X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FDIR-300-B1.dts;h=e1962d54680f248bc22c00860274a285098dd210;hb=40f808600c9d1f821fa3d0eee34a52916415f69f;hp=a9947f568cc94fc61ca9c80c7f1b9e9c92a7f8bd;hpb=e468abcae08b82174ab086261a8767e468b720ed;p=oweals%2Fopenwrt.git diff --git a/target/linux/ramips/dts/DIR-300-B1.dts b/target/linux/ramips/dts/DIR-300-B1.dts index a9947f568c..e1962d5468 100644 --- a/target/linux/ramips/dts/DIR-300-B1.dts +++ b/target/linux/ramips/dts/DIR-300-B1.dts @@ -6,27 +6,18 @@ compatible = "DIR-300-B1", "ralink,rt3050-soc"; model = "D-Link DIR-300 B1"; - memorydetect { - ralink,memory = <0x0 0x200000 0x4000000>; - }; - - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf"; + ralink,function = "gpio"; + }; }; - - gpio0: gpio@600 { - status = "okay"; - }; - }; cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; - bank-width = <2>; device-width = <2>; #address-cells = <1>; @@ -38,13 +29,13 @@ read-only; }; - partition@30000 { + devdata: partition@30000 { label = "devdata"; reg = <0x30000 0x10000>; read-only; }; - partition@40000 { + factory: partition@40000 { label = "devconf"; reg = <0x40000 0x10000>; read-only; @@ -57,24 +48,29 @@ }; ethernet@10100000 { - status = "okay"; + mtd-mac-address = <&devdata 0x4004>; }; esw@10110000 { - status = "okay"; ralink,portmap = <0x2f>; }; + wmac@10180000 { + ralink,mtd-eeprom = <&devdata 0x4000>; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; + reset { label = "reset"; gpios = <&gpio0 10 1>; linux,code = <0x198>; }; + wps { label = "wps"; gpios = <&gpio0 0 1>; @@ -82,28 +78,29 @@ }; }; - wmac@10180000 { - status = "okay"; - }; - gpio-leds { compatible = "gpio-leds"; + status { label = "d-link:amber:status"; gpios = <&gpio0 8 1>; }; + status2 { label = "d-link:green:status"; gpios = <&gpio0 9 1>; }; + wan { label = "d-link:amber:wan"; gpios = <&gpio0 14 1>; }; + wan2 { label = "d-link:green:wan"; gpios = <&gpio0 12 1>; }; + wps { label = "d-link:blue:wps"; gpios = <&gpio0 13 1>;