---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -144,6 +144,19 @@ config BCM63XX
- help
- Support for BCM63XX based boards
-
-+config ATHEROS_AR231X
-+ bool "Atheros 231x/531x SoC support"
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select DMA_NONCOHERENT
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_BIG_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select ARCH_REQUIRE_GPIOLIB
-+ help
-+ Support for AR231x and AR531x based boards
-+
- config MIPS_COBALT
- bool "Cobalt Server"
- select CEVT_R4K
-@@ -795,6 +808,7 @@ config NLM_XLP_BOARD
-
- endchoice
-
-+source "arch/mips/ar231x/Kconfig"
- source "arch/mips/alchemy/Kconfig"
- source "arch/mips/ath79/Kconfig"
- source "arch/mips/bcm47xx/Kconfig"
---- a/arch/mips/Kbuild.platforms
-+++ b/arch/mips/Kbuild.platforms
-@@ -6,6 +6,7 @@ platforms += ath79
- platforms += bcm47xx
- platforms += bcm63xx
- platforms += cavium-octeon
-+platforms += ar231x
- platforms += cobalt
- platforms += dec
- platforms += emma
---- /dev/null
-+++ b/arch/mips/ar231x/Platform
-@@ -0,0 +1,6 @@
-+#
-+# Atheros AR531X/AR231X WiSoC
-+#
-+platform-$(CONFIG_ATHEROS_AR231X) += ar231x/
-+cflags-$(CONFIG_ATHEROS_AR231X) += -I$(srctree)/arch/mips/include/asm/mach-ar231x
-+load-$(CONFIG_ATHEROS_AR231X) += 0xffffffff80041000
---- /dev/null
-+++ b/arch/mips/ar231x/Kconfig
-@@ -0,0 +1,9 @@
-+config SOC_AR5312
-+ bool "Atheros 5312/2312+ support"
-+ depends on ATHEROS_AR231X
-+ default y
-+
-+config SOC_AR2315
-+ bool "Atheros 2315+ support"
-+ depends on ATHEROS_AR231X
-+ default y
---- /dev/null
-+++ b/arch/mips/ar231x/Makefile
-@@ -0,0 +1,13 @@
-+#
-+# This file is subject to the terms and conditions of the GNU General Public
-+# License. See the file "COPYING" in the main directory of this archive
-+# for more details.
-+#
-+# Copyright (C) 2006 FON Technology, SL.
-+# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+#
-+
-+obj-y += board.o prom.o devices.o
-+obj-$(CONFIG_SOC_AR5312) += ar5312.o
-+obj-$(CONFIG_SOC_AR2315) += ar2315.o
---- /dev/null
-+++ b/arch/mips/ar231x/board.c
-@@ -0,0 +1,229 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/random.h>
-+#include <linux/etherdevice.h>
-+#include <linux/irq.h>
-+#include <linux/io.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/reboot.h>
-+#include <asm/bootinfo.h>
-+#include <asm/time.h>
-+
-+#include <ar231x_platform.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void (*ar231x_irq_dispatch)(void);
-+
-+static inline bool check_radio_magic(u8 *addr)
-+{
-+ addr += 0x7a; /* offset for flash magic */
-+ return (addr[0] == 0x5a) && (addr[1] == 0xa5);
-+}
-+
-+static inline bool check_notempty(u8 *addr)
-+{
-+ return *(u32 *)addr != 0xffffffff;
-+}
-+
-+static inline bool check_board_data(u8 *flash_limit, u8 *addr, bool broken)
-+{
-+ /* config magic found */
-+ if (*((u32 *)addr) == AR231X_BD_MAGIC)
-+ return true;
-+
-+ if (!broken)
-+ return false;
-+
-+ if (check_radio_magic(addr + 0xf8))
-+ ar231x_board.radio = addr + 0xf8;
-+ if ((addr < flash_limit + 0x10000) &&
-+ check_radio_magic(addr + 0x10000))
-+ ar231x_board.radio = addr + 0x10000;
-+
-+ if (ar231x_board.radio) {
-+ /* broken board data detected, use radio data to find the
-+ * offset, user will fix this */
-+ return true;
-+ }
-+
-+ return false;
-+}
-+
-+static u8 * __init find_board_config(u8 *flash_limit, bool broken)
-+{
-+ u8 *addr;
-+ u8 *begin = flash_limit - 0x1000;
-+ u8 *end = flash_limit - 0x30000;
-+
-+ for (addr = begin; addr >= end; addr -= 0x1000)
-+ if (check_board_data(flash_limit, addr, broken))
-+ return addr;
-+
-+ return NULL;
-+}
-+
-+static u8 * __init find_radio_config(u8 *flash_limit, u8 *bcfg)
-+{
-+ u8 *rcfg, *begin, *end;
-+
-+ /*
-+ * Now find the start of Radio Configuration data, using heuristics:
-+ * Search forward from Board Configuration data by 0x1000 bytes
-+ * at a time until we find non-0xffffffff.
-+ */
-+ begin = bcfg + 0x1000;
-+ end = flash_limit;
-+ for (rcfg = begin; rcfg < end; rcfg += 0x1000)
-+ if (check_notempty(rcfg) && check_radio_magic(rcfg))
-+ return rcfg;
-+
-+ /* AR2316 relocates radio config to new location */
-+ begin = bcfg + 0xf8;
-+ end = flash_limit - 0x1000 + 0xf8;
-+ for (rcfg = begin; rcfg < end; rcfg += 0x1000)
-+ if (check_notempty(rcfg) && check_radio_magic(rcfg))
-+ return rcfg;
-+
-+ pr_warn("WARNING: Could not find Radio Configuration data\n");
-+
-+ return NULL;
-+}
-+
-+int __init ar231x_find_config(u8 *flash_limit)
-+{
-+ struct ar231x_boarddata *config;
-+ unsigned int rcfg_size;
-+ int broken_boarddata = 0;
-+ u8 *bcfg, *rcfg;
-+ u8 *board_data;
-+ u8 *radio_data;
-+ u8 *mac_addr;
-+ u32 offset;
-+
-+ ar231x_board.config = NULL;
-+ ar231x_board.radio = NULL;
-+ /* Copy the board and radio data to RAM, because accessing the mapped
-+ * memory of the flash directly after booting is not safe */
-+
-+ /* Try to find valid board and radio data */
-+ bcfg = find_board_config(flash_limit, false);
-+
-+ /* If that fails, try to at least find valid radio data */
-+ if (!bcfg) {
-+ bcfg = find_board_config(flash_limit, true);
-+ broken_boarddata = 1;
-+ }
-+
-+ if (!bcfg) {
-+ pr_warn("WARNING: No board configuration data found!\n");
-+ return -ENODEV;
-+ }
-+
-+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
-+ ar231x_board.config = (struct ar231x_boarddata *)board_data;
-+ memcpy(board_data, bcfg, 0x100);
-+ if (broken_boarddata) {
-+ pr_warn("WARNING: broken board data detected\n");
-+ config = ar231x_board.config;
-+ if (is_zero_ether_addr(config->enet0_mac)) {
-+ pr_info("Fixing up empty mac addresses\n");
-+ config->reset_config_gpio = 0xffff;
-+ config->sys_led_gpio = 0xffff;
-+ random_ether_addr(config->wlan0_mac);
-+ config->wlan0_mac[0] &= ~0x06;
-+ random_ether_addr(config->enet0_mac);
-+ random_ether_addr(config->enet1_mac);
-+ }
-+ }
-+
-+ /* Radio config starts 0x100 bytes after board config, regardless
-+ * of what the physical layout on the flash chip looks like */
-+
-+ if (ar231x_board.radio)
-+ rcfg = (u8 *)ar231x_board.radio;
-+ else
-+ rcfg = find_radio_config(flash_limit, bcfg);
-+
-+ if (!rcfg)
-+ return -ENODEV;
-+
-+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
-+ ar231x_board.radio = radio_data;
-+ offset = radio_data - board_data;
-+ pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg,
-+ offset);
-+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
-+ memcpy(radio_data, rcfg, rcfg_size);
-+
-+ mac_addr = &radio_data[0x1d * 2];
-+ if (is_broadcast_ether_addr(mac_addr)) {
-+ pr_info("Radio MAC is blank; using board-data\n");
-+ ether_addr_copy(mac_addr, ar231x_board.config->wlan0_mac);
-+ }
-+
-+ return 0;
-+}
-+
-+static void ar231x_halt(void)
-+{
-+ local_irq_disable();
-+ while (1)
-+ ;
-+}
-+
-+void __init plat_mem_setup(void)
-+{
-+ _machine_halt = ar231x_halt;
-+ pm_power_off = ar231x_halt;
-+
-+ ar5312_plat_setup();
-+ ar2315_plat_setup();
-+
-+ /* Disable data watchpoints */
-+ write_c0_watchlo0(0);
-+}
-+
-+asmlinkage void plat_irq_dispatch(void)
-+{
-+ ar231x_irq_dispatch();
-+}
-+
-+void __init plat_time_init(void)
-+{
-+ ar5312_time_init();
-+ ar2315_time_init();
-+}
-+
-+unsigned int __cpuinit get_c0_compare_int(void)
-+{
-+ return CP0_LEGACY_COMPARE_IRQ;
-+}
-+
-+void __init arch_init_irq(void)
-+{
-+ clear_c0_status(ST0_IM);
-+ mips_cpu_irq_init();
-+
-+ /* Initialize interrupt controllers */
-+ ar5312_irq_init();
-+ ar2315_irq_init();
-+}
-+
---- /dev/null
-+++ b/arch/mips/ar231x/prom.c
-@@ -0,0 +1,37 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright MontaVista Software Inc
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+/*
-+ * Prom setup file for ar231x
-+ */
-+
-+#include <linux/init.h>
-+#include <generated/autoconf.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/mm.h>
-+#include <linux/bootmem.h>
-+
-+#include <asm/bootinfo.h>
-+#include <asm/addrspace.h>
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+void __init prom_init(void)
-+{
-+ ar5312_prom_init();
-+ ar2315_prom_init();
-+}
-+
-+void __init prom_free_prom_memory(void)
-+{
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h
-@@ -0,0 +1,85 @@
-+#ifndef __ASM_MACH_AR231X_PLATFORM_H
-+#define __ASM_MACH_AR231X_PLATFORM_H
-+
-+#include <linux/etherdevice.h>
-+
-+/*
-+ * This is board-specific data that is stored in a "fixed" location in flash.
-+ * It is shared across operating systems, so it should not be changed lightly.
-+ * The main reason we need it is in order to extract the ethernet MAC
-+ * address(es).
