X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fusage.h;h=4e520655853fc9ac0d5a4fb72ab193becd31303c;hb=f8138d1f91c913166bffb0077a0fe06831a77ecf;hp=3edb0f7ca29046511ecf1bd3b5880f999a91527f;hpb=856489b63c276571387a9646d418081b5609628b;p=oweals%2Fbusybox.git diff --git a/include/usage.h b/include/usage.h index 3edb0f7ca..4e5206558 100644 --- a/include/usage.h +++ b/include/usage.h @@ -1,1360 +1,1377 @@ +/* vi: set sw=8 ts=8: */ +/* + * This file suffers from chronically incorrect tabification + * of messages. Before editing this file: + * 1. Switch you editor to 8-space tab mode. + * 2. Do not use \t in messages, use real tab character. + * 3. Start each source line with message as follows: + * |<7 spaces>"text with tabs".... + */ + #ifndef __BB_USAGE_H__ #define __BB_USAGE_H__ #define addgroup_trivial_usage \ - "[-g GID] group_name [user_name]" + "[-g GID] group_name [user_name]" #define addgroup_full_usage \ - "Adds a group to the system\n\n" \ - "Options:\n" \ - "\t-g GID\t\tspecify gid" + "Add a group to the system" \ + "\n\nOptions:\n" \ + " -g GID Specify gid" #define adduser_trivial_usage \ - "[OPTIONS] user_name" + "[OPTIONS] user_name" #define adduser_full_usage \ - "Adds a user to the system\n\n" \ - "Options:\n" \ - "\t-h DIR\t\tAssign home directory DIR\n" \ - "\t-g GECOS\tAssign gecos field GECOS\n" \ - "\t-s SHELL\tAssign login shell SHELL\n" \ - "\t-G\t\tAdd the user to existing group GROUP\n" \ - "\t-S\t\tcreate a system user (ignored)\n" \ - "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \ - "\t-H\t\tDo not create the home directory" + "Add a user to the system" \ + "\n\nOptions:\n" \ + " -h DIR Assign home directory DIR\n" \ + " -g GECOS Assign gecos field GECOS\n" \ + " -s SHELL Assign login shell SHELL\n" \ + " -G Add the user to existing group GROUP\n" \ + " -S Create a system user (ignored)\n" \ + " -D Do not assign a password (logins still possible via ssh)\n" \ + " -H Do not create the home directory" #define adjtimex_trivial_usage \ - "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" + "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" #define adjtimex_full_usage \ - "Reads and optionally sets system timebase parameters.\n" \ - "See adjtimex(2).\n\n" \ - "Options:\n" \ - "\t-q\t\tquiet mode - do not print\n" \ - "\t-o offset\ttime offset, microseconds\n" \ - "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \ - "\t\t\t(positive values make the system clock run fast)\n" \ - "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \ - "\t-p timeconstant" + "Read and optionally set system timebase parameters.\n" \ + "See adjtimex(2)." \ + "\n\nOptions:\n" \ + " -q Quiet mode - do not print\n" \ + " -o offset Time offset, microseconds\n" \ + " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \ + " (positive values make the system clock run fast)\n" \ + " -t tick Microseconds per tick, usually 10000\n" \ + " -p timeconstant" #define ar_trivial_usage \ - "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" + "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" #define ar_full_usage \ - "Extract or list FILES from an ar archive.\n\n" \ - "Options:\n" \ - "\t-o\t\tpreserve original dates\n" \ - "\t-p\t\textract to stdout\n" \ - "\t-t\t\tlist\n" \ - "\t-x\t\textract\n" \ - "\t-v\t\tverbosely list files processed" + "Extract or list FILES from an ar archive" \ + "\n\nOptions:\n" \ + " -o Preserve original dates\n" \ + " -p Extract to stdout\n" \ + " -t List\n" \ + " -x Extract\n" \ + " -v Verbosely list files processed" + +#define arp_trivial_usage \ + "\n" \ + "[-vn] [-H type] [-i if] -a [hostname]\n" \ + "[-v] [-i if] -d hostname [pub]\n" \ + "[-v] [-H type] [-i if] -s hostname hw_addr [temp]\n" \ + "[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \ + "[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n" +#define arp_full_usage \ + "Manipulate the system ARP cache" \ + "\n\nOptions:" \ + "\n -a Display (all) hosts" \ + "\n -s Set a new ARP entry" \ + "\n -d Delete a specified entry" \ + "\n -v Verbose" \ + "\n -n Don't resolve names" \ + "\n -i if Specify network interface (e.g. eth0)" \ + "\n -D Read from given device" \ + "\n -A, -p Specify protocol family" \ + "\n -H hwtype Specify hardware address type" #define arping_trivial_usage \ - "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target" + "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target" #define arping_full_usage \ - "Ping hosts by ARP requests/replies.\n\n" \ - "Options:\n" \ - "\t-f\t\tQuit on first ARP reply\n" \ - "\t-q\t\tBe quiet\n" \ - "\t-b\t\tKeep broadcasting, don't go unicast\n" \ - "\t-D\t\tDuplicated address detection mode\n" \ - "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \ - "\t-A\t\tARP answer mode, update your neighbours\n" \ - "\t-c count\tStop after sending count ARP request packets\n" \ - "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \ - "\t-i device\tOutgoing interface name, default is eth0\n" \ - "\t-s sender\tSet specific sender IP address\n" \ - "\ttarget\t\tTarget IP address of ARP request" + "Ping hosts by ARP requests/replies" \ + "\n\nOptions:\n" \ + " -f Quit on first ARP reply\n" \ + " -q Be quiet\n" \ + " -b Keep broadcasting, don't go unicast\n" \ + " -D Duplicated address detection mode\n" \ + " -U Unsolicited ARP mode, update your neighbours\n" \ + " -A ARP answer mode, update your neighbours\n" \ + " -c count Stop after sending count ARP request packets\n" \ + " -w timeout Time to wait for ARP reply, in seconds\n" \ + " -i device Outgoing interface name, default is eth0\n" \ + " -s sender Set specific sender IP address\n" \ + " target Target IP address of ARP request" #define ash_trivial_usage \ - "[FILE]...\n" \ - "or: ash -c command [args]..." + "[FILE]...\n" \ + "or: ash -c command [args]..." #define ash_full_usage \ - "The ash shell (command interpreter)" + "The ash shell (command interpreter)" #define awk_trivial_usage \ - "[OPTION]... [program-text] [FILE ...]" + "[OPTION]... [program-text] [FILE ...]" #define awk_full_usage \ - "Options:\n" \ - "\t-v var=val\tassign value 'val' to variable 'var'\n" \ - "\t-F sep\t\tuse 'sep' as field separator\n" \ - "\t-f progname\tread program source from file 'progname'" + "Options:\n" \ + " -v var=val Assign value 'val' to variable 'var'\n" \ + " -F sep Use 'sep' as field separator\n" \ + " -f progname Read program source from file 'progname'" #define basename_trivial_usage \ - "FILE [SUFFIX]" + "FILE [SUFFIX]" #define basename_full_usage \ - "Strips directory path and suffixes from FILE.\n" \ - "If specified, also removes any trailing SUFFIX." + "Strip directory path and suffixes from FILE.\n" \ + "If specified, also remove any trailing SUFFIX." #define basename_example_usage \ - "$ basename /usr/local/bin/foo\n" \ - "foo\n" \ - "$ basename /usr/local/bin/\n" \ - "bin\n" \ - "$ basename /foo/bar.txt .txt\n" \ - "bar" + "$ basename /usr/local/bin/foo\n" \ + "foo\n" \ + "$ basename /usr/local/bin/\n" \ + "bin\n" \ + "$ basename /foo/bar.txt .txt\n" \ + "bar" #define bunzip2_trivial_usage \ - "[OPTION]... [FILE]" + "[OPTION]... [FILE]" #define bunzip2_full_usage \ - "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ - "Options:\n" \ - "\t-c\tWrite output to standard output\n" \ - "\t-f\tForce" + "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ + "\n\nOptions:\n" \ + " -c Write output to standard output\n" \ + " -f Force" #define busybox_notes_usage \ - "Hello world!\n" + "Hello world!\n" #define bzcat_trivial_usage \ - "FILE" + "FILE" #define bzcat_full_usage \ - "Uncompress to stdout." + "Uncompress to stdout" #define unlzma_trivial_usage \ - "[OPTION]... [FILE]" + "[OPTION]... [FILE]" #define unlzma_full_usage \ - "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ - "Options:\n" \ - "\t-c\tWrite output to standard output\n" \ - "\t-f\tForce" + "Uncompress FILE (or standard input if FILE is '-' or omitted)" \ + "\n\nOptions:\n" \ + " -c Write output to standard output\n" \ + " -f Force" #define lzmacat_trivial_usage \ - "FILE" + "FILE" #define lzmacat_full_usage \ - "Uncompress to stdout." + "Uncompress to stdout" #define cal_trivial_usage \ - "[-jy] [[month] year]" + "[-jy] [[month] year]" #define cal_full_usage \ - "Display a calendar.\n" \ - "\nOptions:\n" \ - "\t-j\tUse julian dates\n" \ - "\t-y\tDisplay the entire year" + "Display a calendar" \ + "\n\nOptions:\n" \ + " -j Use julian dates\n" \ + " -y Display the entire year" #define cat_trivial_usage \ - "[-u] [FILE]..." + "[-u] [FILE]..." #define cat_full_usage \ - "Concatenates FILE(s) and prints them to stdout.\n\n" \ - "Options:\n" \ - "\t-u\tignored since unbuffered i/o is always used" + "Concatenate FILE(s) and print them to stdout" \ + "\n\nOptions:\n" \ + " -u Ignored since unbuffered i/o is always used" #define cat_example_usage \ - "$ cat /proc/uptime\n" \ - "110716.72 17.67" - + "$ cat /proc/uptime\n" \ + "110716.72 17.67" + +#define catv_trivial_usage \ + "[-etv] [FILE]..." +#define catv_full_usage \ + "Display nonprinting characters as ^x or M-x" \ + "\n\nOptions:\n" \ + " -e End each line with $\n" \ + " -t Show tabs as ^I\n" \ + " -v Don't use ^x or M-x escapes" #define chattr_trivial_usage \ - "[-R] [-+=AacDdijsStTu] [-v version] files..." + "[-R] [-+=AacDdijsStTu] [-v version] files..." #define chattr_full_usage \ - "change file attributes on an ext2 fs\n\n" \ - "Modifiers:\n" \ - "\t-\tremove attributes\n" \ - "\t+\tadd attributes\n" \ - "\t=\tset attributes\n" \ - "Attributes:\n" \ - "\tA\tdon't track atime\n" \ - "\ta\tappend mode only\n" \ - "\tc\tenable compress\n" \ - "\tD\twrite dir contents synchronously\n" \ - "\td\tdo not backup with dump\n" \ - "\ti\tcannot be modified (immutable)\n" \ - "\tj\twrite all data to journal first\n" \ - "\ts\tzero disk storage when deleted\n" \ - "\tS\twrite file contents synchronously\n" \ - "\tt\tdisable tail-merging of partial blocks with other files\n" \ - "\tu\tallow file to be undeleted\n" \ - "Options:\n" \ - "\t-R\trecursively list subdirectories\n" \ - "\t-v\tset the file's version/generation number" + "Change file attributes on an ext2 fs\n\n" \ + "Modifiers:\n" \ + " - Remove attributes\n" \ + " + Add attributes\n" \ + " = Set attributes\n" \ + "Attributes:\n" \ + " A Don't track atime\n" \ + " a Append mode only\n" \ + " c Enable compress\n" \ + " D Write dir contents synchronously\n" \ + " d Do not backup with dump\n" \ + " i Cannot be modified (immutable)\n" \ + " j Write all data to journal first\n" \ + " s Zero disk storage when deleted\n" \ + " S Write file contents synchronously\n" \ + " t Disable tail-merging of partial blocks with other files\n" \ + " u Allow file to be undeleted\n" \ + "Options:\n" \ + " -R Recursively list subdirectories\n" \ + " -v Set the file's version/generation number" #define chgrp_trivial_usage \ - "[OPTION]... GROUP FILE..." + "[-Rh"USE_DESKTOP("cvf")"]... GROUP FILE..." #define chgrp_full_usage \ - "Change the group membership of each FILE to GROUP.\n" \ - "\nOptions:\n" \ - "\t-R\tChanges files and directories recursively" + "Change the group membership of each FILE to GROUP" \ + "\n\nOptions:\n" \ + " -R Changes files and directories recursively\n" \ + " -h Do not dereference symbolic links" \ + USE_DESKTOP( \ + "\n -c List changed files" \ + "\n -v List all files" \ + "\n -f Hide errors" \ + ) #define chgrp_example_usage \ - "$ ls -l /tmp/foo\n" \ - "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ - "$ chgrp root /tmp/foo\n" \ - "$ ls -l /tmp/foo\n" \ - "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" + "$ ls -l /tmp/foo\n" \ + "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ + "$ chgrp root /tmp/foo\n" \ + "$ ls -l /tmp/foo\n" \ + "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" #define chmod_trivial_usage \ - "[-R] MODE[,MODE]... FILE..." + "[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..." #define chmod_full_usage \ - "Each MODE is one or more of the letters ugoa, one of the\n" \ - "symbols +-= and one or more of the letters rwxst.\n\n" \ - "Options:\n" \ - "\t-R\tChanges files and directories recursively" + "Each MODE is one or more of the letters ugoa, one of the\n" \ + "symbols +-= and one or more of the letters rwxst" \ + "\n\nOptions:" \ + "\n -R Changes files and directories recursively" \ + USE_DESKTOP( \ + "\n -c List changed files" \ + "\n -v List all files" \ + "\n -f Hide errors" \ + ) #define chmod_example_usage \ - "$ ls -l /tmp/foo\n" \ - "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ - "$ chmod u+x /tmp/foo\n" \ - "$ ls -l /tmp/foo\n" \ - "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ - "$ chmod 444 /tmp/foo\n" \ - "$ ls -l /tmp/foo\n" \ - "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" + "$ ls -l /tmp/foo\n" \ + "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ + "$ chmod u+x /tmp/foo\n" \ + "$ ls -l /tmp/foo\n" \ + "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ + "$ chmod 444 /tmp/foo\n" \ + "$ ls -l /tmp/foo\n" \ + "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" #define chown_trivial_usage \ - "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..." + "[-Rh"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..." #define chown_full_usage \ - "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \ - "\nOptions:\n" \ - "\t-R\tChanges files and directories recursively\n" \ - "\t-h\tDo not dereference symbolic links" + "Change the owner and/or group of each FILE to OWNER and/or GROUP" \ + "\n\nOptions:" \ + "\n -R Changes files and directories recursively" \ + "\n -h Do not dereference symbolic links" \ + USE_DESKTOP( \ + "\n -c List changed files" \ + "\n -v List all files" \ + "\n -f Hide errors" \ + ) #define chown_example_usage \ - "$ ls -l /tmp/foo\n" \ - "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ - "$ chown root /tmp/foo\n" \ - "$ ls -l /tmp/foo\n" \ - "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ - "$ chown root.root /tmp/foo\n" \ - "ls -l /tmp/foo\n" \ - "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" + "$ ls -l /tmp/foo\n" \ + "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ + "$ chown root /tmp/foo\n" \ + "$ ls -l /tmp/foo\n" \ + "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ + "$ chown root.root /tmp/foo\n" \ + "ls -l /tmp/foo\n" \ + "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" + +#define chpst_trivial_usage \ + "[-vP012] [-u user[:group]] [-U user[:group]] [-e dir] " \ + "[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \ + "[-p processes] [-f bytes] [-c bytes] prog args" +#define chpst_full_usage \ + "Change the process state and run specified program" \ + "\n\nOptions:\n" \ + " -u user[:grp] Set uid and gid\n" \ + " -U user[:grp] Set environment variables UID and GID\n" \ + " -e dir Set environment variables as specified by files\n" \ + " in the directory: file=1st_line_of_file\n" \ + " -/ dir Chroot to dir\n" \ + " -n inc Add inc to nice value\n" \ + " -m bytes Limit data segment, stack segment, locked physical pages,\n" \ + " and total of all segment per process to bytes bytes each\n" \ + " -d bytes Limit data segment\n" \ + " -o n Limit the number of open file descriptors per process to n\n" \ + " -p n Limit number of processes per uid to n\n" \ + " -f bytes Limit output file size to bytes bytes\n" \ + " -c bytes Limit core file size to bytes bytes\n" \ + " -v Verbose\n" \ + " -P Run prog in a new process group\n" \ + " -0 Close standard input\n" \ + " -1 Close standard output\n" \ + " -2 Close standard error" +#define setuidgid_trivial_usage \ + "account prog args" +#define setuidgid_full_usage \ + "Set uid and gid to account's uid and gid, removing all supplementary\n" \ + "groups, then run prog" +#define envuidgid_trivial_usage \ + "account prog args" +#define envuidgid_full_usage \ + "Set $UID to account's uid and $GID to account's gid, then run prog" +#define envdir_trivial_usage \ + "dir prog args" +#define envdir_full_usage \ + "Set various environment variables as specified by files\n" \ + "in the directory dir, then run prog" +#define softlimit_trivial_usage \ + "[-a allbytes] [-c corebytes] [-d databytes] [-f filebytes] " \ + "[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \ + "[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args" +#define softlimit_full_usage \ + "Set soft resource limits, then run prog" \ + "\n\nOptions:\n" \ + " -m n Same as -d n -s n -l n -a n\n" \ + " -d n Limit the data segment per process to n bytes\n" \ + " -s n Limit the stack segment per process to n bytes\n" \ + " -l n Limit the locked physical pages per process to n bytes\n" \ + " -a n Limit the total of all segments per process to n bytes\n" \ + " -o n Limit the number of open file descriptors per process to n\n" \ + " -p n Limit the number of processes per uid to n\n" \ + "Options controlling file sizes:\n" \ + " -f n Limit output file sizes to n bytes\n" \ + " -c n Limit core file sizes to n bytes\n" \ + "Efficiency opts:\n" \ + " -r n Limit the resident set size to n bytes. This limit is not\n" \ + " enforced unless physical memory is full\n" \ + " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \ + " except that the process receives a SIGXCPU signal after n seconds\n" \ + "\n" \ + "Some options may have no effect on some operating systems\n" \ + "n may be =, indicating that soft limit should be set equal to hard limit" #define chroot_trivial_usage \ - "NEWROOT [COMMAND...]" + "NEWROOT [COMMAND...]" #define chroot_full_usage \ - "Run COMMAND with root directory set to NEWROOT." + "Run COMMAND with root directory set to NEWROOT" #define chroot_example_usage \ - "$ ls -l /bin/ls\n" \ - "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ - "# mount /dev/hdc1 /mnt -t minix\n" \ - "# chroot /mnt\n" \ - "# ls -l /bin/ls\n" \ - "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" + "$ ls -l /bin/ls\n" \ + "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ + "# mount /dev/hdc1 /mnt -t minix\n" \ + "# chroot /mnt\n" \ + "# ls -l /bin/ls\n" \ + "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" #define chvt_trivial_usage \ - "N" + "N" #define chvt_full_usage \ - "Changes the foreground virtual terminal to /dev/ttyN" + "Change the foreground virtual terminal to /dev/ttyN" #define cksum_trivial_usage \ - "FILES..." + "FILES..." #define cksum_full_usage \ - "Calculates the CRC32 checksums of FILES." + "Calculate the CRC32 checksums of FILES" #define clear_trivial_usage \ - "" + "" #define clear_full_usage \ - "Clear screen." + "Clear screen" #define cmp_trivial_usage \ - "[-l] [-s] FILE1 [FILE2]" + "[-l] [-s] FILE1 [FILE2]" #define cmp_full_usage \ - "Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \ - "Options:\n" \ - "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \ - "\t\t for all differing bytes\n" \ - "\t-s\tquiet mode - do not print" + "Compares FILE1 vs stdin if FILE2 is not specified" \ + "\n\nOptions:\n" \ + " -l Write the byte numbers (decimal) and values (octal)\n" \ + " for all differing bytes\n" \ + " -s Quiet mode - do not print" #define comm_trivial_usage \ - "[-123] FILE1 FILE2" + "[-123] FILE1 FILE2" #define comm_full_usage \ - "Compares FILE1 to FILE2, or to stdin if = is specified.\n\n" \ - "Options:\n" \ - "\t-1\tSuppress lines unique to FILE1\n" \ - "\t-2\tSuppress lines unique to FILE2\n" \ - "\t-3\tSuppress lines common to both files" + "Compare FILE1 to FILE2, or to stdin if - is specified" \ + "\n\nOptions:\n" \ + " -1 Suppress lines unique to FILE1\n" \ + " -2 Suppress lines unique to FILE2\n" \ + " -3 Suppress lines common to both files" #define bbconfig_trivial_usage \ - "" + "" #define bbconfig_full_usage \ - "Print the config file which built busybox" + "Print the config file which built busybox" + +#define bbsh_trivial_usage \ + "[FILE]...\n" \ + "or: bbsh -c command [args]..." +#define bbsh_full_usage \ + "The bbsh shell (command interpreter)" #define cp_trivial_usage \ - "[OPTION]... SOURCE DEST" + "[OPTION]... SOURCE DEST" #define cp_full_usage \ - "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \ - "\n" \ - "\t-a\tSame as -dpR\n" \ - "\t-d,-P\tPreserves links\n" \ - "\t-H,-L\tDereference all symlinks (implied by default)\n" \ - "\t-p\tPreserves file attributes if possible\n" \ - "\t-f\tforce (implied; ignored) - always set\n" \ - "\t-i\tinteractive, prompt before overwrite\n" \ - "\t-R,-r\tCopies directories recursively" + "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \ + "\n\nOptions:\n" \ + " -a Same as -dpR\n" \ + " -d,-P Preserve links\n" \ + " -H,-L Dereference all symlinks (implied by default)\n" \ + " -p Preserve file attributes if possible\n" \ + " -f Force, overwrite\n" \ + " -i Interactive, prompt before overwrite\n" \ + " -R,-r Copy directories recursively\n" \ + " -l,-s Create (sym)links" #define cpio_trivial_usage \ - "-[dimtuv][F cpiofile]" + "-[dimtuv][F cpiofile]" #define cpio_full_usage \ - "Extract or list files from a cpio archive\n" \ - "Main operation mode:\n" \ - "\td\t\tmake leading directories\n" \ - "\ti\t\textract\n" \ - "\tm\t\tpreserve mtime\n" \ - "\tt\t\tlist\n" \ - "\tv\t\tverbose\n" \ - "\tu\t\tunconditional overwrite\n" \ - "\tF\t\tinput from file" + "Extract or list files from a cpio archive\n" \ + "Main operation mode:\n" \ + " d Make leading directories\n" \ + " i Extract\n" \ + " m Preserve mtime\n" \ + " t List\n" \ + " v Verbose\n" \ + " u Unconditional overwrite\n" \ + " F Input from file" #define crond_trivial_usage \ - "-d[#] -c -f -b" + "-d[#] -c -f -b" #define crond_full_usage \ - "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \ - "\t-d num\tdebug level\n" \ - "\t-l num\tlog level (8 - default)\n" \ - "\t-S\tlog to syslogd (default)\n" \ - "\t-L file\tlog to file\n" \ - "\t-f\trun in fordeground\n" \ - "\t-b\trun in background (default)\n" \ - "\t-c dir\tworking dir" + " -d [#] -l [#] -S -L logfile -f -b -c dir\n" \ + " -d num Debug level\n" \ + " -l num Log level (8 - default)\n" \ + " -S Log to syslogd (default)\n" \ + " -L file Log to file\n" \ + " -f Run in foreground\n" \ + " -b Run in background (default)\n" \ + " -c dir Working dir" #define crontab_trivial_usage \ - "[-c dir] {file|-}|[-u|-l|-e|-d user]" + "[-c dir] {file|-}|[-u|-l|-e|-d user]" #define crontab_full_usage \ - "\tfile replace crontab from file\n" \ - "\t- replace crontab from stdin\n" \ - "\t-u user specify user\n" \ - "\t-l [user] list crontab for user\n" \ - "\t-e [user] edit crontab for user\n" \ - "\t-d [user] delete crontab for user\n" \ - "\t-c dir specify crontab directory" + " File replace crontab from file\n" \ + " - replace crontab from stdin\n" \ + " -u user specify user\n" \ + " -l [user] list crontab for user\n" \ + " -e [user] edit crontab for user\n" \ + " -d [user] delete crontab for user\n" \ + " -c dir specify crontab directory" #define cut_trivial_usage \ - "[OPTION]... [FILE]..." + "[OPTION]... [FILE]..." #define cut_full_usage \ - "Prints selected fields from each input FILE to standard output.\n\n" \ - "Options:\n" \ - "\t-b LIST\t\tOutput only bytes from LIST\n" \ - "\t-c LIST\t\tOutput only characters from LIST\n" \ - "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \ - "\t-s\t\tOutput only the lines containing delimiter\n" \ - "\t-f N\t\tPrint only these fields\n" \ - "\t-n\t\tIgnored" + "Print selected fields from each input FILE to standard output" \ + "\n\nOptions:\n" \ + " -b LIST Output only bytes from LIST\n" \ + " -c LIST Output only characters from LIST\n" \ + " -d CHAR Use CHAR instead of tab as the field delimiter\n" \ + " -s Output only the lines containing delimiter\n" \ + " -f N Print only these fields\n" \ + " -n Ignored" #define cut_example_usage \ - "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ - "Hello\n" \ - "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ - "world\n" - -#ifdef CONFIG_FEATURE_DATE_ISOFMT -#define USAGE_DATE_ISOFMT(a) a -#else -#define USAGE_DATE_ISOFMT(a) -#endif + "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ + "Hello\n" \ + "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ + "world\n" #define date_trivial_usage \ - "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" + "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" #define date_full_usage \ - "Displays the current time in the given FORMAT, or sets the system date.\n" \ - "\nOptions:\n" \ - "\t-R\t\tOutputs RFC-822 compliant date string\n" \ - "\t-d STRING\tDisplays time described by STRING, not `now'\n" \ - USAGE_DATE_ISOFMT( \ - "\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string\n" \ - "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \ - "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \ - "\t\t\ttime to the indicated precision\n" \ - "\t-D hint\t\tUse 'hint' as date format, via strptime()\n" \ + "Display current time in the given FORMAT, or set system date" \ + "\n\nOptions:\n" \ + " -R Outputs RFC-822 compliant date string\n" \ + " -d STRING Displays time described by STRING, not 'now'\n" \ + USE_FEATURE_DATE_ISOFMT( \ + " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \ + " TIMESPEC='date' (or missing) for date only,\n" \ + " 'hours', 'minutes', or 'seconds' for date and,\n" \ + " time to the indicated precision\n" \ + " -D hint Use 'hint' as date format, via strptime()\n" \ ) \ - "\t-s\t\tSets time described by STRING\n" \ - "\t-r FILE\t\tDisplays the last modification time of FILE\n" \ - "\t-u\t\tPrints or sets Coordinated Universal Time" + " -s Sets time described by STRING\n" \ + " -r FILE Displays the last modification time of FILE\n" \ + " -u Prints or sets Coordinated Universal Time" #define date_example_usage \ - "$ date\n" \ - "Wed Apr 12 18:52:41 MDT 2000\n" + "$ date\n" \ + "Wed Apr 12 18:52:41 MDT 2000\n" #define dc_trivial_usage \ - "expression ..." + "expression ..." #define dc_full_usage \ - "This is a Tiny RPN calculator that understands the\n" \ - "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \ - "**, exp, and, or, not, eor.\n" \ - "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \ - "\nOptions:\n" \ - "p - Prints the value on the top of the stack, without altering the stack\n" \ - "f - Prints the entire contents of the stack without altering anything\n" \ - "o - Pops the value off the top of the stack and uses it to set the output radix\n" \ - " Only 10 and 16 are supported" + "This is a Tiny RPN calculator that understands the\n" \ + "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \ + "**, exp, and, or, not, eor.