X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FDIR-300-B1.dts;h=e1962d54680f248bc22c00860274a285098dd210;hb=40f808600c9d1f821fa3d0eee34a52916415f69f;hp=8a5da5bb2f2bd357dfbb5b52d8647c44f4f74632;hpb=10d8e4b66c9f68de7889cc82bde7ed8ee01dfcd4;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/DIR-300-B1.dts b/target/linux/ramips/dts/DIR-300-B1.dts
index 8a5da5bb2f..e1962d5468 100644
--- a/target/linux/ramips/dts/DIR-300-B1.dts
+++ b/target/linux/ramips/dts/DIR-300-B1.dts
@@ -6,56 +6,71 @@
 	compatible = "DIR-300-B1", "ralink,rt3050-soc";
 	model = "D-Link DIR-300 B1";
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,3776k@0x50000(firmware)";
-	};
-
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
+				ralink,function = "gpio";
+			};
 		};
-
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-
 	};
 
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		devdata: partition@30000 {
+			label = "devdata";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "devconf";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
 	};
 
 	ethernet@10100000 {
-		status = "okay";
+		mtd-mac-address = <&devdata 0x4004>;
 	};
 
 	esw@10110000 {
-		status = "okay";
 		ralink,portmap = <0x2f>;
 	};
 
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&devdata 0x4000>;
+	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
 			linux,code = <0x198>;
 		};
+
 		wps {
 			label = "wps";
 			gpios = <&gpio0 0 1>;
@@ -63,28 +78,29 @@
 		};
 	};
 
-	wmac@10180000 {
-		status = "okay";
-	};
-
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		status {
 			label = "d-link:amber:status";
 			gpios = <&gpio0 8 1>;
 		};
+
 		status2 {
 			label = "d-link:green:status";
 			gpios = <&gpio0 9 1>;
 		};
+
 		wan {
 			label = "d-link:amber:wan";
 			gpios = <&gpio0 14 1>;
 		};
+
 		wan2 {
 			label = "d-link:green:wan";
 			gpios = <&gpio0 12 1>;
 		};
+
 		wps {
 			label = "d-link:blue:wps";
 			gpios = <&gpio0 13 1>;