Coding Style cleanup

diff --git a/CHANGELOG b/CHANGELOG
index d7d73ebbd9541798f97d9f889ca07bf820224f55..c774dd0525eb4e58b450794d88bfd419978aa2f4 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
 Changes since U-Boot 1.1.4:
 ======================================================================
 

+* Coding Style cleanup
+

 * Write RTC seconds first to maintain settings integrity per
   Maxim/Dallas DS1306 data sheet.
   Patch by Alan J. Luse, 02 May 2006
 * Write RTC seconds first to maintain settings integrity per
   Maxim/Dallas DS1306 data sheet.
   Patch by Alan J. Luse, 02 May 2006

diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index a030b8287049bf40ac1f6833a331843a714169ce..0d865186ae0427427acb1025d2915ff4e87bf3ee 100644 (file)
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -1,6 +1,4 @@
 /*
 /*

- * -- Version 1.1 --
- *

  * (C) Copyright 2003-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2003-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *


@@ -13,9 +11,6 @@
  * (C) Copyright 2006
  * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de
  *
  * (C) Copyright 2006
  * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de
  *

- * History:
- *     1.1 - improved SM501 init to meet spec timing
- *

  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *


@@ -51,7 +46,7 @@
 
 #ifdef CONFIG_RTC_MPC5200
 #include <rtc.h>
 
 #ifdef CONFIG_RTC_MPC5200
 #include <rtc.h>

-#endif 
+#endif

 
 #ifdef CONFIG_PS2MULT
 void ps2mult_early_init(void);
 
 #ifdef CONFIG_PS2MULT
 void ps2mult_early_init(void);


@@ -375,7 +370,7 @@ ulong post_word_load (void)
 int board_early_init_r (void)
 {
 #ifdef CONFIG_RTC_MPC5200
 int board_early_init_r (void)
 {
 #ifdef CONFIG_RTC_MPC5200

-        struct rtc_time t;
+       struct rtc_time t;

 
        /* set to Wed Dec 31 19:00:00 1969 */
        t.tm_sec = t.tm_min = 0;
 
        /* set to Wed Dec 31 19:00:00 1969 */
        t.tm_sec = t.tm_min = 0;


@@ -384,7 +379,7 @@ int board_early_init_r (void)
        t.tm_mon = 12;
        t.tm_year = 1969;
        t.tm_wday = 3;
        t.tm_mon = 12;
        t.tm_year = 1969;
        t.tm_wday = 3;

-       
+

        rtc_set(&t);
 #endif /* CONFIG_RTC_MPC5200 */
 
        rtc_set(&t);
 #endif /* CONFIG_RTC_MPC5200 */
 


@@ -482,7 +477,7 @@ int last_stage_init (void)
        } else {
                puts ("VGA:   SMI501 (Voyager) with 8 MB\n");
        }
        } else {
                puts ("VGA:   SMI501 (Voyager) with 8 MB\n");
        }

-       /* restore origianl FB content  */
+       /* restore origianl FB content  */

        if (restore) {
                *(volatile u16 *)CFG_CS1_START = save;
                __asm__ volatile ("sync");
        if (restore) {
                *(volatile u16 *)CFG_CS1_START = save;
                __asm__ volatile ("sync");


@@ -493,8 +488,8 @@ int last_stage_init (void)
 
 #ifdef CONFIG_VIDEO_SM501
 
 
 #ifdef CONFIG_VIDEO_SM501
 

-#define DISPLAY_WIDTH   640
-#define DISPLAY_HEIGHT  480
+#define DISPLAY_WIDTH  640
+#define DISPLAY_HEIGHT 480

 
 #ifdef CONFIG_VIDEO_SM501_8BPP
 #error CONFIG_VIDEO_SM501_8BPP not supported.
 
 #ifdef CONFIG_VIDEO_SM501_8BPP
 #error CONFIG_VIDEO_SM501_8BPP not supported.


@@ -633,7 +628,7 @@ unsigned int board_video_init (void)
        } else {
            ret = SM501_MMIO_BASE;
        }
        } else {
            ret = SM501_MMIO_BASE;
        }

-       
+

        if (restore) {
                *(volatile u16 *)CFG_CS1_START = save;
                __asm__ volatile ("sync");
        if (restore) {
                *(volatile u16 *)CFG_CS1_START = save;
                __asm__ volatile ("sync");

diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index 1442b68df1a74edc18910ba75b90874532f3a6a3..6bbe4e6a5d2059cc68ca59ed7583d950354f3c9e 100644 (file)
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -27,7 +27,7 @@
 #include <common.h>
 #include <command.h>
 
 #include <common.h>
 #include <command.h>
 

-/* 
+/*

  * BC3450 specific commands
  */
 #if (CONFIG_COMMANDS & CFG_CMD_BSP)
  * BC3450 specific commands
  */
 #if (CONFIG_COMMANDS & CFG_CMD_BSP)


@@ -39,7 +39,7 @@
 # define dprintf(fmt,args...)
 #endif
 
 # define dprintf(fmt,args...)
 #endif
 

-/* 
+/*

  * Definitions for DS1620 chip
  */
 #define THERM_START_CONVERT    0xee
  * Definitions for DS1620 chip
  */
 #define THERM_START_CONVERT    0xee


@@ -57,8 +57,8 @@
 #define CFG_STANDALONE         0
 
 struct therm {
 #define CFG_STANDALONE         0
 
 struct therm {

-    int hi;
-    int lo;
+       int hi;
+       int lo;

 };
 
 /*
 };
 
 /*


@@ -124,36 +124,46 @@ struct therm {
  * Yet, the initialisation sequence is executed only the first
  * time the function is called.
  */
  * Yet, the initialisation sequence is executed only the first
  * time the function is called.
  */

-int sm501_gpio_init(void)
+int sm501_gpio_init (void)

 {
 {

-    static int init_done = 0;
+       static int init_done = 0;

 
 

-    if(init_done) {
+       if (init_done) {

 /*     dprintf("sm501_gpio_init: nothing to be done.\n"); */
 /*     dprintf("sm501_gpio_init: nothing to be done.\n"); */

-       return 1;
-    }
-
-    /* enable SM501 GPIO control (in both power modes) */
-    *(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE0_GATE) |= POWER_MODE_GATE_GPIO_PWM_I2C;
-    *(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE1_GATE) |= POWER_MODE_GATE_GPIO_PWM_I2C;
-
-    /* set up default O/Ps */
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~(DS1620_RES | DS1620_CLK);
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_DQ;
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &= ~(FP_DATA_TRI);
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |= (BUZZER | PWR_OFF);
-
-    /* configure directions for SM501 GPIO pins */
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_LOW) &= ~(0xFF << 24);
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_HIGH) &= ~(0x3F << 14);
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &= ~(DIP | DS1620_DQ);
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |= (DS1620_RES | DS1620_CLK);
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) &= ~DS1620_TLOW;
-    *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) |= (PWR_OFF | BUZZER | FP_DATA_TRI);
-
-    init_done = 1;
+               return 1;
+       }
+
+       /* enable SM501 GPIO control (in both power modes) */
+       *(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE0_GATE) |=
+               POWER_MODE_GATE_GPIO_PWM_I2C;
+       *(vu_long *) (SM501_MMIO_BASE + SM501_POWER_MODE1_GATE) |=
+               POWER_MODE_GATE_GPIO_PWM_I2C;
+
+       /* set up default O/Ps */
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
+               ~(DS1620_RES | DS1620_CLK);
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_DQ;
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
+               ~(FP_DATA_TRI);
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |=
+               (BUZZER | PWR_OFF);
+
+       /* configure directions for SM501 GPIO pins */
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_LOW) &= ~(0xFF << 24);
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_CTRL_HIGH) &=
+               ~(0x3F << 14);
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &=
+               ~(DIP | DS1620_DQ);
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |=
+               (DS1620_RES | DS1620_CLK);
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) &=
+               ~DS1620_TLOW;
+       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_HIGH) |=
+               (PWR_OFF | BUZZER | FP_DATA_TRI);
+
+       init_done = 1;