\n" \ + "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \ + "\n\nOptions:\n" \ + "p - Prints the value on the top of the stack, without altering the stack\n" \ + "f - Prints the entire contents of the stack without altering anything\n" \ + "o - Pops the value off the top of the stack and uses it to set the output radix\n" \ + " Only 10 and 16 are supported" #define dc_example_usage \ - "$ dc 2 2 + p\n" \ - "4\n" \ - "$ dc 8 8 \\* 2 2 + / p\n" \ - "16\n" \ - "$ dc 0 1 and p\n" \ - "0\n" \ - "$ dc 0 1 or p\n" \ - "1\n" \ - "$ echo 72 9 div 8 mul p | dc\n" \ - "64\n" + "$ dc 2 2 + p\n" \ + "4\n" \ + "$ dc 8 8 \\* 2 2 + / p\n" \ + "16\n" \ + "$ dc 0 1 and p\n" \ + "0\n" \ + "$ dc 0 1 or p\n" \ + "1\n" \ + "$ echo 72 9 div 8 mul p | dc\n" \ + "64\n" #define dd_trivial_usage \ - "[if=FILE] [of=FILE] [bs=N] [count=N] [skip=N]\n" \ - "\t [seek=N] [conv=notrunc|noerror|sync]" + "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ + " [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]") #define dd_full_usage \ - "Copy a file, converting and formatting according to options\n\n" \ - "\tif=FILE\t\tread from FILE instead of stdin\n" \ - "\tof=FILE\t\twrite to FILE instead of stdout\n" \ - "\tbs=N\t\tread and write N bytes at a time\n" \ - "\tcount=N\t\tcopy only N input blocks\n" \ - "\tskip=N\t\tskip N input blocks\n" \ - "\tseek=N\t\tskip N output blocks\n" \ - "\tconv=notrunc\tdon't truncate output file\n" \ - "\tconv=noerror\tcontinue after read errors\n" \ - "\tconv=sync\tpad blocks with zeros\n" \ - "\n" \ - "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ - "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" + "Copy a file with converting and formatting" \ + "\n\nOptions:\n" \ + " if=FILE Read from FILE instead of stdin\n" \ + " of=FILE Write to FILE instead of stdout\n" \ + " bs=N Read and write N bytes at a time\n" \ + USE_FEATURE_DD_IBS_OBS( \ + " ibs=N Read N bytes at a time\n") \ + USE_FEATURE_DD_IBS_OBS( \ + " obs=N Write N bytes at a time\n") \ + " count=N Copy only N input blocks\n" \ + " skip=N Skip N input blocks\n" \ + " seek=N Skip N output blocks\n" \ + USE_FEATURE_DD_IBS_OBS( \ + " conv=notrunc Don't truncate output file\n" \ + " conv=noerror Continue after read errors\n" \ + " conv=sync Pad blocks with zeros\n") \ + "\n" \ + "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ + "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" #define dd_example_usage \ - "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ - "4+0 records in\n" \ - "4+0 records out\n" + "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ + "4+0 records in\n" \ + "4+0 records out\n" #define deallocvt_trivial_usage \ - "[N]" + "[N]" #define deallocvt_full_usage \ - "Deallocate unused virtual terminal /dev/ttyN" + "Deallocate unused virtual terminal /dev/ttyN" #define delgroup_trivial_usage \ - "GROUP" + "GROUP" #define delgroup_full_usage \ - "Deletes group GROUP from the system" + "Delete group GROUP from the system" #define deluser_trivial_usage \ - "USER" + "USER" #define deluser_full_usage \ - "Deletes user USER from the system" - -#ifdef CONFIG_DEVFSD_FG_NP -# define USAGE_DEVFSD_FG_NP(a) a -#else -# define USAGE_DEVFSD_FG_NP(a) -#endif + "Delete user USER from the system" #define devfsd_trivial_usage \ - "mntpnt [-v]" \ - USAGE_DEVFSD_FG_NP("[-fg][-np]" ) + "mntpnt [-v]" \ + USE_DEVFSD_FG_NP("[-fg][-np]" ) #define devfsd_full_usage \ - "Optional daemon for managing devfs permissions and old device name symlinks.\n" \ - "\nOptions:\n" \ - "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \ - "\t-v\tPrint the protocol version numbers for devfsd\n" \ - "\t\tand the kernel-side protocol version and exits." \ - USAGE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \ - "\t-np\tExit after parsing the configuration file\n" \ - "\t\tand processing synthetic REGISTER events.\n" \ - "\t\tDo not poll for events.") - -#ifdef CONFIG_FEATURE_HUMAN_READABLE -# define USAGE_HUMAN_READABLE(a) a -# define USAGE_NOT_HUMAN_READABLE(a) -#else -# define USAGE_HUMAN_READABLE(a) -# define USAGE_NOT_HUMAN_READABLE(a) a -#endif + "Manage devfs permissions and old device name symlinks" \ + "\n\nOptions:" \ + "\n mntpnt The mount point where devfs is mounted" \ + "\n -v Print the protocol version numbers for devfsd" \ + "\n and the kernel-side protocol version and exits" \ + USE_DEVFSD_FG_NP( \ + "\n -fg Run the daemon in the foreground" \ + "\n -np Exit after parsing the configuration file" \ + "\n and processing synthetic REGISTER events," \ + "\n do not poll for events") + #define df_trivial_usage \ - "[-" USAGE_HUMAN_READABLE("hm") USAGE_NOT_HUMAN_READABLE("") "k] [FILESYSTEM ...]" + "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]" #define df_full_usage \ - "Print the filesystem space used and space available.\n\n" \ - "Options:\n" \ - USAGE_HUMAN_READABLE( \ - "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ - "\t-m\tprint sizes in megabytes\n" \ - "\t-k\tprint sizes in kilobytes(default)") USAGE_NOT_HUMAN_READABLE( \ - "\n\t-k\tprint sizes in kilobytes(compatibility)") + "Print the filesystem space used and space available" \ + "\n\nOptions:\n" \ + USE_FEATURE_HUMAN_READABLE( \ + "\n -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \ + " -m Print sizes in megabytes\n" \ + " -k Print sizes in kilobytes(default)") \ + SKIP_FEATURE_HUMAN_READABLE( \ + "\n -k Ignored") #define df_example_usage \ - "$ df\n" \ - "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ - "/dev/sda3 8690864 8553540 137324 98% /\n" \ - "/dev/sda1 64216 36364 27852 57% /boot\n" \ - "$ df /dev/sda3\n" \ - "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ - "/dev/sda3 8690864 8553540 137324 98% /\n" + "$ df\n" \ + "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ + "/dev/sda3 8690864 8553540 137324 98% /\n" \ + "/dev/sda1 64216 36364 27852 57% /boot\n" \ + "$ df /dev/sda3\n" \ + "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ + "/dev/sda3 8690864 8553540 137324 98% /\n" + +#define dhcprelay_trivial_usage \ + "[client_device_list] [server_device]" +#define dhcprelay_full_usage \ + "Relay dhcp requests from client devices to server device" + +#define dhcprelay_trivial_usage \ + "[client_device_list] [server_device]" +#define dhcprelay_full_usage \ + "Relay dhcp requests from client devices to server device" #define diff_trivial_usage \ - "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" + "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" #define diff_full_usage \ - "Compare files line by line and output the differences between them.\n" \ - "This diff implementation only supports unified diffs.\n\n" \ - "Options:\n" \ - "\t-a\tTreat all files as text\n" \ - "\t-b\tIgnore changes in the amount of whitespace\n" \ - "\t-d\tTry hard to find a smaller set of changes\n" \ - "\t-i\tIgnore case differences\n" \ - "\t-L\tUse LABEL instead of the filename in the unified header\n" \ - "\t-N\tTreat absent files as empty\n" \ - "\t-q\tOutput only whether files differ\n" \ - "\t-r\tRecursively compare any subdirectories\n" \ - "\t-S\tStart with FILE when comparing directories\n" \ - "\t-T\tMake tabs line up by prefixing a tab when necessary\n" \ - "\t-s\tReport when two files are the same\n" \ - "\t-t\tExpand tabs to spaces in output\n" \ - "\t-U\tOutput LINES lines of context\n" \ - "\t-w\tIgnore all whitespace\n" + "Compare files line by line and output the differences between them.\n" \ + "This diff implementation only supports unified diffs." \ + "\n\nOptions:\n" \ + " -a Treat all files as text\n" \ + " -b Ignore changes in the amount of whitespace\n" \ + " -d Try hard to find a smaller set of changes\n" \ + " -i Ignore case differences\n" \ + " -L Use LABEL instead of the filename in the unified header\n" \ + " -N Treat absent files as empty\n" \ + " -q Output only whether files differ\n" \ + " -r Recursively compare subdirectories\n" \ + " -S Start with FILE when comparing directories\n" \ + " -T Make tabs line up by prefixing a tab when necessary\n" \ + " -s Report when two files are the same\n" \ + " -t Expand tabs to spaces in output\n" \ + " -U Output LINES lines of context\n" \ + " -w Ignore all whitespace" #define dirname_trivial_usage \ - "FILENAME" + "FILENAME" #define dirname_full_usage \ - "Strips non-directory suffix from FILENAME" + "Strip non-directory suffix from FILENAME" #define dirname_example_usage \ - "$ dirname /tmp/foo\n" \ - "/tmp\n" \ - "$ dirname /tmp/foo/\n" \ - "/tmp\n" + "$ dirname /tmp/foo\n" \ + "/tmp\n" \ + "$ dirname /tmp/foo/\n" \ + "/tmp\n" #define dmesg_trivial_usage \ - "[-c] [-n LEVEL] [-s SIZE]" + "[-c] [-n LEVEL] [-s SIZE]" #define dmesg_full_usage \ - "Prints or controls the kernel ring buffer\n\n" \ - "Options:\n" \ - "\t-c\t\tClears the ring buffer's contents after printing\n" \ - "\t-n LEVEL\tSets console logging level\n" \ - "\t-s SIZE\t\tUse a buffer of size SIZE" + "Print or control the kernel ring buffer" \ + "\n\nOptions:\n" \ + " -c Clears the ring buffer's contents after printing\n" \ + " -n LEVEL Sets console logging level\n" \ + " -s SIZE Use a buffer of size SIZE" #define dnsd_trivial_usage \ - "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" + "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" #define dnsd_full_usage \ - "Small and static DNS server daemon\n\n" \ - "Options:\n" \ - "\t-c\t\tconfig filename\n" \ - "\t-t\t\tTTL in seconds\n" \ - "\t-p\t\tlistening port\n" \ - "\t-i\t\tlistening iface ip (default all)\n" \ - "\t-d\t\tdaemonize" + "Small and static DNS server daemon" \ + "\n\nOptions:\n" \ + " -c Config filename\n" \ + " -t TTL in seconds\n" \ + " -p Listening port\n" \ + " -i Listening iface ip (default all)\n" \ + " -d Daemonize" #define dos2unix_trivial_usage \ - "[option] [FILE]" + "[option] [FILE]" #define dos2unix_full_usage \ - "Converts FILE from dos format to unix format. When no option\n" \ - "is given, the input is converted to the opposite output format.\n" \ - "When no file is given, uses stdin for input and stdout for output.\n\n" \ - "Options:\n" \ - "\t-u\toutput will be in UNIX format\n" \ - "\t-d\toutput will be in DOS format" + "Convert FILE from dos format to unix format. When no option\n" \ + "is given, the input is converted to the opposite output format.\n" \ + "When no file is given, use stdin for input and stdout for output." \ + "\n\nOptions:\n" \ + " -u Output will be in UNIX format\n" \ + " -d Output will be in DOS format" #define dpkg_trivial_usage \ - "[-ilCPru] [-F option] package_name" + "[-ilCPru] [-F option] package_name" #define dpkg_full_usage \ - "dpkg is a utility to install, remove and manage Debian packages.\n\n" \ - "Options:\n" \ - "\t-i\t\tInstall the package\n" \ - "\t-l\t\tList of installed packages\n" \ - "\t-C\t\tConfigure an unpackaged package\n" \ - "\t-F depends\tIgnore depency problems\n" \ - "\t-P\t\tPurge all files of a package\n" \ - "\t-r\t\tRemove all but the configuration files for a package\n" \ - "\t-u\t\tUnpack a package, but don't configure it" + "Install, remove and manage Debian packages" \ + "\n\nOptions:\n" \ + " -i Install the package\n" \ + " -l List of installed packages\n" \ + " -C Configure an unpackaged package\n" \ + " -F depends Ignore dependency problems\n" \ + " -P Purge all files of a package\n" \ + " -r Remove all but the configuration files for a package\n" \ + " -u Unpack a package, but don't configure it" #define dpkg_deb_trivial_usage \ - "[-cefxX] FILE [argument]" + "[-cefxX] FILE [argument]" #define dpkg_deb_full_usage \ - "Perform actions on Debian packages (.debs)\n\n" \ - "Options:\n" \ - "\t-c\tList contents of filesystem tree\n" \ - "\t-e\tExtract control files to [argument] directory\n" \ - "\t-f\tDisplay control field name starting with [argument]\n" \ - "\t-x\tExtract packages filesystem tree to directory\n" \ - "\t-X\tVerbose extract" + "Perform actions on Debian packages (.debs)" \ + "\n\nOptions:\n" \ + " -c List contents of filesystem tree\n" \ + " -e Extract control files to [argument] directory\n" \ + " -f Display control field name starting with [argument]\n" \ + " -x Extract packages filesystem tree to directory\n" \ + " -X Verbose extract" #define dpkg_deb_example_usage \ - "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" - -#ifdef CONFIG_FEATURE_DU_DEFALT_BLOCKSIZE_1K -#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) a -#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) -#else -#define USAGE_DU_DEFALT_BLOCKSIZE_1k(a) -#define USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k(a) a -#endif + "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" #define du_trivial_usage \ - "[-aHLdclsx" USAGE_HUMAN_READABLE("hm") "k] [FILE]..." + "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." #define du_full_usage \ - "Summarizes disk space used for each FILE and/or directory.\n" \ - "Disk space is printed in units of " \ - USAGE_DU_DEFALT_BLOCKSIZE_1k("1024") USAGE_NOT_DU_DEFALT_BLOCKSIZE_1k("512") \ - " bytes.\n\n" \ - "Options:\n" \ - "\t-a\tshow sizes of files in addition to directories\n" \ - "\t-H\tfollow symbolic links that are FILE command line args\n" \ - "\t-L\tfollow all symbolic links encountered\n" \ - "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \ - "\t-c\toutput a grand total\n" \ - "\t-l\tcount sizes many times if hard linked\n" \ - "\t-s\tdisplay only a total for each argument\n" \ - "\t-x\tskip directories on different filesystems\n" \ - USAGE_HUMAN_READABLE( \ - "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ - "\t-m\tprint sizes in megabytes\n" ) \ - "\t-k\tprint sizes in kilobytes" USAGE_DU_DEFALT_BLOCKSIZE_1k("(default)") + "Summarize disk space used for each FILE and/or directory.\n" \ + "Disk space is printed in units of " \ + USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ + SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ + " bytes." \ + "\n\nOptions:\n" \ + " -a Show sizes of files in addition to directories\n" \ + " -H Follow symbolic links that are FILE command line args\n" \ + " -L Follow all symbolic links encountered\n" \ + " -d N Limit output to directories (and files with -a) of depth < N\n" \ + " -c Output a grand total\n" \ + " -l Count sizes many times if hard linked\n" \ + " -s Display only a total for each argument\n" \ + " -x Skip directories on different filesystems\n" \ + USE_FEATURE_HUMAN_READABLE( \ + " -h Print sizes in human readable format (e.g., 1K 243M 2G )\n" \ + " -m Print sizes in megabytes\n" \ + ) \ + " -k Print sizes in kilobytes" \ + USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)") #define du_example_usage \ - "$ du\n" \ - "16 ./CVS\n" \ - "12 ./kernel-patches/CVS\n" \ - "80 ./kernel-patches\n" \ - "12 ./tests/CVS\n" \ - "36 ./tests\n" \ - "12 ./scripts/CVS\n" \ - "16 ./scripts\n" \ - "12 ./docs/CVS\n" \ - "104 ./docs\n" \ - "2417 .\n" + "$ du\n" \ + "16 ./CVS\n" \ + "12 ./kernel-patches/CVS\n" \ + "80 ./kernel-patches\n" \ + "12 ./tests/CVS\n" \ + "36 ./tests\n" \ + "12 ./scripts/CVS\n" \ + "16 ./scripts\n" \ + "12 ./docs/CVS\n" \ + "104 ./docs\n" \ + "2417 .\n" #define dumpkmap_trivial_usage \ - "> keymap" + "> keymap" #define dumpkmap_full_usage \ - "Prints out a binary keyboard translation table to standard output." + "Print out a binary keyboard translation table to standard output" #define dumpkmap_example_usage \ - "$ dumpkmap > keymap\n" + "$ dumpkmap > keymap\n" #define dumpleases_trivial_usage \ - "[-r|-a] [-f LEASEFILE]" + "[-r|-a] [-f LEASEFILE]" #define dumpleases_full_usage \ - "Displays the DHCP leases granted by udhcpd.\n\n" \ - "Options:\n" \ - "\t-f,\t--file=FILENAME\tLeases file to load\n" \ - "\t-r,\t--remaining\tInterpret lease times as time remaing\n" \ - "\t-a,\t--absolute\tInterpret lease times as expire time" + "Display DHCP leases granted by udhcpd" \ + "\n\nOptions:\n" \ + " -f, --file=FILENAME Leases file to load\n" \ + " -r, --remaining Interpret lease times as time remaining\n" \ + " -a, --absolute Interpret lease times as expire time" #define e2fsck_trivial_usage \ - "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ - "[-I inode_buffer_blocks] [-P process_inode_size] " \ - "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ - "[-E extended-options] device" + "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ + "[-I inode_buffer_blocks] [-P process_inode_size] " \ + "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ + "[-E extended-options] device" #define e2fsck_full_usage \ - "Check a Linux ext2/ext3 file system.\n\n" \ - "Options:\n" \ - "\t-p\tAutomatic repair (no questions)\n" \ - "\t-n\tMake no changes to the filesystem\n" \ - "\t-y\tAssume 'yes' to all questions\n" \ - "\t-c\tCheck for bad blocks and add them to the badblock list\n" \ - "\t-f\tForce checking even if filesystem is marked clean\n" \ - "\t-v\tBe verbose\n" \ - "\t-b superblock\tUse alternative superblock\n" \ - "\t-B blocksize\tForce blocksize when looking for superblock\n" \ - "\t-j journal\tSet location of the external journal\n" \ - "\t-l file\tAdd to badblocks list\n" \ - "\t-L file\tSet badblocks list" - -#ifdef CONFIG_FEATURE_FANCY_ECHO -# define USAGE_FANCY_ECHO(a) a -#else -# define USAGE_FANCY_ECHO(a) -#endif + "Check ext2/ext3 file system" \ + "\n\nOptions:\n" \ + " -p Automatic repair (no questions)\n" \ + " -n Make no changes to the filesystem\n" \ + " -y Assume 'yes' to all questions\n" \ + " -c Check for bad blocks and add them to the badblock list\n" \ + " -f Force checking even if filesystem is marked clean\n" \ + " -v Be verbose\n" \ + " -b superblock Use alternative superblock\n" \ + " -B blocksize Force blocksize when looking for superblock\n" \ + " -j journal Set location of the external journal\n" \ + " -l file Add to badblocks list\n" \ + " -L file Set badblocks list" #define echo_trivial_usage \ - USAGE_FANCY_ECHO("[-neE] ") "[ARG ...]" + USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]" #define echo_full_usage \ - "Prints the specified ARGs to stdout\n\n" \ - USAGE_FANCY_ECHO("Options:\n" \ - "\t-n\tsuppress trailing newline\n" \ - "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \ - "\t-E\tdisable interpretation of backslash-escaped characters") + "Print the specified ARGs to stdout" \ + USE_FEATURE_FANCY_ECHO( \ + "\n\nOptions:\n" \ + " -n Suppress trailing newline\n" \ + " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \ + " -E Disable interpretation of backslash-escaped characters" \ + ) #define echo_example_usage \ - "$ echo \"Erik is cool\"\n" \ - "Erik is cool\n" \ - USAGE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ - "Erik\n" \ - "is\n" \ - "cool\n" \ - "$ echo \"Erik\\nis\\ncool\"\n" \ - "Erik\\nis\\ncool\n") + "$ echo \"Erik is cool\"\n" \ + "Erik is cool\n" \ + USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ + "Erik\n" \ + "is\n" \ + "cool\n" \ + "$ echo \"Erik\\nis\\ncool\"\n" \ + "Erik\\nis\\ncool\n") #define eject_trivial_usage \ - "[-t] [DEVICE]" + "[-t] [-T] [DEVICE]" #define eject_full_usage \ - "Eject specified DEVICE (or default /dev/cdrom).\n\n" \ - "Options:\n" \ - "\t-t\tclose tray" + "Eject specified DEVICE (or default /dev/cdrom)" \ + "\n\nOptions:\n" \ + " -t Close tray\n" \ + " -T Open/close tray (toggle)" + +#define ed_trivial_usage "" +#define ed_full_usage "" #define env_trivial_usage \ - "[-iu] [-] [name=value]... [command]" + "[-iu] [-] [name=value]... [command]" #define env_full_usage \ - "Prints the current environment or runs a program after setting\n" \ - "up the specified environment.\n\n" \ - "Options:\n" \ - "\t-, -i\tstart with an empty environment\n" \ - "\t-u\tremove variable from the environment" + "Print the current environment or run a program after setting\n" \ + "up the specified environment" \ + "\n\nOptions:\n" \ + " -, -i Start with an empty environment\n" \ + " -u Remove variable from the environment" #define ether_wake_trivial_usage \ - "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" + "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" #define ether_wake_full_usage \ - "Send a magic packet to wake up sleeping machines.\n" \ - "MAC must be a station address (00:11:22:33:44:55) or\n" \ - " a hostname with a known 'ethers' entry.\n\n" \ - "Options:\n" \ - "\t-b\t\tSend wake-up packet to the broadcast address\n" \ - "\t-i iface\tUse interface ifname instead of the default \"eth0\"\n" \ - "\t-p pass\tAppend the four or six byte password PW to the packet" + "Send a magic packet to wake up sleeping machines.\n" \ + "MAC must be a station address (00:11:22:33:44:55) or\n" \ + "a hostname with a known 'ethers' entry." \ + "\n\nOptions:\n" \ + " -b Send wake-up packet to the broadcast address\n" \ + " -i iface Use interface ifname instead of the default \"eth0\"\n" \ + " -p pass Append the four or six byte password PW to the packet" #define expr_trivial_usage \ - "EXPRESSION" + "EXPRESSION" #define expr_full_usage \ - "Prints the value of EXPRESSION to standard output.\n\n" \ - "EXPRESSION may be:\n" \ - "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ - "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ - "\tARG1 < ARG2 ARG1 is less than ARG2\n" \ - "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \ - "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \ - "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \ - "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \ - "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \ - "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \ - "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \ - "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \ - "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \ - "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \ - "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \ - "\tmatch STRING REGEXP same as STRING : REGEXP\n" \ - "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \ - "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \ - "\t or 0\n" \ - "\tlength STRING length of STRING\n" \ - "\tquote TOKEN interpret TOKEN as a string, even if\n" \ - "\t it is a keyword like `match' or an\n" \ - "\t operator like `/'\n" \ - "\t( EXPRESSION ) value of EXPRESSION\n\n" \ - "Beware that many operators need to be escaped or quoted for shells.\n" \ - "Comparisons are arithmetic if both ARGs are numbers, else\n" \ - "lexicographical. Pattern matches return the string matched between \n" \ - "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \ - "of characters matched or 0." - + "Print the value of EXPRESSION to standard output.\n\n" \ + "EXPRESSION may be:\n" \ + " ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ + " ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ + " ARG1 < ARG2 ARG1 is less than ARG2\n" \ + " ARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \ + " ARG1 = ARG2 ARG1 is equal to ARG2\n" \ + " ARG1 != ARG2 ARG1 is unequal to ARG2\n" \ + " ARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \ + " ARG1 > ARG2 ARG1 is greater than ARG2\n" \ + " ARG1 + ARG2 Sum of ARG1 and ARG2\n" \ + " ARG1 - ARG2 Difference of ARG1 and ARG2\n" \ + " ARG1 * ARG2 Product of ARG1 and ARG2\n" \ + " ARG1 / ARG2 Quotient of ARG1 divided by ARG2\n" \ + " ARG1 % ARG2 Remainder of ARG1 divided by ARG2\n" \ + " STRING : REGEXP Anchored pattern match of REGEXP in STRING\n" \ + " match STRING REGEXP Same as STRING : REGEXP\n" \ + " substr STRING POS LENGTH Substring of STRING, POS counted from 1\n" \ + " index STRING CHARS Index in STRING where any CHARS is found, or 0\n" \ + " length STRING Length of STRING\n" \ + " quote TOKEN Interpret TOKEN as a string, even if\n" \ + " it is a keyword like 'match' or an\n" \ + " operator like '/'\n" \ + " (EXPRESSION) Value of EXPRESSION\n\n" \ + "Beware that many operators need to be escaped or quoted for shells.\n" \ + "Comparisons are arithmetic if both ARGs are numbers, else\n" \ + "lexicographical. Pattern matches return the string matched between\n" \ + "\\( and \\) or null; if \\( and \\) are not used, they return the number\n" \ + "of characters matched or 0." + +#if 0 /* bloaty */ +#define fakeidentd_trivial_usage \ + "[-b ip] [STRING]" +#define fakeidentd_full_usage \ + "Return a set string to auth requests" \ + "\n\nOptions:\n" \ + " -b Bind to ip address\n" \ + " STRING The ident answer string (default is nobody)" +#else /* inetd-only */ #define fakeidentd_trivial_usage \ - "[-b ip] [STRING]" + "[username]" #define fakeidentd_full_usage \ - "Returns a set string to auth requests\n\n" \ - "\t-b\tBind to ip address\n" \ - "\tSTRING\tThe ident answer string (default is nobody)" + "Return a (faked) ident response.\n" \ + "This applet is meant to run from inetd.\n" \ + "Optional argument is the username to return (default is 'nobody')." +#endif #define false_trivial_usage \ - "" + "" #define false_full_usage \ - "Return an exit code of FALSE (1)." + "Return an exit code of FALSE (1)" #define false_example_usage \ - "$ false\n" \ - "$ echo $?\n" \ - "1\n" + "$ false\n" \ + "$ echo $?\n" \ + "1\n" #define fbset_trivial_usage \ - "[options] [mode]" + "[options] [mode]" #define fbset_full_usage \ - "Show and modify frame buffer settings" + "Show and modify frame buffer settings" #define fbset_example_usage \ - "$ fbset\n" \ - "mode \"1024x768-76\"\n" \ - "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ - "\tgeometry 1024 768 1024 768 16\n" \ - "\ttimings 12714 128 32 16 4 128 4\n" \ - "\taccel false\n" \ - "\trgba 5/11,6/5,5/0,0/0\n" \ - "endmode\n" + "$ fbset\n" \ + "mode \"1024x768-76\"\n" \ + " # D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ + " geometry 1024 768 1024 768 16\n" \ + " timings 12714 128 32 16 4 128 4\n" \ + " accel false\n" \ + " rgba 5/11,6/5,5/0,0/0\n" \ + "endmode\n" #define fdflush_trivial_usage \ - "DEVICE" + "DEVICE" #define fdflush_full_usage \ - "Forces floppy disk drive to detect disk change" + "Force floppy disk drive to detect disk change" #define fdformat_trivial_usage \ - "[-n] DEVICE" + "[-n] DEVICE" #define fdformat_full_usage \ - "Low-level formats a floppy disk\n\n" \ - "Options:\n" \ - "\t-n\tDon't verify after format" + "Format floppy disk" \ + "\n\nOptions:\n" \ + " -n Don't verify after format" #define fdisk_trivial_usage \ - "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" + "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" #define fdisk_full_usage \ - "Change partition table\n" \ - "Options:\n" \ - "\t-l List partition table(s)\n" \ - "\t-u Give Start and End in sector (instead of cylinder) units\n" \ - "\t-s PARTITION Give partition size(s) in blocks\n" \ - "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \ - "\t-C CYLINDERS Set the number of cylinders\n" \ - "\t-H HEADS Set the number of heads\n" \ - "\t-S SECTORS Set the number of sectors\n" \ - "\t-v Give fdisk version" - -#ifdef CONFIG_FEATURE_FIND_TYPE -# define USAGE_FIND_TYPE(a) a -#else -# define USAGE_FIND_TYPE(a) -#endif -#ifdef CONFIG_FEATURE_FIND_PERM -# define USAGE_FIND_PERM(a) a -#else -# define USAGE_FIND_PERM(a) -#endif -#ifdef CONFIG_FEATURE_FIND_MTIME -# define USAGE_FIND_MTIME(a) a -#else -# define USAGE_FIND_MTIME(a) -#endif -#ifdef CONFIG_FEATURE_FIND_MMIN - #define USAGE_FIND_MMIN(a) a -#else - #define USAGE_FIND_MMIN(a) -#endif -#ifdef CONFIG_FEATURE_FIND_NEWER -# define USAGE_FIND_NEWER(a) a -#else -# define USAGE_FIND_NEWER(a) -#endif -#ifdef CONFIG_FEATURE_FIND_INUM -# define USAGE_FIND_INUM(a) a -#else -# define USAGE_FIND_INUM(a) -#endif -#ifdef CONFIG_FEATURE_FIND_EXEC -# define USAGE_FIND_EXEC(a) a -#else -# define USAGE_FIND_EXEC(a) -#endif + "Change partition table" \ + "\n\nOptions:\n" \ + " -l List partition table(s)\n" \ + " -u Give Start and End in sector (instead of cylinder) units\n" \ + " -s PARTITION Give partition size(s) in blocks\n" \ + " -b 2048 (for certain MO disks) use 2048-byte sectors\n" \ + " -C CYLINDERS Set the number of cylinders\n" \ + " -H HEADS Set the number of heads\n" \ + " -S SECTORS Set the number of sectors\n" \ + " -v Give fdisk version" #define find_trivial_usage \ - "[PATH...] [EXPRESSION]" + "[PATH...] [EXPRESSION]" #define find_full_usage \ - "Search for files in a directory hierarchy. The default PATH is\n" \ - "the current directory; default EXPRESSION is '-print'\n" \ - "\nEXPRESSION may consist of:\n" \ - "\t-follow\t\tDereference symbolic links\n" \ - "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN\n" \ - "\t-print\t\tPrint (default and assumed)\n" \ - USAGE_FIND_TYPE( \ - "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \ -) USAGE_FIND_PERM( \ - "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \ -) USAGE_FIND_MTIME( \ - "\n\t-mtime DAYS\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \ -) USAGE_FIND_MMIN( \ - "\n\t-mmin MINS\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) minutes" \ -) USAGE_FIND_NEWER( \ - "\n\t-newer FILE\tModified time is more recent than FILE's" \ -) USAGE_FIND_INUM( \ - "\n\t-inum N\t\tFile has inode number N" \ -) USAGE_FIND_EXEC( \ - "\n\t-exec CMD\tExecute CMD with all instances of {} replaced by the" \ - "\n\t\t\tfiles matching EXPRESSION") + "Search for files in a directory hierarchy. The default PATH is\n" \ + "the current directory; default EXPRESSION is '-print'\n" \ + "\nEXPRESSION may consist of:\n" \ + " -follow Dereference symbolic links\n" \ + " -name PATTERN File name (leading directories removed) matches PATTERN\n" \ + " -print Print (default and assumed)" \ + USE_FEATURE_FIND_PRINT0( \ + "\n -print0 Delimit output with null characters rather than" \ + "\n newlines" \ + ) USE_FEATURE_FIND_TYPE( \ + "\n -type X Filetype matches X (where X is one of: f,d,l,b,c,...)" \ + ) USE_FEATURE_FIND_PERM( \ + "\n -perm PERMS Permissions match any of (+NNN); all of (-NNN);" \ + "\n or exactly (NNN)" \ + ) USE_FEATURE_FIND_MTIME( \ + "\n -mtime DAYS Modified time is greater than (+N); less than (-N);" \ + "\n Or exactly (N) days" \ + ) USE_FEATURE_FIND_MMIN( \ + "\n -mmin MINS Modified time is greater than (+N); less than (-N);" \ + "\n or exactly (N) minutes" \ + ) USE_FEATURE_FIND_NEWER( \ + "\n -newer FILE Modified time is more recent than FILE's" \ + ) USE_FEATURE_FIND_INUM( \ + "\n -inum N File has inode number N" \ + ) USE_FEATURE_FIND_EXEC( \ + "\n -exec CMD Execute CMD with all instances of {} replaced by the" \ + "\n files matching EXPRESSION" \ + ) USE_DESKTOP( \ + "\n -size N File size is N" \ + "\n -prune Stop traversing current subtree" \ + "\n (expr) Group" \ + ) #define find_example_usage \ - "$ find / -name passwd\n" \ - "/etc/passwd\n" + "$ find / -name passwd\n" \ + "/etc/passwd\n" #define fold_trivial_usage \ - "[-bs] [-w WIDTH] [FILE]" + "[-bs] [-w WIDTH] [FILE]" #define fold_full_usage \ - "Wrap input lines in each FILE (standard input by default), writing to\n" \ - "standard output.