+diff -Nur linux-2.6.24.2/include/linux/atmbr2684.h linux-2.6.24.2-copy/include/linux/atmbr2684.h
+--- linux-2.6.24.2/include/linux/atmbr2684.h 2008-02-11 05:51:11.000000000 +0000
++++ linux-2.6.24.2-copy/include/linux/atmbr2684.h 2008-03-27 01:08:42.000000000 +0000
+@@ -14,6 +14,9 @@
+ #define BR2684_MEDIA_FDDI (3)
+ #define BR2684_MEDIA_802_6 (4) /* 802.6 */
+
++ /* used only at device creation: */
++#define BR2684_FLAG_ROUTED (1<<16) /* payload is routed, not bridged */
++
+ /*
+ * Is there FCS inbound on this VC? This currently isn't supported.
+ */
+@@ -36,15 +39,22 @@
+ #define BR2684_ENCAPS_AUTODETECT (2) /* Unsuported */
+
+ /*
++ * Is this VC bridged or routed?
++ */
++
++#define BR2684_PAYLOAD_ROUTED (0)
++#define BR2684_PAYLOAD_BRIDGED (1)
++
++/*
+ * This is for the ATM_NEWBACKENDIF call - these are like socket families:
+ * the first element of the structure is the backend number and the rest
+ * is per-backend specific
+ */
+ struct atm_newif_br2684 {
+- atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
+- int media; /* BR2684_MEDIA_* */
+- char ifname[IFNAMSIZ];
+- int mtu;
++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
++ int media; /* BR2684_MEDIA_*, flags in upper bits */
++ char ifname[IFNAMSIZ];
++ int mtu;
+ };
+
+ /*
+@@ -55,10 +65,10 @@
+ #define BR2684_FIND_BYNUM (1)
+ #define BR2684_FIND_BYIFNAME (2)
+ struct br2684_if_spec {
+- int method; /* BR2684_FIND_* */
++ int method; /* BR2684_FIND_* */
+ union {
+- char ifname[IFNAMSIZ];
+- int devnum;
++ char ifname[IFNAMSIZ];
++ int devnum;
+ } spec;
+ };
+
+@@ -68,16 +78,16 @@
+ * is per-backend specific
+ */
+ struct atm_backend_br2684 {
+- atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
++ atm_backend_t backend_num; /* ATM_BACKEND_BR2684 */
+ struct br2684_if_spec ifspec;
+- int fcs_in; /* BR2684_FCSIN_* */
+- int fcs_out; /* BR2684_FCSOUT_* */
+- int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */
+- int encaps; /* BR2684_ENCAPS_* */
+- int has_vpiid; /* 1: use vpn_id - Unsupported */
+- __u8 vpn_id[7];
+- int send_padding; /* unsupported */
+- int min_size; /* we will pad smaller packets than this */
++ int fcs_in; /* BR2684_FCSIN_* */
++ int fcs_out; /* BR2684_FCSOUT_* */
++ int fcs_auto; /* 1: fcs_{in,out} disabled if no FCS rx'ed */
++ int encaps; /* BR2684_ENCAPS_* */
++ int has_vpiid; /* 1: use vpn_id - Unsupported */
++ __u8 vpn_id[7];
++ int send_padding; /* unsupported */
++ int min_size; /* we will pad smaller packets than this */
+ };
+
+ /*
+@@ -86,8 +96,8 @@
+ * efficient per-if in/out filters, this support will be removed
+ */
+ struct br2684_filter {
+- __be32 prefix; /* network byte order */
+- __be32 netmask; /* 0 = disable filter */
++ __be32 prefix; /* network byte order */
++ __be32 netmask; /* 0 = disable filter */
+ };
+
+ struct br2684_filter_set {
+@@ -95,7 +105,13 @@
+ struct br2684_filter filter;
+ };
+
++enum br2684_payload {
++ p_routed = BR2684_PAYLOAD_ROUTED,
++ p_bridged = BR2684_PAYLOAD_BRIDGED,
++};
++