 /*  dprintf("sm501_gpio_init: done.\n"); */
 /*  dprintf("sm501_gpio_init: done.\n"); */

-    return 0;
+       return 0;

 }
 
 
 }
 
 


@@ -163,347 +173,358 @@ int sm501_gpio_init(void)
  * read and prints the dip switch
  * and/or external config inputs (4bits) 0...0x0F
  */
  * read and prints the dip switch
  * and/or external config inputs (4bits) 0...0x0F
  */

-int cmd_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])

 {
 {

-    vu_long rc = 0;
+       vu_long rc = 0;

 
 

-    sm501_gpio_init();
+       sm501_gpio_init ();

 
 

-    /* read dip switch */
-    rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
-    rc = ~rc;
-    rc &= DIP;
-    rc = (int)(rc >> 24);
+       /* read dip switch */
+       rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
+       rc = ~rc;
+       rc &= DIP;
+       rc = (int) (rc >> 24);

 
 

-    /* plausibility check */
-    if (rc > 0x0F)
-       return -1;
+       /* plausibility check */
+       if (rc > 0x0F)
+               return -1;

 
 

-    printf ("0x%x\n", rc);
-    return 0;
+       printf ("0x%x\n", rc);
+       return 0;

 }
 
 }
 

-U_BOOT_CMD(
-       dip ,   1,      1,      cmd_dip,
-       "dip     - read dip switch and config inputs\n",
-       "\n"
-       "     - prints the state of the dip switch and/or\n"
-       "       external configuration inputs as hex value.\n"
-       "     - \"Config 1\" is the LSB\n"
-    );
+U_BOOT_CMD (dip, 1, 1, cmd_dip,
+           "dip     - read dip switch and config inputs\n",
+           "\n"
+           "     - prints the state of the dip switch and/or\n"
+           "       external configuration inputs as hex value.\n"
+           "     - \"Config 1\" is the LSB\n");

 
 
 /*
  * buz - turns Buzzer on/off
  */
 #ifdef CONFIG_BC3450_BUZZER
 
 
 /*
  * buz - turns Buzzer on/off
  */
 #ifdef CONFIG_BC3450_BUZZER

-static int cmd_buz (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])

 {
 {

-    if (argc != 2) {
-       printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
-       return 1;
-    }
+       if (argc != 2) {
+               printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
+               return 1;
+       }

 
 

-    sm501_gpio_init();
+       sm501_gpio_init ();

 
 

-    if (strncmp (argv[1], "on", 2) == 0) {
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &= ~(BUZZER);
-       return 0;
-    }
-    else if (strncmp (argv[1], "off", 3) == 0) {
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |= BUZZER;
-       return 0;
-    }
-    printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
-    return 1;
+       if (strncmp (argv[1], "on", 2) == 0) {
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
+                       ~(BUZZER);
+               return 0;
+       } else if (strncmp (argv[1], "off", 3) == 0) {
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) |=
+                       BUZZER;
+               return 0;
+       }
+       printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
+       return 1;

 }
 
 }
 

-U_BOOT_CMD(
-       buz ,   2,      1,      cmd_buz,
-       "buz     - turns buzzer on/off\n",
-       "\n"
-       "buz <on/off>\n"
-       "     - turns the buzzer on or off\n"
-    );
+U_BOOT_CMD (buz, 2, 1, cmd_buz,
+           "buz     - turns buzzer on/off\n",
+           "\n" "buz <on/off>\n" "     - turns the buzzer on or off\n");

 #endif /* CONFIG_BC3450_BUZZER */
 
 
 /*
  * fp - front panel commands
  */
 #endif /* CONFIG_BC3450_BUZZER */
 
 
 /*
  * fp - front panel commands
  */

-static int cmd_fp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int cmd_fp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])

 {
 {

-    sm501_gpio_init();
-
-    if (strncmp (argv[1], "on", 2) == 0) {
-       /* turn on VDD first */
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_VDDEN;
-       udelay(1000);
-       /* then put data on */
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_DATA;
-       /* wait some time and enable backlight */
-       udelay(1000);
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_BIAS;
-       udelay(1000);
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_FPEN;
-       return 0;
-    }
-    else if (strncmp (argv[1], "off", 3) == 0) {
-       /* turn off the backlight first */
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_FPEN;
-       udelay(1000);
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_BIAS;
-       udelay(200000);
-       /* wait some time, then remove data */
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_DATA;
-       udelay(1000);
-       /* and remove VDD last */
-       *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_VDDEN;
-       return 0;
-    }
-    else if (strncmp (argv[1], "bl", 2) == 0) {
-       /* turn on/off backlight only */
-       if (strncmp (argv[2], "on", 2) == 0) {
-           *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_BIAS;
-           udelay(1000);
-           *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_FPEN;
-           return 0;
-       }
-       else if (strncmp (argv[2], "off", 3) == 0) {
-           *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_FPEN;
-           udelay(1000);
-           *(vu_long *)(SM501_MMIO_BASE + SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_BIAS;
-           return 0;
+       sm501_gpio_init ();
+
+       if (strncmp (argv[1], "on", 2) == 0) {
+               /* turn on VDD first */
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_VDDEN;
+               udelay (1000);
+               /* then put data on */
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_DATA;
+               /* wait some time and enable backlight */
+               udelay (1000);
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_BIAS;
+               udelay (1000);
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) |= SM501_PDC_FPEN;
+               return 0;
+       } else if (strncmp (argv[1], "off", 3) == 0) {
+               /* turn off the backlight first */
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_FPEN;
+               udelay (1000);
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_BIAS;
+               udelay (200000);
+               /* wait some time, then remove data */
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) &= ~SM501_PDC_DATA;
+               udelay (1000);
+               /* and remove VDD last */
+               *(vu_long *) (SM501_MMIO_BASE +
+                             SM501_PANEL_DISPLAY_CONTROL) &=
+                       ~SM501_PDC_VDDEN;
+               return 0;
+       } else if (strncmp (argv[1], "bl", 2) == 0) {
+               /* turn on/off backlight only */
+               if (strncmp (argv[2], "on", 2) == 0) {
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_PANEL_DISPLAY_CONTROL) |=
+                               SM501_PDC_BIAS;
+                       udelay (1000);
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_PANEL_DISPLAY_CONTROL) |=
+                               SM501_PDC_FPEN;
+                       return 0;
+               } else if (strncmp (argv[2], "off", 3) == 0) {
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_PANEL_DISPLAY_CONTROL) &=
+                               ~SM501_PDC_FPEN;
+                       udelay (1000);
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_PANEL_DISPLAY_CONTROL) &=
+                               ~SM501_PDC_BIAS;
+                       return 0;
+               }

        }
        }

-    }

 #ifdef CONFIG_BC3450_CRT
 #ifdef CONFIG_BC3450_CRT

-    else if (strncmp (argv[1], "crt", 3) == 0) {
-       /* enables/disables the crt output (debug only) */
-       if(strncmp (argv[2], "on", 2) == 0) {
-           *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) |= 
-               (SM501_CDC_TE | SM501_CDC_E);
-           *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) &= 
-               ~SM501_CDC_SEL;
-           return 0;
-       }
-       else if (strncmp (argv[2], "off", 3) == 0) {
-           *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) &= 
-               ~(SM501_CDC_TE | SM501_CDC_E);
-           *(vu_long *)(SM501_MMIO_BASE + SM501_CRT_DISPLAY_CONTROL) |= 
-               SM501_CDC_SEL;
-           return 0;
+       else if (strncmp (argv[1], "crt", 3) == 0) {
+               /* enables/disables the crt output (debug only) */
+               if (strncmp (argv[2], "on", 2) == 0) {
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_CRT_DISPLAY_CONTROL) |=
+                               (SM501_CDC_TE | SM501_CDC_E);
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_CRT_DISPLAY_CONTROL) &=
+                               ~SM501_CDC_SEL;
+                       return 0;
+               } else if (strncmp (argv[2], "off", 3) == 0) {
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_CRT_DISPLAY_CONTROL) &=
+                               ~(SM501_CDC_TE | SM501_CDC_E);
+                       *(vu_long *) (SM501_MMIO_BASE +
+                                     SM501_CRT_DISPLAY_CONTROL) |=
+                               SM501_CDC_SEL;
+                       return 0;
+               }

