIO_PE0, /* pin 32 */
+ GPIO_PE1,
+ GPIO_PE2,
+ GPIO_PE3,
+ GPIO_PE4,
+ GPIO_PE5,
+ GPIO_PE6,
+ GPIO_PE7,
+ GPIO_PF0, /* pin 40 */
+ GPIO_PF1,
+ GPIO_PF2,
+ GPIO_PF3,
+ GPIO_PF4,
+ GPIO_PF5,
+ GPIO_PF6,
+ GPIO_PF7,
+ GPIO_PG0, /* pin 48 */
+ GPIO_PG1,
+ GPIO_PG2,
+ GPIO_PG3,
+ GPIO_PG4,
+ GPIO_PG5,
+ GPIO_PG6,
+ GPIO_PG7,
+ GPIO_PH0, /* pin 56 */
+ GPIO_PH1,
+ GPIO_PH2,
+ GPIO_PH3,
+ GPIO_PH4,
+ GPIO_PH5,
+ GPIO_PH6,
+ GPIO_PH7,
+ GPIO_PI0, /* pin 64 */
+ GPIO_PI1,
+ GPIO_PI2,
+ GPIO_PI3,
+ GPIO_PI4,
+ GPIO_PI5,
+ GPIO_PI6,
+ GPIO_PI7,
+ GPIO_PJ0, /* pin 72 */
+ GPIO_PJ1,
+ GPIO_PJ2,
+ GPIO_PJ3,
+ GPIO_PJ4,
+ GPIO_PJ5,
+ GPIO_PJ6,
+ GPIO_PJ7,
+ GPIO_PK0, /* pin 80 */
+ GPIO_PK1,
+ GPIO_PK2,
+ GPIO_PK3,
+ GPIO_PK4,
+ GPIO_PK5,
+ GPIO_PK6,
+ GPIO_PK7,
+ GPIO_PL0, /* pin 88 */
+ GPIO_PL1,
+ GPIO_PL2,
+ GPIO_PL3,
+ GPIO_PL4,
+ GPIO_PL5,
+ GPIO_PL6,
+ GPIO_PL7,
+ GPIO_PM0, /* pin 96 */
+ GPIO_PM1,
+ GPIO_PM2,
+ GPIO_PM3,
+ GPIO_PM4,
+ GPIO_PM5,
+ GPIO_PM6,
+ GPIO_PM7,
+ GPIO_PN0, /* pin 104 */
+ GPIO_PN1,
+ GPIO_PN2,
+ GPIO_PN3,
+ GPIO_PN4,
+ GPIO_PN5,
+ GPIO_PN6,
+ GPIO_PN7,
+ GPIO_PO0, /* pin 112 */
+ GPIO_PO1,
+ GPIO_PO2,
+ GPIO_PO3,
+ GPIO_PO4,
+ GPIO_PO5,
+ GPIO_PO6,
+ GPIO_PO7,
+ GPIO_PP0, /* pin 120 */
+ GPIO_PP1,
+ GPIO_PP2,
+ GPIO_PP3,
+ GPIO_PP4,
+ GPIO_PP5,
+ GPIO_PP6,
+ GPIO_PP7,
+ GPIO_PQ0, /* pin 128 */
+ GPIO_PQ1,
+ GPIO_PQ2,
+ GPIO_PQ3,
+ GPIO_PQ4,
+ GPIO_PQ5,
+ GPIO_PQ6,
+ GPIO_PQ7,
+ GPIO_PR0, /* pin 136 */
+ GPIO_PR1,
+ GPIO_PR2,
+ GPIO_PR3,
+ GPIO_PR4,
+ GPIO_PR5,
+ GPIO_PR6,
+ GPIO_PR7,
+ GPIO_PS0, /* pin 144 */
+ GPIO_PS1,
+ GPIO_PS2,
+ GPIO_PS3,
+ GPIO_PS4,
+ GPIO_PS5,
+ GPIO_PS6,
+ GPIO_PS7,
+ GPIO_PT0, /* pin 152 */
+ GPIO_PT1,
+ GPIO_PT2,
+ GPIO_PT3,
+ GPIO_PT4,
+ GPIO_PT5,
+ GPIO_PT6,
+ GPIO_PT7,
+ GPIO_PU0, /* pin 160 */
+ GPIO_PU1,
+ GPIO_PU2,
+ GPIO_PU3,
+ GPIO_PU4,
+ GPIO_PU5,
+ GPIO_PU6,
+ GPIO_PU7,
+ GPIO_PV0, /* pin 168 */
+ GPIO_PV1,
+ GPIO_PV2,
+ GPIO_PV3,
+ GPIO_PV4,
+ GPIO_PV5,
+ GPIO_PV6,
+ GPIO_PV7,
+ GPIO_PW0, /* pin 176 */
+ GPIO_PW1,
+ GPIO_PW2,
+ GPIO_PW3,
+ GPIO_PW4,
+ GPIO_PW5,
+ GPIO_PW6,
+ GPIO_PW7,
+ GPIO_PX0, /* pin 184 */
+ GPIO_PX1,
+ GPIO_PX2,
+ GPIO_PX3,
+ GPIO_PX4,
+ GPIO_PX5,
+ GPIO_PX6,
+ GPIO_PX7,
+ GPIO_PY0, /* pin 192 */
+ GPIO_PY1,
+ GPIO_PY2,
+ GPIO_PY3,
+ GPIO_PY4,
+ GPIO_PY5,
+ GPIO_PY6,
+ GPIO_PY7,
+ GPIO_PZ0, /* pin 200 */
+ GPIO_PZ1,
+ GPIO_PZ2,
+ GPIO_PZ3,
+ GPIO_PZ4,
+ GPIO_PZ5,
+ GPIO_PZ6,
+ GPIO_PZ7,
+ GPIO_PAA0, /* pin 208 */
+ GPIO_PAA1,
+ GPIO_PAA2,
+ GPIO_PAA3,
+ GPIO_PAA4,
+ GPIO_PAA5,
+ GPIO_PAA6,
+ GPIO_PAA7,
+ GPIO_PBB0, /* pin 216 */
+ GPIO_PBB1,
+ GPIO_PBB2,
+ GPIO_PBB3,
+ GPIO_PBB4,
+ GPIO_PBB5,
+ GPIO_PBB6,
+ GPIO_PBB7, /* pin 223 */
+};
+
+/*
+ * Tegra20-specific GPIO API
+ */
+
+void gpio_info(void);
+
+#define gpio_status() gpio_info()
+#endif /* TEGRA_GPIO_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2011, Google Inc. All rights reserved.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA20_MMC_H_
+#define _TEGRA20_MMC_H_
+
+int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio);
+
+#endif /* TEGRA20_MMC_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PINMUX_H_
+#define _PINMUX_H_
+
+/*
+ * Pin groups which we adjust. There are three basic attributes of each pin
+ * group which use this enum:
+ *
+ * - function
+ * - pullup / pulldown
+ * - tristate or normal
+ */
+enum pmux_pingrp {
+ /* APB_MISC_PP_TRISTATE_REG_A_0 */
+ PINGRP_ATA,
+ PINGRP_ATB,
+ PINGRP_ATC,
+ PINGRP_ATD,
+ PINGRP_CDEV1,
+ PINGRP_CDEV2,
+ PINGRP_CSUS,
+ PINGRP_DAP1,
+
+ PINGRP_DAP2,
+ PINGRP_DAP3,
+ PINGRP_DAP4,
+ PINGRP_DTA,
+ PINGRP_DTB,
+ PINGRP_DTC,
+ PINGRP_DTD,
+ PINGRP_DTE,
+
+ PINGRP_GPU,
+ PINGRP_GPV,
+ PINGRP_I2CP,
+ PINGRP_IRTX,
+ PINGRP_IRRX,
+ PINGRP_KBCB,
+ PINGRP_KBCA,
+ PINGRP_PMC,
+
+ PINGRP_PTA,
+ PINGRP_RM,
+ PINGRP_KBCE,
+ PINGRP_KBCF,
+ PINGRP_GMA,
+ PINGRP_GMC,
+ PINGRP_SDIO1,
+ PINGRP_OWC,
+
+ /* 32: APB_MISC_PP_TRISTATE_REG_B_0 */
+ PINGRP_GME,
+ PINGRP_SDC,
+ PINGRP_SDD,
+ PINGRP_RESERVED0,
+ PINGRP_SLXA,
+ PINGRP_SLXC,
+ PINGRP_SLXD,
+ PINGRP_SLXK,
+
+ PINGRP_SPDI,
+ PINGRP_SPDO,
+ PINGRP_SPIA,
+ PINGRP_SPIB,
+ PINGRP_SPIC,
+ PINGRP_SPID,
+ PINGRP_SPIE,
+ PINGRP_SPIF,
+
+ PINGRP_SPIG,
+ PINGRP_SPIH,
+ PINGRP_UAA,
+ PINGRP_UAB,
+ PINGRP_UAC,
+ PINGRP_UAD,
+ PINGRP_UCA,
+ PINGRP_UCB,
+
+ PINGRP_RESERVED1,
+ PINGRP_ATE,
+ PINGRP_KBCC,
+ PINGRP_RESERVED2,
+ PINGRP_RESERVED3,
+ PINGRP_GMB,
+ PINGRP_GMD,
+ PINGRP_DDC,
+
+ /* 64: APB_MISC_PP_TRISTATE_REG_C_0 */
+ PINGRP_LD0,
+ PINGRP_LD1,
+ PINGRP_LD2,
+ PINGRP_LD3,
+ PINGRP_LD4,
+ PINGRP_LD5,
+ PINGRP_LD6,
+ PINGRP_LD7,
+
+ PINGRP_LD8,
+ PINGRP_LD9,
+ PINGRP_LD10,
+ PINGRP_LD11,
+ PINGRP_LD12,
+ PINGRP_LD13,
+ PINGRP_LD14,
+ PINGRP_LD15,
+
+ PINGRP_LD16,
+ PINGRP_LD17,
+ PINGRP_LHP0,
+ PINGRP_LHP1,
+ PINGRP_LHP2,
+ PINGRP_LVP0,
+ PINGRP_LVP1,
+ PINGRP_HDINT,
+
+ PINGRP_LM0,
+ PINGRP_LM1,
+ PINGRP_LVS,
+ PINGRP_LSC0,
+ PINGRP_LSC1,
+ PINGRP_LSCK,
+ PINGRP_LDC,
+ PINGRP_LCSN,
+
+ /* 96: APB_MISC_PP_TRISTATE_REG_D_0 */
+ PINGRP_LSPI,
+ PINGRP_LSDA,
+ PINGRP_LSDI,
+ PINGRP_LPW0,
+ PINGRP_LPW1,
+ PINGRP_LPW2,
+ PINGRP_LDI,
+ PINGRP_LHS,
+
+ PINGRP_LPP,
+ PINGRP_RESERVED4,
+ PINGRP_KBCD,
+ PINGRP_GPU7,
+ PINGRP_DTF,
+ PINGRP_UDA,
+ PINGRP_CRTP,
+ PINGRP_SDB,
+
+ /* these pin groups only have pullup and pull down control */
+ PINGRP_FIRST_NO_MUX,
+ PINGRP_CK32 = PINGRP_FIRST_NO_MUX,
+ PINGRP_DDRC,
+ PINGRP_PMCA,
+ PINGRP_PMCB,
+ PINGRP_PMCC,
+ PINGRP_PMCD,
+ PINGRP_PMCE,
+ PINGRP_XM2C,
+ PINGRP_XM2D,
+
+ PINGRP_COUNT,
+};
+
+/*
+ * Functions which can be assigned to each of the pin groups. The values here
+ * bear no relation to the values programmed into pinmux registers and are
+ * purely a convenience. The translation is done through a table search.