+ #define BR2684_SETFILT _IOW( 'a', ATMIOC_BACKEND + 0, \
+ struct br2684_filter_set)
+
+ #endif /* _LINUX_ATMBR2684_H */
++
+diff -Nur linux-2.6.24.2/net/atm/br2684.c linux-2.6.24.2-copy/net/atm/br2684.c
+--- linux-2.6.24.2/net/atm/br2684.c 2008-02-11 05:51:11.000000000 +0000
++++ linux-2.6.24.2-copy/net/atm/br2684.c 2008-03-27 03:24:17.000000000 +0000
+@@ -1,8 +1,10 @@
+ /*
+-Experimental ethernet netdevice using ATM AAL5 as underlying carrier
+-(RFC1483 obsoleted by RFC2684) for Linux 2.4
+-Author: Marcell GAL, 2000, XDSL Ltd, Hungary
+-*/
++ * Ethernet netdevice using ATM AAL5 as underlying carrier
++ * (RFC1483 obsoleted by RFC2684) for Linux
++ *
++ * Authors: Marcell GAL, 2000, XDSL Ltd, Hungary
++ * Eric Kinzie, 2006-2007, US Naval Research Laboratory
++ */
+
+ #include <linux/module.h>
+ #include <linux/init.h>
+@@ -39,21 +41,35 @@
+ #define skb_debug(skb) do {} while (0)
+ #endif
+
++#define BR2684_ETHERTYPE_LEN 2
++#define BR2684_PAD_LEN 2
++
++#define LLC 0xaa, 0xaa, 0x03
++#define SNAP_BRIDGED 0x00, 0x80, 0xc2
++#define SNAP_ROUTED 0x00, 0x00, 0x00
++#define PID_ETHERNET 0x00, 0x07
++#define ETHERTYPE_IPV4 0x08, 0x00
++#define ETHERTYPE_IPV6 0x86, 0xdd
++#define PAD_BRIDGED 0x00, 0x00
++
++static unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
++static unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
+ static unsigned char llc_oui_pid_pad[] =
+- { 0xAA, 0xAA, 0x03, 0x00, 0x80, 0xC2, 0x00, 0x07, 0x00, 0x00 };
+-#define PADLEN (2)
++ { LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
++static unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
++static unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
+
+ enum br2684_encaps {
+- e_vc = BR2684_ENCAPS_VC,
++ e_vc = BR2684_ENCAPS_VC,
+ e_llc = BR2684_ENCAPS_LLC,
+ };
+
+ struct br2684_vcc {
+- struct atm_vcc *atmvcc;
++ struct atm_vcc *atmvcc;
+ struct net_device *device;
+- /* keep old push,pop functions for chaining */
+- void (*old_push)(struct atm_vcc *vcc,struct sk_buff *skb);
+- /* void (*old_pop)(struct atm_vcc *vcc,struct sk_buff *skb); */
++ /* keep old push, pop functions for chaining */
++ void (*old_push) (struct atm_vcc * vcc, struct sk_buff * skb);
++ /* void (*old_pop)(struct atm_vcc *vcc, struct sk_buff *skb); */
+ enum br2684_encaps encaps;
+ struct list_head brvccs;
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+@@ -66,9 +82,10 @@
+ struct net_device *net_dev;
+ struct list_head br2684_devs;
+ int number;
+- struct list_head brvccs; /* one device <=> one vcc (before xmas) */
++ struct list_head brvccs; /* one device <=> one vcc (before xmas) */
+ struct net_device_stats stats;
+ int mac_was_set;
++ enum br2684_payload payload;
+ };
+
+ /*
+@@ -84,7 +101,7 @@
+
+ static inline struct br2684_dev *BRPRIV(const struct net_device *net_dev)
+ {
+- return (struct br2684_dev *) net_dev->priv;
++ return (struct br2684_dev *)net_dev->priv;
+ }
+
+ static inline struct net_device *list_entry_brdev(const struct list_head *le)
+@@ -94,7 +111,7 @@
+
