X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FW150M.dts;h=9ac84a0f4b774b0beb1e84e41ff17d6474d5eafd;hb=2b55c83e68068887db9e49de8e81b1b4a267a4f2;hp=31ad7bf288d894291909886c07fc293b1a13dee2;hpb=d16de0b69f70d395d4097e00613047ecf05d3d39;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/W150M.dts b/target/linux/ramips/dts/W150M.dts
index 31ad7bf288..9ac84a0f4b 100644
--- a/target/linux/ramips/dts/W150M.dts
+++ b/target/linux/ramips/dts/W150M.dts
@@ -1,67 +1,75 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
 
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "3G300M", "ralink,rt3050-soc";
-	model = "Tenda 3G300M";
-
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3872k@0x50000(firmware)";
-	};
+#include <dt-bindings/input/input.h>
 
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii", "jtag";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-	};
+/ {
+	compatible = "W150M", "ralink,rt3050-soc";
+	model = "Tenda W150M";
 
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3c8000>;
+		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		3grouter {
-			label = "tenda:blue:3grouter";
+			label = "w150m:blue:3grouter";
 			gpios = <&gpio0 11 1>;
 		};
+
 		ap {
-			label = "tenda:blue:ap";
+			label = "w150m:blue:ap";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wisprouter {
-			label = "tenda:blue:wisprouter";
+			label = "w150m:blue:wisprouter";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wirelessrouter {
-			label = "tenda:blue:wirelessrouter";
+			label = "w150m:blue:wirelessrouter";
 			gpios = <&gpio0 13 1>;
 		};
+
 		3g {
-			label = "tenda:blue:3g";
+			label = "w150m:blue:3g";
 			gpios = <&gpio0 7 1>;
 		};
+
 		wpsreset {
-			label = "tenda:blue:wpsreset";
+			label = "w150m:blue:wpsreset";
 			gpios = <&gpio0 14 1>;
 		};
 	};
@@ -71,28 +79,38 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 0 1>;
-			linux,code = <0x198>;
+			linux,code = <KEY_RESTART>;
 		};
+
 		mode {
 			label = "mode";
 			gpios = <&gpio0 10 1>;
-			linux,code = <0x100>;
+			linux,code = <BTN_0>;
 		};
 	};
+};
 
-	ethernet@10100000 {
-		status = "okay";
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+			ralink,function = "gpio";
+		};
 	};
+};
 
-	esw@10110000 {
-		status = "okay";
-		ralink,portmap = <0x2f>;
-	};
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
 
-	wmac@10180000 {
-		status = "okay";
-	};
+&esw {
+	mediatek,portmap = <0x2f>;
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
 };