        }
        }

-    }

 #endif /* CONFIG_BC3450_CRT */
 #endif /* CONFIG_BC3450_CRT */

-    printf("Usage:%s\n", cmdtp->help);
-    return 1;
+       printf ("Usage:%s\n", cmdtp->help);
+       return 1;

 }
 
 }
 

-U_BOOT_CMD(
-       fp ,    3,      1,      cmd_fp,
-       "fp      - front panes access functions\n",
-       "\n"
-       "fp bl <on/off>\n"
-       "     - turns the CCFL backlight of the display on/off\n"
-       "fp <on/off>\n"
-       "     - turns the whole display on/off\n"
+U_BOOT_CMD (fp, 3, 1, cmd_fp,
+           "fp      - front panes access functions\n",
+           "\n"
+           "fp bl <on/off>\n"
+           "     - turns the CCFL backlight of the display on/off\n"
+           "fp <on/off>\n" "     - turns the whole display on/off\n"

 #ifdef CONFIG_BC3450_CRT
 #ifdef CONFIG_BC3450_CRT

-       "fp crt <on/off>\n"
-       "     - enables/disables the crt output (debug only)\n"
+           "fp crt <on/off>\n"
+           "     - enables/disables the crt output (debug only)\n"

 #endif /* CONFIG_BC3450_CRT */
 #endif /* CONFIG_BC3450_CRT */

-    );
+       );

 
 
 /*
  * temp - DS1620 thermometer
  */
 /* GERSYS BC3450 specific functions */
 
 
 /*
  * temp - DS1620 thermometer
  */
 /* GERSYS BC3450 specific functions */

-static inline void bc_ds1620_set_clk(int clk)
+static inline void bc_ds1620_set_clk (int clk)

 {
 {

-    if(clk)
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_CLK;
-    else
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_CLK;
+       if (clk)
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |=
+                       DS1620_CLK;
+       else
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
+                       ~DS1620_CLK;

 }
 
 }
 

-static inline void bc_ds1620_set_data(int dat)
+static inline void bc_ds1620_set_data (int dat)

 {
 {

-    if(dat)
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_DQ;
-    else
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_DQ;
+       if (dat)
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |=
+                       DS1620_DQ;
+       else
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &=
+                       ~DS1620_DQ;

 }
 
 }
 

-static inline int bc_ds1620_get_data(void)
+static inline int bc_ds1620_get_data (void)

 {
 {

-    vu_long rc;
-    rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
-    rc &= DS1620_DQ;
-    if(rc != 0)
-       rc = 1;
-    return (int)rc;
+       vu_long rc;
+
+       rc = *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW);
+       rc &= DS1620_DQ;
+       if (rc != 0)
+               rc = 1;
+       return (int) rc;

 }
 
 }
 

-static inline void bc_ds1620_set_data_dir(int dir)
+static inline void bc_ds1620_set_data_dir (int dir)

 {
 {

-    if(dir) /* in */
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &= ~DS1620_DQ;
-    else /* out */
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |= DS1620_DQ;
+       if (dir)                /* in */
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) &= ~DS1620_DQ;
+       else                    /* out */
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_DIR_LOW) |= DS1620_DQ;

 }
 
 }
 

-static inline void bc_ds1620_set_reset(int res)
+static inline void bc_ds1620_set_reset (int res)

 {
 {

-    if(res)
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_RES;
-    else
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_RES;
+       if (res)
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) |= DS1620_RES;
+       else
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_LOW) &= ~DS1620_RES;

 }
 
 /* hardware independent functions */
 }
 
 /* hardware independent functions */

-static void ds1620_send_bits(int nr, int value)
+static void ds1620_send_bits (int nr, int value)

 {
 {

-    int i;
-    
-    for (i = 0; i < nr; i++) {
-       bc_ds1620_set_data(value & 1);
-       bc_ds1620_set_clk(0);
-       udelay(1);
-       bc_ds1620_set_clk(1);
-       udelay(1);
-       
-       value >>= 1;
-    }
+       int i;
+
+       for (i = 0; i < nr; i++) {
+               bc_ds1620_set_data (value & 1);
+               bc_ds1620_set_clk (0);
+               udelay (1);
+               bc_ds1620_set_clk (1);
+               udelay (1);
+
+               value >>= 1;
+       }

 }
 
 }
 

-static unsigned int ds1620_recv_bits(int nr)
+static unsigned int ds1620_recv_bits (int nr)

 {
 {

-    unsigned int value = 0, mask = 1;
-    int i;
+       unsigned int value = 0, mask = 1;
+       int i;

 
 

-    bc_ds1620_set_data(0);
+       bc_ds1620_set_data (0);

 
 

-    for (i = 0; i < nr; i++) {
-       bc_ds1620_set_clk(0);
-       udelay(1);
+       for (i = 0; i < nr; i++) {
+               bc_ds1620_set_clk (0);
+               udelay (1);

 
 

-       if (bc_ds1620_get_data())
-           value |= mask;
+               if (bc_ds1620_get_data ())
+                       value |= mask;

 
 

-       mask <<= 1;
+               mask <<= 1;

 
 

-       bc_ds1620_set_clk(1);
-       udelay(1);
-    }
+               bc_ds1620_set_clk (1);
+               udelay (1);
+       }

 
 

-    return value;
+       return value;

 }
 
 }
 

-static void ds1620_out(int cmd, int bits, int value)
+static void ds1620_out (int cmd, int bits, int value)

 {
 {

-    bc_ds1620_set_clk(1);
-    bc_ds1620_set_data_dir(0);
+       bc_ds1620_set_clk (1);
+       bc_ds1620_set_data_dir (0);

 
 

-    bc_ds1620_set_reset(0);
-    udelay(1);
-    bc_ds1620_set_reset(1);
+       bc_ds1620_set_reset (0);
+       udelay (1);
+       bc_ds1620_set_reset (1);

 
 

-    udelay(1);
+       udelay (1);

 
 

-    ds1620_send_bits(8, cmd);
-    if (bits)
-       ds1620_send_bits(bits, value);
+       ds1620_send_bits (8, cmd);
+       if (bits)
+               ds1620_send_bits (bits, value);

 
 

-    udelay(1);
+       udelay (1);

 
 

-    /* go stand alone */
-    bc_ds1620_set_data_dir(1);
-    bc_ds1620_set_reset(0);
-    bc_ds1620_set_clk(0);
+       /* go stand alone */
+       bc_ds1620_set_data_dir (1);
+       bc_ds1620_set_reset (0);
+       bc_ds1620_set_clk (0);

 
 

-    udelay(10000);
+       udelay (10000);

 }
 
 }
 

-static unsigned int ds1620_in(int cmd, int bits)
+static unsigned int ds1620_in (int cmd, int bits)

 {
 {

-    unsigned int value;
+       unsigned int value;

 
 

-    bc_ds1620_set_clk(1);
-    bc_ds1620_set_data_dir(0);
+       bc_ds1620_set_clk (1);
+       bc_ds1620_set_data_dir (0);

 
 