+ static inline struct br2684_vcc *BR2684_VCC(const struct atm_vcc *atmvcc)
+ {
+- return (struct br2684_vcc *) (atmvcc->user_back);
++ return (struct br2684_vcc *)(atmvcc->user_back);
+ }
+
+ static inline struct br2684_vcc *list_entry_brvcc(const struct list_head *le)
+@@ -132,10 +149,11 @@
+ * otherwise false
+ */
+ static int br2684_xmit_vcc(struct sk_buff *skb, struct br2684_dev *brdev,
+- struct br2684_vcc *brvcc)
++ struct br2684_vcc *brvcc)
+ {
+ struct atm_vcc *atmvcc;
+ int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
++
+ if (skb_headroom(skb) < minheadroom) {
+ struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
+ brvcc->copies_needed++;
+@@ -146,23 +164,48 @@
+ }
+ skb = skb2;
+ }
+- skb_push(skb, minheadroom);
+- if (brvcc->encaps == e_llc)
+- skb_copy_to_linear_data(skb, llc_oui_pid_pad, 10);
+- else
+- memset(skb->data, 0, 2);
++
++ if (brvcc->encaps == e_llc) {
++ if (brdev->payload == p_bridged) {
++ skb_push(skb, sizeof(llc_oui_pid_pad));
++ skb_copy_to_linear_data(skb, llc_oui_pid_pad,
++ sizeof(llc_oui_pid_pad));
++ } else if (brdev->payload == p_routed) {
++ unsigned short prot = ntohs(skb->protocol);
++
++ skb_push(skb, sizeof(llc_oui_ipv4));
++ switch (prot) {
++ case ETH_P_IP:
++ skb_copy_to_linear_data(skb, llc_oui_ipv4,
++ sizeof(llc_oui_ipv4));
++ break;
++ case ETH_P_IPV6:
++ skb_copy_to_linear_data(skb, llc_oui_ipv6,
++ sizeof(llc_oui_ipv6));
++ break;
++ default:
++ dev_kfree_skb(skb);
++ return 0;
++ }
++ }
++ } else {
++ skb_push(skb, 2);
++ if (brdev->payload == p_bridged)
++ memset(skb->data, 0, 2);
++ }
+ skb_debug(skb);
+
+ ATM_SKB(skb)->vcc = atmvcc = brvcc->atmvcc;
+ pr_debug("atm_skb(%p)->vcc(%p)->dev(%p)\n", skb, atmvcc, atmvcc->dev);
+ if (!atm_may_send(atmvcc, skb->truesize)) {
+- /* we free this here for now, because we cannot know in a higher
+- layer whether the skb point it supplied wasn't freed yet.
+- now, it always is.
+- */
++ /*
++ * We free this here for now, because we cannot know in a higher
++ * layer whether the skb pointer it supplied wasn't freed yet.
++ * Now, it always is.
++ */
+ dev_kfree_skb(skb);
+ return 0;
+- }
++ }
+ atomic_add(skb->truesize, &sk_atm(atmvcc)->sk_wmem_alloc);
+ ATM_SKB(skb)->atm_options = atmvcc->atm_options;
+ brdev->stats.tx_packets++;
+@@ -172,10 +215,9 @@
+ }
+
+ static inline struct br2684_vcc *pick_outgoing_vcc(struct sk_buff *skb,
+- struct br2684_dev *brdev)
++ struct br2684_dev *brdev)
+ {
+- return list_empty(&brdev->brvccs) ? NULL :
+- list_entry_brvcc(brdev->brvccs.next); /* 1 vcc/dev right now */
++ return list_empty(&brdev->brvccs) ? NULL : list_entry_brvcc(brdev->brvccs.next); /* 1 vcc/dev right now */
+ }
+
+ static int br2684_start_xmit(struct sk_buff *skb, struct net_device *dev)
+@@ -199,11 +241,10 @@
+ /*
+ * We should probably use netif_*_queue() here, but that
+ * involves added complication. We need to walk before
+- * we can run
++ * we can run.
++ *
++ * Don't free here! this pointer might be no longer valid!
+ */
+- /* don't free here! this pointer might be no longer valid!