+ */
+enum pmux_func {
+ PMUX_FUNC_AHB_CLK,
+ PMUX_FUNC_APB_CLK,
+ PMUX_FUNC_AUDIO_SYNC,
+ PMUX_FUNC_CRT,
+ PMUX_FUNC_DAP1,
+ PMUX_FUNC_DAP2,
+ PMUX_FUNC_DAP3,
+ PMUX_FUNC_DAP4,
+ PMUX_FUNC_DAP5,
+ PMUX_FUNC_DISPA,
+ PMUX_FUNC_DISPB,
+ PMUX_FUNC_EMC_TEST0_DLL,
+ PMUX_FUNC_EMC_TEST1_DLL,
+ PMUX_FUNC_GMI,
+ PMUX_FUNC_GMI_INT,
+ PMUX_FUNC_HDMI,
+ PMUX_FUNC_I2C,
+ PMUX_FUNC_I2C2,
+ PMUX_FUNC_I2C3,
+ PMUX_FUNC_IDE,
+ PMUX_FUNC_IRDA,
+ PMUX_FUNC_KBC,
+ PMUX_FUNC_MIO,
+ PMUX_FUNC_MIPI_HS,
+ PMUX_FUNC_NAND,
+ PMUX_FUNC_OSC,
+ PMUX_FUNC_OWR,
+ PMUX_FUNC_PCIE,
+ PMUX_FUNC_PLLA_OUT,
+ PMUX_FUNC_PLLC_OUT1,
+ PMUX_FUNC_PLLM_OUT1,
+ PMUX_FUNC_PLLP_OUT2,
+ PMUX_FUNC_PLLP_OUT3,
+ PMUX_FUNC_PLLP_OUT4,
+ PMUX_FUNC_PWM,
+ PMUX_FUNC_PWR_INTR,
+ PMUX_FUNC_PWR_ON,
+ PMUX_FUNC_RTCK,
+ PMUX_FUNC_SDIO1,
+ PMUX_FUNC_SDIO2,
+ PMUX_FUNC_SDIO3,
+ PMUX_FUNC_SDIO4,
+ PMUX_FUNC_SFLASH,
+ PMUX_FUNC_SPDIF,
+ PMUX_FUNC_SPI1,
+ PMUX_FUNC_SPI2,
+ PMUX_FUNC_SPI2_ALT,
+ PMUX_FUNC_SPI3,
+ PMUX_FUNC_SPI4,
+ PMUX_FUNC_TRACE,
+ PMUX_FUNC_TWC,
+ PMUX_FUNC_UARTA,
+ PMUX_FUNC_UARTB,
+ PMUX_FUNC_UARTC,
+ PMUX_FUNC_UARTD,
+ PMUX_FUNC_UARTE,
+ PMUX_FUNC_ULPI,
+ PMUX_FUNC_VI,
+ PMUX_FUNC_VI_SENSOR_CLK,
+ PMUX_FUNC_XIO,
+ PMUX_FUNC_SAFE,
+
+ /* These don't have a name, but can be used in the table */
+ PMUX_FUNC_RSVD1,
+ PMUX_FUNC_RSVD2,
+ PMUX_FUNC_RSVD3,
+ PMUX_FUNC_RSVD4,
+ PMUX_FUNC_RSVD, /* Not valid and should not be used */
+
+ PMUX_FUNC_COUNT,
+
+ PMUX_FUNC_NONE = -1,
+};
+
+/* return 1 if a pmux_func is in range */
+#define pmux_func_isvalid(func) ((func) >= 0 && (func) < PMUX_FUNC_COUNT && \
+ (func) != PMUX_FUNC_RSVD)
+
+/* The pullup/pulldown state of a pin group */
+enum pmux_pull {
+ PMUX_PULL_NORMAL = 0,
+ PMUX_PULL_DOWN,
+ PMUX_PULL_UP,
+};
+
+/* Defines whether a pin group is tristated or in normal operation */
+enum pmux_tristate {
+ PMUX_TRI_NORMAL = 0,
+ PMUX_TRI_TRISTATE = 1,
+};
+
+/* Available power domains used by pin groups */
+enum pmux_vddio {
+ PMUX_VDDIO_BB = 0,
+ PMUX_VDDIO_LCD,
+ PMUX_VDDIO_VI,
+ PMUX_VDDIO_UART,
+ PMUX_VDDIO_DDR,
+ PMUX_VDDIO_NAND,
+ PMUX_VDDIO_SYS,
+ PMUX_VDDIO_AUDIO,
+ PMUX_VDDIO_SD,
+
+ PMUX_VDDIO_NONE
+};
+
+enum {
+ PMUX_TRISTATE_REGS = 4,
+ PMUX_MUX_REGS = 7,
+ PMUX_PULL_REGS = 5,
+};
+
+/* APB MISC Pin Mux and Tristate (APB_MISC_PP_) registers */
+struct pmux_tri_ctlr {
+ uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */
+ uint pmt_reserved1; /* ABP_MISC_PP_ reserved offset 04 */
+ uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */
+ uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */
+ uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */
+ uint pmt_tri[PMUX_TRISTATE_REGS];/* _TRI_STATE_REG_A/B/C/D_0 14-20 */
+ uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */
+
+ uint pmt_reserved[22]; /* ABP_MISC_PP_ reserved offs 28-7C */
+
+ uint pmt_ctl[PMUX_MUX_REGS]; /* _PIN_MUX_CTL_A-G_0, offset 80 */
+ uint pmt_reserved4; /* ABP_MISC_PP_ reserved offset 9c */
+ uint pmt_pull[PMUX_PULL_REGS]; /* APB_MISC_PP_PULLUPDOWN_REG_A-E */
+};
+
+/*
+ * This defines the configuration for a pin, including the function assigned,
+ * pull up/down settings and tristate settings. Having set up one of these
+ * you can call pinmux_config_pingroup() to configure a pin in one step. Also
+ * available is pinmux_config_table() to configure a list of pins.
+ */
+struct pingroup_config {
+ enum pmux_pingrp pingroup; /* pin group PINGRP_... */
+ enum pmux_func func; /* function to assign FUNC_... */
+ enum pmux_pull pull; /* pull up/down/normal PMUX_PULL_...*/
+ enum pmux_tristate tristate; /* tristate or normal PMUX_TRI_... */
+};
+
+/* Set a pin group to tristate */
+void pinmux_tristate_enable(enum pmux_pingrp pin);
+
+/* Set a pin group to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pingrp pin);
+
+/* Set the pull up/down feature for a pin group */
+void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd);
+
+/* Set the mux function for a pin group */
+void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func);
+
+/* Set the complete configuration for a pin group */
+void pinmux_config_pingroup(struct pingroup_config *config);
+
+void pinmux_set_tristate(enum pmux_pingrp pin, int enable);
+
+/**
+ * Configuure a list of pin groups
+ *
+ * @param config List of config items
+ * @param len Number of config items in list
+ */
+void pinmux_config_table(struct pingroup_config *config, int len);
+
+#endif /* PINMUX_H */
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _PMC_H_
+#define _PMC_H_
+
+/* Power Management Controller (APBDEV_PMC_) registers */
+struct pmc_ctlr {
+ uint pmc_cntrl; /* _CNTRL_0, offset 00 */
+ uint pmc_sec_disable; /* _SEC_DISABLE_0, offset 04 */
+ uint pmc_pmc_swrst; /* _PMC_SWRST_0, offset 08 */
+ uint pmc_wake_mask; /* _WAKE_MASK_0, offset 0C */
+ uint pmc_wake_lvl; /* _WAKE_LVL_0, offset 10 */
+ uint pmc_wake_status; /* _WAKE_STATUS_0, offset 14 */
+ uint pmc_sw_wake_status; /* _SW_WAKE_STATUS_0, offset 18 */
+ uint pmc_dpd_pads_oride; /* _DPD_PADS_ORIDE_0, offset 1C */
+ uint pmc_dpd_sample; /* _DPD_PADS_SAMPLE_0, offset 20 */
+ uint pmc_dpd_enable; /* _DPD_PADS_ENABLE_0, offset 24 */
+ uint pmc_pwrgate_timer_off; /* _PWRGATE_TIMER_OFF_0, offset 28 */
+ uint pmc_pwrgate_timer_on; /* _PWRGATE_TIMER_ON_0, offset 2C */
+ uint pmc_pwrgate_toggle; /* _PWRGATE_TOGGLE_0, offset 30 */
+ uint pmc_remove_clamping; /* _REMOVE_CLAMPING_CMD_0, offset 34 */
+ uint pmc_pwrgate_status; /* _PWRGATE_STATUS_0, offset 38 */
+ uint pmc_pwrgood_timer; /* _PWRGOOD_TIMER_0, offset 3C */
+ uint pmc_blink_timer; /* _BLINK_TIMER_0, offset 40 */
+ uint pmc_no_iopower; /* _NO_IOPOWER_0, offset 44 */
+ uint pmc_pwr_det; /* _PWR_DET_0, offset 48 */
+ uint pmc_pwr_det_latch; /* _PWR_DET_LATCH_0, offset 4C */
+
+ uint pmc_scratch0; /* _SCRATCH0_0, offset 50 */
+ uint pmc_scratch1; /* _SCRATCH1_0, offset 54 */
+ uint pmc_scratch2; /* _SCRATCH2_0, offset 58 */
+ uint pmc_scratch3; /* _SCRATCH3_0, offset 5C */
+ uint pmc_scratch4; /* _SCRATCH4_0, offset 60 */
+ uint pmc_scratch5; /* _SCRATCH5_0, offset 64 */
+ uint pmc_scratch6; /* _SCRATCH6_0, offset 68 */
+ uint pmc_scratch7; /* _SCRATCH7_0, offset 6C */
+ uint pmc_scratch8; /* _SCRATCH8_0, offset 70 */
+ uint pmc_scratch9; /* _SCRATCH9_0, offset 74 */
+ uint pmc_scratch10; /* _SCRATCH10_0, offset 78 */
+ uint pmc_scratch11; /* _SCRATCH11_0, offset 7C */
+ uint pmc_scratch12; /* _SCRATCH12_0, offset 80 */
+ uint pmc_scratch13; /* _SCRATCH13_0, offset 84 */
+ uint pmc_scratch14; /* _SCRATCH14_0, offset 88 */
+ uint pmc_scratch15; /* _SCRATCH15_0, offset 8C */
+ uint pmc_scratch16; /* _SCRATCH16_0, offset 90 */
+ uint pmc_scratch17; /* _SCRATCH17_0, offset 94 */
+ uint pmc_scratch18; /* _SCRATCH18_0, offset 98 */
+ uint pmc_scratch19; /* _SCRATCH19_0, offset 9C */
+ uint pmc_scratch20; /* _SCRATCH20_0, offset A0 */
+ uint pmc_scratch21; /* _SCRATCH21_0, offset A4 */
+ uint pmc_scratch22; /* _SCRATCH22_0, offset A8 */
+ uint pmc_scratch23; /* _SCRATCH23_0, offset AC */
+
+ uint pmc_secure_scratch0; /* _SECURE_SCRATCH0_0, offset B0 */
+ uint pmc_secure_scratch1; /* _SECURE_SCRATCH1_0, offset B4 */
+ uint pmc_secure_scratch2; /* _SECURE_SCRATCH2_0, offset B8 */
+ uint pmc_secure_scratch3; /* _SECURE_SCRATCH3_0, offset BC */
+ uint pmc_secure_scratch4; /* _SECURE_SCRATCH4_0, offset C0 */
+ uint pmc_secure_scratch5; /* _SECURE_SCRATCH5_0, offset C4 */
+
+ uint pmc_cpupwrgood_timer; /* _CPUPWRGOOD_TIMER_0, offset C8 */
+ uint pmc_cpupwroff_timer; /* _CPUPWROFF_TIMER_0, offset CC */
+ uint pmc_pg_mask; /* _PG_MASK_0, offset D0 */
+ uint pmc_pg_mask_1; /* _PG_MASK_1_0, offset D4 */
+ uint pmc_auto_wake_lvl; /* _AUTO_WAKE_LVL_0, offset D8 */
+ uint pmc_auto_wake_lvl_mask; /* _AUTO_WAKE_LVL_MASK_0, offset DC */
+ uint pmc_wake_delay; /* _WAKE_DELAY_0, offset E0 */
+ uint pmc_pwr_det_val; /* _PWR_DET_VAL_0, offset E4 */
+ uint pmc_ddr_pwr; /* _DDR_PWR_0, offset E8 */
+ uint pmc_usb_debounce_del; /* _USB_DEBOUNCE_DEL_0, offset EC */
+ uint pmc_usb_ao; /* _USB_AO_0, offset F0 */
+ uint pmc_crypto_op; /* _CRYPTO_OP__0, offset F4 */
+ uint pmc_pllp_wb0_override; /* _PLLP_WB0_OVERRIDE_0, offset F8 */
+
+ uint pmc_scratch24; /* _SCRATCH24_0, offset FC */
+ uint pmc_scratch25; /* _SCRATCH24_0, offset 100 */
+ uint pmc_scratch26; /* _SCRATCH24_0, offset 104 */
+ uint pmc_scratch27; /* _SCRATCH24_0, offset 108 */
+ uint pmc_scratch28; /* _SCRATCH24_0, offset 10C */
+ uint pmc_scratch29; /* _SCRATCH24_0, offset 110 */
+ uint pmc_scratch30; /* _SCRATCH24_0, offset 114 */
+ uint pmc_scratch31; /* _SCRATCH24_0, offset 118 */
+ uint pmc_scratch32; /* _SCRATCH24_0, offset 11C */
+ uint pmc_scratch33; /* _SCRATCH24_0, offset 120 */
+ uint pmc_scratch34; /* _SCRATCH24_0, offset 124 */
+ uint pmc_scratch35; /* _SCRATCH24_0, offset 128 */
+ uint pmc_scratch36; /* _SCRATCH24_0, offset 12C */
+ uint pmc_scratch37; /* _SCRATCH24_0, offset 130 */
+ uint pmc_scratch38; /* _SCRATCH24_0, offset 134 */
+ uint pmc_scratch39; /* _SCRATCH24_0, offset 138 */
+ uint pmc_scratch40; /* _SCRATCH24_0, offset 13C */
+ uint pmc_scratch41; /* _SCRATCH24_0, offset 140 */
+ uint pmc_scratch42; /* _SCRATCH24_0, offset 144 */
+
+ uint pmc_bo_mirror0; /* _BOUNDOUT_MIRROR0_0, offset 148 */
+ uint pmc_bo_mirror1; /* _BOUNDOUT_MIRROR1_0, offset 14C */
+ uint pmc_bo_mirror2; /* _BOUNDOUT_MIRROR2_0, offset 150 */
+ uint pmc_sys_33v_en; /* _SYS_33V_EN_0, offset 154 */
+ uint pmc_bo_mirror_access; /* _BOUNDOUT_MIRROR_ACCESS_0, off158 */
+ uint pmc_gate; /* _GATE_0, offset 15C */
+};
+
+#define CPU_PWRED 1
+#define CPU_CLMP 1
+
+#define PARTID_CP 0xFFFFFFF8
+#define START_CP (1 << 8)
+
+#define CPUPWRREQ_OE (1 << 16)
+
+#endif /* PMC_H */
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ARCH_PMU_H_
+#define _ARCH_PMU_H_
+
+/* Set core and CPU voltages to nominal levels */
+int pmu_set_nominal(void);
+
+#endif /* _ARCH_PMU_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SCU_H_
+#define _SCU_H_
+
+/* ARM Snoop Control Unit (SCU) registers */
+struct scu_ctlr {
+ uint scu_ctrl; /* SCU Control Register, offset 00 */
+ uint scu_cfg; /* SCU Config Register, offset 04 */
+ uint scu_cpu_pwr_stat; /* SCU CPU Power Status Register, offset 08 */
+ uint scu_inv_all; /* SCU Invalidate All Register, offset 0C */
+ uint scu_reserved0[12]; /* reserved, offset 10-3C */
+ uint scu_filt_start; /* SCU Filtering Start Address Reg, offset 40 */
+ uint scu_filt_end; /* SCU Filtering End Address Reg, offset 44 */
+ uint scu_reserved1[2]; /* reserved, offset 48-4C */
+ uint scu_acc_ctl; /* SCU Access Control Register, offset 50 */
+ uint scu_ns_acc_ctl; /* SCU Non-secure Access Cntrl Reg, offset 54 */
+};
+
+#define SCU_CTRL_ENABLE (1 << 0)
+
+#endif /* SCU_H */
--- /dev/null
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SDRAM_PARAM_H_
+#define _SDRAM_PARAM_H_
+
+/*
+ * Defines the number of 32-bit words provided in each set of SDRAM parameters
+ * for arbitration configuration data.
