X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Far7241_ubnt_xm.dtsi;h=546657522949d9d85bf68f10fc32a1a55cdf5bca;hb=6837c757cf4ac1b733c5d3124d196b6dd78b1acf;hp=bea9adc5d4cc6ce9d72950387cbe4e817953eb4a;hpb=0ff5785c5d5e57d99acb8da06d2c08903448b663;p=oweals%2Fopenwrt.git

diff --git a/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi b/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
index bea9adc5d4..5466575229 100644
--- a/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
+++ b/target/linux/ath79/dts/ar7241_ubnt_xm.dtsi
@@ -9,11 +9,6 @@
 	compatible = "ubnt,xm", "qca,ar7241";
 	model = "Ubiquiti Networks XM (rev 1.0) board";
 
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x2000000>;
-	};
-
 /*	extosc: ref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -22,40 +17,13 @@
 */
 	keys {
 		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		poll-interval = <20>;
-		button@0 {
-			label = "reset";
+		reset {
 			linux,code = <KEY_RESTART>;
 			gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 			debounce-interval = <60>;
 		};
 	};
-
-	leds {
-		compatible = "gpio-leds";
-		led@0 {
-			label = "ubnt:red:link1";
-			gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
-		};
-
-		led@1 {
-			label = "ubnt:orange:link2";
-			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
-		};
-
-		led@2 {
-			label = "ubnt:green:link3";
-			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
-		};
-
-		led@3 {
-			label = "ubnt:green:link4";
-			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
-		};
-	};
 };
 
 &uart {
@@ -71,9 +39,7 @@
 	num-cs = <1>;
 
 	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "mx25l6405d";
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <25000000>;
 
@@ -94,6 +60,7 @@
 			};
 
 			partition@2 {
+				compatible = "denx,uimage";
 				label = "firmware";
 				reg = <0x050000 0x750000>;
 			};
@@ -122,28 +89,16 @@
 &pcie {
 	status = "okay";
 
-	ath9k@0000 {
+	wifi@0,0 {
 		reg = <0x0000 0 0 0 0>;
 		qca,no-eeprom;
 	};
 };
 
-&mdio0 {
-	status = "okay";
-
-	phy4: ethernet-phy@4 {
-		reg = <4>;
-		phy-mode = "mii";
-	};
-};
-
 &eth0 {
 	status = "okay";
 
 	mtd-mac-address = <&art 0x0>;
-
-	phy-mode = "mii";
-	phy-handle = <&phy4>;
 };
 
 &eth1 {