X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=test%2Fpy%2Ftests%2Ftest_dfu.py;h=a24600376cb73e663d43dd40bc8d44f9daf6cf45;hb=592cd5defd4f71d34ffcbd8dd3326bc10f662e20;hp=0442af8c84a6e5ff1972824ac98e281762adb4af;hpb=8eb37524468efa6f90dd00862aeaabe934557a5a;p=oweals%2Fu-boot.git

diff --git a/test/py/tests/test_dfu.py b/test/py/tests/test_dfu.py
index 0442af8c84..a24600376c 100644
--- a/test/py/tests/test_dfu.py
+++ b/test/py/tests/test_dfu.py
@@ -1,6 +1,5 @@
-# Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
-#
 # SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved.
 
 # Test U-Boot's "dfu" command. The test starts DFU in U-Boot, waits for USB
 # device enumeration on the host, executes dfu-util multiple times to test
@@ -30,6 +29,13 @@ env__usb_dev_ports = (
     },
 )
 
+# Optional entries (required only when "alt_id_test_file" and
+# "alt_id_dummy_file" are specified).
+test_file_name = "/dfu_test.bin"
+dummy_file_name = "/dfu_dummy.bin"
+# Above files are used to generate proper "alt_info" entry
+"alt_info": "/%s ext4 0 2;/%s ext4 0 2" % (test_file_name, dummy_file_name),
+
 env__dfu_configs = (
     # eMMC, partition 1
     {
@@ -52,6 +58,16 @@ env__dfu_configs = (
         # $dfu_alt_info, each time the dfu command is run, by concatenating
         # $dfu_alt_boot and $dfu_alt_system.
         "alt_info_env_name": "dfu_alt_system",
+        # This value is optional.
+        # For boards which require the "test file" alt setting number other than
+        # default (0) it is possible to specify exact file name to be used as
+        # this parameter.
+        "alt_id_test_file": test_file_name,
+        # This value is optional.
+        # For boards which require the "dummy file" alt setting number other
+        # than default (1) it is possible to specify exact file name to be used
+        # as this parameter.
+        "alt_id_dummy_file": dummy_file_name,
     },
 )
 
@@ -63,6 +79,13 @@ ACTION=="add", SUBSYSTEM=="block", SUBSYSTEMS=="usb", KERNELS=="3-13", MODE:="66
 (You may wish to change the group ID instead of setting the permissions wide
 open. All that matters is that the user ID running the test can access the
 device.)
+
+c) An optional udev rule to give you a persistent value to use in
+host_usb_dev_node. For example:
+
+IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="bus/usb/by-path/$env{ID_PATH}"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="bus/usb/by-path/$env{ID_PATH}-port$env{.ID_PORT}"
 """
 
 # The set of file sizes to test. These values trigger various edge-cases such
@@ -89,6 +112,7 @@ test_sizes_default = (
 first_usb_dev_port = None
 
 @pytest.mark.buildconfigspec('cmd_dfu')
+@pytest.mark.requiredtool('dfu-util')
 def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
     """Test the "dfu" command; the host system must be able to enumerate a USB
     device when "dfu" is running, various DFU transfers are tested, and the
@@ -107,10 +131,6 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
         Nothing.
     """
 
-    # Default alt settings for test and dummy files
-    alt_setting_test_file = 0
-    alt_setting_dummy_file = 1
-
     def start_dfu():
         """Start U-Boot's dfu shell command.
 
@@ -123,6 +143,8 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
             Nothing.
         """
 
+        u_boot_utils.wait_until_file_open_fails(
+            env__usb_dev_port['host_usb_dev_node'], True)
         fh = u_boot_utils.attempt_to_open_file(
             env__usb_dev_port['host_usb_dev_node'])
         if fh:
@@ -188,7 +210,7 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
             Nothing.
         """
 
-        cmd = ['dfu-util', '-a', str(alt_setting), up_dn_load_arg, fn]
+        cmd = ['dfu-util', '-a', alt_setting, up_dn_load_arg, fn]
         if 'host_usb_port_path' in env__usb_dev_port:
             cmd += ['-p', env__usb_dev_port['host_usb_port_path']]
         u_boot_utils.run_and_log(u_boot_console, cmd)
@@ -276,6 +298,9 @@ def test_dfu(u_boot_console, env__usb_dev_port, env__dfu_config):
     dummy_f = u_boot_utils.PersistentRandomFile(u_boot_console,
         'dfu_dummy.bin', 1024)
 
+    alt_setting_test_file = env__dfu_config.get('alt_id_test_file', '0')
+    alt_setting_dummy_file = env__dfu_config.get('alt_id_dummy_file', '1')
+
     ignore_cleanup_errors = True
     try:
         start_dfu()