X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Fath79%2Fdts%2Far7161_netgear_wndr3800.dts;h=589d0ec8401e4977a56381778fc200bd6b6c5700;hb=8de907c441db8a4aae746f44ee2c4651225d389f;hp=59b868480aae19c529df4d5f819fed36e0afde59;hpb=c463320812ea9aad329289a950e83bb6c43a8d58;p=oweals%2Fopenwrt.git diff --git a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts index 59b868480a..589d0ec840 100644 --- a/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts +++ b/target/linux/ath79/dts/ar7161_netgear_wndr3800.dts @@ -1,212 +1,36 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT /dts-v1/; -#include -#include - -#include "ar7100.dtsi" +#include "ar7161_netgear_wndr3700.dtsi" / { compatible = "netgear,wndr3800", "qca,ar7161"; model = "Netgear WNDR3800"; - - aliases { - led-status = &power_green; - }; - - chosen { - bootargs = "console=ttyS0,115200"; - }; - - extosc: ref { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-output-names = "ref"; - clock-frequency = <40000000>; - }; - - reset-leds { - compatible = "reset-leds"; - - usb_led { - label = "netgear:green:usb"; - resets = <&rst 12>; - trigger-sources = <&usb_ochi_port>, <&usb_echi_port>; - linux,default-trigger = "usbport"; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - wps { - label = "netgear:orange:wps"; - gpios = <&gpio 0 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - power_green: power_green { - label = "netgear:green:power"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - power_orange { - label = "netgear:orange:power"; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wps_green { - label = "netgear:green:wps"; - gpios = <&gpio 4 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - - wan_green { - label = "netgear:green:wan"; - gpios = <&gpio 6 GPIO_ACTIVE_LOW>; - default-state = "off"; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - - wps { - label = "wps"; - linux,code = ; - gpios = <&gpio 3 GPIO_ACTIVE_LOW>; - }; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio 8 GPIO_ACTIVE_LOW>; - }; - - rfkill { - label = "rfkill"; - linux,code = ; - gpios = <&gpio 11 GPIO_ACTIVE_LOW>; - }; - }; - - rtl8366s { - compatible = "realtek,rtl8366s"; - gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>; - gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>; - - mdio-bus { - status = "okay"; - - phy-mask = <0x10>; - - phy4: ethernet-phy@4 { - reg = <4>; - phy-mode = "rgmii"; - }; - }; - }; -}; - -&usb_phy { - status = "okay"; }; -&usb1 { - status = "okay"; - - usb_ochi_port: port@1 { - reg = <1>; - #trigger-source-cells = <0>; +&partitions { + partition@0 { + label = "u-boot"; + reg = <0x000000 0x050000>; + read-only; }; -}; - -&usb2 { - status = "okay"; - usb_echi_port: port@1 { - reg = <1>; - #trigger-source-cells = <0>; + partition@50000 { + label = "u-boot-env"; + reg = <0x050000 0x020000>; + read-only; }; -}; - -&pcie0 { - status = "okay"; -}; - -&uart { - status = "okay"; -}; - -&spi { - status = "okay"; - num-cs = <1>; - - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l12805d"; - reg = <0>; - spi-max-frequency = <25000000>; - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x050000>; - read-only; - }; - - partition@1 { - label = "u-boot-env"; - reg = <0x050000 0x020000>; - read-only; - }; - - partition@2 { - label = "firmware"; - reg = <0x070000 0xf80000>; - }; - - art: partition@3 { - label = "art"; - reg = <0xff0000 0x010000>; - read-only; - }; - }; + partition@70000 { + label = "firmware"; + reg = <0x070000 0xf80000>; + compatible = "netgear,uimage"; }; -}; - -ð0 { - status = "okay"; - - pll-data = <0x11110000 0x00001099 0x00991099>; - mtd-mac-address = <&art 0x00>; - - fixed-link { - speed = <1000>; - full-duplex; + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x010000>; + read-only; }; }; -ð1 { - status = "okay"; - - pll-data = <0x11110000 0x00001099 0x00991099>; - - mtd-mac-address = <&art 0x06>; - - resets = <&rst 13>; - reset-names = "mac"; - - phy-handle = <&phy4>; -};