+- dev_kfree_skb(skb);
+- */
+ brdev->stats.tx_errors++;
+ brdev->stats.tx_fifo_errors++;
+ }
+@@ -217,12 +258,11 @@
+ return &BRPRIV(dev)->stats;
+ }
+
+-
+ /*
+ * We remember when the MAC gets set, so we don't override it later with
+ * the ESI of the ATM card of the first VC
+ */
+-static int (*my_eth_mac_addr)(struct net_device *, void *);
++static int (*my_eth_mac_addr) (struct net_device *, void *);
+ static int br2684_mac_addr(struct net_device *dev, void *p)
+ {
+ int err = my_eth_mac_addr(dev, p);
+@@ -233,7 +273,7 @@
+
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+ /* this IOCTL is experimental. */
+-static int br2684_setfilt(struct atm_vcc *atmvcc, void __user *arg)
++static int br2684_setfilt(struct atm_vcc *atmvcc, void __user * arg)
+ {
+ struct br2684_vcc *brvcc;
+ struct br2684_filter_set fs;
+@@ -243,13 +283,12 @@
+ if (fs.ifspec.method != BR2684_FIND_BYNOTHING) {
+ /*
+ * This is really a per-vcc thing, but we can also search
+- * by device
++ * by device.
+ */
+ struct br2684_dev *brdev;
+ read_lock(&devs_lock);
+ brdev = BRPRIV(br2684_find_dev(&fs.ifspec));
+- if (brdev == NULL || list_empty(&brdev->brvccs) ||
+- brdev->brvccs.next != brdev->brvccs.prev) /* >1 VCC */
++ if (brdev == NULL || list_empty(&brdev->brvccs) || brdev->brvccs.next != brdev->brvccs.prev) /* >1 VCC */
+ brvcc = NULL;
+ else
+ brvcc = list_entry_brvcc(brdev->brvccs.next);
+@@ -267,15 +306,16 @@
+ packet_fails_filter(__be16 type, struct br2684_vcc *brvcc, struct sk_buff *skb)
+ {
+ if (brvcc->filter.netmask == 0)
+- return 0; /* no filter in place */
++ return 0; /* no filter in place */
+ if (type == htons(ETH_P_IP) &&
+- (((struct iphdr *) (skb->data))->daddr & brvcc->filter.
++ (((struct iphdr *)(skb->data))->daddr & brvcc->filter.
+ netmask) == brvcc->filter.prefix)
+ return 0;
+ if (type == htons(ETH_P_ARP))
+ return 0;
+- /* TODO: we should probably filter ARPs too.. don't want to have
+- * them returning values that don't make sense, or is that ok?
++ /*
++ * TODO: we should probably filter ARPs too.. don't want to have
++ * them returning values that don't make sense, or is that ok?
+ */
+ return 1; /* drop */
+ }
+@@ -299,7 +339,6 @@
+ struct br2684_vcc *brvcc = BR2684_VCC(atmvcc);
+ struct net_device *net_dev = brvcc->device;
+ struct br2684_dev *brdev = BRPRIV(net_dev);
+- int plen = sizeof(llc_oui_pid_pad) + ETH_HLEN;
+
+ pr_debug("br2684_push\n");
+
+@@ -320,35 +359,58 @@
+ atm_return(atmvcc, skb->truesize);
+ pr_debug("skb from brdev %p\n", brdev);
+ if (brvcc->encaps == e_llc) {
+- /* let us waste some time for checking the encapsulation.
+- Note, that only 7 char is checked so frames with a valid FCS
+- are also accepted (but FCS is not checked of course) */
+- if (memcmp(skb->data, llc_oui_pid_pad, 7)) {
++
++ if (skb->len > 7 && skb->data[7] == 0x01)
++ __skb_trim(skb, skb->len - 4);
++
++ /* accept packets that have "ipv[46]" in the snap header */
++ if ((skb->len >= (sizeof(llc_oui_ipv4)))
++ &&
++ (memcmp
++ (skb->data, llc_oui_ipv4,
++ sizeof(llc_oui_ipv4) - BR2684_ETHERTYPE_LEN) == 0)) {
++ if (memcmp
++ (skb->data + 6, ethertype_ipv6,
++ sizeof(ethertype_ipv6)) == 0)
++ skb->protocol = __constant_htons(ETH_P_IPV6);
++ else if (memcmp
++ (skb->data + 6, ethertype_ipv4,
++ sizeof(ethertype_ipv4)) == 0)
++ skb->protocol = __constant_htons(ETH_P_IP);
++ else {
++ brdev->stats.rx_errors++;
++ dev_kfree_skb(skb);
++ return;
++ }
++ skb_pull(skb, sizeof(llc_oui_ipv4));
++ skb_reset_network_header(skb);
++ skb->pkt_type = PACKET_HOST;
++ /*
++ * Let us waste some time for checking the encapsulation.