-+ */
-+struct ar231x_boarddata {
-+ u32 magic; /* board data is valid */
-+#define AR231X_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */
-+ u16 cksum; /* checksum (starting with BD_REV 2) */
-+ u16 rev; /* revision of this struct */
-+#define BD_REV 4
-+ char board_name[64]; /* Name of board */
-+ u16 major; /* Board major number */
-+ u16 minor; /* Board minor number */
-+ u32 flags; /* Board configuration */
-+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
-+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
-+#define BD_UART1 0x00000004 /* UART1 is stuffed */
-+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
-+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
-+#define BD_SYSLED 0x00000020 /* System LED stuffed */
-+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
-+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
-+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
-+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
-+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */
-+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
-+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
-+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
-+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
-+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
-+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
-+ u16 reset_config_gpio; /* Reset factory GPIO pin */
-+ u16 sys_led_gpio; /* System LED GPIO pin */
-+
-+ u32 cpu_freq; /* CPU core frequency in Hz */
-+ u32 sys_freq; /* System frequency in Hz */
-+ u32 cnt_freq; /* Calculated C0_COUNT frequency */
-+
-+ u8 wlan0_mac[ETH_ALEN];
-+ u8 enet0_mac[ETH_ALEN];
-+ u8 enet1_mac[ETH_ALEN];
-+
-+ u16 pci_id; /* Pseudo PCIID for common code */
-+ u16 mem_cap; /* cap bank1 in MB */
-+
-+ /* version 3 */
-+ u8 wlan1_mac[ETH_ALEN]; /* (ar5212) */
-+};
-+
-+#define BOARD_CONFIG_BUFSZ 0x1000
-+
-+/*
-+ * Platform device information for the Wireless MAC
-+ */
-+struct ar231x_board_config {
-+ u16 devid;
-+
-+ /* board config data */
-+ struct ar231x_boarddata *config;
-+
-+ /* radio calibration data */
-+ const char *radio;
-+};
-+
-+/*
-+ * Platform device information for the Ethernet MAC
-+ */
-+struct ar231x_eth {
-+ void (*reset_set)(u32);
-+ void (*reset_clear)(u32);
-+ u32 reset_mac;
-+ u32 reset_phy;
-+ struct ar231x_board_config *config;
-+ char *macaddr;
-+};
-+
-+#endif /* __ASM_MACH_AR231X_PLATFORM_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h
-@@ -0,0 +1,84 @@
-+/*
-+ * Atheros AR231x/AR531x SoC specific CPU feature overrides
-+ *
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This file was derived from: include/asm-mips/cpu-features.h
-+ * Copyright (C) 2003, 2004 Ralf Baechle
-+ * Copyright (C) 2004 Maciej W. Rozycki
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+#ifndef __ASM_MACH_AR231X_CPU_FEATURE_OVERRIDES_H
-+#define __ASM_MACH_AR231X_CPU_FEATURE_OVERRIDES_H
-+
-+/*
-+ * The Atheros AR531x/AR231x SoCs have MIPS 4Kc/4KEc core.
-+ */
-+#define cpu_has_tlb 1
-+#define cpu_has_4kex 1
-+#define cpu_has_3k_cache 0
-+#define cpu_has_4k_cache 1
-+#define cpu_has_tx39_cache 0
-+#define cpu_has_sb1_cache 0
-+#define cpu_has_fpu 0
-+#define cpu_has_32fpr 0
-+#define cpu_has_counter 1
-+/* #define cpu_has_watch ? */
-+/* #define cpu_has_divec ? */
-+/* #define cpu_has_vce ? */
-+/* #define cpu_has_cache_cdex_p ? */
-+/* #define cpu_has_cache_cdex_s ? */
-+/* #define cpu_has_prefetch ? */
-+/* #define cpu_has_mcheck ? */
-+#define cpu_has_ejtag 1
-+
-+#if !defined(CONFIG_SOC_AR5312)
-+# define cpu_has_llsc 1
-+#else
-+/*
-+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
-+ * ll/sc instructions.
-+ */
-+# define cpu_has_llsc 0
-+#endif
-+
-+#define cpu_has_mips16 0
-+#define cpu_has_mdmx 0
-+#define cpu_has_mips3d 0
-+#define cpu_has_smartmips 0
-+
-+/* #define cpu_has_vtag_icache ? */
-+/* #define cpu_has_dc_aliases ? */
-+/* #define cpu_has_ic_fills_f_dc ? */
-+/* #define cpu_has_pindexed_dcache ? */
-+
-+/* #define cpu_icache_snoops_remote_store ? */
-+
-+#define cpu_has_mips32r1 1
-+
-+#if !defined(CONFIG_SOC_AR5312)
-+# define cpu_has_mips32r2 1
-+#endif
-+
-+#define cpu_has_mips64r1 0
-+#define cpu_has_mips64r2 0
-+
-+#define cpu_has_dsp 0
-+#define cpu_has_mipsmt 0
-+
-+/* #define cpu_has_nofpuex ? */
-+#define cpu_has_64bits 0
-+#define cpu_has_64bit_zero_reg 0
-+#define cpu_has_64bit_gp_regs 0
-+#define cpu_has_64bit_addresses 0
-+
-+/* #define cpu_has_inclusive_pcaches ? */
-+
-+/* #define cpu_dcache_line_size() ? */
-+/* #define cpu_icache_line_size() ? */
-+
-+#endif /* __ASM_MACH_AR231X_CPU_FEATURE_OVERRIDES_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h
-@@ -0,0 +1,76 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
-+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
-+ *
-+ */
-+#ifndef __ASM_MACH_AR231X_DMA_COHERENCE_H
-+#define __ASM_MACH_AR231X_DMA_COHERENCE_H
-+
-+#include <linux/device.h>
-+#include <ar2315_regs.h>
-+
-+static inline dma_addr_t ar231x_dev_offset(struct device *dev)
-+{
-+#ifdef CONFIG_PCI
-+ extern struct bus_type pci_bus_type;
-+
-+ if (dev && dev->bus == &pci_bus_type)
-+ return AR2315_PCI_HOST_SDRAM_BASEADDR;
-+#endif
-+ return 0;
-+}
-+
-+static inline dma_addr_t
-+plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-+{
-+ return virt_to_phys(addr) + ar231x_dev_offset(dev);
-+}
-+
-+static inline dma_addr_t
-+plat_map_dma_mem_page(struct device *dev, struct page *page)
-+{
-+ return page_to_phys(page) + ar231x_dev_offset(dev);
-+}
-+
-+static inline unsigned long
-+plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
-+{
-+ return dma_addr - ar231x_dev_offset(dev);
-+}
-+
-+static inline void
-+plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size,
-+ enum dma_data_direction direction)
-+{
-+}
-+
-+static inline int plat_dma_supported(struct device *dev, u64 mask)
-+{
-+ return 1;
-+}
-+
-+static inline void plat_extra_sync_for_device(struct device *dev)
-+{
-+}
-+
-+static inline int plat_dma_mapping_error(struct device *dev,
-+ dma_addr_t dma_addr)
-+{
-+ return 0;
-+}
-+
-+static inline int plat_device_is_coherent(struct device *dev)
-+{
-+#ifdef CONFIG_DMA_COHERENT
-+ return 1;
-+#endif
-+#ifdef CONFIG_DMA_NONCOHERENT
-+ return 0;
-+#endif
-+}
-+
-+#endif /* __ASM_MACH_AR231X_DMA_COHERENCE_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/gpio.h
-@@ -0,0 +1,16 @@
-+#ifndef __ASM_MACH_AR231X_GPIO_H
-+#define __ASM_MACH_AR231X_GPIO_H
-+
-+#include <asm-generic/gpio.h>
-+
-+#define gpio_get_value __gpio_get_value
-+#define gpio_set_value __gpio_set_value
-+#define gpio_cansleep __gpio_cansleep
-+#define gpio_to_irq __gpio_to_irq
-+
-+static inline int irq_to_gpio(unsigned irq)
-+{
-+ return -EINVAL;
-+}
-+
-+#endif /* __ASM_MACH_AR231X_GPIO_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/reset.h
-@@ -0,0 +1,6 @@
-+#ifndef __ASM_MACH_AR231X_RESET_H
-+#define __ASM_MACH_AR231X_RESET_H
-+
-+void ar231x_disable_reset_button(void);
-+
-+#endif /* __ASM_MACH_AR231X_RESET_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/war.h
-@@ -0,0 +1,25 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+#ifndef __ASM_MACH_AR231X_WAR_H
-+#define __ASM_MACH_AR231X_WAR_H
-+
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
-+#define R4600_V1_HIT_CACHEOP_WAR 0
-+#define R4600_V2_HIT_CACHEOP_WAR 0
-+#define R5432_CP0_INTERRUPT_WAR 0
-+#define BCM1250_M3_WAR 0
-+#define SIBYTE_1956_WAR 0
-+#define MIPS4K_ICACHE_REFILL_WAR 0
-+#define MIPS_CACHE_SYNC_WAR 0
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
-+#define RM9000_CDEX_SMP_WAR 0
-+#define ICACHE_REFILLS_WORKAROUND_WAR 0
-+#define R10000_LLSC_WAR 0
-+#define MIPS34K_MISSED_ITLB_WAR 0
-+
-+#endif /* __ASM_MACH_AR231X_WAR_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h
-@@ -0,0 +1,608 @@
-+/*
-+ * Register definitions for AR2315+
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef __ASM_MACH_AR231X_AR2315_REGS_H
-+#define __ASM_MACH_AR231X_AR2315_REGS_H
-+
-+/*
-+ * IRQs
-+ */
-+#define AR2315_IRQ_MISC_INTRS (MIPS_CPU_IRQ_BASE+2) /* C0_CAUSE: 0x0400 */
-+#define AR2315_IRQ_WLAN0_INTRS (MIPS_CPU_IRQ_BASE+3) /* C0_CAUSE: 0x0800 */
-+#define AR2315_IRQ_ENET0_INTRS (MIPS_CPU_IRQ_BASE+4) /* C0_CAUSE: 0x1000 */
-+#define AR2315_IRQ_LCBUS_PCI (MIPS_CPU_IRQ_BASE+5) /* C0_CAUSE: 0x2000 */
-+#define AR2315_IRQ_WLAN0_POLL (MIPS_CPU_IRQ_BASE+6) /* C0_CAUSE: 0x4000 */
-+
-+/*
-+ * Miscellaneous interrupts, which share IP2.