+ */
+#define BCT_SDRAM_ARB_CONFIG_WORDS 27
+
+enum memory_type {
+ MEMORY_TYPE_NONE = 0,
+ MEMORY_TYPE_DDR,
+ MEMORY_TYPE_LPDDR,
+ MEMORY_TYPE_DDR2,
+ MEMORY_TYPE_LPDDR2,
+ MEMORY_TYPE_NUM,
+ MEMORY_TYPE_FORCE32 = 0x7FFFFFFF
+};
+
+/* Defines the SDRAM parameter structure */
+struct sdram_params {
+ enum memory_type memory_type;
+ u32 pllm_charge_pump_setup_control;
+ u32 pllm_loop_filter_setup_control;
+ u32 pllm_input_divider;
+ u32 pllm_feedback_divider;
+ u32 pllm_post_divider;
+ u32 pllm_stable_time;
+ u32 emc_clock_divider;
+ u32 emc_auto_cal_interval;
+ u32 emc_auto_cal_config;
+ u32 emc_auto_cal_wait;
+ u32 emc_pin_program_wait;
+ u32 emc_rc;
+ u32 emc_rfc;
+ u32 emc_ras;
+ u32 emc_rp;
+ u32 emc_r2w;
+ u32 emc_w2r;
+ u32 emc_r2p;
+ u32 emc_w2p;
+ u32 emc_rd_rcd;
+ u32 emc_wr_rcd;
+ u32 emc_rrd;
+ u32 emc_rext;
+ u32 emc_wdv;
+ u32 emc_quse;
+ u32 emc_qrst;
+ u32 emc_qsafe;
+ u32 emc_rdv;
+ u32 emc_refresh;
+ u32 emc_burst_refresh_num;
+ u32 emc_pdex2wr;
+ u32 emc_pdex2rd;
+ u32 emc_pchg2pden;
+ u32 emc_act2pden;
+ u32 emc_ar2pden;
+ u32 emc_rw2pden;
+ u32 emc_txsr;
+ u32 emc_tcke;
+ u32 emc_tfaw;
+ u32 emc_trpab;
+ u32 emc_tclkstable;
+ u32 emc_tclkstop;
+ u32 emc_trefbw;
+ u32 emc_quseextra;
+ u32 emc_fbioc_fg1;
+ u32 emc_fbio_dqsib_dly;
+ u32 emc_fbio_dqsib_dly_msb;
+ u32 emc_fbio_quse_dly;
+ u32 emc_fbio_quse_dly_msb;
+ u32 emc_fbio_cfg5;
+ u32 emc_fbio_cfg6;
+ u32 emc_fbio_spare;
+ u32 emc_mrs;
+ u32 emc_emrs;
+ u32 emc_mrw1;
+ u32 emc_mrw2;
+ u32 emc_mrw3;
+ u32 emc_mrw_reset_command;
+ u32 emc_mrw_reset_init_wait;
+ u32 emc_adr_cfg;
+ u32 emc_adr_cfg1;
+ u32 emc_emem_cfg;
+ u32 emc_low_latency_config;
+ u32 emc_cfg;
+ u32 emc_cfg2;
+ u32 emc_dbg;
+ u32 ahb_arbitration_xbar_ctrl;
+ u32 emc_cfg_dig_dll;
+ u32 emc_dll_xform_dqs;
+ u32 emc_dll_xform_quse;
+ u32 warm_boot_wait;
+ u32 emc_ctt_term_ctrl;
+ u32 emc_odt_write;
+ u32 emc_odt_read;
+ u32 emc_zcal_ref_cnt;
+ u32 emc_zcal_wait_cnt;
+ u32 emc_zcal_mrw_cmd;
+ u32 emc_mrs_reset_dll;
+ u32 emc_mrw_zq_init_dev0;
+ u32 emc_mrw_zq_init_dev1;
+ u32 emc_mrw_zq_init_wait;
+ u32 emc_mrs_reset_dll_wait;
+ u32 emc_emrs_emr2;
+ u32 emc_emrs_emr3;
+ u32 emc_emrs_ddr2_dll_enable;
+ u32 emc_mrs_ddr2_dll_reset;
+ u32 emc_emrs_ddr2_ocd_calib;
+ u32 emc_edr2_wait;
+ u32 emc_cfg_clktrim0;
+ u32 emc_cfg_clktrim1;
+ u32 emc_cfg_clktrim2;
+ u32 pmc_ddr_pwr;
+ u32 apb_misc_gp_xm2cfga_padctrl;
+ u32 apb_misc_gp_xm2cfgc_padctrl;
+ u32 apb_misc_gp_xm2cfgc_padctrl2;
+ u32 apb_misc_gp_xm2cfgd_padctrl;
+ u32 apb_misc_gp_xm2cfgd_padctrl2;
+ u32 apb_misc_gp_xm2clkcfg_padctrl;
+ u32 apb_misc_gp_xm2comp_padctrl;
+ u32 apb_misc_gp_xm2vttgen_padctrl;
+ u32 arbitration_config[BCT_SDRAM_ARB_CONFIG_WORDS];
+};
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+struct tegra20_sysinfo {
+ char *board_string;
+};
+
+void invalidate_dcache(void);
+
+extern const struct tegra20_sysinfo sysinfo;
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA20_H_
+#define _TEGRA20_H_
+
+#define NV_PA_SDRAM_BASE 0x00000000
+#define NV_PA_ARM_PERIPHBASE 0x50040000
+#define NV_PA_PG_UP_BASE 0x60000000
+#define NV_PA_TMRUS_BASE 0x60005010
+#define NV_PA_CLK_RST_BASE 0x60006000
+#define NV_PA_FLOW_BASE 0x60007000
+#define NV_PA_GPIO_BASE 0x6000D000
+#define NV_PA_EVP_BASE 0x6000F000
+#define NV_PA_APB_MISC_BASE 0x70000000
+#define TEGRA20_APB_MISC_GP_BASE (NV_PA_APB_MISC_BASE + 0x0800)
+#define NV_PA_APB_UARTA_BASE (NV_PA_APB_MISC_BASE + 0x6000)
+#define NV_PA_APB_UARTB_BASE (NV_PA_APB_MISC_BASE + 0x6040)
+#define NV_PA_APB_UARTC_BASE (NV_PA_APB_MISC_BASE + 0x6200)
+#define NV_PA_APB_UARTD_BASE (NV_PA_APB_MISC_BASE + 0x6300)
+#define NV_PA_APB_UARTE_BASE (NV_PA_APB_MISC_BASE + 0x6400)
+#define TEGRA20_SPI_BASE (NV_PA_APB_MISC_BASE + 0xC380)
+#define TEGRA20_PMC_BASE (NV_PA_APB_MISC_BASE + 0xE400)
+#define TEGRA20_FUSE_BASE (NV_PA_APB_MISC_BASE + 0xF800)
+#define NV_PA_CSITE_BASE 0x70040000
+#define TEGRA_USB1_BASE 0xC5000000
+#define TEGRA_USB3_BASE 0xC5008000
+#define TEGRA_USB_ADDR_MASK 0xFFFFC000
+
+#define TEGRA20_SDRC_CS0 NV_PA_SDRAM_BASE
+#define LOW_LEVEL_SRAM_STACK 0x4000FFFC
+#define EARLY_AVP_STACK (NV_PA_SDRAM_BASE + 0x20000)
+#define EARLY_CPU_STACK (EARLY_AVP_STACK - 4096)
+#define PG_UP_TAG_AVP 0xAAAAAAAA
+
+#ifndef __ASSEMBLY__
+struct timerus {
+ unsigned int cntr_1us;
+};
+
+/* Address at which WB code runs, it must not overlap Bootrom's IRAM usage */
+#define AP20_WB_RUN_ADDRESS 0x40020000
+
+#define NVBOOTINFOTABLE_BCTSIZE 0x38 /* BCT size in BIT in IRAM */
+#define NVBOOTINFOTABLE_BCTPTR 0x3C /* BCT pointer in BIT in IRAM */
+#define BCT_ODMDATA_OFFSET 4068 /* 12 bytes from end of BCT */
+
+/* These are the available SKUs (product types) for Tegra */
+enum {
+ SKU_ID_T20 = 0x8,
+ SKU_ID_T25SE = 0x14,
+ SKU_ID_AP25 = 0x17,
+ SKU_ID_T25 = 0x18,
+ SKU_ID_AP25E = 0x1b,
+ SKU_ID_T25E = 0x1c,
+};
+
+/* These are the SOC categories that affect clocking */
+enum {
+ TEGRA_SOC_T20,
+ TEGRA_SOC_T25,
+
+ TEGRA_SOC_COUNT,
+ TEGRA_SOC_UNKNOWN = -1,
+};
+
+#else /* __ASSEMBLY__ */
+#define PRM_RSTCTRL TEGRA20_PMC_BASE
+#endif
+
+#endif /* TEGRA20_H */
--- /dev/null
+/*
+ * NVIDIA Tegra20 I2C controller
+ *
+ * Copyright 2010-2011 NVIDIA Corporation
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_I2C_H_
+#define _TEGRA_I2C_H_
+
+#include <asm/types.h>
+
+enum {
+ I2C_TIMEOUT_USEC = 10000, /* Wait time for completion */
+ I2C_FIFO_DEPTH = 8, /* I2C fifo depth */
+};
+
+enum i2c_transaction_flags {
+ I2C_IS_WRITE = 0x1, /* for I2C write operation */
+ I2C_IS_10_BIT_ADDRESS = 0x2, /* for 10-bit I2C slave address */
+ I2C_USE_REPEATED_START = 0x4, /* for repeat start */
+ I2C_NO_ACK = 0x8, /* for slave that won't generate ACK */
+ I2C_SOFTWARE_CONTROLLER = 0x10, /* for I2C transfer using GPIO */
+ I2C_NO_STOP = 0x20,
+};
+
+/* Contians the I2C transaction details */
+struct i2c_trans_info {
+ /* flags to indicate the transaction details */
+ enum i2c_transaction_flags flags;
+ u32 address; /* I2C slave device address */
+ u32 num_bytes; /* number of bytes to be transferred */
+ /*
+ * Send/receive buffer. For the I2C send operation this buffer should
+ * be filled with the data to be sent to the slave device. For the I2C
+ * receive operation this buffer is filled with the data received from
+ * the slave device.