++ * Note, that only 7 char is checked so frames with a valid FCS
++ * are also accepted (but FCS is not checked of course).
++ */
++ } else if ((skb->len >= sizeof(llc_oui_pid_pad)) &&
++ (memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) {
++ skb_pull(skb, sizeof(llc_oui_pid_pad));
++ skb->protocol = eth_type_trans(skb, net_dev);
++ } else {
+ brdev->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ return;
+ }
+
+- /* Strip FCS if present */
+- if (skb->len > 7 && skb->data[7] == 0x01)
+- __skb_trim(skb, skb->len - 4);
+ } else {
+- plen = PADLEN + ETH_HLEN; /* pad, dstmac,srcmac, ethtype */
+ /* first 2 chars should be 0 */
+ if (*((u16 *) (skb->data)) != 0) {
+ brdev->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ return;
+ }
+- }
+- if (skb->len < plen) {
+- brdev->stats.rx_errors++;
+- dev_kfree_skb(skb); /* dev_ not needed? */
+- return;
++ skb_pull(skb, BR2684_PAD_LEN + ETH_HLEN); /* pad, dstmac, srcmac, ethtype */
++ skb->protocol = eth_type_trans(skb, net_dev);
+ }
+
+- skb_pull(skb, plen - ETH_HLEN);
+- skb->protocol = eth_type_trans(skb, net_dev);
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+ if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) {
+ brdev->stats.rx_dropped++;
+@@ -372,11 +434,12 @@
+ netif_rx(skb);
+ }
+
+-static int br2684_regvcc(struct atm_vcc *atmvcc, void __user *arg)
++/*
++ * Assign a vcc to a dev
++ * Note: we do not have explicit unassign, but look at _push()
++ */
++static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg)
+ {
+-/* assign a vcc to a dev
+-Note: we do not have explicit unassign, but look at _push()
+-*/
+ int err;
+ struct br2684_vcc *brvcc;
+ struct sk_buff *skb;
+@@ -395,7 +458,7 @@
+ net_dev = br2684_find_dev(&be.ifspec);
+ if (net_dev == NULL) {
+ printk(KERN_ERR
+- "br2684: tried to attach to non-existant device\n");
++ "br2684: tried to attach to non-existant device\n");
+ err = -ENXIO;
+ goto error;
+ }
+@@ -411,13 +474,15 @@
+ }
+ if (be.fcs_in != BR2684_FCSIN_NO || be.fcs_out != BR2684_FCSOUT_NO ||
+ be.fcs_auto || be.has_vpiid || be.send_padding || (be.encaps !=
+- BR2684_ENCAPS_VC && be.encaps != BR2684_ENCAPS_LLC) ||
+- be.min_size != 0) {
++ BR2684_ENCAPS_VC
++ && be.encaps !=
++ BR2684_ENCAPS_LLC)
++ || be.min_size != 0) {
+ err = -EINVAL;
+ goto error;
+ }
+- pr_debug("br2684_regvcc vcc=%p, encaps=%d, brvcc=%p\n", atmvcc, be.encaps,
+- brvcc);
++ pr_debug("br2684_regvcc vcc=%p, encaps=%d, brvcc=%p\n", atmvcc,
++ be.encaps, brvcc);
+ if (list_empty(&brdev->brvccs) && !brdev->mac_was_set) {
+ unsigned char *esi = atmvcc->dev->esi;
+ if (esi[0] | esi[1] | esi[2] | esi[3] | esi[4] | esi[5])
+@@ -430,7 +495,7 @@
+ brvcc->device = net_dev;
+ brvcc->atmvcc = atmvcc;
+ atmvcc->user_back = brvcc;
+- brvcc->encaps = (enum br2684_encaps) be.encaps;
++ brvcc->encaps = (enum br2684_encaps)be.encaps;
+ brvcc->old_push = atmvcc->push;
+ barrier();
+ atmvcc->push = br2684_push;
+@@ -461,7 +526,7 @@
+ }
+ __module_get(THIS_MODULE);
+ return 0;
+- error:
++ error:
+ write_unlock_irq(&devs_lock);
+ kfree(brvcc);
+ return err;
