X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=libbb%2Fhuman_readable.c;h=115fde7444fb013a14b1540fffcbc7d1fed073e4;hb=ddec5af6b0803c7434a1cc2fdee5cb9873fe6bd0;hp=ff2175175bb365f038a11f25a9de79d758b556a5;hpb=91c9388715182a71173f2da71d74173221460412;p=oweals%2Fbusybox.git

diff --git a/libbb/human_readable.c b/libbb/human_readable.c
index ff2175175..115fde744 100644
--- a/libbb/human_readable.c
+++ b/libbb/human_readable.c
@@ -1,62 +1,88 @@
 /* vi: set sw=4 ts=4: */
 /*
- * Utility routines.
+ * June 30, 2001                 Manuel Novoa III
  *
- * Copyright (C) tons of folks.  Tracking down who wrote what
- * isn't something I'm going to worry about...  If you wrote something
- * here, please feel free to acknowledge your work.
+ * All-integer version (hey, not everyone has floating point) of
+ * make_human_readable_str, modified from similar code I had written
+ * for busybox several months ago.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * Notes:
+ *   1) I'm using an unsigned long long to hold the product size * block_size,
+ *      as df (which calls this routine) could request a representation of a
+ *      partition size in bytes > max of unsigned long.  If long longs aren't
+ *      available, it would be possible to do what's needed using polynomial
+ *      representations (say, powers of 1024) and manipulating coefficients.
+ *      The base ten "bytes" output could be handled similarly.
  *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
+ *   2) This routine always outputs a decimal point and a tenths digit when
+ *      display_unit != 0.  Hence, it isn't uncommon for the returned string
+ *      to have a length of 5 or 6.
  *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Based in part on code from sash, Copyright (c) 1999 by David I. Bell 
- * Permission has been granted to redistribute this code under the GPL.
+ *      It might be nice to add a flag to indicate no decimal digits in
+ *      that case.  This could be either an additional parameter, or a
+ *      special value of display_unit.  Such a flag would also be nice for du.
  *
+ *      Some code to omit the decimal point and tenths digit is sketched out
+ *      and "#if 0"'d below.
  */
 
 #include <stdio.h>
 #include "libbb.h"
 
+const char *make_human_readable_str(unsigned long long size,
+	unsigned long block_size, unsigned long display_unit)
+{
+	/* The code will adjust for additional (appended) units. */
+	static const char zero_and_units[] = { '0', 0, 'k', 'M', 'G', 'T' };
+	static const char fmt[] = "%llu";
+	static const char fmt_tenths[] = "%llu.%d%c";
 
+	static char str[21];		/* Sufficient for 64 bit unsigned integers. */
 
-const char *make_human_readable_str(unsigned long val, unsigned long hr)
-{
-	int i=0;
-	static char str[10] = "\0";
-	static const char strings[] = { 'k', 'M', 'G', 'T', 0 };
-	unsigned long divisor = 1;
-
-	if(val == 0)
-		return("0");
-	if(hr)
-		snprintf(str, 9, "%ld", val/hr);
-	else {
-		while(val >= divisor && i <= 4) {
-			divisor=divisor<<10, i++;
-		} 
-		divisor=divisor>>10, i--;
-		snprintf(str, 9, "%.1Lf%c", (long double)(val)/divisor, strings[i]);
+	unsigned long long val;
+	int frac;
+	const char *u;
+	const char *f;
+
+	u = zero_and_units;
+	f = fmt;
+	frac = 0;
+
+	val = size * block_size;
+	if (val == 0) {
+		return u;
 	}
-	return(str);
-}
 
+	if (display_unit) {
+		val += display_unit/2;	/* Deal with rounding. */
+		val /= display_unit;	/* Don't combine with the line above!!! */
+	} else {
+		++u;
+		while ((val >= KILOBYTE)
+			   && (u < zero_and_units + sizeof(zero_and_units) - 1)) {
+			f = fmt_tenths;
+			++u;
+			frac = ((((int)(val % KILOBYTE)) * 10) + (KILOBYTE/2)) / KILOBYTE;
+			val /= KILOBYTE;
+		}
+		if (frac >= 10) {		/* We need to round up here. */
+			++val;
+			frac = 0;
+		}
+#if 0
+		/* Sample code to omit decimal point and tenths digit. */
+		if ( /* no_tenths */ 1 ) {
+			if ( frac >= 5 ) {
+				++val;
+			}
+			f = "%llu%*c" /* fmt_no_tenths */ ;
+			frac = 1;
+		}
+#endif
+	}
 
-/* END CODE */
-/*
-Local Variables:
-c-file-style: "linux"
-c-basic-offset: 4
-tab-width: 4
-End:
-*/
+	/* If f==fmt then 'frac' and 'u' are ignored. */
+	snprintf(str, sizeof(str), f, val, frac, *u);
+
+	return str;
+}