-    bc_ds1620_set_reset(0);
-    udelay(1);
-    bc_ds1620_set_reset(1);
+       bc_ds1620_set_reset (0);
+       udelay (1);
+       bc_ds1620_set_reset (1);

 
 

-    udelay(1);
+       udelay (1);

 
 

-    ds1620_send_bits(8, cmd);
+       ds1620_send_bits (8, cmd);

 
 

-    bc_ds1620_set_data_dir(1);
-    value = ds1620_recv_bits(bits);
+       bc_ds1620_set_data_dir (1);
+       value = ds1620_recv_bits (bits);

 
 

-    /* go stand alone */
-    bc_ds1620_set_data_dir(1);
-    bc_ds1620_set_reset(0);
-    bc_ds1620_set_clk(0);
+       /* go stand alone */
+       bc_ds1620_set_data_dir (1);
+       bc_ds1620_set_reset (0);
+       bc_ds1620_set_clk (0);

 
 

-    return value;
+       return value;

 }
 
 }
 

-static int cvt_9_to_int(unsigned int val)
+static int cvt_9_to_int (unsigned int val)

 {
 {

-    if (val & 0x100)
-       val |= 0xfffffe00;
+       if (val & 0x100)
+               val |= 0xfffffe00;

 
 

-    return val;
+       return val;

 }
 
 /* set thermostate thresholds */
 }
 
 /* set thermostate thresholds */

-static void ds1620_write_state(struct therm *therm)
+static void ds1620_write_state (struct therm *therm)

 {
 {

-    ds1620_out(THERM_WRITE_TL, 9, therm->lo);
-    ds1620_out(THERM_WRITE_TH, 9, therm->hi);
-    ds1620_out(THERM_START_CONVERT, 0, 0);
+       ds1620_out (THERM_WRITE_TL, 9, therm->lo);
+       ds1620_out (THERM_WRITE_TH, 9, therm->hi);
+       ds1620_out (THERM_START_CONVERT, 0, 0);

 }
 
 }
 

-static int cmd_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])

 {
 {

-    int i;
-    struct therm therm;
+       int i;
+       struct therm therm;

 
 

-    sm501_gpio_init();
+       sm501_gpio_init ();

 
 

-    /* print temperature */
-    if (argc == 1) {
-       i = cvt_9_to_int(ds1620_in(THERM_READ_TEMP, 9));
-       printf("%d.%d C\n", i >> 1, i & 1 ? 5 : 0);
-       return 0;
-    }
-
-    /* set to default operation */
-    if (strncmp (argv[1], "set", 3) == 0) {
-       if(strncmp (argv[2], "default", 3) == 0) {
-           therm.hi = +88;
-           therm.lo = -20;
-           therm.hi <<= 1;
-           therm.lo <<= 1;
-           ds1620_write_state(&therm);
-           ds1620_out(THERM_WRITE_CONFIG, 8, CFG_STANDALONE);
-           return 0;
+       /* print temperature */
+       if (argc == 1) {
+               i = cvt_9_to_int (ds1620_in (THERM_READ_TEMP, 9));
+               printf ("%d.%d C\n", i >> 1, i & 1 ? 5 : 0);
+               return 0;

        }
        }

-    }

 
 

-    printf ("Usage:%s\n", cmdtp->help);
-    return 1;
+       /* set to default operation */
+       if (strncmp (argv[1], "set", 3) == 0) {
+               if (strncmp (argv[2], "default", 3) == 0) {
+                       therm.hi = +88;
+                       therm.lo = -20;
+                       therm.hi <<= 1;
+                       therm.lo <<= 1;
+                       ds1620_write_state (&therm);
+                       ds1620_out (THERM_WRITE_CONFIG, 8, CFG_STANDALONE);
+                       return 0;
+               }
+       }
+
+       printf ("Usage:%s\n", cmdtp->help);
+       return 1;

 }
 
 }
 

-U_BOOT_CMD(
-       temp ,  3,      1,      cmd_temp,
-       "temp    - print current temperature\n",
-       "\n"
-       "temp\n"
-       "     - print current temperature\n"
-);
+U_BOOT_CMD (temp, 3, 1, cmd_temp,
+           "temp    - print current temperature\n",
+           "\n" "temp\n" "     - print current temperature\n");

 
 #ifdef CONFIG_BC3450_CAN
 /*
 
 #ifdef CONFIG_BC3450_CAN
 /*


@@ -512,40 +533,40 @@ U_BOOT_CMD(
  * return 1 on CAN initialization failure
  * return 0 if no failure
  */
  * return 1 on CAN initialization failure
  * return 0 if no failure
  */

-int can_init(void)
+int can_init (void)

 {
        static int init_done = 0;
        int i;
        struct mpc5xxx_mscan *can1 =
 {
        static int init_done = 0;
        int i;
        struct mpc5xxx_mscan *can1 =

-               (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0900);
+               (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);

        struct mpc5xxx_mscan *can2 =
        struct mpc5xxx_mscan *can2 =

-               (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0980);
+               (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);

 
        /* GPIO configuration of the CAN pins is done in BC3450.h */
 
        if (!init_done) {
                /* init CAN 1 */
                can1->canctl1 |= 0x80;  /* CAN enable */
 
        /* GPIO configuration of the CAN pins is done in BC3450.h */
 
        if (!init_done) {
                /* init CAN 1 */
                can1->canctl1 |= 0x80;  /* CAN enable */

-               udelay(100);
+               udelay (100);

 
                i = 0;
                can1->canctl0 |= 0x02;  /* sleep mode */
                /* wait until sleep mode reached */
                while (!(can1->canctl1 & 0x02)) {
 
                i = 0;
                can1->canctl0 |= 0x02;  /* sleep mode */
                /* wait until sleep mode reached */
                while (!(can1->canctl1 & 0x02)) {

-                       udelay(10);
-               i++;
-               if (i == 10) {
-                       printf ("%s: CAN1 initialize error, "
-                               "can not enter sleep mode!\n",
-                               __FUNCTION__);
-                       return 1;
-               }
+                       udelay (10);
+                       i++;
+                       if (i == 10) {
+                               printf ("%s: CAN1 initialize error, "
+                                       "can not enter sleep mode!\n",
+                                       __FUNCTION__);
+                               return 1;
+                       }

                }
                i = 0;
                can1->canctl0 = 0x01;   /* enter init mode */
                /* wait until init mode reached */
                while (!(can1->canctl1 & 0x01)) {
                }
                i = 0;
                can1->canctl0 = 0x01;   /* enter init mode */
                /* wait until init mode reached */
                while (!(can1->canctl1 & 0x01)) {

-                       udelay(10);
+                       udelay (10);

                        i++;
                        if (i == 10) {
                                printf ("%s: CAN1 initialize error, "
                        i++;
                        if (i == 10) {
                                printf ("%s: CAN1 initialize error, "


@@ -577,7 +598,7 @@ int can_init(void)
                can1->canctl0 &= ~(0x02);
                /* wait until init and sleep mode left */
                while ((can1->canctl1 & 0x01) || (can1->canctl1 & 0x02)) {
                can1->canctl0 &= ~(0x02);
                /* wait until init and sleep mode left */
                while ((can1->canctl1 & 0x01) || (can1->canctl1 & 0x02)) {

-                       udelay(10);
+                       udelay (10);

                        i++;
                        if (i == 10) {
                                printf ("%s: CAN1 initialize error, "
                        i++;
                        if (i == 10) {
                                printf ("%s: CAN1 initialize error, "


@@ -589,13 +610,13 @@ int can_init(void)
 
                /* init CAN 2 */
                can2->canctl1 |= 0x80;  /* CAN enable */
 
                /* init CAN 2 */
                can2->canctl1 |= 0x80;  /* CAN enable */

-               udelay(100);
+               udelay (100);

 
                i = 0;
                can2->canctl0 |= 0x02;  /* sleep mode */
                /* wait until sleep mode reached */
 
                i = 0;
                can2->canctl0 |= 0x02;  /* sleep mode */
                /* wait until sleep mode reached */