+ */
+ u8 *buf;
+ int is_10bit_address;
+};
+
+struct i2c_control {
+ u32 tx_fifo;
+ u32 rx_fifo;
+ u32 packet_status;
+ u32 fifo_control;
+ u32 fifo_status;
+ u32 int_mask;
+ u32 int_status;
+};
+
+struct dvc_ctlr {
+ u32 ctrl1; /* 00: DVC_CTRL_REG1 */
+ u32 ctrl2; /* 04: DVC_CTRL_REG2 */
+ u32 ctrl3; /* 08: DVC_CTRL_REG3 */
+ u32 status; /* 0C: DVC_STATUS_REG */
+ u32 ctrl; /* 10: DVC_I2C_CTRL_REG */
+ u32 addr_data; /* 14: DVC_I2C_ADDR_DATA_REG */
+ u32 reserved_0[2]; /* 18: */
+ u32 req; /* 20: DVC_REQ_REGISTER */
+ u32 addr_data3; /* 24: DVC_I2C_ADDR_DATA_REG_3 */
+ u32 reserved_1[6]; /* 28: */
+ u32 cnfg; /* 40: DVC_I2C_CNFG */
+ u32 cmd_addr0; /* 44: DVC_I2C_CMD_ADDR0 */
+ u32 cmd_addr1; /* 48: DVC_I2C_CMD_ADDR1 */
+ u32 cmd_data1; /* 4C: DVC_I2C_CMD_DATA1 */
+ u32 cmd_data2; /* 50: DVC_I2C_CMD_DATA2 */
+ u32 reserved_2[2]; /* 54: */
+ u32 i2c_status; /* 5C: DVC_I2C_STATUS */
+ struct i2c_control control; /* 60 ~ 78 */
+};
+
+struct i2c_ctlr {
+ u32 cnfg; /* 00: I2C_I2C_CNFG */
+ u32 cmd_addr0; /* 04: I2C_I2C_CMD_ADDR0 */
+ u32 cmd_addr1; /* 08: I2C_I2C_CMD_DATA1 */
+ u32 cmd_data1; /* 0C: I2C_I2C_CMD_DATA2 */
+ u32 cmd_data2; /* 10: DVC_I2C_CMD_DATA2 */
+ u32 reserved_0[2]; /* 14: */
+ u32 status; /* 1C: I2C_I2C_STATUS */
+ u32 sl_cnfg; /* 20: I2C_I2C_SL_CNFG */
+ u32 sl_rcvd; /* 24: I2C_I2C_SL_RCVD */
+ u32 sl_status; /* 28: I2C_I2C_SL_STATUS */
+ u32 sl_addr1; /* 2C: I2C_I2C_SL_ADDR1 */
+ u32 sl_addr2; /* 30: I2C_I2C_SL_ADDR2 */
+ u32 reserved_1[2]; /* 34: */
+ u32 sl_delay_count; /* 3C: I2C_I2C_SL_DELAY_COUNT */
+ u32 reserved_2[4]; /* 40: */
+ struct i2c_control control; /* 50 ~ 68 */
+};
+
+/* bit fields definitions for IO Packet Header 1 format */
+#define PKT_HDR1_PROTOCOL_SHIFT 4
+#define PKT_HDR1_PROTOCOL_MASK (0xf << PKT_HDR1_PROTOCOL_SHIFT)
+#define PKT_HDR1_CTLR_ID_SHIFT 12
+#define PKT_HDR1_CTLR_ID_MASK (0xf << PKT_HDR1_CTLR_ID_SHIFT)
+#define PKT_HDR1_PKT_ID_SHIFT 16
+#define PKT_HDR1_PKT_ID_MASK (0xff << PKT_HDR1_PKT_ID_SHIFT)
+#define PROTOCOL_TYPE_I2C 1
+
+/* bit fields definitions for IO Packet Header 2 format */
+#define PKT_HDR2_PAYLOAD_SIZE_SHIFT 0
+#define PKT_HDR2_PAYLOAD_SIZE_MASK (0xfff << PKT_HDR2_PAYLOAD_SIZE_SHIFT)
+
+/* bit fields definitions for IO Packet Header 3 format */
+#define PKT_HDR3_READ_MODE_SHIFT 19
+#define PKT_HDR3_READ_MODE_MASK (1 << PKT_HDR3_READ_MODE_SHIFT)
+#define PKT_HDR3_SLAVE_ADDR_SHIFT 0
+#define PKT_HDR3_SLAVE_ADDR_MASK (0x3ff << PKT_HDR3_SLAVE_ADDR_SHIFT)
+
+#define DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT 26
+#define DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK \
+ (1 << DVC_CTRL_REG3_I2C_HW_SW_PROG_SHIFT)
+
+/* I2C_CNFG */
+#define I2C_CNFG_NEW_MASTER_FSM_SHIFT 11
+#define I2C_CNFG_NEW_MASTER_FSM_MASK (1 << I2C_CNFG_NEW_MASTER_FSM_SHIFT)
+#define I2C_CNFG_PACKET_MODE_SHIFT 10
+#define I2C_CNFG_PACKET_MODE_MASK (1 << I2C_CNFG_PACKET_MODE_SHIFT)
+
+/* I2C_SL_CNFG */
+#define I2C_SL_CNFG_NEWSL_SHIFT 2
+#define I2C_SL_CNFG_NEWSL_MASK (1 << I2C_SL_CNFG_NEWSL_SHIFT)
+
+/* I2C_FIFO_STATUS */
+#define TX_FIFO_FULL_CNT_SHIFT 0
+#define TX_FIFO_FULL_CNT_MASK (0xf << TX_FIFO_FULL_CNT_SHIFT)
+#define TX_FIFO_EMPTY_CNT_SHIFT 4
+#define TX_FIFO_EMPTY_CNT_MASK (0xf << TX_FIFO_EMPTY_CNT_SHIFT)
+
+/* I2C_INTERRUPT_STATUS */
+#define I2C_INT_XFER_COMPLETE_SHIFT 7
+#define I2C_INT_XFER_COMPLETE_MASK (1 << I2C_INT_XFER_COMPLETE_SHIFT)
+#define I2C_INT_NO_ACK_SHIFT 3
+#define I2C_INT_NO_ACK_MASK (1 << I2C_INT_NO_ACK_SHIFT)
+#define I2C_INT_ARBITRATION_LOST_SHIFT 2
+#define I2C_INT_ARBITRATION_LOST_MASK (1 << I2C_INT_ARBITRATION_LOST_SHIFT)
+
+/**
+ * Returns the bus number of the DVC controller
+ *
+ * @return number of bus, or -1 if there is no DVC active
+ */
+int tegra_i2c_get_dvc_bus_num(void);
+
+#endif
--- /dev/null
+/*
+ * NVIDIA Tegra20 SPI-FLASH controller
+ *
+ * Copyright 2010-2012 NVIDIA Corporation
+ *
+ * This software may be used and distributed according to the
+ * terms of the GNU Public License, Version 2, incorporated
+ * herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_SPI_H_
+#define _TEGRA_SPI_H_
+
+#include <asm/types.h>
+
+struct spi_tegra {
+ u32 command; /* SPI_COMMAND_0 register */
+ u32 status; /* SPI_STATUS_0 register */
+ u32 rx_cmp; /* SPI_RX_CMP_0 register */
+ u32 dma_ctl; /* SPI_DMA_CTL_0 register */
+ u32 tx_fifo; /* SPI_TX_FIFO_0 register */
+ u32 rsvd[3]; /* offsets 0x14 to 0x1F reserved */
+ u32 rx_fifo; /* SPI_RX_FIFO_0 register */
+};
+
+#define SPI_CMD_GO (1 << 30)
+#define SPI_CMD_ACTIVE_SCLK_SHIFT 26
+#define SPI_CMD_ACTIVE_SCLK_MASK (3 << SPI_CMD_ACTIVE_SCLK_SHIFT)
+#define SPI_CMD_CK_SDA (1 << 21)
+#define SPI_CMD_ACTIVE_SDA_SHIFT 18
+#define SPI_CMD_ACTIVE_SDA_MASK (3 << SPI_CMD_ACTIVE_SDA_SHIFT)
+#define SPI_CMD_CS_POL (1 << 16)
+#define SPI_CMD_TXEN (1 << 15)
+#define SPI_CMD_RXEN (1 << 14)
+#define SPI_CMD_CS_VAL (1 << 13)
+#define SPI_CMD_CS_SOFT (1 << 12)
+#define SPI_CMD_CS_DELAY (1 << 9)
+#define SPI_CMD_CS3_EN (1 << 8)
+#define SPI_CMD_CS2_EN (1 << 7)
+#define SPI_CMD_CS1_EN (1 << 6)
+#define SPI_CMD_CS0_EN (1 << 5)
+#define SPI_CMD_BIT_LENGTH (1 << 4)
+#define SPI_CMD_BIT_LENGTH_MASK 0x0000001F
+
+#define SPI_STAT_BSY (1 << 31)
+#define SPI_STAT_RDY (1 << 30)
+#define SPI_STAT_RXF_FLUSH (1 << 29)
+#define SPI_STAT_TXF_FLUSH (1 << 28)
+#define SPI_STAT_RXF_UNR (1 << 27)
+#define SPI_STAT_TXF_OVF (1 << 26)
+#define SPI_STAT_RXF_EMPTY (1 << 25)
+#define SPI_STAT_RXF_FULL (1 << 24)
+#define SPI_STAT_TXF_EMPTY (1 << 23)
+#define SPI_STAT_TXF_FULL (1 << 22)
+#define SPI_STAT_SEL_TXRX_N (1 << 16)
+#define SPI_STAT_CUR_BLKCNT (1 << 15)
+
+#define SPI_TIMEOUT 1000
+#define TEGRA20_SPI_MAX_FREQ 52000000
+
+#endif /* _TEGRA_SPI_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra20 timer functions */
+
+#ifndef _TEGRA20_TIMER_H
+#define _TEGRA20_TIMER_H
+
+/* returns the current monotonic timer value in microseconds */
+unsigned long timer_get_us(void);
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UART_SPI_SWITCH_H
+#define _UART_SPI_SWITCH_H
+
+#if defined(CONFIG_SPI_UART_SWITCH)
+/*
+ * Signal that we are about to use the UART. This unfortunate hack is
+ * required by Seaboard, which cannot use its console and SPI at the same
+ * time! If the board file provides this, the board config will declare it.
+ * Let this be a lesson for others.
+ */
+void pinmux_select_uart(void);
+
+/*
+ * Signal that we are about the use the SPI bus.
+ */
+void pinmux_select_spi(void);
+
+#else /* not CONFIG_SPI_UART_SWITCH */
+
+static inline void pinmux_select_uart(void) {}
+static inline void pinmux_select_spi(void) {}
+
+#endif
+
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _UART_H_
+#define _UART_H_
+
+/* UART registers */
+struct uart_ctlr {
+ uint uart_thr_dlab_0; /* UART_THR_DLAB_0_0, offset 00 */
+ uint uart_ier_dlab_0; /* UART_IER_DLAB_0_0, offset 04 */
+ uint uart_iir_fcr; /* UART_IIR_FCR_0, offset 08 */
+ uint uart_lcr; /* UART_LCR_0, offset 0C */
+ uint uart_mcr; /* UART_MCR_0, offset 10 */
+ uint uart_lsr; /* UART_LSR_0, offset 14 */
+ uint uart_msr; /* UART_MSR_0, offset 18 */
+ uint uart_spr; /* UART_SPR_0, offset 1C */
+ uint uart_irda_csr; /* UART_IRDA_CSR_0, offset 20 */
+ uint uart_reserved[6]; /* Reserved, unused, offset 24-38*/
+ uint uart_asr; /* UART_ASR_0, offset 3C */
+};
+
+#define NVRM_PLLP_FIXED_FREQ_KHZ 216000
+#define NV_DEFAULT_DEBUG_BAUD 115200
+
+#define UART_FCR_TRIGGER_3 0x30 /* Mask for trigger set at 3 */
+
+#endif /* UART_H */
--- /dev/null
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _TEGRA_USB_H_
+#define _TEGRA_USB_H_
+
+
+/* USB Controller (USBx_CONTROLLER_) regs */
+struct usb_ctlr {
+ /* 0x000 */
+ uint id;
+ uint reserved0;
+ uint host;
+ uint device;
+
+ /* 0x010 */
+ uint txbuf;
+ uint rxbuf;
+ uint reserved1[2];
+
+ /* 0x020 */
+ uint reserved2[56];
+
+ /* 0x100 */
+ u16 cap_length;
+ u16 hci_version;
+ uint hcs_params;
+ uint hcc_params;
+ uint reserved3[5];
+
+ /* 0x120 */
+ uint dci_version;
+ uint dcc_params;
+ uint reserved4[6];
+
+ /* 0x140 */
+ uint usb_cmd;
+ uint usb_sts;
+ uint usb_intr;
+ uint frindex;
+
+ /* 0x150 */
+ uint reserved5;
+ uint periodic_list_base;
+ uint async_list_addr;
+ uint async_tt_sts;
+
+ /* 0x160 */
+ uint burst_size;
+ uint tx_fill_tuning;
+ uint reserved6; /* is this port_sc1 on some controllers? */
+ uint icusb_ctrl;
+
+ /* 0x170 */
+ uint ulpi_viewport;
+ uint reserved7;
+ uint endpt_nak;
+ uint endpt_nak_enable;
+
+ /* 0x180 */
+ uint reserved;
+ uint port_sc1;
+ uint reserved8[6];
+
+ /* 0x1a0 */
+ uint reserved9;
+ uint otgsc;
+ uint usb_mode;
+ uint endpt_setup_stat;
+
+ /* 0x1b0 */
+ uint reserved10[20];
+
+ /* 0x200 */
+ uint reserved11[0x80];
+
+ /* 0x400 */
+ uint susp_ctrl;
+ uint phy_vbus_sensors;
+ uint phy_vbus_wakeup_id;
+ uint phy_alt_vbus_sys;
+
+ /* 0x410 */
+ uint usb1_legacy_ctrl;
+ uint reserved12[3];
+
+ /* 0x420 */
+ uint reserved13[56];
+
+ /* 0x500 */
+ uint reserved14[64 * 3];
+
+ /* 0x800 */
+ uint utmip_pll_cfg0;
+ uint utmip_pll_cfg1;
+ uint utmip_xcvr_cfg0;
+ uint utmip_bias_cfg0;
+
+ /* 0x810 */
+ uint utmip_hsrx_cfg0;
+ uint utmip_hsrx_cfg1;
+ uint utmip_fslsrx_cfg0;
+ uint utmip_fslsrx_cfg1;
+
+ /* 0x820 */
+ uint utmip_tx_cfg0;
+ uint utmip_misc_cfg0;
+ uint utmip_misc_cfg1;
+ uint utmip_debounce_cfg0;
+
+ /* 0x830 */
+ uint utmip_bat_chrg_cfg0;
+ uint utmip_spare_cfg0;
+ uint utmip_xcvr_cfg1;
+ uint utmip_bias_cfg1;
+};
+
+
+/* USB1_LEGACY_CTRL */
+#define USB1_NO_LEGACY_MODE 1
+
+#define VBUS_SENSE_CTL_SHIFT 1
+#define VBUS_SENSE_CTL_MASK (3 << VBUS_SENSE_CTL_SHIFT)
+#define VBUS_SENSE_CTL_VBUS_WAKEUP 0
+#define VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP 1
+#define VBUS_SENSE_CTL_AB_SESS_VLD 2
+#define VBUS_SENSE_CTL_A_SESS_VLD 3
+
+/* USBx_IF_USB_SUSP_CTRL_0 */
+#define UTMIP_PHY_ENB (1 << 12)
+#define UTMIP_RESET (1 << 11)
+#define USB_PHY_CLK_VALID (1 << 7)
+
+/* USBx_UTMIP_MISC_CFG1 */
+#define UTMIP_PLLU_STABLE_COUNT_SHIFT 6
+#define UTMIP_PLLU_STABLE_COUNT_MASK \
+ (0xfff << UTMIP_PLLU_STABLE_COUNT_SHIFT)
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT 18
+#define UTMIP_PLL_ACTIVE_DLY_COUNT_MASK \
+ (0x1f << UTMIP_PLL_ACTIVE_DLY_COUNT_SHIFT)
+#define UTMIP_PHY_XTAL_CLOCKEN (1 << 30)
+
+/* USBx_UTMIP_PLL_CFG1_0 */
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT 27
+#define UTMIP_PLLU_ENABLE_DLY_COUNT_MASK \
+ (0xf << UTMIP_PLLU_ENABLE_DLY_COUNT_SHIFT)
+#define UTMIP_XTAL_FREQ_COUNT_SHIFT 0
+#define UTMIP_XTAL_FREQ_COUNT_MASK 0xfff
+
+/* USBx_UTMIP_BIAS_CFG1_0 */
+#define UTMIP_BIAS_PDTRK_COUNT_SHIFT 3
+#define UTMIP_BIAS_PDTRK_COUNT_MASK \
+ (0x1f << UTMIP_BIAS_PDTRK_COUNT_SHIFT)
+
+#define UTMIP_DEBOUNCE_CFG0_SHIFT 0
+#define UTMIP_DEBOUNCE_CFG0_MASK 0xffff
+
+/* USBx_UTMIP_TX_CFG0_0 */
+#define UTMIP_FS_PREAMBLE_J (1 << 19)
+
+/* USBx_UTMIP_BAT_CHRG_CFG0_0 */
+#define UTMIP_PD_CHRG 1
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_XCVR_LSBIAS_SE (1 << 21)
+
+/* USBx_UTMIP_SPARE_CFG0_0 */
+#define FUSE_SETUP_SEL (1 << 3)
+
+/* USBx_UTMIP_HSRX_CFG0_0 */
+#define UTMIP_IDLE_WAIT_SHIFT 15
+#define UTMIP_IDLE_WAIT_MASK (0x1f << UTMIP_IDLE_WAIT_SHIFT)
+#define UTMIP_ELASTIC_LIMIT_SHIFT 10
+#define UTMIP_ELASTIC_LIMIT_MASK \
+ (0x1f << UTMIP_ELASTIC_LIMIT_SHIFT)
+
+/* USBx_UTMIP_HSRX_CFG0_1 */
+#define UTMIP_HS_SYNC_START_DLY_SHIFT 1
+#define UTMIP_HS_SYNC_START_DLY_MASK \
+ (0xf << UTMIP_HS_SYNC_START_DLY_SHIFT)
+
+/* USBx_CONTROLLER_2_USB2D_ICUSB_CTRL_0 */
+#define IC_ENB1 (1 << 3)
+
+/* SB2_CONTROLLER_2_USB2D_PORTSC1_0 */
+#define PTS_SHIFT 30
+#define PTS_MASK (3U << PTS_SHIFT)
+#define PTS_UTMI 0
+#define PTS_RESERVED 1
+#define PTS_ULP 2
+#define PTS_ICUSB_SER 3
+
+#define STS (1 << 29)
+
+/* USBx_UTMIP_XCVR_CFG0_0 */
+#define UTMIP_FORCE_PD_POWERDOWN (1 << 14)
+#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16)
+#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18)
+
+/* USBx_UTMIP_XCVR_CFG1_0 */
+#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0)
+#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2)
+#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4)
+
+/* USB3_IF_USB_PHY_VBUS_SENSORS_0 */
+#define VBUS_VLD_STS (1 << 26)
+
+
+/* Change the USB host port into host mode */
+void usb_set_host_mode(void);
+
+/* Setup USB on the board */
+int board_usb_init(const void *blob);
+
+/**
+ * Start up the given port number (ports are numbered from 0 on each board).
