arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support
authorJagan Teki <jagan@amarulasolutions.com>
Tue, 13 Dec 2016 16:56:58 +0000 (17:56 +0100)
committerStefano Babic <sbabic@denx.de>
Fri, 16 Dec 2016 16:16:10 +0000 (17:16 +0100)
commit871ec6da42a52d24f700c708d90b194c83a06a9a
treef38cce280608ac508530c3d4f856204b94c5e2b6
parent704b9cfc9e81dd22d94d67ed6952f1a7132f9f15
arm: imx6q: Add Engicam i.CoreM6 Quad/Dual RQS Starter Kit initial support

Boot from MMC:
-------------
U-Boot SPL 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44)
Trying to boot from MMC1

U-Boot 2016.11-rc2-g217bd8e-dirty (Nov 08 2016 - 22:59:44 +0530)

CPU:   Freescale i.MX6D rev1.2 at 792 MHz
Reset cause: POR
Model: Engicam i.CoreM6 Quad/Dual RQS Starter Kit
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   CPU Net Initialization Failed
No ethernet found.
Hit any key to stop autoboot:  0
icorem6qdl-rqs>

Cc: Stefano Babic <sbabic@denx.de>
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
arch/arm/cpu/armv7/mx6/Kconfig
arch/arm/dts/Makefile
arch/arm/dts/imx6q-icore-rqs.dts [new file with mode: 0644]
arch/arm/dts/imx6qdl-icore-rqs.dtsi [new file with mode: 0644]
board/engicam/icorem6_rqs/Kconfig [new file with mode: 0644]
board/engicam/icorem6_rqs/MAINTAINERS [new file with mode: 0644]
board/engicam/icorem6_rqs/Makefile [new file with mode: 0644]
board/engicam/icorem6_rqs/README [new file with mode: 0644]
board/engicam/icorem6_rqs/icorem6_rqs.c [new file with mode: 0644]
configs/imx6q_icore_rqs_mmc_defconfig [new file with mode: 0644]
include/configs/imx6qdl_icore_rqs.h [new file with mode: 0644]