X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Far7242_tplink_tl-wr2543-v1.dts;h=c42207e6cffb2c3f20b574ace30c1a5d81929a20;hb=50674ccadee3edd07c8f8501907d207df3767a4e;hp=d7bb406ab099dd8ed63e88ed33f139a4b8fc3bbe;hpb=8288af1e18adfe68bc556df93521881d1e5d0eda;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts b/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
index d7bb406ab0..c42207e6cf 100644
--- a/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
+++ b/target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts
@@ -8,10 +8,13 @@
 
 / {
 	compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
-	model = "TP-LINK TL-WR2543N/ND";
+	model = "TP-Link TL-WR2543N/ND";
 
 	aliases {
-		led-status = &system;
+		led-boot = &system;
+		led-failsafe = &system;
+		led-running = &system;
+		led-upgrade = &system;
 	};
 
 	chosen {
@@ -24,10 +27,8 @@
 		clock-frequency = <40000000>;
 	};
 
-	gpio-keys {
+	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		poll-interval = <20>;
 
 		reset {
@@ -51,13 +52,11 @@
 		system: wps {
 			label = "tplink:green:wps";
 			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 		};
 
 		usb {
 			label = "tplink:green:usb";
 			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			trigger-sources = <&hub_port>;
 			linux,default-trigger = "usbport";
 		};
@@ -69,17 +68,14 @@
 		wlan2g {
 			label = "tplink:green:wlan2g";
 			gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			linux,default-trigger = "phy0tpt";
 		};
 
 		wlan5g {
 			label = "tplink:green:wlan5g";
 			gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
-			default-state = "off";
 			linux,default-trigger = "phy0tpt";
 		};
-
 	};
 
 	rtl8367 {
@@ -89,6 +85,8 @@
 		realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
 
 		mdio-bus {
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "okay";
 
 			phy0: ethernet-phy@0 {
@@ -107,8 +105,6 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
@@ -125,6 +121,7 @@
 			};
 
 			partition@20000 {
+				compatible = "tplink,firmware";
 				label = "firmware";
 				reg = <0x020000 0x7d0000>;
 			};
@@ -143,6 +140,8 @@
 };
 
 &usb {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
 
 	hub_port: port@1 {
@@ -158,7 +157,7 @@
 &pcie {
 	status = "okay";
 
-	ath9k: wifi@0 {
+	ath9k: wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		#gpio-cells = <2>;
 		gpio-controller;