\n\n" \ - "Options:\n" \ - "\t-b\tcount bytes rather than columns\n" \ - "\t-s\tbreak at spaces\n" \ - "\t-w\tuse WIDTH columns instead of 80" + "Wrap input lines in each FILE (standard input by default), writing to\n" \ + "standard output" \ + "\n\nOptions:\n" \ + " -b Count bytes rather than columns\n" \ + " -s Break at spaces\n" \ + " -w Use WIDTH columns instead of 80" #define free_trivial_usage \ - "" + "" #define free_full_usage \ - "Displays the amount of free and used system memory" + "Display the amount of free and used system memory" #define free_example_usage \ - "$ free\n" \ - " total used free shared buffers\n" \ - " Mem: 257628 248724 8904 59644 93124\n" \ - " Swap: 128516 8404 120112\n" \ - "Total: 386144 257128 129016\n" \ + "$ free\n" \ + " total used free shared buffers\n" \ + " Mem: 257628 248724 8904 59644 93124\n" \ + " Swap: 128516 8404 120112\n" \ + "Total: 386144 257128 129016\n" \ #define freeramdisk_trivial_usage \ - "DEVICE" + "DEVICE" #define freeramdisk_full_usage \ - "Frees all memory used by the specified ramdisk." + "Free all memory used by the specified ramdisk" #define freeramdisk_example_usage \ - "$ freeramdisk /dev/ram2\n" + "$ freeramdisk /dev/ram2\n" #define fsck_trivial_usage \ - "[-ANPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]" + "[-ANPRTV] [ -C fd ] [-t fstype] [fs-options] [filesys ...]" #define fsck_full_usage \ - "Check and repair filesystems.\n\n" \ - "Options:\n" \ - "\t-A\tWalk /etc/fstab and check all filesystems\n" \ - "\t-N\tDon't execute, just show what would be done\n" \ - "\t-P\tWhen using -A, check filesystems in parallel\n" \ - "\t-R\tWhen using -A, skip the root filesystem\n" \ - "\t-T\tDon't show title on startup\n" \ - "\t-V\tVerbose mode\n" \ - "\t-C\tWrite status information to specified filedescriptor\n" \ - "\t-t\tList of filesystem types to check" + "Check and repair filesystems" \ + "\n\nOptions:\n" \ + " -A Walk /etc/fstab and check all filesystems\n" \ + " -N Don't execute, just show what would be done\n" \ + " -P When using -A, check filesystems in parallel\n" \ + " -R When using -A, skip the root filesystem\n" \ + " -T Don't show title on startup\n" \ + " -V Verbose\n" \ + " -C n Write status information to specified filedescriptor\n" \ + " -t type List of filesystem types to check" #define fsck_minix_trivial_usage \ - "[-larvsmf] /dev/name" + "[-larvsmf] /dev/name" #define fsck_minix_full_usage \ - "Performs a consistency check for MINIX filesystems.\n\n" \ - "Options:\n" \ - "\t-l\tLists all filenames\n" \ - "\t-r\tPerform interactive repairs\n" \ - "\t-a\tPerform automatic repairs\n" \ - "\t-v\tverbose\n" \ - "\t-s\tOutputs super-block information\n" \ - "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \ - "\t-f\tForce file system check" + "Perform a consistency check for MINIX filesystems" \ + "\n\nOptions:\n" \ + " -l Lists all filenames\n" \ + " -r Perform interactive repairs\n" \ + " -a Perform automatic repairs\n" \ + " -v Verbose\n" \ + " -s Outputs super-block information\n" \ + " -m Activates MINIX-like \"mode not cleared\" warnings\n" \ + " -f Force file system check" #define ftpget_trivial_usage \ - "[options] remote-host local-file remote-file" + "[options] remote-host local-file remote-file" #define ftpget_full_usage \ - "Retrieve a remote file via FTP.\n\n" \ - "Options:\n" \ - "\t-c, --continue Continue a previous transfer\n" \ - "\t-v, --verbose Verbose\n" \ - "\t-u, --username Username to be used\n" \ - "\t-p, --password Password to be used\n" \ - "\t-P, --port Port number to be used" + "Retrieve a remote file via FTP" \ + "\n\nOptions:\n" \ + " -c, --continue Continue a previous transfer\n" \ + " -v, --verbose Verbose\n" \ + " -u, --username Username to be used\n" \ + " -p, --password Password to be used\n" \ + " -P, --port Port number to be used" #define ftpput_trivial_usage \ - "[options] remote-host remote-file local-file" + "[options] remote-host remote-file local-file" #define ftpput_full_usage \ - "Store a local file on a remote machine via FTP.\n\n" \ - "Options:\n" \ - "\t-v, --verbose Verbose\n" \ - "\t-u, --username Username to be used\n" \ - "\t-p, --password Password to be used\n" \ - "\t-P, --port Port number to be used" + "Store a local file on a remote machine via FTP" \ + "\n\nOptions:\n" \ + " -v, --verbose Verbose\n" \ + " -u, --username Username to be used\n" \ + " -p, --password Password to be used\n" \ + " -P, --port Port number to be used" #define fuser_trivial_usage \ - "[options] file OR port/proto" + "[options] file OR port/proto" #define fuser_full_usage \ - "Options:\n" \ - "\t-m Show all processes on the same mounted fs\n" \ - "\t-k Kill all processes that match.\n" \ - "\t-s Don't print or kill anything.\n" \ - "\t-4 When using port/proto only search IPv4 space\n" \ - "\t-6 When using port/proto only search IPv6 space\n" \ - "\t-SIGNAL When used with -k, this signal will be used to kill" + "Options:\n" \ + " -m Show all processes on the same mounted fs\n" \ + " -k Kill all processes that match\n" \ + " -s Don't print or kill anything\n" \ + " -4 When using port/proto only search IPv4 space\n" \ + " -6 When using port/proto only search IPv6 space\n" \ + " -SIGNAL When used with -k, this signal will be used to kill" #define getopt_trivial_usage \ - "[OPTIONS]..." + "[OPTIONS]..." #define getopt_full_usage \ - "Parse command options\n" \ - "\t-a, --alternative Allow long options starting with single -\n" \ - "\t-l, --longoptions=longopts Long options to be recognized\n" \ - "\t-n, --name=progname The name under which errors are reported\n" \ - "\t-o, --options=optstring Short options to be recognized\n" \ - "\t-q, --quiet Disable error reporting by getopt(3)\n" \ - "\t-Q, --quiet-output No normal output\n" \ - "\t-s, --shell=shell Set shell quoting conventions\n" \ - "\t-T, --test Test for getopt(1) version\n" \ - "\t-u, --unquoted Do not quote the output" + "Parse command options\n" \ + " -a, --alternative Allow long options starting with single -\n" \ + " -l, --longoptions=longopts Long options to be recognized\n" \ + " -n, --name=progname The name under which errors are reported\n" \ + " -o, --options=optstring Short options to be recognized\n" \ + " -q, --quiet Disable error reporting by getopt(3)\n" \ + " -Q, --quiet-output No normal output\n" \ + " -s, --shell=shell Set shell quoting conventions\n" \ + " -T, --test Test for getopt(1) version\n" \ + " -u, --unquoted Do not quote the output" #define getopt_example_usage \ - "$ cat getopt.test\n" \ - "#!/bin/sh\n" \ - "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ - " -n 'example.busybox' -- \"$@\"`\n" \ - "if [ $? != 0 ] ; then exit 1 ; fi\n" \ - "eval set -- \"$GETOPT\"\n" \ - "while true ; do\n" \ - " case $1 in\n" \ - " -a|--a-long) echo \"Option a\" ; shift ;;\n" \ - " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \ - " -c|--c-long)\n" \ - " case \"$2\" in\n" \ - " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \ - " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \ - " esac ;;\n" \ - " --) shift ; break ;;\n" \ - " *) echo \"Internal error!\" ; exit 1 ;;\n" \ - " esac\n" \ - "done\n" + "$ cat getopt.test\n" \ + "#!/bin/sh\n" \ + "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ + " -n 'example.busybox' -- \"$@\"`\n" \ + "if [ $? != 0 ] ; then exit 1 ; fi\n" \ + "eval set -- \"$GETOPT\"\n" \ + "while true ; do\n" \ + " case $1 in\n" \ + " -a|--a-long) echo \"Option a\" ; shift ;;\n" \ + " -b|--b-long) echo \"Option b, argument '$2'\" ; shift 2 ;;\n" \ + " -c|--c-long)\n" \ + " case \"$2\" in\n" \ + " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \ + " *) echo \"Option c, argument '$2'\" ; shift 2 ;;\n" \ + " esac ;;\n" \ + " --) shift ; break ;;\n" \ + " *) echo \"Internal error!\" ; exit 1 ;;\n" \ + " esac\n" \ + "done\n" #define getty_trivial_usage \ - "[OPTIONS]... baud_rate,... line [termtype]" + "[OPTIONS]... baud_rate,... line [termtype]" #define getty_full_usage \ - "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \ - "Options:\n" \ - "\t-h\t\tEnable hardware (RTS/CTS) flow control\n" \ - "\t-i\t\tDo not display /etc/issue before running login\n" \ - "\t-L\t\tLocal line, so do not do carrier detect\n" \ - "\t-m\t\tGet baud rate from modem's CONNECT status message\n" \ - "\t-w\t\tWait for a CR or LF before sending /etc/issue\n" \ - "\t-n\t\tDo not prompt the user for a login name\n" \ - "\t-f issue_file\tDisplay issue_file instead of /etc/issue\n" \ - "\t-l login_app\tInvoke login_app instead of /bin/login\n" \ - "\t-t timeout\tTerminate after timeout if no username is read\n" \ - "\t-I initstring\tSets the init string to send before anything else\n" \ - "\t-H login_host\tLog login_host into the utmp file as the hostname" - -#if ENABLE_FEATURE_GREP_EGREP_ALIAS -#define USAGE_GREP_E(a) a -#else -#define USAGE_GREP_E(a) -#endif -#if ENABLE_FEATURE_GREP_CONTEXT -#define USAGE_GREP_CTX(a) a -#else -#define USAGE_GREP_CTX(a) -#endif + "Open a tty, prompt for a login name, then invoke /bin/login" \ + "\n\nOptions:\n" \ + " -h Enable hardware (RTS/CTS) flow control\n" \ + " -i Do not display /etc/issue before running login\n" \ + " -L Local line, so do not do carrier detect\n" \ + " -m Get baud rate from modem's CONNECT status message\n" \ + " -w Wait for a CR or LF before sending /etc/issue\n" \ + " -n Do not prompt the user for a login name\n" \ + " -f issue_file Display issue_file instead of /etc/issue\n" \ + " -l login_app Invoke login_app instead of /bin/login\n" \ + " -t timeout Terminate after timeout if no username is read\n" \ + " -I initstring Sets the init string to send before anything else\n" \ + " -H login_host Log login_host into the utmp file as the hostname" + #define grep_trivial_usage \ - "[-ihHnqvs" \ - USAGE_GREP_E("E") \ - USAGE_GREP_CTX("ABC") \ - "] PATTERN [FILEs...]" + "[-rihHnqvso" \ + USE_FEATURE_GREP_EGREP_ALIAS("E") \ + USE_FEATURE_GREP_CONTEXT("ABC") \ + "] PATTERN [FILEs...]" #define grep_full_usage \ - "Search for PATTERN in each FILE or standard input.\n\n" \ - "Options:\n" \ - "\t-H\tprefix output lines with filename where match was found\n" \ - "\t-h\tsuppress the prefixing filename on output\n" \ - "\t-i\tignore case distinctions\n" \ - "\t-l\tlist names of files that match\n" \ - "\t-L\tlist names of files that do not match\n" \ - "\t-n\tprint line number with output lines\n" \ - "\t-q\tbe quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \ - "\t-v\tselect non-matching lines\n" \ - "\t-s\tsuppress file open/read error messages\n" \ - "\t-c\tonly print count of matching lines\n" \ - "\t-f\tread PATTERN from file\n" \ - "\t-e\tPATTERN is a regular expression\n" \ - "\t-F\tPATTERN is a set of newline-separated strings" \ - USAGE_GREP_E("\n\t-E\tPATTERN is an extended regular expression") \ - USAGE_GREP_CTX("\n\t-A\tprint NUM lines of trailing context") \ - USAGE_GREP_CTX("\n\t-B\tprint NUM lines of leading context") \ - USAGE_GREP_CTX("\n\t-C\tprint NUM lines of output context") + "Search for PATTERN in each FILE or standard input" \ + "\n\nOptions:\n" \ + " -H Prefix output lines with filename where match was found\n" \ + " -h Suppress the prefixing filename on output\n" \ + " -r Recurse subdirectories\n" \ + " -i Ignore case distinctions\n" \ + " -l List names of files that match\n" \ + " -L List names of files that do not match\n" \ + " -n Print line number with output lines\n" \ + " -q Be quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \ + " -v Select non-matching lines\n" \ + " -s Suppress file open/read error messages\n" \ + " -c Only print count of matching lines\n" \ + " -f Read PATTERN from file\n" \ + " -o Show only the part of a line that matches PATTERN\n" \ + " -e PATTERN is a regular expression\n" \ + " -F PATTERN is a set of newline-separated strings" \ + USE_FEATURE_GREP_EGREP_ALIAS( \ + "\n -E PATTERN is an extended regular expression") \ + USE_FEATURE_GREP_CONTEXT( \ + "\n -A Print NUM lines of trailing context") \ + USE_FEATURE_GREP_CONTEXT( \ + "\n -B Print NUM lines of leading context") \ + USE_FEATURE_GREP_CONTEXT( \ + "\n -C Print NUM lines of output context") #define grep_example_usage \ - "$ grep root /etc/passwd\n" \ - "root:x:0:0:root:/root:/bin/bash\n" \ - "$ grep ^[rR]oo. /etc/passwd\n" \ - "root:x:0:0:root:/root:/bin/bash\n" + "$ grep root /etc/passwd\n" \ + "root:x:0:0:root:/root:/bin/bash\n" \ + "$ grep ^[rR]oo. /etc/passwd\n" \ + "root:x:0:0:root:/root:/bin/bash\n" #define gunzip_trivial_usage \ - "[OPTION]... FILE" + "[OPTION]... FILE" #define gunzip_full_usage \ - "Uncompress FILE (or standard input if FILE is '-').\n\n" \ - "Options:\n" \ - "\t-c\tWrite output to standard output\n" \ - "\t-f\tForce read when source is a terminal\n" \ - "\t-t\tTest compressed file integrity" + "Uncompress FILE (or standard input if FILE is '-')" \ + "\n\nOptions:\n" \ + " -c Write output to standard output\n" \ + " -f Force read when source is a terminal\n" \ + " -t Test compressed file integrity" #define gunzip_example_usage \ - "$ ls -la /tmp/BusyBox*\n" \ - "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ - "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ - "$ ls -la /tmp/BusyBox*\n" \ - "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" + "$ ls -la /tmp/BusyBox*\n" \ + "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ + "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ + "$ ls -la /tmp/BusyBox*\n" \ + "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" #define gzip_trivial_usage \ - "[OPTION]... [FILE]..." + "[OPTION]... [FILE]..." #define gzip_full_usage \ - "Compress FILE(s) with maximum compression.\n" \ - "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \ - "Options:\n" \ - "\t-c\tWrite output to standard output instead of FILE.gz\n" \ - "\t-d\tDecompress\n" \ - "\t-f\tForce write when destination is a terminal" + "Compress FILE(s) with maximum compression.\n" \ + "When FILE is '-' or unspecified, reads standard input. Implies -c." \ + "\n\nOptions:\n" \ + " -c Write output to standard output instead of FILE.gz\n" \ + " -d Decompress\n" \ + " -f Force write when destination is a terminal" #define gzip_example_usage \ - "$ ls -la /tmp/busybox*\n" \ - "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ - "$ gzip /tmp/busybox.tar\n" \ - "$ ls -la /tmp/busybox*\n" \ - "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" + "$ ls -la /tmp/busybox*\n" \ + "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ + "$ gzip /tmp/busybox.tar\n" \ + "$ ls -la /tmp/busybox*\n" \ + "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" #define halt_trivial_usage \ - "[-d] [-n] [-f]" + "[-d] [-n] [-f]" #define halt_full_usage \ - "Halt the system.\n" \ - "Options:\n" \ - "\t-d\t\tdelay interval for halting\n" \ - "\t-n\t\tno call to sync()\n" \ - "\t-f\t\tforce halt (don't go through init)" - -#ifdef CONFIG_FEATURE_HDPARM_GET_IDENTITY -#define USAGE_HDPARM_IDENT(a) a -#else -#define USAGE_HDPARM_IDENT(a) -#endif - -#ifdef CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF -#define USAGE_SCAN_HWIF(a) a -#else -#define USAGE_SCAN_HWIF(a) -#endif - -#ifdef CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF -#define USAGE_UNREGISTER_HWIF(a) a -#else -#define USAGE_UNREGISTER_HWIF(a) -#endif - -#ifdef CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET -#define USAGE_DRIVE_RESET(a) a -#else -#define USAGE_DRIVE_RESET(a) -#endif - -#ifdef CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF -#define USAGE_TRISTATE_HWIF(a) a -#else -#define USAGE_TRISTATE_HWIF(a) -#endif - -#ifdef CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA -#define USAGE_GETSET_DMA(a) a -#else -#define USAGE_GETSET_DMA(a) -#endif + "Halt the system" \ + "\n\nOptions:\n" \ + " -d Delay interval for halting\n" \ + " -n No call to sync()\n" \ + " -f Force halt (don't go through init)" #define hdparm_trivial_usage \ - "[options] [device] .." + "[options] [device] .." #define hdparm_full_usage \ - "Options:" \ - "\t-a get/set fs readahead\n" \ - "\t-A set drive read-lookahead flag (0/1)\n" \ - "\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ - "\t-B set Advanced Power Management setting (1-255)\n" \ - "\t-c get/set IDE 32-bit IO setting\n" \ - "\t-C check IDE power mode status\n" \ - USAGE_GETSET_DMA("\t-d get/set using_dma flag\n") \ - "\t-D enable/disable drive defect-mgmt\n" \ - "\t-f flush buffer cache for device on exit\n" \ - "\t-g display drive geometry\n" \ - "\t-h display terse usage information\n" \ - "\t-i display drive identification\n" \ - USAGE_HDPARM_IDENT("\t-I detailed/current information directly from drive\n") \ - USAGE_HDPARM_IDENT("\t-Istdin similar to -I, but wants /proc/ide/" "*" "/hd?/identify as input\n") \ - "\t-k get/set keep_settings_over_reset flag (0/1)\n" \ - "\t-K set drive keep_features_over_reset flag (0/1)\n" \ - "\t-L set drive doorlock (0/1) (removable harddisks only)\n" \ - "\t-m get/set multiple sector count\n" \ - "\t-n get/set ignore-write-errors flag (0/1)\n" \ - "\t-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ - "\t-P set drive prefetch count\n" \ - "\t-q change next setting quietly\n" \ - "\t-Q get/set DMA tagged-queuing depth (if supported)\n" \ - "\t-r get/set readonly flag (DANGEROUS to set)\n" \ - USAGE_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \ - "\t-S set standby (spindown) timeout\n" \ - "\t-t perform device read timings\n" \ - "\t-T perform cache read timings\n" \ - "\t-u get/set unmaskirq flag (0/1)\n" \ - USAGE_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \ - "\t-v defaults; same as -mcudkrag for IDE drives\n" \ - "\t-V display program version and exit immediately\n" \ - USAGE_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \ - "\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \ - USAGE_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \ - "\t-X set IDE xfer mode (DANGEROUS)\n" \ - "\t-y put IDE drive in standby mode\n" \ - "\t-Y put IDE drive to sleep\n" \ - "\t-Z disable Seagate auto-powersaving mode\n" \ - "\t-z re-read partition table" - -#ifdef CONFIG_FEATURE_FANCY_HEAD -#define USAGE_FANCY_HEAD(a) a -#else -#define USAGE_FANCY_HEAD(a) -#endif + USE_FEATURE_HDPARM_GET_IDENTITY( \ + "If no device name is specified try to read from stdin.\n\n") \ + "Options:\n" \ + " -a Get/set fs readahead\n" \ + " -A Set drive read-lookahead flag (0/1)\n" \ + " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ + " -B Set Advanced Power Management setting (1-255)\n" \ + " -c Get/set IDE 32-bit IO setting\n" \ + " -C Check IDE power mode status\n" \ + USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \ + " -d Get/set using_dma flag\n") \ + " -D Enable/disable drive defect-mgmt\n" \ + " -f Flush buffer cache for device on exit\n" \ + " -g Display drive geometry\n" \ + " -h Display terse usage information\n" \ + USE_FEATURE_HDPARM_GET_IDENTITY( \ + " -i Display drive identification\n") \ + USE_FEATURE_HDPARM_GET_IDENTITY( \ + " -I Detailed/current information directly from drive\n") \ + " -k Get/set keep_settings_over_reset flag (0/1)\n" \ + " -K Set drive keep_features_over_reset flag (0/1)\n" \ + " -L Set drive doorlock (0/1) (removable harddisks only)\n" \ + " -m Get/set multiple sector count\n" \ + " -n Get/set ignore-write-errors flag (0/1)\n" \ + " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ + " -P Set drive prefetch count\n" \ + " -q Change next setting quietly\n" \ + " -Q Get/set DMA tagged-queuing depth (if supported)\n" \ + " -r Get/set readonly flag (DANGEROUS to set)\n" \ + USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \ + " -R Register an IDE interface (DANGEROUS)\n") \ + " -S Set standby (spindown) timeout\n" \ + " -t Perform device read timings\n" \ + " -T Perform cache read timings\n" \ + " -u Get/set unmaskirq flag (0/1)\n" \ + USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \ + " -U Un-register an IDE interface (DANGEROUS)\n") \ + " -v Defaults; same as -mcudkrag for IDE drives\n" \ + " -V Display program version and exit immediately\n" \ + USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \ + " -w Perform device reset (DANGEROUS)\n") \ + " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \ + USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \ + " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \ + " -X Set IDE xfer mode (DANGEROUS)\n" \ + " -y Put IDE drive in standby mode\n" \ + " -Y Put IDE drive to sleep\n" \ + " -Z Disable Seagate auto-powersaving mode\n" \ + " -z Re-read partition table" #define head_trivial_usage \ - "[OPTION]... [FILE]..." + "[OPTION]... [FILE]..." #define head_full_usage \ - "Print first 10 lines of each FILE to standard output.\n" \ - "With more than one FILE, precede each with a header giving the\n" \ - "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ - "Options:\n" \ - "\t-n NUM\t\tPrint first NUM lines instead of first 10" \ - USAGE_FANCY_HEAD( \ - "\n\t-c NUM\t\toutput the first NUM bytes\n" \ - "\t-q\t\tnever output headers giving file names\n" \ - "\t-v\t\talways output headers giving file names" ) + "Print first 10 lines of each FILE to standard output.\n" \ + "With more than one FILE, precede each with a header giving the\n" \ + "file name. With no FILE, or when FILE is -, read standard input." \ + "\n\nOptions:" \ + "\n -n NUM Print first NUM lines instead of first 10" \ + USE_FEATURE_FANCY_HEAD( \ + "\n -c NUM Output the first NUM bytes" \ + "\n -q Never output headers giving file names" \ + "\n -v Always output headers giving file names") #define head_example_usage \ - "$ head -n 2 /etc/passwd\n" \ - "root:x:0:0:root:/root:/bin/bash\n" \ - "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" + "$ head -n 2 /etc/passwd\n" \ + "root:x:0:0:root:/root:/bin/bash\n" \ + "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" #define hexdump_trivial_usage \ - "[-[bcCdefnosvx]] [OPTION] FILE" + "[-[bcCdefnosvx]] [OPTION] FILE" #define hexdump_full_usage \ - "The hexdump utility is a filter which displays the specified files,\n" \ - "or the standard input, if no files are specified, in a user specified\n" \ - "format\n" \ - "\t-b\t\tOne-byte octal display\n" \ - "\t-c\t\tOne-byte character display\n" \ - "\t-C\t\tCanonical hex+ASCII, 16 bytes per line\n" \ - "\t-d\t\tTwo-byte decimal display\n" \ - "\t-e FORMAT STRING\n" \ - "\t-f FORMAT FILE\n" \ - "\t-n LENGTH\tInterpret only length bytes of input\n" \ - "\t-o\t\tTwo-byte octal display\n" \ - "\t-s OFFSET\tSkip offset byte\n" \ - "\t-v\t\tdisplay all input data\n" \ - "\t-x\t\tTwo-byte hexadecimal display" + "Display file(s) or standard input in a user specified format" \ + "\n\nOptions:\n" \ + " -b One-byte octal display\n" \ + " -c One-byte character display\n" \ + " -C Canonical hex+ASCII, 16 bytes per line\n" \ + " -d Two-byte decimal display\n" \ + " -e FORMAT STRING\n" \ + " -f FORMAT FILE\n" \ + " -n LENGTH Interpret only length bytes of input\n" \ + " -o Two-byte octal display\n" \ + " -s OFFSET Skip offset bytes\n" \ + " -v Display all input data\n" \ + " -x Two-byte hexadecimal display" #define hostid_trivial_usage \ - "" + "" #define hostid_full_usage \ - "Print out a unique 32-bit identifier for the machine." + "Print out a unique 32-bit identifier for the machine" #define hostname_trivial_usage \ - "[OPTION] {hostname | -F FILE}" + "[OPTION] {hostname | -F FILE}" #define hostname_full_usage \ - "Get or set the hostname or DNS domain name. If a hostname is given\n" \ - "(or FILE with the -F parameter), the host name will be set.\n\n" \ - "Options:\n" \ - "\t-s\tShort\n" \ - "\t-i\tAddresses for the hostname\n" \ - "\t-d\tDNS domain name\n" \ - "\t-f\tFully qualified domain name\n" \ - "\t-F FILE\tUse the contents of FILE to specify the hostname" + "Get or set the hostname or DNS domain name. If a hostname is given\n" \ + "(or FILE with the -F parameter), the host name will be set." \ + "\n\nOptions:\n" \ + " -s Short\n" \ + " -i Addresses for the hostname\n" \ + " -d DNS domain name\n" \ + " -f Fully qualified domain name\n" \ + " -F FILE Use the contents of FILE to specify the hostname" #define hostname_example_usage \ - "$ hostname\n" \ - "sage\n" - -#ifdef CONFIG_FEATURE_HTTPD_BASIC_AUTH -# define USAGE_HTTPD_BASIC_AUTH(a) a -# ifdef CONFIG_FEATURE_HTTPD_AUTH_MD5 -# define USAGE_HTTPD_AUTH_MD5(a) a -# else -# define USAGE_HTTPD_AUTH_MD5(a) -# endif -#else -# define USAGE_HTTPD_BASIC_AUTH(a) -# define USAGE_HTTPD_AUTH_MD5(a) -#endif -#ifdef CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY -# define USAGE_HTTPD_STANDALONE(a) -# define USAGE_HTTPD_SETUID(a) -#else -# define USAGE_HTTPD_STANDALONE(a) a -# ifdef CONFIG_FEATURE_HTTPD_SETUID -# define USAGE_HTTPD_SETUID(a) a -# else -# define USAGE_HTTPD_SETUID(a) -# endif -#endif + "$ hostname\n" \ + "sage\n" + #define httpd_trivial_usage \ - "[-c ]" \ - USAGE_HTTPD_STANDALONE(" [-p ]") \ - USAGE_HTTPD_SETUID(" [-u user]") \ - USAGE_HTTPD_BASIC_AUTH(" [-r ]") \ - USAGE_HTTPD_AUTH_MD5(" [-m pass]") \ - " [-h home]" \ - " [-d/-e ]" + "[-c ]" \ + " [-p ]" \ + " [-i] [-f]" \ + USE_FEATURE_HTTPD_SETUID(" [-u user[:grp]]") \ + USE_FEATURE_HTTPD_BASIC_AUTH(" [-r ]") \ + USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \ + " [-h home]" \ + " [-d/-e ]" #define httpd_full_usage \ - "Listens for incoming http server requests.