ARM: tegra: pull Tegra30 SoC DT from Linux v4.7
authorStephen Warren <swarren@nvidia.com>
Tue, 13 Sep 2016 16:45:51 +0000 (10:45 -0600)
committerTom Warren <twarren@nvidia.com>
Tue, 27 Sep 2016 16:11:02 +0000 (09:11 -0700)
commitce2f2d2ae7fd1350309e0680cd427258ddd8a26e
tree527672ca92456458a2e4886c9ed26166765bb2b6
parent50a303bdfa413f8387da32f428ea1f3829c94498
ARM: tegra: pull Tegra30 SoC DT from Linux v4.7

The primary benefit of this change is that it adds all missing clocks and
resets properties to peripherals. This will allow peripheral drivers to
migrate to the standard clock and reset APIs in the future.

Main changes:
* Modification of PCIe memory region addresses. The HW memory layout is
  programmable, so this should work fine, and Beaver PCIe was tested
  without issue.
* Removal of pcie_xclk from the PCIe node and clock binding header. This
  clock doesn't exist and isn't used; only a reset with this ID exists.
* Conversion of SPI nodes to standard DMA bindings. U-Boot doesn't use
  DMA so isn't affected.
* Split of EHCI and USB PHY nodes. The EHCI nodes continue to contain all
  information required by U-Boot, so U-Boot is not affected.
* Changed the phy_type value for the second USB port. This required board
  DTs to be updated to keep the same configuration.
* Boards need to define the clk32k_in clock that feeds the Tegra PMC.
* Addition of tegra30-mc.h since tegra30.dtsi now includes it.
* Conversion of many magic numbers to named defines.
* Addition of many nodes not used by U-Boot.
* Node sort order fixes.

Remaining deltas relative to the Linux DT:
* None.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
arch/arm/dts/tegra30-apalis.dts
arch/arm/dts/tegra30-beaver.dts
arch/arm/dts/tegra30-cardhu.dts
arch/arm/dts/tegra30-colibri.dts
arch/arm/dts/tegra30-tamonten.dtsi
arch/arm/dts/tegra30.dtsi
include/dt-bindings/clock/tegra30-car.h
include/dt-bindings/memory/tegra30-mc.h [new file with mode: 0644]