+ * This returns values for the appropriate hccr and hcor addresses to use for
+ * USB EHCI operations.
+ *
+ * @param portnum port number to start
+ * @param hccr returns start address of EHCI HCCR registers
+ * @param hcor returns start address of EHCI HCOR registers
+ * @return 0 if ok, -1 on error (generally invalid port number)
+ */
+int tegrausb_start_port(unsigned portnum, u32 *hccr, u32 *hcor);
+
+/**
+ * Stop the current port
+ *
+ * @return 0 if ok, -1 if no port was active
+ */
+int tegrausb_stop_port(void);
+
+#endif /* _TEGRA_USB_H_ */
--- /dev/null
+/*
+ * (C) Copyright 2010, 2011
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _WARM_BOOT_H_
+#define _WARM_BOOT_H_
+
+#define STRAP_OPT_A_RAM_CODE_SHIFT 4
+#define STRAP_OPT_A_RAM_CODE_MASK (0xf << STRAP_OPT_A_RAM_CODE_SHIFT)
+
+/* Defines the supported operating modes */
+enum fuse_operating_mode {
+ MODE_PRODUCTION = 3,
+ MODE_UNDEFINED,
+};
+
+/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */
+enum {
+ HASH_LENGTH = 4
+};
+
+/* Defines the storage for a hash value (128 bits) */
+struct hash {
+ u32 hash[HASH_LENGTH];
+};
+
+/*
+ * Defines the code header information for the boot rom.
+ *
+ * The code immediately follows the code header.
+ *
+ * Note that the code header needs to be 16 bytes aligned to preserve
+ * the alignment of relevant data for hash and decryption computations without
+ * requiring extra copies to temporary memory areas.
+ */
+struct wb_header {
+ u32 length_insecure; /* length of the code header */
+ u32 reserved[3];
+ struct hash hash; /* hash of header+code, starts next field*/
+ struct hash random_aes_block; /* a data block to aid security. */
+ u32 length_secure; /* length of the code header */
+ u32 destination; /* destination address to put the wb code */
+ u32 entry_point; /* execution address of the wb code */
+ u32 code_length; /* length of the code */
+};
+
+/*
+ * The warm boot code needs direct access to these registers since it runs in
+ * SRAM and cannot call other U-Boot code.
+ */
+union osc_ctrl_reg {
+ struct {
+ u32 xoe:1;
+ u32 xobp:1;
+ u32 reserved0:2;
+ u32 xofs:6;
+ u32 reserved1:2;
+ u32 xods:5;
+ u32 reserved2:3;
+ u32 oscfi_spare:8;
+ u32 pll_ref_div:2;
+ u32 osc_freq:2;
+ };
+ u32 word;
+};
+
+union pllx_base_reg {
+ struct {
+ u32 divm:5;
+ u32 reserved0:3;
+ u32 divn:10;
+ u32 reserved1:2;
+ u32 divp:3;
+ u32 reserved2:4;
+ u32 lock:1;
+ u32 reserved3:1;
+ u32 ref_dis:1;
+ u32 enable:1;
+ u32 bypass:1;
+ };
+ u32 word;
+};
+
+union pllx_misc_reg {
+ struct {
+ u32 vcocon:4;
+ u32 lfcon:4;
+ u32 cpcon:4;
+ u32 lock_sel:6;
+ u32 reserved0:1;
+ u32 lock_enable:1;
+ u32 reserved1:1;
+ u32 dccon:1;
+ u32 pts:2;
+ u32 reserved2:6;
+ u32 out1_div_byp:1;
+ u32 out1_inv_clk:1;
+ };
+ u32 word;
+};
+
+/*
+ * TODO: This register is not documented in the TRM yet. We could move this
+ * into the EMC and give it a proper interface, but not while it is
+ * undocumented.
+ */
+union scratch3_reg {
+ struct {
+ u32 pllx_base_divm:5;
+ u32 pllx_base_divn:10;
+ u32 pllx_base_divp:3;
+ u32 pllx_misc_lfcon:4;
+ u32 pllx_misc_cpcon:4;
+ };
+ u32 word;
+};
+
+
+/**
+ * Save warmboot memory settings for a later resume
+ *
+ * @return 0 if ok, -1 on error
+ */
+int warmboot_save_sdram_params(void);
+
+int warmboot_prepare_code(u32 seg_address, u32 seg_length);
+int sign_data_block(u8 *source, u32 length, u8 *signature);
+void wb_start(void); /* Start of WB assembly code */
+void wb_end(void); /* End of WB assembly code */
+
+#endif
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/board.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
pin_mux_mmc();
/* init dev 0, SD slot, with 4-bit bus */
- tegra2_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+ tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
return 0;
}
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "Avionic Design Medcom-Wide";
- compatible = "avionic-design,medcom", "nvidia,tegra20";
-
- aliases {
- usb0 = "/usb@c5008000";
- };
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- clocks {
- clk_32k: clk_32k {
- clock-frequency = <32000>;
- };
-
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006300 {
- clock-frequency = <216000000>;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- status = "disabled";
- };
-
- usb@c5000000 {
- status = "disabled";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "Avionic Design Plutux";
- compatible = "avionic-design,plutux", "nvidia,tegra20";
-
- aliases {
- usb0 = "/usb@c5008000";
- };
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- clocks {
- clk_32k: clk_32k {
- clock-frequency = <32000>;
- };
-
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006300 {
- clock-frequency = <216000000>;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- status = "disabled";
- };
-
- usb@c5000000 {
- status = "disabled";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "Avionic Design Tamonten Evaluation Carrier";
- compatible = "avionic-design,tec", "nvidia,tegra20";
-
- aliases {
- usb0 = "/usb@c5008000";
- };
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- clocks {
- clk_32k: clk_32k {
- clock-frequency = <32000>;
- };
-
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006300 {
- clock-frequency = <216000000>;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- status = "disabled";
- };
-
- usb@c5000000 {
- status = "disabled";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Avionic Design Medcom-Wide";
+ compatible = "avionic-design,medcom", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ };
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ clocks {
+ clk_32k: clk_32k {
+ clock-frequency = <32000>;
+ };
+
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006300 {
+ clock-frequency = <216000000>;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ status = "disabled";
+ };
+
+ usb@c5000000 {
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Avionic Design Plutux";
+ compatible = "avionic-design,plutux", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ };
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ clocks {
+ clk_32k: clk_32k {
+ clock-frequency = <32000>;
+ };
+
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006300 {
+ clock-frequency = <216000000>;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ status = "disabled";
+ };
+
+ usb@c5000000 {
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Avionic Design Tamonten Evaluation Carrier";
+ compatible = "avionic-design,tec", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ };
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ clocks {
+ clk_32k: clk_32k {
+ clock-frequency = <32000>;
+ };
+
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006300 {
+ clock-frequency = <216000000>;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ status = "disabled";
+ };
+
+ usb@c5000000 {
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "Toshiba AC100 / Dynabook AZ";
- compatible = "compal,paz00", "nvidia,tegra20";
-
- aliases {
- usb0 = "/usb@c5008000";
- };
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- clocks {
- clk_32k: clk_32k {
- clock-frequency = <32000>;
- };
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006000 {
- clock-frequency = < 216000000 >;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- status = "disabled";
- };
-
- usb@c5000000 {
- status = "disabled";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Toshiba AC100 / Dynabook AZ";
+ compatible = "compal,paz00", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ };
+
+ memory {
+ reg = <0x00000000 0x20000000>;
+ };
+
+ clocks {
+ clk_32k: clk_32k {
+ clock-frequency = <32000>;
+ };
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006000 {
+ clock-frequency = < 216000000 >;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ status = "disabled";
+ };
+
+ usb@c5000000 {
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/mmc.h>
#include <asm/gpio.h>
debug("board_mmc_init: init eMMC\n");
/* init dev 0, eMMC chip, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra2_mmc_init(0, 4, -1, -1);
+ tegra20_mmc_init(0, 4, -1, -1);
debug("board_mmc_init: init SD slot\n");
/* init dev 3, SD slot, with 4-bit bus */
- tegra2_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
+ tegra20_mmc_init(3, 4, GPIO_PV1, GPIO_PV5);
return 0;
}
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "Compulab TrimSlice board";
- compatible = "compulab,trimslice", "nvidia,tegra20";
-
- aliases {
- usb0 = "/usb@c5008000";
- };
-
- memory {
- reg = <0x00000000 0x40000000>;
- };
-
- clocks {
- clk_32k: clk_32k {
- clock-frequency = <32000>;
- };
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006000 {
- clock-frequency = <216000000>;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- status = "disabled";
- };
-
- usb@c5000000 {
- status = "disabled";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "Compulab TrimSlice board";
+ compatible = "compulab,trimslice", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ };
+
+ memory {
+ reg = <0x00000000 0x40000000>;
+ };
+
+ clocks {
+ clk_32k: clk_32k {
+ clock-frequency = <32000>;
+ };
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006000 {
+ clock-frequency = <216000000>;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ status = "disabled";
+ };
+
+ usb@c5000000 {
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
pin_mux_mmc();
/* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */
- tegra2_mmc_init(0, 4, -1, GPIO_PP1);
+ tegra20_mmc_init(0, 4, -1, GPIO_PP1);
/* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */
- tegra2_mmc_init(3, 4, -1, -1);
+ tegra20_mmc_init(3, 4, -1, -1);
return 0;
}
#include <ns16550.h>
#include <linux/compiler.h>
#include <asm/io.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/board.h>
DECLARE_GLOBAL_DATA_PTR;
-const struct tegra2_sysinfo sysinfo = {
- CONFIG_TEGRA2_BOARD_STRING
+const struct tegra20_sysinfo sysinfo = {
+ CONFIG_TEGRA20_BOARD_STRING
};
/*
*/
static void power_det_init(void)
{
-#if defined(CONFIG_TEGRA2)
- struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
+#if defined(CONFIG_TEGRA20)
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE;
/* turn off power detects */
writel(0, &pmc->pmc_pwr_det_latch);
board_usb_init(gd->fdt_blob);
#endif
-#ifdef CONFIG_TEGRA2_LP0
+#ifdef CONFIG_TEGRA20_LP0
/* prepare the WB code to LP0 location */
warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
#endif
#include <asm/arch/emc.h>
#include <asm/arch/pmu.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
DECLARE_GLOBAL_DATA_PTR;
#include <asm/gpio.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/uart-spi-switch.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/tegra_spi.h>
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "NVIDIA Tegra2 Harmony evaluation board";
- compatible = "nvidia,harmony", "nvidia,tegra20";
-
- aliases {
- usb0 = "/usb@c5008000";
- };
-
- memory {
- reg = <0x00000000 0x40000000>;
- };
-
- clocks {
- clk_32k: clk_32k {
- clock-frequency = <32000>;
- };
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006300 {
- clock-frequency = < 216000000 >;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- status = "disabled";
- };
-
- usb@c5000000 {
- status = "disabled";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/memreserve/ 0x1c000000 0x04000000;
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "NVIDIA Seaboard";
- compatible = "nvidia,seaboard", "nvidia,tegra20";
-
- chosen {
- bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
- };
-
- aliases {
- /* This defines the order of our USB ports */
- usb0 = "/usb@c5008000";
- usb1 = "/usb@c5000000";
-
- i2c0 = "/i2c@7000d000";
- i2c1 = "/i2c@7000c000";
- i2c2 = "/i2c@7000c400";
- i2c3 = "/i2c@7000c500";
- };
-
- memory {
- device_type = "memory";
- reg = < 0x00000000 0x40000000 >;
- };
-
- /* This is not used in U-Boot, but is expected to be in kernel .dts */
- i2c@7000d000 {
- clock-frequency = <100000>;
- pmic@34 {
- compatible = "ti,tps6586x";
- reg = <0x34>;
-
- clk_32k: clock {
- compatible = "fixed-clock";
- /*
- * leave out for now due to CPP:
- * #clock-cells = <0>;
- */
- clock-frequency = <32768>;
- };
- };
- };
-
- clocks {
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006300 {
- clock-frequency = < 216000000 >;
- };
-
- sdhci@c8000400 {
- cd-gpios = <&gpio 69 0>; /* gpio PI5 */
- wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 70 0>; /* gpio PI6 */
- };
-
- sdhci@c8000600 {
- support-8bit;
- };
-
- usb@c5000000 {
- nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
- dr_mode = "otg";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-
- i2c@7000c000 {
- clock-frequency = <100000>;
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- clock-frequency = <100000>;
- };
-
- emc@7000f400 {
- emc-table@190000 {
- reg = < 190000 >;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = < 190000 >;
- nvidia,emc-registers = < 0x0000000c 0x00000026
- 0x00000009 0x00000003 0x00000004 0x00000004
- 0x00000002 0x0000000c 0x00000003 0x00000003
- 0x00000002 0x00000001 0x00000004 0x00000005
- 0x00000004 0x00000009 0x0000000d 0x0000059f
- 0x00000000 0x00000003 0x00000003 0x00000003
- 0x00000003 0x00000001 0x0000000b 0x000000c8
- 0x00000003 0x00000007 0x00000004 0x0000000f
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0xa06204ae
- 0x007dc010 0x00000000 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000 >;
- };
- emc-table@380000 {
- reg = < 380000 >;
- compatible = "nvidia,tegra20-emc-table";
- clock-frequency = < 380000 >;
- nvidia,emc-registers = < 0x00000017 0x0000004b
- 0x00000012 0x00000006 0x00000004 0x00000005
- 0x00000003 0x0000000c 0x00000006 0x00000006
- 0x00000003 0x00000001 0x00000004 0x00000005
- 0x00000004 0x00000009 0x0000000d 0x00000b5f
- 0x00000000 0x00000003 0x00000003 0x00000006
- 0x00000006 0x00000001 0x00000011 0x000000c8
- 0x00000003 0x0000000e 0x00000007 0x0000000f
- 0x00000002 0x00000000 0x00000000 0x00000002
- 0x00000000 0x00000000 0x00000083 0xe044048b
- 0x007d8010 0x00000000 0x00000000 0x00000000
- 0x00000000 0x00000000 0x00000000 0x00000000 >;
- };
- };
-
- kbc@7000e200 {
- linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c
- 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006
- 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020
- 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023
- 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a
- 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031
- 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018
- 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032
- 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036
- 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019
- 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044
- 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067
- 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068
- 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057
