X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FWZR-AGL300NH.dts;h=23fba7cb8fd1e2dca4cbe7fcf0097f46a3d12c31;hb=51bca43f39f0d53ef4b5facd5484347655255b12;hp=8e18e90be237b91558bcbac3ca3d7334fcf2d5b8;hpb=361839151407c897bb1856bc66712a28dc7f0024;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/WZR-AGL300NH.dts b/target/linux/ramips/dts/WZR-AGL300NH.dts
index 8e18e90be2..23fba7cb8f 100644
--- a/target/linux/ramips/dts/WZR-AGL300NH.dts
+++ b/target/linux/ramips/dts/WZR-AGL300NH.dts
@@ -1,6 +1,6 @@
 /dts-v1/;
 
-/include/ "rt2880.dtsi"
+#include "rt2880.dtsi"
 
 / {
 	#address-cells = <1>;
@@ -8,25 +8,17 @@
 	compatible = "WZR-AGL300NH", "ralink,rt2880-soc";
 	model = "Buffalo WZR-AGL300NH";
 
-	palmbus@300000 {
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-	};
-
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "uartlite", "mdio";
-				ralink,function = "gpio";
-			};
-		};
+	pci@440000 {
+		compatible = "ralink,rt288x-pci";
+		reg = <0x00440000 0x20000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		status = "ok";
 	};
 
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -37,64 +29,49 @@
 			reg = <0x0 0x30000>;
 			read-only;
 		};
+
 		partition@30000 {
 			label = "uboot-env";
 			reg = <0x30000 0x10000>;
 			read-only;
 		};
+
 		factory: partition@40000 {
 			label = "factory";
 			reg = <0x40000 0x10000>;
 			read-only;
 		};
+
 		partition@50000 {
 			label = "firmware";
 			reg = <0x50000 0x3b0000>;
 		};
 	};
 
-	ethernet@400000 {
-		status = "okay";
-		mtd-mac-address = <&factory 0x4>;
-
-                port@0 {
-			ralink,fixed-link = <1000 1 1 1>;
-		};
-
-		mdio-bus {
-			status = "okay";
-			phy0: ethernet-phy@0 {
-				phy-mode = "mii";
-				reg = <0>;
-			};
-		};
-	};
-
 	rtl8366s {
 		compatible = "realtek,rtl8366s";
 		gpio-sda = <&gpio0 1 0>;
 		gpio-sck = <&gpio0 2 0>;
 	};
 
-	wmac@480000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
 			linux,code = <0x211>;
 		};
+
 		router {
 			label = "router_switch";
 			gpios = <&gpio0 7 0>;
 			linux,code = <0x100>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 9 1>;
@@ -106,30 +83,58 @@
 		compatible = "gpio-leds";
 
 		router {
-			label = "buffalo:green:router";
+			label = "wzr-agl300nh:green:router";
 			gpios = <&gpio0 8 1>;
 		};
+
 		diag {
-			label = "buffalo:red:diag";
+			label = "wzr-agl300nh:red:diag";
 			gpios = <&gpio0 12 1>;
 		};
+
 		security_g {
-			label = "buffalo:orange:security_g";
+			label = "wzr-agl300nh:orange:security_g";
 			gpios = <&gpio0 11 1>;
 		};
+
 		security_n {
-			label = "buffalo:orange:security_n";
+			label = "wzr-agl300nh:orange:security_n";
 			gpios = <&gpio0 13 1>;
 		};
 	};
+};
 
+&gpio0 {
+	status = "okay";
+};
 
-	pcibus0: pci@00440000 {
-		compatible = "ralink,rt288x-pci";
-		reg = <0x00440000 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uartlite", "mdio";
+			ralink,function = "gpio";
+		};
+	};
+};
 
-		status = "ok";
+&ethernet {
+	status = "okay";
+	mtd-mac-address = <&factory 0x4>;
+
+	port@0 {
+		mediatek,fixed-link = <1000 1 1 1>;
 	};
+
+	mdio-bus {
+		status = "okay";
+
+		phy0: ethernet-phy@0 {
+			phy-mode = "mii";
+			reg = <0>;
+		};
+	};
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
 };