-+ */
-+#define AR2315_MISC_IRQ_UART0 (AR231X_MISC_IRQ_BASE+0)
-+#define AR2315_MISC_IRQ_I2C_RSVD (AR231X_MISC_IRQ_BASE+1)
-+#define AR2315_MISC_IRQ_SPI (AR231X_MISC_IRQ_BASE+2)
-+#define AR2315_MISC_IRQ_AHB (AR231X_MISC_IRQ_BASE+3)
-+#define AR2315_MISC_IRQ_APB (AR231X_MISC_IRQ_BASE+4)
-+#define AR2315_MISC_IRQ_TIMER (AR231X_MISC_IRQ_BASE+5)
-+#define AR2315_MISC_IRQ_GPIO (AR231X_MISC_IRQ_BASE+6)
-+#define AR2315_MISC_IRQ_WATCHDOG (AR231X_MISC_IRQ_BASE+7)
-+#define AR2315_MISC_IRQ_IR_RSVD (AR231X_MISC_IRQ_BASE+8)
-+#define AR2315_MISC_IRQ_COUNT 9
-+
-+/*
-+ * PCI interrupts, which share IP5
-+ * Keep ordered according to AR2315_PCI_INT_XXX bits
-+ */
-+#define AR2315_PCI_IRQ_BASE 0x50
-+#define AR2315_PCI_IRQ_EXT (AR2315_PCI_IRQ_BASE+0)
-+#define AR2315_PCI_IRQ_ABORT (AR2315_PCI_IRQ_BASE+1)
-+#define AR2315_PCI_IRQ_COUNT 2
-+#define AR2315_PCI_IRQ_SHIFT 25 /* in AR2315_PCI_INT_STATUS */
-+
-+/*
-+ * Address map
-+ */
-+#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */
-+#define AR2315_WLAN0 0x10000000 /* Wireless MMR */
-+#define AR2315_PCI 0x10100000 /* PCI MMR */
-+#define AR2315_SDRAMCTL 0x10300000 /* SDRAM MMR */
-+#define AR2315_LOCAL 0x10400000 /* LOCAL BUS MMR */
-+#define AR2315_ENET0 0x10500000 /* ETHERNET MMR */
-+#define AR2315_DSLBASE 0x11000000 /* RESET CONTROL MMR */
-+#define AR2315_UART0 0x11100000 /* UART MMR */
-+#define AR2315_SPI_MMR 0x11300000 /* SPI FLASH MMR */
-+#define AR2315_PCIEXT 0x80000000 /* pci external */
-+#define AR2315_PCIEXT_SZ 0x40000000
-+
-+/* MII registers offset inside Ethernet MMR region */
-+#define AR2315_ENET0_MII (AR2315_ENET0 + 0x14)
-+
-+/*
-+ * Cold reset register
-+ */
-+#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000)
-+
-+#define AR2315_RESET_COLD_AHB 0x00000001
-+#define AR2315_RESET_COLD_APB 0x00000002
-+#define AR2315_RESET_COLD_CPU 0x00000004
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
-+#define AR2315_RESET_SYSTEM \
-+ (RESET_COLD_CPU |\
-+ RESET_COLD_APB |\
-+ RESET_COLD_AHB) /* full system */
-+#define AR2317_RESET_SYSTEM 0x00000010
-+
-+/*
-+ * Reset register
-+ */
-+#define AR2315_RESET (AR2315_DSLBASE + 0x0004)
-+
-+/* warm reset WLAN0 MAC */
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001
-+/* warm reset WLAN0 BaseBand */
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002
-+/* warm reset MPEG-TS */
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004
-+/* warm reset PCI ahb/dma */
-+#define AR2315_RESET_PCIDMA 0x00000008
-+/* warm reset memory controller */
-+#define AR2315_RESET_MEMCTL 0x00000010
-+/* warm reset local bus */
-+#define AR2315_RESET_LOCAL 0x00000020
-+/* warm reset I2C bus */
-+#define AR2315_RESET_I2C_RSVD 0x00000040
-+/* warm reset SPI interface */
-+#define AR2315_RESET_SPI 0x00000080
-+/* warm reset UART0 */
-+#define AR2315_RESET_UART0 0x00000100
-+/* warm reset IR interface */
-+#define AR2315_RESET_IR_RSVD 0x00000200
-+/* cold reset ENET0 phy */
-+#define AR2315_RESET_EPHY0 0x00000400
-+/* cold reset ENET0 mac */
-+#define AR2315_RESET_ENET0 0x00000800
-+
-+/*
-+ * AHB master arbitration control
-+ */
-+#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008)
-+
-+/* CPU, default */
-+#define AR2315_ARB_CPU 0x00000001
-+/* WLAN */
-+#define AR2315_ARB_WLAN 0x00000002
-+/* MPEG-TS */
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004
-+/* LOCAL */
-+#define AR2315_ARB_LOCAL 0x00000008
-+/* PCI */
-+#define AR2315_ARB_PCI 0x00000010
-+/* Ethernet */
-+#define AR2315_ARB_ETHERNET 0x00000020
-+/* retry policy, debug only */
-+#define AR2315_ARB_RETRY 0x00000100
-+
-+/*
-+ * Config Register
-+ */
-+#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c)
-+
-+/* EC - AHB bridge endianess */
-+#define AR2315_CONFIG_AHB 0x00000001
-+/* WLAN byteswap */
-+#define AR2315_CONFIG_WLAN 0x00000002
-+/* MPEG-TS byteswap */
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004
-+/* PCI byteswap */
-+#define AR2315_CONFIG_PCI 0x00000008
-+/* Memory controller endianess */
-+#define AR2315_CONFIG_MEMCTL 0x00000010
-+/* Local bus byteswap */
-+#define AR2315_CONFIG_LOCAL 0x00000020
-+/* Ethernet byteswap */
-+#define AR2315_CONFIG_ETHERNET 0x00000040
-+
-+/* CPU write buffer merge */
-+#define AR2315_CONFIG_MERGE 0x00000200
-+/* CPU big endian */
-+#define AR2315_CONFIG_CPU 0x00000400
-+#define AR2315_CONFIG_PCIAHB 0x00000800
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
-+/* SPI byteswap */
-+#define AR2315_CONFIG_SPI 0x00008000
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
-+#define AR2315_CONFIG_BIG 0x00000400
-+
-+/*
-+ * NMI control
-+ */
-+#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010)
-+
-+#define AR2315_NMI_EN 1
-+
-+/*
-+ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0).
-+ */
-+#define AR2315_SREV (AR2315_DSLBASE + 0x0014)
-+
-+#define AR2315_REV_MAJ 0x00f0
-+#define AR2315_REV_MAJ_S 4
-+#define AR2315_REV_MIN 0x000f
-+#define AR2315_REV_MIN_S 0
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN)
-+
-+/*
-+ * Interface Enable
-+ */
-+#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018)
-+
-+#define AR2315_IF_MASK 0x00000007
-+#define AR2315_IF_DISABLED 0
-+#define AR2315_IF_PCI 1
-+#define AR2315_IF_TS_LOCAL 2
-+/* only for emulation with separate pins */
-+#define AR2315_IF_ALL 3
-+#define AR2315_IF_LOCAL_HOST 0x00000008
-+#define AR2315_IF_PCI_HOST 0x00000010
-+#define AR2315_IF_PCI_INTR 0x00000020
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
-+#define AR2315_IF_PCI_CLK_INPUT 0
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
-+#define AR2315_IF_PCI_CLK_SHIFT 16
-+
-+/*
-+ * APB Interrupt control
-+ */
-+
-+#define AR2315_ISR (AR2315_DSLBASE + 0x0020)
-+#define AR2315_IMR (AR2315_DSLBASE + 0x0024)
-+#define AR2315_GISR (AR2315_DSLBASE + 0x0028)
-+
-+#define AR2315_ISR_UART0 0x0001 /* high speed UART */
-+#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */
-+#define AR2315_ISR_SPI 0x0004 /* SPI bus */
-+#define AR2315_ISR_AHB 0x0008 /* AHB error */
-+#define AR2315_ISR_APB 0x0010 /* APB error */
-+#define AR2315_ISR_TIMER 0x0020 /* timer */
-+#define AR2315_ISR_GPIO 0x0040 /* GPIO */
-+#define AR2315_ISR_WD 0x0080 /* watchdog */
-+#define AR2315_ISR_IR_RSVD 0x0100 /* IR */
-+
-+#define AR2315_GISR_MISC 0x0001
-+#define AR2315_GISR_WLAN0 0x0002
-+#define AR2315_GISR_MPEGTS_RSVD 0x0004
-+#define AR2315_GISR_LOCALPCI 0x0008
-+#define AR2315_GISR_WMACPOLL 0x0010
-+#define AR2315_GISR_TIMER 0x0020
-+#define AR2315_GISR_ETHERNET 0x0040
-+
-+/*
-+ * Interrupt routing from IO to the processor IP bits
-+ * Define our inter mask and level
-+ */
-+#define AR2315_INTR_MISCIO SR_IBIT3
-+#define AR2315_INTR_WLAN0 SR_IBIT4
-+#define AR2315_INTR_ENET0 SR_IBIT5
-+#define AR2315_INTR_LOCALPCI SR_IBIT6
-+#define AR2315_INTR_WMACPOLL SR_IBIT7
-+#define AR2315_INTR_COMPARE SR_IBIT8
-+
-+/*
-+ * Timers
-+ */
-+#define AR2315_TIMER (AR2315_DSLBASE + 0x0030)
-+#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034)
-+#define AR2315_WD (AR2315_DSLBASE + 0x0038)
-+#define AR2315_WDC (AR2315_DSLBASE + 0x003c)
-+
-+#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000
-+#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */
-+#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */
-+
-+/*
-+ * CPU Performance Counters
-+ */
-+#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048)
-+#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c)
-+
-+#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */
-+#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */
-+#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */
-+#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */
-+#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */
-+#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */
-+#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */
-+
-+#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */
-+#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */
-+#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */
-+#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */
-+#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */
-+#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */
-+#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */
-+
-+/*
-+ * AHB Error Reporting.
-+ */
-+#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */
-+#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */
-+#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */
-+#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */
-+#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */
-+
-+#define AHB_ERROR_DET 1 /* AHB Error has been detected, */
-+ /* write 1 to clear all bits in ERR0 */
-+#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
-+#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
-+
-+#define AR2315_PROCERR_HMAST 0x0000000f
-+#define AR2315_PROCERR_HMAST_DFLT 0
-+#define AR2315_PROCERR_HMAST_WMAC 1
-+#define AR2315_PROCERR_HMAST_ENET 2
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
-+#define AR2315_PROCERR_HMAST_LOCAL 4
-+#define AR2315_PROCERR_HMAST_CPU 5
-+#define AR2315_PROCERR_HMAST_PCITGT 6
-+
-+#define AR2315_PROCERR_HMAST_S 0
-+#define AR2315_PROCERR_HWRITE 0x00000010
-+#define AR2315_PROCERR_HSIZE 0x00000060
-+#define AR2315_PROCERR_HSIZE_S 5
-+#define AR2315_PROCERR_HTRANS 0x00000180
-+#define AR2315_PROCERR_HTRANS_S 7
-+#define AR2315_PROCERR_HBURST 0x00000e00
-+#define AR2315_PROCERR_HBURST_S 9
-+
-+/*
-+ * Clock Control
-+ */
-+#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064)
-+#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068)
-+#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c)
-+#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070)
-+#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074)
-+#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080)
-+#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084)
-+
-+/* PLLc Control fields */
-+#define PLLC_REF_DIV_M 0x00000003
-+#define PLLC_REF_DIV_S 0
-+#define PLLC_FDBACK_DIV_M 0x0000007C
-+#define PLLC_FDBACK_DIV_S 2
-+#define PLLC_ADD_FDBACK_DIV_M 0x00000080
-+#define PLLC_ADD_FDBACK_DIV_S 7
-+#define PLLC_CLKC_DIV_M 0x0001c000
-+#define PLLC_CLKC_DIV_S 14
-+#define PLLC_CLKM_DIV_M 0x00700000
-+#define PLLC_CLKM_DIV_S 20
-+
-+/* CPU CLK Control fields */
-+#define CPUCLK_CLK_SEL_M 0x00000003
-+#define CPUCLK_CLK_SEL_S 0
-+#define CPUCLK_CLK_DIV_M 0x0000000c
-+#define CPUCLK_CLK_DIV_S 2
-+
-+/* AMBA CLK Control fields */
-+#define AMBACLK_CLK_SEL_M 0x00000003
-+#define AMBACLK_CLK_SEL_S 0
-+#define AMBACLK_CLK_DIV_M 0x0000000c
-+#define AMBACLK_CLK_DIV_S 2
-+
-+/* GPIO MMR base address */
-+#define AR2315_GPIO (AR2315_DSLBASE + 0x0088)
-+
-+#define AR2315_RESET_GPIO 5
-+
-+/*
-+ * PCI Clock Control
-+ */
-+#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4)
-+
-+#define AR2315_PCICLK_INPUT_M 0x3
-+#define AR2315_PCICLK_INPUT_S 0
-+
-+#define AR2315_PCICLK_PLLC_CLKM 0
-+#define AR2315_PCICLK_PLLC_CLKM1 1
-+#define AR2315_PCICLK_PLLC_CLKC 2
-+#define AR2315_PCICLK_REF_CLK 3
-+
-+#define AR2315_PCICLK_DIV_M 0xc
-+#define AR2315_PCICLK_DIV_S 2
-+
-+#define AR2315_PCICLK_IN_FREQ 0
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
-+
-+/*
-+ * Observation Control Register
-+ */
-+#define AR2315_OCR (AR2315_DSLBASE + 0x00b0)
-+#define OCR_GPIO0_IRIN 0x0040
-+#define OCR_GPIO1_IROUT 0x0080
-+#define OCR_GPIO3_RXCLR 0x0200
-+
-+/*
-+ * General Clock Control
-+ */
-+
-+#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4)
-+#define MISCCLK_PLLBYPASS_EN 0x00000001
-+#define MISCCLK_PROCREFCLK 0x00000002
-+
-+/*
-+ * SDRAM Controller
-+ * - No read or write buffers are included.
