X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Fqca9531_tplink_archer-d50-v1.dts;h=3aa6bd1367b0e24d3930bfe7f5262a5b4cf24d08;hb=635f111148c3f7ccb0ecc92863a3b1a142f6ebeb;hp=25c1d050da914536780981b2e426605fabab3a0a;hpb=f5d2c91415a68f554815860d574145644fc31c16;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts b/target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts
index 25c1d050da..3aa6bd1367 100644
--- a/target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts
+++ b/target/linux/ath79/dts/qca9531_tplink_archer-d50-v1.dts
@@ -10,26 +10,30 @@
 	compatible = "tplink,archer-d50-v1", "qca,qca9531";
 	model = "TP-Link Archer D50 v1";
 
-	chosen {
-		bootargs = "console=ttyS0,115200n8";
+	aliases {
+		led-boot = &led_system;
+		led-failsafe = &led_system;
+		led-running = &led_system;
+		led-upgrade = &led_system;
+		label-mac-device = &wmac;
 	};
 
-	gpio_leds: leds {
+	leds {
 		compatible = "gpio-leds";
 
-		led_wlan2g: wlan2g {
+		wlan2g {
 			label = "tp-link:white:wlan2g";
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};
 
-		led_wlan5g: wlan5g {
+		wlan5g {
 			label = "tp-link:white:wlan5g";
 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy1tpt";
-                };
+		};
 
-		qss_led: qss {
+		qss {
 			label = "tp-link:white:qss";
 			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
 		};
@@ -56,7 +60,7 @@
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		system: system{
+		led_system: system {
 			label = "tp-link:white:system";
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -103,7 +107,7 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			uboot:	partition@0 {
+			partition@0 {
 				label = "u-boot";
 				reg = <0x000000 0x020000>;
 				read-only;
@@ -148,6 +152,7 @@
 
 &eth0 {
 	status = "okay";
+
 	phy-handle = <&swphy4>;
 
 	mtd-mac-address = <&romfile 0xf100>;
@@ -156,6 +161,7 @@
 
 &wmac {
 	status = "okay";
+
 	mtd-cal-data = <&art 0x1000>;
 	mtd-mac-address = <&romfile 0xf100>;
 };