X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FDIR-860L-B1.dts;h=5154a4dedb6e245b4f627601175d7ab0f1b7098c;hb=3d680c57286a2f77b9cfba275756c711730c7fe2;hp=51cb8e6fb5b0280b7b5a76c46d2f378af6819643;hpb=81c999bbda65c5c2e929e6406998ac25dab97f41;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/DIR-860L-B1.dts b/target/linux/ramips/dts/DIR-860L-B1.dts
index 51cb8e6fb5..5154a4dedb 100644
--- a/target/linux/ramips/dts/DIR-860L-B1.dts
+++ b/target/linux/ramips/dts/DIR-860L-B1.dts
@@ -2,6 +2,8 @@
 
 #include "mt7621.dtsi"
 
+#include <dt-bindings/input/input.h>
+
 / {
 	compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc";
 	model = "D-Link DIR-860L B1";
@@ -15,89 +17,28 @@
 		bootargs = "console=ttyS0,57600";
 	};
 
-	palmbus@1E000000 {
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l12805d";
-				reg = <0 0>;
-				linux,modalias = "m25p80";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x4000>;
-					read-only;
-				};
-
-				radio: partition@34000 {
-					label = "radio";
-					reg = <0x34000 0x4000>;
-					read-only;
-				};
-
-				factory: partition@38000 {
-					label = "factory";
-					reg = <0x38000 0x8000>;
-					read-only;
-				};
-
-				partition@40000 {
-					label = "defaults";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0xfb0000>;
-				};
-			};
-		};
-	};
-
-	pcie@1e140000 {
-		status = "okay";
+	gpio-leds {
+		compatible = "gpio-leds";
 
-		pcie0 {
-			mt76@0,0 {
-				reg = <0x0000 0 0 0 0>;
-				device_type = "pci";
-				mediatek,mtd-eeprom = <&radio 0x2000>;
-				mediatek,2ghz = <0>;
-			};
+		power {
+			label = "dir-860l-b1:orange:power";
+			gpios = <&gpio0 13 1>;
 		};
 
-		pcie1 {
-			mt76@1,0 {
-				reg = <0x0000 0 0 0 0>;
-				device_type = "pci";
-				mediatek,mtd-eeprom = <&radio 0>;
-				mediatek,5ghz = <0>;
-			};
+		power2 {
+			label = "dir-860l-b1:green:power";
+			gpios = <&gpio0 15 1>;
 		};
-	};
 
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
-				ralink,function = "gpio";
-			};
+		net {
+			label = "dir-860l-b1:orange:net";
+			gpios = <&gpio0 14 1>;
 		};
-	};
 
-	gpio-leds {
-		compatible = "gpio-leds";
+		net2 {
+			label = "dir-860l-b1:green:net";
+			gpios = <&gpio0 16 1>;
+		};
 	};
 
 	gpio-keys-polled {
@@ -105,5 +46,96 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 7 1>;
+			linux,code = <KEY_RESTART>;
+		};
+
+		wps {
+			label = "wps";
+			gpios = <&gpio0 18 1>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		linux,modalias = "m25p80";
+		spi-max-frequency = <10000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x4000>;
+			read-only;
+		};
+
+		radio: partition@34000 {
+			label = "radio";
+			reg = <0x34000 0x4000>;
+			read-only;
+		};
+
+		factory: partition@38000 {
+			label = "factory";
+			reg = <0x38000 0x8000>;
+			read-only;
+		};
+
+		partition@40000 {
+			label = "defaults";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0xfb0000>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+
+	pcie0 {
+		mt76@0,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&radio 0x2000>;
+			mediatek,2ghz = <0>;
+		};
+	};
+
+	pcie1 {
+		mt76@1,0 {
+			reg = <0x0000 0 0 0 0>;
+			device_type = "pci";
+			mediatek,mtd-eeprom = <&radio 0>;
+			mediatek,5ghz = <0>;
+		};
+	};
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "i2c", "uart2", "uart3", "rgmii2", "sdhci";
+			ralink,function = "gpio";
+		};
 	};
 };