-+ */
-+#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00)
-+#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c)
-+#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10)
-+
-+#define SDRAM_DATA_WIDTH_M 0x00006000
-+#define SDRAM_DATA_WIDTH_S 13
-+
-+#define SDRAM_COL_WIDTH_M 0x00001E00
-+#define SDRAM_COL_WIDTH_S 9
-+
-+#define SDRAM_ROW_WIDTH_M 0x000001E0
-+#define SDRAM_ROW_WIDTH_S 5
-+
-+#define SDRAM_BANKADDR_BITS_M 0x00000018
-+#define SDRAM_BANKADDR_BITS_S 3
-+
-+/*
-+ * PCI Bus Interface Registers
-+ */
-+#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008)
-+#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c)
-+#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */
-+#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */
-+#define AR2315_PCIMISC_RST_MODE 0x00000030
-+#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */
-+#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */
-+#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */
-+#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */
-+#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */
-+#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */
-+#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache
-+ * disable */
-+
-+#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010)
-+
-+#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014)
-+
-+#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100)
-+#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */
-+#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */
-+#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */
-+#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */
-+
-+#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104)
-+#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */
-+#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */
-+#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */
-+#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */
-+
-+#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200)
-+
-+#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400)
-+#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */
-+
-+#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404)
-+#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */
-+
-+#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408)
-+
-+#define AR2315_PCI_ISR (AR2315_PCI + 0x0500) /* write one to clr */
-+#define AR2315_PCI_INT_TX 0x00000001 /* Desc In Completed */
-+#define AR2315_PCI_INT_TXOK 0x00000002 /* Desc In OK */
-+#define AR2315_PCI_INT_TXERR 0x00000004 /* Desc In ERR */
-+#define AR2315_PCI_INT_TXEOL 0x00000008 /* Desc In End-of-List */
-+#define AR2315_PCI_INT_RX 0x00000010 /* Desc Out Completed */
-+#define AR2315_PCI_INT_RXOK 0x00000020 /* Desc Out OK */
-+#define AR2315_PCI_INT_RXERR 0x00000040 /* Desc Out ERR */
-+#define AR2315_PCI_INT_RXEOL 0x00000080 /* Desc Out EOL */
-+#define AR2315_PCI_INT_TXOOD 0x00000200 /* Desc In Out-of-Desc */
-+#define AR2315_PCI_INT_DESCMASK 0x0000FFFF /* Desc Mask */
-+#define AR2315_PCI_INT_EXT 0x02000000 /* Extern PCI INTA */
-+#define AR2315_PCI_INT_ABORT 0x04000000 /* PCI bus abort event */
-+
-+#define AR2315_PCI_IMR (AR2315_PCI + 0x0504) /* mask _PCI_ISR bits */
-+
-+#define AR2315_PCI_IER (AR2315_PCI + 0x0508) /* global PCI int en */
-+#define AR2315_PCI_IER_DISABLE 0x00 /* disable pci interrupts */
-+#define AR2315_PCI_IER_ENABLE 0x01 /* enable pci interrupts */
-+
-+#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800)
-+#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804)
-+#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810)
-+#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900)
-+#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904)
-+#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908)
-+
-+/*
-+ * Local Bus Interface Registers
-+ */
-+#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000)
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
-+#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
-+
-+#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004)
-+#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */
-+
-+#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008)
-+#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */
-+
-+#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C)
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
-+#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80
-+#define AR2315_LBM_TIMEOUT_SHFT 7
-+#define AR2315_LBM_PORTMUX 0x07000000
-+
-+#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010)
-+
-+#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100)
-+#define AR2315_LB_TXEN_0 0x01
-+#define AR2315_LB_TXEN_1 0x02
-+#define AR2315_LB_TXEN_2 0x04
-+#define AR2315_LB_TXEN_3 0x08
-+
-+#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104)
-+#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200)
-+
-+#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400)
-+#define AR2315_LB_RXEN 0x01
-+
-+#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404)
-+#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408)
-+
-+#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500)
-+#define AR2315_INT_TX_DESC 0x0001
-+#define AR2315_INT_TX_OK 0x0002
-+#define AR2315_INT_TX_ERR 0x0004
-+#define AR2315_INT_TX_EOF 0x0008
-+#define AR2315_INT_RX_DESC 0x0010
-+#define AR2315_INT_RX_OK 0x0020
-+#define AR2315_INT_RX_ERR 0x0040
-+#define AR2315_INT_RX_EOF 0x0080
-+#define AR2315_INT_TX_TRUNC 0x0100
-+#define AR2315_INT_TX_STARVE 0x0200
-+#define AR2315_INT_LB_TIMEOUT 0x0400
-+#define AR2315_INT_LB_ERR 0x0800
-+#define AR2315_INT_MBOX_WR 0x1000
-+#define AR2315_INT_MBOX_RD 0x2000
-+
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
-+#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504)
-+
-+#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508)
-+#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600)
-+
-+/*
-+ * IR Interface Registers
-+ */
-+#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000)
-+
-+#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */
-+
-+#define AR2315_IR_CONTROL (AR2315_IR + 0x0800)
-+#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */
-+#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */
-+#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor */
-+#define AR2315_IRCTL_SAMPLECLK_SHFT 1
-+#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk div */
-+#define AR2315_IRCTL_OUTPUTCLK_SHFT 14
-+
-+#define AR2315_IR_STATUS (AR2315_IR + 0x0804)
-+#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */
-+#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */
-+
-+#define AR2315_IR_CONFIG (AR2315_IR + 0x0808)
-+#define AR2315_IRCFG_INVIN 0x00000001 /* invert in polarity */
-+#define AR2315_IRCFG_INVOUT 0x00000002 /* invert out polarity */
-+#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */
-+#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0
-+#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100
-+#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00
-+#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000
-+#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000
-+#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000
-+
-+/*
-+ * We need some arbitrary non-zero value to be programmed to the BAR1 register
-+ * of PCI host controller to enable DMA. The same value should be used as the
-+ * offset to calculate the physical address of DMA buffer for PCI devices.
-+ */
-+#define AR2315_PCI_HOST_SDRAM_BASEADDR 0x20000000
-+
-+/* ??? access BAR */
-+#define AR2315_PCI_HOST_MBAR0 0x10000000
-+/* RAM access BAR */
-+#define AR2315_PCI_HOST_MBAR1 AR2315_PCI_HOST_SDRAM_BASEADDR
-+/* ??? access BAR */
-+#define AR2315_PCI_HOST_MBAR2 0x30000000
-+
-+#endif /* __ASM_MACH_AR231X_AR2315_REGS_H */
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h
-@@ -0,0 +1,235 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ */
-+
-+#ifndef __ASM_MACH_AR231X_AR5312_REGS_H
-+#define __ASM_MACH_AR231X_AR5312_REGS_H
-+
-+#include <asm/addrspace.h>
-+
-+/*
-+ * IRQs
-+ */
-+#define AR5312_IRQ_WLAN0_INTRS (MIPS_CPU_IRQ_BASE+2) /* C0_CAUSE: 0x0400 */
-+#define AR5312_IRQ_ENET0_INTRS (MIPS_CPU_IRQ_BASE+3) /* C0_CAUSE: 0x0800 */
-+#define AR5312_IRQ_ENET1_INTRS (MIPS_CPU_IRQ_BASE+4) /* C0_CAUSE: 0x1000 */
-+#define AR5312_IRQ_WLAN1_INTRS (MIPS_CPU_IRQ_BASE+5) /* C0_CAUSE: 0x2000 */
-+#define AR5312_IRQ_MISC_INTRS (MIPS_CPU_IRQ_BASE+6) /* C0_CAUSE: 0x4000 */
-+
-+/*
-+ * Miscellaneous interrupts, which share IP6.
-+ */
-+#define AR5312_MISC_IRQ_TIMER (AR231X_MISC_IRQ_BASE+0)
-+#define AR5312_MISC_IRQ_AHB_PROC (AR231X_MISC_IRQ_BASE+1)
-+#define AR5312_MISC_IRQ_AHB_DMA (AR231X_MISC_IRQ_BASE+2)
-+#define AR5312_MISC_IRQ_GPIO (AR231X_MISC_IRQ_BASE+3)
-+#define AR5312_MISC_IRQ_UART0 (AR231X_MISC_IRQ_BASE+4)
-+#define AR5312_MISC_IRQ_UART0_DMA (AR231X_MISC_IRQ_BASE+5)
-+#define AR5312_MISC_IRQ_WATCHDOG (AR231X_MISC_IRQ_BASE+6)
-+#define AR5312_MISC_IRQ_LOCAL (AR231X_MISC_IRQ_BASE+7)
-+#define AR5312_MISC_IRQ_SPI (AR231X_MISC_IRQ_BASE+8)
-+#define AR5312_MISC_IRQ_COUNT 9
-+
-+/*
-+ * Address Map
-+ */
-+#define AR5312_WLAN0 0x18000000
-+#define AR5312_WLAN1 0x18500000
-+#define AR5312_ENET0 0x18100000
-+#define AR5312_ENET1 0x18200000
-+#define AR5312_SDRAMCTL 0x18300000
-+#define AR5312_FLASHCTL 0x18400000
-+#define AR5312_APBBASE 0x1c000000
-+#define AR5312_UART0 0x1c000000 /* UART MMR */
-+#define AR5312_FLASH 0x1e000000
-+
-+/*
-+ * AR5312_NUM_ENET_MAC defines the number of ethernet MACs that
-+ * should be considered available. The AR5312 supports 2 enet MACS,
-+ * even though many reference boards only actually use 1 of them
-+ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch.
