X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Framips%2Fdts%2F3G300M.dts;h=df770d83d5110b063b4ac0126a0cb06029a005ed;hb=a7c6cf5182a3b20afb1c98d0d79247d6a9bc104b;hp=f686cec93280f7f94993e65df8c7d9abafb5bc97;hpb=10d8e4b66c9f68de7889cc82bde7ed8ee01dfcd4;p=oweals%2Fopenwrt.git diff --git a/target/linux/ramips/dts/3G300M.dts b/target/linux/ramips/dts/3G300M.dts index f686cec932..df770d83d5 100644 --- a/target/linux/ramips/dts/3G300M.dts +++ b/target/linux/ramips/dts/3G300M.dts @@ -1,68 +1,41 @@ /dts-v1/; -/include/ "rt3050.dtsi" +#include "rt3050.dtsi" / { compatible = "3G300M", "ralink,rt3052-soc"; model = "Tenda 3G300M"; - memorydetect { - ralink,memory = <0x0 0x200000 0x4000000>; - }; - - chosen { - bootargs = "console=ttyS0,57600 mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,3776k@0x50000(firmware)"; - }; - - palmbus@10000000 { - sysc@0 { - ralink,pinmux = "i2c", "spi", "uartlite", "mdio", "sdram", "rgmii"; - ralink,gpiomux = "jtag"; - ralink,uartmux = "gpio"; - ralink,wdtmux = <1>; - }; - - gpio0: gpio@600 { - status = "okay"; - }; - - spi@b00 { - status = "okay"; - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l3205d"; - reg = <0 0>; - linux,modalias = "m25p80", "mx25l3205d"; - spi-max-frequency = <10000000>; - }; - }; - }; - gpio-leds { compatible = "gpio-leds"; + 3grouter { - label = "tenda:blue:3grouter"; + label = "3g300m:blue:3grouter"; gpios = <&gpio0 11 1>; }; + ap { - label = "tenda:blue:ap"; + label = "3g300m:blue:ap"; gpios = <&gpio0 12 1>; }; + wisprouter { - label = "tenda:blue:wisprouter"; + label = "3g300m:blue:wisprouter"; gpios = <&gpio0 9 1>; }; + wirelessrouter { - label = "tenda:blue:wirelessrouter"; + label = "3g300m:blue:wirelessrouter"; gpios = <&gpio0 13 1>; }; + 3g { - label = "tenda:blue:3g"; + label = "3g300m:blue:3g"; gpios = <&gpio0 7 1>; }; + wpsreset { - label = "tenda:blue:wpsreset"; + label = "3g300m:blue:wpsreset"; gpios = <&gpio0 14 1>; }; }; @@ -72,32 +45,78 @@ #address-cells = <1>; #size-cells = <0>; poll-interval = <20>; + reset { label = "reset"; gpios = <&gpio0 0 1>; linux,code = <0x198>; }; + mode { label = "mode"; gpios = <&gpio0 10 1>; linux,code = <0x100>; }; }; +}; - ethernet@10100000 { - status = "okay"; - }; +&spi0 { + status = "okay"; - esw@10110000 { - status = "okay"; - ralink,portmap = <0x2f>; - }; + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; - wmac@10180000 { - status = "okay"; + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; }; +}; - otg@101c0000 { - status = "okay"; +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf"; + ralink,function = "gpio"; + }; }; }; + +ðernet { + mtd-mac-address = <&factory 0x4>; +}; + +&esw { + mediatek,portmap = <0x2f>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&otg { + status = "okay"; +};