X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=package%2Fnetwork%2Fservices%2Fhostapd%2Ffiles%2Fwpa_supplicant-full.config;h=10b4d15ea284ab7156292c16c757feb837cdff87;hb=8af79550e6c280717660f66032d89d21007b15d2;hp=55b31a345bfc668bc341b1137347699c14e9ac97;hpb=4b93b03577cefeed39fb6cadc7aa85706deeb074;p=oweals%2Fopenwrt.git

diff --git a/package/network/services/hostapd/files/wpa_supplicant-full.config b/package/network/services/hostapd/files/wpa_supplicant-full.config
index 55b31a345b..10b4d15ea2 100644
--- a/package/network/services/hostapd/files/wpa_supplicant-full.config
+++ b/package/network/services/hostapd/files/wpa_supplicant-full.config
@@ -109,9 +109,6 @@ CONFIG_EAP_PEAP=y
 CONFIG_EAP_TTLS=y
 
 # EAP-FAST
-# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
-# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
-# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
 CONFIG_EAP_FAST=y
 
 # EAP-GTC
@@ -235,6 +232,9 @@ CONFIG_CTRL_IFACE=y
 # wpa_passphrase). This saves about 0.5 kB in code size.
 #CONFIG_NO_WPA_PASSPHRASE=y
 
+# Simultaneous Authentication of Equals (SAE), WPA3-Personal
+#CONFIG_SAE=y
+
 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
 # This can be used if ap_scan=1 mode is never enabled.
 #CONFIG_NO_SCAN_PROCESSING=y
@@ -301,6 +301,9 @@ CONFIG_BACKEND=file
 # Driver support is also needed for IEEE 802.11w.
 #CONFIG_IEEE80211W=y
 
+# Support Operating Channel Validation
+#CONFIG_OCV=y
+
 # Select TLS implementation
 # openssl = OpenSSL (default)
 # gnutls = GnuTLS
@@ -349,10 +352,6 @@ CONFIG_INTERNAL_LIBTOMMATH_FAST=y
 #CONFIG_NDIS_EVENTS_INTEGRATED=y
 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
 
-# Add support for old DBus control interface
-# (fi.epitest.hostap.WPASupplicant)
-#CONFIG_CTRL_IFACE_DBUS=y
-
 # Add support for new DBus control interface
 # (fi.w1.hostap.wpa_supplicant1)
 #CONFIG_CTRL_IFACE_DBUS_NEW=y
@@ -388,9 +387,9 @@ CONFIG_IEEE80211R=y
 #CONFIG_DEBUG_FILE=y
 
 # Send debug messages to syslog instead of stdout
-#CONFIG_DEBUG_SYSLOG=y
+CONFIG_DEBUG_SYSLOG=y
 # Set syslog facility for debug messages
-#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
+CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON
 
 # Add support for sending all debug messages (regardless of debug verbosity)
 # to the Linux kernel tracing facility. This helps debug the entire stack by
@@ -458,6 +457,11 @@ CONFIG_IEEE80211R=y
 # that meet the requirements described above.
 CONFIG_NO_RANDOM_POOL=y
 
+# Should we attempt to use the getrandom(2) call that provides more reliable
+# yet secure randomness source than /dev/random on Linux 3.17 and newer.
+# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
+#CONFIG_GETRANDOM=y
+
 # IEEE 802.11n (High Throughput) support (mainly for AP mode)
 #CONFIG_IEEE80211N=y
 
@@ -499,8 +503,8 @@ CONFIG_WNM=y
 # Enable TDLS support
 #CONFIG_TDLS=y
 
-# Wi-Fi Direct
-# This can be used to enable Wi-Fi Direct extensions for P2P using an external
+# Wi-Fi Display
+# This can be used to enable Wi-Fi Display extensions for P2P using an external
 # program to control the additional information exchanges in the messages.
 #CONFIG_WIFI_DISPLAY=y
 
@@ -561,8 +565,6 @@ CONFIG_WNM=y
 #CONFIG_MBO=y
 
 # Fast Initial Link Setup (FILS) (IEEE 802.11ai)
-# Note: This is an experimental and not yet complete implementation. This
-# should not be enabled for production use.
 #CONFIG_FILS=y
 # FILS shared key authentication with PFS
 #CONFIG_FILS_SK_PFS=y
@@ -593,3 +595,13 @@ CONFIG_IBSS_RSN=y
 # Opportunistic Wireless Encryption (OWE)
 # Experimental implementation of draft-harkins-owe-07.txt
 #CONFIG_OWE=y
+
+# Device Provisioning Protocol (DPP)
+# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
+# wpa_supplicant/README-DPP for details)
+#CONFIG_DPP=y
+
+# uBus IPC/RPC System
+# Services can connect to the bus and provide methods
+# that can be called by other services or clients.
+CONFIG_UBUS=y