\n\n" \ - "Options:\n" \ - "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \ - USAGE_HTTPD_STANDALONE("\t-p PORT\tServer port (default 80)\n") \ - USAGE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privileges port\n") \ - USAGE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \ - USAGE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \ - "\t-h HOME \tSpecifies http HOME directory (default ./)\n" \ - "\t-e STRING\tHtml encode STRING\n" \ - "\t-d STRING\tURL decode STRING" + "Listen for incoming http server requests" \ + "\n\nOptions:\n" \ + " -c FILE Specifies configuration file. (default httpd.conf)\n" \ + " -p PORT Server port (default 80)\n" \ + " -i Assume that we are started from inetd\n" \ + " -f Do not daemonize\n" \ + USE_FEATURE_HTTPD_SETUID( \ + " -u USER[:GRP] Set uid/gid after binding to port\n") \ + USE_FEATURE_HTTPD_BASIC_AUTH( \ + " -r REALM Authentication Realm for Basic Authentication\n") \ + USE_FEATURE_HTTPD_AUTH_MD5( \ + " -m PASS Crypt PASS with md5 algorithm\n") \ + " -h HOME Specifies http HOME directory (default ./)\n" \ + " -e STRING HTML encode STRING\n" \ + " -d STRING URL decode STRING" #define hwclock_trivial_usage \ - "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]" + "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]" #define hwclock_full_usage \ - "Query and set the hardware clock (RTC)\n\n" \ - "Options:\n" \ - "\t-r\tread hardware clock and print result\n" \ - "\t-s\tset the system time from the hardware clock\n" \ - "\t-w\tset the hardware clock to the current system time\n" \ - "\t-u\tthe hardware clock is kept in coordinated universal time\n" \ - "\t-l\tthe hardware clock is kept in local time" - -#ifdef CONFIG_SELINUX -# define USAGE_SELINUX(a) a -#else -# define USAGE_SELINUX(a) -#endif + "Query and set the hardware clock (RTC)" \ + "\n\nOptions:\n" \ + " -r Read hardware clock and print result\n" \ + " -s Set the system time from the hardware clock\n" \ + " -w Set the hardware clock to the current system time\n" \ + " -u The hardware clock is kept in coordinated universal time\n" \ + " -l The hardware clock is kept in local time" #define id_trivial_usage \ - "[OPTIONS]... [USERNAME]" + "[OPTIONS]... [USERNAME]" #define id_full_usage \ - "Print information for USERNAME or the current user\n\n" \ - "Options:\n" \ - USAGE_SELINUX("\t-c\tprints only the security context\n") \ - "\t-g\tprints only the group ID\n" \ - "\t-u\tprints only the user ID\n" \ - "\t-n\tprint a name instead of a number\n" \ - "\t-r\tprints the real user ID instead of the effective ID" + "Print information for USERNAME or the current user" \ + "\n\nOptions:\n" \ + USE_SELINUX( \ + " -c Prints only the security context\n") \ + " -g Prints only the group ID\n" \ + " -u Prints only the user ID\n" \ + " -n Print a name instead of a number\n" \ + " -r Prints the real user ID instead of the effective ID" #define id_example_usage \ - "$ id\n" \ - "uid=1000(andersen) gid=1000(andersen)\n" - -#ifdef CONFIG_FEATURE_IFCONFIG_SLIP -# define USAGE_SIOCSKEEPALIVE(a) a -#else -# define USAGE_SIOCSKEEPALIVE(a) -#endif -#ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ -# define USAGE_IFCONFIG_MII(a) a -#else -# define USAGE_IFCONFIG_MII(a) -#endif -#ifdef CONFIG_FEATURE_IFCONFIG_HW -# define USAGE_IFCONFIG_HW(a) a -#else -# define USAGE_IFCONFIG_HW(a) -#endif -#ifdef CONFIG_FEATURE_IFCONFIG_STATUS -# define USAGE_IFCONFIG_OPT_A(a) a -#else -# define USAGE_IFCONFIG_OPT_A(a) -#endif -#ifdef CONFIG_FEATURE_IPV6 -# define USAGE_IPV6(a) a -#else -# define USAGE_IPV6(a) -#endif + "$ id\n" \ + "uid=1000(andersen) gid=1000(andersen)\n" #define ifconfig_trivial_usage \ - USAGE_IFCONFIG_OPT_A("[-a]") " [
]" + USE_FEATURE_IFCONFIG_STATUS("[-a]") " [
]" #define ifconfig_full_usage \ - "configure a network interface\n\n" \ - "Options:\n" \ - USAGE_IPV6("[add
[/]]\n") \ - USAGE_IPV6("[del
[/]]\n") \ - "\t[[-]broadcast [
]] [[-]pointopoint [
]]\n" \ - "\t[netmask
] [dstaddr
]\n" \ - USAGE_SIOCSKEEPALIVE("\t[outfill ] [keepalive ]\n") \ - "\t" USAGE_IFCONFIG_HW("[hw ether
] ") \ - "[metric ] [mtu ]\n" \ - "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \ - "\t[multicast] [[-]promisc] [txqueuelen ] [[-]dynamic]\n" \ - USAGE_IFCONFIG_MII("\t[mem_start ] [io_addr ] [irq ]\n") \ - "\t[up|down] ..." + "Configure a network interface" \ + "\n\nOptions:\n" \ + USE_FEATURE_IPV6( \ + " [add
[/]]\n") \ + USE_FEATURE_IPV6( \ + " [del
[/]]\n") \ + " [[-]broadcast [
]] [[-]pointopoint [
]]\n" \ + " [netmask
] [dstaddr
]\n" \ + USE_FEATURE_IFCONFIG_SLIP( \ + " [outfill ] [keepalive ]\n") \ + " " USE_FEATURE_IFCONFIG_HW("[hw ether
] ") "[metric ] [mtu ]\n" \ + " [[-]trailers] [[-]arp] [[-]allmulti]\n" \ + " [multicast] [[-]promisc] [txqueuelen ] [[-]dynamic]\n" \ + USE_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ( \ + " [mem_start ] [io_addr ] [irq ]\n") \ + " [up|down] ..." #define ifup_trivial_usage \ - "<-ahinv> " + "<-ahinv> " #define ifup_full_usage \ - "ifup \n\n" \ - "Options:\n" \ - "\t-h\tthis help\n" \ - "\t-a\tde/configure all interfaces automatically\n" \ - "\t-i FILE\tuse FILE for interface definitions\n" \ - "\t-n\tprint out what would happen, but don't do it\n" \ - "\t\t\t(note that this option doesn't disable mappings)\n" \ - "\t-v\tprint out what would happen before doing it\n" \ - "\t-m\tdon't run any mappings\n" \ - "\t-f\tforce de/configuration" + "Options:\n" \ + " -a De/configure all interfaces automatically\n" \ + " -i FILE Use FILE for interface definitions\n" \ + " -n Print out what would happen, but don't do it\n" \ + " (note that this option doesn't disable mappings)\n" \ + " -v Print out what would happen before doing it\n" \ + " -m Don't run any mappings\n" \ + " -f Force de/configuration" #define ifdown_trivial_usage \ - "<-ahinv> " + "<-ahinv> " #define ifdown_full_usage \ - "ifdown \n\n" \ - "Options:\n" \ - "\t-h\tthis help\n" \ - "\t-a\tde/configure all interfaces automatically\n" \ - "\t-i FILE\tuse FILE for interface definitions\n" \ - "\t-n\tprint out what would happen, but don't do it\n" \ - "\t\t(note that this option doesn't disable mappings)\n" \ - "\t-v\tprint out what would happen before doing it\n" \ - "\t-m\tdon't run any mappings\n" \ - "\t-f\tforce de/configuration" + "Options:\n" \ + " -a De/configure all interfaces automatically\n" \ + " -i FILE Use FILE for interface definitions\n" \ + " -n Print out what would happen, but don't do it\n" \ + " (note that this option doesn't disable mappings)\n" \ + " -v Print out what would happen before doing it\n" \ + " -m Don't run any mappings\n" \ + " -f Force de/configuration" #define inetd_trivial_usage \ - "[-f] [-q len] [conf]" + "[-f] [-q len] [conf]" #define inetd_full_usage \ - "Listens for network connections and launches programs\n\n" \ - "Option:\n" \ - "\t-f\tRun as a foreground progress\n" \ - "\t-q\tSets the size of the socket listen queue to\n" \ - "\t\tthe specified value. Default is 128" + "Listen for network connections and launch programs" \ + "\n\nOptions:\n" \ + " -f Run in foreground\n" \ + " -q N Set the size of the socket listen queue to N\n" \ + " (default: 128)" #define init_trivial_usage \ - "" + "" #define init_full_usage \ - "Init is the parent of all processes." + "Init is the parent of all processes" #define init_notes_usage \ "This version of init is designed to be run only by the kernel.\n" \ "\n" \ "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ -"the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \ +"the /etc/inittab file is completely ignored by BusyBox init. If you want\n" \ "runlevels, use sysvinit.\n" \ "\n" \ -"BusyBox init works just fine without an inittab. If no inittab is found, \n" \ +"BusyBox init works just fine without an inittab. If no inittab is found,\n" \ "it has the following default behavior:\n" \ "\n" \ " ::sysinit:/etc/init.d/rcS\n" \ @@ -1405,18 +1422,18 @@ " 'sysinit' is the first item run on boot. init waits until all\n" \ " sysinit actions are completed before continuing. Following the\n" \ " completion of all sysinit actions, all 'wait' actions are run.\n" \ -" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ +" 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ " the specified task completes. 'once' actions are asynchronous,\n" \ " therefore, init does not wait for them to complete. 'restart' is\n" \ " the action taken to restart the init process. By default this should\n" \ " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ " actions are run when the system detects that someone on the system\n" \ -" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ -" wants to run 'reboot' at this point to cause the system to reboot.\n" \ +" console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ +" wants to run 'reboot' at this point to cause the system to reboot.\n" \ " Finally the 'shutdown' action specifies the actions to taken when\n" \ -" init is told to reboot. Unmounting filesystems and disabling swap\n" \ -" is a very good here\n" \ +" init is told to reboot. Unmounting filesystems and disabling swap\n" \ +" is a very good here.\n" \ "\n" \ " Run repeatedly actions:\n" \ "\n" \ @@ -1439,7 +1456,7 @@ "\n" \ "Example /etc/inittab file:\n" \ "\n" \ -" # This is run first except when booting in single-user mode.\n" \ +" # This is run first except when booting in single-user mode\n" \ " #\n" \ " ::sysinit:/etc/init.d/rcS\n" \ " \n" \ @@ -1463,7 +1480,7 @@ " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ " #\n" \ -" # Example how to put a getty on a modem line.\n" \ +" # Example how to put a getty on a modem line\n" \ " #::respawn:/sbin/getty 57600 ttyS2\n" \ " \n" \ " # Stuff to do when restarting the init process\n" \ @@ -1474,585 +1491,584 @@ " ::shutdown:/bin/umount -a -r\n" \ " ::shutdown:/sbin/swapoff -a\n" -#ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP -# define USAGE_INSMOD_MAP(a) a -#else -# define USAGE_INSMOD_MAP(a) -#endif #define insmod_trivial_usage \ - "[OPTION]... MODULE [symbol=value]..." + "[OPTION]... MODULE [symbol=value]..." #define insmod_full_usage \ - "Loads the specified kernel modules into the kernel.\n\n" \ - "Options:\n" \ - "\t-f\tForce module to load into the wrong kernel version\n" \ - "\t-k\tMake module autoclean-able\n" \ - "\t-v\tverbose output\n" \ - "\t-q\tquiet output\n" \ - "\t-L\tLock to prevent simultaneous loads of a module\n" \ - USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \ - "\t-o NAME\tSet internal module name to NAME\n" \ - "\t-x\tdo not export externs" + "Load the specified kernel modules into the kernel" \ + "\n\nOptions:\n" \ + " -f Force module to load into the wrong kernel version\n" \ + " -k Make module autoclean-able\n" \ + " -v Verbose output\n" \ + " -q Quiet output\n" \ + " -L Lock to prevent simultaneous loads of a module\n" \ + USE_FEATURE_INSMOD_LOAD_MAP( \ + " -m Output load map to stdout\n") \ + " -o NAME Set internal module name to NAME\n" \ + " -x Do not export externs" #define install_trivial_usage \ - "[-cgmops] [sources] " + "[-cgmops] [sources] " #define install_full_usage \ - "Copies files and set attributes\n\n" \ - "Options:\n" \ - "\t-c\tcopy the file, default\n" \ - "\t-d\tcreate directories\n" \ - "\t-g\tset group ownership\n" \ - "\t-m\tset permission modes\n" \ - "\t-o\tset ownership\n" \ - "\t-p\tpreserve date\n" \ - "\t-s\tstrip symbol tables" + "Copy files and set attributes" \ + "\n\nOptions:\n" \ + " -c Copy the file, default\n" \ + " -d Create directories\n" \ + " -g Set group ownership\n" \ + " -m Set permission modes\n" \ + " -o Set ownership\n" \ + " -p Preserve date\n" \ + " -s Strip symbol tables" #define ip_trivial_usage \ - "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }" + "[OPTIONS] {address | link | route | tunnel | rule} {COMMAND}" #define ip_full_usage \ - "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \ - "where OBJECT := { link | addr | route | tunnel }\n" \ - "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" + "ip [OPTIONS] OBJECT {COMMAND}\n" \ + "where OBJECT := {link | addr | route | tunnel |rule}\n" \ + "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" #define ipaddr_trivial_usage \ - "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ - "\t\t[ dev STRING ] [ to PREFIX ] }" + "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ + " [ dev STRING ] [ to PREFIX ] }" #define ipaddr_full_usage \ - "ipaddr {add|delete} IFADDR dev STRING\n" \ - "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \ - "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \ - "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \ - "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \ - "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \ - "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]" - -#ifdef CONFIG_FEATURE_IPCALC_FANCY -# define XUSAGE_IPCALC_FANCY(a) a -#else -# define XUSAGE_IPCALC_FANCY(a) -#endif + "ipaddr {add|delete} IFADDR dev STRING\n" \ + "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \ + " [ to PREFIX ] [ label PATTERN ]\n" \ + " IFADDR := PREFIX | ADDR peer PREFIX\n" \ + " [ broadcast ADDR ] [ anycast ADDR ]\n" \ + " [ label STRING ] [ scope SCOPE-ID ]\n" \ + " SCOPE-ID := [ host | link | global | NUMBER ]" + #define ipcalc_trivial_usage \ - "[OPTION]...
[[/]] [NETMASK]" + "[OPTION]...
[[/]] [NETMASK]" #define ipcalc_full_usage \ - "Calculate IP network settings from a IP address\n\n" \ - "Options:\n" \ - "\t-b\t--broadcast\tDisplay calculated broadcast address\n" \ - "\t-n\t--network\tDisplay calculated network address\n" \ - "\t-m\t--netmask\tDisplay default netmask for IP" \ - XUSAGE_IPCALC_FANCY( \ - "\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK\n" \ - "\t-h\t--hostname\tDisplay first resolved host name\n" \ - "\t-s\t--silent\tDon't ever display error messages") + "Calculate IP network settings from a IP address" \ + "\n\nOptions:" \ + "\n -b --broadcast Display calculated broadcast address" \ + "\n -n --network Display calculated network address" \ + "\n -m --netmask Display default netmask for IP" \ + USE_FEATURE_IPCALC_FANCY( \ + "\n -p --prefix Display the prefix for IP/NETMASK" \ + "\n -h --hostname Display first resolved host name" \ + "\n -s --silent Don't ever display error messages") #define ipcrm_trivial_usage \ - "[-[MQS] key] [-[mqs] id]" + "[-[MQS] key] [-[mqs] id]" #define ipcrm_full_usage \ - "The upper-case options MQS are used to remove a shared memory\n" \ - "segment by an shmkey value. The lower-case options mqs are used\n" \ - "to remove a segment by shmid value.\n" \ - "\t-m | -M\tRemove the memory segment after the last detatch\n" \ - "\t-q | -Q\tRemove the message queue\n" \ - "\t-s | -S\tRemove the semaphore" + "The upper-case options MQS are used to remove a shared memory segment by a\n" \ + "segment by a shmkey value. The lower-case options mqs are used\n" \ + "to remove a segment by shmid value.\n" \ + "\n\nOptions:\n" \ + " -[mM] Remove the memory segment after the last detach\n" \ + " -[qQ] Remove the message queue\n" \ + " -[sS] Remove the semaphore" #define ipcs_trivial_usage \ - "[[-smq] -i shmid] | [[-asmq] [-tclup]]" + "[[-smq] -i shmid] | [[-asmq] [-tcplu]]" #define ipcs_full_usage \ - "\t-i\tspecify a specific resource id\n" \ - "Resource specification:\n" \ - "\t-m\tshared memory segments\n" \ - "\t-q\tmessage queues\n" \ - "\t-s\tsempahore arrays\n" \ - "\t-a\tall (default)\n" \ - "Output format:\n" \ - "\t-t\ttime\n" \ - "\t-p\tpid\n" \ - "\t-s\tcreator\n" \ - "\t-a\tlimits\n" \ - "\t-i\tsummary" + " -i Specify a specific resource id\n" \ + "Resource specification:\n" \ + " -m Shared memory segments\n" \ + " -q Message queues\n" \ + " -s Semaphore arrays\n" \ + " -a All (default)\n" \ + "Output format:\n" \ + " -t Time\n" \ + " -c Creator\n" \ + " -p Pid\n" \ + " -l Limits\n" \ + " -u Summary" #define iplink_trivial_usage \ - "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }" + "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }" #define iplink_full_usage \ - "iplink set DEVICE { up | down | arp { on | off } |\n" \ - "\t\t\tdynamic { on | off } |\n" \ - "\t\t\tmtu MTU }\n" \ - "\tiplink show [ DEVICE ]" + "iplink set DEVICE { up | down | arp { on | off } |\n" \ + " dynamic { on | off } |\n" \ + " mtu MTU }\n" \ + "iplink show [ DEVICE ]" #define iproute_trivial_usage \ - "{ list | flush | { add | del | change | append |\n" \ - "\t\treplace | monitor } ROUTE }" + "{ list | flush | { add | del | change | append |\n" \ + " replace | monitor } ROUTE }" #define iproute_full_usage \ - "iproute { list | flush } SELECTOR\n" \ - "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \ - "\t\t\t[ oif STRING ] [ tos TOS ]\n" \ - "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \ - "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \ - "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]" + "iproute { list | flush } SELECTOR\n" \ + "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \ + " [ oif STRING ] [ tos TOS ]\n" \ + "iproute { add | del | change | append | replace | monitor } ROUTE\n" \ + " SELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \ + " ROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]" + +#define iprule_trivial_usage \ + "{[ list | add | del ] RULE}" +#define iprule_full_usage \ + "iprule [ list | add | del ] SELECTOR ACTION\n" \ + " SELECTOR := [ from PREFIX ] [ to PREFIX ] [ tos TOS ] [ fwmark FWMARK ]\n" \ + " [ dev STRING ] [ pref NUMBER ]\n" \ + " ACTION := [ table TABLE_ID ] [ nat ADDRESS ]\n" \ + " [ prohibit | reject | unreachable ]\n" \ + " [ realms [SRCREALM/]DSTREALM ]\n" \ + " TABLE_ID := [ local | main | default | NUMBER ]" #define iptunnel_trivial_usage \ - "{ add | change | del | show } [ NAME ]\n" \ - "\t\t[ mode { ipip | gre | sit } ]\n" \ - "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]" + "{ add | change | del | show } [ NAME ]\n" \ + " [ mode { ipip | gre | sit } ]\n" \ + " [ remote ADDR ] [ local ADDR ] [ ttl TTL ]" #define iptunnel_full_usage \ - "iptunnel { add | change | del | show } [ NAME ]\n" \ - "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \ - "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \ - "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]" + "iptunnel { add | change | del | show } [ NAME ]\n" \ + " [ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \ + " [ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \ + " [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]" #define kill_trivial_usage \ - "[-signal] process-id [process-id ...]" + "[-l] [-signal] process-id [process-id ...]" #define kill_full_usage \ - "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \ - "Options:\n" \ - "\t-l\tList all signal names and numbers" + "Send a signal (default is TERM) to the specified process(es)" \ + "\n\nOptions:\n" \ + " -l List all signal names and numbers" #define kill_example_usage \ - "$ ps | grep apache\n" \ - "252 root root S [apache]\n" \ - "263 www-data www-data S [apache]\n" \ - "264 www-data www-data S [apache]\n" \ - "265 www-data www-data S [apache]\n" \ - "266 www-data www-data S [apache]\n" \ - "267 www-data www-data S [apache]\n" \ - "$ kill 252\n" + "$ ps | grep apache\n" \ + "252 root root S [apache]\n" \ + "263 www-data www-data S [apache]\n" \ + "264 www-data www-data S [apache]\n" \ + "265 www-data www-data S [apache]\n" \ + "266 www-data www-data S [apache]\n" \ + "267 www-data www-data S [apache]\n" \ + "$ kill 252\n" #define killall_trivial_usage \ - "[-q] [-signal] process-name [process-name ...]" + "[-l] [-q] [-signal] process-name [process-name ...]" #define killall_full_usage \ - "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \ - "Options:\n" \ - "\t-l\tList all signal names and numbers\n" \ - "\t-q\tDo not complain if no processes were killed" + "Send a signal (default is TERM) to the specified process(es)" \ + "\n\nOptions:\n" \ + " -l List all signal names and numbers\n" \ + " -q Do not complain if no processes were killed" #define killall_example_usage \ - "$ killall apache\n" + "$ killall apache\n" + +#define killall5_trivial_usage \ + "[-l] [-signal]" +#define killall5_full_usage \ + "Send a signal (default is TERM) to all processes outside current session" \ + "\n\nOptions:\n" \ + " -l List all signal names and numbers\n" \ #define klogd_trivial_usage \ - "[-c n] [-n]" + "[-c n] [-n]" #define klogd_full_usage \ - "Kernel logger.\n" \ - "Options:\n" \ - "\t-c n\tSets the default log level of console messages to n\n" \ - "\t-n\tRun as a foreground process" + "Kernel logger" \ + "\n\nOptions:\n" \ + " -c n Sets the default log level of console messages to n\n" \ + " -n Run as foreground process" #define length_trivial_usage \ - "STRING" + "STRING" #define length_full_usage \ - "Prints out the length of the specified STRING." + "Print out the length of the specified STRING" #define length_example_usage \ - "$ length Hello\n" \ - "5\n" + "$ length Hello\n" \ + "5\n" #define less_trivial_usage \ - "[-EMNmh~?] FILE1 FILE2..." + "[-EMNmh~?] FILE1 FILE2..." #define less_full_usage \ - "View a file or list of files. The position within files can be\n" \ - "changed, and files can be manipulated in various ways with the\n" \ - "following options:\n\n" \ - "\t-E\tQuit once the end of a file is reached\n" \ - "\t-M\tDisplay a status line containing the current line numbers\n" \ - "\t\tand the percentage through the file\n" \ - "\t-N\tPrefix line numbers to each line\n" \ - "\t-m\tDisplay a status line containing the percentage through the\n" \ - "\t\tfile\n" \ - "\t-~\tSuppress ~s displayed when input past the end of the file is\n" \ - "\t\treached.\n" \ - "\t-h, -?\tDisplay this help message" + "View a file or list of files. The position within files can be\n" \ + "changed, and files can be manipulated in various ways." \ + "\n\nOptions:\n" \ + " -E Quit once the end of a file is reached\n" \ + " -M Display a status line containing the current line numbers\n" \ + " and the percentage through the file\n" \ + " -N Prefix line numbers to each line\n" \ + " -m Display a status line containing the percentage through the\n" \ + " file\n" \ + " -~ Suppress ~s displayed when input past the end of the file is\n" \ + " reached" #define setarch_trivial_usage \ - " [args ...]" + " [args ...]" #define setarch_full_usage \ - "Personality may be:\n" \ - "\tlinux32\tSet 32bit uname emulation\n" \ - "\tlinux64\tSet 64bit uname emulation" + "Personality may be:\n" \ + " linux32 Set 32bit uname emulation\n" \ + " linux64 Set 64bit uname emulation" #define ln_trivial_usage \ - "[OPTION] TARGET... LINK_NAME|DIRECTORY" + "[OPTION] TARGET... LINK_NAME|DIRECTORY" #define ln_full_usage \ - "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n" \ - "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \ - "Options:\n" \ - "\t-s\tmake symbolic links instead of hard links\n" \ - "\t-f\tremove existing destination files\n" \ - "\t-n\tno dereference symlinks - treat like normal file\n" \ - "\t-b\tmake a backup of the target (if exists) before link operation\n" \ - "\t-S suffix\tuse suffix instead of ~ when making backup files" + "Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \ + "You may use '--' to indicate that all following arguments are non-options." \ + "\n\nOptions:\n" \ + " -s Make symbolic links instead of hard links\n" \ + " -f Remove existing destination files\n" \ + " -n No dereference symlinks - treat like normal file\n" \ + " -b Make a backup of the target (if exists) before link operation\n" \ + " -S suf Use suffix instead of ~ when making backup files" #define ln_example_usage \ - "$ ln -s BusyBox /tmp/ls\n" \ - "$ ls -l /tmp/ls\n" \ - "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" + "$ ln -s BusyBox /tmp/ls\n" \ + "$ ls -l /tmp/ls\n" \ + "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" #define loadfont_trivial_usage \ - "< font" + "< font" #define loadfont_full_usage \ - "Loads a console font from standard input." + "Load a console font from standard input" #define loadfont_example_usage \ - "$ loadfont < /etc/i18n/fontname\n" + "$ loadfont < /etc/i18n/fontname\n" #define loadkmap_trivial_usage \ - "< keymap" + "< keymap" #define loadkmap_full_usage \ - "Loads a binary keyboard translation table from standard input." + "Load a binary keyboard translation table from standard input" #define loadkmap_example_usage \ - "$ loadkmap < /etc/i18n/lang-keymap\n" + "$ loadkmap < /etc/i18n/lang-keymap\n" #define logger_trivial_usage \ - "[OPTION]... [MESSAGE]" + "[OPTION]... [MESSAGE]" #define logger_full_usage \ - "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \ - "Options:\n" \ - "\t-s\tLog to stderr as well as the system log\n" \ - "\t-t TAG\tLog using the specified tag (defaults to user name)\n" \ - "\t-p PRIORITY\tEnter the message with the specified priority\n" \ - "\t\tThis may be numerical or a ``facility.level'' pair" + "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \ + "\n\nOptions:\n" \ + " -s Log to stderr as well as the system log\n" \ + " -t TAG Log using the specified tag (defaults to user name)\n" \ + " -p PRIO Enter the message with the specified priority.\n" \ + " This may be numerical or a 'facility.level' pair." #define logger_example_usage \ - "$ logger \"hello\"\n" + "$ logger \"hello\"\n" #define login_trivial_usage \ - "[OPTION]... [username] [ENV=VAR ...]" + "[OPTION]... [username] [ENV=VAR ...]" #define login_full_usage \ - "Begin a new session on the system\n\n" \ - "Options:\n" \ - "\t-f\tDo not authenticate (user already authenticated)\n" \ - "\t-h\tName of the remote host for this login\n" \ - "\t-p\tPreserve environment" + "Begin a new session on the system" \ + "\n\nOptions:\n" \ + " -f Do not authenticate (user already authenticated)\n" \ + " -h Name of the remote host for this login\n" \ + " -p Preserve environment" #define logname_trivial_usage \ - "" + "" #define logname_full_usage \ - "Print the name of the current user." + "Print the name of the current user" #define logname_example_usage \ - "$ logname\n" \ - "root\n" + "$ logname\n" \ + "root\n" #define logread_trivial_usage \ - "[OPTION]..." + "[OPTION]..." #define logread_full_usage \ - "Shows the messages from syslogd (using circular buffer).\n\n" \ - "Options:\n" \ - "\t-f\t\toutput data as the log grows" + "Show the messages from syslogd (using circular buffer)" \ + "\n\nOptions:\n" \ + " -f Output data as the log grows" #define losetup_trivial_usage \ - "[-od] LOOPDEVICE [FILE]" + "[-o OFFSET] [-d] LOOPDEVICE [FILE]]" #define losetup_full_usage \ - "Associate LOOPDEVICE with FILE, or display current association.