-+ * The AR2312 supports 1 enet MAC.
-+ */
-+#define AR5312_NUM_ENET_MAC 2
-+
-+/*
-+ * Need these defines to determine true number of ethernet MACs
-+ */
-+#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
-+#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
-+#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
-+
-+/* MII registers offset inside Ethernet MMR region */
-+#define AR5312_ENET0_MII (AR5312_ENET0 + 0x14)
-+#define AR5312_ENET1_MII (AR5312_ENET1 + 0x14)
-+
-+/*
-+ * AR5312_NUM_WMAC defines the number of Wireless MACs that\
-+ * should be considered available.
-+ */
-+#define AR5312_NUM_WMAC 2
-+
-+/* Reset/Timer Block Address Map */
-+#define AR5312_RESETTMR (AR5312_APBBASE + 0x3000)
-+#define AR5312_TIMER (AR5312_RESETTMR + 0x0000) /* countdown timer */
-+#define AR5312_WD_CTRL (AR5312_RESETTMR + 0x0008) /* watchdog cntrl */
-+#define AR5312_WD_TIMER (AR5312_RESETTMR + 0x000c) /* watchdog timer */
-+#define AR5312_ISR (AR5312_RESETTMR + 0x0010) /* Intr Status Reg */
-+#define AR5312_IMR (AR5312_RESETTMR + 0x0014) /* Intr Mask Reg */
-+#define AR5312_RESET (AR5312_RESETTMR + 0x0020)
-+#define AR5312_CLOCKCTL1 (AR5312_RESETTMR + 0x0064)
-+#define AR5312_SCRATCH (AR5312_RESETTMR + 0x006c)
-+#define AR5312_PROCADDR (AR5312_RESETTMR + 0x0070)
-+#define AR5312_PROC1 (AR5312_RESETTMR + 0x0074)
-+#define AR5312_DMAADDR (AR5312_RESETTMR + 0x0078)
-+#define AR5312_DMA1 (AR5312_RESETTMR + 0x007c)
-+#define AR5312_ENABLE (AR5312_RESETTMR + 0x0080) /* interface enb */
-+#define AR5312_REV (AR5312_RESETTMR + 0x0090) /* revision */
-+
-+/* AR5312_WD_CTRL register bit field definitions */
-+#define AR5312_WD_CTRL_IGNORE_EXPIRATION 0x0000
-+#define AR5312_WD_CTRL_NMI 0x0001
-+#define AR5312_WD_CTRL_RESET 0x0002
-+
-+/* AR5312_ISR register bit field definitions */
-+#define AR5312_ISR_TIMER 0x0001
-+#define AR5312_ISR_AHBPROC 0x0002
-+#define AR5312_ISR_AHBDMA 0x0004
-+#define AR5312_ISR_GPIO 0x0008
-+#define AR5312_ISR_UART0 0x0010
-+#define AR5312_ISR_UART0DMA 0x0020
-+#define AR5312_ISR_WD 0x0040
-+#define AR5312_ISR_LOCAL 0x0080
-+
-+/* AR5312_RESET register bit field definitions */
-+#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */
-+#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */
-+#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */
-+#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
-+#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
-+#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */
-+#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */
-+#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */
-+#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
-+#define AR5312_RESET_APB 0x00000400 /* cold reset APB (ar5312) */
-+#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
-+#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
-+#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */
-+#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the processor */
-+#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */
-+#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */
-+#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
-+#define AR5312_RESET_WDOG 0x00100000 /* last reset was a watchdog */
-+
-+#define AR5312_RESET_WMAC0_BITS \
-+ (AR5312_RESET_WLAN0 |\
-+ AR5312_RESET_WARM_WLAN0_MAC |\
-+ AR5312_RESET_WARM_WLAN0_BB)
-+
-+#define AR5312_RESET_WMAC1_BITS \
-+ (AR5312_RESET_WLAN1 |\
-+ AR5312_RESET_WARM_WLAN1_MAC |\
-+ AR5312_RESET_WARM_WLAN1_BB)
-+
-+/* AR5312_CLOCKCTL1 register bit field definitions */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR5312 and AR2312 */
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
-+
-+/* Valid for AR2313 */
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
-+
-+/* AR5312_ENABLE register bit field definitions */
-+#define AR5312_ENABLE_WLAN0 0x0001
-+#define AR5312_ENABLE_ENET0 0x0002
-+#define AR5312_ENABLE_ENET1 0x0004
-+#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */
-+#define AR5312_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */
-+#define AR5312_ENABLE_WLAN1 \
-+ (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
-+ AR5312_ENABLE_WLAN1_DMA)
-+
-+/* AR5312_REV register bit field definitions */
-+#define AR5312_REV_WMAC_MAJ 0xf000
-+#define AR5312_REV_WMAC_MAJ_S 12
-+#define AR5312_REV_WMAC_MIN 0x0f00
-+#define AR5312_REV_WMAC_MIN_S 8
-+#define AR5312_REV_MAJ 0x00f0
-+#define AR5312_REV_MAJ_S 4
-+#define AR5312_REV_MIN 0x000f
-+#define AR5312_REV_MIN_S 0
-+#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN)
-+
-+/* Major revision numbers, bits 7..4 of Revision ID register */
-+#define AR5312_REV_MAJ_AR5312 0x4
-+#define AR5312_REV_MAJ_AR2313 0x5
-+
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
-+
-+/* AR5312_FLASHCTL register bit field definitions */
-+#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */
-+#define FLASHCTL_IDCY_S 0
-+#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
-+#define FLASHCTL_WST1_S 5
-+#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
-+#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
-+#define FLASHCTL_WST2_S 11
-+#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */
-+#define FLASHCTL_AC_S 16
-+#define FLASHCTL_AC_128K 0x00000000
-+#define FLASHCTL_AC_256K 0x00010000
-+#define FLASHCTL_AC_512K 0x00020000
-+#define FLASHCTL_AC_1M 0x00030000
-+#define FLASHCTL_AC_2M 0x00040000
-+#define FLASHCTL_AC_4M 0x00050000
-+#define FLASHCTL_AC_8M 0x00060000
-+#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
-+#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
-+#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */
-+#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */
-+#define FLASHCTL_WP 0x04000000 /* Write protect */
-+#define FLASHCTL_BM 0x08000000 /* Burst mode */
-+#define FLASHCTL_MW 0x30000000 /* Memory width */
-+#define FLASHCTL_MW8 0x00000000 /* Memory width x8 */
-+#define FLASHCTL_MW16 0x10000000 /* Memory width x16 */
-+#define FLASHCTL_MW32 0x20000000 /* Memory width x32 (not supported) */
-+#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */
-+#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */
-+#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */
-+
-+/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */
-+#define AR5312_FLASHCTL0 (AR5312_FLASHCTL + 0x00)
-+#define AR5312_FLASHCTL1 (AR5312_FLASHCTL + 0x04)
-+#define AR5312_FLASHCTL2 (AR5312_FLASHCTL + 0x08)
-+
-+/* ARM SDRAM Controller -- just enough to determine memory size */
-+#define AR5312_MEM_CFG1 (AR5312_SDRAMCTL + 0x04)
-+#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */
-+#define MEM_CFG1_AC0_S 8
-+#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */
-+#define MEM_CFG1_AC1_S 12
-+
-+#define AR5312_GPIO (AR5312_APBBASE + 0x2000)
-+
-+#endif /* __ASM_MACH_AR231X_AR5312_REGS_H */
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.c
-@@ -0,0 +1,476 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/leds.h>
-+#include <linux/gpio.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <linux/irq.h>
-+#include <linux/io.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar5312_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+
-+static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc)
-+{
-+ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR5312_ISR) &
-+ ar231x_read_reg(AR5312_IMR);
-+
-+ if (ar231x_misc_intrs & AR5312_ISR_TIMER) {
-+ generic_handle_irq(AR5312_MISC_IRQ_TIMER);
-+ (void)ar231x_read_reg(AR5312_TIMER);
-+ } else if (ar231x_misc_intrs & AR5312_ISR_AHBPROC)
-+ generic_handle_irq(AR5312_MISC_IRQ_AHB_PROC);
-+ else if ((ar231x_misc_intrs & AR5312_ISR_UART0))
-+ generic_handle_irq(AR5312_MISC_IRQ_UART0);
-+ else if (ar231x_misc_intrs & AR5312_ISR_WD)
-+ generic_handle_irq(AR5312_MISC_IRQ_WATCHDOG);
-+ else
-+ spurious_interrupt();
-+}
-+
-+static asmlinkage void
-+ar5312_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP2)
-+ do_IRQ(AR5312_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP3)
-+ do_IRQ(AR5312_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR5312_IRQ_ENET1_INTRS);
-+ else if (pending & CAUSEF_IP5)
-+ do_IRQ(AR5312_IRQ_WLAN1_INTRS);
-+ else if (pending & CAUSEF_IP6)
-+ do_IRQ(AR5312_IRQ_MISC_INTRS);
-+ else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR231X_IRQ_CPU_CLOCK);
-+ else
-+ spurious_interrupt();
-+}
-+
-+/* Enable the specified AR5312_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_irq_unmask(struct irq_data *d)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR5312_IMR);
-+ imr |= 1 << (d->irq - AR231X_MISC_IRQ_BASE);
-+ ar231x_write_reg(AR5312_IMR, imr);
-+}
-+
-+/* Disable the specified AR5312_MISC_IRQ interrupt */
-+static void
-+ar5312_misc_irq_mask(struct irq_data *d)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR5312_IMR);
-+ imr &= ~(1 << (d->irq - AR231X_MISC_IRQ_BASE));
-+ ar231x_write_reg(AR5312_IMR, imr);
-+ ar231x_read_reg(AR5312_IMR); /* flush write buffer */
-+}
-+
-+static struct irq_chip ar5312_misc_irq_chip = {
-+ .name = "AR5312-MISC",
-+ .irq_unmask = ar5312_misc_irq_unmask,
-+ .irq_mask = ar5312_misc_irq_mask,
-+};
-+
-+static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ u32 proc1 = ar231x_read_reg(AR5312_PROC1);
-+ u32 proc_addr = ar231x_read_reg(AR5312_PROCADDR); /* clears error */
-+ u32 dma1 = ar231x_read_reg(AR5312_DMA1);
-+ u32 dma_addr = ar231x_read_reg(AR5312_DMAADDR); /* clears error */
-+
-+ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
-+ proc_addr, proc1, dma_addr, dma1);
-+
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ar5312_ahb_proc_interrupt = {
-+ .handler = ar5312_ahb_proc_handler,
-+ .name = "ar5312_ahb_proc_interrupt",
-+};
-+
-+void __init ar5312_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_5312())
-+ return;
-+
-+ ar231x_irq_dispatch = ar5312_irq_dispatch;
-+ for (i = 0; i < AR5312_MISC_IRQ_COUNT; i++) {
-+ int irq = AR231X_MISC_IRQ_BASE + i;
-+
-+ irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR5312_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt);
-+ irq_set_chained_handler(AR5312_IRQ_MISC_INTRS, ar5312_misc_irq_handler);
-+}
-+
-+static void ar5312_device_reset_set(u32 mask)
-+{
-+ u32 val;
-+
-+ val = ar231x_read_reg(AR5312_RESET);
-+ ar231x_write_reg(AR5312_RESET, val | mask);
-+}
-+
-+static void ar5312_device_reset_clear(u32 mask)
-+{
-+ u32 val;
-+
-+ val = ar231x_read_reg(AR5312_RESET);
-+ ar231x_write_reg(AR5312_RESET, val & ~mask);
-+}
-+
-+static struct physmap_flash_data ar5312_flash_data = {
-+ .width = 2,
-+};
-+
-+static struct resource ar5312_flash_resource = {
-+ .start = AR5312_FLASH,
-+ .end = AR5312_FLASH + 0x800000 - 1,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct ar231x_eth ar5312_eth0_data = {
-+ .reset_set = ar5312_device_reset_set,
-+ .reset_clear = ar5312_device_reset_clear,
-+ .reset_mac = AR5312_RESET_ENET0,
-+ .reset_phy = AR5312_RESET_EPHY0,
-+ .config = &ar231x_board,
-+};
-+
-+static struct ar231x_eth ar5312_eth1_data = {
-+ .reset_set = ar5312_device_reset_set,
-+ .reset_clear = ar5312_device_reset_clear,
-+ .reset_mac = AR5312_RESET_ENET1,
-+ .reset_phy = AR5312_RESET_EPHY1,
-+ .config = &ar231x_board,
-+};
-+
-+static struct platform_device ar5312_physmap_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev.platform_data = &ar5312_flash_data,
-+ .resource = &ar5312_flash_resource,
-+ .num_resources = 1,
-+};
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar5312_leds[] = {
-+ { .name = "wlan", .gpio = 0, .active_low = 1, },
-+};
-+
-+static const struct gpio_led_platform_data ar5312_led_data = {
-+ .num_leds = ARRAY_SIZE(ar5312_leds),
-+ .leds = (void *)ar5312_leds,
-+};
-+
-+static struct platform_device ar5312_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = (void *)&ar5312_led_data,
-+};
-+#endif
-+
-+/*
-+ * NB: This mapping size is larger than the actual flash size,
-+ * but this shouldn't be a problem here, because the flash
-+ * will simply be mapped multiple times.
