-int board_phy_config(struct phy_device *phydev)
-{
- /* board specific timings for GMAC */
- if (has_gmac()) {
- /* rx data delay */
- ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW,
- 0x2222);
- /* tx data delay */
- ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW,
- 0x2222);
- /* rx/tx clock delay */
- ksz9021_phy_extended_write(phydev,
- MII_KSZ9021_EXT_RGMII_CLOCK_SKEW,
- 0xf2f4);
- }
-
- /* always run the PHY's config routine */
- if (phydev->drv->config)
- return phydev->drv->config(phydev);
-
- return 0;
-}
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-
-#ifdef CONFIG_MACB
- if (has_emac())
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
- if (has_gmac())
- rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC, 0x00);
-#endif
-#ifdef CONFIG_USB_GADGET_ATMEL_USBA
- usba_udc_probe(&pdata);
-#ifdef CONFIG_USB_ETH_RNDIS
- usb_eth_initialize(bis);
-#endif
-#endif
-
- return rc;
-}
-
-#ifdef CONFIG_GENERIC_ATMEL_MCI
-int board_mmc_init(bd_t *bis)
-{
- int rc = 0;
-
- rc = atmel_mci_init((void *)ATMEL_BASE_MCI0);
-
- return rc;
-}
-#endif
-
-/* SPI chip select control */
-#ifdef CONFIG_ATMEL_SPI
-#include <spi.h>
-
-#ifndef CONFIG_DM_SPI
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs < 4;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- switch (slave->cs) {
- case 0:
- at91_set_pio_output(AT91_PIO_PORTD, 13, 0);
- case 1:
- at91_set_pio_output(AT91_PIO_PORTD, 14, 0);
- case 2:
- at91_set_pio_output(AT91_PIO_PORTD, 15, 0);
- case 3:
- at91_set_pio_output(AT91_PIO_PORTD, 16, 0);
- default:
- break;
- }
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- switch (slave->cs) {
- case 0:
- at91_set_pio_output(AT91_PIO_PORTD, 13, 1);
- case 1:
- at91_set_pio_output(AT91_PIO_PORTD, 14, 1);
- case 2:
- at91_set_pio_output(AT91_PIO_PORTD, 15, 1);
- case 3:
- at91_set_pio_output(AT91_PIO_PORTD, 16, 1);
- default:
- break;
- }
-}
-#endif
-#endif /* CONFIG_ATMEL_SPI */
-