- 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d
- 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f
- 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040
- 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f
- 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050
- 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053
- 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072
- 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071
- 0x1f04008a>;
- linux,fn-keymap = <0x05040002>;
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "NVIDIA Tegra2 Ventana evaluation board";
- compatible = "nvidia,ventana", "nvidia,tegra20";
-
- aliases {
- usb0 = "/usb@c5008000";
- };
-
- memory {
- reg = <0x00000000 0x40000000>;
- };
-
- clocks {
- clk_32k: clk_32k {
- clock-frequency = <32000>;
- };
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006300 {
- clock-frequency = < 216000000 >;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- status = "disabled";
- };
-
- usb@c5000000 {
- status = "disabled";
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
+++ /dev/null
-/dts-v1/;
-
-/include/ ARCH_CPU_DTS
-
-/ {
- model = "NVIDIA Tegra2 Whistler evaluation board";
- compatible = "nvidia,whistler", "nvidia,tegra20";
-
- aliases {
- i2c0 = "/i2c@7000d000";
- usb0 = "/usb@c5008000";
- usb1 = "/usb@c5000000";
- };
-
- memory {
- device_type = "memory";
- reg = < 0x00000000 0x20000000 >;
- };
-
- clocks {
- osc {
- clock-frequency = <12000000>;
- };
- };
-
- clock@60006000 {
- clocks = <&clk_32k &osc>;
- };
-
- serial@70006000 {
- clock-frequency = < 216000000 >;
- };
-
- i2c@7000c000 {
- status = "disabled";
- };
-
- i2c@7000c400 {
- status = "disabled";
- };
-
- i2c@7000c500 {
- status = "disabled";
- };
-
- i2c@7000d000 {
- clock-frequency = <100000>;
-
- pmic@3c {
- compatible = "maxim,max8907b";
- reg = <0x3c>;
-
- clk_32k: clock {
- compatible = "fixed-clock";
- /*
- * leave out for now due to CPP:
- * #clock-cells = <0>;
- */
- clock-frequency = <32768>;
- };
- };
- };
-
- usb@c5004000 {
- status = "disabled";
- };
-};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "NVIDIA Tegra20 Harmony evaluation board";
+ compatible = "nvidia,harmony", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ };
+
+ memory {
+ reg = <0x00000000 0x40000000>;
+ };
+
+ clocks {
+ clk_32k: clk_32k {
+ clock-frequency = <32000>;
+ };
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ status = "disabled";
+ };
+
+ usb@c5000000 {
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/memreserve/ 0x1c000000 0x04000000;
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "NVIDIA Seaboard";
+ compatible = "nvidia,seaboard", "nvidia,tegra20";
+
+ chosen {
+ bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait";
+ };
+
+ aliases {
+ /* This defines the order of our USB ports */
+ usb0 = "/usb@c5008000";
+ usb1 = "/usb@c5000000";
+
+ i2c0 = "/i2c@7000d000";
+ i2c1 = "/i2c@7000c000";
+ i2c2 = "/i2c@7000c400";
+ i2c3 = "/i2c@7000c500";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x00000000 0x40000000 >;
+ };
+
+ /* This is not used in U-Boot, but is expected to be in kernel .dts */
+ i2c@7000d000 {
+ clock-frequency = <100000>;
+ pmic@34 {
+ compatible = "ti,tps6586x";
+ reg = <0x34>;
+
+ clk_32k: clock {
+ compatible = "fixed-clock";
+ /*
+ * leave out for now due to CPP:
+ * #clock-cells = <0>;
+ */
+ clock-frequency = <32768>;
+ };
+ };
+ };
+
+ clocks {
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ sdhci@c8000400 {
+ cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+ wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+ power-gpios = <&gpio 70 0>; /* gpio PI6 */
+ };
+
+ sdhci@c8000600 {
+ support-8bit;
+ };
+
+ usb@c5000000 {
+ nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+ dr_mode = "otg";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+
+ i2c@7000c000 {
+ clock-frequency = <100000>;
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ clock-frequency = <100000>;
+ };
+
+ emc@7000f400 {
+ emc-table@190000 {
+ reg = < 190000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 190000 >;
+ nvidia,emc-registers = < 0x0000000c 0x00000026
+ 0x00000009 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x0000059f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000b 0x000000c8
+ 0x00000003 0x00000007 0x00000004 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xa06204ae
+ 0x007dc010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+ emc-table@380000 {
+ reg = < 380000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 380000 >;
+ nvidia,emc-registers = < 0x00000017 0x0000004b
+ 0x00000012 0x00000006 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000b5f
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe044048b
+ 0x007d8010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+ };
+
+ kbc@7000e200 {
+ linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c
+ 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006
+ 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020
+ 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023
+ 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a
+ 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031
+ 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018
+ 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032
+ 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036
+ 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019
+ 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044
+ 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067
+ 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068
+ 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057
+ 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d
+ 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f
+ 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040
+ 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f
+ 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050
+ 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053
+ 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072
+ 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071
+ 0x1f04008a>;
+ linux,fn-keymap = <0x05040002>;
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "NVIDIA Tegra20 Ventana evaluation board";
+ compatible = "nvidia,ventana", "nvidia,tegra20";
+
+ aliases {
+ usb0 = "/usb@c5008000";
+ };
+
+ memory {
+ reg = <0x00000000 0x40000000>;
+ };
+
+ clocks {
+ clk_32k: clk_32k {
+ clock-frequency = <32000>;
+ };
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006300 {
+ clock-frequency = < 216000000 >;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ status = "disabled";
+ };
+
+ usb@c5000000 {
+ status = "disabled";
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
--- /dev/null
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+ model = "NVIDIA Tegra20 Whistler evaluation board";
+ compatible = "nvidia,whistler", "nvidia,tegra20";
+
+ aliases {
+ i2c0 = "/i2c@7000d000";
+ usb0 = "/usb@c5008000";
+ usb1 = "/usb@c5000000";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x00000000 0x20000000 >;
+ };
+
+ clocks {
+ osc {
+ clock-frequency = <12000000>;
+ };
+ };
+
+ clock@60006000 {
+ clocks = <&clk_32k &osc>;
+ };
+
+ serial@70006000 {
+ clock-frequency = < 216000000 >;
+ };
+
+ i2c@7000c000 {
+ status = "disabled";
+ };
+
+ i2c@7000c400 {
+ status = "disabled";
+ };
+
+ i2c@7000c500 {
+ status = "disabled";
+ };
+
+ i2c@7000d000 {
+ clock-frequency = <100000>;
+
+ pmic@3c {
+ compatible = "maxim,max8907b";
+ reg = <0x3c>;
+
+ clk_32k: clock {
+ compatible = "fixed-clock";
+ /*
+ * leave out for now due to CPP:
+ * #clock-cells = <0>;
+ */
+ clock-frequency = <32768>;
+ };
+ };
+ };
+
+ usb@c5004000 {
+ status = "disabled";
+ };
+};
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
debug("board_mmc_init: init SD slot J26\n");
/* init dev 0, SD slot J26, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra2_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
+ tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2);
debug("board_mmc_init: init SD slot J5\n");
/* init dev 2, SD slot J5, with 4-bit bus */
- tegra2_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
+ tegra20_mmc_init(2, 4, GPIO_PT3, GPIO_PI5);
return 0;
}
#include <common.h>
#include <asm/io.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
debug("board_mmc_init: init eMMC\n");
/* init dev 0, eMMC chip, with 4-bit bus */
/* The board has an 8-bit bus, but 8-bit doesn't work yet */
- tegra2_mmc_init(0, 4, -1, -1);
+ tegra20_mmc_init(0, 4, -1, -1);
debug("board_mmc_init: init SD slot\n");
/* init dev 1, SD slot, with 4-bit bus */
- tegra2_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
+ tegra20_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
return 0;
}
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/pinmux.h>
pin_mux_mmc();
/* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */
- tegra2_mmc_init(0, 8, -1, -1);
+ tegra20_mmc_init(0, 8, -1, -1);
/* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */
- tegra2_mmc_init(1, 8, -1, -1);
+ tegra20_mmc_init(1, 8, -1, -1);
return 0;
}
smdk5250 arm armv7 smdk5250 samsung exynos
smdkv310 arm armv7 smdkv310 samsung exynos
trats arm armv7 trats samsung exynos
-harmony arm armv7 harmony nvidia tegra2
-seaboard arm armv7 seaboard nvidia tegra2
-ventana arm armv7 ventana nvidia tegra2
-whistler arm armv7 whistler nvidia tegra2
+harmony arm armv7 harmony nvidia tegra20
+seaboard arm armv7 seaboard nvidia tegra20
+ventana arm armv7 ventana nvidia tegra20
+whistler arm armv7 whistler nvidia tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
zipitz2 arm pxa
colibri_pxa270 arm pxa - toradex
jornada arm sa1100
-plutux arm armv7 plutux avionic-design tegra2
-medcom arm armv7 medcom avionic-design tegra2
-tec arm armv7 tec avionic-design tegra2
-paz00 arm armv7 paz00 compal tegra2
-trimslice arm armv7 trimslice compulab tegra2
+plutux arm armv7 plutux avionic-design tegra20
+medcom arm armv7 medcom avionic-design tegra20
+tec arm armv7 tec avionic-design tegra20
+paz00 arm armv7 paz00 compal tegra20
+trimslice arm armv7 trimslice compulab tegra20
atngw100 avr32 at32ap - atmel at32ap700x
atstk1002 avr32 at32ap atstk1000 atmel at32ap700x
atstk1003 avr32 at32ap atstk1000 atmel at32ap700x
/*
- * NVIDIA Tegra2 GPIO handling.
+ * NVIDIA Tegra20 GPIO handling.
* (C) Copyright 2010-2012
* NVIDIA Corporation <www.nvidia.com>
*
#include <common.h>
#include <asm/io.h>
#include <asm/bitops.h>
-#include <asm/arch/tegra2.h>
+#include <asm/arch/tegra20.h>
#include <asm/gpio.h>
enum {
- TEGRA2_CMD_INFO,
- TEGRA2_CMD_PORT,
- TEGRA2_CMD_OUTPUT,
- TEGRA2_CMD_INPUT,
+ TEGRA20_CMD_INFO,
+ TEGRA20_CMD_PORT,
+ TEGRA20_CMD_OUTPUT,
+ TEGRA20_CMD_INPUT,
};
static struct gpio_names {
return error;
}
-static int tegra2_i2c_write_data(u32 addr, u8 *data, u32 len)
+static int tegra20_i2c_write_data(u32 addr, u8 *data, u32 len)
{
int error;
struct i2c_trans_info trans_info;
error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
if (error)
- debug("tegra2_i2c_write_data: Error (%d) !!!\n", error);
+ debug("tegra20_i2c_write_data: Error (%d) !!!\n", error);
return error;
}
-static int tegra2_i2c_read_data(u32 addr, u8 *data, u32 len)
+static int tegra20_i2c_read_data(u32 addr, u8 *data, u32 len)
{
int error;
struct i2c_trans_info trans_info;
error = send_recv_packets(&i2c_controllers[i2c_bus_num], &trans_info);
if (error)
- debug("tegra2_i2c_read_data: Error (%d) !!!\n", error);
+ debug("tegra20_i2c_read_data: Error (%d) !!!\n", error);
return error;
}
debug("\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra2_i2c_write_data(chip << 1, buffer, len);
+ rc = tegra20_i2c_write_data(chip << 1, buffer, len);
if (rc)
debug("i2c_write_data(): rc=%d\n", rc);
debug("inside i2c_read_data():\n");
/* Shift 7-bit address over for lower-level i2c functions */
- rc = tegra2_i2c_read_data(chip << 1, buffer, len);
+ rc = tegra20_i2c_read_data(chip << 1, buffer, len);
if (rc) {
debug("i2c_read_data(): rc=%d\n", rc);
return rc;
LIB := $(obj)libinput.o
COBJS-$(CONFIG_I8042_KBD) += i8042.o
-COBJS-$(CONFIG_TEGRA2_KEYBOARD) += tegra-kbc.o
+COBJS-$(CONFIG_TEGRA20_KEYBOARD) += tegra-kbc.o
ifdef CONFIG_PS2KBD
COBJS-y += keyboard.o pc_keyb.o
COBJS-$(CONFIG_PS2MULT) += ps2mult.o ps2ser.o
* @param host Structure to fill in (base, reg, mmc_id)
* @param dev_index Device index (0-3)
*/
-static void tegra2_get_setup(struct mmc_host *host, int dev_index)
+static void tegra20_get_setup(struct mmc_host *host, int dev_index)
{
- debug("tegra2_get_base_mmc: dev_index = %d\n", dev_index);
+ debug("tegra20_get_base_mmc: dev_index = %d\n", dev_index);
switch (dev_index) {
case 1:
- host->base = TEGRA2_SDMMC3_BASE;
+ host->base = TEGRA20_SDMMC3_BASE;
host->mmc_id = PERIPH_ID_SDMMC3;
break;
case 2:
- host->base = TEGRA2_SDMMC2_BASE;
+ host->base = TEGRA20_SDMMC2_BASE;
host->mmc_id = PERIPH_ID_SDMMC2;
break;
case 3:
- host->base = TEGRA2_SDMMC1_BASE;
+ host->base = TEGRA20_SDMMC1_BASE;
host->mmc_id = PERIPH_ID_SDMMC1;
break;
case 0:
default:
- host->base = TEGRA2_SDMMC4_BASE;
+ host->base = TEGRA20_SDMMC4_BASE;
host->mmc_id = PERIPH_ID_SDMMC4;
break;
}
- host->reg = (struct tegra2_mmc *)host->base;
+ host->reg = (struct tegra20_mmc *)host->base;
}
static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data)
debug(" mmc_change_clock called\n");
/*
- * Change Tegra2 SDMMCx clock divisor here. Source is 216MHz,
+ * Change Tegra20 SDMMCx clock divisor here. Source is 216MHz,
* PLLP_OUT0
*/
if (clock == 0)
return 0;
}
-int tegra2_mmc_getcd(struct mmc *mmc)
+int tegra20_mmc_getcd(struct mmc *mmc)
{
struct mmc_host *host = (struct mmc_host *)mmc->priv;
- debug("tegra2_mmc_getcd called\n");
+ debug("tegra20_mmc_getcd called\n");
if (host->cd_gpio >= 0)
return !gpio_get_value(host->cd_gpio);
return 1;
}
-int tegra2_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
+int tegra20_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)
{
struct mmc_host *host;
char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */
struct mmc *mmc;
- debug(" tegra2_mmc_init: index %d, bus width %d "
+ debug(" tegra20_mmc_init: index %d, bus width %d "
"pwr_gpio %d cd_gpio %d\n",
dev_index, bus_width, pwr_gpio, cd_gpio);
host->clock = 0;
host->pwr_gpio = pwr_gpio;
host->cd_gpio = cd_gpio;
- tegra2_get_setup(host, dev_index);
+ tegra20_get_setup(host, dev_index);
clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000);
mmc = &mmc_dev[dev_index];
- sprintf(mmc->name, "Tegra2 SD/MMC");
+ sprintf(mmc->name, "Tegra20 SD/MMC");
mmc->priv = host;
mmc->send_cmd = mmc_send_cmd;
mmc->set_ios = mmc_set_ios;
mmc->init = mmc_core_init;
- mmc->getcd = tegra2_mmc_getcd;
+ mmc->getcd = tegra20_mmc_getcd;
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
if (bus_width == 8)
* max freq is highest HS eMMC clock as per the SD/MMC spec
* (actually 52MHz)
* Both of these are the closest equivalents w/216MHz source
- * clock and Tegra2 SDMMC divisors.
