X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FPSR-680W.dts;h=f583009ab660b01993abaf6649a0a8e90b7e6446;hb=c550ad3d3a70b409a482896a77cfc890823d0221;hp=986967b9c17c4fb0ae477e7dfb04b4d73aafecf4;hpb=d16de0b69f70d395d4097e00613047ecf05d3d39;p=oweals%2Fopenwrt.git diff --git a/target/linux/ramips/dts/PSR-680W.dts b/target/linux/ramips/dts/PSR-680W.dts index 986967b9c1..f583009ab6 100644 --- a/target/linux/ramips/dts/PSR-680W.dts +++ b/target/linux/ramips/dts/PSR-680W.dts @@ -3,53 +3,69 @@ /include/ "rt3050.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; compatible = "PSR-680W", "ralink,rt3052-soc"; model = "Petatel PSR-680W Wireless 3G Router"; - memorydetect { - ralink,memory = <0x0 0x200000 0x4000000>; - }; - chosen { - bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; + bootargs = "console=ttyS0,115200"; }; - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "uartlite", "sdram"; - ralink,gpiomux = "spi", "jtag", "mdio", "rgmii"; - ralink,uartmux = "i2s uartf"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; - bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; }; ethernet@10100000 { - status = "okay"; + mtd-mac-address = <&factory 0x4>; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x3e>; }; + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + gpio-leds { compatible = "gpio-leds"; + wan { label = "psr-680w:red:wan"; gpios = <&gpio0 19 1>; @@ -61,6 +77,7 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; + reset { label = "reset"; gpios = <&gpio0 0 1>; @@ -68,10 +85,6 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - otg@101c0000 { status = "okay"; };