X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=scripts%2FMakefile.spl;h=e6d56a1286f8833fbbc09a5824df761f21bbf6fc;hb=a0092cf236907e8ced652c9ef1fc5bfa7e6fdee7;hp=7f2908d7997d51d363157f0547f709e4aa4a439b;hpb=5512f5ccf1dc5cec068f8efa1d8ce81f51a988d3;p=oweals%2Fu-boot.git

diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 7f2908d799..e6d56a1286 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0+
 #
 # (C) Copyright 2000-2011
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -8,9 +9,6 @@
 # (C) Copyright 2011
 # Texas Instruments Incorporated - http://www.ti.com/
 # Aneesh V <aneesh@ti.com>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
 # Based on top-level Makefile.
 #
 
@@ -24,6 +22,8 @@ include $(srctree)/scripts/Kbuild.include
 -include include/config/auto.conf
 -include $(obj)/include/autoconf.mk
 
+UBOOTINCLUDE := -I$(obj)/include $(UBOOTINCLUDE)
+
 KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
 ifeq ($(CONFIG_TPL_BUILD),y)
 KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
@@ -47,6 +47,13 @@ SPL_ :=
 SPL_TPL_ :=
 endif
 
+ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
+$(error You cannot build SPL without enabling CONFIG_SUPPORT_SPL)
+endif
+ifeq ($(obj)$(CONFIG_SUPPORT_TPL),tpl)
+$(error You cannot build TPL without enabling CONFIG_SUPPORT_TPL)
+endif
+
 include $(srctree)/config.mk
 include $(srctree)/arch/$(ARCH)/Makefile
 
@@ -66,7 +73,11 @@ HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makef
 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 
+ifeq ($(CONFIG_TPL_BUILD),y)
+libs-$(CONFIG_TPL_FRAMEWORK) += common/spl/
+else
 libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
+endif
 libs-y += common/init/
 
 # Special handling for a few options which support SPL/TPL
@@ -76,11 +87,14 @@ libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
 else
 libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/ env/
 libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
+ifdef CONFIG_SPL_FRAMEWORK
+libs-$(CONFIG_PARTITIONS) += disk/
+endif
 endif
 
-libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
 libs-y += drivers/
-libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
+libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/dwc3/
+libs-$(CONFIG_SPL_USB_GADGET) += drivers/usb/cdns3/
 libs-y += dts/
 libs-y += fs/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
@@ -140,12 +154,25 @@ LDPPFLAGS += \
 	$(shell $(LD) --version | \
 	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 
+# Turn various CONFIG symbols into IMAGE symbols for easy reuse of
+# the scripts between SPL and TPL.
+ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),)
+LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE)
+endif
+ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
+LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(SPL_TPL_)TEXT_BASE)
+endif
+
 MKIMAGEOUTPUT ?= /dev/null
 
 quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 	>$(MKIMAGEOUTPUT) $(if $(KBUILD_VERBOSE:0=), && cat $(MKIMAGEOUTPUT))
 
+quiet_cmd_mkfitimage = MKIMAGE $@
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(SPL_ITS) -E $@ \
+	$(if $(KBUILD_VERBOSE:1=), MKIMAGEOUTPUT)
+
 MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
 
 MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
@@ -159,21 +186,30 @@ MKIMAGEFLAGS_boot.bin = -T atmelimage
 ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
 MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
 
-boot.bin: $(obj)/../tools/atmel_pmecc_params
+$(obj)/boot.bin: $(obj)/../tools/atmel_pmecc_params
 endif
 
-boot.bin: $(obj)/u-boot-spl.bin FORCE
+$(obj)/boot.bin: $(obj)/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 else
 ifdef CONFIG_ARCH_ZYNQ
 MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
 endif
 ifdef CONFIG_ARCH_ZYNQMP
+ifneq ($(CONFIG_PMUFW_INIT_FILE),"")
+spl/boot.bin: zynqmp-check-pmufw
+zynqmp-check-pmufw: FORCE
+	( cd $(srctree) && test -r $(CONFIG_PMUFW_INIT_FILE) ) \
+		|| ( echo "Cannot read $(CONFIG_PMUFW_INIT_FILE)" && false )
+endif
 MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE) \
-	-n $(srctree)/$(CONFIG_PMUFW_INIT_FILE)
+	-n "$(shell cd $(srctree); readlink -f $(CONFIG_PMUFW_INIT_FILE))"
 endif
 
-spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
+$(obj)/$(SPL_BIN)-align.bin: $(obj)/$(SPL_BIN).bin
+	@dd if=$< of=$@ conv=block,sync bs=4 2>/dev/null;
+
+spl/boot.bin: $(obj)/$(SPL_BIN)-align.bin FORCE
 	$(call if_changed,mkimage)
 endif
 
@@ -183,7 +219,7 @@ ifdef CONFIG_SAMSUNG
 ALL-y	+= $(obj)/$(BOARD)-spl.bin
 endif
 
-ifdef CONFIG_ARCH_SOCFPGA
+ifneq ($(CONFIG_TARGET_SOCFPGA_GEN5)$(CONFIG_TARGET_SOCFPGA_ARRIA10),)
 ALL-y	+= $(obj)/$(SPL_BIN).sfp
 endif
 
@@ -196,14 +232,22 @@ endif
 endif
 
 ifeq ($(CONFIG_SYS_SOC),"at91")
-ALL-y	+= boot.bin
+ALL-y	+= $(obj)/boot.bin
 endif
 
-ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin
+ifdef CONFIG_TPL_BUILD
+ALL-$(CONFIG_TPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-tpl.bin \
+	$(obj)/u-boot-x86-reset16-tpl.bin
+else
+ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-start16-spl.bin \
+	$(obj)/u-boot-x86-reset16-spl.bin
+endif
 
 ALL-$(CONFIG_ARCH_ZYNQ)		+= $(obj)/boot.bin
 ALL-$(CONFIG_ARCH_ZYNQMP)	+= $(obj)/boot.bin
 
+ALL-$(CONFIG_ARCH_MEDIATEK)	+= $(obj)/u-boot-spl-mtk.bin
+
 all:	$(ALL-y)
 
 quiet_cmd_cat = CAT     $@
@@ -222,8 +266,20 @@ else
 FINAL_DTB_CONTAINER = $(obj)/$(SPL_BIN).multidtb.fit
 endif
 
+# Build the .dtb file if:
+#   - we are not using OF_PLATDATA
+#   - we are using OF_CONTROL
+#   - we have either OF_SEPARATE or OF_HOSTFILE
+build_dtb :=
+ifeq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA),)
+ifneq ($(CONFIG_$(SPL_TPL_)OF_CONTROL),)
+ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_OF_HOSTFILE),y)
+build_dtb := y
+endif
+endif
+endif
 
-ifeq ($(CONFIG_$(SPL_TPL_)OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_$(SPL_TPL_)OF_PLATDATA),yy)
+ifneq ($(build_dtb),)
 $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
 		$(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
 		$(FINAL_DTB_CONTAINER)  FORCE
@@ -253,10 +309,11 @@ quiet_cmd_dtoch = DTOC H  $@
 cmd_dtoch = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ struct
 
 quiet_cmd_plat = PLAT    $@
-cmd_plat = $(CC) $(c_flags) -c $< -o $@
+cmd_plat = $(CC) $(c_flags) -c $< -o $(filter-out $(PHONY),$@)
 
+targets += $(obj)/dts/dt-platdata.o
 $(obj)/dts/dt-platdata.o: $(obj)/dts/dt-platdata.c \
-		include/generated/dt-structs-gen.h
+		include/generated/dt-structs-gen.h prepare FORCE
 	$(call if_changed,plat)
 
 PHONY += dts_dir
@@ -285,13 +342,25 @@ quiet_cmd_objcopy = OBJCOPY $@
 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 
 OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
-		$(if $(CONFIG_SPL_X86_16BIT_INIT),-R .start16 -R .resetvec)
+		$(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec)
 
 $(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
 	$(call if_changed,objcopy)
 
-OBJCOPYFLAGS_u-boot-x86-16bit-spl.bin := -O binary -j .start16 -j .resetvec
-$(obj)/u-boot-x86-16bit-spl.bin: $(obj)/u-boot-spl FORCE
+OBJCOPYFLAGS_u-boot-x86-start16-spl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-spl.bin: $(obj)/u-boot-spl FORCE
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-start16-tpl.bin := -O binary -j .start16
+$(obj)/u-boot-x86-start16-tpl.bin: $(obj)/u-boot-tpl FORCE
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-spl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-spl.bin: $(obj)/u-boot-spl FORCE
+	$(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot-x86-reset16-tpl.bin := -O binary -j .resetvec
+$(obj)/u-boot-x86-reset16-tpl.bin: $(obj)/u-boot-tpl FORCE
 	$(call if_changed,objcopy)
 
 LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
@@ -299,17 +368,16 @@ LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
 # Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
 LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
 
-# First try the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
+# Pick the best-match (i.e. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
 ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
 LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE)
-else
-# And then fall back to just testing for SPL_TEXT_BASE, even if in TPL mode
-ifneq ($(CONFIG_SPL_TEXT_BASE),)
-LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
-endif
 endif
 
+ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
+MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage_v1
+else
 MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
+endif
 $(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
 	$(call if_changed,mkimage)
 
@@ -330,10 +398,19 @@ cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
 $(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
 	$(call if_changed,sunxi_spl_image_builder)
 
+
+# MediaTek's specific SPL build
+MKIMAGEFLAGS_u-boot-spl-mtk.bin = -T mtk_image \
+	-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) \
+	-n "$(patsubst "%",%,$(CONFIG_MTK_BROM_HEADER_INFO))"
+
+$(obj)/u-boot-spl-mtk.bin: $(obj)/u-boot-spl.bin FORCE
+	$(call if_changed,mkimage)
+
 # Rule to link u-boot-spl
 # May be overridden by arch/$(ARCH)/config.mk
 quiet_cmd_u-boot-spl ?= LD      $@
-      cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+      cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(KBUILD_LDFLAGS) $(LDFLAGS_$(@F)) \
 		       $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
 		       $(patsubst $(obj)/%,%,$(u-boot-spl-main))  \
 		       $(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
@@ -347,12 +424,16 @@ $(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
 $(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
 
 PHONY += $(u-boot-spl-dirs)
-$(u-boot-spl-dirs): $(u-boot-spl-platdata)
+$(u-boot-spl-dirs): $(u-boot-spl-platdata) prepare
 	$(Q)$(MAKE) $(build)=$@
 
+PHONY += prepare
+prepare:
+	$(Q)$(MAKE) $(build)=$(obj)/.
+
 quiet_cmd_cpp_lds = LDS     $@
 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
-		-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
+		-D__ASSEMBLY__ -x assembler-with-cpp -std=c99 -P -o $@ $<
 
 $(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
 	$(call if_changed_dep,cpp_lds)
@@ -378,20 +459,32 @@ dtbs:
 # information in a variable so we can use it in if_changed and friends.
 .PHONY: $(PHONY)
 
-SHRUNK_ARCH_DTB = $(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
+SPL_OF_LIST_TARGETS = $(patsubst %,dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST)))
+SHRUNK_ARCH_DTB = $(addprefix $(obj)/,$(SPL_OF_LIST_TARGETS))
 .SECONDEXPANSION:
-$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@)
+$(SHRUNK_ARCH_DTB): $$(patsubst $(obj)/dts/%, arch/$(ARCH)/dts/%, $$@) dts_dir
 	$(call if_changed,fdtgrep)
 
+targets += $(SPL_OF_LIST_TARGETS)
+
 MKIMAGEFLAGS_$(SPL_BIN).multidtb.fit = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
 	-n "Multi DTB fit image for $(SPL_BIN)" -E \
 	$(patsubst %,-b %,$(SHRUNK_ARCH_DTB))
 
 $(obj)/$(SPL_BIN).multidtb.fit: /dev/null $(SHRUNK_ARCH_DTB) FORCE
 	$(call if_changed,mkimage)
+ifneq ($(SOURCE_DATE_EPOCH),)
+	touch -d @$(SOURCE_DATE_EPOCH) $(obj)/$(SPL_BIN).multidtb.fit
+	chmod 0600 $(obj)/$(SPL_BIN).multidtb.fit
+endif
 
 $(obj)/$(SPL_BIN).multidtb.fit.gz: $(obj)/$(SPL_BIN).multidtb.fit
 	@gzip -kf9 $< > $@
 
 $(obj)/$(SPL_BIN).multidtb.fit.lzo: $(obj)/$(SPL_BIN).multidtb.fit
 	@lzop -f9 $< > $@
+
+ifdef CONFIG_ARCH_K3
+tispl.bin: $(obj)/u-boot-spl-nodtb.bin $(SHRUNK_ARCH_DTB) $(SPL_ITS) FORCE
+	$(call if_changed,mkfitimage)
+endif