-               while (!(can2->canctl1 & 0x02)) {
-                       udelay(10);
+               while (!(can2->canctl1 & 0x02)) {
+                       udelay (10);

                        i++;
                        if (i == 10) {
                                printf ("%s: CAN2 initialize error, "
                        i++;
                        if (i == 10) {
                                printf ("%s: CAN2 initialize error, "


@@ -607,8 +628,8 @@ int can_init(void)
                i = 0;
                can2->canctl0 = 0x01;   /* enter init mode */
                /* wait until init mode reached */
                i = 0;
                can2->canctl0 = 0x01;   /* enter init mode */
                /* wait until init mode reached */

-               while (!(can2->canctl1 & 0x01)) {
-                       udelay(10);
+               while (!(can2->canctl1 & 0x01)) {
+                       udelay (10);

                        i++;
                        if (i == 10) {
                                printf ("%s: CAN2 initialize error, "
                        i++;
                        if (i == 10) {
                                printf ("%s: CAN2 initialize error, "


@@ -640,7 +661,7 @@ int can_init(void)
                i = 0;
                /* wait until init mode left */
                while ((can2->canctl1 & 0x01) || (can2->canctl1 & 0x02)) {
                i = 0;
                /* wait until init mode left */
                while ((can2->canctl1 & 0x01) || (can2->canctl1 & 0x02)) {

-                       udelay(10);
+                       udelay (10);

                        i++;
                        if (i == 10) {
                                printf ("%s: CAN2 initialize error, "
                        i++;
                        if (i == 10) {
                                printf ("%s: CAN2 initialize error, "


@@ -661,13 +682,13 @@ int can_init(void)
  * return 1 on CAN failure
  * return 0 if no failure
  */
  * return 1 on CAN failure
  * return 0 if no failure
  */

-int do_can(char *argv[])
+int do_can (char *argv[])

 {
        int i;
 {
        int i;

-       struct mpc5xxx_mscan *can1 = 
-               (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0900);
-       struct mpc5xxx_mscan *can2 = 
-               (struct mpc5xxx_mscan *)(CFG_MBAR + 0x0980);
+       struct mpc5xxx_mscan *can1 =
+               (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
+       struct mpc5xxx_mscan *can2 =
+               (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);

 
        /* send a message on CAN1 */
        can1->cantbsel = 0x01;
 
        /* send a message on CAN1 */
        can1->cantbsel = 0x01;


@@ -685,30 +706,27 @@ int do_can(char *argv[])
                i++;
                if (i == 10) {
                        printf ("%s: CAN1 send timeout, "
                i++;
                if (i == 10) {
                        printf ("%s: CAN1 send timeout, "

-                               "can not send message!\n",
-                               __FUNCTION__);
+                               "can not send message!\n", __FUNCTION__);

                        return 1;
                }
                        return 1;
                }

-               udelay(1000);
+               udelay (1000);

        }
        }

-       udelay(1000);
+       udelay (1000);

 
        i = 0;
 
        i = 0;

-       while (!(can2->canrflg & 0x01)) {
+       while (!(can2->canrflg & 0x01)) {

                i++;
                if (i == 10) {
                        printf ("%s: CAN2 receive timeout, "
                i++;
                if (i == 10) {
                        printf ("%s: CAN2 receive timeout, "

-                               "no message received!\n",
-                               __FUNCTION__);
+                               "no message received!\n", __FUNCTION__);

                        return 1;
                }
                        return 1;
                }

-               udelay(1000);
+               udelay (1000);

        }
        }

-       
+

        if (can2->canrxfg.dsr[0] != 0xCC) {
                printf ("%s: CAN2 receive error, "
        if (can2->canrxfg.dsr[0] != 0xCC) {
                printf ("%s: CAN2 receive error, "

-                        "data mismatch!\n",
-                       __FUNCTION__);
+                       "data mismatch!\n", __FUNCTION__);

                return 1;
        }
 
                return 1;
        }
 


@@ -728,24 +746,22 @@ int do_can(char *argv[])
                i++;
                if (i == 10) {
                        printf ("%s: CAN2 send error, "
                i++;
                if (i == 10) {
                        printf ("%s: CAN2 send error, "

-                               "can not send message!\n",
-                               __FUNCTION__);
+                               "can not send message!\n", __FUNCTION__);

                        return 1;
                }
                        return 1;
                }

-               udelay(1000);
+               udelay (1000);

        }
        }

-       udelay(1000);
+       udelay (1000);

 
        i = 0;
 
        i = 0;

-       while (!(can1->canrflg & 0x01)) {
+       while (!(can1->canrflg & 0x01)) {

                i++;
                if (i == 10) {
                        printf ("%s: CAN1 receive timeout, "
                i++;
                if (i == 10) {
                        printf ("%s: CAN1 receive timeout, "

-                               "no message received!\n",
-                               __FUNCTION__);
+                               "no message received!\n", __FUNCTION__);

                        return 1;
                }
                        return 1;
                }

-               udelay(1000);
+               udelay (1000);

        }
 
        if (can1->canrxfg.dsr[0] != 0xCC) {
        }
 
        if (can1->canrxfg.dsr[0] != 0xCC) {


@@ -761,53 +777,51 @@ int do_can(char *argv[])
 /*
  * test - BC3450 HW test routines
  */
 /*
  * test - BC3450 HW test routines
  */

-int cmd_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])

 {
 #ifdef CONFIG_BC3450_CAN
 {
 #ifdef CONFIG_BC3450_CAN

-    int rcode;
-    can_init();
+       int rcode;
+
+       can_init ();

 #endif /* CONFIG_BC3450_CAN */
 
 #endif /* CONFIG_BC3450_CAN */
 

-    sm501_gpio_init();
+       sm501_gpio_init ();

 
 

-    if (argc != 2) {
-       printf ("Usage:%s\n", cmdtp->help);
-       return 1;
-    }
+       if (argc != 2) {
+               printf ("Usage:%s\n", cmdtp->help);
+               return 1;
+       }

 
 

-    if (strncmp (argv[1], "unit-off", 8) == 0) {
-       printf ("waiting 2 seconds...\n");
-       udelay(2000000);
-       *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &= ~PWR_OFF;
-       return 0;
-    }
+       if (strncmp (argv[1], "unit-off", 8) == 0) {
+               printf ("waiting 2 seconds...\n");
+               udelay (2000000);
+               *(vu_long *) (SM501_MMIO_BASE + SM501_GPIO_DATA_HIGH) &=
+                       ~PWR_OFF;
+               return 0;
+       }

 #ifdef CONFIG_BC3450_CAN
 #ifdef CONFIG_BC3450_CAN

-    else if (strncmp (argv[1], "can", 2) == 0) {
-       rcode = do_can (argv);
-       if (simple_strtoul(argv[2], NULL, 10) == 2) {
-           if (rcode == 0)
-               printf ("OK\n");
-           else
-               printf ("Error\n");
+       else if (strncmp (argv[1], "can", 2) == 0) {
+               rcode = do_can (argv);
+               if (simple_strtoul (argv[2], NULL, 10) == 2) {
+                       if (rcode == 0)
+                               printf ("OK\n");
+                       else
+                               printf ("Error\n");
+               }
+               return rcode;

        }
        }

-       return rcode;
-    }

 #endif /* CONFIG_BC3450_CAN */
 
 #endif /* CONFIG_BC3450_CAN */
 

-    printf ("Usage:%s\n", cmdtp->help);
-    return 1;
+       printf ("Usage:%s\n", cmdtp->help);
+       return 1;

 }
 
 }
 

-U_BOOT_CMD(
-       test ,  2,      1,      cmd_test,
-       "test    - unit test routines\n",
-       "\n"
+U_BOOT_CMD (test, 2, 1, cmd_test, "test    - unit test routines\n", "\n"

