X-Git-Url: https://git.librecmc.org/?a=blobdiff_plain;f=include%2Fstatus_led.h;h=71a202fe36ec4412a812ebba4589bcd9582bfcca;hb=e04acb2eba4782489417240eff76e20e176aec10;hp=c1fb7f3f23c26ab9fa14114a6697279096cc9fe5;hpb=682011ff6968198da14b89e40d9f55b00f6d91f7;p=oweals%2Fu-boot.git

diff --git a/include/status_led.h b/include/status_led.h
index c1fb7f3f23..71a202fe36 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -43,7 +43,7 @@ void status_led_tick (unsigned long timestamp);
 void status_led_set  (int led, int state);
 
 /*****  TQM8xxL  ********************************************************/
-#if defined(CONFIG_TQM8xxL)
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_HMI10)
 # define STATUS_LED_PAR		im_cpm.cp_pbpar
 # define STATUS_LED_DIR		im_cpm.cp_pbdir
 # define STATUS_LED_ODR		im_cpm.cp_pbodr
@@ -236,6 +236,8 @@ void status_led_set  (int led, int state);
 /*****  NetVia   ********************************************************/
 #elif defined(CONFIG_NETVIA)
 
+#if !defined(CONFIG_NETVIA_VERSION) || CONFIG_NETVIA_VERSION == 1
+
 #define STATUS_LED_PAR		im_ioport.iop_pdpar
 #define STATUS_LED_DIR		im_ioport.iop_pddir
 #undef  STATUS_LED_ODR
@@ -252,11 +254,12 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
+#endif
 
 /*****  CMI   ********************************************************/
 #elif defined(CONFIG_CMI)
-# define STATUS_LED_DIR		im_mios.mios_mpiosm32ddr 
-# define STATUS_LED_DAT		im_mios.mios_mpiosm32dr 
+# define STATUS_LED_DIR		im_mios.mios_mpiosm32ddr
+# define STATUS_LED_DAT		im_mios.mios_mpiosm32dr
 
 # define STATUS_LED_BIT		0x2000		/* Select one of the 16 possible*/
 						/* MIOS outputs */
@@ -266,8 +269,8 @@ void status_led_set  (int led, int state);
 # define STATUS_LED_ACTIVE	1		/* LED on for bit == 0	*/
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-/*****  KUP4K  ********************************************************/
-#elif defined(CONFIG_KUP4K)
+/*****  KUP4K, KUP4X  ****************************************************/
+#elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X) || defined(CONFIG_CCM)
 
 # define STATUS_LED_PAR		im_ioport.iop_papar
 # define STATUS_LED_DIR		im_ioport.iop_padir
@@ -315,12 +318,64 @@ void status_led_set  (int led, int state);
 
 # define STATUS_LED_BOOT        0               /* LED 0 used for boot status */
 
+/*****  HMI10  **********************************************************/
+#elif defined(CONFIG_HMI10)
+# define STATUS_LED_PAR		im_ioport.iop_papar
+# define STATUS_LED_DIR		im_ioport.iop_padir
+# define STATUS_LED_ODR		im_ioport.iop_paodr
+# define STATUS_LED_DAT		im_ioport.iop_padat
+
+# define STATUS_LED_BIT		0x00000001	/* LED is on PA15 */
+# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE	1		/* LED on for bit == 1	*/
+
+# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
+
+/*****  NetPhone   ********************************************************/
+#elif defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
+/* XXX empty just to avoid the error */
+/*****  STx XTc    ********************************************************/
+#elif defined(CONFIG_STXXTC)
+/* XXX empty just to avoid the error */
+/*****  sbc8240   ********************************************************/
+#elif defined(CONFIG_WRSBC8240)
+/* XXX empty just to avoid the error */
 /************************************************************************/
+#elif defined(CONFIG_NIOS2)
+/* XXX empty just to avoid the error */
+/************************************************************************/
+#elif defined(CONFIG_V38B)
+
+# define STATUS_LED_BIT		0x0010			/* Timer7 GPIO */
+# define STATUS_LED_PERIOD	(CFG_HZ / 2)
+# define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
+# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
+
+#elif defined(CONFIG_MOTIONPRO)
+
+#define STATUS_LED_BIT		((vu_long *) MPC5XXX_GPT6_ENABLE)
+#define STATUS_LED_PERIOD	(CFG_HZ / 10)
+#define STATUS_LED_STATE	STATUS_LED_BLINKING
+
+#define STATUS_LED_BIT1		((vu_long *) MPC5XXX_GPT7_ENABLE)
+#define STATUS_LED_PERIOD1	(CFG_HZ / 10)
+#define STATUS_LED_STATE1	STATUS_LED_OFF
+
+#define STATUS_LED_BOOT		0	/* LED 0 used for boot status */
+
 #else
 # error Status LED configuration missing
 #endif
 /************************************************************************/
 
+#ifndef CONFIG_BOARD_SPECIFIC_LED
+# include <asm/status_led.h>
+#endif
+
 #endif	/* CONFIG_STATUS_LED	*/
 
 #endif	/* _STATUS_LED_H_	*/