X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=target%2Flinux%2Fat91%2Fimage%2FConfig.in;h=54a501dcb30d9ccf97dc8118fb4532808d35761a;hb=c8753ca97c50523f721e5fa8507768c6dc16ef49;hp=f6714c131920150fa93f680cee4bdaaa0026272b;hpb=a6cda9c4bc591b08e58ab8adf0c7b5a2a8ff1965;p=oweals%2Fopenwrt.git diff --git a/target/linux/at91/image/Config.in b/target/linux/at91/image/Config.in index f6714c1319..54a501dcb3 100644 --- a/target/linux/at91/image/Config.in +++ b/target/linux/at91/image/Config.in @@ -1,35 +1,37 @@ config AT91_DFBOOT bool "Build dataflashboot loader" - depends TARGET_at91 - default y + depends on TARGET_at91 + default n config AT91_UBOOT - bool "Build u-boot loader" - depends TARGET_at91 - default y + bool "Build U-Boot bootloader" + depends on TARGET_at91 + default n config UBOOT_TARGET - string "U-Boot Board Configuration" - depends TARGET_at91 - depends AT91_UBOOT - default "vlink" + string "U-Boot target board" + depends on AT91_UBOOT + default "netusg20" help For all supported boards there are ready-to-use default configurations available; just type "". config UBOOT_IPADDR string "IP Address for U-Boot" - depends TARGET_at91 - depends AT91_UBOOT + depends on AT91_UBOOT default "192.168.0.178" help IP address of device to be used in U-Boot config UBOOT_SERVERIP string "IP Address of TFTP server" - depends TARGET_at91 - depends AT91_UBOOT + depends on AT91_UBOOT default "192.168.0.232" help IP address of TFTP server for U-Boot +config FLEXIBITY_ROOT + bool "Build Flexibity RootFS (with embedded kernel)" + depends on TARGET_at91_flexibity + default n +