-+ */
-+static char __init *ar5312_flash_limit(void)
-+{
-+ u32 ctl;
-+ /*
-+ * Configure flash bank 0.
-+ * Assume 8M window size. Flash will be aliased if it's smaller
-+ */
-+ ctl = FLASHCTL_E |
-+ FLASHCTL_AC_8M |
-+ FLASHCTL_RBLE |
-+ (0x01 << FLASHCTL_IDCY_S) |
-+ (0x07 << FLASHCTL_WST1_S) |
-+ (0x07 << FLASHCTL_WST2_S) |
-+ (ar231x_read_reg(AR5312_FLASHCTL0) & FLASHCTL_MW);
-+
-+ ar231x_write_reg(AR5312_FLASHCTL0, ctl);
-+
-+ /* Disable other flash banks */
-+ ar231x_write_reg(AR5312_FLASHCTL1,
-+ ar231x_read_reg(AR5312_FLASHCTL1) &
-+ ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ ar231x_write_reg(AR5312_FLASHCTL2,
-+ ar231x_read_reg(AR5312_FLASHCTL2) &
-+ ~(FLASHCTL_E | FLASHCTL_AC));
-+
-+ return (char *)KSEG1ADDR(AR5312_FLASH + 0x800000);
-+}
-+
-+int __init ar5312_init_devices(void)
-+{
-+ struct ar231x_boarddata *config;
-+ u32 fctl = 0;
-+ u8 *c;
-+
-+ if (!is_5312())
-+ return 0;
-+
-+ /* Locate board/radio config data */
-+ ar231x_find_config(ar5312_flash_limit());
-+ config = ar231x_board.config;
-+
-+ /* AR2313 has CPU minor rev. 10 */
-+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
-+ ar231x_devtype = DEV_TYPE_AR2313;
-+
-+ /* AR2312 shares the same Silicon ID as AR5312 */
-+ else if (config->flags & BD_ISCASPER)
-+ ar231x_devtype = DEV_TYPE_AR2312;
-+
-+ /* Everything else is probably AR5312 or compatible */
-+ else
-+ ar231x_devtype = DEV_TYPE_AR5312;
-+
-+ /* fixup flash width */
-+ fctl = ar231x_read_reg(AR5312_FLASHCTL) & FLASHCTL_MW;
-+ switch (fctl) {
-+ case FLASHCTL_MW16:
-+ ar5312_flash_data.width = 2;
-+ break;
-+ case FLASHCTL_MW8:
-+ default:
-+ ar5312_flash_data.width = 1;
-+ break;
-+ }
-+
-+ platform_device_register(&ar5312_physmap_flash);
-+
-+#ifdef CONFIG_LEDS_GPIO
-+ ar5312_leds[0].gpio = config->sys_led_gpio;
-+ platform_device_register(&ar5312_gpio_leds);
-+#endif
-+
-+ /* Fix up MAC addresses if necessary */
-+ if (is_broadcast_ether_addr(config->enet0_mac))
-+ ether_addr_copy(config->enet0_mac, config->enet1_mac);
-+
-+ /* If ENET0 and ENET1 have the same mac address,
-+ * increment the one from ENET1 */
-+ if (ether_addr_equal(config->enet0_mac, config->enet1_mac)) {
-+ c = config->enet1_mac + 5;
-+ while ((c >= config->enet1_mac) && !(++(*c)))
-+ c--;
-+ }
-+
-+ switch (ar231x_devtype) {
-+ case DEV_TYPE_AR5312:
-+ ar5312_eth0_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(0, AR5312_ENET0, "eth0_mii",
-+ AR5312_ENET0_MII, AR5312_IRQ_ENET0_INTRS,
-+ &ar5312_eth0_data);
-+
-+ ar5312_eth1_data.macaddr = config->enet1_mac;
-+ ar231x_add_ethernet(1, AR5312_ENET1, "eth1_mii",
-+ AR5312_ENET1_MII, AR5312_IRQ_ENET1_INTRS,
-+ &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+
-+ if (!(config->flags & BD_WLAN0))
-+ break;
-+
-+ ar231x_add_wmac(0, AR5312_WLAN0, AR5312_IRQ_WLAN0_INTRS);
-+ break;
-+ /*
-+ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC
-+ * of ENET1. Atheros calls it 'twisted' for a reason :)
-+ */
-+ case DEV_TYPE_AR2312:
-+ case DEV_TYPE_AR2313:
-+ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy;
-+ ar5312_eth1_data.macaddr = config->enet0_mac;
-+ ar231x_add_ethernet(1, AR5312_ENET1, "eth0_mii",
-+ AR5312_ENET0_MII, AR5312_IRQ_ENET1_INTRS,
-+ &ar5312_eth1_data);
-+
-+ if (!ar231x_board.radio)
-+ return 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if (config->flags & BD_WLAN1)
-+ ar231x_add_wmac(1, AR5312_WLAN1, AR5312_IRQ_WLAN1_INTRS);
-+
-+ return 0;
-+}
-+
-+static void ar5312_restart(char *command)
-+{
-+ /* reset the system */
-+ local_irq_disable();
-+ while (1)
-+ ar231x_write_reg(AR5312_RESET, AR5312_RESET_SYSTEM);
-+}
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
-+
-+static int __init
-+ar5312_cpu_frequency(void)
-+{
-+ unsigned int scratch;
-+ unsigned int predivide_mask, predivide_shift;
-+ unsigned int multiplier_mask, multiplier_shift;
-+ unsigned int clock_ctl1, predivide_select, predivisor, multiplier;
-+ unsigned int doubler_mask;
-+ u16 devid;
-+
-+ /* Trust the bootrom's idea of cpu frequency. */
-+ scratch = ar231x_read_reg(AR5312_SCRATCH);
-+ if (scratch)
-+ return scratch;
-+
-+ devid = ar231x_read_reg(AR5312_REV);
-+ devid &= AR5312_REV_MAJ;
-+ devid >>= AR5312_REV_MAJ_S;
-+ if (devid == AR5312_REV_MAJ_AR2313) {
-+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
-+ } else { /* AR5312 and AR2312 */
-+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
-+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
-+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
-+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
-+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
-+ }
-+
-+ /*
-+ * Clocking is derived from a fixed 40MHz input clock.
-+ *
-+ * cpu_freq = input_clock * MULT (where MULT is PLL multiplier)
-+ * sys_freq = cpu_freq / 4 (used for APB clock, serial,
-+ * flash, Timer, Watchdog Timer)
-+ *
-+ * cnt_freq = cpu_freq / 2 (use for CPU count/compare)
-+ *
-+ * So, for example, with a PLL multiplier of 5, we have
-+ *
-+ * cpu_freq = 200MHz
-+ * sys_freq = 50MHz
-+ * cnt_freq = 100MHz
-+ *
-+ * We compute the CPU frequency, based on PLL settings.
-+ */
-+
-+ clock_ctl1 = ar231x_read_reg(AR5312_CLOCKCTL1);
-+ predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift;
-+ predivisor = clockctl1_predivide_table[predivide_select];
-+ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
-+
-+ if (clock_ctl1 & doubler_mask)
-+ multiplier = multiplier << 1;
-+
-+ return (40000000 / predivisor) * multiplier;
-+}
-+
-+static inline int
-+ar5312_sys_frequency(void)
-+{
-+ return ar5312_cpu_frequency() / 4;
-+}
-+
-+void __init
-+ar5312_time_init(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar5312_prom_init(void)
-+{
-+ u32 memsize, memcfg, bank0AC, bank1AC;
-+ u32 devid;
-+
-+ if (!is_5312())
-+ return;
-+
-+ /* Detect memory size */
-+ memcfg = ar231x_read_reg(AR5312_MEM_CFG1);
-+ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S;
-+ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S;
-+ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) +
-+ (bank1AC ? (1 << (bank1AC+1)) : 0);
-+ memsize <<= 20;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ devid = ar231x_read_reg(AR5312_REV);
-+ devid >>= AR5312_REV_WMAC_MIN_S;
-+ devid &= AR5312_REV_CHIP;
-+ ar231x_board.devid = (u16)devid;
-+}
-+
-+void __init
-+ar5312_plat_setup(void)
-+{
-+ if (!is_5312())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ ar231x_read_reg(AR5312_PROCADDR);
-+ ar231x_read_reg(AR5312_DMAADDR);
-+ ar231x_write_reg(AR5312_WD_CTRL, AR5312_WD_CTRL_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar5312_restart;
-+ ar231x_serial_setup(AR5312_UART0, AR5312_MISC_IRQ_UART0,
-+ ar5312_sys_frequency());
-+}
-+
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.c
-@@ -0,0 +1,431 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
-+ * Copyright (C) 2006 FON Technology, SL.