 #ifdef CONFIG_BC3450_CAN
 #ifdef CONFIG_BC3450_CAN

-       "test can\n"
-       "     - connect CAN1 (X8) with CAN2 (X9) for this test\n"
+           "test can\n"
+           "     - connect CAN1 (X8) with CAN2 (X9) for this test\n"

 #endif /* CONFIG_BC3450_CAN */
 #endif /* CONFIG_BC3450_CAN */

-       "test unit-off\n"
-       "     - turns off the BC3450 unit\n"
-       "       WARNING: Unsaved environment variables will be lost!\n"
-    );
+           "test unit-off\n"
+           "     - turns off the BC3450 unit\n"
+           "       WARNING: Unsaved environment variables will be lost!\n");

 #endif /* CFG_CMD_BSP */
 #endif /* CFG_CMD_BSP */

diff --git a/board/nc650/nand.c b/board/nc650/nand.c
index f27e536e504ac161e15b83cc5d368594a9eb2945..de54386ddd5c72cecf6aa6798219d8feee83e689 100644 (file)
--- a/board/nc650/nand.c
+++ b/board/nc650/nand.c
@@ -37,22 +37,22 @@ static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
        struct nand_chip *this = mtd->priv;
 
        switch(cmd) {
        struct nand_chip *this = mtd->priv;
 
        switch(cmd) {

-               case NAND_CTL_SETCLE:
-                       this->IO_ADDR_W += 2;
-                       break;
-               case NAND_CTL_CLRCLE:
-                       this->IO_ADDR_W -= 2;
-                       break;
-               case NAND_CTL_SETALE:
-                       this->IO_ADDR_W += 1;
-                       break;
-               case NAND_CTL_CLRALE:
-                       this->IO_ADDR_W -= 1;
-                       break;
-               case NAND_CTL_SETNCE:
-               case NAND_CTL_CLRNCE:
-                       /* nop */
-                       break;
+       case NAND_CTL_SETCLE:
+               this->IO_ADDR_W += 2;
+               break;
+       case NAND_CTL_CLRCLE:
+               this->IO_ADDR_W -= 2;
+               break;
+       case NAND_CTL_SETALE:
+               this->IO_ADDR_W += 1;
+               break;
+       case NAND_CTL_CLRALE:
+               this->IO_ADDR_W -= 1;
+               break;
+       case NAND_CTL_SETNCE:
+       case NAND_CTL_CLRNCE:
+               /* nop */
+               break;

        }
 }
 #elif defined(CONFIG_IDS852_REV2)
        }
 }
 #elif defined(CONFIG_IDS852_REV2)


@@ -64,24 +64,24 @@ static void nc650_hwcontrol(struct mtd_info *mtd, int cmd)
        struct nand_chip *this = mtd->priv;
 
        switch(cmd) {
        struct nand_chip *this = mtd->priv;
 
        switch(cmd) {

-               case NAND_CTL_SETCLE:
-                       *(((volatile __u8 *) this->IO_ADDR_W) + 0xa) = 0; 
-                       break;
-               case NAND_CTL_CLRCLE:
-                       *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; 
-                       break;
-               case NAND_CTL_SETALE:
-                       *(((volatile __u8 *) this->IO_ADDR_W) + 0x9) = 0; 
-                       break;
-               case NAND_CTL_CLRALE:
-                       *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; 
-                       break;
-               case NAND_CTL_SETNCE:
-                       *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0; 
-                       break;
-               case NAND_CTL_CLRNCE:
-                       *(((volatile __u8 *) this->IO_ADDR_W) + 0xc) = 0; 
-                       break;
+       case NAND_CTL_SETCLE:
+               *(((volatile __u8 *) this->IO_ADDR_W) + 0xa) = 0;
+               break;
+       case NAND_CTL_CLRCLE:
+               *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
+               break;
+       case NAND_CTL_SETALE:
+               *(((volatile __u8 *) this->IO_ADDR_W) + 0x9) = 0;
+               break;
+       case NAND_CTL_CLRALE:
+               *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
+               break;
+       case NAND_CTL_SETNCE:
+               *(((volatile __u8 *) this->IO_ADDR_W) + 0x8) = 0;
+               break;
+       case NAND_CTL_CLRNCE:
+               *(((volatile __u8 *) this->IO_ADDR_W) + 0xc) = 0;
+               break;

        }
 }
 #else
        }
 }
 #else

diff --git a/board/nc650/nc650.c b/board/nc650/nc650.c
index c90ac9c955b5b42f41ab14a2a629b695888bd3d6..8a6b5b00a9cbf9b59e61a51299de540d0b86ab75 100644 (file)
--- a/board/nc650/nc650.c
+++ b/board/nc650/nc650.c
@@ -265,8 +265,8 @@ int misc_init_r(void)
        int             iCompatMode = 0;
        char            *pParam = NULL;
        char            *envlb;
        int             iCompatMode = 0;
        char            *pParam = NULL;
        char            *envlb;

-       
-       /* 
+
+       /*

           First byte in CPLD read address space signals compatibility mode
           0 - cp850
           1 - kp852
           First byte in CPLD read address space signals compatibility mode
           0 - cp850
           1 - kp852


@@ -274,9 +274,9 @@ int misc_init_r(void)
        pParam = (char*)(CFG_CPLD_BASE);
        if( *pParam != 0)
                iCompatMode = 1;
        pParam = (char*)(CFG_CPLD_BASE);
        if( *pParam != 0)
                iCompatMode = 1;

-       
+

        if ( iCompatMode != 0) {
        if ( iCompatMode != 0) {

-               /* 
+               /*

                   In KP852 compatibility mode we have to write to
                   DPRAM as early as possible the binary coded
                   line config and board name.
                   In KP852 compatibility mode we have to write to
                   DPRAM as early as possible the binary coded
                   line config and board name.


@@ -288,7 +288,7 @@ int misc_init_r(void)
                        setenv( DPRAM_VARNAME, DEFAULT_LB);
                        envlb = DEFAULT_LB;
                }
                        setenv( DPRAM_VARNAME, DEFAULT_LB);
                        envlb = DEFAULT_LB;
                }

-               
+

                /* Status string */
                printf("Mode:  KP852(LB=%s)\n", envlb);
 
                /* Status string */
                printf("Mode:  KP852(LB=%s)\n", envlb);
 


@@ -305,7 +305,7 @@ int misc_init_r(void)
        } else {
                puts("Mode:  CP850\n");
        }
        } else {
                puts("Mode:  CP850\n");
        }

-       
+

        return 0;
 }
 #endif
        return 0;
 }
 #endif

diff --git a/include/configs/BC3450.h b/include/configs/BC3450.h
index a79de4094eb4bfdf707d3b584142c290d2384ae8..5b54f30e08d6bcd5ee7da1a9f38fd59b3024765b 100644 (file)
--- a/include/configs/BC3450.h
+++ b/include/configs/BC3450.h
@@ -42,21 +42,21 @@
 #define CONFIG_MPC5200         1       /* (more precisely a MPC5200 CPU)   */
 #define CONFIG_TQM5200         1       /* ... on a TQM5200 module          */
 
 #define CONFIG_MPC5200         1       /* (more precisely a MPC5200 CPU)   */
 #define CONFIG_TQM5200         1       /* ... on a TQM5200 module          */
 

-#define CONFIG_BC3450           1       /* ... on a BC3450 mainboard       */
-#define CONFIG_BC3450_PS2      1       /*  + a PS/2 converter onboard      */
-#define CONFIG_BC3450_IDE      1       /*  + IDE drives (Compact Flash)    */
+#define CONFIG_BC3450          1       /* ... on a BC3450 mainboard        */
+#define CONFIG_BC3450_PS2      1       /*  + a PS/2 converter onboard      */
+#define CONFIG_BC3450_IDE      1       /*  + IDE drives (Compact Flash)    */

