X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=miscutils%2Fmt.c;h=6b31696757d796780fb019cb79047affa329e1af;hb=d6ace669737571c98977972b7392456f9e5156f6;hp=250856f05c29e1ea21b4a470af95ee389cfa6182;hpb=eba8ed71f08f334bc94ac8eeedcd998fcdd05897;p=oweals%2Fbusybox.git

diff --git a/miscutils/mt.c b/miscutils/mt.c
index 250856f05..6b3169675 100644
--- a/miscutils/mt.c
+++ b/miscutils/mt.c
@@ -1,97 +1,163 @@
 /* vi: set sw=4 ts=4: */
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <sys/mtio.h>
-#include <sys/fcntl.h>
-#include "busybox.h"
+/*
+ * Licensed under GPLv2 or later, see file LICENSE in this source tree.
+ */
+//config:config MT
+//config:	bool "mt"
+//config:	default y
+//config:	help
+//config:	  mt is used to control tape devices. You can use the mt utility
+//config:	  to advance or rewind a tape past a specified number of archive
+//config:	  files on the tape.
 
-struct mt_opcodes {
-	char *name;
-	short value;
-};
+//applet:IF_MT(APPLET(mt, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_MT) += mt.o
+
+//usage:#define mt_trivial_usage
+//usage:       "[-f device] opcode value"
+//usage:#define mt_full_usage "\n\n"
+//usage:       "Control magnetic tape drive operation\n"
+//usage:       "\n"
+//usage:       "Available Opcodes:\n"
+//usage:       "\n"
+//usage:       "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n"
+//usage:       "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n"
+//usage:       "ras3 reset retension rewind rewoffline seek setblk setdensity\n"
+//usage:       "setpart tell unload unlock weof wset"
+
+#include "libbb.h"
+#include <sys/mtio.h>
 
 /* missing: eod/seod, stoptions, stwrthreshold, densities */
-static const struct mt_opcodes opcodes[] = {
-	{"bsf", MTBSF},
-	{"bsfm", MTBSFM},
-	{"bsr", MTBSR},
-	{"bss", MTBSS},
-	{"datacompression", MTCOMPRESSION},
-	{"eom", MTEOM},
-	{"erase", MTERASE},
-	{"fsf", MTFSF},
-	{"fsfm", MTFSFM},
-	{"fsr", MTFSR},
-	{"fss", MTFSS},
-	{"load", MTLOAD},
-	{"lock", MTLOCK},
-	{"mkpart", MTMKPART},
-	{"nop", MTNOP},
-	{"offline", MTOFFL},
-	{"rewoffline", MTOFFL},
-	{"ras1", MTRAS1},
-	{"ras2", MTRAS2},
-	{"ras3", MTRAS3},
-	{"reset", MTRESET},
-	{"retension", MTRETEN},
-	{"rew", MTREW},
-	{"seek", MTSEEK},
-	{"setblk", MTSETBLK},
-	{"setdensity", MTSETDENSITY},
-	{"drvbuffer", MTSETDRVBUFFER},
-	{"setpart", MTSETPART},
-	{"tell", MTTELL},
-	{"wset", MTWSM},
-	{"unload", MTUNLOAD},
-	{"unlock", MTUNLOCK},
-	{"eof", MTWEOF},
-	{"weof", MTWEOF},
-	{0, 0}
+static const short opcode_value[] = {
+	MTBSF,
+	MTBSFM,
+	MTBSR,
+	MTBSS,
+	MTCOMPRESSION,
+	MTEOM,
+	MTERASE,
+	MTFSF,
+	MTFSFM,
+	MTFSR,
+	MTFSS,
+	MTLOAD,
+	MTLOCK,
+	MTMKPART,
+	MTNOP,
+	MTOFFL,
+	MTOFFL,
+	MTRAS1,
+	MTRAS2,
+	MTRAS3,
+	MTRESET,
+	MTRETEN,
+	MTREW,
+	MTSEEK,
+	MTSETBLK,
+	MTSETDENSITY,
+	MTSETDRVBUFFER,
+	MTSETPART,
+	MTTELL,
+	MTWSM,
+	MTUNLOAD,
+	MTUNLOCK,
+	MTWEOF,
+	MTWEOF
 };
 