+ * clock and Tegra20 SDMMC divisors.
*/
mmc->f_min = 375000;
mmc->f_max = 48000000;
#ifndef __TEGRA_MMC_H_
#define __TEGRA_MMC_H_
-#define TEGRA2_SDMMC1_BASE 0xC8000000
-#define TEGRA2_SDMMC2_BASE 0xC8000200
-#define TEGRA2_SDMMC3_BASE 0xC8000400
-#define TEGRA2_SDMMC4_BASE 0xC8000600
+#define TEGRA20_SDMMC1_BASE 0xC8000000
+#define TEGRA20_SDMMC2_BASE 0xC8000200
+#define TEGRA20_SDMMC3_BASE 0xC8000400
+#define TEGRA20_SDMMC4_BASE 0xC8000600
#ifndef __ASSEMBLY__
-struct tegra2_mmc {
+struct tegra20_mmc {
unsigned int sysad; /* _SYSTEM_ADDRESS_0 */
unsigned short blksize; /* _BLOCK_SIZE_BLOCK_COUNT_0 15:00 */
unsigned short blkcnt; /* _BLOCK_SIZE_BLOCK_COUNT_0 31:16 */
#define TEGRA_MMC_NORINTSIGEN_XFER_COMPLETE (1 << 1)
struct mmc_host {
- struct tegra2_mmc *reg;
+ struct tegra20_mmc *reg;
unsigned int version; /* SDHCI spec. version */
unsigned int clock; /* Current clock (MHz) */
unsigned int base; /* Base address, SDMMC1/2/3/4 */
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
{
- /* Tegra2 SPI-Flash - only 1 device ('bus/cs') */
+ /* Tegra20 SPI-Flash - only 1 device ('bus/cs') */
if (bus != 0 || cs != 0)
return 0;
else
return NULL;
}
- if (max_hz > TEGRA2_SPI_MAX_FREQ) {
+ if (max_hz > TEGRA20_SPI_MAX_FREQ) {
printf("SPI error: unsupported frequency %d Hz. Max frequency"
- " is %d Hz\n", max_hz, TEGRA2_SPI_MAX_FREQ);
+ " is %d Hz\n", max_hz, TEGRA20_SPI_MAX_FREQ);
return NULL;
}
spi->slave.bus = bus;
spi->slave.cs = cs;
spi->freq = max_hz;
- spi->regs = (struct spi_tegra *)TEGRA2_SPI_BASE;
+ spi->regs = (struct spi_tegra *)TEGRA20_SPI_BASE;
spi->mode = mode;
return &spi->slave;
debug("spi_init: COMMAND = %08x\n", readl(®s->command));
/*
- * SPI pins on Tegra2 are muxed - change pinmux later due to UART
+ * SPI pins on Tegra20 are muxed - change pinmux later due to UART
* issue.
*/
pinmux_set_func(PINGRP_GMD, PMUX_FUNC_SFLASH);
#define __CONFIG_H
#include <asm/sizes.h>
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for Harmony. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-harmony
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-harmony
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (Harmony) # "
-#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Harmony"
+#define V_PROMPT "Tegra20 (Harmony) # "
+#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Harmony"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD
+#define CONFIG_TEGRA20_ENABLE_UARTD
/* UARTD: keyboard satellite board UART, default */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
-#ifdef CONFIG_TEGRA2_ENABLE_UARTA
+#ifdef CONFIG_TEGRA20_ENABLE_UARTA
/* UARTA: debug board UART */
#define CONFIG_SYS_NS16550_COM2 NV_PA_APB_UARTA_BASE
#endif
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
#ifndef __CONFIG_H
#define __CONFIG_H
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for Medcom. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-medcom
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-medcom
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (Medcom) # "
-#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Medcom"
+#define V_PROMPT "Tegra20 (Medcom) # "
+#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Medcom"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */
+#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_BOARD_EARLY_INIT_F
"ext2load mmc 0 0x17000000 /boot/uImage;" \
"bootm"
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
#define __CONFIG_H
#include <asm/sizes.h>
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for Paz00. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-paz00
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-paz00
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (Paz00) MOD # "
-#define CONFIG_TEGRA2_BOARD_STRING "Compal Paz00"
+#define V_PROMPT "Tegra20 (Paz00) MOD # "
+#define CONFIG_TEGRA20_BOARD_STRING "Compal Paz00"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTA
+#define CONFIG_TEGRA20_ENABLE_UARTA
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_PAZ00
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
#ifndef __CONFIG_H
#define __CONFIG_H
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-plutux
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-plutux
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (Plutux) # "
-#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Plutux"
+#define V_PROMPT "Tegra20 (Plutux) # "
+#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Plutux"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */
+#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_BOARD_EARLY_INIT_F
"ext2load mmc 0 0x17000000 /boot/uImage;" \
"bootm"
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
#include <asm/sizes.h>
/* LP0 suspend / resume */
-#define CONFIG_TEGRA2_LP0
+#define CONFIG_TEGRA20_LP0
#define CONFIG_AES
#define CONFIG_TEGRA_PMU
#define CONFIG_TPS6586X_POWER
#define CONFIG_TEGRA_CLOCK_SCALING
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-seaboard
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (SeaBoard) # "
-#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Seaboard"
+#define V_PROMPT "Tegra20 (SeaBoard) # "
+#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Seaboard"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD
+#define CONFIG_TEGRA20_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
/* On Seaboard: GPIO_PI3 = Port I = 8, bit = 3 */
#define CONFIG_CMD_DHCP
/* Enable keyboard */
-#define CONFIG_TEGRA2_KEYBOARD
+#define CONFIG_TEGRA20_KEYBOARD
#define CONFIG_KEYBOARD
-#undef TEGRA2_DEVICE_SETTINGS
-#define TEGRA2_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
+#undef TEGRA20_DEVICE_SETTINGS
+#define TEGRA20_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \
"stdout=serial\0" \
"stderr=serial\0"
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
#ifndef __CONFIG_H
#define __CONFIG_H
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-tec
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-tec
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (TEC) # "
-#define CONFIG_TEGRA2_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier"
+#define V_PROMPT "Tegra20 (TEC) # "
+#define CONFIG_TEGRA20_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier"
#define CONFIG_SYS_BOARD_ODMDATA 0x2b0d8011
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD /* UARTD: debug UART */
+#define CONFIG_TEGRA20_ENABLE_UARTD /* UARTD: debug UART */
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_BOARD_EARLY_INIT_F
+++ /dev/null
-/*
- * (C) Copyright 2010-2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __TEGRA2_COMMON_POST_H
-#define __TEGRA2_COMMON_POST_H
-
-#ifdef CONFIG_BOOTCOMMAND
-
-#define BOOTCMDS_COMMON ""
-
-#else
-
-#ifdef CONFIG_CMD_EXT2
-#define BOOT_FSTYPE_EXT2 "ext2 "
-#else
-#define BOOT_FSTYPE_EXT2 ""
-#endif
-
-#ifdef CONFIG_CMD_FAT
-#define BOOT_FSTYPE_FAT "fat"
-#else
-#define BOOT_FSTYPE_FAT ""
-#endif
-
-#ifdef CONFIG_CMD_MMC
-#define BOOTCMDS_MMC \
- "mmc_boot=" \
- "setenv devtype mmc; " \
- "if mmc dev ${devnum}; then " \
- "run scan_boot; " \
- "fi\0" \
- "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
- "bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
-#define BOOT_TARGETS_MMC "mmc1 mmc0"
-#else
-#define BOOTCMDS_MMC ""
-#define BOOT_TARGETS_MMC ""
-#endif
-
-#ifdef CONFIG_CMD_USB
-#define BOOTCMD_INIT_USB "run usb_init; "
-#define BOOTCMDS_USB \
- "usb_init=" \
- "if ${usb_need_init}; then " \
- "set usb_need_init false; " \
- "usb start 0; " \
- "fi\0" \
- \
- "usb_boot=" \
- "setenv devtype usb; " \
- BOOTCMD_INIT_USB \
- "if usb dev ${devnum}; then " \
- "run scan_boot; " \
- "fi\0" \
- \
- "bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
-#define BOOT_TARGETS_USB "usb0"
-#else
-#define BOOTCMD_INIT_USB ""
-#define BOOTCMDS_USB ""
-#define BOOT_TARGETS_USB ""
-#endif
-
-#ifdef CONFIG_CMD_DHCP
-#define BOOTCMDS_DHCP \
- "bootcmd_dhcp=" \
- BOOTCMD_INIT_USB \
- "if dhcp ${scriptaddr} boot.scr.uimg; then "\
- "source ${scriptaddr}; " \
- "fi\0"
-#define BOOT_TARGETS_DHCP "dhcp"
-#else
-#define BOOTCMDS_DHCP ""
-#define BOOT_TARGETS_DHCP ""
-#endif
-
-#define BOOTCMDS_COMMON \
- "scriptaddr=0x400000\0" \
- \
- "rootpart=1\0" \
- \
- "script_boot=" \
- "if ${fs}load ${devtype} ${devnum}:${rootpart} " \
- "${scriptaddr} ${prefix}${script}; then " \
- "echo ${script} found! Executing ...;" \
- "source ${scriptaddr};" \
- "fi;\0" \
- \
- "scan_boot=" \
- "echo Scanning ${devtype} ${devnum}...; " \
- "for fs in ${boot_fstypes}; do " \
- "for prefix in ${boot_prefixes}; do " \
- "for script in ${boot_scripts}; do " \
- "run script_boot; " \
- "done; " \
- "done; " \
- "done;\0" \
- \
- "boot_targets=" \
- BOOT_TARGETS_MMC " " \
- BOOT_TARGETS_USB " " \
- BOOT_TARGETS_DHCP " " \
- "\0" \
- \
- "boot_fstypes=" \
- BOOT_FSTYPE_EXT2 " " \
- BOOT_FSTYPE_FAT " " \
- "\0" \
- \
- "boot_prefixes=/ /boot/\0" \
- \
- "boot_scripts=boot.scr.uimg boot.scr\0" \
- \
- BOOTCMDS_MMC \
- BOOTCMDS_USB \
- BOOTCMDS_DHCP
-
-#define CONFIG_BOOTCOMMAND \
- "for target in ${boot_targets}; do run bootcmd_${target}; done"
-
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- TEGRA2_DEVICE_SETTINGS \
- "fdt_load=0x01000000\0" \
- "fdt_high=01100000\0" \
- BOOTCMDS_COMMON
-
-#endif /* __TEGRA2_COMMON_POST_H */
+++ /dev/null
-/*
- * (C) Copyright 2010-2012
- * NVIDIA Corporation <www.nvidia.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __TEGRA2_COMMON_H
-#define __TEGRA2_COMMON_H
-#include <asm/sizes.h>
-
-/*
- * QUOTE(m) will evaluate to a string version of the value of the macro m
- * passed in. The extra level of indirection here is to first evaluate the
- * macro m before applying the quoting operator.