 #define CONFIG_BC3450_USB      1       /*  + USB support                   */
 # define CONFIG_FAT            1       /*    + FAT support                 */
 # define CONFIG_EXT2           1       /*    + EXT2 support                */
 #undef CONFIG_BC3450_BUZZER            /*  + Buzzer onboard                */
 #undef CONFIG_BC3450_CAN               /*  + CAN transceiver               */
 #undef CONFIG_BC3450_DS1340            /*  + a RTC DS1340 onboard          */
 #define CONFIG_BC3450_USB      1       /*  + USB support                   */
 # define CONFIG_FAT            1       /*    + FAT support                 */
 # define CONFIG_EXT2           1       /*    + EXT2 support                */
 #undef CONFIG_BC3450_BUZZER            /*  + Buzzer onboard                */
 #undef CONFIG_BC3450_CAN               /*  + CAN transceiver               */
 #undef CONFIG_BC3450_DS1340            /*  + a RTC DS1340 onboard          */

-#undef CONFIG_BC3450_DS3231            /*  + a RTC DS3231 onboard      tbd */
-#undef CONFIG_BC3450_AC97              /*  + AC97 on PSC2,             tbd */
+#undef CONFIG_BC3450_DS3231            /*  + a RTC DS3231 onboard      tbd */
+#undef CONFIG_BC3450_AC97              /*  + AC97 on PSC2,             tbd */

 #define CONFIG_BC3450_FP       1       /*  + enable FP O/P                 */
 #undef CONFIG_BC3450_CRT               /*  + enable CRT O/P (Debug only!)  */
 
 #define CONFIG_BC3450_FP       1       /*  + enable FP O/P                 */
 #undef CONFIG_BC3450_CRT               /*  + enable CRT O/P (Debug only!)  */
 

-#define CFG_MPC5XXX_CLKIN      33000000 /* ... running at 33.000000MHz     */
+#define CFG_MPC5XXX_CLKIN      33000000 /* ... running at 33.000000MHz     */

 
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02    /* Software reboot                  */
 
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02    /* Software reboot                  */


@@ -91,7 +91,7 @@
  */
 # define CONFIG_PCI            1
 # define CONFIG_PCI_PNP                1
  */
 # define CONFIG_PCI            1
 # define CONFIG_PCI_PNP                1

-/* #define CONFIG_PCI_SCAN_SHOW        1 */
+/* #define CONFIG_PCI_SCAN_SHOW 1 */

 
 #define CONFIG_PCI_MEM_BUS     0x40000000
 #define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS
 
 #define CONFIG_PCI_MEM_BUS     0x40000000
 #define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS


@@ -103,7 +103,7 @@
 
 #define CONFIG_NET_MULTI       1
 /*#define CONFIG_EEPRO100      XXX - FIXME: conflicts when CONFIG_MII is enabled */
 
 #define CONFIG_NET_MULTI       1
 /*#define CONFIG_EEPRO100      XXX - FIXME: conflicts when CONFIG_MII is enabled */

-#define CFG_RX_ETH_BUFFER      8       /* use 8 rx buffer on eepro100  */
+#define CFG_RX_ETH_BUFFER      8       /* use 8 rx buffer on eepro100  */

 #define CONFIG_NS8382X         1
 
 #ifdef CONFIG_PCI
 #define CONFIG_NS8382X         1
 
 #ifdef CONFIG_PCI


@@ -132,15 +132,15 @@
 # define ADD_BMP_CMD           0
 #endif
 
 # define ADD_BMP_CMD           0
 #endif
 

-/* 
- * Partitions 
+/*
+ * Partitions

  */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 
  */
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 #define CONFIG_ISO_PARTITION
 

-/* 
- * USB 
+/*
+ * USB

  */
 #ifdef CONFIG_BC3450_USB
 # define CONFIG_USB_OHCI
  */
 #ifdef CONFIG_BC3450_USB
 # define CONFIG_USB_OHCI


@@ -150,8 +150,8 @@
 # define ADD_USB_CMD           0
 #endif /* CONFIG_BC3450_USB */
 
 # define ADD_USB_CMD           0
 #endif /* CONFIG_BC3450_USB */
 

-/* 
- * POST support 
+/*
+ * POST support

  */
 #define CONFIG_POST            (CFG_POST_MEMORY   | \
                                 CFG_POST_CPU      | \
  */
 #define CONFIG_POST            (CFG_POST_MEMORY   | \
                                 CFG_POST_CPU      | \


@@ -165,8 +165,8 @@
 # define CFG_CMD_POST_DIAG 0
 #endif /* CONFIG_POST */
 
 # define CFG_CMD_POST_DIAG 0
 #endif /* CONFIG_POST */
 

-/* 
- * IDE 
+/*
+ * IDE

  */
 #ifdef CONFIG_BC3450_IDE
 # define ADD_IDE_CMD           CFG_CMD_IDE
  */
 #ifdef CONFIG_BC3450_IDE
 # define ADD_IDE_CMD           CFG_CMD_IDE


@@ -219,7 +219,7 @@
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 

-#define        CONFIG_TIMESTAMP                /* display image timestamps */
+#define CONFIG_TIMESTAMP               /* display image timestamps */

 
 #if (TEXT_BASE == 0xFC000000)          /* Boot low */
 #   define CFG_LOWBOOT         1
 
 #if (TEXT_BASE == 0xFC000000)          /* Boot low */
 #   define CFG_LOWBOOT         1


@@ -242,14 +242,14 @@
        "ipaddr=192.168.1.10\0"                                         \
        "serverip=192.168.1.3\0"                                        \
        "netmask=255.255.255.0\0"                                       \
        "ipaddr=192.168.1.10\0"                                         \
        "serverip=192.168.1.3\0"                                        \
        "netmask=255.255.255.0\0"                                       \

-        "hostname=bc3450\0"                                             \
+       "hostname=bc3450\0"                                             \

        "rootpath=/opt/eldk/ppc_6xx\0"                                  \
        "rootpath=/opt/eldk/ppc_6xx\0"                                  \

-        "kernel_addr=fc0a0000\0"                                       \
-        "ramdisk_addr=fc1c0000\0"                                      \
+       "kernel_addr=fc0a0000\0"                                        \
+       "ramdisk_addr=fc1c0000\0"                                       \

        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
                "nfsroot=$(serverip):$(rootpath)\0"                     \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
                "nfsroot=$(serverip):$(rootpath)\0"                     \

-        "ideargs=setenv bootargs root=/dev/hda2 ro\0"                  \
+       "ideargs=setenv bootargs root=/dev/hda2 ro\0"                   \

        "addip=setenv bootargs $(bootargs) "                            \
                "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
                ":$(hostname):$(netdev):off panic=1\0"                  \
        "addip=setenv bootargs $(bootargs) "                            \
                "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"      \
                ":$(hostname):$(netdev):off panic=1\0"                  \


@@ -260,10 +260,10 @@
        "flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0"   \
        "net_nfs=tftp 200000 $(bootfile); "                             \
                "run nfsargs addip addcons; bootm\0"                    \
        "flash_nfs=run nfsargs addip addcons; bootm $(kernel_addr)\0"   \
        "net_nfs=tftp 200000 $(bootfile); "                             \
                "run nfsargs addip addcons; bootm\0"                    \

-        "ide_nfs=run nfsargs addip addcons; "                          \
-                "disk 200000 0:1; bootm\0"                             \
-        "ide_ide=run ideargs addip addcons; "                          \
-                "disk 200000 0:1; bootm\0"                             \
+       "ide_nfs=run nfsargs addip addcons; "                           \
+               "disk 200000 0:1; bootm\0"                              \
+       "ide_ide=run ideargs addip addcons; "                           \
+               "disk 200000 0:1; bootm\0"                              \