-extern int mt_main(int argc, char **argv)
+static const char opcode_name[] ALIGN1 =
+	"bsf"             "\0"
+	"bsfm"            "\0"
+	"bsr"             "\0"
+	"bss"             "\0"
+	"datacompression" "\0"
+	"eom"             "\0"
+	"erase"           "\0"
+	"fsf"             "\0"
+	"fsfm"            "\0"
+	"fsr"             "\0"
+	"fss"             "\0"
+	"load"            "\0"
+	"lock"            "\0"
+	"mkpart"          "\0"
+	"nop"             "\0"
+	"offline"         "\0"
+	"rewoffline"      "\0"
+	"ras1"            "\0"
+	"ras2"            "\0"
+	"ras3"            "\0"
+	"reset"           "\0"
+	"retension"       "\0"
+	"rewind"          "\0"
+	"seek"            "\0"
+	"setblk"          "\0"
+	"setdensity"      "\0"
+	"drvbuffer"       "\0"
+	"setpart"         "\0"
+	"tell"            "\0"
+	"wset"            "\0"
+	"unload"          "\0"
+	"unlock"          "\0"
+	"eof"             "\0"
+	"weof"            "\0";
+
+int mt_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
+int mt_main(int argc UNUSED_PARAM, char **argv)
 {
 	const char *file = "/dev/tape";
-	const struct mt_opcodes *code = opcodes;
 	struct mtop op;
-	int fd;
-	
-	if (argc < 2) {
-		show_usage();
+	struct mtpos position;
+	int fd, mode, idx;
+
+	if (!argv[1]) {
+		bb_show_usage();
 	}
 
 	if (strcmp(argv[1], "-f") == 0) {
-		if (argc < 4) {
-			show_usage();
-		}
+		if (!argv[2] || !argv[3])
+			bb_show_usage();
 		file = argv[2];
 		argv += 2;
-		argc -= 2;
 	}
 
-	while (code->name != 0) {
-		if (strcmp(code->name, argv[1]) == 0)
+	idx = index_in_strings(opcode_name, argv[1]);
+
+	if (idx < 0)
+		bb_error_msg_and_die("unrecognized opcode %s", argv[1]);
+
+	op.mt_op = opcode_value[idx];
+	if (argv[2])
+		op.mt_count = xatoi_positive(argv[2]);
+	else
+		op.mt_count = 1;  /* One, not zero, right? */
+
+	switch (opcode_value[idx]) {
+		case MTWEOF:
+		case MTERASE:
+		case MTWSM:
+		case MTSETDRVBUFFER:
+			mode = O_WRONLY;
 			break;
-		code++;
-	}
 
-	if (code->name == 0) {
-		error_msg("unrecognized opcode %s.", argv[1]);
-		return EXIT_FAILURE;
+		default:
+			mode = O_RDONLY;
+			break;
 	}
 
-	op.mt_op = code->value;
-	if (argc >= 3)
-		op.mt_count = atoi(argv[2]);
-	else
-		op.mt_count = 1;		/* One, not zero, right? */
+	fd = xopen(file, mode);
 
-	if ((fd = open(file, O_RDONLY, 0)) < 0)
-		perror_msg_and_die("%s", file);
+	switch (opcode_value[idx]) {
+		case MTTELL:
+			ioctl_or_perror_and_die(fd, MTIOCPOS, &position, "%s", file);
+			printf("At block %d\n", (int) position.mt_blkno);
+			break;
 
-	if (ioctl(fd, MTIOCTOP, &op) != 0)
-		perror_msg_and_die("%s", file);
+		default:
+			ioctl_or_perror_and_die(fd, MTIOCTOP, &op, "%s", file);
+			break;
+	}
 
 	return EXIT_SUCCESS;
 }