X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2Fmt7620n.dtsi;h=a3132b8a598f1fc1ca0db215ac895ff042b64349;hb=c550ad3d3a70b409a482896a77cfc890823d0221;hp=1dedea588f7d724be0d9f89c353b494be7364a80;hpb=93d8dc870ee07027ca1e27f19831d6127402336f;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/mt7620n.dtsi b/target/linux/ramips/dts/mt7620n.dtsi
index 1dedea588f..a3132b8a59 100644
--- a/target/linux/ramips/dts/mt7620n.dtsi
+++ b/target/linux/ramips/dts/mt7620n.dtsi
@@ -20,10 +20,15 @@
 		compatible = "mti,cpu-interrupt-controller";
 	};
 
+	aliases {
+		spi0 = &spi0;
+		spi1 = &spi1;
+	};
+
 	palmbus@10000000 {
 		compatible = "palmbus";
 		reg = <0x10000000 0x200000>;
-                ranges = <0x0 0x10000000 0x1FFFFF>;
+		ranges = <0x0 0x10000000 0x1FFFFF>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -154,15 +159,15 @@
 			status = "disabled";
 		};
 
-		spi@b00 {
+		spi0: spi@b00 {
 			compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi";
-			reg = <0xb00 0x100>;
+			reg = <0xb00 0x40>;
 
 			resets = <&rstctrl 18>;
 			reset-names = "spi";
 
 			#address-cells = <1>;
-			#size-cells = <1>;
+			#size-cells = <0>;
 
 			status = "disabled";
 
@@ -170,6 +175,22 @@
 			pinctrl-0 = <&spi_pins>;
 		};
 
+		spi1: spi@b40 {
+			compatible = "ralink,rt2880-spi";
+			reg = <0xb40 0x60>;
+
+			resets = <&rstctrl 18>;
+			reset-names = "spi";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			status = "disabled";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi_cs1>;
+		};
+
 		uartlite@c00 {
 			compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a";
 			reg = <0xc00 0x100>;
@@ -202,14 +223,24 @@
 		compatible = "ralink,rt2880-pinmux";
 		pinctrl-names = "default";
 		pinctrl-0 = <&state_default>;
+
 		state_default: pinctrl0 {
 		};
+
 		spi_pins: spi {
 			spi {
 				ralink,group = "spi";
 				ralink,function = "spi";
 			};
 		};
+
+		spi_cs1: spi1 {
+			spi1 {
+				ralink,group = "spi_cs1";
+				ralink,function = "spi_cs1";
+			};
+		};
+
 		uartlite_pins: uartlite {
 			uart {
 				ralink,group = "uartlite";
@@ -223,8 +254,9 @@
 		#reset-cells = <1>;
 	};
 
-	ubsphy {
+	usbphy: usbphy {
 		compatible = "ralink,mt7620a-usbphy";
+		#phy-cells = <1>;
 
 		resets = <&rstctrl 22 &rstctrl 25>;
 		reset-names = "host", "device";
@@ -255,6 +287,9 @@
 		compatible = "ralink,mt7620a-gsw";
 		reg = <0x10110000 8000>;
 
+		resets = <&rstctrl 23>;
+		reset-names = "esw";
+
 		interrupt-parent = <&intc>;
 		interrupts = <17>;
 		ralink,port4 = "gmac";
@@ -267,6 +302,9 @@
 		interrupt-parent = <&intc>;
 		interrupts = <18>;
 
+		phys = <&usbphy 1>;
+		phy-names = "usb";
+
 		status = "disabled";
 	};
 
@@ -274,9 +312,22 @@
 		compatible = "ralink,rt3xxx-ohci";
 		reg = <0x101c1000 0x1000>;
 
+		phys = <&usbphy 1>;
+		phy-names = "usb";
+
 		interrupt-parent = <&intc>;
 		interrupts = <18>;
 
 		status = "disabled";
 	};
+
+	wmac@10180000 {
+		compatible = "ralink,rt7620-wmac", "ralink,rt2880-wmac";
+		reg = <0x10180000 40000>;
+
+		interrupt-parent = <&cpuintc>;
+		interrupts = <6>;
+
+		ralink,eeprom = "soc_wmac.eeprom";
+	};
 };