X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Flantiq%2Fdts%2FVG3503J.dts;h=b4b3cf5aece9263287f46998949ced3850dbf73f;hb=5f71dbb0054f245f9cadb6dfe99270ab8373bc54;hp=340bfaae45ef06ba3e6e2c827323a1a0e6f1e682;hpb=b42a17366485e434bbd0182ed2054951b17edd98;p=oweals%2Fopenwrt.git diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts index 340bfaae45..b4b3cf5aec 100644 --- a/target/linux/lantiq/dts/VG3503J.dts +++ b/target/linux/lantiq/dts/VG3503J.dts @@ -1,198 +1,11 @@ /dts-v1/; -/include/ "vr9.dtsi" +/include/ "VG3503J.dtsi" / { - model = "VG3503J - BT OpenReach VDSL Modem"; - - chosen { - bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; - }; - - memory@0 { - reg = <0x0 0x2000000>; - }; - - fpi@10000000 { - localbus@0 { - ranges = <0 0 0x0 0x3ffffff>; - nor-boot@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x20000>; - }; - - partition@20000 { - label = "kernel"; - reg = <0x20000 0x180000>; - }; - - partition@1a0000 { - label = "rootfs"; - reg = <0x1a0000 0x5a0000>; - }; - - partition@740000 { - label = "btagent"; - reg = <0x740000 0x80000>; - }; - - partition@7c0000 { - label = "pri_bfocus_cfg"; - reg = <0x7c0000 0x10000>; - }; - - partition@7d0000 { - label = "sec_bfocus_cfg"; - reg = <0x7d0000 0x10000>; - }; - - partition@7e0000 { - label = "sysconfig"; - reg = <0x7e0000 0x10000>; - }; - - partition@7f0000 { - label = "misc_cfg"; - reg = <0x7f0000 0x10000>; - }; - }; - }; - - gpio: pinmux@E100B10 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - mdio { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - }; - }; - - eth@E108000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-net"; - reg = < 0xE108000 0x3000 /* switch */ - 0xE10B100 0x70 /* mdio */ - 0xE10B1D8 0x30 /* mii */ - 0xE10B308 0x30 /* pmac */ - >; - interrupt-parent = <&icu0>; - interrupts = <73 72>; - - lan1: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,wan; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - }; - - lan2: interface@1 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - mac-address = [ 00 11 22 33 44 56 ]; - - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - }; - - mdio@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,c45-reg-init = <1 0 0 0>; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,c45-reg-init = <1 0 0 0>; - }; - }; - }; - }; - gphy-xrx200 { compatible = "lantiq,phy-xrx200"; firmware = "lantiq/vr9_phy22f_a1x.bin"; phys = [ 00 01 ]; }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 6 1>; - linux,code = <0x198>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - port2orange { - label = "bt:orange:port2"; - gpios = <&gpio 2 0>; - }; - lan2 { - label = "bt:green:lan2"; - gpios = <&gpio 5 0>; - }; - port2green { - label = "bt:green:port2"; - gpios = <&gpio 7 0>; - }; - power2 { - label = "power2"; - gpios = <&gpio 14 1>; - }; - dsl { - label = "bt:green:dsl"; - gpios = <&gpio 19 1>; - }; - power { - label = "power"; - gpios = <&gpio 28 1>; - }; - lan1 { - label = "bt:green:lan1"; - gpios = <&gpio 44 0>; - }; - port1green { - label = "bt:green:port1"; - gpios = <&gpio 45 0>; - }; - port1orange { - label = "bt:orange:port1"; - gpios = <&gpio 47 0>; - }; - }; };