X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=package%2Fbroadcom-wl%2Ffiles%2Flib%2Fwifi%2Fbroadcom.sh;h=7d56c10e00afc25dbcd732919debdb0438019ceb;hb=a42072ddf48fbca02b16433c6cf6d841b432198a;hp=5ea82a1b8f13753d6664bc005bbcbc51f01afc01;hpb=1bdd7d046004f7526ac42ebba3b3c2b6fd6974ea;p=librecmc%2Flibrecmc.git

diff --git a/package/broadcom-wl/files/lib/wifi/broadcom.sh b/package/broadcom-wl/files/lib/wifi/broadcom.sh
index 5ea82a1b8f..7d56c10e00 100644
--- a/package/broadcom-wl/files/lib/wifi/broadcom.sh
+++ b/package/broadcom-wl/files/lib/wifi/broadcom.sh
@@ -5,10 +5,12 @@ scan_broadcom() {
 	local wds
 	local adhoc sta apmode mon
 	local adhoc_if sta_if ap_if mon_if
+	local _c=0
 
 	config_get vifs "$device" vifs
 	for vif in $vifs; do
 		config_get mode "$vif" mode
+		_c=$(($_c + 1))
 		case "$mode" in
 			adhoc)
 				adhoc=1
@@ -53,7 +55,11 @@ scan_broadcom() {
 
 	ap=1
 	infra=1
-	mssid=1
+	if [ "$_c" -gt 1 ]; then
+		mssid=1
+	else
+		mssid=
+	fi
 	apsta=0
 	radio=1
 	monitor=0
@@ -111,12 +117,14 @@ enable_broadcom() {
 	config_get vifs "$device" vifs
 	config_get distance "$device" distance
 	config_get slottime "$device" slottime
-	config_get rxant "$device" rxant
-	config_get txant "$device" txant
+	config_get rxantenna "$device" rxantenna
+	config_get txantenna "$device" txantenna
 	config_get_bool frameburst "$device" frameburst
 	config_get macfilter "$device" macfilter
 	config_get maclist "$device" maclist
-	local vif_pre_up vif_post_up vif_do_up
+	config_get macaddr "$device" macaddr
+	config_get txpower "$device" txpower
+	local vif_pre_up vif_post_up vif_do_up vif_txpower
 
 	_c=0
 	nas="$(which nas)"
@@ -145,6 +153,8 @@ enable_broadcom() {
 	esac
 
 	for vif in $vifs; do
+		config_get vif_txpower "$vif" txpower
+
 		config_get mode "$vif" mode
 		append vif_pre_up "vif $_c" "$N"
 		append vif_post_up "vif $_c" "$N"
@@ -189,6 +199,7 @@ enable_broadcom() {
 				case "$enc" in
 					wpa*+wpa2*|WPA*+WPA2*|*psk+*psk2|*PSK+*PSK2) auth=132; wsec=6;;
 					wpa2*|WPA2*|*PSK2|*psk2) auth=128; wsec=4;;
+					*aes|*AES) auth=4; wsec=4;;
 					*) auth=4; wsec=2;;
 				esac
 				eval "${vif}_key=\"\$key\""
@@ -223,17 +234,26 @@ enable_broadcom() {
 			append vif_post_up "monitor $monitor" "$N"
 			append vif_post_up "passive $passive" "$N"
 		}
+
+		[ "$mode" = "adhoc" ] && {
+			config_get bssid "$vif" bssid
+			[ -n "$bssid" ] && {
+				append vif_pre_up "des_bssid $bssid" "$N"
+				append vif_pre_up "allow_mode 1" "$N"
+			}
+		} || append vif_pre_up "allow_mode 0" "$N"
 		
 		append vif_post_up "enabled 1" "$N"
 		
 		config_get ifname "$vif" ifname
 		#append if_up "ifconfig $ifname up" ";$N"
+
 		local net_cfg bridge
 		net_cfg="$(find_net_config "$vif")"
 		[ -z "$net_cfg" ] || {
 			bridge="$(bridge_interface "$net_cfg")"
-			append if_up "start_net '$ifname' '$net_cfg'" ";$N"
 			append if_up "set_wifi_up '$vif' '$ifname'" ";$N"
+			append if_up "start_net '$ifname' '$net_cfg' \$(wlc ifname '$ifname' bssid)" ";$N"
 		}
 		[ -z "$nasopts" ] || {
 			eval "${vif}_ssid=\"\$ssid\""
@@ -256,15 +276,15 @@ enable_broadcom() {
 	wlc stdin <<EOF
 $ifdown
 
+apsta $apsta
 ap $ap
 ${mssid:+mssid $mssid}
-apsta $apsta
 infra $infra
 ${wet:+wet 1}
 802.11d 0
 802.11h 0
-rxant ${rxant:-3}
-txant ${txant:-3}
+rxant ${rxantenna:-3}
+txant ${txantenna:-3}
 monitor ${monitor:-0}
 passive ${passive:-0}
 
@@ -287,6 +307,12 @@ EOF
 	wlc stdin <<EOF
 $vif_do_up
 EOF
+
+	# use vif_txpower (from last wifi-iface) instead of txpower (from
+	# wifi-device) if the latter does not exist
+	txpower=${txpower:-$vif_txpower}
+	[ -z "$txpower" ] || iwconfig $device txpower ${txpower}dBm
+
 	eval "$nas_cmd"
 }