X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=networking%2Fslattach.c;h=9267eb1d0f30da8763774ebcb099e5634f6dd505;hb=89193f985bf50af702e0f98a3c86573277c03287;hp=02ecb5e9fc87f5f2f28b755ce670f9336716afcc;hpb=7049ff8696c3c2a1be0f9901d7e2473568b8f918;p=oweals%2Fbusybox.git

diff --git a/networking/slattach.c b/networking/slattach.c
index 02ecb5e9f..9267eb1d0 100644
--- a/networking/slattach.c
+++ b/networking/slattach.c
@@ -4,7 +4,7 @@
  *
  * Author: Ignacio Garcia Perez (iggarpe at gmail dot com)
  *
- * License: GPLv2 or later, see LICENSE file in this tarball.
+ * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  *
  * There are some differences from the standard net-tools slattach:
  *
@@ -12,20 +12,45 @@
  *
  * - The -F options allows disabling of RTS/CTS flow control.
  */
+//config:config SLATTACH
+//config:	bool "slattach"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  slattach is a small utility to attach network interfaces to serial
+//config:	  lines.
+
+//applet:IF_SLATTACH(APPLET(slattach, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_SLATTACH) += slattach.o
+
+//usage:#define slattach_trivial_usage
+//usage:       "[-cehmLF] [-s SPEED] [-p PROTOCOL] DEVICE"
+//usage:#define slattach_full_usage "\n\n"
+//usage:       "Attach network interface(s) to serial line(s)\n"
+//usage:     "\n	-p PROT	Set protocol (slip, cslip, slip6, clisp6 or adaptive)"
+//usage:     "\n	-s SPD	Set line speed"
+//usage:     "\n	-e	Exit after initializing device"
+//usage:     "\n	-h	Exit when the carrier is lost"
+//usage:     "\n	-c PROG	Run PROG when the line is hung up"
+//usage:     "\n	-m	Do NOT initialize the line in raw 8 bits mode"
+//usage:     "\n	-L	Enable 3-wire operation"
+//usage:     "\n	-F	Disable RTS/CTS flow control"
 
 #include "libbb.h"
-#include "libiproute/utils.h" /* invarg() */
+#include "common_bufsiz.h"
+#include "libiproute/utils.h" /* invarg_1_to_2() */
 
 struct globals {
 	int handle;
 	int saved_disc;
 	struct termios saved_state;
-};
-#define G (*(struct globals*)&bb_common_bufsiz1)
+} FIX_ALIASING;
+#define G (*(struct globals*)bb_common_bufsiz1)
 #define handle       (G.handle      )
 #define saved_disc   (G.saved_disc  )
 #define saved_state  (G.saved_state )
-#define INIT_G() do { } while (0)
+#define INIT_G() do { setup_common_bufsiz(); } while (0)
 
 
 /*
@@ -64,7 +89,7 @@ static int set_termios_state_or_warn(struct termios *state)
  * Go on after errors: we want to restore as many controlled ttys
  * as possible.
  */
-static void restore_state_and_exit(int exitcode) ATTRIBUTE_NORETURN;
+static void restore_state_and_exit(int exitcode) NORETURN;
 static void restore_state_and_exit(int exitcode)
 {
 	struct termios state;
@@ -114,13 +139,13 @@ static void set_state(struct termios *state, int encap)
 	}
 }
 
-static void sig_handler(int signo ATTRIBUTE_UNUSED)
+static void sig_handler(int signo UNUSED_PARAM)
 {
 	restore_state_and_exit(EXIT_SUCCESS);
 }
 
 int slattach_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
-int slattach_main(int argc ATTRIBUTE_UNUSED, char **argv)
+int slattach_main(int argc UNUSED_PARAM, char **argv)
 {
 	/* Line discipline code table */
 	static const char proto_names[] ALIGN1 =
@@ -134,9 +159,9 @@ int slattach_main(int argc ATTRIBUTE_UNUSED, char **argv)
 	int i, encap, opt;
 	struct termios state;
 	const char *proto = "cslip";
-	const char *extcmd;				/* Command to execute after hangup */
+	const char *extcmd;   /* Command to execute after hangup */
 	const char *baud_str;
-	int baud_code = -1;				/* Line baud rate (system code) */
+	int baud_code = -1;   /* Line baud rate (system code) */
 
 	enum {
 		OPT_p_proto  = 1 << 0,
@@ -162,7 +187,7 @@ int slattach_main(int argc ATTRIBUTE_UNUSED, char **argv)
 	encap = index_in_strings(proto_names, proto);
 
 	if (encap < 0)
-		invarg(proto, "protocol");
+		invarg_1_to_2(proto, "protocol");
 	if (encap > 3)
 		encap = 8;
 
@@ -170,7 +195,7 @@ int slattach_main(int argc ATTRIBUTE_UNUSED, char **argv)
 	if (opt & OPT_s_baud) {
 		baud_code = tty_value_to_baud(xatoi(baud_str));
 		if (baud_code < 0)
-			invarg(baud_str, "baud rate");
+			invarg_1_to_2(baud_str, "baud rate");
 	}
 
 	/* Trap signals in order to restore tty states upon exit */
@@ -206,6 +231,8 @@ int slattach_main(int argc ATTRIBUTE_UNUSED, char **argv)
 		state.c_cflag = CS8 | HUPCL | CREAD
 		              | ((opt & OPT_L_local) ? CLOCAL : 0)
 		              | ((opt & OPT_F_noflow) ? 0 : CRTSCTS);
+		cfsetispeed(&state, cfgetispeed(&saved_state));
+		cfsetospeed(&state, cfgetospeed(&saved_state));
 	}
 
 	if (opt & OPT_s_baud) {