X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=mkconfig;h=84f5a7765b94b9bad19c8c345861d3253bd193f1;hb=c23154aab5825fec81d5500c53eaa686646c76b5;hp=2fda1d4c416032f41f6fed997a6aaf4356dc8c40;hpb=d24f2d321d8e78e990d100000d8efc4845c78b1c;p=oweals%2Fu-boot.git

diff --git a/mkconfig b/mkconfig
index 2fda1d4c41..84f5a7765b 100755
--- a/mkconfig
+++ b/mkconfig
@@ -5,7 +5,9 @@
 #
 # Parameters:  Target  Architecture  CPU  Board [VENDOR] [SOC]
 #
-# (C) 2002-2010 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
+# (C) 2002-2013 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
+#
+# SPDX-License-Identifier:	GPL-2.0+
 #
 
 APPEND=no	# Default: Create new config file
@@ -21,10 +23,11 @@ options=""
 
 if [ \( $# -eq 2 \) -a \( "$1" = "-A" \) ] ; then
 	# Automatic mode
-	line=`egrep -i "^[[:space:]]*${2}[[:space:]]" boards.cfg` || {
+	line=`awk '($0 !~ /^#/ && $7 ~ /^'"$2"'$/) { print $1, $2, $3, $4, $5, $6, $7, $8 }' $srctree/boards.cfg`
+	if [ -z "$line" ] ; then
 		echo "make: *** No rule to make target \`$2_config'.  Stop." >&2
 		exit 1
-	}
+	fi
 
 	set ${line}
 	# add default board name if needed
@@ -35,43 +38,45 @@ while [ $# -gt 0 ] ; do
 	case "$1" in
 	--) shift ; break ;;
 	-a) shift ; APPEND=yes ;;
-	-n) shift ; BOARD_NAME="${1%_config}" ; shift ;;
+	-n) shift ; BOARD_NAME="${7%_config}" ; shift ;;
 	-t) shift ; TARGETS="`echo $1 | sed 's:_: :g'` ${TARGETS}" ; shift ;;
 	*)  break ;;
 	esac
 done
 
-[ $# -lt 4 ] && exit 1
-[ $# -gt 7 ] && exit 1
+[ $# -lt 7 ] && exit 1
+[ $# -gt 8 ] && exit 1
 
 # Strip all options and/or _config suffixes
-CONFIG_NAME="${1%_config}"
+CONFIG_NAME="${7%_config}"
 
-[ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}"
+[ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 
 arch="$2"
-cpu="$3"
-if [ "$4" = "-" ] ; then
-	board=${BOARD_NAME}
-else
-	board="$4"
+cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $1}'`
+spl_cpu=`echo $3 | awk 'BEGIN {FS = ":"} ; {print $2}'`
+
+if [ "$cpu" = "-" ] ; then
+	cpu=
 fi
-[ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
-[ $# -gt 5 ] && [ "$6" != "-" ] && soc="$6"
-[ $# -gt 6 ] && [ "$7" != "-" ] && {
+
+[ "$6" != "-" ] && board="$6"
+[ "$5" != "-" ] && vendor="$5"
+[ "$4" != "-" ] && soc="$4"
+[ $# -gt 7 ] && [ "$8" != "-" ] && {
 	# check if we have a board config name in the options field
 	# the options field mave have a board config name and a list
 	# of options, both separated by a colon (':'); the options are
 	# separated by commas (',').
 	#
 	# Check for board name
-	tmp="${7%:*}"
+	tmp="${8%:*}"
 	if [ "$tmp" ] ; then
 		CONFIG_NAME="$tmp"
 	fi
 	# Check if we only have a colon...
-	if [ "${tmp}" != "$7" ] ; then
-		options=${7#*:}
+	if [ "${tmp}" != "$8" ] ; then
+		options=${8#*:}
 		TARGETS="`echo ${options} | sed 's:,: :g'` ${TARGETS}"
 	fi
 }
@@ -81,6 +86,13 @@ if [ "${ARCH}" -a "${ARCH}" != "${arch}" ]; then
 	exit 1
 fi
 