- */
-#define QUOTE_(m) #m
-#define QUOTE(m) QUOTE_(m)
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
-#define CONFIG_TEGRA2 /* in a NVidia Tegra2 core */
-#define CONFIG_MACH_TEGRA_GENERIC /* which is a Tegra generic machine */
-#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
-
-#define CONFIG_SYS_CACHELINE_SIZE 32
-
-#define CONFIG_ARCH_CPU_INIT /* Fire up the A9 core */
-
-#include <asm/arch/tegra2.h> /* get chip and board defs */
-
-/*
- * Display CPU and Board information
- */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
-#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
-
-#ifdef CONFIG_TEGRA2_LP0
-#define TEGRA_LP0_ADDR 0x1C406000
-#define TEGRA_LP0_SIZE 0x2000
-#define TEGRA_LP0_VEC \
- "lp0_vec=" QUOTE(TEGRA_LP0_SIZE) "@" QUOTE(TEGRA_LP0_ADDR) " "
-#else
-#define TEGRA_LP0_VEC
-#endif
-
-/* Environment */
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
-
-/*
- * PllX Configuration
- */
-#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CONS_INDEX 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
- 115200}
-
-/*
- * This parameter affects a TXFILLTUNING field that controls how much data is
- * sent to the latency fifo before it is sent to the wire. Without this
- * parameter, the default (2) causes occasional Data Buffer Errors in OUT
- * packets depending on the buffer address and size.
- */
-#define CONFIG_USB_EHCI_TXFIFO_THRESH 10
-#define CONFIG_EHCI_IS_TDI
-#define CONFIG_EHCI_DCACHE
-
-/* Total I2C ports on Tegra2 */
-#define TEGRA_I2C_NUM_CONTROLLERS 4
-
-/* include default commands */
-#include <config_cmd_default.h>
-
-/* remove unused commands */
-#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
-#undef CONFIG_CMD_FPGA /* FPGA configuration support */
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_NFS /* NFS support */
-#undef CONFIG_CMD_NET /* network support */
-
-/* turn on command-line edit/hist/auto */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_COMMAND_HISTORY
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_NO_FLASH
-
-/* Environment information, boards can override if required */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define TEGRA2_DEVICE_SETTINGS "stdin=serial\0" \
- "stdout=serial\0" \
- "stderr=serial\0"
-
-#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */
-#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT V_PROMPT
-/*
- * Increasing the size of the IO buffer as default nfsargs size is more
- * than 256 and so it is not possible to edit it
- */
-#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-
-#define CONFIG_SYS_MEMTEST_START (TEGRA2_SDRC_CS0 + 0x600000)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
-
-#define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */
-#define CONFIG_SYS_HZ 1000
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKBASE 0x2800000 /* 40MB */
-#define CONFIG_STACKSIZE 0x20000 /* 128K regular stack*/
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 TEGRA2_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
-
-#define CONFIG_SYS_TEXT_BASE 0x00108000
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
-#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_TEGRA_GPIO
-#define CONFIG_CMD_GPIO
-#define CONFIG_CMD_ENTERRCM
-#define CONFIG_CMD_BOOTZ
-#endif /* __TEGRA2_COMMON_H */
--- /dev/null
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __TEGRA20_COMMON_POST_H
+#define __TEGRA20_COMMON_POST_H
+
+#ifdef CONFIG_BOOTCOMMAND
+
+#define BOOTCMDS_COMMON ""
+
+#else
+
+#ifdef CONFIG_CMD_EXT2
+#define BOOT_FSTYPE_EXT2 "ext2 "
+#else
+#define BOOT_FSTYPE_EXT2 ""
+#endif
+
+#ifdef CONFIG_CMD_FAT
+#define BOOT_FSTYPE_FAT "fat"
+#else
+#define BOOT_FSTYPE_FAT ""
+#endif
+
+#ifdef CONFIG_CMD_MMC
+#define BOOTCMDS_MMC \
+ "mmc_boot=" \
+ "setenv devtype mmc; " \
+ "if mmc dev ${devnum}; then " \
+ "run scan_boot; " \
+ "fi\0" \
+ "bootcmd_mmc0=setenv devnum 0; run mmc_boot;\0" \
+ "bootcmd_mmc1=setenv devnum 1; run mmc_boot;\0"
+#define BOOT_TARGETS_MMC "mmc1 mmc0"
+#else
+#define BOOTCMDS_MMC ""
+#define BOOT_TARGETS_MMC ""
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOTCMD_INIT_USB "run usb_init; "
+#define BOOTCMDS_USB \
+ "usb_init=" \
+ "if ${usb_need_init}; then " \
+ "set usb_need_init false; " \
+ "usb start 0; " \
+ "fi\0" \
+ \
+ "usb_boot=" \
+ "setenv devtype usb; " \
+ BOOTCMD_INIT_USB \
+ "if usb dev ${devnum}; then " \
+ "run scan_boot; " \
+ "fi\0" \
+ \
+ "bootcmd_usb0=setenv devnum 0; run usb_boot;\0"
+#define BOOT_TARGETS_USB "usb0"
+#else
+#define BOOTCMD_INIT_USB ""
+#define BOOTCMDS_USB ""
+#define BOOT_TARGETS_USB ""
+#endif
+
+#ifdef CONFIG_CMD_DHCP
+#define BOOTCMDS_DHCP \
+ "bootcmd_dhcp=" \
+ BOOTCMD_INIT_USB \
+ "if dhcp ${scriptaddr} boot.scr.uimg; then "\
+ "source ${scriptaddr}; " \
+ "fi\0"
+#define BOOT_TARGETS_DHCP "dhcp"
+#else
+#define BOOTCMDS_DHCP ""
+#define BOOT_TARGETS_DHCP ""
+#endif
+
+#define BOOTCMDS_COMMON \
+ "scriptaddr=0x400000\0" \
+ \
+ "rootpart=1\0" \
+ \
+ "script_boot=" \
+ "if ${fs}load ${devtype} ${devnum}:${rootpart} " \
+ "${scriptaddr} ${prefix}${script}; then " \
+ "echo ${script} found! Executing ...;" \
+ "source ${scriptaddr};" \
+ "fi;\0" \
+ \
+ "scan_boot=" \
+ "echo Scanning ${devtype} ${devnum}...; " \
+ "for fs in ${boot_fstypes}; do " \
+ "for prefix in ${boot_prefixes}; do " \
+ "for script in ${boot_scripts}; do " \
+ "run script_boot; " \
+ "done; " \
+ "done; " \
+ "done;\0" \
+ \
+ "boot_targets=" \
+ BOOT_TARGETS_MMC " " \
+ BOOT_TARGETS_USB " " \
+ BOOT_TARGETS_DHCP " " \
+ "\0" \
+ \
+ "boot_fstypes=" \
+ BOOT_FSTYPE_EXT2 " " \
+ BOOT_FSTYPE_FAT " " \
+ "\0" \
+ \
+ "boot_prefixes=/ /boot/\0" \
+ \
+ "boot_scripts=boot.scr.uimg boot.scr\0" \
+ \
+ BOOTCMDS_MMC \
+ BOOTCMDS_USB \
+ BOOTCMDS_DHCP
+
+#define CONFIG_BOOTCOMMAND \
+ "for target in ${boot_targets}; do run bootcmd_${target}; done"
+
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ TEGRA20_DEVICE_SETTINGS \
+ "fdt_load=0x01000000\0" \
+ "fdt_high=01100000\0" \
+ BOOTCMDS_COMMON
+
+#endif /* __TEGRA20_COMMON_POST_H */
--- /dev/null
+/*
+ * (C) Copyright 2010-2012
+ * NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __TEGRA20_COMMON_H
+#define __TEGRA20_COMMON_H
+#include <asm/sizes.h>
+
+/*
+ * QUOTE(m) will evaluate to a string version of the value of the macro m
+ * passed in. The extra level of indirection here is to first evaluate the
+ * macro m before applying the quoting operator.
+ */
+#define QUOTE_(m) #m
+#define QUOTE(m) QUOTE_(m)
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMCORTEXA9 /* This is an ARM V7 CPU core */
+#define CONFIG_TEGRA20 /* in a NVidia Tegra20 core */
+#define CONFIG_MACH_TEGRA_GENERIC /* which is a Tegra generic machine */
+#define CONFIG_SYS_L2CACHE_OFF /* No L2 cache */
+
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+#define CONFIG_ARCH_CPU_INIT /* Fire up the A9 core */
+
+#include <asm/arch/tegra20.h> /* get chip and board defs */
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
+
+#ifdef CONFIG_TEGRA20_LP0
+#define TEGRA_LP0_ADDR 0x1C406000
+#define TEGRA_LP0_SIZE 0x2000
+#define TEGRA_LP0_VEC \
+ "lp0_vec=" QUOTE(TEGRA_LP0_SIZE) "@" QUOTE(TEGRA_LP0_ADDR) " "
+#else
+#define TEGRA_LP0_VEC
+#endif
+
+/* Environment */
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_SIZE 0x2000 /* Total Size Environment */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
+
+/*
+ * PllX Configuration
+ */
+#define CONFIG_SYS_CPU_OSC_FREQUENCY 1000000 /* Set CPU clock to 1GHz */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK 216000000 /* 216MHz (pllp_out0) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+
+/*
+ * This parameter affects a TXFILLTUNING field that controls how much data is
+ * sent to the latency fifo before it is sent to the wire. Without this
+ * parameter, the default (2) causes occasional Data Buffer Errors in OUT
+ * packets depending on the buffer address and size.
+ */
+#define CONFIG_USB_EHCI_TXFIFO_THRESH 10
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_EHCI_DCACHE
+
+/* Total I2C ports on Tegra20 */
+#define TEGRA_I2C_NUM_CONTROLLERS 4
+
+/* include default commands */
+#include <config_cmd_default.h>
+
+/* remove unused commands */
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration support */
+#undef CONFIG_CMD_IMI
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_NFS /* NFS support */
+#undef CONFIG_CMD_NET /* network support */
+
+/* turn on command-line edit/hist/auto */
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_COMMAND_HISTORY
+#define CONFIG_AUTO_COMPLETE
+
+#define CONFIG_SYS_NO_FLASH
+
+/* Environment information, boards can override if required */
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define TEGRA20_DEVICE_SETTINGS "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+
+#define CONFIG_LOADADDR 0x408000 /* def. location for kernel */
+#define CONFIG_BOOTDELAY 2 /* -1 to disable auto boot */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT V_PROMPT
+/*
+ * Increasing the size of the IO buffer as default nfsargs size is more
+ * than 256 and so it is not possible to edit it
+ */
+#define CONFIG_SYS_CBSIZE (256 * 2) /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START (TEGRA20_SDRC_CS0 + 0x600000)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
+
+#define CONFIG_SYS_LOAD_ADDR (0xA00800) /* default */
+#define CONFIG_SYS_HZ 1000
+
+/*-----------------------------------------------------------------------
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKBASE 0x2800000 /* 40MB */
+#define CONFIG_STACKSIZE 0x20000 /* 128K regular stack*/
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 TEGRA20_SDRC_CS0
+#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512M */
+
+#define CONFIG_SYS_TEXT_BASE 0x00108000
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_STACKBASE
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_TEGRA_GPIO
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_ENTERRCM
+#define CONFIG_CMD_BOOTZ
+#endif /* __TEGRA20_COMMON_H */
#define __CONFIG_H
#include <asm/sizes.h>
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-trimslice
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-trimslice
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (TrimSlice) # "
-#define CONFIG_TEGRA2_BOARD_STRING "Compulab Trimslice"
+#define V_PROMPT "Tegra20 (TrimSlice) # "
+#define CONFIG_TEGRA20_BOARD_STRING "Compulab Trimslice"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTA
-#define CONFIG_TEGRA2_UARTA_GPU
+#define CONFIG_TEGRA20_ENABLE_UARTA
+#define CONFIG_TEGRA20_UARTA_GPU
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
#define __CONFIG_H
#include <asm/sizes.h>
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-ventana
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-ventana
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (Ventana) # "
-#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Ventana"
+#define V_PROMPT "Tegra20 (Ventana) # "
+#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Ventana"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTD
+#define CONFIG_TEGRA20_ENABLE_UARTD
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_VENTANA
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
#define __CONFIG_H
#include <asm/sizes.h>
-#include "tegra2-common.h"
+#include "tegra20-common.h"
/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */
-#define CONFIG_DEFAULT_DEVICE_TREE tegra2-whistler
+#define CONFIG_DEFAULT_DEVICE_TREE tegra20-whistler
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
/* High-level configuration options */
-#define V_PROMPT "Tegra2 (Whistler) # "
-#define CONFIG_TEGRA2_BOARD_STRING "NVIDIA Whistler"
+#define V_PROMPT "Tegra20 (Whistler) # "
+#define CONFIG_TEGRA20_BOARD_STRING "NVIDIA Whistler"
/* Board-specific serial config */
#define CONFIG_SERIAL_MULTI
-#define CONFIG_TEGRA2_ENABLE_UARTA
-#define CONFIG_TEGRA2_UARTA_UAA_UAB
+#define CONFIG_TEGRA20_ENABLE_UARTA
+#define CONFIG_TEGRA20_UARTA_UAA_UAB
#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE
#define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
-#include "tegra2-common-post.h"
+#include "tegra20-common-post.h"
#endif /* __CONFIG_H */
*/
enum fdt_compat_id {
COMPAT_UNKNOWN,
- COMPAT_NVIDIA_TEGRA20_USB, /* Tegra2 USB port */
- COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra2 i2c */
- COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra2 dvc (really just i2c) */
- COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra2 memory controller */
- COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra2 memory timing table */
- COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra2 Keyboard */
+ COMPAT_NVIDIA_TEGRA20_USB, /* Tegra20 USB port */
+ COMPAT_NVIDIA_TEGRA20_I2C, /* Tegra20 i2c */
+ COMPAT_NVIDIA_TEGRA20_DVC, /* Tegra20 dvc (really just i2c) */
+ COMPAT_NVIDIA_TEGRA20_EMC, /* Tegra20 memory controller */
+ COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */
+ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */
COMPAT_COUNT,
};
defined(CONFIG_MB86R0x) || defined(CONFIG_MPC5xxx) || \
defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \
defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \
- defined(CONFIG_TEGRA2) || defined(CONFIG_SYS_COREBOOT)
+ defined(CONFIG_TEGRA20) || defined(CONFIG_SYS_COREBOOT)
extern struct serial_device serial0_device;
extern struct serial_device serial1_device;
#if defined(CONFIG_SYS_NS16550_SERIAL)
projects / oweals / u-boot.git / commitdiff