+@@ -482,25 +547,52 @@
+ INIT_LIST_HEAD(&brdev->brvccs);
+ }
+
+-static int br2684_create(void __user *arg)
++static void br2684_setup_routed(struct net_device *netdev)
++{
++ struct br2684_dev *brdev = BRPRIV(netdev);
++ brdev->net_dev = netdev;
++
++ netdev->hard_header_len = 0;
++ my_eth_mac_addr = netdev->set_mac_address;
++ netdev->set_mac_address = br2684_mac_addr;
++ netdev->hard_start_xmit = br2684_start_xmit;
++ netdev->get_stats = br2684_get_stats;
++ netdev->addr_len = 0;
++ netdev->mtu = 1500;
++ netdev->type = ARPHRD_PPP;
++ netdev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
++ netdev->tx_queue_len = 100;
++ INIT_LIST_HEAD(&brdev->brvccs);
++}
++
++static int br2684_create(void __user * arg)
+ {
+ int err;
+ struct net_device *netdev;
+ struct br2684_dev *brdev;
+ struct atm_newif_br2684 ni;
++ enum br2684_payload payload;
+
+ pr_debug("br2684_create\n");
+
+ if (copy_from_user(&ni, arg, sizeof ni)) {
+ return -EFAULT;
+ }
++
++ if (ni.media & BR2684_FLAG_ROUTED)
++ payload = p_routed;
++ else
++ payload = p_bridged;
++ ni.media &= 0xffff; /* strip flags */
++
+ if (ni.media != BR2684_MEDIA_ETHERNET || ni.mtu != 1500) {
+ return -EINVAL;
+ }
+
+ netdev = alloc_netdev(sizeof(struct br2684_dev),
+ ni.ifname[0] ? ni.ifname : "nas%d",
+- br2684_setup);
++ (payload == p_routed) ?
++ br2684_setup_routed : br2684_setup);
+ if (!netdev)
+ return -ENOMEM;
+
+@@ -516,6 +608,7 @@
+ }
+
+ write_lock_irq(&devs_lock);
++ brdev->payload = payload;
+ brdev->number = list_empty(&br2684_devs) ? 1 :
+ BRPRIV(list_entry_brdev(br2684_devs.prev))->number + 1;
+ list_add_tail(&brdev->br2684_devs, &br2684_devs);
+@@ -528,16 +621,16 @@
+ * -ENOIOCTLCMD for any unrecognized ioctl
+ */
+ static int br2684_ioctl(struct socket *sock, unsigned int cmd,
+- unsigned long arg)
++ unsigned long arg)
+ {
+ struct atm_vcc *atmvcc = ATM_SD(sock);
+ void __user *argp = (void __user *)arg;
++ atm_backend_t b;
+
+ int err;
+- switch(cmd) {
++ switch (cmd) {
+ case ATM_SETBACKEND:
+- case ATM_NEWBACKENDIF: {
+- atm_backend_t b;
++ case ATM_NEWBACKENDIF:
+ err = get_user(b, (atm_backend_t __user *) argp);
+ if (err)
+ return -EFAULT;
+@@ -549,7 +642,6 @@
+ return br2684_regvcc(atmvcc, argp);
+ else
+ return br2684_create(argp);
+- }
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+ case BR2684_SETFILT:
+ if (atmvcc->push != br2684_push)
+@@ -557,6 +649,7 @@
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ err = br2684_setfilt(atmvcc, argp);
++
+ return err;
+ #endif /* CONFIG_ATM_BR2684_IPFILTER */
+ }
+@@ -564,24 +657,25 @@
+ }
+
+ static struct atm_ioctl br2684_ioctl_ops = {
+- .owner = THIS_MODULE,
+- .ioctl = br2684_ioctl,
++ .owner = THIS_MODULE,
++ .ioctl = br2684_ioctl,
+ };
+
+-
+ #ifdef CONFIG_PROC_FS
+-static void *br2684_seq_start(struct seq_file *seq, loff_t *pos)
++static void *br2684_seq_start(struct seq_file *seq, loff_t * pos)
++ __acquires(devs_lock)
+ {
+ read_lock(&devs_lock);
+ return seq_list_start(&br2684_devs, *pos);
+ }
+
+-static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t *pos)