\n\n" \ - "Options:\n" \ - "\t-d\t\tDisassociate LOOPDEVICE\n" \ - "\t-o OFFSET\tStart OFFSET bytes into FILE" + "(Dis)associate LOOPDEVICE with FILE, or display current associations" \ + "\n\nOptions:\n" \ + " -d Disassociate LOOPDEVICE\n" \ + " -o OFFSET Start OFFSET bytes into FILE" #define losetup_notes_usage \ - "One argument (losetup /dev/loop1) will display the current association\n" \ - "(if any), or disassociate it (with -d). The display shows the offset\n" \ - "and filename of the file the loop device is currently bound to.\n\n" \ - "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ - "with an optional offset (-o 12345). Encryption is not yet supported.\n\n" - -#ifdef CONFIG_FEATURE_LS_TIMESTAMPS -# define USAGE_LS_TIMESTAMPS(a) a -#else -# define USAGE_LS_TIMESTAMPS(a) -#endif -#ifdef CONFIG_FEATURE_LS_FILETYPES -# define USAGE_LS_FILETYPES(a) a -#else -# define USAGE_LS_FILETYPES(a) -#endif -#ifdef CONFIG_FEATURE_LS_FOLLOWLINKS -# define USAGE_LS_FOLLOWLINKS(a) a -#else -# define USAGE_LS_FOLLOWLINKS(a) -#endif -#ifdef CONFIG_FEATURE_LS_RECURSIVE -# define USAGE_LS_RECURSIVE(a) a -#else -# define USAGE_LS_RECURSIVE(a) -#endif -#ifdef CONFIG_FEATURE_LS_SORTFILES -# define USAGE_LS_SORTFILES(a) a -#else -# define USAGE_LS_SORTFILES(a) -#endif -#ifdef CONFIG_FEATURE_AUTOWIDTH -# define USAGE_AUTOWIDTH(a) a -#else -# define USAGE_AUTOWIDTH(a) -#endif -#ifdef CONFIG_FEATURE_LS_COLOR - #define USAGE_LS_COLOR(a) a -#else - #define USAGE_LS_COLOR(a) -#endif + "No arguments will display all current associations.\n" \ + "One argument (losetup /dev/loop1) will display the current association\n" \ + "(if any), or disassociate it (with -d). The display shows the offset\n" \ + "and filename of the file the loop device is currently bound to.\n\n" \ + "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ + "with an optional offset (-o 12345). Encryption is not yet supported.\n\n" #define ls_trivial_usage \ - "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USAGE_HUMAN_READABLE("h") USAGE_NOT_HUMAN_READABLE("") "k" USAGE_SELINUX("K") "] [filenames...]" + "[-1Aa" USE_FEATURE_LS_TIMESTAMPS("c") "Cd" \ + USE_FEATURE_LS_TIMESTAMPS("e") USE_FEATURE_LS_FILETYPES("F") "iln" \ + USE_FEATURE_LS_FILETYPES("p") USE_FEATURE_LS_FOLLOWLINKS("L") \ + USE_FEATURE_LS_RECURSIVE("R") USE_FEATURE_LS_SORTFILES("rS") "s" \ + USE_FEATURE_AUTOWIDTH("T") USE_FEATURE_LS_TIMESTAMPS("tu") \ + USE_FEATURE_LS_SORTFILES("v") USE_FEATURE_AUTOWIDTH("w") "x" \ + USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \ + USE_SELINUX("K") "] [filenames...]" #define ls_full_usage \ - "List directory contents\n\n" \ - "Options:\n" \ - "\t-1\tlist files in a single column\n" \ - "\t-A\tdo not list implied . and ..\n" \ - "\t-a\tdo not hide entries starting with .\n" \ - "\t-C\tlist entries by columns\n" \ - USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \ - USAGE_LS_COLOR("\t--color[={always,never,auto}]\tto control coloring\n") \ - "\t-d\tlist directory entries instead of contents\n" \ - USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \ - USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \ - "\t-i\tlist the i-node for each file\n" \ - "\t-l\tuse a long listing format\n" \ - "\t-n\tlist numeric UIDs and GIDs instead of names\n" \ - USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \ - USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \ - USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \ - USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \ - USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \ - "\t-s\tlist the size of each file, in blocks\n" \ - USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \ - USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \ - USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \ - USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \ - USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \ - "\t-x\tlist entries by lines instead of by columns\n" \ - USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \ - USAGE_HUMAN_READABLE( \ - "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \ - USAGE_SELINUX("\t-k\tprint security context\n") \ - USAGE_SELINUX("\t-K\tprint security context in long format\n") + "List directory contents" \ + "\n\nOptions:" \ + "\n -1 List files in a single column" \ + "\n -A Do not list implied . and .." \ + "\n -a Do not hide entries starting with ." \ + "\n -C List entries by columns" \ + USE_FEATURE_LS_TIMESTAMPS( \ + "\n -c With -l: show ctime") \ + USE_FEATURE_LS_COLOR( \ + "\n --color[={always,never,auto}] Control coloring") \ + "\n -d List directory entries instead of contents" \ + USE_FEATURE_LS_TIMESTAMPS( \ + "\n -e List both full date and full time") \ + USE_FEATURE_LS_FILETYPES( \ + "\n -F Append indicator (one of */=@|) to entries") \ + "\n -i List the i-node for each file" \ + "\n -l Use a long listing format" \ + "\n -n List numeric UIDs and GIDs instead of names" \ + USE_FEATURE_LS_FILETYPES( \ + "\n -p Append indicator (one of /=@|) to entries") \ + USE_FEATURE_LS_FOLLOWLINKS( \ + "\n -L List entries pointed to by symbolic links") \ + USE_FEATURE_LS_RECURSIVE( \ + "\n -R List subdirectories recursively") \ + USE_FEATURE_LS_SORTFILES( \ + "\n -r Sort the listing in reverse order") \ + USE_FEATURE_LS_SORTFILES( \ + "\n -S Sort the listing by file size") \ + "\n -s List the size of each file, in blocks" \ + USE_FEATURE_AUTOWIDTH( \ + "\n -T NUM Assume Tabstop every NUM columns") \ + USE_FEATURE_LS_TIMESTAMPS( \ + "\n -t With -l: show modification time") \ + USE_FEATURE_LS_TIMESTAMPS( \ + "\n -u With -l: show access time") \ + USE_FEATURE_LS_SORTFILES( \ + "\n -v Sort the listing by version") \ + USE_FEATURE_AUTOWIDTH( \ + "\n -w NUM Assume the terminal is NUM columns wide") \ + "\n -x List entries by lines instead of by columns" \ + USE_FEATURE_LS_SORTFILES( \ + "\n -X Sort the listing by extension") \ + USE_FEATURE_HUMAN_READABLE( \ + "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \ + USE_SELINUX( \ + "\n -k Print security context") \ + USE_SELINUX( \ + "\n -K Print security context in long format") #define lsattr_trivial_usage \ - "[-Radlv] [files...]" + "[-Radlv] [files...]" #define lsattr_full_usage \ - "list file attributes on an ext2 fs\n\n" \ - "Options:\n" \ - "\t-R\trecursively list subdirectories\n" \ - "\t-a\tdo not hide entries starting with .\n" \ - "\t-d\tlist directory entries instead of contents\n" \ - "\t-l\tprint long flag names\n" \ - "\t-v\tlist the file's version/generation number" + "List file attributes on an ext2 fs" \ + "\n\nOptions:\n" \ + " -R Recursively list subdirectories\n" \ + " -a Do not hide entries starting with .\n" \ + " -d List directory entries instead of contents\n" \ + " -l Print long flag names\n" \ + " -v List the file's version/generation number" #define lsmod_trivial_usage \ - "" + "" #define lsmod_full_usage \ - "List the currently loaded kernel modules." + "List the currently loaded kernel modules" #ifdef CONFIG_FEATURE_MAKEDEVS_LEAF #define makedevs_trivial_usage \ - "NAME TYPE MAJOR MINOR FIRST LAST [s]" + "NAME TYPE MAJOR MINOR FIRST LAST [s]" #define makedevs_full_usage \ - "Creates a range of block or character special files\n\n" \ - "TYPEs include:\n" \ - "\tb:\tMake a block (buffered) device.\n" \ - "\tc or u:\tMake a character (un-buffered) device.\n" \ - "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \ - "FIRST specifies the number appended to NAME to create the first device.\n" \ - "LAST specifies the number of the last item that should be created\n" \ - "If 's' is the last argument, the base device is created as well.\n\n" \ - "For example:\n" \ - "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ - "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" + "Create a range of block or character special files\n\n" \ + "TYPEs include:\n" \ + " b: Make a block (buffered) device\n" \ + " c or u: Make a character (un-buffered) device\n" \ + " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes\n" \ + "\n" \ + "FIRST specifies the number appended to NAME to create the first device.\n" \ + "LAST specifies the number of the last item that should be created\n" \ + "If 's' is the last argument, the base device is created as well.\n\n" \ + "For example:\n" \ + " makedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ + " makedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" #define makedevs_example_usage \ - "# makedevs /dev/ttyS c 4 66 2 63\n" \ - "[creates ttyS2-ttyS63]\n" \ - "# makedevs /dev/hda b 3 0 0 8 s\n" \ - "[creates hda,hda1-hda8]\n" + "# makedevs /dev/ttyS c 4 66 2 63\n" \ + "[creates ttyS2-ttyS63]\n" \ + "# makedevs /dev/hda b 3 0 0 8 s\n" \ + "[creates hda,hda1-hda8]\n" #endif #ifdef CONFIG_FEATURE_MAKEDEVS_TABLE #define makedevs_trivial_usage \ - "[-d device_table] rootdir" + "[-d device_table] rootdir" #define makedevs_full_usage \ - "Creates a range of special files as specified in a device table.\n" \ - "Device table entries take the form of:\n" \ - " \n" \ - "Where name is the file name, type can be one of:\n" \ - " f A regular file\n" \ - " d Directory\n" \ - " c Character special device file\n" \ - " b Block special device file\n" \ - " p Fifo (named pipe)\n" \ - "uid is the user id for the target file, gid is the group id for the\n" \ - "target file. The rest of the entries (major, minor, etc) apply to\n" \ - "to device special files. A '-' may be used for blank entries." + "Create a range of special files as specified in a device table.\n" \ + "Device table entries take the form of:\n" \ + " \n" \ + "Where name is the file name, type can be one of:\n" \ + " f A regular file\n" \ + " d Directory\n" \ + " c Character special device file\n" \ + " b Block special device file\n" \ + " p Fifo (named pipe)\n" \ + "uid is the user id for the target file, gid is the group id for the\n" \ + "target file. The rest of the entries (major, minor, etc) apply to\n" \ + "to device special files. A '-' may be used for blank entries." #define makedevs_example_usage \ - "For example:\n" \ - " \n" \ - "/dev d 755 0 0 - - - - -\n" \ - "/dev/console c 666 0 0 5 1 - - -\n" \ - "/dev/null c 666 0 0 1 3 0 0 -\n" \ - "/dev/zero c 666 0 0 1 5 0 0 -\n" \ - "/dev/hda b 640 0 0 3 0 0 0 -\n" \ - "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ - "Will Produce:\n" \ - "/dev\n" \ - "/dev/console\n" \ - "/dev/null\n" \ - "/dev/zero\n" \ - "/dev/hda\n" \ - "/dev/hda[0-15]\n" -#endif - -#ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK -#define USAGE_MD5_SHA1_SUM_CHECK(a) a -#else -#define USAGE_MD5_SHA1_SUM_CHECK(a) + "For example:\n" \ + " \n" \ + "/dev d 755 0 0 - - - - -\n" \ + "/dev/console c 666 0 0 5 1 - - -\n" \ + "/dev/null c 666 0 0 1 3 0 0 -\n" \ + "/dev/zero c 666 0 0 1 5 0 0 -\n" \ + "/dev/hda b 640 0 0 3 0 0 0 -\n" \ + "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ + "Will Produce:\n" \ + "/dev\n" \ + "/dev/console\n" \ + "/dev/null\n" \ + "/dev/zero\n" \ + "/dev/hda\n" \ + "/dev/hda[0-15]\n" #endif #define md5sum_trivial_usage \ - "[OPTION] [FILEs...]" \ - USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") + "[OPTION] [FILEs...]" \ + USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") #define md5sum_full_usage \ - "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \ - "Options:\n" \ - "With no FILE, or when FILE is -, read standard input." \ - USAGE_MD5_SHA1_SUM_CHECK("\n\n" \ - "\t-c\tcheck MD5 sums against given list\n" \ - "\nThe following two options are useful only when verifying checksums:\n" \ - "\t-s\tdon't output anything, status code shows success\n" \ - "\t-w\twarn about improperly formated MD5 checksum lines") + "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \ + "\n\nOptions:\n" \ + "With no FILE, or when FILE is -, read standard input." \ + USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \ + " -c Check MD5 sums against given list\n" \ + "\nThe following two options are useful only when verifying checksums:\n" \ + " -s Don't output anything, status code shows success\n" \ + " -w Warn about improperly formatted MD5 checksum lines") #define md5sum_example_usage \ - "$ md5sum < busybox\n" \ - "6fd11e98b98a58f64ff3398d7b324003\n" \ - "$ md5sum busybox\n" \ - "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ - "$ md5sum -c -\n" \ - "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ - "busybox: OK\n" \ - "^D\n" + "$ md5sum < busybox\n" \ + "6fd11e98b98a58f64ff3398d7b324003\n" \ + "$ md5sum busybox\n" \ + "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ + "$ md5sum -c -\n" \ + "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ + "busybox: OK\n" \ + "^D\n" #define mdev_trivial_usage \ - "[-s]" + "[-s]" #define mdev_full_usage \ - "\t-s\tScan /sys and populate /dev during system boot\n\n" \ - "Called with no options (via hotplug) it uses environment variables\n" \ - "to determine which device to add/remove." -#ifdef CONFIG_FEATURE_MDEV_CONFIG -#define mdev_notes_usage \ - "The mdev config file contains lines that look like:\n" \ - " hd[a-z][0-9]* 0:3 660\n\n" \ - "That's device name (with regex match), uid:gid, and permissions.\n\n" \ - "Optionally, that can be followed (on the same line) by an asterisk\n" \ - "and a command line to run after creating the corresponding device(s),\n"\ - "ala:\n\n" \ - " hdc root:cdrom 660 *ln -s hdc cdrom\n\n" \ - "Config file parsing stops on the first matching line. If no config\n"\ - "entry is matched, devices are created with default 0:0 660. (Make\n"\ - "the last line match .* to override this.)\n\n" -#endif + " -s Scan /sys and populate /dev during system boot\n\n" \ + "Called with no options (via hotplug) it uses environment variables\n" \ + "to determine which device to add/remove." +#define mdev_notes_usage "" \ + USE_FEATURE_MDEV_CONFIG( \ + "The mdev config file contains lines that look like:\n" \ + " hd[a-z][0-9]* 0:3 660\n\n" \ + "That's device name (with regex match), uid:gid, and permissions.\n\n" \ + USE_FEATURE_MDEV_EXEC( \ + "Optionally, that can be followed (on the same line) by a special character\n" \ + "and a command line to run after creating/before deleting the corresponding\n" \ + "device(s). The environment variable $MDEV indicates the active device node\n" \ + "(which is useful if it's a regex match). For example:\n\n" \ + " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \ + "The special characters are @ (run after creating), $ (run before deleting),\n" \ + "and * (run both after creating and before deleting). The commands run in\n" \ + "the /dev directory, and use system() which calls /bin/sh.\n\n" \ + ) \ + "Config file parsing stops on the first matching line. If no config\n"\ + "entry is matched, devices are created with default 0:0 660. (Make\n"\ + "the last line match .* to override this.)\n\n" \ + ) #define mesg_trivial_usage \ - "[y|n]" + "[y|n]" #define mesg_full_usage \ - "mesg controls write access to your terminal\n" \ - "\ty\tAllow write access to your terminal\n" \ - "\tn\tDisallow write access to your terminal" + "Control write access to your terminal\n" \ + " y Allow write access to your terminal\n" \ + " n Disallow write access to your terminal" #define mkdir_trivial_usage \ - "[OPTION] DIRECTORY..." + "[OPTION] DIRECTORY..." #define mkdir_full_usage \ - "Create the DIRECTORY(ies) if they do not already exist\n\n" \ - "Options:\n" \ - "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \ - "\t-p\tno error if existing, make parent directories as needed" + "Create the DIRECTORY(ies) if they do not already exist" \ + "\n\nOptions:\n" \ + " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \ + " -p No error if existing, make parent directories as needed" #define mkdir_example_usage \ - "$ mkdir /tmp/foo\n" \ - "$ mkdir /tmp/foo\n" \ - "/tmp/foo: File exists\n" \ - "$ mkdir /tmp/foo/bar/baz\n" \ - "/tmp/foo/bar/baz: No such file or directory\n" \ - "$ mkdir -p /tmp/foo/bar/baz\n" + "$ mkdir /tmp/foo\n" \ + "$ mkdir /tmp/foo\n" \ + "/tmp/foo: File exists\n" \ + "$ mkdir /tmp/foo/bar/baz\n" \ + "/tmp/foo/bar/baz: No such file or directory\n" \ + "$ mkdir -p /tmp/foo/bar/baz\n" #define mke2fs_trivial_usage \ - "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \ - "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \ - "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \ - "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \ - "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ - "device [blocks-count]" + "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \ + "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \ + "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \ + "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \ + "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ + "device [blocks-count]" #define mke2fs_full_usage \ - "\t-b size\tblock size in bytes\n" \ - "\t-c\tcheck for bad blocks before creating\n" \ - "\t-E opts\tset extended options\n" \ - "\t-f size\tfragment size in bytes\n" \ - "\t-F\tforce (ignore sanity checks)\n" \ - "\t-g num\tnumber of blocks in a block group\n" \ - "\t-i ratio\tthe bytes/inode ratio\n" \ - "\t-j\tcreate a journal (ext3)\n" \ - "\t-J opts\tset journal options (size/device)\n" \ - "\t-l file\tread bad blocks list from file\n" \ - "\t-L lbl\tset the volume label\n" \ - "\t-m percent\tpercent of fs blocks to reserve for admin\n" \ - "\t-M dir\tset last mounted directory\n" \ - "\t-n\tdo not actually create anything\n" \ - "\t-N num\tnumber of inodes to create\n" \ - "\t-o os\tset the 'creator os' field\n" \ - "\t-O features\tdir_index/filetype/has_journal/journal_dev/sparse_super\n" \ - "\t-q\tquiet execution\n" \ - "\t-r rev\tset filesystem revision\n" \ - "\t-S\twrite superblock and group descriptors only\n" \ - "\t-T fs-type\tset usage type (news/largefile/largefile4)\n" \ - "\t-v\tverbose execution" + " -b size Block size in bytes\n" \ + " -c Check for bad blocks before creating\n" \ + " -E opts Set extended options\n" \ + " -f size Fragment size in bytes\n" \ + " -F Force (ignore sanity checks)\n" \ + " -g num Number of blocks in a block group\n" \ + " -i ratio The bytes/inode ratio\n" \ + " -j Create a journal (ext3)\n" \ + " -J opts Set journal options (size/device)\n" \ + " -l file Read bad blocks list from file\n" \ + " -L lbl Set the volume label\n" \ + " -m percent Percent of fs blocks to reserve for admin\n" \ + " -M dir Set last mounted directory\n" \ + " -n Do not actually create anything\n" \ + " -N num Number of inodes to create\n" \ + " -o os Set the 'creator os' field\n" \ + " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \ + " -q Quiet execution\n" \ + " -r rev Set filesystem revision\n" \ + " -S Write superblock and group descriptors only\n" \ + " -T fs-type Set usage type (news/largefile/largefile4)\n" \ + " -v Verbose execution" #define mkfifo_trivial_usage \ - "[OPTIONS] name" + "[OPTIONS] name" #define mkfifo_full_usage \ - "Creates a named pipe (identical to 'mknod name p')\n\n" \ - "Options:\n" \ - "\t-m\tcreate the pipe using the specified mode (default a=rw)" + "Create a named pipe (identical to 'mknod name p')" \ + "\n\nOptions:\n" \ + " -m Create the pipe using the specified mode (default a=rw)" #define mkfs_minix_trivial_usage \ - "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" + "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" #define mkfs_minix_full_usage \ - "Make a MINIX filesystem.\n\n" \ - "Options:\n" \ - "\t-c\t\tCheck the device for bad blocks\n" \ - "\t-n [14|30]\tSpecify the maximum length of filenames\n" \ - "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \ - "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \ - "\t-v\t\tMake a Minix version 2 filesystem" + "Make a MINIX filesystem" \ + "\n\nOptions:\n" \ + " -c Check the device for bad blocks\n" \ + " -n [14|30] Specify the maximum length of filenames\n" \ + " -i INODES Specify the number of inodes for the filesystem\n" \ + " -l FILENAME Read the bad blocks list from FILENAME\n" \ + " -v Make a Minix version 2 filesystem" #define mknod_trivial_usage \ - "[OPTIONS] NAME TYPE MAJOR MINOR" + "[OPTIONS] NAME TYPE MAJOR MINOR" #define mknod_full_usage \ - "Create a special file (block, character, or pipe).\n\n" \ - "Options:\n" \ - "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \ - "TYPEs include:\n" \ - "\tb:\tMake a block (buffered) device\n" \ - "\tc or u:\tMake a character (un-buffered) device\n" \ - "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes" + "Create a special file (block, character, or pipe)" \ + "\n\nOptions:\n" \ + " -m Create the special file using the specified mode (default a=rw)" \ + "\n\nTYPEs include:\n" \ + " b: Make a block (buffered) device\n" \ + " c or u: Make a character (un-buffered) device\n" \ + " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" #define mknod_example_usage \ - "$ mknod /dev/fd0 b 2 0\n" \ - "$ mknod -m 644 /tmp/pipe p\n" + "$ mknod /dev/fd0 b 2 0\n" \ + "$ mknod -m 644 /tmp/pipe p\n" #define mkswap_trivial_usage \ - "[-c] [-v0|-v1] device [block-count]" + "[-c] [-v0|-v1] device [block-count]" #define mkswap_full_usage \ - "Prepare a disk partition to be used as a swap partition.\n\n" \ - "Options:\n" \ - "\t-c\t\tCheck for read-ability\n" \ - "\t-v0\t\tMake version 0 swap [max 128 Megs]\n" \ - "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117)\n" \ - "\tblock-count\tNumber of block to use (default is entire partition)" + "Prepare a disk partition to be used as swap partition" \ + "\n\nOptions:\n" \ + " -c Check for read-ability\n" \ + " -v0 Make version 0 swap [max 128 Megs]\n" \ + " -v1 Make version 1 swap [big!] (default for kernels > 2.1.117)\n" \ + " block-count Number of block to use (default is entire partition)" #define mktemp_trivial_usage \ - "[-dq] TEMPLATE" + "[-dq] TEMPLATE" #define mktemp_full_usage \ - "Creates a temporary file with its name based on TEMPLATE.\n" \ - "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \ - "Options:\n" \ - "\t-d\t\tMake a directory instead of a file\n" \ - "\t-q\t\tFail silently if an error occurs" + "Create a temporary file with its name based on TEMPLATE.\n" \ + "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \ + "\n\nOptions:\n" \ + " -d Make a directory instead of a file\n" \ + " -q Fail silently if an error occurs" #define mktemp_example_usage \ - "$ mktemp /tmp/temp.XXXXXX\n" \ - "/tmp/temp.mWiLjM\n" \ - "$ ls -la /tmp/temp.mWiLjM\n" \ - "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" + "$ mktemp /tmp/temp.XXXXXX\n" \ + "/tmp/temp.mWiLjM\n" \ + "$ ls -la /tmp/temp.mWiLjM\n" \ + "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" #define modprobe_trivial_usage \ - "[-knqrsv] MODULE [symbol=value ...]" + "[-knqrsv] MODULE [symbol=value ...]" #define modprobe_full_usage \ - "Options:\n" \ - "\t-k\tMake module autoclean-able\n" \ - "\t-n\tJust show what would be done\n" \ - "\t-q\tQuiet output\n" \ - "\t-r\tRemove module (stacks) or do autoclean\n" \ - "\t-s\tReport via syslog instead of stderr\n" \ - "\t-v\tVerbose output" + "Options:\n" \ + " -k Make module autoclean-able\n" \ + " -n Just show what would be done\n" \ + " -q Quiet output\n" \ + " -r Remove module (stacks) or do autoclean\n" \ + " -s Report via syslog instead of stderr\n" \ + " -v Verbose output" #define modprobe_notes_usage \ "modprobe can (un)load a stack of modules, passing each module options (when\n" \ "loading). modprobe uses a configuration file to determine what option(s) to\n" \ @@ -2072,7 +2088,7 @@ "\n" \ " alias \n" \ " Makes it possible to modprobe alias_name, when there is no such module.\n" \ -" It makes sense if your mod_name is long, or you want a more reprenstative\n" \ +" It makes sense if your mod_name is long, or you want a more representative\n" \ " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ " This makes it also possible to use a different set of options (below) for\n" \ " the module and the alias.\n" \ @@ -2096,1473 +2112,1475 @@ "the options from the config file. That way, you can have defaults in the config\n" \ "file, and override them for a specific usage from the command line.\n" #define modprobe_example_usage \ - "(with the above /etc/modules.conf):\n\n" \ - "$ modprobe tulip\n" \ - " will load the module 'tulip' with default option 'irq=3'\n\n" \ - "$ modprobe tulip irq=5\n" \ - " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ - "$ modprobe tulip2\n" \ - " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ - " which are the default for alias 'tulip2'\n\n" \ - "$ modprobe tulip2 irq=8\n" \ - " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ - " which are the default for alias 'tulip2' overriden by the option 'irq=8'\n\n" \ - " from the command line\n\n" \ - "$ modprobe tulip2 irq=2 io=0x210\n" \ - " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ - " which are the default for alias 'tulip2' overriden by the options 'irq=2 io=0x210'\n\n" \ - " from the command line\n" + "(with the above /etc/modules.conf):\n\n" \ + "$ modprobe tulip\n" \ + " will load the module 'tulip' with default option 'irq=3'\n\n" \ + "$ modprobe tulip irq=5\n" \ + " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ + "$ modprobe tulip2\n" \ + " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ + " which are the default for alias 'tulip2'\n\n" \ + "$ modprobe tulip2 irq=8\n" \ + " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ + " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ + " from the command line\n\n" \ + "$ modprobe tulip2 irq=2 io=0x210\n" \ + " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ + " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ + " from the command line\n" #define more_trivial_usage \ - "[FILE ...]" + "[FILE ...]" #define more_full_usage \ - "More is a filter for viewing FILE one screenful at a time." + "View FILE or standard input one screenful at a time" #define more_example_usage \ - "$ dmesg | more\n" + "$ dmesg | more\n" -#ifdef CONFIG_FEATURE_MOUNT_LOOP -# define USAGE_MOUNT_LOOP(a) a -#else -# define USAGE_MOUNT_LOOP(a) -#endif -#ifdef CONFIG_FEATURE_MTAB_SUPPORT -# define USAGE_MTAB(a) a -#else -# define USAGE_MTAB(a) -#endif #define mount_trivial_usage \ - "[flags] DEVICE NODE [-o options,more-options]" + "[flags] DEVICE NODE [-o options,more-options]" #define mount_full_usage \ - "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n\n" \ - "Flags:\n" \ - "\t-a:\t\tMount all filesystems in fstab\n" \ - USAGE_MTAB( \ - "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it\n" \ - "\t-n:\t\tDon't write a mount table entry\n" \ + "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \ + "\n\nOptions:\n" \ + " -a Mount all filesystems in fstab\n" \ + USE_FEATURE_MTAB_SUPPORT( \ + " -f \"Fake\" Add entry to mount table but don't mount it\n" \ + " -n Don't write a mount table entry\n" \ ) \ - "\t-o option:\tOne of many filesystem options, listed below\n" \ - "\t-r:\t\tMount the filesystem read-only\n" \ - "\t-t fs-type:\tSpecify the filesystem type\n" \ - "\t-w:\t\tMount for reading and writing (default)\n" \ - "\n" \ - "Options for use with the \"-o\" flag:\n" \ - "\tasync/sync:\tWrites are asynchronous / synchronous\n" \ - "\tatime/noatime:\tEnable / disable updates to inode access times\n" \ - "\tdev/nodev:\tAllow use of special device files / disallow them\n" \ - "\texec/noexec:\tAllow use of executable files / disallow them\n" \ - USAGE_MOUNT_LOOP( \ - "\tloop:\t\t Ignored (loop devices are autodetected)\n" \ + " -o option One of many filesystem options, listed below\n" \ + " -r Mount the filesystem read-only\n" \ + " -t fs-type Specify the filesystem type\n" \ + " -w Mount for reading and writing (default)\n" \ + "\n" \ + "Options for use with the \"-o\" flag:\n" \ + USE_FEATURE_MOUNT_LOOP( \ + " loop Ignored (loop devices are autodetected)\n" \ ) \ - "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them\n" \ - "\tremount:\tRe-mount a mounted filesystem, changing its flags\n" \ - "\tro/rw:\t\tMount for read-only / read-write\n" \ - "\tbind:\t\tBind a directory to an additional location\n" \ - "\tmove:\t\tRelocate an existing mount point.