X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Fqca9558_tplink_tl-wr1043nd.dtsi;h=61d4aec6243a15ff3cad94cdb8d7da15fd07f91b;hb=34b10b468e0999f1739931ae8faf7e8e1002c2e8;hp=a7dd8feb0b7dfe7e3471b0d287f6a947738faf9e;hpb=7b42247182805e6362e7797c8f2dba97419f5c8d;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
index a7dd8feb0b..61d4aec624 100644
--- a/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
+++ b/target/linux/ath79/dts/qca9558_tplink_tl-wr1043nd.dtsi
@@ -12,7 +12,10 @@
 	};
 
 	aliases {
-		led-status = &system;
+		led-boot = &system;
+		led-failsafe = &system;
+		led-running = &system;
+		led-upgrade = &system;
 	};
 
 	leds {
@@ -27,7 +30,6 @@
 		usb {
 			label = "tp-link:green:usb";
 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			trigger-sources = <&hub_port0>;
 			linux,default-trigger = "usbport";
 		};
@@ -35,21 +37,17 @@
 		wifi_green {
 			label = "tp-link:green:wlan";
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wifi_wps {
 			label = "tp-link:green:wps";
 			gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 	};
 
 	keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
 		reset {
 			label = "Reset button";
@@ -91,6 +89,8 @@
 };
 
 &usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port0: port@1 {
@@ -104,8 +104,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -122,6 +120,7 @@
 			};
 
 			partition@20000 {
+				compatible = "tplink,firmware";
 				label = "firmware";
 				reg = <0x020000 0x7d0000>;
 			};
@@ -157,6 +156,8 @@
 &eth0 {
 	status = "okay";
 
+	pll-data = <0x56000000 0x00000101 0x00001616>;
+
 	mtd-mac-address = <&uboot 0x1fc00>;
 	mtd-mac-address-increment = <1>;
 	phy-handle = <&phy0>;
@@ -165,6 +166,8 @@
 &eth1 {
 	status = "okay";
 
+	pll-data = <0x03000101 0x00000101 0x00001616>;
+
 	mtd-mac-address = <&uboot 0x1fc00>;
 
 	fixed-link {