-+ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com>
-+ */
-+
-+/*
-+ * Platform devices for Atheros SoCs
-+ */
-+
-+#include <generated/autoconf.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/kernel.h>
-+#include <linux/reboot.h>
-+#include <linux/delay.h>
-+#include <linux/leds.h>
-+#include <linux/gpio.h>
-+#include <asm/bootinfo.h>
-+#include <asm/reboot.h>
-+#include <asm/time.h>
-+#include <linux/irq.h>
-+#include <linux/io.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar2315_regs.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar2315.h"
-+
-+static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc)
-+{
-+ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) &
-+ ar231x_read_reg(AR2315_IMR);
-+
-+ if (misc_intr & AR2315_ISR_SPI)
-+ generic_handle_irq(AR2315_MISC_IRQ_SPI);
-+ else if (misc_intr & AR2315_ISR_TIMER)
-+ generic_handle_irq(AR2315_MISC_IRQ_TIMER);
-+ else if (misc_intr & AR2315_ISR_AHB)
-+ generic_handle_irq(AR2315_MISC_IRQ_AHB);
-+ else if (misc_intr & AR2315_ISR_GPIO) {
-+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_GPIO);
-+ generic_handle_irq(AR2315_MISC_IRQ_GPIO);
-+ } else if (misc_intr & AR2315_ISR_UART0)
-+ generic_handle_irq(AR2315_MISC_IRQ_UART0);
-+ else if (misc_intr & AR2315_ISR_WD) {
-+ ar231x_write_reg(AR2315_ISR, AR2315_ISR_WD);
-+ generic_handle_irq(AR2315_MISC_IRQ_WATCHDOG);
-+ } else
-+ spurious_interrupt();
-+}
-+
-+/*
-+ * Called when an interrupt is received, this function
-+ * determines exactly which interrupt it was, and it
-+ * invokes the appropriate handler.
-+ *
-+ * Implicitly, we also define interrupt priority by
-+ * choosing which to dispatch first.
-+ */
-+static asmlinkage void
-+ar2315_irq_dispatch(void)
-+{
-+ int pending = read_c0_status() & read_c0_cause();
-+
-+ if (pending & CAUSEF_IP3)
-+ do_IRQ(AR2315_IRQ_WLAN0_INTRS);
-+ else if (pending & CAUSEF_IP4)
-+ do_IRQ(AR2315_IRQ_ENET0_INTRS);
-+ else if (pending & CAUSEF_IP2)
-+ do_IRQ(AR2315_IRQ_MISC_INTRS);
-+ else if (pending & CAUSEF_IP7)
-+ do_IRQ(AR231X_IRQ_CPU_CLOCK);
-+ else
-+ spurious_interrupt();
-+}
-+
-+static void
-+ar2315_misc_irq_unmask(struct irq_data *d)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ imr |= 1 << (d->irq - AR231X_MISC_IRQ_BASE);
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static void
-+ar2315_misc_irq_mask(struct irq_data *d)
-+{
-+ unsigned int imr;
-+
-+ imr = ar231x_read_reg(AR2315_IMR);
-+ imr &= ~(1 << (d->irq - AR231X_MISC_IRQ_BASE));
-+ ar231x_write_reg(AR2315_IMR, imr);
-+}
-+
-+static struct irq_chip ar2315_misc_irq_chip = {
-+ .name = "AR2315-MISC",
-+ .irq_unmask = ar2315_misc_irq_unmask,
-+ .irq_mask = ar2315_misc_irq_mask,
-+};
-+
-+static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id)
-+{
-+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+
-+ pr_emerg("AHB fatal error\n");
-+ machine_restart("AHB error"); /* Catastrophic failure */
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static struct irqaction ar2315_ahb_proc_interrupt = {
-+ .handler = ar2315_ahb_proc_handler,
-+ .name = "ar2315_ahb_proc_interrupt",
-+};
-+
-+void
-+ar2315_irq_init(void)
-+{
-+ int i;
-+
-+ if (!is_2315())
-+ return;
-+
-+ ar231x_irq_dispatch = ar2315_irq_dispatch;
-+ for (i = 0; i < AR2315_MISC_IRQ_COUNT; i++) {
-+ int irq = AR231X_MISC_IRQ_BASE + i;
-+
-+ irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip,
-+ handle_level_irq);
-+ }
-+ setup_irq(AR2315_MISC_IRQ_AHB, &ar2315_ahb_proc_interrupt);
-+ irq_set_chained_handler(AR2315_IRQ_MISC_INTRS, ar2315_misc_irq_handler);
-+}
-+
-+static void ar2315_device_reset_set(u32 mask)
-+{
-+ u32 val;
-+
-+ val = ar231x_read_reg(AR2315_RESET);
-+ ar231x_write_reg(AR2315_RESET, val | mask);
-+}
-+
-+static void ar2315_device_reset_clear(u32 mask)
-+{
-+ u32 val;
-+
-+ val = ar231x_read_reg(AR2315_RESET);
-+ ar231x_write_reg(AR2315_RESET, val & ~mask);
-+}
-+
-+static struct ar231x_eth ar2315_eth_data = {
-+ .reset_set = ar2315_device_reset_set,
-+ .reset_clear = ar2315_device_reset_clear,
-+ .reset_mac = AR2315_RESET_ENET0,
-+ .reset_phy = AR2315_RESET_EPHY0,
-+ .config = &ar231x_board,
-+};
-+
-+static struct resource ar2315_spiflash_res[] = {
-+ {
-+ .name = "spiflash_read",
-+ .flags = IORESOURCE_MEM,
-+ .start = AR2315_SPI_READ,
-+ .end = AR2315_SPI_READ + 0x1000000 - 1,
-+ },
-+ {
-+ .name = "spiflash_mmr",
-+ .flags = IORESOURCE_MEM,
-+ .start = AR2315_SPI_MMR,
-+ .end = AR2315_SPI_MMR + 12 - 1,
-+ },
-+};
-+
-+static struct platform_device ar2315_spiflash = {
-+ .id = 0,
-+ .name = "ar2315-spiflash",
-+ .resource = ar2315_spiflash_res,
-+ .num_resources = ARRAY_SIZE(ar2315_spiflash_res)
-+};
-+
-+static struct resource ar2315_wdt_res[] = {
-+ {
-+ .flags = IORESOURCE_MEM,
-+ .start = AR2315_WD,
-+ .end = AR2315_WD + 8 - 1,
-+ },
-+ {
-+ .flags = IORESOURCE_IRQ,
-+ .start = AR2315_MISC_IRQ_WATCHDOG,
-+ .end = AR2315_MISC_IRQ_WATCHDOG,
-+ }
-+};
-+
-+static struct platform_device ar2315_wdt = {
-+ .id = 0,
-+ .name = "ar2315-wdt",
-+ .resource = ar2315_wdt_res,
-+ .num_resources = ARRAY_SIZE(ar2315_wdt_res)
-+};
-+
-+/*
-+ * NB: We use mapping size that is larger than the actual flash size,
-+ * but this shouldn't be a problem here, because the flash will simply
-+ * be mapped multiple times.
-+ */
-+static u8 __init *ar2315_flash_limit(void)
-+{
-+ return (u8 *)KSEG1ADDR(ar2315_spiflash_res[0].end + 1);
-+}
-+
-+#ifdef CONFIG_LEDS_GPIO
-+static struct gpio_led ar2315_leds[6];
-+static struct gpio_led_platform_data ar2315_led_data = {
-+ .leds = (void *)ar2315_leds,
-+};
-+
-+static struct platform_device ar2315_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev = {
-+ .platform_data = (void *)&ar2315_led_data,
-+ }
-+};
-+
-+static void __init
-+ar2315_init_gpio_leds(void)
-+{
-+ static char led_names[6][6];
-+ int i, led = 0;
-+
-+ ar2315_led_data.num_leds = 0;
-+ for (i = 1; i < 8; i++) {
-+ if ((i == AR2315_RESET_GPIO) ||
-+ (i == ar231x_board.config->reset_config_gpio))
-+ continue;
-+
-+ if (i == ar231x_board.config->sys_led_gpio)
-+ strcpy(led_names[led], "wlan");
-+ else
-+ sprintf(led_names[led], "gpio%d", i);
-+
-+ ar2315_leds[led].name = led_names[led];
-+ ar2315_leds[led].gpio = i;
-+ ar2315_leds[led].active_low = 0;
-+ led++;
-+ }
-+ ar2315_led_data.num_leds = led;
-+ platform_device_register(&ar2315_gpio_leds);
-+}
-+#else
-+static inline void ar2315_init_gpio_leds(void)
-+{
-+}
-+#endif
-+
-+int __init
-+ar2315_init_devices(void)
-+{
-+ if (!is_2315())
-+ return 0;
-+
-+ /* Find board configuration */
-+ ar231x_find_config(ar2315_flash_limit());
-+ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac;
-+
-+ ar2315_init_gpio_leds();
-+ platform_device_register(&ar2315_wdt);
-+ platform_device_register(&ar2315_spiflash);
-+ ar231x_add_ethernet(0, AR2315_ENET0, "eth0_mii", AR2315_ENET0_MII,
-+ AR2315_IRQ_ENET0_INTRS, &ar2315_eth_data);
-+ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS);
-+
-+ return 0;
-+}
-+
-+static void
-+ar2315_restart(char *command)
-+{
-+ void (*mips_reset_vec)(void) = (void *)0xbfc00000;
-+
-+ local_irq_disable();
-+
-+ /* try reset the system via reset control */
-+ ar231x_write_reg(AR2315_COLD_RESET, AR2317_RESET_SYSTEM);
-+
-+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits
-+ * a workaround. Give it some time to attempt a gpio based hardware
-+ * reset (atheros reference design workaround) */
-+ gpio_request_one(AR2315_RESET_GPIO, GPIOF_OUT_INIT_LOW, "Reset");
-+ mdelay(100);
-+
-+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
-+ * workaround. Attempt to jump to the mips reset location -
-+ * the boot loader itself might be able to recover the system */
-+ mips_reset_vec();
-+}
-+
-+/*
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
-+ * to determine the predevisor value.