\n" \ - "\nThere are EVEN MORE flags that are specific to each filesystem\n" \ - "You'll have to see the written documentation for those filesystems" + USE_FEATURE_MOUNT_FLAGS( \ + " [a]sync Writes are asynchronous / synchronous\n" \ + " [no]atime Disable / enable updates to inode access times\n" \ + " [no]diratime Disable / enable atime updates to directories\n" \ + " [no]dev Allow use of special device files / disallow them\n" \ + " [no]exec Allow use of executable files / disallow them\n" \ + " [no]suid Allow set-user-id-root programs / disallow them\n" \ + " [r]shared Convert [recursively] to a shared subtree\n" \ + " [r]slave Convert [recursively] to a slave subtree\n" \ + " [r]private Convert [recursively] to a private subtree\n" \ + " [un]bindable Make mount point [un]able to be bind mounted\n" \ + " bind Bind a directory to an additional location\n" \ + " move Relocate an existing mount point\n" \ + ) \ + " remount Remount a mounted filesystem, changing its flags\n" \ + " ro/rw Mount for read-only / read-write\n" \ + "\n" \ + "There are EVEN MORE flags that are specific to each filesystem\n" \ + "You'll have to see the written documentation for those filesystems" #define mount_example_usage \ - "$ mount\n" \ - "/dev/hda3 on / type minix (rw)\n" \ - "proc on /proc type proc (rw)\n" \ - "devpts on /dev/pts type devpts (rw)\n" \ - "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ - "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ - "$ mount cd_image.iso mydir\n" + "$ mount\n" \ + "/dev/hda3 on / type minix (rw)\n" \ + "proc on /proc type proc (rw)\n" \ + "devpts on /dev/pts type devpts (rw)\n" \ + "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ + "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ + "$ mount cd_image.iso mydir\n" +#define mount_notes_usage \ + "Returns 0 for success, number of failed mounts for -a, or errno for one mount." #define mountpoint_trivial_usage \ - "[-q] <[-d] DIR | -x DEVICE>" + "[-q] <[-d] DIR | -x DEVICE>" #define mountpoint_full_usage \ - "mountpoint checks if the directory is a mountpoint\n\n" \ - "Options:\n" \ - "\t-q:\t\tBe more quiet\n" \ - "\t-d:\t\tPrint major/minor device number of the filesystem\n" \ - "\t-x:\t\tPrint major/minor device number of the blockdevice" + "mountpoint checks if the directory is a mountpoint" \ + "\n\nOptions:\n" \ + " -q Be more quiet\n" \ + " -d Print major/minor device number of the filesystem\n" \ + " -x Print major/minor device number of the blockdevice" #define mountpoint_example_usage \ - "$ mountpoint /proc\n" \ - "/proc is not a mountpoint\n" \ - "$ mountpoint /sys\n" \ - "/sys is a mountpoint\n" + "$ mountpoint /proc\n" \ + "/proc is not a mountpoint\n" \ + "$ mountpoint /sys\n" \ + "/sys is a mountpoint\n" #define mt_trivial_usage \ - "[-f device] opcode value" + "[-f device] opcode value" #define mt_full_usage \ - "Control magnetic tape drive operation\n" \ - "\nAvailable Opcodes:\n\n" \ - "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ - "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ - "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ - "setpart tell unload unlock weof wset" + "Control magnetic tape drive operation\n" \ + "\nAvailable Opcodes:\n\n" \ + "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ + "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ + "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ + "setpart tell unload unlock weof wset" #define mv_trivial_usage \ - "[OPTION]... SOURCE DEST\n" \ - "or: mv [OPTION]... SOURCE... DIRECTORY" + "[OPTION]... SOURCE DEST\n" \ + "or: mv [OPTION]... SOURCE... DIRECTORY" #define mv_full_usage \ - "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \ - "Options:\n" \ - "\t-f\tdon't prompt before overwriting\n" \ - "\t-i\tinteractive, prompt before overwrite" + "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \ + "\n\nOptions:\n" \ + " -f Don't prompt before overwriting\n" \ + " -i Interactive, prompt before overwrite" #define mv_example_usage \ - "$ mv /tmp/foo /bin/bar\n" + "$ mv /tmp/foo /bin/bar\n" #define nameif_trivial_usage \ - "[-s] [-c FILE] [{IFNAME MACADDR}]" + "[-s] [-c FILE] [{IFNAME MACADDR}]" #define nameif_full_usage \ - "Nameif renaming network interface while it in the down state.\n\n" \ - "Options:\n" \ - "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \ - "\t-s\t\tUse syslog (LOCAL0 facility)\n" \ - "\tIFNAME MACADDR\tnew_interface_name interface_mac_address" + "Rename network interface while it in the down state" \ + "\n\nOptions:\n" \ + " -c FILE Use configuration file (default is /etc/mactab)\n" \ + " -s Use syslog (LOCAL0 facility)\n" \ + " IFNAME MACADDR new_interface_name interface_mac_address" #define nameif_example_usage \ - "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ - " or\n" \ - "$ nameif -c /etc/my_mactab_file\n" \ + "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ + " or\n" \ + "$ nameif -c /etc/my_mactab_file\n" \ -#ifdef CONFIG_NC_GAPING_SECURITY_HOLE -# define USAGE_NC_EXEC(a) a +#if ENABLE_NC_SERVER || ENABLE_NC_EXTRA +#define NC_OPTIONS_STR "\n\nOptions:" #else -# define USAGE_NC_EXEC(a) +#define NC_OPTIONS_STR #endif + #define nc_trivial_usage \ - "[OPTIONS] [IP] [port]" + USE_NC_EXTRA("[-iN] [-wN] ")USE_NC_SERVER("[-l] [-p PORT] ") \ + "["USE_NC_EXTRA("-f FILENAME|")"IPADDR PORTNUM]"USE_NC_EXTRA(" [-e COMMAND]") #define nc_full_usage \ - "Netcat opens a pipe to IP:port\n\n" \ - "Options:\n" \ - "\t-l\t\tlisten mode, for inbound connects\n" \ - "\t-p PORT\t\tlocal port number\n" \ - "\t-i SECS\t\tdelay interval for lines sent\n" \ - USAGE_NC_EXEC( \ - "\t-e PROG\t\tprogram to exec after connect (dangerous!)\n" \ + "Open a pipe to IP:port" USE_NC_EXTRA(" or file") \ + NC_OPTIONS_STR \ + USE_NC_EXTRA( \ + "\n -e Exec rest of command line after connect" \ + "\n -i SECS Delay interval for lines sent" \ + "\n -w SECS Timeout for connect" \ + "\n -f file Use file (ala /dev/ttyS0) instead of network" \ ) \ - "\t-w SECS\t\ttimeout for connects and final net reads" + USE_NC_SERVER( \ + "\n -l Listen mode, for inbound connects" \ + USE_NC_EXTRA( \ + "\n (use -l twice with -e for persistent server)") \ + "\n -p PORT Local port number" \ + ) + +#define nc_notes_usage "" \ + USE_NC_EXTRA( \ + "To use netcat as a terminal emulator on a serial port:\n\n" \ + "$ stty 115200 -F /dev/ttyS0\n" \ + "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ + ) + #define nc_example_usage \ - "$ nc foobar.somedomain.com 25\n" \ - "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ - "help\n" \ - "214-Commands supported:\n" \ - "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ - "214 NOOP QUIT RSET HELP\n" \ - "quit\n" \ - "221 foobar closing connection\n" + "$ nc foobar.somedomain.com 25\n" \ + "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ + "help\n" \ + "214-Commands supported:\n" \ + "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ + "214 NOOP QUIT RSET HELP\n" \ + "quit\n" \ + "221 foobar closing connection\n" #define netstat_trivial_usage \ - "[-laenrtuwx]" + "[-laenrtuwx]" #define netstat_full_usage \ - "Netstat displays Linux networking information.\n\n" \ - "Options:\n" \ - "\t-l display listening server sockets\n" \ - "\t-a display all sockets (default: connected)\n" \ - "\t-e display other/more information\n" \ - "\t-n don't resolve names\n" \ - "\t-r display routing table\n" \ - "\t-t tcp sockets\n" \ - "\t-u udp sockets\n" \ - "\t-w raw sockets\n" \ - "\t-x unix sockets" + "Display networking information" \ + "\n\nOptions:\n" \ + " -l Display listening server sockets\n" \ + " -a Display all sockets (default: connected)\n" \ + " -e Display other/more information\n" \ + " -n Don't resolve names\n" \ + " -r Display routing table\n" \ + " -t Tcp sockets\n" \ + " -u Udp sockets\n" \ + " -w Raw sockets\n" \ + " -x Unix sockets" #define nice_trivial_usage \ - "[-n ADJUST] [COMMAND [ARG] ...]" + "[-n ADJUST] [COMMAND [ARG] ...]" #define nice_full_usage \ - "Nice runs a program with modified scheduling priority.\n\n" \ - "Options:\n" \ - "\t-n ADJUST\tAdjust the scheduling priority by ADJUST" + "Run a program with modified scheduling priority" \ + "\n\nOptions:\n" \ + " -n ADJUST Adjust the scheduling priority by ADJUST" + +#define nmeter_trivial_usage \ + "format_string" +#define nmeter_full_usage \ + "Monitor system in real time\n\n" \ + "Format specifiers:\n" \ + "%Nc or %[cN] Monitor CPU. N - bar size, default 10\n" \ + " (displays: S:system U:user N:niced D:iowait I:irq i:softirq)\n" \ + "%[niface] Monitor network interface 'iface'\n" \ + "%m Monitor allocated memory\n" \ + "%[mf] Monitor free memory\n" \ + "%[mt] Monitor total memory\n" \ + "%s Monitor allocated swap\n" \ + "%f Monitor number of used file descriptors\n" \ + "%Ni Monitor total/specific IRQ rate\n" \ + "%x Monitor context switch rate\n" \ + "%p Monitor forks\n" \ + "%[pn] Monitor # of processes\n" \ + "%b Monitor block io\n" \ + "%Nt Show time (with N decimal points)\n" \ + "%Nd Milliseconds between updates (default=1000)\n" \ + "%r Print instead of at EOL" +#define nmeter_example_usage \ + "nmeter '%250d%t %20c int %i bio %b mem %m forks%p'" #define nohup_trivial_usage \ - "COMMAND [ARGS]" + "COMMAND [ARGS]" #define nohup_full_usage \ - "run a command immune to hangups, with output to a non-tty" + "Run a command immune to hangups, with output to a non-tty" #define nohup_example_usage \ - "$ nohup make &" + "$ nohup make &" #define nslookup_trivial_usage \ - "[HOST] [SERVER]" + "[HOST] [SERVER]" #define nslookup_full_usage \ - "Queries the nameserver for the IP address of the given HOST\n" \ - "optionally using a specified DNS server" + "Query the nameserver for the IP address of the given HOST\n" \ + "optionally using a specified DNS server" #define nslookup_example_usage \ - "$ nslookup localhost\n" \ - "Server: default\n" \ - "Address: default\n" \ - "\n" \ - "Name: debian\n" \ - "Address: 127.0.0.1\n" + "$ nslookup localhost\n" \ + "Server: default\n" \ + "Address: default\n" \ + "\n" \ + "Name: debian\n" \ + "Address: 127.0.0.1\n" #define od_trivial_usage \ - "[-aBbcDdeFfHhIiLlOovXx] [FILE]" + "[-aBbcDdeFfHhIiLlOovXx] [FILE]" #define od_full_usage \ - "Write an unambiguous representation, octal bytes by default, of FILE\n" \ - "to standard output. With no FILE, or when FILE is -, read standard input." + "Write an unambiguous representation, octal bytes by default, of FILE\n" \ + "to standard output. With no FILE, or when FILE is -, read standard input." #define openvt_trivial_usage \ - " [ARGS...]" + " [ARGS...]" #define openvt_full_usage \ - "Start a command on a new virtual terminal" + "Start a command on a new virtual terminal" #define openvt_example_usage \ - "openvt 2 /bin/ash\n" + "openvt 2 /bin/ash\n" -#ifdef CONFIG_FEATURE_SHA1_PASSWORDS -# define PASSWORD_ALG_TYPES(a) a -#else -# define PASSWORD_ALG_TYPES(a) -#endif #define passwd_trivial_usage \ - "[OPTION] [name]" + "[OPTION] [name]" #define passwd_full_usage \ - "Change a user password. If no name is specified,\n" \ - "changes the password for the current user.\n" \ - "Options:\n" \ - "\t-a\tDefine which algorithm shall be used for the password\n" \ - "\t\t\t(Choices: des, md5" \ - PASSWORD_ALG_TYPES(", sha1") \ - ")\n\t-d\tDelete the password for the specified user account\n" \ - "\t-l\tLocks (disables) the specified user account\n" \ - "\t-u\tUnlocks (re-enables) the specified user account" + "Change a user password. If no name is specified,\n" \ + "changes the password for the current user." \ + "\n\nOptions:\n" \ + " -a Define which algorithm shall be used for the password\n" \ + " (choices: des, md5)\n" /* ", sha1)" */ \ + " -d Delete the password for the specified user account\n" \ + " -l Locks (disables) the specified user account\n" \ + " -u Unlocks (re-enables) the specified user account" #define patch_trivial_usage \ - "[-p] [-i]" + "[-p] [-i ]" #define patch_full_usage \ - "[-p]\n" \ - "[-i]" + " -p NUM Strip NUM leading components from file names\n" \ + " -i DIFF Read DIFF instead of stdin" #define patch_example_usage \ - "$ patch -p1 ] [-n] [-f]" + "[-d] [-n] [-f]" #define poweroff_full_usage \ - "Halt and shut off power.\n" \ - "Options:\n" \ - "\t-d\t\tdelay interval for halting\n" \ - "\t-n\t\tno call to sync()\n" \ - "\t-f\t\tforce power off (don't go through init)" + "Halt and shut off power" \ + "\n\nOptions:\n" \ + " -d Delay interval for halting\n" \ + " -n No call to sync()\n" \ + " -f Force power off (don't go through init)" #define printenv_trivial_usage \ - "[VARIABLES...]" + "[VARIABLES...]" #define printenv_full_usage \ - "print all or part of environment\n\n" \ - "If no environment VARIABLE specified, print them all." + "Print all or part of environment.\n" \ + "If no environment VARIABLE specified, print them all." #define printf_trivial_usage \ - "FORMAT [ARGUMENT...]" + "FORMAT [ARGUMENT...]" #define printf_full_usage \ - "Formats and prints ARGUMENT(s) according to FORMAT,\n" \ - "Where FORMAT controls the output exactly as in C printf." + "Format and print ARGUMENT(s) according to FORMAT,\n" \ + "where FORMAT controls the output exactly as in C printf" #define printf_example_usage \ - "$ printf \"Val=%d\\n\" 5\n" \ - "Val=5\n" + "$ printf \"Val=%d\\n\" 5\n" \ + "Val=5\n" + + +#if ENABLE_DESKTOP + +#define ps_trivial_usage \ + "" +#define ps_full_usage \ + "Report process status" \ + "\n\nOptions:" \ + "\n -o col1,col2=header Select columns for display" \ + +#else /* !ENABLE_DESKTOP */ #if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE -#define USAGE_PS "\n\tThis version of ps accepts no options." +#define USAGE_PS "\nThis version of ps accepts no options" #else #define USAGE_PS "\nOptions:" #endif -#if ENABLE_FEATURE_PS_WIDE -#define USAGE_PS_WIDE(a) a -#else -#define USAGE_PS_WIDE(a) -#endif #define ps_trivial_usage \ - "" + "" #define ps_full_usage \ - "Report process status\n" \ + "Report process status\n" \ USAGE_PS \ - USAGE_SELINUX("\n\t-c\tshow SE Linux context") \ - USAGE_PS_WIDE("\n\tw\twide output") + USE_SELINUX( \ + "\n -c Show SE Linux context") \ + USE_FEATURE_PS_WIDE( \ + "\n w Wide output") + +#endif /* ENABLE_DESKTOP */ #define ps_example_usage \ - "$ ps\n" \ - " PID Uid Gid State Command\n" \ - " 1 root root S init\n" \ - " 2 root root S [kflushd]\n" \ - " 3 root root S [kupdate]\n" \ - " 4 root root S [kpiod]\n" \ - " 5 root root S [kswapd]\n" \ - " 742 andersen andersen S [bash]\n" \ - " 743 andersen andersen S -bash\n" \ - " 745 root root S [getty]\n" \ - " 2990 andersen andersen R ps\n" + "$ ps\n" \ + " PID Uid Gid State Command\n" \ + " 1 root root S init\n" \ + " 2 root root S [kflushd]\n" \ + " 3 root root S [kupdate]\n" \ + " 4 root root S [kpiod]\n" \ + " 5 root root S [kswapd]\n" \ + " 742 andersen andersen S [bash]\n" \ + " 743 andersen andersen S -bash\n" \ + " 745 root root S [getty]\n" \ + " 2990 andersen andersen R ps\n" + #define pwd_trivial_usage \ - "" + "" #define pwd_full_usage \ - "Print the full filename of the current working directory." + "Print the full filename of the current working directory" #define pwd_example_usage \ - "$ pwd\n" \ - "/root\n" + "$ pwd\n" \ + "/root\n" + +#define raidautorun_trivial_usage \ + "DEVICE" +#define raidautorun_full_usage \ + "Tell the kernel to automatically search and start RAID arrays" +#define raidautorun_example_usage \ + "$ raidautorun /dev/md0" #define rdate_trivial_usage \ - "[-sp] HOST" + "[-sp] HOST" #define rdate_full_usage \ - "Get and possibly set the system date and time from a remote HOST.\n\n" \ - "Options:\n" \ - "\t-s\tSet the system date and time (default)\n" \ - "\t-p\tPrint the date and time" + "Get and possibly set the system date and time from a remote HOST" \ + "\n\nOptions:\n" \ + " -s Set the system date and time (default)\n" \ + " -p Print the date and time" -#ifdef CONFIG_FEATURE_READLINK_FOLLOW -#define USAGE_READLINK_FOLLOW(a) a -#else -#define USAGE_READLINK_FOLLOW(a) -#endif +#define readahead_trivial_usage \ + "[FILE]..." +#define readahead_full_usage \ + "Preload FILE(s) in RAM cache so that subsequent reads for those" \ + "files do not block on disk I/O" #define readlink_trivial_usage \ - USAGE_READLINK_FOLLOW("[-f] ") "FILE" + USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE" #define readlink_full_usage \ - "Displays the value of a symbolic link." \ - USAGE_READLINK_FOLLOW("\n\nOptions:\n" \ - "\t-f\tcanonicalize by following all symlinks") + "Display the value of a symbolic link" \ + USE_FEATURE_READLINK_FOLLOW( \ + "\n\nOptions:\n" \ + " -f Canonicalize by following all symlinks") #define readprofile_trivial_usage \ - "[OPTIONS]..." + "[OPTIONS]..." #define readprofile_full_usage \ - "Options:\n" \ - "\t -m (default: /boot/System.map)\n" \ - "\t -p (default: /proc/profile)\n" \ - "\t -M set the profiling multiplier to \n" \ - "\t -i print only info about the sampling step\n" \ - "\t -v print verbose data\n" \ - "\t -a print all symbols, even if count is 0\n" \ - "\t -b print individual histogram-bin counts\n" \ - "\t -s print individual counters within functions\n" \ - "\t -r reset all the counters (root only)\n" \ - "\t -n disable byte order auto-detection" + "Options:\n" \ + " -m (Default: /boot/System.map)\n" \ + " -p (Default: /proc/profile)\n" \ + " -M Set the profiling multiplier to \n" \ + " -i Print only info about the sampling step\n" \ + " -v Print verbose data\n" \ + " -a Print all symbols, even if count is 0\n" \ + " -b Print individual histogram-bin counts\n" \ + " -s Print individual counters within functions\n" \ + " -r Reset all the counters (root only)\n" \ + " -n Disable byte order auto-detection" #define realpath_trivial_usage \ - "pathname ..." + "pathname ..." #define realpath_full_usage \ - "Returns the absolute pathnames of given argument." + "Return the absolute pathnames of given argument" #define reboot_trivial_usage \ - "[-d] [-n] [-f]" + "[-d] [-n] [-f]" #define reboot_full_usage \ - "Reboot the system.\n" \ - "Options:\n" \ - "\t-d\t\tdelay interval for rebooting\n" \ - "\t-n\t\tno call to sync()\n" \ - "\t-f\t\tforce reboot (don't go through init)" + "Reboot the system" \ + "\n\nOptions:\n" \ + " -d Delay interval for rebooting\n" \ + " -n No call to sync()\n" \ + " -f Force reboot (don't go through init)" #define renice_trivial_usage \ - "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]" + "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]" #define renice_full_usage \ - "Changes priority of running processes.\n\n" \ - "Options:\n" \ - "\t-n\tadjusts current nice value (smaller is faster)\n" \ - "\t-p\tprocess id(s) (default)\n" \ - "\t-g\tprocess group id(s)\n" \ - "\t-u\tprocess user name(s) and/or id(s)" + "Change priority of running processes" \ + "\n\nOptions:\n" \ + " -n Adjusts current nice value (smaller is faster)\n" \ + " -p Process id(s) (default)\n" \ + " -g Process group id(s)\n" \ + " -u Process user name(s) and/or id(s)" #define reset_trivial_usage \ - "" + "" #define reset_full_usage \ - "Resets the screen." + "Reset the screen" + +#define resize_trivial_usage \ + "" +#define resize_full_usage \ + "Resize the screen" #define rm_trivial_usage \ - "[OPTION]... FILE..." + "[OPTION]... FILE..." #define rm_full_usage \ - "Remove (unlink) the FILE(s). You may use '--' to\n" \ - "indicate that all following arguments are non-options.\n\n" \ - "Options:\n" \ - "\t-i\t\talways prompt before removing each destination\n" \ - "\t-f\t\tremove existing destinations, never prompt\n" \ - "\t-r or -R\tremove the contents of directories recursively" + "Remove (unlink) the FILE(s). You may use '--' to\n" \ + "indicate that all following arguments are non-options." \ + "\n\nOptions:\n" \ + " -i Always prompt before removing each destination\n" \ + " -f Remove existing destinations, never prompt\n" \ + " -r,-R Remove the contents of directories recursively" #define rm_example_usage \ - "$ rm -rf /tmp/foo\n" + "$ rm -rf /tmp/foo\n" #define rmdir_trivial_usage \ - "[OPTION]... DIRECTORY..." + "[OPTION]... DIRECTORY..." #define rmdir_full_usage \ - "Remove the DIRECTORY(ies), if they are empty." + "Remove the DIRECTORY, if it is empty" #define rmdir_example_usage \ - "# rmdir /tmp/foo\n" + "# rmdir /tmp/foo\n" #define rmmod_trivial_usage \ - "[OPTION]... [MODULE]..." + "[OPTION]... [MODULE]..." #define rmmod_full_usage \ - "Unloads the specified kernel modules from the kernel.\n\n" \ - "Options:\n" \ - "\t-a\tRemove all unused modules (recursively)" + "Unload the specified kernel modules from the kernel" \ + "\n\nOptions:\n" \ + " -a Remove all unused modules (recursively)" #define rmmod_example_usage \ - "$ rmmod tulip\n" - -#ifdef CONFIG_FEATURE_IPV6 -# define USAGE_ROUTE_IPV6(a) a -#else -# define USAGE_ROUTE_IPV6(a) "\t" -#endif - + "$ rmmod tulip\n" #define route_trivial_usage \ - "[{add|del|delete}]" + "[{add|del|delete}]" #define route_full_usage \ - "Edit the kernel's routing tables.\n\n" \ - "Options:\n" \ - "\t-n\t\tDont resolve names\n" \ - "\t-e\t\tDisplay other/more information\n" \ - "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family" + "Edit the kernel's routing tables" \ + "\n\nOptions:\n" \ + " -n Dont resolve names\n" \ + " -e Display other/more information\n" \ + " -A inet" USE_FEATURE_IPV6("{6}") " Select address family" #define rpm_trivial_usage \ - "-i -q[ildc]p package.rpm" + "-i -q[ildc]p package.rpm" #define rpm_full_usage \ - "Manipulates RPM packages" \ - "\n\nOptions:" \ - "\n\t-i Install package" \ - "\n\t-q Query package" \ - "\n\t-p Query uninstalled package" \ - "\n\t-i Show information" \ - "\n\t-l List contents" \ - "\n\t-d List documents" \ - "\n\t-c List config files" + "Manipulate RPM packages" \ + "\n\nOptions:" \ + "\n -i Install package" \ + "\n -q Query package" \ + "\n -p Query uninstalled package" \ + "\n -i Show information" \ + "\n -l List contents" \ + "\n -d List documents" \ + "\n -c List config files" #define rpm2cpio_trivial_usage \ - "package.rpm" + "package.rpm" #define rpm2cpio_full_usage \ - "Outputs a cpio archive of the rpm file." + "Output a cpio archive of the rpm file" #define run_parts_trivial_usage \ - "[-t] [-a ARG] [-u MASK] DIRECTORY" + "[-t] [-a ARG] [-u MASK] DIRECTORY" #define run_parts_full_usage \ - "Run a bunch of scripts in a directory.\n\n" \ - "Options:\n" \ - "\t-t\tPrints what would be run, but does not actually run anything\n" \ - "\t-a ARG\tPass ARG as an argument for every program invoked\n" \ - "\t-u MASK\tSet the umask to MASK before executing every program" + "Run a bunch of scripts in a directory" \ + "\n\nOptions:\n" \ + " -t Prints what would be run, but does not actually run anything\n" \ + " -a ARG Pass ARG as an argument for every program invoked\n" \ + " -u MASK Set the umask to MASK before executing every program" #define runlevel_trivial_usage \ - "[utmp]" + "[utmp]" #define runlevel_full_usage \ - "Find the current and previous system runlevel.\n\n" \ - "If no utmp file exists or if no runlevel record can be found,\n" \ - "runlevel prints \"unknown\"" + "Find the current and previous system runlevel.\n\n" \ + "If no utmp file exists or if no runlevel record can be found,\n" \ + "print \"unknown\"" #define runlevel_example_usage \ - "$ runlevel /var/run/utmp\n" \ - "N 2" + "$ runlevel /var/run/utmp\n" \ + "N 2" + +#define runsv_trivial_usage \ + "dir" +#define runsv_full_usage \ + "Start and monitor a service and optionally an appendant log service" + +#define runsvdir_trivial_usage \ + "[-P] dir" +#define runsvdir_full_usage \ + "Start a runsv process for each subdirectory" #define rx_trivial_usage \ - "FILE" + "FILE" #define rx_full_usage \ - "Receive a file using the xmodem protocol." + "Receive a file using the xmodem protocol" #define rx_example_usage \ - "$ rx /tmp/foo\n" + "$ rx /tmp/foo\n" #define sed_trivial_usage \ - "[-efinr] pattern [files...]" + "[-efinr] pattern [files...]" #define sed_full_usage \ - "Options:\n" \ - "\t-e script\tadd the script to the commands to be executed\n" \ - "\t-f scriptfile\tadd script-file contents to the\n" \ - "\t\t\tcommands to be executed\n" \ - "\t-i\t\tedit files in-place\n" \ - "\t-n\t\tsuppress automatic printing of pattern space\n" \ - "\t-r\t\tuse extended regular expression syntax\n" \ - "\n" \ - "If no -e or -f is given, the first non-option argument is taken as the sed\n" \ - "script to interpret. All remaining arguments are names of input files; if no\n" \ - "input files are specified, then the standard input is read. Source files\n" \ - "will not be modified unless -i option is given." + "Options:\n" \ + " -e script Add the script to the commands to be executed\n" \ + " -f scriptfile Add script-file contents to the\n" \ + " commands to be executed\n" \ + " -i Edit files in-place\n" \ + " -n Suppress automatic printing of pattern space\n" \ + " -r Use extended regular expression syntax\n" \ + "\n" \ + "If no -e or -f is given, the first non-option argument is taken as the sed\n" \ + "script to interpret. All remaining arguments are names of input files; if no\n" \ + "input files are specified, then the standard input is read. Source files\n" \ + "will not be modified unless -i option is given." #define sed_example_usage \ - "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ - "bar\n" + "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ + "bar\n" #define seq_trivial_usage \ - "[first [increment]] last" + "[first [increment]] last" #define seq_full_usage \ - "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \ - "FIRST, INCREMENT default to 1\n" \ - "Arguments:\n" \ - "\tLAST\n" \ - "\tFIRST\tLAST\n" \ - "\tFIRST\tINCREMENT\tLAST" + "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \ + "FIRST, INCREMENT default to 1" \ + "\n\nArguments:\n" \ + " LAST\n" \ + " FIRST LAST\n" \ + " FIRST INCREMENT LAST" #define setconsole_trivial_usage \ - "[-r|--reset] [DEVICE]" + "[-r|--reset] [DEVICE]" #define setconsole_full_usage \ - "Redirects system console output to DEVICE (default: /dev/tty).\n\n" \ - "Options:\n" \ - "\t-r\tReset output to /dev/console." + "Redirect system console output to DEVICE (default: /dev/tty)" \ + "\n\nOptions:\n" \ + " -r Reset output to /dev/console" #define setkeycodes_trivial_usage \ - "SCANCODE KEYCODE ..." + "SCANCODE KEYCODE ..." #define setkeycodes_full_usage \ - "Set entries into the kernel's scancode-to-keycode map,\n" \ - "allowing unusual keyboards to generate usable keycodes.