X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FD105.dts;h=f7ace49f6285a7c2c19a884d2863e2f3223194db;hb=3d680c57286a2f77b9cfba275756c711730c7fe2;hp=de0f2a443a5f173e4b5e40d91e2e442d93a443ed;hpb=d16de0b69f70d395d4097e00613047ecf05d3d39;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ramips/dts/D105.dts b/target/linux/ramips/dts/D105.dts
index de0f2a443a..f7ace49f62 100644
--- a/target/linux/ramips/dts/D105.dts
+++ b/target/linux/ramips/dts/D105.dts
@@ -1,51 +1,53 @@
 /dts-v1/;
 
-/include/ "rt3050.dtsi"
+#include "rt3050.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
 	compatible = "D105", "ralink,rt3050-soc";
 	model = "Huawei D105";
 
-	memorydetect {
-		ralink,memory = <0x0 0x200000 0x4000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)";
-	};
-
-	palmbus@10000000 {
-		sysc@0 {
-			ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii";
-			ralink,gpiomux = "jtag";
-			ralink,uartmux = "gpio";
-			ralink,wdtmux = <1>;
-		};
-
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-
-	};
-
 	cfi@1f000000 {
 		compatible = "cfi-flash";
 		reg = <0x1f000000 0x800000>;
-
 		bank-width = <2>;
 		device-width = <2>;
 		#address-cells = <1>;
 		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x30000>;
+			read-only;
+		};
+
+		partition@30000 {
+			label = "u-boot-env";
+			reg = <0x30000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@40000 {
+			label = "factory";
+			reg = <0x40000 0x10000>;
+			read-only;
+		};
+
+		partition@50000 {
+			label = "firmware";
+			reg = <0x50000 0x3b0000>;
+		};
 	};
 
 	gpio-leds {
 		compatible = "gpio-leds";
+
 		power {
 			label = "d105:red:power";
 			gpios = <&gpio0 0 1>;
 		};
+
 		wps {
 			label = "d105:green:usb";
 			gpios = <&gpio0 13 1>;
@@ -57,27 +59,36 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		poll-interval = <20>;
+
 		reset {
 			label = "reset";
 			gpios = <&gpio0 10 1>;
-			linux,code = <0x198>;
+			linux,code = <KEY_RESTART>;
 		};
 	};
+};
 
-	ethernet@10100000 {
-		status = "okay";
+&pinctrl {
+	state_default: pinctrl0 {
+		gpio {
+			ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
+			ralink,function = "gpio";
+		};
 	};
+};
 
-	esw@10110000 {
-		status = "okay";
-		ralink,portmap = <0x2f>;
-	};
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+};
 
-	wmac@10180000 {
-		status = "okay";
-	};
+&esw {
+	mediatek,portmap = <0x2f>;
+};
 
-	otg@101c0000 {
-		status = "okay";
-	};
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&otg {
+	status = "okay";
 };