        "usb_self=run usbload; run ramargs addip addcons; "             \
                "bootm 200000 400000\0"                                 \
        "usbload=usb reset; usb scan; usbboot 200000 0:1; "             \
        "usb_self=run usbload; run ramargs addip addcons; "             \
                "bootm 200000 400000\0"                                 \
        "usbload=usb reset; usb scan; usbboot 200000 0:1; "             \


@@ -288,7 +288,7 @@
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
  * PCI Bus clocking configuration
  *
  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if

- * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet 
+ * CFG_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet

  * hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
 #if defined(CFG_IPBSPEED_133)
  * hasn't been tested with a IPB Bus Clock of 66 MHz.
  */
 #if defined(CFG_IPBSPEED_133)


@@ -314,9 +314,9 @@
 #define CFG_I2C_SLAVE          0x7F
 
 /*
 #define CFG_I2C_SLAVE          0x7F
 
 /*

- * EEPROM configuration for I²C EEPROM M24C32 
+ * EEPROM configuration for I²C EEPROM M24C32

  * M24C64 should work also. For other EEPROMs config should be verified.
  * M24C64 should work also. For other EEPROMs config should be verified.

- * 
+ *

  * The TQM5200 module may hold an EEPROM at address 0x50.
  */
 #define CFG_I2C_EEPROM_ADDR            0x50    /* 1010000x (TQM) */
  * The TQM5200 module may hold an EEPROM at address 0x50.
  */
 #define CFG_I2C_EEPROM_ADDR            0x50    /* 1010000x (TQM) */


@@ -376,7 +376,7 @@
 #define CFG_ENV_SIZE           0x10000
 #define CFG_ENV_SECT_SIZE      0x20000
 #define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE           0x10000
 #define CFG_ENV_SECT_SIZE      0x20000
 #define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)

-#define        CFG_ENV_SIZE_REDUND     (CFG_ENV_SIZE)
+#define CFG_ENV_SIZE_REDUND    (CFG_ENV_SIZE)

 
 /*
  * Memory map
 
 /*
  * Memory map


@@ -419,25 +419,25 @@
 /*
  * GPIO configuration on BC3450
  *
 /*
  * GPIO configuration on BC3450
  *

- *  PSC1:   UART1 (Service-UART)         [0x xxxxxxx4]
- *  PSC2:   UART2                        [0x xxxxxx4x]
- *    or:   AC/97 if CONFIG_BC3450_AC97  [0x xxxxxx2x]
- *  PSC3:   USB2                         [0x xxxxx1xx]
- *  USB:    UART4(ext.)/UART5(int.)      [0x xxxx2xxx]
- *            (this has to match 
- *            CONFIG_USB_CONFIG which is
- *            used by usb_ohci.c to set 
- *            the USB ports)
- *  Eth:    10/100Mbit Ethernet          [0x xxx0xxxx]
- *            (this is reset to '5' 
- *            in FEC driver: fec.c)
- *  PSC6:   UART6 (int. to PS/2 contr.)  [0x xx5xxxxx]
- *  ATA/CS: ???                          [0x x1xxxxxx]
- *          FIXME! UM Fig 2-10 suggests  [0x x0xxxxxx]
+ *  PSC1:   UART1 (Service-UART)        [0x xxxxxxx4]
+ *  PSC2:   UART2                       [0x xxxxxx4x]
+ *    or:   AC/97 if CONFIG_BC3450_AC97         [0x xxxxxx2x]
+ *  PSC3:   USB2                        [0x xxxxx1xx]
+ *  USB:    UART4(ext.)/UART5(int.)     [0x xxxx2xxx]
+ *           (this has to match
+ *           CONFIG_USB_CONFIG which is
+ *           used by usb_ohci.c to set
+ *           the USB ports)
+ *  Eth:    10/100Mbit Ethernet                 [0x xxx0xxxx]
+ *           (this is reset to '5'
+ *           in FEC driver: fec.c)
+ *  PSC6:   UART6 (int. to PS/2 contr.)         [0x xx5xxxxx]
+ *  ATA/CS: ???                                 [0x x1xxxxxx]
+ *         FIXME! UM Fig 2-10 suggests  [0x x0xxxxxx]

  *  CS1:    Use Pin gpio_wkup_6 as second
  *  CS1:    Use Pin gpio_wkup_6 as second

- *          SDRAM chip select (mem_cs1)
+ *         SDRAM chip select (mem_cs1)

  *  Timer:  CAN2 / SPI
  *  Timer:  CAN2 / SPI

- *  I2C:    CAN1 / I²C2                  [0x bxxxxxxx]
+ *  I2C:    CAN1 / I²C2                 [0x bxxxxxxx]

  */
 #ifdef CONFIG_BC3450_AC97
 # define CFG_GPS_PORT_CONFIG   0xb1502124
  */
 #ifdef CONFIG_BC3450_AC97
 # define CFG_GPS_PORT_CONFIG   0xb1502124


@@ -465,7 +465,7 @@
 #define CFG_MEMTEST_START      0x00100000      /* memtest works on         */
 #define CFG_MEMTEST_END                0x00f00000      /* 1 ... 15 MB in DRAM      */
 
 #define CFG_MEMTEST_START      0x00100000      /* memtest works on         */
 #define CFG_MEMTEST_END                0x00f00000      /* 1 ... 15 MB in DRAM      */
 

-#define CFG_LOAD_ADDR          0x100000        /* default load address     */
+#define CFG_LOAD_ADDR          0x100000        /* default load address     */

 
 #define CFG_HZ                 1000            /* dec freq: 1ms ticks      */
 
 
 #define CFG_HZ                 1000            /* dec freq: 1ms ticks      */
 


@@ -489,7 +489,7 @@
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
 #ifdef CFG_PCISPEED_66
 #define CFG_BOOTCS_START       CFG_FLASH_BASE
 #define CFG_BOOTCS_SIZE                CFG_FLASH_SIZE
 #ifdef CFG_PCISPEED_66

-# define CFG_BOOTCS_CFG                0x0008DF30      /* for pci_clk  = 66 MHz */
+# define CFG_BOOTCS_CFG                0x0008DF30      /* for pci_clk  = 66 MHz */

 #else
 # define CFG_BOOTCS_CFG                0x0004DF30      /* for pci_clk = 33 MHz  */
 #endif
 #else
 # define CFG_BOOTCS_CFG                0x0004DF30      /* for pci_clk = 33 MHz  */
 #endif


@@ -533,17 +533,17 @@
  * USB stuff
  */
 #define CONFIG_USB_CLOCK       0x0001BBBB
  * USB stuff
  */
 #define CONFIG_USB_CLOCK       0x0001BBBB

-#define CONFIG_USB_CONFIG      0x00002000      /* we're using Port 2   */
+#define CONFIG_USB_CONFIG      0x00002000      /* we're using Port 2   */

 
 /*
  * IDE/ATA stuff Supports IDE harddisk
  */
 #undef CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 
 
 /*
  * IDE/ATA stuff Supports IDE harddisk
  */
 #undef CONFIG_IDE_8xx_PCCARD           /* Use IDE with PC Card Adapter */
 

-#undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE     not supported */
-#undef CONFIG_IDE_LED                  /* LED for ide    not supported */
+#undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE     not supported */
+#undef CONFIG_IDE_LED                  /* LED for ide    not supported */

 
 

-#define CONFIG_IDE_RESET               /* reset for ide      supported */
+#define CONFIG_IDE_RESET               /* reset for ide      supported */

 #define CONFIG_IDE_PREINIT
 
 #define CFG_IDE_MAXBUS         1       /* max. 1 IDE bus               */
 #define CONFIG_IDE_PREINIT
 
 #define CFG_IDE_MAXBUS         1       /* max. 1 IDE bus               */