\n\n" \ - "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ - "and KEYCODE is given in decimal" + "Set entries into the kernel's scancode-to-keycode map,\n" \ + "allowing unusual keyboards to generate usable keycodes.\n\n" \ + "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ + "and KEYCODE is given in decimal" #define setkeycodes_example_usage \ - "$ setkeycodes e030 127\n" + "$ setkeycodes e030 127\n" #define setlogcons_trivial_usage \ - "N" + "N" #define setlogcons_full_usage \ - "Redirects the kernel output to console N (0 for current)." + "Redirect the kernel output to console N (0 for current)" #define setsid_trivial_usage \ - "program [arg ...]" + "program [arg ...]" #define setsid_full_usage \ - "Runs any program in a new session by calling setsid() before\n" \ - "exec'ing the rest of its arguments. See setsid(2) for details." + "Run any program in a new session by calling setsid() before\n" \ + "exec'ing the rest of its arguments. See setsid(2) for details." #define lash_trivial_usage \ - "[FILE]...\n" \ - "or: sh -c command [args]..." + "[FILE]...\n" \ + "or: sh -c command [args]..." #define lash_full_usage \ - "The BusyBox LAme SHell (command interpreter)" + "The BusyBox LAme SHell (command interpreter)" #define lash_notes_usage \ - "This command does not yet have proper documentation.\n\n" \ - "Use lash just as you would use any other shell. It properly handles pipes,\n" \ - "redirects, job control, can be used as the shell for scripts, and has a\n" \ - "sufficient set of builtins to do what is needed. It does not (yet) support\n" \ - "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \ - "use ash or bash. If you just need a very simple and extremely small shell,\n" \ - "this will do the job." + "This command does not yet have proper documentation.\n\n" \ + "Use lash just as you would use any other shell. It properly handles pipes,\n" \ + "redirects, job control, can be used as the shell for scripts, and has a\n" \ + "sufficient set of builtins to do what is needed. It does not (yet) support\n" \ + "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \ + "use ash or bash. If you just need a very simple and extremely small shell,\n" \ + "this will do the job." #define last_trivial_usage \ - "" + "" #define last_full_usage \ - "Shows listing of the last users that logged into the system" + "Show listing of the last users that logged into the system" #define sha1sum_trivial_usage \ - "[OPTION] [FILEs...]" \ - USAGE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") + "[OPTION] [FILEs...]" \ + USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") #define sha1sum_full_usage \ - "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \ - "Options:\n" \ - "With no FILE, or when FILE is -, read standard input." \ - USAGE_MD5_SHA1_SUM_CHECK("\n\n" \ - "\t-c\tcheck SHA1 sums against given list\n" \ - "\nThe following two options are useful only when verifying checksums:\n" \ - "\t-s\tdon't output anything, status code shows success\n" \ - "\t-w\twarn about improperly formated SHA1 checksum lines") - -#ifdef CONFIG_FEATURE_FANCY_SLEEP -# define USAGE_FANCY_SLEEP(a) a -# define USAGE_NOT_FANCY_SLEEP(a) -#else -# define USAGE_FANCY_SLEEP(a) -# define USAGE_NOT_FANCY_SLEEP(a) a -#endif + "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \ + "With no FILE, or when FILE is -, read standard input." \ + "\n\nOptions:\n" \ + USE_FEATURE_MD5_SHA1_SUM_CHECK( \ + " -c Check SHA1 sums against given list\n" \ + "\nThe following two options are useful only when verifying checksums:\n" \ + " -s Don't output anything, status code shows success\n" \ + " -w Warn about improperly formatted SHA1 checksum lines") #define sleep_trivial_usage \ - USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...") + USE_FEATURE_FANCY_SLEEP("[") "N" USE_FEATURE_FANCY_SLEEP("]...") #define sleep_full_usage \ - USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \ - USAGE_FANCY_SLEEP( \ - "Pause for a time equal to the total of the args given, where each arg can\n" \ - "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.") + SKIP_FEATURE_FANCY_SLEEP("Pause for N seconds") \ + USE_FEATURE_FANCY_SLEEP( \ + "Pause for a time equal to the total of the args given, where each arg can\n" \ + "have an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays") #define sleep_example_usage \ - "$ sleep 2\n" \ - "[2 second delay results]\n" \ - USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \ - "[98528 second delay results]\n") - -#if ENABLE_FEATURE_SORT_BIG -# define USAGE_SORT_BIG(a) a -#else -# define USAGE_SORT_BIG(a) -#endif + "$ sleep 2\n" \ + "[2 second delay results]\n" \ + USE_FEATURE_FANCY_SLEEP( \ + "$ sleep 1d 3h 22m 8s\n" \ + "[98528 second delay results]\n") #define sort_trivial_usage \ - "[-nru" USAGE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") "] [FILE]..." + "[-nru" \ + USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") \ + "] [FILE]..." #define sort_full_usage \ - "Sorts lines of text in the specified files\n\n" \ - "Options:\n" \ - USAGE_SORT_BIG( \ - "\t-b\tignore leading blanks\n" \ - "\t-c\tcheck whether input is sorted\n" \ - "\t-d\tdictionary order (blank or alphanumeric only)\n" \ - "\t-f\tignore case\n" \ - "\t-g\tgeneral numerical sort\n" \ - "\t-i\tignore unprintable characters\n" \ - "\t-k\tspecify sort key\n" \ - "\t-M\tsort month\n" \ - ) \ - "\t-n\tsort numbers\n" \ - USAGE_SORT_BIG( \ - "\t-o\toutput to file\n" \ - "\t-k\tsort by key\n" \ - "\t-t\tuse key separator other than whitespace\n" \ - ) \ - "\t-r\treverse sort order\n" \ - USAGE_SORT_BIG("\t-s\tstable (don't sort ties alphabetically)\n") \ - "\t-u\tsuppress duplicate lines" \ - USAGE_SORT_BIG("\n\t-z\tinput terminated by nulls, not newlines\n") \ - USAGE_SORT_BIG("\t-mST\tignored for GNU compatibility") \ - "" + "Sort lines of text in the specified files" \ + "\n\nOptions:\n" \ + USE_FEATURE_SORT_BIG( \ + " -b Ignore leading blanks\n" \ + " -c Check whether input is sorted\n" \ + " -d Dictionary order (blank or alphanumeric only)\n" \ + " -f Ignore case\n" \ + " -g General numerical sort\n" \ + " -i Ignore unprintable characters\n" \ + " -k Specify sort key\n" \ + " -M Sort month\n") \ + " -n Sort numbers\n" \ + USE_FEATURE_SORT_BIG( \ + " -o Output to file\n" \ + " -k Sort by key\n" \ + " -t Use key separator other than whitespace\n") \ + " -r Reverse sort order\n" \ + USE_FEATURE_SORT_BIG( \ + " -s Stable (don't sort ties alphabetically)\n") \ + " -u Suppress duplicate lines" \ + USE_FEATURE_SORT_BIG( \ + "\n -z Input terminated by nulls, not newlines\n") \ + USE_FEATURE_SORT_BIG( \ + " -mST Ignored for GNU compatibility") \ + "" #define sort_example_usage \ - "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ - "a\n" \ - "b\n" \ - "c\n" \ - "d\n" \ - "e\n" \ - "f\n" \ - USAGE_SORT_BIG( \ + "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ + "a\n" \ + "b\n" \ + "c\n" \ + "d\n" \ + "e\n" \ + "f\n" \ + USE_FEATURE_SORT_BIG( \ "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ "d 2\n" \ "b 2\n" \ "c 3\n" \ ) \ - "" + "" #define start_stop_daemon_trivial_usage \ - "[OPTIONS] [--start|--stop] ... [-- arguments...]" + "[OPTIONS] [--start|--stop] ... [-- arguments...]" #define start_stop_daemon_full_usage \ - "Program to start and stop services." \ - "\n\nOptions:" \ - "\n\t-S|--start\t\t\tstart" \ - "\n\t-K|--stop\t\t\tstop" \ - "\n\t-a|--startas \t\tstarts process specified by pathname" \ - "\n\t-b|--background\t\t\tforce process into background" \ - "\n\t-u|--user |\tstop this user's processes" \ - "\n\t-x|--exec \t\tprogram to either start or check" \ - "\n\t-m|--make-pidfile \tcreate the -p file and enter pid in it" \ - "\n\t-n|--name \tstop processes with this name" \ - "\n\t-p|--pidfile \t\tsave or load pid using a pid-file" \ - "\n\t-q|--quiet\t\t\tbe quiet" \ - "\n\t-s|--signal \t\tsignal to send (default TERM)" - -#ifdef CONFIG_FEATURE_STAT_FORMAT -# define USAGE_STAT_FORMAT(a) a -#else -# define USAGE_STAT_FORMAT(a) -#endif + "Start and stop services" \ + "\n\nOptions:" \ + "\n -S|--start Start" \ + "\n -K|--stop Stop" \ + "\n -a|--startas Starts process specified by pathname" \ + "\n -b|--background Force process into background" \ + "\n -u|--user | Stop this user's processes" \ + "\n -x|--exec Program to either start or check" \ + "\n -m|--make-pidfile Create the -p file and enter pid in it" \ + "\n -n|--name Stop processes with this name" \ + "\n -p|--pidfile Save or load pid using a pid-file" \ + "\n -q|--quiet Be quiet" \ + USE_FEATURE_START_STOP_DAEMON_FANCY( \ + "\n -o|--oknodo Exit status 0 if nothing done" \ + "\n -v|--verbose Be verbose" \ + "\n -N|--nicelevel Add N to process's nice level" \ + ) \ + "\n -s|--signal Signal to send (default TERM)" \ + "\n -U|--chuid | Start process with this name" + #define stat_trivial_usage \ - "[OPTION] FILE..." + "[OPTION] FILE..." #define stat_full_usage \ - "display file (default) or filesystem status.\n\n" \ - "Options:\n" \ - USAGE_STAT_FORMAT("\t-c fmt\tuse the specified format\n") \ - "\t-f\tdisplay filesystem status\n" \ - "\t-L,-l\tdereference links\n" \ - "\t-t\tdisplay info in terse form\n" \ - USAGE_STAT_FORMAT( \ - "\nValid format sequences for files:\n" \ - " %a Access rights in octal\n" \ - " %A Access rights in human readable form\n" \ - " %b Number of blocks allocated (see %B)\n" \ - " %B The size in bytes of each block reported by %b\n" \ - " %d Device number in decimal\n" \ - " %D Device number in hex\n" \ - " %f Raw mode in hex\n" \ - " %F File type\n" \ - " %g Group ID of owner\n" \ - " %G Group name of owner\n" \ - " %h Number of hard links\n" \ - " %i Inode number\n" \ - " %n File name\n" \ - " %N Quoted file name with dereference if symbolic link\n" \ - " %o I/O block size\n" \ - " %s Total size, in bytes\n" \ - " %t Major device type in hex\n" \ - " %T Minor device type in hex\n" \ - " %u User ID of owner\n" \ - " %U User name of owner\n" \ - " %x Time of last access\n" \ - " %X Time of last access as seconds since Epoch\n" \ - " %y Time of last modification\n" \ - " %Y Time of last modification as seconds since Epoch\n" \ - " %z Time of last change\n" \ - " %Z Time of last change as seconds since Epoch\n" \ - "\nValid format sequences for file systems:\n" \ - " %a Free blocks available to non-superuser\n" \ - " %b Total data blocks in file system\n" \ - " %c Total file nodes in file system\n" \ - " %d Free file nodes in file system\n" \ - " %f Free blocks in file system\n" \ - " %i File System ID in hex\n" \ - " %l Maximum length of filenames\n" \ - " %n File name\n" \ - " %s Block size (for faster transfers)\n" \ - " %S Fundamental block size (for block counts)\n" \ - " %t Type in hex\n" \ - " %T Type in human readable form\n" \ + "Display file (default) or filesystem status" \ + "\n\nOptions:\n" \ + USE_FEATURE_STAT_FORMAT( \ + " -c fmt Use the specified format\n") \ + " -f Display filesystem status\n" \ + " -L,-l Dereference links\n" \ + " -t Display info in terse form" \ + USE_FEATURE_STAT_FORMAT( \ + "\n\nValid format sequences for files:\n" \ + " %a Access rights in octal\n" \ + " %A Access rights in human readable form\n" \ + " %b Number of blocks allocated (see %B)\n" \ + " %B The size in bytes of each block reported by %b\n" \ + " %d Device number in decimal\n" \ + " %D Device number in hex\n" \ + " %f Raw mode in hex\n" \ + " %F File type\n" \ + " %g Group ID of owner\n" \ + " %G Group name of owner\n" \ + " %h Number of hard links\n" \ + " %i Inode number\n" \ + " %n File name\n" \ + " %N Quoted file name with dereference if symbolic link\n" \ + " %o I/O block size\n" \ + " %s Total size, in bytes\n" \ + " %t Major device type in hex\n" \ + " %T Minor device type in hex\n" \ + " %u User ID of owner\n" \ + " %U User name of owner\n" \ + " %x Time of last access\n" \ + " %X Time of last access as seconds since Epoch\n" \ + " %y Time of last modification\n" \ + " %Y Time of last modification as seconds since Epoch\n" \ + " %z Time of last change\n" \ + " %Z Time of last change as seconds since Epoch\n" \ + "\nValid format sequences for file systems:\n" \ + " %a Free blocks available to non-superuser\n" \ + " %b Total data blocks in file system\n" \ + " %c Total file nodes in file system\n" \ + " %d Free file nodes in file system\n" \ + " %f Free blocks in file system\n" \ + " %i File System ID in hex\n" \ + " %l Maximum length of filenames\n" \ + " %n File name\n" \ + " %s Block size (for faster transfers)\n" \ + " %S Fundamental block size (for block counts)\n" \ + " %t Type in hex\n" \ + " %T Type in human readable form" \ ) #define strings_trivial_usage \ - "[-afo] [-n length] [file ... ]" + "[-afo] [-n length] [file ... ]" #define strings_full_usage \ - "Display printable strings in a binary file." \ - "\n\nOptions:" \ - "\n\t-a\tScan the whole files (this is the default)." \ - "\n\t-f\tPrecede each string with the name of the file where it was found." \ - "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \ - "\n\t-o\tEach string is preceded by its decimal offset in the file" + "Display printable strings in a binary file" \ + "\n\nOptions:" \ + "\n -a Scan the whole files (this is the default)" \ + "\n -f Precede each string with the name of the file where it was found" \ + "\n -n N Specifies that at least N characters forms a sequence (default 4)" \ + "\n -o Each string is preceded by its decimal offset in the file" #define stty_trivial_usage \ - "[-a|g] [-F DEVICE] [SETTING]..." + "[-a|g] [-F DEVICE] [SETTING]..." #define stty_full_usage \ - "Without arguments, prints baud rate, line discipline," \ - "\nand deviations from stty sane." \ - "\n\nOptions:" \ - "\n\t-F DEVICE\topen device instead of stdin" \ - "\n\t-a\t\tprint all current settings in human-readable form" \ - "\n\t-g\t\tprint in stty-readable form" \ - "\n\t[SETTING]\tsee manpage" + "Without arguments, prints baud rate, line discipline,\n" \ + "and deviations from stty sane" \ + "\n\nOptions:" \ + "\n -F DEVICE Open device instead of stdin" \ + "\n -a Print all current settings in human-readable form" \ + "\n -g Print in stty-readable form" \ + "\n [SETTING] See manpage" #define su_trivial_usage \ - "[OPTION]... [-] [username]" + "[OPTION]... [-] [username]" #define su_full_usage \ - "Change user id or become root.\n" \ - "Options:\n" \ - "\t-p, -m\tPreserve environment" \ - "\n\t-c\tCommand to pass to 'sh -c'" \ - "\n\t-s\tShell to use instead of default shell" + "Change user id or become root" \ + "\n\nOptions:" \ + "\n -p, -m Preserve environment" \ + "\n -c Command to pass to 'sh -c'" \ + "\n -s Shell to use instead of default shell" #define sulogin_trivial_usage \ - "[OPTION]... [tty-device]" + "[OPTION]... [tty-device]" #define sulogin_full_usage \ - "Single user login\n" \ - "Options:\n" \ - "\t-f\tDo not authenticate (user already authenticated)\n" \ - "\t-h\tName of the remote host for this login\n" \ - "\t-p\tPreserve environment" + "Single user login" \ + "\n\nOptions:" \ + "\n -t Timeout" #define sum_trivial_usage \ - "[rs] [files...]" + "[rs] [files...]" #define sum_full_usage \ - "checksum and count the blocks in a file\n\n" \ - "Options:\n" \ - "\t-r\tuse BSD sum algorithm (1K blocks)\n" \ - "\t-s\tuse System V sum algorithm (512byte blocks)" + "Checksum and count the blocks in a file" \ + "\n\nOptions:\n" \ + " -r Use BSD sum algorithm (1K blocks)\n" \ + " -s Use System V sum algorithm (512byte blocks)" + +#define sv_trivial_usage \ + "[-v] [-w sec] command service..." +#define sv_full_usage \ + "Report the current status and control the state of services " \ + "monitored by the runsv supervisor" + +#define svlogd_trivial_usage \ + "[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..." +#define svlogd_full_usage \ + "Continuously read log data from standard input, optionally " \ + "filter log messages, and write the data to one or more automatically " \ + "rotated logs" #define swapoff_trivial_usage \ - "[-a] [DEVICE]" + "[-a] [DEVICE]" #define swapoff_full_usage \ - "Stop swapping virtual memory pages on DEVICE.\n\n" \ - "Options:\n" \ - "\t-a\tStop swapping on all swap devices" + "Stop swapping virtual memory pages on DEVICE" \ + "\n\nOptions:\n" \ + " -a Stop swapping on all swap devices" #define swapon_trivial_usage \ - "[-a] [DEVICE]" + "[-a] [DEVICE]" #define swapon_full_usage \ - "Start swapping virtual memory pages on DEVICE.\n\n" \ - "Options:\n" \ - "\t-a\tStart swapping on all swap devices" + "Start swapping virtual memory pages on DEVICE" \ + "\n\nOptions:\n" \ + " -a Start swapping on all swap devices" #define switch_root_trivial_usage \ - "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" + "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" #define switch_root_full_usage \ - "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ - "and exec NEW_INIT.\n\n" \ - "Options:\n" \ - "\t-c\tRedirect console to device on new root" + "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ + "and exec NEW_INIT" \ + "\n\nOptions:\n" \ + " -c Redirect console to device on new root" #define sync_trivial_usage \ - "" + "" #define sync_full_usage \ - "Write all buffered filesystem blocks to disk." - - -#ifdef CONFIG_FEATURE_ROTATE_LOGFILE -# define USAGE_ROTATE_LOGFILE(a) a -#else -# define USAGE_ROTATE_LOGFILE(a) -#endif -#ifdef CONFIG_FEATURE_REMOTE_LOG -# define USAGE_REMOTE_LOG(a) a -#else -# define USAGE_REMOTE_LOG(a) -#endif -#ifdef CONFIG_FEATURE_IPC_SYSLOG -# define USAGE_IPC_LOG(a) a -#else -# define USAGE_IPC_LOG(a) -#endif + "Write all buffered filesystem blocks to disk" #define sysctl_trivial_usage \ - "[OPTIONS]... [VALUE]..." + "[OPTIONS]... [VALUE]..." #define sysctl_full_usage \ - "configure kernel parameters at runtime\n\n" \ - "Options:\n" \ - "\t-n\tUse this option to disable printing of the key name when printing values\n" \ - "\t-w\tUse this option when you want to change a sysctl setting\n" \ - "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \ - "\t-a\tDisplay all values currently available\n" \ - "\t-A\tDisplay all values currently available in table form" + "Configure kernel parameters at runtime" \ + "\n\nOptions:\n" \ + " -n Use this option to disable printing of the key name when printing values\n" \ + " -w Use this option when you want to change a sysctl setting\n" \ + " -p Load in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \ + " -a Display all values currently available\n" \ + " -A Display all values currently available in table form" #define sysctl_example_usage \ - "sysctl [-n] variable ...\n" \ - "sysctl [-n] -w variable=value ...\n" \ - "sysctl [-n] -a\n" \ - "sysctl [-n] -p \t(default /etc/sysctl.conf)\n" \ - "sysctl [-n] -A\n" + "sysctl [-n] variable ...\n" \ + "sysctl [-n] -w variable=value ...\n" \ + "sysctl [-n] -a\n" \ + "sysctl [-n] -p (default /etc/sysctl.conf)\n" \ + "sysctl [-n] -A\n" #define syslogd_trivial_usage \ - "[OPTION]..." + "[OPTION]..." #define syslogd_full_usage \ - "Linux system and kernel logging utility.\n" \ - "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \ - "Options:\n" \ - "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \ - "\t-n\t\tRun as a foreground process\n" \ - "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)\n" \ - "\t-S\t\tMake logging output smaller." \ - USAGE_ROTATE_LOGFILE( \ - "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \ - "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \ - USAGE_REMOTE_LOG( \ - "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \ - "\t-L\t\tLog locally and via network logging (default is network only)") \ - USAGE_IPC_LOG( \ - "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)") + "System logging utility.\n" \ + "Note that this version of syslogd ignores /etc/syslog.conf." \ + "\n\nOptions:" \ + "\n -m MIN Minutes between MARK lines (default=20, 0=off)" \ + "\n -n Run as foreground process" \ + "\n -O FILE Use an alternate log file (default=/var/log/messages)" \ + "\n -l n Sets the local log level of messages to n" \ + "\n -S Make logging output smaller" \ + USE_FEATURE_ROTATE_LOGFILE( \ + "\n -s SIZE Max size (KB) before rotate (default=200KB, 0=off)" \ + "\n -b NUM Number of rotated logs to keep (default=1, max=99, 0=purge)") \ + USE_FEATURE_REMOTE_LOG( \ + "\n -R HOST[:PORT] Log to IP or hostname on PORT (default PORT=514/UDP)" \ + "\n -L Log locally and via network logging (default is network only)") \ + USE_FEATURE_IPC_SYSLOG( \ + "\n -C[size(KiB)] Log to a shared mem buffer (read the buffer using logread)") + /* NB: -Csize shouldn't have space (because size is optional) */ #define syslogd_example_usage \ - "$ syslogd -R masterlog:514\n" \ - "$ syslogd -R 192.168.1.1:601\n" + "$ syslogd -R masterlog:514\n" \ + "$ syslogd -R 192.168.1.1:601\n" - -#ifndef CONFIG_FEATURE_FANCY_TAIL -# define USAGE_UNSIMPLE_TAIL(a) -#else -# define USAGE_UNSIMPLE_TAIL(a) a -#endif #define tail_trivial_usage \ - "[OPTION]... [FILE]..." + "[OPTION]... [FILE]..." #define tail_full_usage \ - "Print last 10 lines of each FILE to standard output.\n" \ - "With more than one FILE, precede each with a header giving the\n" \ - "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ - "Options:\n" \ - USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \ - "\t-n N[kbm]\tprint last N lines instead of last 10\n" \ - "\t-f\t\toutput data as the file grows" \ - USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \ - "\t-s SEC\t\twait SEC seconds between reads with -f\n" \ - "\t-v\t\talways output headers giving file names\n\n" \ - "If the first character of N (bytes or lines) is a '+', output begins with \n" \ - "the Nth item from the start of each file, otherwise, print the last N items\n" \ - "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) + "Print last 10 lines of each FILE to standard output.\n" \ + "With more than one FILE, precede each with a header giving the\n" \ + "file name. With no FILE, or when FILE is -, read standard input." \ + "\n\nOptions:" \ + USE_FEATURE_FANCY_TAIL( \ + "\n -c N[kbm] Output the last N bytes") \ + "\n -n N[kbm] Print last N lines instead of last 10" \ + "\n -f Output data as the file grows" \ + USE_FEATURE_FANCY_TAIL( \ + "\n -q Never output headers giving file names" \ + "\n -s SEC Wait SEC seconds between reads with -f" \ + "\n -v Always output headers giving file names" \ + "\n\n" \ + "If the first character of N (bytes or lines) is a '+', output begins with\n" \ + "the Nth item from the start of each file, otherwise, print the last N items\n" \ + "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) #define tail_example_usage \ - "$ tail -n 1 /etc/resolv.conf\n" \ - "nameserver 10.0.0.1\n" - -#ifdef CONFIG_FEATURE_TAR_CREATE -# define USAGE_TAR_CREATE(a) a -#else -# define USAGE_TAR_CREATE(a) -#endif -#ifdef CONFIG_FEATURE_TAR_EXCLUDE -# define USAGE_TAR_EXCLUDE(a) a -#else -# define USAGE_TAR_EXCLUDE(a) -#endif -#ifdef CONFIG_FEATURE_TAR_GZIP -# define USAGE_TAR_GZIP(a) a -#else -# define USAGE_TAR_GZIP(a) -#endif -#ifdef CONFIG_FEATURE_TAR_BZIP2 -# define USAGE_TAR_BZIP2(a) a -#else -# define USAGE_TAR_BZIP2(a) -#endif -#ifdef CONFIG_FEATURE_TAR_LZMA -# define USAGE_TAR_LZMA(a) a -#else -# define USAGE_TAR_LZMA(a) -#endif -#ifdef CONFIG_FEATURE_TAR_COMPRESS -# define USAGE_TAR_COMPRESS(a) a -#else -# define USAGE_TAR_COMPRESS(a) -#endif + "$ tail -n 1 /etc/resolv.conf\n" \ + "nameserver 10.0.0.1\n" #define tar_trivial_usage \ - "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_LZMA("a") USAGE_TAR_COMPRESS("Z") "xtvO] " \ - USAGE_TAR_EXCLUDE("[-X FILE]") \ - "[-f TARFILE] [-C DIR] [FILE(s)] ..." + "-[" USE_FEATURE_TAR_CREATE("c") USE_FEATURE_TAR_GZIP("z") \ + USE_FEATURE_TAR_BZIP2("j") USE_FEATURE_TAR_LZMA("a") \ + USE_FEATURE_TAR_COMPRESS("Z") "xtvO] " \ + USE_FEATURE_TAR_FROM("[-X FILE] ") \ + "[-f TARFILE] [-C DIR] [FILE(s)] ..." #define tar_full_usage \ - "Create, extract, or list files from a tar file.\n\n" \ - "Options:\n" \ - USAGE_TAR_CREATE("\tc\t\tcreate\n") \ - "\tx\t\textract\n" \ - "\tt\t\tlist\n" \ - "\nArchive format selection:\n" \ - USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \ - USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \ - USAGE_TAR_LZMA("\ta\t\tFilter the archive through lzma\n") \ - USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \ - "\nFile selection:\n" \ - "\tf\t\tname of TARFILE or \"-\" for stdin\n" \ - "\tO\t\textract to stdout\n" \ - USAGE_TAR_EXCLUDE( \ - "\texclude\t\tfile to exclude\n" \ - "\tX\t\tfile with names to exclude\n" \ - ) \ - "\tC\t\tchange to directory DIR before operation\n" \ - "\tv\t\tverbosely list files processed" + "Create, extract, or list files from a tar file" \ + "\n\nOptions:\n" \ + USE_FEATURE_TAR_CREATE( \ + " c Create\n") \ + " x Extract\n" \ + " t List\n" \ + "\nArchive format selection:\n" \ + USE_FEATURE_TAR_GZIP( \ + " z Filter the archive through gzip\n") \ + USE_FEATURE_TAR_BZIP2( \ + " j Filter the archive through bzip2\n") \ + USE_FEATURE_TAR_LZMA( \ + " a Filter the archive through lzma\n") \ + USE_FEATURE_TAR_COMPRESS( \ + " Z Filter the archive through compress\n") \ + "\nFile selection:\n" \ + " f Name of TARFILE or \"-\" for stdin\n" \ + " O Extract to stdout\n" \ + USE_FEATURE_TAR_FROM( \ + " exclude File to exclude\n" \ + " X File with names to exclude\n") \ + " C Change to directory DIR before operation\n" \ + " v Verbosely list files processed" #define tar_example_usage \ - "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ - "$ tar -cf /tmp/tarball.tar /usr/local\n" + "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ + "$ tar -cf /tmp/tarball.tar /usr/local\n" + +#define taskset_trivial_usage \ + "[OPTIONS] [mask] [pid | command [arg]...]" +#define taskset_full_usage \ + "Set or get CPU affinity" \ + "\n\nOptions:\n" \ + " -p Operate on an existing PID" +#define taskset_example_usage \ + "$ taskset 0x7 ./dgemm_test&\n" \ + "$ taskset -p 0x1 $!\n" \ + "pid 4790's current affinity mask: 7\n" \ + "pid 4790's new affinity mask: 1\n" \ + "$ taskset 0x7 /bin/sh -c './taskset -p 0x1 $$'\n" \ + "pid 6671's current affinity mask: 1\n" \ + "pid 6671's new affinity mask: 1\n" \ + "$ taskset -p 1\n" \ + "pid 1's current affinity mask: 3\n" #define tee_trivial_usage \ - "[OPTION]... [FILE]..." + "[OPTION]... [FILE]..." #define tee_full_usage \ - "Copy standard input to each FILE, and also to standard output.\n\n" \ - "Options:\n" \ - "\t-a\tappend to the given FILEs, do not overwrite\n" \ - "\t-i\tignore interrupt signals (SIGINT)" + "Copy standard input to each FILE, and also to standard output" \ + "\n\nOptions:\n" \ + " -a Append to the given FILEs, do not overwrite\n" \ + " -i Ignore interrupt signals (SIGINT)" #define tee_example_usage \ - "$ echo \"Hello\" | tee /tmp/foo\n" \ - "$ cat /tmp/foo\n" \ - "Hello\n" + "$ echo \"Hello\" | tee /tmp/foo\n" \ + "$ cat /tmp/foo\n" \ + "Hello\n" #ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN #define telnet_trivial_usage \ - "[-a] [-l USER] HOST [PORT]" + "[-a] [-l USER] HOST [PORT]" #define telnet_full_usage \ - "Telnet is used to establish interactive communication with another\n" \ - "computer over a network using the TELNET protocol.