X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FRT-N15.dts;h=03821cac862780e6a54165939cb42de521c1691b;hb=40f808600c9d1f821fa3d0eee34a52916415f69f;hp=27b0da97fe414af116072387ebee72aa736bf3ee;hpb=5b437e204f2a5cf086c67b52b3751ba414ec6597;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/RT-N15.dts b/target/linux/ramips/dts/RT-N15.dts
index 27b0da97fe..03821cac86 100644
--- a/target/linux/ramips/dts/RT-N15.dts
+++ b/target/linux/ramips/dts/RT-N15.dts
@@ -9,22 +9,23 @@
 	model = "Asus RT-N15";
 
 	palmbus@300000 {
-		sysc@0 {
-			ralink,pinmux = "uartlite";
-			ralink,gpiomux = "i2c";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
 		gpio0: gpio@600 {
 			status = "okay";
 		};
 	};
 
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "uartlite", "mdio";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
@@ -35,18 +36,21 @@
 			reg = <0x0 0x30000>;
 			read-only;
 		};
+
 		partition@30000 {
 			label = "uboot-env";
 			reg = <0x30000 0x10000>;
 			read-only;
 		};
-		partition@40000 {
+
+		factory: partition@40000 {
 			label = "factory";
 			reg = <0x40000 0x10000>;
 			read-only;
 		};
+
 		partition@50000 {
-			label = "linux";
+			label = "firmware";
 			reg = <0x50000 0x3b0000>;
 		};
 	};
@@ -55,9 +59,18 @@
 		status = "okay";
 		mtd-mac-address = <&factory 0x4>;
 
-                port@0 {
+		port@0 {
 			ralink,fixed-link = <1000 1 1 1>;
 		};
+
+		mdio-bus {
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				phy-mode = "mii";
+				reg = <0>;
+			};
+		};
 	};
 
 	rtl8366s {
@@ -66,16 +79,22 @@
 		gpio-sck = <&gpio0 2 0>;
 	};
 
+	wmac@480000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <100>;
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 0>;
 			linux,code = <0x211>;
 		};
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 12 0>;