X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2FBROADWAY.dts;h=790dcc0467f2664dc10664540ee4fe658e0d4a11;hb=05912a304c1d3f31f350cd708fe4722389ec835a;hp=ce448e798ce3ef9bdaae6fa8fad6f99fe2cae16b;hpb=d16de0b69f70d395d4097e00613047ecf05d3d39;p=oweals%2Fopenwrt.git diff --git a/target/linux/ramips/dts/BROADWAY.dts b/target/linux/ramips/dts/BROADWAY.dts index ce448e798c..790dcc0467 100644 --- a/target/linux/ramips/dts/BROADWAY.dts +++ b/target/linux/ramips/dts/BROADWAY.dts @@ -1,61 +1,53 @@ /dts-v1/; -/include/ "rt3050.dtsi" +#include "rt3050.dtsi" / { - #address-cells = <1>; - #size-cells = <1>; compatible = "BROADWAY", "ralink,rt3052-soc"; model = "Hauppauge Broadway"; - memorydetect { - ralink,memory = <0x0 0x200000 0x4000000>; - }; - - chosen { - bootargs = "console=ttyS0,57600 mtdparts=1f000000.cfi:192k(bootloader)ro,64k(config)ro,64k(factory)ro,7744k@0x50000(firmware)"; - }; - - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - - }; - cfi@1f000000 { compatible = "cfi-flash"; reg = <0x1f000000 0x800000>; - bank-width = <2>; device-width = <2>; #address-cells = <1>; #size-cells = <1>; - }; - ethernet@10100000 { - status = "okay"; - }; + partition@0 { + label = "bootloader"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; - esw@10110000 { - status = "okay"; - ralink,portmap = <0x3e>; + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x790000>; + }; }; gpio-leds { compatible = "gpio-leds"; + diskmounted { - label = "red:diskmounted"; + label = "broadway:red:diskmounted"; gpios = <&gpio0 9 1>; }; + wps_active { - label = "red:wps_active"; + label = "broadway:red:wps_active"; gpios = <&gpio0 14 1>; }; }; @@ -65,18 +57,36 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; + factory { label = "Factory Reset button"; gpios = <&gpio0 13 1>; linux,code = <0x198>; }; }; +}; - wmac@10180000 { - status = "okay"; +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; +}; - otg@101c0000 { - status = "okay"; - }; +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&esw { + mediatek,portmap = <0x3e>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&otg { + status = "okay"; };