\n\n" \ - "Options:\n" \ - "\t-a\t\tAttempt an automatic login with the USER variable\n" \ - "\t-l USER\t\tAttempt an automatic login with the USER argument\n" \ - "\tHOST\t\tThe official name, alias or the IP address of the\n" \ - "\t\t\tremote host.\n" \ - "\tPORT\t\tThe remote port number to connect to. If it is not\n" \ - "\t\t\tspecified, the default telnet (23) port is used." + "Connect to remote telnet server" \ + "\n\nOptions:\n" \ + " -a Attempt an automatic login with the USER variable\n" \ + " -l USER Attempt an automatic login with the USER argument\n" \ + " HOST The official name, alias or the IP address of the\n" \ + " remote host\n" \ + " PORT The remote port number to connect to. If it is not\n" \ + " specified, the default telnet (23) port is used." #else #define telnet_trivial_usage \ - "HOST [PORT]" + "HOST [PORT]" #define telnet_full_usage \ - "Telnet is used to establish interactive communication with another\n" \ - "computer over a network using the TELNET protocol." + "Connect to remote telnet server" #endif -#ifdef CONFIG_FEATURE_TELNETD_INETD -#define telnetd_trivial_usage \ - "(inetd mode) [OPTION]" -#define telnetd_full_usage \ - "Telnetd uses incoming TELNET connections via inetd.\n" \ - "Options:\n" \ - "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \ - "\t-f issue_file\tDisplay issue_file instead of /etc/issue" -#else #define telnetd_trivial_usage \ - "[OPTION]" + "[OPTION]" #define telnetd_full_usage \ - "Telnetd listens for incoming TELNET connections on PORT.\n" \ - "Options:\n" \ - "\t-p PORT\tlisten for connections on PORT (default 23)\n" \ - "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \ - "\t-f issue_file\tDisplay issue_file instead of /etc/issue" -#endif + "Handle incoming telnet connections" \ + SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \ + "\n\nOptions:" \ + "\n -l LOGIN Exec LOGIN on connect" \ + "\n -f issue_file Display issue_file instead of /etc/issue" \ + USE_FEATURE_TELNETD_STANDALONE( \ + "\n -p PORT Port to listen to" \ + "\n -b ADDR Address to bind to" \ + "\n -F Stay in foreground" \ + "\n -i Run as inetd subservice" \ + ) #define test_trivial_usage \ - "EXPRESSION\n or [ EXPRESSION ]" + "EXPRESSION\n or [ EXPRESSION ]" #define test_full_usage \ - "Checks file types and compares values returning an exit\n" \ - "code determined by the value of EXPRESSION." + "Check file types and compares values returning an exit code\n" \ + "determined by the value of EXPRESSION" #define test_example_usage \ - "$ test 1 -eq 2\n" \ - "$ echo $?\n" \ - "1\n" \ - "$ test 1 -eq 1\n" \ - "$ echo $?\n" \ - "0\n" \ - "$ [ -d /etc ]\n" \ - "$ echo $?\n" \ - "0\n" \ - "$ [ -d /junk ]\n" \ - "$ echo $?\n" \ - "1\n" - -#ifdef CONFIG_FEATURE_TFTP_GET -# define USAGE_TFTP_GET(a) a -#else -# define USAGE_TFTP_GET(a) -#endif -#ifdef CONFIG_FEATURE_TFTP_PUT -# define USAGE_TFTP_PUT(a) a -#else -# define USAGE_TFTP_PUT(a) -#endif -#ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE -# define USAGE_TFTP_BS(a) a -#else -# define USAGE_TFTP_BS(a) -#endif + "$ test 1 -eq 2\n" \ + "$ echo $?\n" \ + "1\n" \ + "$ test 1 -eq 1\n" \ + "$ echo $?\n" \ + "0\n" \ + "$ [ -d /etc ]\n" \ + "$ echo $?\n" \ + "0\n" \ + "$ [ -d /junk ]\n" \ + "$ echo $?\n" \ + "1\n" #define tftp_trivial_usage \ - "[OPTION]... HOST [PORT]" + "[OPTION]... HOST [PORT]" #define tftp_full_usage \ - "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \ - "Options:\n" \ - "\t-l FILE\tLocal FILE\n" \ - "\t-r FILE\tRemote FILE" \ - USAGE_TFTP_GET( \ - "\n\t-g\tGet file" \ + "Transfer a file from/to tftp server using \"octet\" mode" \ + "\n\nOptions:" \ + "\n -l FILE Local FILE" \ + "\n -r FILE Remote FILE" \ + USE_FEATURE_TFTP_GET( \ + "\n -g Get file" \ ) \ - USAGE_TFTP_PUT( \ - "\n\t-p\tPut file" \ + USE_FEATURE_TFTP_PUT( \ + "\n -p Put file" \ ) \ - USAGE_TFTP_BS( \ - "\n\t-b SIZE\tTransfer blocks of SIZE octets" \ + USE_FEATURE_TFTP_BLOCKSIZE( \ + "\n -b SIZE Transfer blocks of SIZE octets" \ ) #define time_trivial_usage \ - "[OPTION]... COMMAND [ARGS...]" + "[OPTION]... COMMAND [ARGS...]" #define time_full_usage \ - "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ - "COMMAND's resource usage information is displayed\n\n" \ - "Options:\n" \ - "\t-v\tDisplays verbose resource usage information" + "Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ + "COMMAND's resource usage information is displayed." \ + "\n\nOptions:\n" \ + " -v Display verbose resource usage information" #define top_trivial_usage \ - "[-d ]" + "[-b] [-n count] [-d seconds]" #define top_full_usage \ - "top provides an view of processor activity in real time.\n" \ - "This utility reads the status for all processes in /proc each \n" \ - "and shows the status for however many processes will fit on the screen.\n" \ - "This utility will not show processes that are started after program startup,\n" \ - "but it will show the EXIT status for and PIDs that exit while it is running." + "Provide a view of process activity in real time.\n" \ + "Read the status of all processes from /proc each \n" \ + "and show the status for however many processes will fit on the screen." #define touch_trivial_usage \ - "[-c] FILE [FILE ...]" + "[-c] FILE [FILE ...]" #define touch_full_usage \ - "Update the last-modified date on the given FILE[s].\n\n" \ - "Options:\n" \ - "\t-c\tDo not create any files" + "Update the last-modified date on the given FILE[s]" \ + "\n\nOptions:\n" \ + " -c Do not create any files" #define touch_example_usage \ - "$ ls -l /tmp/foo\n" \ - "/bin/ls: /tmp/foo: No such file or directory\n" \ - "$ touch /tmp/foo\n" \ - "$ ls -l /tmp/foo\n" \ - "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" + "$ ls -l /tmp/foo\n" \ + "/bin/ls: /tmp/foo: No such file or directory\n" \ + "$ touch /tmp/foo\n" \ + "$ ls -l /tmp/foo\n" \ + "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" #define tr_trivial_usage \ - "[-cds] STRING1 [STRING2]" + "[-cds] STRING1 [STRING2]" #define tr_full_usage \ - "Translate, squeeze, and/or delete characters from\n" \ - "standard input, writing to standard output.\n\n" \ - "Options:\n" \ - "\t-c\ttake complement of STRING1\n" \ - "\t-d\tdelete input characters coded STRING1\n" \ - "\t-s\tsqueeze multiple output characters of STRING2 into one character" + "Translate, squeeze, and/or delete characters from\n" \ + "standard input, writing to standard output" \ + "\n\nOptions:\n" \ + " -c Take complement of STRING1\n" \ + " -d Delete input characters coded STRING1\n" \ + " -s Squeeze multiple output characters of STRING2 into one character" #define tr_example_usage \ - "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ - "hello world\n" + "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ + "hello world\n" #define traceroute_trivial_usage \ - "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ - "\t[-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ - "\t[-z pausemsecs] host [data size]" + "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ + " [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ + " [-z pausemsecs] host [data size]" #define traceroute_full_usage \ - "trace the route ip packets follow going to \"host\"\n" \ - "Options:\n" \ - "\t-F\tSet the don't fragment bit\n" \ - "\t-I\tUse ICMP ECHO instead of UDP datagrams\n" \ - "\t-l\tDisplay the ttl value of the returned packet\n" \ - "\t-d\tSet SO_DEBUG options to socket\n" \ - "\t-n\tPrint hop addresses numerically rather than symbolically\n" \ - "\t-r\tBypass the normal routing tables and send directly to a host\n" \ - "\t-v\tVerbose output\n" \ - "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \ - "\t-p port#\tSet the base UDP port number used in probes\n" \ - "\t\t(default is 33434)\n" \ - "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \ - "\t\t(default is 3)\n" \ - "\t-s src_addr\tUse the following IP address as the source address\n" \ - "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \ - "\t\t(default 0)\n" \ - "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \ - "\t\t(default 3 sec)\n" \ - "\t-g\tSpecify a loose source route gateway (8 maximum)" + "Trace the route ip packets follow going to \"host\"" \ + "\n\nOptions:\n" \ + " -F Set the don't fragment bit\n" \ + " -I Use ICMP ECHO instead of UDP datagrams\n" \ + " -l Display the ttl value of the returned packet\n" \ + " -d Set SO_DEBUG options to socket\n" \ + " -n Print hop addresses numerically rather than symbolically\n" \ + " -r Bypass the normal routing tables and send directly to a host\n" \ + " -v Verbose output\n" \ + " -m max_ttl Set the max time-to-live (max number of hops)\n" \ + " -p port# Set the base UDP port number used in probes\n" \ + " (default is 33434)\n" \ + " -q nqueries Set the number of probes per 'ttl' to nqueries\n" \ + " (default is 3)\n" \ + " -s src_addr Use the following IP address as the source address\n" \ + " -t tos Set the type-of-service in probe packets to the following value\n" \ + " (default 0)\n" \ + " -w wait Set the time (in seconds) to wait for a response to a probe\n" \ + " (default 3 sec)\n" \ + " -g Specify a loose source route gateway (8 maximum)" #define true_trivial_usage \ - "" + "" #define true_full_usage \ - "Return an exit code of TRUE (0)." + "Return an exit code of TRUE (0)" #define true_example_usage \ - "$ true\n" \ - "$ echo $?\n" \ - "0\n" + "$ true\n" \ + "$ echo $?\n" \ + "0\n" #define tty_trivial_usage \ - "" + "" #define tty_full_usage \ - "Print the file name of the terminal connected to standard input.\n\n" \ - "Options:\n" \ - "\t-s\tprint nothing, only return an exit status" + "Print the file name of the terminal connected to standard input" \ + "\n\nOptions:\n" \ + " -s Print nothing, only return an exit status" #define tty_example_usage \ - "$ tty\n" \ - "/dev/tty2\n" + "$ tty\n" \ + "/dev/tty2\n" #define tune2fs_trivial_usage \ - "[-c max-mounts-count] [-e errors-behavior] [-g group] " \ - "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \ - "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \ - "[-r reserved-blocks-count] [-u user] [-C mount-count] " \ - "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \ - "[-T last-check-time] [-U UUID] device" + "[-c max-mounts-count] [-e errors-behavior] [-g group] " \ + "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \ + "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \ + "[-r reserved-blocks-count] [-u user] [-C mount-count] " \ + "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \ + "[-T last-check-time] [-U UUID] device" #define tune2fs_full_usage \ - "Adjust filesystem options on ext[23] filesystems." + "Adjust filesystem options on ext[23] filesystems" #define udhcpc_trivial_usage \ - "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]" + "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]" #define udhcpc_full_usage \ - "\t-c,\t--clientid=CLIENTID\tSet client identifier\n" \ - "\t-C,\t--clientid-none\tSuppress default client identifier\n" \ - "\t-V,\t--vendorclass=CLASSID\tSet vendor class identifier\n" \ - "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \ - "\t-h,\t \tAlias for -H\n" \ - "\t-f,\t--foreground\tDo not fork after getting lease\n" \ - "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated\n" \ - "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \ - "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated\n" \ - "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \ - "\t-q,\t--quit\tQuit after obtaining lease\n" \ - "\t-r,\t--request=IP\tIP address to request (default: none)\n" \ - "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \ - "\t-t,\t--retries=NUM\tSend up to NUM request packets\n"\ - "\t-v,\t--version\tDisplay version" + " -V,--vendorclass=CLASSID Set vendor class identifier\n" \ + " -i,--interface=INTERFACE Interface to use (default: eth0)\n" \ + " -H,-h,--hostname=HOSTNAME Client hostname\n" \ + " -c,--clientid=CLIENTID Set client identifier\n" \ + " -C,--clientid-none Suppress default client identifier\n" \ + " -p,--pidfile=file Store process ID of daemon in file\n" \ + " -r,--request=IP IP address to request (default: none)\n" \ + " -s,--script=file Run file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \ + " -t,--retries=NUM Send up to NUM request packets\n"\ + " -f,--foreground Do not fork after getting lease\n" \ + " -b,--background Fork to background if lease cannot be immediately negotiated\n" \ + " -n,--now Exit with failure if lease cannot be immediately negotiated\n" \ + " -q,--quit Quit after obtaining lease\n" \ + " -R,--release Release IP on quit\n" \ + " -v,--version Display version" \ #define udhcpd_trivial_usage \ - "[configfile]\n" \ + "[configfile]\n" \ #define udhcpd_full_usage \ - "" + "" -#ifdef CONFIG_FEATURE_MOUNT_FORCE -# define USAGE_MOUNT_FORCE(a) a -#else -# define USAGE_MOUNT_FORCE(a) -#endif #define umount_trivial_usage \ - "[flags] FILESYSTEM|DIRECTORY" + "[flags] FILESYSTEM|DIRECTORY" #define umount_full_usage \ - "Unmount file systems\n" \ - "\nFlags:\n" "\t-a\tUnmount all file systems" \ - USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \ - "\n\t-r\tTry to remount devices as read-only if mount is busy" \ - "\n\t-l\tLazy umount (detach filesystem)" \ - "\n\t-f\tForce umount (i.e., unreachable NFS server)" \ - USAGE_MOUNT_LOOP("\n\t-D\tDo not free loop device (if a loop device has been used)") + "Unmount file systems" \ + "\n\nOptions:\n" \ + "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \ + USE_FEATURE_MTAB_SUPPORT( \ + "\n -n Don't erase /etc/mtab entries") \ + "\n -r Try to remount devices as read-only if mount is busy" \ + "\n -l Lazy umount (detach filesystem)" \ + "\n -f Force umount (i.e., unreachable NFS server)" \ + USE_FEATURE_MOUNT_LOOP( \ + "\n -D Do not free loop device (if a loop device has been used)") #define umount_example_usage \ - "$ umount /dev/hdc1 \n" + "$ umount /dev/hdc1\n" #define uname_trivial_usage \ - "[OPTION]..." + "[OPTION]..." #define uname_full_usage \ - "Print certain system information. With no OPTION, same as -s.\n\n" \ - "Options:\n" \ - "\t-a\tprint all information\n" \ - "\t-m\tthe machine (hardware) type\n" \ - "\t-n\tprint the machine's network node hostname\n" \ - "\t-r\tprint the operating system release\n" \ - "\t-s\tprint the operating system name\n" \ - "\t-p\tprint the host processor type\n" \ - "\t-v\tprint the operating system version" + "Print certain system information. With no OPTION, same as -s." \ + "\n\nOptions:\n" \ + " -a Print all information\n" \ + " -m The machine (hardware) type\n" \ + " -n Print the machine's network node hostname\n" \ + " -r Print the operating system release\n" \ + " -s Print the operating system name\n" \ + " -p Print the host processor type\n" \ + " -v Print the operating system version" #define uname_example_usage \ - "$ uname -a\n" \ - "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" + "$ uname -a\n" \ + "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" #define uncompress_trivial_usage \ - "[-c] [-f] [ name ... ]" + "[-c] [-f] [ name ... ]" #define uncompress_full_usage \ - "Uncompress .Z file[s]\n" \ - "Options:\n" \ - "\t-c\textract to stdout\n" \ - "\t-f\tforce overwrite an existing file" + "Uncompress .Z file[s]" \ + "\n\nOptions:\n" \ + " -c Extract to stdout\n" \ + " -f Force overwrite an existing file" #define uniq_trivial_usage \ - "[-fscdu]... [INPUT [OUTPUT]]" + "[-fscdu]... [INPUT [OUTPUT]]" #define uniq_full_usage \ - "Discard all but one of successive identical lines from INPUT\n" \ - "(or standard input), writing to OUTPUT (or standard output).\n\n" \ - "Options:\n" \ - "\t-c\tprefix lines by the number of occurrences\n" \ - "\t-d\tonly print duplicate lines\n" \ - "\t-u\tonly print unique lines\n" \ - "\t-f N\tskip the first N fields\n" \ - "\t-s N\tskip the first N chars (after any skipped fields)" + "Discard all but one of successive identical lines from INPUT\n" \ + "(or standard input), writing to OUTPUT (or standard output)" \ + "\n\nOptions:\n" \ + " -c Prefix lines by the number of occurrences\n" \ + " -d Only print duplicate lines\n" \ + " -u Only print unique lines\n" \ + " -f N Skip the first N fields\n" \ + " -s N Skip the first N chars (after any skipped fields)" #define uniq_example_usage \ - "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ - "a\n" \ - "b\n" \ - "c\n" + "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ + "a\n" \ + "b\n" \ + "c\n" #define unix2dos_trivial_usage \ - "[option] [FILE]" + "[option] [FILE]" #define unix2dos_full_usage \ - "Converts FILE from unix format to dos format. When no option\n" \ - "is given, the input is converted to the opposite output format.\n" \ - "When no file is given, uses stdin for input and stdout for output.\n" \ - "Options:\n" \ - "\t-u\toutput will be in UNIX format\n" \ - "\t-d\toutput will be in DOS format" + "Convert FILE from unix format to dos format. When no option\n" \ + "is given, the input is converted to the opposite output format.\n" \ + "When no file is given, use stdin for input and stdout for output." \ + "\n\nOptions:\n" \ + " -u Output will be in UNIX format\n" \ + " -d Output will be in DOS format" #define unzip_trivial_usage \ - "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" + "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" #define unzip_full_usage \ - "Extracts files from ZIP archives.\n\n" \ - "Options:\n" \ - "\t-l\tlist archive contents (short form)\n" \ - "\t-n\tnever overwrite existing files (default)\n" \ - "\t-o\toverwrite files without prompting\n" \ - "\t-p\tsend output to stdout\n" \ - "\t-q\tbe quiet\n" \ - "\t-x\texclude these files\n" \ - "\t-d\textract files into this directory" + "Extract files from ZIP archives" \ + "\n\nOptions:\n" \ + " -l List archive contents (short form)\n" \ + " -n Never overwrite existing files (default)\n" \ + " -o Overwrite files without prompting\n" \ + " -p Send output to stdout\n" \ + " -q Be quiet\n" \ + " -x Exclude these files\n" \ + " -d Extract files into this directory" #define uptime_trivial_usage \ - "" + "" #define uptime_full_usage \ - "Display the time since the last boot." + "Display the time since the last boot" #define uptime_example_usage \ - "$ uptime\n" \ - " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" + "$ uptime\n" \ + " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" #define usleep_trivial_usage \ - "N" + "N" #define usleep_full_usage \ - "Pause for N microseconds." + "Pause for N microseconds" #define usleep_example_usage \ - "$ usleep 1000000\n" \ - "[pauses for 1 second]\n" + "$ usleep 1000000\n" \ + "[pauses for 1 second]\n" #define uudecode_trivial_usage \ - "[FILE]..." + "[FILE]..." #define uudecode_full_usage \ - "Uudecode a file that is uuencoded.\n\n" \ - "Options:\n" \ - "\t-o FILE\tdirect output to FILE" + "Uudecode a file" \ + "\n\nOptions:\n" \ + " -o FILE Direct output to FILE" #define uudecode_example_usage \ - "$ uudecode -o busybox busybox.uu\n" \ - "$ ls -l busybox\n" \ - "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" + "$ uudecode -o busybox busybox.uu\n" \ + "$ ls -l busybox\n" \ + "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" #define uuencode_trivial_usage \ - "[OPTION] [INFILE] REMOTEFILE" + "[OPTION] [INFILE] REMOTEFILE" #define uuencode_full_usage \ - "Uuencode a file.\n\n" \ - "Options:\n" \ - "\t-m\tuse base64 encoding per RFC1521" + "Uuencode a file" \ + "\n\nOptions:\n" \ + " -m Use base64 encoding per RFC1521" #define uuencode_example_usage \ - "$ uuencode busybox busybox\n" \ - "begin 755 busybox\n" \ - "\n" \ - "$ uudecode busybox busybox > busybox.uu\n" \ - "$\n" + "$ uuencode busybox busybox\n" \ + "begin 755 busybox\n" \ + "\n" \ + "$ uudecode busybox busybox > busybox.uu\n" \ + "$\n" #define vconfig_trivial_usage \ - "COMMAND [OPTIONS] ..." + "COMMAND [OPTIONS] ..." #define vconfig_full_usage \ - "vconfig lets you create and remove virtual ethernet devices.\n\n" \ - "Options:\n" \ - "\tadd [interface-name] [vlan_id]\n" \ - "\trem [vlan-name]\n" \ - "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \ - "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ - "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ - "\tset_name_type [name-type]" + "Create and remove virtual ethernet devices" \ + "\n\nOptions:\n" \ + " add [interface-name] [vlan_id]\n" \ + " rem [vlan-name]\n" \ + " set_flag [interface-name] [flag-num] [0 | 1]\n" \ + " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ + " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ + " set_name_type [name-type]" #define vi_trivial_usage \ - "[OPTION] [FILE]..." + "[OPTION] [FILE]..." #define vi_full_usage \ - "edit FILE.\n\n" \ - "Options:\n" \ - "\t-R\tRead-only- do not write to the file" + "Edit FILE" \ + "\n\nOptions:\n" \ + " -R Read-only - do not write to the file" #define vlock_trivial_usage \ - "[OPTIONS]" + "[OPTIONS]" #define vlock_full_usage \ - "Lock a virtual terminal. A password is required to unlock\n" \ - "Options:\n" \ - "\t-a\tLock all VTs" + "Lock a virtual terminal. A password is required to unlock." \ + "\n\nOptions:\n" \ + " -a Lock all VTs" #define watch_trivial_usage \ - "[-n ] COMMAND..." + "[-n ] [-t] COMMAND..." #define watch_full_usage \ - "Executes a program periodically.\n" \ - "Options:\n" \ - "\t-n\tLoop period in seconds - default is 2" + "Execute a program periodically" \ + "\n\nOptions:\n" \ + " -n Loop period in seconds - default is 2\n" \ + " -t Don't print header" #define watch_example_usage \ - "$ watch date\n" \ - "Mon Dec 17 10:31:40 GMT 2000\n" \ - "Mon Dec 17 10:31:42 GMT 2000\n" \ - "Mon Dec 17 10:31:44 GMT 2000" + "$ watch date\n" \ + "Mon Dec 17 10:31:40 GMT 2000\n" \ + "Mon Dec 17 10:31:42 GMT 2000\n" \ + "Mon Dec 17 10:31:44 GMT 2000" #define watchdog_trivial_usage \ - "[-t ] DEV" + "[-t ] [-F] DEV" #define watchdog_full_usage \ - "Periodically write to watchdog device DEV.\n" \ - "Options:\n" \ - "\t-t\tTimer period in seconds - default is 30" + "Periodically write to watchdog device DEV" \ + "\n\nOptions:\n" \ + " -t Timer period in seconds - default is 30\n" \ + " -F Stay in the foreground and don't fork" #define wc_trivial_usage \ - "[OPTION]... [FILE]..." + "[OPTION]... [FILE]..." #define wc_full_usage \ - "Print line, word, and byte counts for each FILE, and a total line if\n" \ - "more than one FILE is specified. With no FILE, read standard input.\n\n" \ - "Options:\n" \ - "\t-c\tprint the byte counts\n" \ - "\t-l\tprint the newline counts\n" \ - "\t-L\tprint the length of the longest line\n" \ - "\t-w\tprint the word counts" + "Print line, word, and byte counts for each FILE, and a total line if\n" \ + "more than one FILE is specified. With no FILE, read standard input." \ + "\n\nOptions:\n" \ + " -c Print the byte counts\n" \ + " -l Print the newline counts\n" \ + " -L Print the length of the longest line\n" \ + " -w Print the word counts" #define wc_example_usage \ - "$ wc /etc/passwd\n" \ - " 31 46 1365 /etc/passwd\n" + "$ wc /etc/passwd\n" \ + " 31 46 1365 /etc/passwd\n" #define wget_trivial_usage \ - "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \ - "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url" + "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \ + " [--header 'header: value'] [-Y|--proxy on/off] [-P DIR]\n" \ + " [-U|--user-agent agent] url" #define wget_full_usage \ - "wget retrieves files via HTTP or FTP\n\n" \ - "Options:\n" \ - "\t-c\tcontinue retrieval of aborted transfers\n" \ - "\t-q\tquiet mode - do not print\n" \ - "\t-P\tSet directory prefix to DIR\n" \ - "\t-O\tsave to filename ('-' for stdout)\n" \ - "\t-Y\tuse proxy ('on' or 'off')" + "Retrieve files via HTTP or FTP" \ + "\n\nOptions:\n" \ + " -c Continue retrieval of aborted transfers\n" \ + " -q Quiet mode - do not print\n" \ + " -P Set directory prefix to DIR\n" \ + " -O Save to filename ('-' for stdout)\n" \ + " -U Adjust 'User-Agent' field\n" \ + " -Y Use proxy ('on' or 'off')" #define which_trivial_usage \ - "[COMMAND ...]" + "[COMMAND ...]" #define which_full_usage \ - "Locates a COMMAND." + "Locate a COMMAND" #define which_example_usage \ - "$ which login\n" \ - "/bin/login\n" + "$ which login\n" \ + "/bin/login\n" #define who_trivial_usage \ - " " + " " #define who_full_usage \ - "Prints the current user names and related information" + "Print the current user names and related information" #define whoami_trivial_usage \ - "" + "" #define whoami_full_usage \ - "Prints the user name associated with the current effective user id." - -#ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION -#define USAGE_XARGS_CONFIRMATION(a) a -#else -#define USAGE_XARGS_CONFIRMATION(a) -#endif -#ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT -#define USAGE_XARGS_TERMOPT(a) a -#else -#define USAGE_XARGS_TERMOPT(a) -#endif -#ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM -#define USAGE_XARGS_ZERO_TERM(a) a -#else -#define USAGE_XARGS_ZERO_TERM(a) -#endif - + "Print the user name associated with the current effective user id" #define xargs_trivial_usage \ - "[COMMAND] [OPTIONS] [ARGS...]" + "[OPTIONS] [COMMAND] [ARGS...]" #define xargs_full_usage \ - "Executes COMMAND on every item given by standard input.\n\n" \ - "Options:\n" \ - USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \ - "\t-r\tDo not run command for empty readed lines\n" \ - USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \ - USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \ - "\t-t\tPrint the command line on stderr before executing it" + "Execute COMMAND on every item given by standard input" \ + "\n\nOptions:\n" \ + USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \ + " -p Prompt the user about whether to run each command\n") \ + " -r Do not run command for empty read lines\n" \ + USE_FEATURE_XARGS_SUPPORT_TERMOPT( \ + " -x Exit if the size is exceeded\n") \ + USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \ + " -0 Input filenames are terminated by a null character\n") \ + " -t Print the command line on stderr before executing it" #define xargs_example_usage \ - "$ ls | xargs gzip\n" \ - "$ find . -name '*.c' -print | xargs rm\n" + "$ ls | xargs gzip\n" \ + "$ find . -name '*.c' -print | xargs rm\n" #define yes_trivial_usage \ - "[OPTION]... [STRING]..." + "[OPTION]... [STRING]..." #define yes_full_usage \ - "Repeatedly outputs a line with all specified STRING(s), or 'y'." + "Repeatedly output a line with all specified STRING(s), or 'y'" #define zcat_trivial_usage \ - "FILE" + "FILE" #define zcat_full_usage \ - "Uncompress to stdout." + "Uncompress to stdout" #define zcip_trivial_usage \ - "[OPTIONS] ifname script" + "[OPTIONS] ifname script" #define zcip_full_usage \ - "zcip manages a ZeroConf IPv4 link-local address.\n" \ - "Options:\n" \ - "\t-f foreground mode\n" \ - "\t-q quit after address (no daemon)\n" \ - "\t-r 169.254.x.x request this address first\n" \ - "\t-v verbose; show version" + "Manage a ZeroConf IPv4 link-local address" \ + "\n\nOptions:\n" \ + " -f foreground mode\n" \ + " -q quit after address (no daemon)\n" \ + " -r 169.254.x.x request this address first\n" \ + " -v verbose" #endif /* __BB_USAGE_H__ */