++static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t * pos)
+ {
+ return seq_list_next(v, &br2684_devs, pos);
+ }
+
+ static void br2684_seq_stop(struct seq_file *seq, void *v)
++ __releases(devs_lock)
+ {
+ read_unlock(&devs_lock);
+ }
+@@ -589,7 +683,7 @@
+ static int br2684_seq_show(struct seq_file *seq, void *v)
+ {
+ const struct br2684_dev *brdev = list_entry(v, struct br2684_dev,
+- br2684_devs);
++ br2684_devs);
+ const struct net_device *net_dev = brdev->net_dev;
+ const struct br2684_vcc *brvcc;
+ DECLARE_MAC_BUF(mac);
+@@ -601,21 +695,19 @@
+ brdev->mac_was_set ? "set" : "auto");
+
+ list_for_each_entry(brvcc, &brdev->brvccs, brvccs) {
+- seq_printf(seq, " vcc %d.%d.%d: encaps=%s"
+- ", failed copies %u/%u"
+- "\n", brvcc->atmvcc->dev->number,
+- brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
+- (brvcc->encaps == e_llc) ? "LLC" : "VC"
+- , brvcc->copies_failed
+- , brvcc->copies_needed
+- );
++ seq_printf(seq, " vcc %d.%d.%d: encaps=%s payload=%s"
++ ", failed copies %u/%u"
++ "\n", brvcc->atmvcc->dev->number,
++ brvcc->atmvcc->vpi, brvcc->atmvcc->vci,
++ (brvcc->encaps == e_llc) ? "LLC" : "VC",
++ (brdev->payload == p_bridged) ? "bridged" : "routed",
++ brvcc->copies_failed, brvcc->copies_needed);
+ #ifdef CONFIG_ATM_BR2684_IPFILTER
+ #define b1(var, byte) ((u8 *) &brvcc->filter.var)[byte]
+ #define bs(var) b1(var, 0), b1(var, 1), b1(var, 2), b1(var, 3)
+- if (brvcc->filter.netmask != 0)
+- seq_printf(seq, " filter=%d.%d.%d.%d/"
+- "%d.%d.%d.%d\n",
+- bs(prefix), bs(netmask));
++ if (brvcc->filter.netmask != 0)
++ seq_printf(seq, " filter=%d.%d.%d.%d/"
++ "%d.%d.%d.%d\n", bs(prefix), bs(netmask));
+ #undef bs
+ #undef b1
+ #endif /* CONFIG_ATM_BR2684_IPFILTER */
+@@ -625,9 +717,9 @@
+
+ static const struct seq_operations br2684_seq_ops = {
+ .start = br2684_seq_start,
+- .next = br2684_seq_next,
+- .stop = br2684_seq_stop,
+- .show = br2684_seq_show,
++ .next = br2684_seq_next,
++ .stop = br2684_seq_stop,
++ .show = br2684_seq_show,
+ };
+
+ static int br2684_proc_open(struct inode *inode, struct file *file)
+@@ -636,26 +728,28 @@
+ }
+
+ static const struct file_operations br2684_proc_ops = {
+- .owner = THIS_MODULE,
+- .open = br2684_proc_open,
+- .read = seq_read,
+- .llseek = seq_lseek,
++ .owner = THIS_MODULE,
++ .open = br2684_proc_open,
++ .read = seq_read,
++ .llseek = seq_lseek,
+ .release = seq_release,
+ };
+
+ extern struct proc_dir_entry *atm_proc_root; /* from proc.c */
+-#endif
++#endif /* CONFIG_PROC_FS */
+
+ static int __init br2684_init(void)
+ {
+ #ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *p;
++
+ if ((p = create_proc_entry("br2684", 0, atm_proc_root)) == NULL)
+- return -ENOMEM;
+- p->proc_fops = &br2684_proc_ops;
++ return -ENOMEM;
++ p->proc_fops = &br2684_proc_ops;
+ #endif
+- register_atm_ioctl(&br2684_ioctl_ops);
+- return 0;
++ register_atm_ioctl(&br2684_ioctl_ops);
++ return 0;
++
+ }
+
+ static void __exit br2684_exit(void)
+@@ -689,3 +783,4 @@
+ MODULE_AUTHOR("Marcell GAL");
+ MODULE_DESCRIPTION("RFC2684 bridged protocols over ATM/AAL5");
+ MODULE_LICENSE("GPL");
++