+#
+# Test above needed aarch64, now we need arm
+#
+if [ "${arch}" = "aarch64" ]; then
+	arch="arm"
+fi
+
 if [ "$options" ] ; then
 	echo "Configuring for ${BOARD_NAME} - Board: ${CONFIG_NAME}, Options: ${options}"
 else
@@ -90,45 +102,45 @@ fi
 #
 # Create link to architecture specific headers
 #
-if [ "$SRCTREE" != "$OBJTREE" ] ; then
-	mkdir -p ${OBJTREE}/include
-	mkdir -p ${OBJTREE}/include2
-	cd ${OBJTREE}/include2
-	rm -f asm
-	ln -s ${SRCTREE}/arch/${arch}/include/asm asm
-	LNPREFIX=${SRCTREE}/arch/${arch}/include/asm/
-	cd ../include
-	rm -f asm
-	ln -s ${SRCTREE}/arch/${arch}/include/asm asm
+if [ -n "$KBUILD_SRC" ] ; then
+	mkdir -p ${objtree}/include
+	LNPREFIX=${srctree}/arch/${arch}/include/asm/
+	cd ${objtree}/include
+	mkdir -p asm
 else
-	cd ./include
-	rm -f asm
-	ln -s ../arch/${arch}/include/asm asm
+	cd arch/${arch}/include
 fi
 
 rm -f asm/arch
 
-if [ -z "${soc}" ] ; then
-	ln -s ${LNPREFIX}arch-${cpu} asm/arch
-else
+if [ "${soc}" ] ; then
 	ln -s ${LNPREFIX}arch-${soc} asm/arch
+elif [ "${cpu}" ] ; then
+	ln -s ${LNPREFIX}arch-${cpu} asm/arch
 fi
 
-if [ "${arch}" = "arm" ] ; then
-	rm -f asm/proc
-	ln -s ${LNPREFIX}proc-armv asm/proc
+if [ -z "$KBUILD_SRC" ] ; then
+	cd ${srctree}/include
 fi
 
 #
 # Create include file for Make
 #
-echo "ARCH   = ${arch}"  >  config.mk
-echo "CPU    = ${cpu}"   >> config.mk
-echo "BOARD  = ${board}" >> config.mk
-
-[ "${vendor}" ] && echo "VENDOR = ${vendor}" >> config.mk
-
-[ "${soc}"    ] && echo "SOC    = ${soc}"    >> config.mk
+( echo "ARCH   = ${arch}"
+    if [ ! -z "$spl_cpu" ] ; then
+	echo 'ifeq ($(CONFIG_SPL_BUILD),y)'
+	echo "CPU    = ${spl_cpu}"
+	echo "else"
+	echo "CPU    = ${cpu}"
+	echo "endif"
+    else
+	echo "CPU    = ${cpu}"
+    fi
+    echo "BOARD  = ${board}"
+
+    [ "${vendor}" ] && echo "VENDOR = ${vendor}"
+    [ "${soc}"    ] && echo "SOC    = ${soc}"
+    exit 0 ) > config.mk
 
 # Assign board directory to BOARDIR variable
 if [ -z "${vendor}" ] ; then
@@ -149,15 +161,26 @@ fi
 echo "/* Automatically generated - do not edit */" >>config.h
 
 for i in ${TARGETS} ; do
-	i="`echo ${i} | sed '/=/ {s/=/\t/;q } ; { s/$/\t1/ }'`"
+	i="`echo ${i} | sed '/=/ {s/=/	/;q; } ; { s/$/	1/; }'`"
 	echo "#define CONFIG_${i}" >>config.h ;
 done
 
+echo "#define CONFIG_SYS_ARCH  \"${arch}\""  >> config.h
+echo "#define CONFIG_SYS_CPU   \"${cpu}\""   >> config.h
+echo "#define CONFIG_SYS_BOARD \"${board}\"" >> config.h
+
+[ "${vendor}" ] && echo "#define CONFIG_SYS_VENDOR \"${vendor}\"" >> config.h
+
+[ "${soc}"    ] && echo "#define CONFIG_SYS_SOC    \"${soc}\""    >> config.h
+
+[ "${board}"  ] && echo "#define CONFIG_BOARDDIR board/$BOARDDIR" >> config.h
 cat << EOF >> config.h
-#define CONFIG_BOARDDIR board/$BOARDDIR
+#include <config_cmd_defaults.h>
 #include <config_defaults.h>
 #include <configs/${CONFIG_NAME}.h>
 #include <asm/config.h>
+#include <config_fallbacks.h>
+#include <config_uncmd_spl.h>
 EOF
 
 exit 0