-+ */
-+static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
-+static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 };
-+
-+static unsigned int __init
-+ar2315_sys_clk(unsigned int clock_ctl)
-+{
-+ unsigned int pllc_ctrl, cpu_div;
-+ unsigned int pllc_out, refdiv, fdiv, divby2;
-+ unsigned int clk_div;
-+
-+ pllc_ctrl = ar231x_read_reg(AR2315_PLLC_CTL);
-+ refdiv = (pllc_ctrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S;
-+ refdiv = clockctl1_predivide_table[refdiv];
-+ fdiv = (pllc_ctrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S;
-+ divby2 = (pllc_ctrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S;
-+ divby2 += 1;
-+ pllc_out = (40000000/refdiv)*(2*divby2)*fdiv;
-+
-+ /* clkm input selected */
-+ switch (clock_ctl & CPUCLK_CLK_SEL_M) {
-+ case 0:
-+ case 1:
-+ clk_div = pllc_divide_table[(pllc_ctrl & PLLC_CLKM_DIV_M) >>
-+ PLLC_CLKM_DIV_S];
-+ break;
-+ case 2:
-+ clk_div = pllc_divide_table[(pllc_ctrl & PLLC_CLKC_DIV_M) >>
-+ PLLC_CLKC_DIV_S];
-+ break;
-+ default:
-+ pllc_out = 40000000;
-+ clk_div = 1;
-+ break;
-+ }
-+
-+ cpu_div = (clock_ctl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S;
-+ cpu_div = cpu_div * 2 ?: 1;
-+
-+ return pllc_out / (clk_div * cpu_div);
-+}
-+
-+static inline unsigned int
-+ar2315_cpu_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK));
-+}
-+
-+static inline unsigned int
-+ar2315_apb_frequency(void)
-+{
-+ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK));
-+}
-+
-+void __init
-+ar2315_time_init(void)
-+{
-+ if (!is_2315())
-+ return;
-+
-+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
-+}
-+
-+void __init
-+ar2315_prom_init(void)
-+{
-+ u32 memsize, memcfg, devid;
-+
-+ if (!is_2315())
-+ return;
-+
-+ memcfg = ar231x_read_reg(AR2315_MEM_CFG);
-+ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S);
-+ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S);
-+ memsize <<= 3;
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
-+
-+ /* Detect the hardware based on the device ID */
-+ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP;
-+ switch (devid) {
-+ case 0x91: /* Need to check */
-+ ar231x_devtype = DEV_TYPE_AR2318;
-+ break;
-+ case 0x90:
-+ ar231x_devtype = DEV_TYPE_AR2317;
-+ break;
-+ case 0x87:
-+ ar231x_devtype = DEV_TYPE_AR2316;
-+ break;
-+ case 0x86:
-+ default:
-+ ar231x_devtype = DEV_TYPE_AR2315;
-+ break;
-+ }
-+ ar231x_board.devid = devid;
-+}
-+
-+void __init
-+ar2315_plat_setup(void)
-+{
-+ u32 config;
-+
-+ if (!is_2315())
-+ return;
-+
-+ /* Clear any lingering AHB errors */
-+ config = read_c0_config();
-+ write_c0_config(config & ~0x3);
-+ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET);
-+ ar231x_read_reg(AR2315_AHB_ERR1);
-+ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION);
-+
-+ _machine_restart = ar2315_restart;
-+ ar231x_serial_setup(AR2315_UART0, AR2315_MISC_IRQ_UART0,
-+ ar2315_apb_frequency());
-+}
---- /dev/null
-+++ b/arch/mips/ar231x/ar2315.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR2315_H
-+#define __AR2315_H
-+
-+#ifdef CONFIG_SOC_AR2315
-+
-+void ar2315_irq_init(void);
-+int ar2315_init_devices(void);
-+void ar2315_prom_init(void);
-+void ar2315_plat_setup(void);
-+void ar2315_time_init(void);
-+
-+#else
-+
-+static inline void ar2315_irq_init(void)
-+{
-+}
-+
-+static inline int ar2315_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar2315_prom_init(void)
-+{
-+}
-+
-+static inline void ar2315_plat_setup(void)
-+{
-+}
-+
-+static inline void ar2315_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/ar5312.h
-@@ -0,0 +1,37 @@
-+#ifndef __AR5312_H
-+#define __AR5312_H
-+
-+#ifdef CONFIG_SOC_AR5312
-+
-+void ar5312_irq_init(void);
-+int ar5312_init_devices(void);
-+void ar5312_prom_init(void);
-+void ar5312_plat_setup(void);
-+void ar5312_time_init(void);
-+
-+#else
-+
-+static inline void ar5312_irq_init(void)
-+{
-+}
-+
-+static inline int ar5312_init_devices(void)
-+{
-+ return 0;
-+}
-+
-+static inline void ar5312_prom_init(void)
-+{
-+}
-+
-+static inline void ar5312_plat_setup(void)
-+{
-+}
-+
-+static inline void ar5312_time_init(void)
-+{
-+}
-+
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/include/asm/mach-ar231x/ar231x.h
-@@ -0,0 +1,38 @@
-+#ifndef __ASM_MACH_AR231X_H
-+#define __ASM_MACH_AR231X_H
-+
-+#include <linux/types.h>
-+#include <linux/io.h>
-+
-+#define AR231X_MISC_IRQ_BASE 0x20
-+#define AR231X_GPIO_IRQ_BASE 0x30
-+
-+/* Software's idea of interrupts handled by "CPU Interrupt Controller" */
-+#define AR231X_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE+7) /* C0_CAUSE: 0x8000 */
-+
-+static inline u32
-+ar231x_read_reg(u32 reg)
-+{
-+ return __raw_readl((void __iomem *)KSEG1ADDR(reg));
-+}
-+
-+static inline void
-+ar231x_write_reg(u32 reg, u32 val)
-+{
-+ __raw_writel(val, (void __iomem *)KSEG1ADDR(reg));
-+}
-+
-+static inline u32
-+ar231x_mask_reg(u32 reg, u32 mask, u32 val)
-+{
-+ u32 ret;
-+
-+ ret = ar231x_read_reg(reg);
-+ ret &= ~mask;
-+ ret |= val;
-+ ar231x_write_reg(reg, ret);
-+
-+ return ret;
-+}
-+
-+#endif /* __ASM_MACH_AR231X_H */
---- /dev/null
-+++ b/arch/mips/ar231x/devices.h
-@@ -0,0 +1,39 @@
-+#ifndef __AR231X_DEVICES_H
-+#define __AR231X_DEVICES_H
-+
-+enum {
-+ /* handled by ar5312.c */
-+ DEV_TYPE_AR2312,
-+ DEV_TYPE_AR2313,
-+ DEV_TYPE_AR5312,
-+
-+ /* handled by ar2315.c */
-+ DEV_TYPE_AR2315,
-+ DEV_TYPE_AR2316,
-+ DEV_TYPE_AR2317,
-+ DEV_TYPE_AR2318,
-+
-+ DEV_TYPE_UNKNOWN
-+};
-+
-+extern int ar231x_devtype;
-+extern struct ar231x_board_config ar231x_board;
-+extern asmlinkage void (*ar231x_irq_dispatch)(void);
-+
-+int ar231x_find_config(u8 *flash_limit);
-+void ar231x_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
-+int ar231x_add_wmac(int nr, u32 base, int irq);
-+int ar231x_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base,
-+ int irq, void *pdata);
-+
-+static inline bool is_2315(void)
-+{
-+ return (current_cpu_data.cputype == CPU_4KEC);
-+}
-+
-+static inline bool is_5312(void)
-+{
-+ return !is_2315();
-+}
-+
-+#endif
---- /dev/null
-+++ b/arch/mips/ar231x/devices.c
-@@ -0,0 +1,181 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_8250.h>
-+#include <linux/platform_device.h>
-+#include <asm/bootinfo.h>
-+
-+#include <ar231x_platform.h>
-+#include <ar231x.h>
-+#include "devices.h"
-+#include "ar5312.h"
-+#include "ar2315.h"
-+
-+struct ar231x_board_config ar231x_board;
-+int ar231x_devtype = DEV_TYPE_UNKNOWN;
-+
-+static struct resource ar231x_eth0_res[] = {
-+ {
-+ .name = "eth0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth0_mii",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_eth1_res[] = {
-+ {
-+ .name = "eth1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth1_mii",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "eth1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device ar231x_eth[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth0_res)
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-eth",
-+ .resource = ar231x_eth1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_eth1_res)
-+ }
-+};
-+
-+static struct resource ar231x_wmac0_res[] = {
-+ {
-+ .name = "wmac0_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac0_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct resource ar231x_wmac1_res[] = {
-+ {
-+ .name = "wmac1_membase",
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "wmac1_irq",
-+ .flags = IORESOURCE_IRQ,
-+ }
-+};
-+
-+static struct platform_device ar231x_wmac[] = {
-+ {
-+ .id = 0,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac0_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac0_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+ {
-+ .id = 1,
-+ .name = "ar231x-wmac",
-+ .resource = ar231x_wmac1_res,
-+ .num_resources = ARRAY_SIZE(ar231x_wmac1_res),
-+ .dev.platform_data = &ar231x_board,
-+ },
-+};
-+
-+static const char * const devtype_strings[] = {
-+ [DEV_TYPE_AR5312] = "Atheros AR5312",
-+ [DEV_TYPE_AR2312] = "Atheros AR2312",
-+ [DEV_TYPE_AR2313] = "Atheros AR2313",
-+ [DEV_TYPE_AR2315] = "Atheros AR2315",
-+ [DEV_TYPE_AR2316] = "Atheros AR2316",
-+ [DEV_TYPE_AR2317] = "Atheros AR2317",
-+ [DEV_TYPE_AR2318] = "Atheros AR2318",
-+ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)",
-+};
-+
-+const char *get_system_type(void)
-+{
-+ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) ||
-+ !devtype_strings[ar231x_devtype])
-+ return devtype_strings[DEV_TYPE_UNKNOWN];
-+ return devtype_strings[ar231x_devtype];
-+}
-+
-+int __init
-+ar231x_add_ethernet(int nr, u32 base, const char *mii_name, u32 mii_base,
-+ int irq, void *pdata)
-+{
-+ struct resource *res;
-+
-+ ar231x_eth[nr].dev.platform_data = pdata;
-+ res = &ar231x_eth[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x2000 - 1;
-+ res++;
-+ res->name = mii_name;
-+ res->start = mii_base;
-+ res->end = mii_base + 8 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_eth[nr]);
-+}
-+
-+void __init
-+ar231x_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
-+{
-+ struct uart_port s;
-+
-+ memset(&s, 0, sizeof(s));
-+
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP;
-+ s.iotype = UPIO_MEM32;
-+ s.irq = irq;
-+ s.regshift = 2;
-+ s.mapbase = mapbase;
-+ s.uartclk = uartclk;
-+
-+ early_serial_setup(&s);
-+}
-+
-+int __init
-+ar231x_add_wmac(int nr, u32 base, int irq)
-+{
-+ struct resource *res;
-+
-+ ar231x_wmac[nr].dev.platform_data = &ar231x_board;
-+ res = &ar231x_wmac[nr].resource[0];
-+ res->start = base;
-+ res->end = base + 0x10000 - 1;
-+ res++;
-+ res->start = irq;
-+ res->end = irq;
-+ return platform_device_register(&ar231x_wmac[nr]);
-+}
-+
-+static int __init ar231x_register_devices(void)
-+{
-+ ar5312_init_devices();
-+ ar2315_init_devices();
-+
-+ return 0;
-+}
-+
-+device_initcall(ar231x_register_devices);